DP-153/DP-153-L Stepper Drive
|
|
- Marshall Copeland
- 5 years ago
- Views:
Transcription
1 DP-153/DP-153-L Stepper Drive User Manual WUXI XINJE ELECTRIC CO., LTD. NO. DC
2
3 Catalog 1. Summary Characteristic Application Electric characters Operation Guidance Safety Attention Installation Common Terminals Control signal terminals Description of Control signals terminals Sequential chart of control signal Input circuit Power Terminals Description of the terminal Requirement of power supply Wiring Function Setting Current Setting Subdivision Setting Function for Protection Dimension installation and wiring Dimension Installation Typical Wiring Malfunction Diagnoses and Solution Motor Selection i
4 ii
5 1. Summary DP-153/DP-153-L subdivision stepper driver max input voltage is 30VDC, output current is 1.5A. The stepper drive is fit for two- phase hybrid stepper motor whose rated current is below 1.5A. Based on the pure sine wave current control technology, this series product have a good performance in smoothly running with low noise, meets the high resolution requirement of the numerical control equipments, such as laser marking machine, CNC machine etc Characteristic Low noise on motor running. Power supply 30VDC. Effective value of output current can up to 1.5A. Dynamic selection on subdivision with maximal value of 128. Fit for 4, 6, 8 lines two phases stepper motor whose current is below 1.5A. Photo isolator input signal. Easy-operation on current setting and selection by user. Over-heat, over-current protection. Half-current auto-lock function, output short circuit protection Application This series product can well meet the requirement of the small and medium automation devices and instruments, such as aerodynamic marking machine, labeling machine, cutting machine, laser marking machine, plotter, small carving machine, CNC machine etc., especially having a perfect performance on the devices which require low noise and vibration, high precision and speed Electric characters Item Min. value Typical value Max. value Effective value of output current Power supply voltage (VDC) Logic input current (ma) Stepper pulse frequency (KHz) Insulation resistance(mω) Ambient temperature 0 ~50 Max working temperature 60 1
6 Humidity 40%~90% RH (no condensation) Vibration 5.9m/s 2 Max Storage temperature -20 ~65 Dimension 96mm 57mm 22mm 2. Operation Guidance Please read the following suggestion carefully before you install the driver Safety The driver is authorized to be installed and operated by the professionals and technicians. Don t turn on the power before you connect the motor. Make sure that the driver input meets the technical requirements. Don t make the setting or measure operations on the motor and driver during power on. Please do the wiring, installation and parameter setting after power is off for more than 3 minutes. Ensure the connection operation is absolutely correct and fixable before you turn on the power, including the power wire, motor cable and signal cable. Avoid electromagnetic interference Attention Please use shield cable for signal input, and leave each other for distance. The further the distance, the better the interference is avoided. Please connect the motor cover to the GND terminal. Don t operate on the output terminal when power on, or else the driver will be damaged Installation Don t install the driver next to the heat producing appliance. Don t exposure the driver to the dusty, corrosive gas, elevated humidity, and advised to use with small vibration. For perfect conducting, please ensure the fixation between earth wire of host computer, driver, motor and ground. The connecting ground resistor is less than 2 Ω. 2
7 3. Common Terminals PWR COM PUL DIR ENA GND +V A+ A- B+ B Control signal terminals Description of Control signals terminals Signal Function Description PUL DIR Pulse control signals Direction control signals Be available on the rising edge, motor moves a step at the rising edge of pulse turning from low- level to high-level. PUL high voltage is 24V (DP-153-L is 5V), low voltage is 0~0.5V. The direction of motor rotating changed by the switching of pulse between low-level and high-level.once the pulse status is changed, the direction correspondingly turns. The original direction depends on the wiring of motor, which means the phase connection. High voltage is 24V (DP-153- L is 5V), low voltage is 0~0.5V. 3
8 ENA COM Enable/release signal Common terminal for power supply Used for motor release. The stepper will not be active when ENA+ terminal connects to 24V (DP-153-L is 5V) and ENA- connects to low-level, in this case, the driver cuts off current of all phases and in free status, and also the temperature decrease. Please hang these terminals in the air if do not use them. Connect to +24V power supply (DP-153-L is 5V) Sequential chart of control signal In order to ensure the reliability of the system response, please take the following advices. The high-level signal is effective when voltage is 24V (DP-153-L is 5V); the lowlevel signal is effective when in the range of 0V to 0.5V. The ENA (enable) signal should be turned to low-level 3s before DIR (direction) signal or more. Ensure the falling edge of the DIR (direction) signal built 5μs before PUL (pulse) signal or more. The width of pulse should be more than 1.2μs The duration of the low-level pulse should be more than 1.2μs The sequential chart shows as below: Input circuit The connection on common anode way of the drive input circuit is shown as below: 4
9 Note: The input signal is photoelectric isolation. Make sure the control signal driven current is more than 8mA to keep the good conducting of the internal high-speed light-coupler. Optical-coupler current limiting resistor is built in stepper driver. It is common to supply all the control signals with +24V (DP-153-L is 5V) Power Terminals Description of the terminal Terminal Function Description GND DC power supply DC power supply ground terminal ground terminal +V Positive terminal of DC power supply the value is between min voltage and max voltage, it is better to use recommended value A+,A- A-phase of motor Switching the A+ and A- can chagne the motor direction B+,B- B-phase of motor Switching the B+ and B- can chagne the motor direction 5
10 Requirement of power supply Don t connect the power supply terminal in reverse way. To keep the normal working of drive, please ensure the power supply in this range: 12~30VDC. It is better to use non-regulated DC power supply, and make sure the current output of power is 60% higher than setting current of driver. Please ensure the current of power supply is higher than motor working current Wiring DC12~30V GND V+ A+ A- B+ B- 2-Phase Step Motor Note: The motor performance depends on the connection between driver and motor. In most situation, the high-speed performance of motor is based on the power supply (the greater the power supply voltage, the greater the high-speed torque, and avoid step missing), and the output torque is based on the setting current (the greater the setting current, the greater the output torque of motor). However, please pay attention that the motor is getting heat when the setting current is large, and the vibration of low-speed running is serious when the power supply voltagte is large. Above all, please do the connection according to the requirement all the time. There are some typical connections for your reference as below: Parallel connection mode with 8-lines: the setting current value is 1.4 times than motor rated current. Serial connection mode with 8-lines: the setting current value is 70% of the motor rated current. High-speed mode with 4/6 lines: the setting current value should be equal to or lower than the motor rated current. High-torque mode with 6 lines: the setting current value is 70% of the motor rated current. 6
11 3-3. Function Setting The setting of the subdivision precision is based on the status of 3-bits switch. The details are shown as below: SW1~SW3: Set the precision of subdivision. SW4: not used Current Setting Set the current in the range of (0~1.5A) by single-turn potentiometer as below: Subdivision Setting The precision of the subdivision is based on the status of 3-bits switch, as below: 7
12 Subdivision Steps/turn SW1 SW2 SW3 multiple (1.8 /step) ON ON ON ON ON OFF ON OFF ON ON OFF OFF OFF ON ON OFF ON OFF OFF OFF ON OFF OFF OFF 3-4. Function for Protection Indicator LED Power indicator light PWR: Green-light turning on means normal working. Over-heat/over-current protection If the current of motor is 20% higher than the setting value, the protection circuit will cut off the PWM output. Output short circuit protection Note: the drive stops working when the protection circuit is active. After you remove the malfunction and restart the driver, the driver working normally again. 8
13 4. Dimension installation and wiring 4-1. Dimension Unit: mm SW4 SW3 SW2 SW1 Mode Set DP-153 Pulse/rev Table: SW1 SW2 SW3 200 ON ON ON 400 ON ON OFF 800 ON OFF ON 1600 ON OFF OFF 3200 OFF ON ON 6400 OFF ON OFF OFF OFF ON OFF OFF OFF PWR: DC+12V~DC+30V Signal Input PWR Step Motor PWR COM PUL DIR ENA GND +V A+ A- B+ B Installation Install the driver in the well-ventilated cubicle under well protection and check the cooling fans periodically. Please leave at least 10cm around driver for cooling purpose. Avoid dust and moisture. 9
14 4-3. Typical Wiring Note: please separate the power cables (power supply cable, phase cable) and the weak electricity cable in order to avoid interfering. 10
15 5. Malfunction Diagnoses and Solution Malfunction Causation Solution The power light doesn t work The motor doesn t work The direction of motor is incorrect The torque of motor is too small Something wrong with the power supply Check the power supply The voltage of power is not enough Increase the voltage of power Current is too low Reset the current Subdivision is too low Reset the subdivision Protection circuit is active Restart the driver The release signal is low Remove this signal Power off Restart the driver Connection on motor is incorrect Check connection No pulse input Adjust the pulse width and voltage Inverse of phase-sequence Exchange for phase-sequence Disconnection Check connection Acceleration is too high Reduce the pulse acceleration Driver doesn t match with motor Change a suitable driver 11
16 6. Motor Selection The DP-153, DP-153-L is suitable for 4, 6, 8 lines two phases mixed-type stepper motor. Please pay attention to the torque and rated current when choosing a motor. The torque of motor is based on the dimension, the bigger the dimension, the greater the torque. And the current is based on the inductance, the smaller the inductance, the greater the current, and the better the performance of motor at high speed. But when the motor is used with some special connections, the greater the current, the greater the output torque, the motor is getting hot. And the higher the power supply voltage, the greater the high-speed torque. The torque at high-speed is smaller than the one at low-speed. 12
17 WUXI XINJE ELECTRIC CO., LTD. 4th Floor, Building 7th, No.100 Dicui Rd, Wuxi, China Tel: Fax:
DP-304/DP-304-L Stepper Drive
DP-304/DP-304-L Stepper Drive User Manual WUXI XINJE ELECTRIC CO., LTD. NO. DC06 20111128 1.0 Catalog 1. Summary... 1 1-1. Characteristic... 1 1-2. Application... 1 1-3. Electric characters... 1 2. Operation
DP-504/DP-508 Stepper Driver
DP-504/DP-508 Stepper Driver User Manual WUXI XINJE ELECTRIC CO., LTD. NO. DC011 20100811 1.0 DP-504/DP-508 series subdivision driver user s manual Content 1. Summary... 1 1-1. Characteristic... 1 1-2.
DP-504/DP-508 Stepper Driver
DP-504/DP-508 Stepper Driver User s Manual Xinje Electronic Co., Ltd. NO. DC011 20091223 1.0 DP-504/DP-508 series subdivision driver user s manual Content 1. Summary... 1 1-1. Characteristic... 1 1-2.
Operating Manual For Stepper Driver
Contents Table of Contents Operating Manual For Stepper Driver 5042 High Performance Micro stepping Driver Attention: Please read this manual carefully before using the driver! E L E C T R O N I C S 54
User s Manual. For DM542T. Full Digital Stepper Drive
User s Manual For DM542T Full Digital Stepper Drive Designed by StepperOnline Manufactured by Leadshine 2017 All Rights ReservedAttention: Please read this manual carefully before using the drive! #7 Zhongke
MondoStep 7.8. High Performance Microstepping Driver. User s Manual. Version PROBOTIX All Rights Reserved
MondoStep 7.8 High Performance Microstepping Driver User s Manual Version 1.0 2010 PROBOTIX All Rights Reserved Attention: Please read this manual carefully before using the driver! Table of Contents 1.
User s Manual-M752. Stepper Motor Driver. Version All Rights Reserved. Attention: Please read this manual carefully before using the driver!
User s Manual-M752 Stepper Motor Driver Version 1.0 2006 All Rights Reserved Attention: Please read this manual carefully before using the driver! Table of Contents 1. Introduction, Features and Applications
Manual of SM442. High Performance Microstepping Driver. Nietz Electric Co.,Ltd.
Manual of SM442 Nietz Electric Co.,Ltd. Add: No.988, Fulian Rd., Gucun Industry, Baoshan District, Shanghai, China201100 High Performance Microstepping Driver CATALOG 1. Introduction... 1 Introduction...
KL-8070D. Fully Digital Stepping Driver. Table of Contents 1. Introduction, Features and Applications...1 Introduction...1 Features...
Contents KL-8070D Fully Digital Stepping Driver Attention: Please read this manual carefully before using the driver! I Table of Contents 1. Introduction, Features and Applications...1 Introduction......1
User Manual of 2MA2282
ECG-SAVEBASE EMAIL:EBAY@SAVEBASE.COM WEB: HTTP://STORES.EBAY.CO.UK/SAVEBASE User Manual of 2MA2282 High Performance Microstepping Driver ECG-SAVEBASE ECG Safety Statement Easy Commercial Global is not
User s Manual. For DM860T. Fully Digital Stepper Drive. Version 1.0 Designed by StepperOnline All Rights Reserved
User s Manual For DM860T Fully Digital Stepper Drive Version 1.0 Designed by StepperOnline 2017 All Rights Reserved Web site: www.omc-stepperonline.com E-Mail: sales@stepperonline.com Table of Contents
User Manual. Model P403. High Performance Microstepping Driver
User Manual Model P403 High Performance Microstepping Driver 1. General The P403 is a high performance microstepping driver based on the most advanced technology in the world today. It is suitable for
User's Manual. For M542T. High Performance Microstepping Driver. Version All Rights Reserved
User's Manual For M542T High Performance Microstepping Driver Version 1.0.2011 All Rights Reserved Attention: Please read this manual carefully before using the driver! 1. Introduction, Features and Applications
User s Manual. For M542. High Performance Microstepping Driver. Version All Rights Reserved
User s Manual For M542 High Performance Microstepping Driver Version 1.0.2011 All Rights Reserved Attention: Please read this manual carefully before using the driver! Easy Commercial Global Technology
User Manual. Shenzhen Zhongzhi Mechatronics Co., Ltd. Read the manual carefully before operating the driver.
XDM-60 User Manual Shenzhen Zhongzhi Mechatronics Co., Ltd Read the manual carefully before operating the driver. 1 XDM-60 User Manual XDM-60, a new constant-current bipolar chopper drive technology, suitable
User s Manual. For. BH-MSD-4.5A Micro Stepping Driver
User s Manual For BH-MSD-4.5A Micro Stepping Driver Product Number Code For Micro step drive Page 2 BH MSD 4.5A BHOLANATH MICRO STEP DRIVE 4.5 Amp 1:DC power input :20V~50VDC 2.Output current:1.5a-4.5a
User s Manual. For. BH-MSD-2A Micro Stepping Driver
User s Manual For BH-MSD-2A Micro Stepping Driver Product Number Code For Micro step drive Website:-www.bholanath.in Page 2 BH MSD 2A BHOLANATH MICRO STEP DRIVE 2 Amp 1:DC power input :12V~36VDC 2.Output
2 Phase Hybrid Stepping Motor Driver SD-2H044MA Series
SD-2H044MA Series Descriptions 044MA type subdivision type two phase hybrid stepping motor drive, and is designed by HETAI motor and electric APPLIANCE CO., LTD by ourselves. It is suitable for power voltage
M545D. Stepper Motor Driver Specification. Overview. Applications
M545D Stepper Motor Driver Specification Overview The M545D is a new generation microstep stepper motor driver. Due to the adoption of the advanced bipolar constant-current chopper driver technology, it
2 Phase Hybrid Stepping Motor Driver SD-2H086MB Series
SD-2H086MB Series Descriptions 086 MB type subdivision type two phase hybrid stepping motor drive, and is HETAI motor and electric APPLIANCE CO., LTD by ourselves. It is suitable for power voltage 24 V
User s Manual-M860. Stepper Motor Driver. Version All Rights Reserved. Attention: Please read this manual carefully before using the driver!
User s Manual-M860 Stepper Motor Driver Version 1.0 2006 All Rights Reserved Attention: Please read this manual carefully before using the driver! Sunwind Electronics Company Ltd. Add:7th Floor,Block H,Juyin
DM320C. User s Manual. Fully Digital Stepping Driver. For. Version All Rights Reserved
User s Manual For DM320C Fully Digital Stepping Driver Version 1.0 2009 All Rights Reserved Attention: Please read this manual carefully before using the driver! The content in this manual has been carefully
skype:happy_saron
Introduction: DQ86MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 8VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm
RHINO MOTION CONTROLS
Installation Manual and Datasheet http://www.rhinomotioncontrols.com Page 1 [] Key Features Smooth and quiet operation at all speeds and extremely low motor heating Industrial grade performance for 2-Phase
JKD5056S. User's Guide Of Digital Two-Phase Stepper Driver CHANZHOU JKONGMOTOR CO.,LTD. Canada
JKD5056S User's Guide Of Digital Two-Phase Stepper Driver CHANZHOU JKONGMOTO CO.,LTD Contents 1. Products' introduce...1 1. General introduce...1 2. Characteristic...1 3. Application...1 2. Electrical,
MD2U Series 2-Phase Unipolar Stepper Motor Driver
MDU Series -Phase Unipolar Stepper Motor Driver Compact nd High-Performance Of -Phase Stepper Motor Driver Features Unipolar constant current drive type Enable to brake when it stops by STOP current adjustment
MD24 / MD28 Microstepping Driver odul
MD24 / MD28 Microstepping Driver odul Instruction Manual Hardware Description Item-no. 970317 BE001 Last update: 01/2010 isel Germany AG D-36124 Eichenzell Bürgermeister-Ebert-Str. 40 +49/(0)6659/981-700
Compact And High-Performance Of 2-Phase Stepper Motor Driver. RUN current
-Phase Unipolar Stepper Motor Driver Compact nd High-Performance Of -Phase Stepper Motor Driver Features Unipolar constant current drive type Enable to brake when it stops by STOP current adjustment Low
Pure sine wave charger inverter Product Manual
Pure sine wave charger inverter Product Manual The inverter installer must be professional, for the high pressure in the inverter, unprofessional person please do not open it. The inverter should be installed
User s Manual. Table of Contents. Low Cost Microstepping Driver 9. Connection Diagram for Driver, Motor, Controller 12
Table of Contents User s Manual 1. Introduction, Features and Applications 1 2. Specifications and perating Environment 2 For 3. Driver Connectors P1 and P2 3 WS-2H542M 4. Control Signal Connector (P1)
STEPPER-BLOCKplus. Manual. Version: 2.0 As of: 06/2002 Author: Edmund Burger &RPSDFW6WHSSHU'ULYHU IRU3KDVH6WHSSLQJ0RWRUV. Main. Status-LED.
Manual STEPPER-BLOCKplus &RPSDFW6WHSSHU'ULYHU IRU3KDVH6WHSSLQJ0RWRUV Main Status-LED Current Adjustment Controller Motor Version: 2.0 As of: 06/2002 Author: Edmund Burger All rights reserved: MOTRON Steuersysteme
SMD10 SMD11 SMD15 SMD30
SMD10 SMD11 SMD15 SMD30 Step Motor Drivers User Manual JVL Industri Elektronik A/S - January 1992 LB0009-02GB Revision 11th Feb 98 Contents 1.1 Introduction 2 1.2 Overview of Driver Models 3 1.3 Front
The information in this chapter will enable you to: 90VAC to 50/60 Hz
C H A P T E R ➃ Hardware Reference The information in this chapter will enable you to: Use this chapter as a quick-reference tool for most system specifications (dimensions and performance) Use this chapter
0.6A, 1.5A, 2.25A, 3A/Phase
2-Phase Bipolar motor Driver Compact 2-Phase stepper motor driver Features Easy installation with compact size(w85 H21 D64mm) Bipolar constant current drive type Current decay mode decreases vibration
The smart actuator is a complete drive system with electronic, able to detect position and / or can be interfaced via a communication bus.
Mechatronic systems Stepper motor with integrated driver Standard version Low noise version. Dimensions. Interface... 8660-20 1/2 & 1/8 step 1/8 & 1/256 step Pb RoHS compliant 2002/95/EC 57.2 x 57.2 x
DMD4022. User s Manual. Fully Digital Stepping Driver. For. Version All Rights Reserved
User s Manual For DMD4022 Fully Digital Stepping Driver Version 1.0 2009 All Rights Reserved Attention: Please read this manual carefully before using the driver! Contents The content in this manual has
2: A, B 3: A, B, Z 4: A, A _, B, B _ 6: A, A _, B, B _, Z, Z _
Diameter mm Shaft Type/Hollow Type/Built-In Type Incremental Rotary Encoder Features Diameter mm flange type Suitable for measuring angle, position, revolution, speed, acceleration and distance Power supply:
35 35A 50 50A 1 Single phase. Solid state power controller
Single Phase, Power Controller Single Phase, Power Controller Features Various and simple input specification DC4-2mA, 1-5VDC, External 24VDC External adjuster (1kΩ) External contact (ON/OFF) Various function
DD8727T4V1 stepper motor driver product manual (English version)
DD8727T4V1 stepper motor driver product manual (English version) 1 DD8727T4V1stepper moto driver 1. Introduction Adopting the chip manufactured by Japan Sanyo, DD8727T4V1 is a high sub-division two- phase
HYBRID STEPPER MOTOR DRIVER. Model: 2LD880H. MotionKing (China) Motor Industry Co., Ltd. 1. Introduction, Features and Applications
TWO-PHASE Full Digital HYBRID STEPPER MOTOR DRIVER Model: 2LD880H 1. Introduction, Features and Applications Introduction The 2LD880H is a high performance microstepping driver based on pure-sinusoidal
YSmart Technology Co., Ltd. User Manual. GTI Grid Series. GTI Series Inverters for Grid-connected PV system
YSmart Technology Co., Ltd. User Manual Contact Us Address: No. 30 XinFeng Road,Potoubei Village,Ailian Town,Longgang Dist, Shenzhen 51872,P.R. China Tel: (86)755-85232255 Fax: (86)755-85232255 Email :
Analog Output Terminal
Analog Output Terminal I/O Interface Converts Binary Data into Analog Output Data Two outputs available. High resolution of 1/6000. Conversion is possible within a range of 5% to 105% FS. High conversion
SR8-Plus 2 Phase Step Motor Drive
2 Phase Step Motor Drive User Manual Rev. 1.1 AMP & MOONS Automation Contents 1 Introduction... 3 1.1 Overview...3 1.2 Features...3 1.3 Block diagram...4 2 Mounting the Drive... 4 3 Connections... 5 3.1
Instruction Manual. Selectable Microstep 5-ph Stepping Motor Driver RD-053MS RORZE CORPORATION
Instruction Manual Selectable Microstep 5ph Stepping Motor Driver RD053MS RORZE CORPORATION Be sure to read the following precautions for your safety. This section describes safety precautions to avoid
TOWA SEIDEN INDUSTRIAL CO., LTD.
INSTRUCTION MANUAL SOUNDING LEVEL METER MODEL: TLX-120AP/200AP Meanings of indications for safety used in this Instruction Manual are as follows. WARNING: Indicates that improper handling assumes the risk
Instruction Manual. Digital Panel Meter Model 3126 CAUTION. Code Type of T/C Measuring Range Display Range Accuracy
Instruction Manual Digital Panel Meter Model 3126 I-01861 1. Preface Thank you for purchasing our digital panel meter 3126 series. Before use, read this manual carefully and thoroughly, and keep this manual
Mclennan Servo Supplies Ltd. Bipolar Stepper Motor Translator User Handbook PM546
Mclennan Servo Supplies Ltd. Bipolar Stepper Motor Translator User Handbook PM546 Mclennan Servo Supplies Ltd. Telephone: 01276 26146 Yorktown Industrial Estate FAX: 01276 23452 22 Doman Road Camberley
10 AMP POWER RELAY. Breakdown voltage* 2. Operate time* 3 (at nominal voltage) Shock resistance. Vibration resistance. Unit weight
VDE 2c, 3c AMP POWER RELAY RELAYS 2. 1.72 FEATURES Interchangeable with existing models Long life and high reliability High contact capacity up to A 20 Available with plug-in/solder and quick-connect terminals
SLIDING DOOR OPERATOR INSTRUCTION MANUAL
SLIDING DOOR OPERATOR INSTRUCTION MANUAL (MODEL NO. 1071.101 & 1071.102) Please carefully keep this manual for good maintenance. Caution Be sure the door opener is far away from moisture, vibration, and
DC power supply connect to VF-AS1/PS1 Optional initial charger MCR-2550 Instruction manual
DC power supply connect to VF-AS1/PS1 Optional initial charger Instruction manual NOTE 1. Make sure that this instruction manual is delivered to the end user of the optional initial charger. 2. Read this
Changzhou RATTM Motor Co.,Ltd. DD8727T5V1 stepper motor driver product manual
Changzhou RATTM Motor Co.,Ltd KTS MALL Co.,Ltd DD8727T5V1 stepper motor driver product manual Changzhou RATTM Motor Co.,Ltd Email:sale1@rattmmotor.com Email:sale2@rattmmotor.com MSN:ali900111342 Skype:tonyswj119;
Analog Input Terminal
Analog Input Terminal I/O Interface Converts Analog Input Data into Binary Data Four inputs available. High resolution of 1/6000. Conversion is possible within a range of 5% to 105% FS. High conversion
DRV-1. Step Motor Drive. User Manual Mentor Avenue Cincinnati, Ohio Tel (513)
DRV-1 Step Motor Drive User Manual 1776 Mentor Avenue Cincinnati, Ohio 45212 Tel (513) 318-4600 www.resolutionair.com 2 Contents 1 Introduction... 3 1.1 Overview... 3 1.2 Features... 3 1.3 Block Diagram...
G203V / G213V MANUAL STEP MOTOR DRIVE
G203V / G213V MANUAL STEP MOTOR DRIVE PRODUCT DIMENSIONS PHYSICAL AND ELECTRICAL RATINGS Minimum Maximum Units Supply Voltage 18 80 VDC Motor Current 0 7 A Power Dissipation 1 13 W Short Circuit Trip 10
Auxiliary Relay (7PJ11) and Trip Relay (7PJ12)
s www.siemens.com/energy Auxiliary Relay (7PJ) and Trip Relay (7PJ2) Better protection and more efficiency for your power system Answers for infrastructure and cities. Auxiliary Relay and Trip Relay Catalogue
KNC-SRV-FD123-CA-000 Series Servo Driver
FEATURES DESCRIPTION Input Voltage Range From DC24VDC to 70VDC Rated Current is (RMS) 10A 50-200 Watt Power Range Position, Speed, and Torque Control RS232 and CAN BUS Natural Air Cooling MODBUS and CANopen
KNC-SRV-FD123-EA-000 Series Servo Driver
FEATURES DESCRIPTION Input Voltage Range From DC24VDC to 70VDC Rated Current is (RMS) 10A 50-200 Watt Power Range Position, Speed, and Torque Control RS232 and Natural Air Cooling MODBUS and CANopen Standard
G213V STEP MOTOR DRIVE REV 7: March 25, 2011
Thank you for purchasing the G213V drive. The G213V is part of Geckodrive s new generation of CPLD-based microstep drives. It has short-circuit protection for the motor outputs, over-voltage and under-voltage
LED Driver Linear / area dimming industry. Driver LC 150W mA IND sl EXC EXCITE series
Driver LC 150W 200 1050mA IND sl EXC EXCITE series Product description Constant current built-in Driver for LED, particularly suitable for industrial applications in tough environments such as cold warehouses
EPS/ELA-Series User Manual EPS/ELA 250W
EPS/ELA-Series User Manual EPS/ELA 250W EPS Stromversorgung GmbH Tel: +49 (0)821 570451 0 Index 3 Page: 1 Table of contents: Page 1. Features of ELA-Series... 3 1.1 Basic Functions... 3 1.2 Options...
Rated load current (resistive load) SRP. Min. 0.9 (max. 25 of difference between voltage phase and current phase)
SRPH1 Series Single Phase, Analog Input Type SSR Features Power control/ Cycle control/phase control (fixed cycle/ variable cycle) are available with 4-mA analog input Superior dielectric strength : 4,000VAC
Names and Functions of Driver Parts
List of Motor Connection and Extended Accessories Installation Product Line Dimensions and Operation Functions Connection and Operation Names and Functions of Parts 5 Power Supply Input/ Regeneration Unit
Electronic Ballast EVG 2000-T
Electronic Ballast EVG 2000-T Operating Manual Table of contents 1 Description 1.1 Advantages of this ballast... 3 1.2 Functional principle... 3 1.3 Energization... 4 1.4 Visualization... 5 1.5 Indications
STR3. Step Motor Drive. User Manual
STR3 Step Motor Drive User Manual Contents 1 Introduction... 3 1.1 Overview... 3 1.2 Features... 3 1.3 Block Diagram... 4 1.4 Safety Instructions... 5 2 Getting Started... 6 2.1 Mounting Hardware... 6
FLÄKTGROUP PM-MOTOR WITH INTEGRATED FC 106 FREQUENCY CONVERTER
FLÄKTGROUP PM-MOTOR WITH INTEGRATED FC 106 FREQUENCY CONVERTER INSTALLATION AND MAINTENANCE INSTRUCTIONS Risk of electric shock: Motor terminals may still be live if the impeller is rotating, even when
PRO POWER 2 0 A L I T H I U M B AT T E RY C H A R G E R M O D E L : P P - L B C V E R S I O N : V 1. 0
PRO POWER 2 0 A L I T H I U M B AT T E RY C H AR G E R M O D E L : P P - L B C - 1 2 2 0 V E R S I O N : V 1. 0 Contents 1. Revised History... 1 2. Warning... 1 3. Notes... 1 4. Product Number System...
www. ElectricalPartManuals. com Instruction Bulletin ALTIVAR FLEX58 TRX Adjustable Speed Chassis Drive Controllers Installation Guide
Instruction Bulletin ALTIVAR FLEX58 TRX Adjustable Speed Chassis Drive Controllers Installation Guide Retain for future use. 30072-450-47A July 2002 Raleigh, NC, USA HAZARDOUS VOLTAGE Read and understand
Instruction Manual. Selectable Microstep 2-ph Stepping Motor Driver RD-026MSA RORZE CORPORATION
Instruction Manual Selectable Microstep 2ph Stepping Motor Driver RD026MSA RORZE CORPORATION Be sure to read the following precautions for your safety. This section describes safety precautions to avoid
J1000. Compact Inverter Series.
J1000 Compact Inverter Series www.yaskawa.eu.com Focus on Application Customer orientation and application focus two attributes of machine equipment YASKAWA offers with its J1000 compact inverter drive
DJI E2000 Standard Tuned Propulsion System
DJI E2000 Standard Tuned Propulsion System User Manual V1.0 2016.02 Disclaimer Thank you for purchasing the E2000 Standard Tuned Propulsion System (hereinafter referred to as product ). Read this disclaimer
USER MANUAL MPS 1-5KW SERIES
USER MANUAL MPS 1-5KW SERIES Low Series Frequency Solar and Wind Power Charging Inverter CONTENTS 1 WWW.NEXTGENNRG.COM 1. Introduction... 3 2. Profile Structure 4 2.1. Working Principle 4 2.2.Product Features..5
Input voltage Power rating Output voltage Output current With Front mounting Bracket. With DIN-rail mounting Bracket 400/480 VAC
Three-phase Input Switch Mode S8PE DIN-rail mounting, 3-phase input Switch mode Supply with a range of 5A to 40A output current 3 phase 400/480 or 200/230 VAC input 5, 10, 20 and 40A; 24 VDC output Higher
PSU-S-12V/L-3A/9/FTA/PTC-TR-MC AWZ v.1.0
PSU-S-12V/L-3A/9/FTA/PTC-TR-MC AWZ 09123 v.1.0 Linear, stabilized power supply unit. EN Edition: 1 from the 30 th January 2011 Supercedes edition: Features of the power supply unit: 3 groups (A, B, C)
MLA Bipolar Microstep Driver. User s Guide. 910 East Orangefair Lane, Anaheim, CA
MLA05101 Bipolar Microstep Driver User s Guide A N A H E I M A U T O M A T I O N 910 East Orangefair Lane, Anaheim, CA 92801 e-mail: info@anaheimautomation.com (714) 992-6990 fax: (714) 992-0471 website:
LED Driver Linear / area dimming
Driver LC W 0 1050mA 50V IOTr lp PRE UNV PREMIUM series SELV (US applications) Product description Constant current LED Driver Dimming range 1 100 % Adjustable output current between 0 and 1,050 ma via
TR514H-D DC 5 Phase Micro Stepping Motor Driver User's Manual
TR14H-D-TS-V01E TR14H-D DC Phase Micro Stepping Motor Driver User's Manual Selection for 1~20 micro divisions Switch for two kinds of division externally Small volume, Simple controlling Reverse power
ST SERIES SERVO MOTOR
ST SERIES SERVO MOTOR BEIJING KND CNC TECHNIQUE CO.,LTD. 01.2012 CONTENTS NOTE 1 PROHIBITED 1 SOCKET FIG. 1 CAUTION 1 GENERAL 2 CHARACTERISTICS 2 SUPERIORITY 2 MODEL DESCRIPTION 3 WIRING 4 1. Power connector
Flying Electron Inc. Bipolar Stepper Motor Driver Datasheet
Bipolar Stepper Motor Driver Datasheet Part Number: FE_STEPPER_BP rev. d Notice: To the best of our knowledge the information contained in this datasheet is accurate and is represented in good faith, however,
PKS-FD Servo System
PKS-FD123-01 Servo System FEATURES 24-70VDC of 0.32 Nm Power Ratings up to 100 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6500 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available Position,
Operator Manual for 2(3)-Phase Stepper Motor Drive. smd x85
Operator Manual for 2(3)-Phase Stepper Motor Drive smd x85 Heatsink optional Revision: 47/2010 subject to change without prior notice BAUR Antriebe und Regelungen 1 www.baur-motion-control.de Product features
TF037C MICRO BLOWERS FEATURES STANDARD SPECIFICATIONS
FEATURES Aerodynamic bearings Compact / Light weight High static pressures Low vibration Long life due to aerodynamic bearings without heat dependence Two type available with or without mounting bracket
POLARISED, MONOSTABLE SAFETY RELAY with (mechanical linked) forced contacts operation
(SF3 pending) (SF3 pending) (SF3 pending) POLARISED, MONOSTABLE SAFETY RELAY with (mechanical linked) forced contacts operation SF-RELAYS π.098±.0.098±.0.098±.0 5.0.984 6.5±0.3.650±.0 33±0.3.99±.0 6.5±0.3.650±.0
PSU-S-12V/L-1A/5/FTA/PTC-TR-MC AWZ v.1.0
PSU-S-12V/L-1A/5/FTA/PTC-TR-MC AWZ 05121 v.1.0 Linear, stabilized power supply unit. Edition: 1 from the 2 nd February 2011 Supercedes edition: Features of the power supply unit: five outputs protected
(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
SR8. 2 Phase Step Motor Drive. User Manual Rev AMP & MOONS Automation
SR8 2 Phase Step Motor Drive User Manual Rev. 1.1 AMP & MOONS Automation Contents 1 Introduction...3 1.1 Overview...3 1.2 Features...3 1.3 Block diagram...4 2 Mounting the Drive...4 3 Connections...5 3.1
Analog input module. Brief description. Page 1/8. Data Sheet
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 e-mail: mail@jumo.net Internet: www.jumo.net
SA1W: Water Detection Sensors SA1W-FN1 SA1W-FN2 SA1W-FP1 SA1W-FP2
The SA1W is the fastest, most reliable liquid detection sensor on the market. Using a laser beam tuned to the resonant frequency of an H 2 O molecule, the SA1W is able to detect any liquid containing water
KNC-PKS-FD S-AAK-DKH
KNC-PKS-FD123-02 - Servo System FEATURES 24-70VDC of 90 oz-in Power Ratings up to 200 Watts 2,500 PPR Incremental Encoder Maximum Speed of 6000 RPM IP65 for Body, IP54 Shaft Seal Brake Option Available
SA1W: Water Detection Sensors
Courtesy of Steven Engineering, Inc. 230 Ryan Way, South San Francisco, CA, 94080-6370 ain Office: (650) 588-9200 Outside Local Area: (800) 258-9200 www.steveneng.com The SA1W is the fastest, most reliable
GS2 Series - Introduction
GS2 Series - Introduction GS2 Series Drives Rating Hp.25.5 1 2 3 5 7.5 10 kw 0.2 0.4 0.75 1.5 2.2 3.7 5.5 7.5 Single-Phase 115 Volt Class Single/Three-Phase 230 Volt Class Three-Phase 230 Volt Class Three-Phase
USER'S MANUAL MODEL DPD60001 MICROSTEP DRIVER PACK
COPYRIGHT Copyright 1997 by Anaheim Automation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language,
4 AXIS MICRO STEPPER MOTOR DRIVER DATASHEET DIP SW CONFIG. TABLE OFF OFF = FULL STEP ON OFF = 1/2 STEP
4 AXIS MICRO DRIVER DATASHEET CONFIG. TABLE OFF OFF = FULL STEP ON OFF = 1/2 STEP A A B B A A B B OFF ON = 1/4 STEP A A B B A A B B ON ON = 1/8 STEP FUSE MAX. 2.5 AMP FUSE MAX. 2.5 AMP FUSE MAX. 2.5 AMP
Flowmeter Ultrasonic Flow Metering / Dosing Device. Operating Manual
Flowmeter Ultrasonic Flow Metering / Dosing Device Operating Manual Read the user's manual carefully before starting to use the unit or software. Producer reserves the right to implement changes without
RVS-AX Instruction Manual
RVS-AX Analog Soft Starter 8-170A, 220-600V Instruction Manual Ver. 10/11/2009 2 Table of Content RVS-AX Instruction Manual 1. TABLE OF CONTENT 1. Table of Content...2 2. Safety & Warnings...3 2.1 Safety...3
Insulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit
SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,
Inductive Proximity Sensor
ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-43797575 Fax : 011-43797574 E-mail : sales@ashalain.com Inductive Proximity Sensor E2Q3 Square
Sintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore Tel: Fax:
Sintec Optronics Technology Pte Ltd 10 Bukit Batok Crescent #07-02 The Spire Singapore 658079 Tel: +65 63167112 Fax: +65 63167113 CW Arc Lamp Drivers The STCW series laser power supplies are made for CW
Table 2 Models BST12M-0.7S03PDM BST12M-0.7S06PDM BST12M-0.7S10PDM Conditions Input voltage range
Information The BSTM series is a small, thin, highly efficient and low noise non-isolated type step down DC-DC converter with input that has been developed for distributed feeding. Output voltage is adjustable
Please read Safety Considerations in operation manual before using. [Ai-M-42 Series] [Ai-M-56 Series] [Ai-M-60 Series] 67.5mm mm. 73.
i- Series 2-Phase Closed-Loop Stepper otor Features inimal heat generating, high torque motor (control voltage 55V) Higher cost-efficiency compared to conventional servo motors vailable in motor frame
SR3-mini. Step Motor Drive User Manual. AMP & MOONS Automation
SR3-mini Step Motor Drive User Manual AMP & MOONS Automation Contents 1 Introduction... 3 1.1 Overview...3 1.2 Features...3 1.3 Block Diagram...4 1.4 Safety Instructions...5 2 Getting Started... 6 2.1