VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
|
|
- Lorraine Hawkins
- 5 years ago
- Views:
Transcription
1 MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to 92% I/O Isolation 15 VDC Operating Temp. Range - to + No Min. Requirement Overload/Voltage/Temp. and Short Circuit Protection Remote On/Off Control, Output Voltage Trim Shielded Metal Case with Insulated Baseplate UL/cUL/IEC/EN 95-1 Safety Approval PRODUCT OVERVIEW The MINMAX MKW series is a new generation of high performance dc-dc converter modules setting a new standard concerning power density. The product offers fully W in an encapsulated, shielded metal package with dimensions of just 2."x1."x.4". All models provide wide 2:1 input voltage range and precisely regulated output voltages. Advanced circuit topology provides a very high efficiency up to 92% which allows an operating temperature range of - C to + C. Further features include remote On/Off, trimmable output voltage, under-voltage shutdown as well as overload and over-temperature protection. Typical applications for these converters are battery operated equipment, instrumentation,distributed power architectures in communication and industrial electronics and many other space critical applications. Model Selection Guide Model Number Input Voltage (Range) Output Voltage Output Current Input Current Reflected Ripple Current Over Voltage Max. capacitive VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW-12S MKW-12S MKW-12S MKW-12S (9 ~ 18) MKW-12S MKW-12D12 ±12 ±167 ± ±15 1# 88 MKW-12D15 ±15 ±133 ± ±18 75# 88 MKW-24S MKW-24S MKW-24S MKW-24S (18 ~ 36) MKW-24S MKW-24D12 ±12 ±167 ± ±15 1# 89 MKW-24D15 ±15 ±133 ± ±18 75# 89 MKW-48S MKW-48S MKW-48S MKW-48S (36 ~ 75) MKW-48S MKW-48D12 ±12 ±167 ± ±15 1# 89 MKW-48D15 ±15 ±133 ± ±18 75# 89 # For each output Efficiency (typ.) 15/1/23 REV:19 Page 1 of 1 Tel:
2 MKW SERIES DC/DC CONVERTER W, Highest Power Density Input Specifications Parameter Model Min. Typ. Max. Unit Input Models Input Surge Voltage (1 sec. max.) Input Models Input Models Start-Up Threshold Voltage Under Voltage Shutdown Input Polarity Protection Input Models Input Models Input Models Input Models Input Models Input Models Power Up ms Start Up Time Nominal Vin and Constant Resistive Remote On/Off ms Input Filter All Models Internal LC Type Short Circuit Current --- (Hiccup Mode 1.5 Hz typ, Output Model:.3 Hz typ.) Output Specifications Parameter Conditions Min. Typ. Max. Unit Output Voltage Setting Accuracy ±1. %Vnom. Output Voltage Balance Dual Output, Balanced s ±2. % Line Regulation Vin=Min. to ±.5 % Regulation Min. to Full Single Output ±.5 % Dual Output ±1. % Cross Regulation (Dual Output) Asymmetrical 25%/% Full ±5. % Minimum No Minimum Requirement for Single Output Models, for dual Output Models see Table 3.3V & 5V Output Models mv P-P Ripple & Noise - MHz Bandwidth None VDC, 15V & Models mv P-P Dual Output Models mv P-P Transient Recovery Time μsec 25% Step Change Transient Response Deviation --- ±3 ±5 % Temperature Coefficient ±.2 %/ Over Current Protection Current Limitation at 15% typ. of Iout max., Hiccup Short Circuit Protection Hiccup Automatic Recovery Over Voltage Protection For Shutdown Voltage see Model Selection Guide General Specifications Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage Seconds VDC I/O Isolation Resistance 5 VDC MΩ I/O Isolation Capacitance KHz, 1V pf Switching Frequency o Models KHz Other Models KHz MTBF(calculated) MIL-HDBK-217F@25, Ground Benign 328, Hours Safety Approvals UL/cUL 95-1 recognition (CSA certificate), IEC/EN 95-1(CB-report) Remote On/Off Control Parameter Conditions Min. Typ. Max. Unit On 3.5V ~ or Open Circuit Off V ~ 1.2V or Short Circuit Control Input Current (on) Vctrl = 5.V ma Control Input Current (off) Vctrl = V ma Control Common Referenced to Negative Input Standby Input Current Nominal Vin ma Tel: /1/23 REV:19 Page 2 of 1
3 MKW SERIES DC/DC CONVERTER W, Highest Power Density Output Voltage Trim Parameter Conditions Min. Typ. Max. Unit Trim Up / Down Range(9) % of nominal output voltage (o Models) + / % of nominal output voltage (Other Models) ± % Environmental Specifications Parameter Model Min. Operating Temperature Range (1) Nominal Vin, % Inom. (for Power Derating see relative Derating Curves) MKW-XXS33 MKW-XXS5 MKW-XXS12 MKW-XXS15 MKW-XXS24 - Max. without Heatsink with Heatsink MKW-XXDXX 52 without Heatsink /W with Heatsink /W LFM without Heatsink /W Thermal Impedance LFM with Heatsink /W LFM without Heatsink /W LFM with Heatsink /W LFM without Heatsink /W LFM with Heatsink /W Case Temperature Thermal Protection Shutdown Temperature 11 typ. Storage Temperature Range Humidity (non condensing) % rel. H Cooling Free-Air convection RFI Six-Sided Shielded, Metal Case Lead Temperature (1.5mm from case for 1Sec.) EMC Specifications Parameter Standards & Level Performance EMI Conduction EN5522, FCC part 15 Class A (See Page 9) EN5524 ESD EN-4-2 air ± 8kV, Contact ± 6kV B EMS Radiated immunity EN-4-3 1V/m A Fast transient (8) EN-4-4 ±2kV A Surge (8) EN-4-5 ±1kV B Conducted immunity EN-4-6 1Vrms A Unit Tel: /1/23 REV:19 Page 3 of 1
4 MKW SERIES DC/DC CONVERTER W, Highest Power Density Power Derating Curve LFM LFM LFM LFM LFM LFM LFM LFM ~ - 11 Ambient Temperature C ~ - 11 Ambient Temperature C MKW-XXS33 Derating Curve without Heatsink MKW-XXS33 Derating Curve with Heatsink LFM LFM LFM LFM LFM LFM LFM LFM ~ - 11 Ambient Temperature C ~ - 11 Ambient Temperature ] MKW-XXS5, MKW-XXS12, MKW-XXS15,MKW-XXS24 Derating Curve without Heatsink MKW-XXS5, MKW-XXS12, MKW-XXS15, MKW-XXS24 Derating Curve with Heatsink LFM LFM LFM LFM LFM LFM LFM LFM ~ - 11 Ambient Temperature C ~ - 11 Ambient Temperature ] MKW-XXDXX Derating Curve without Heatsink MKW-XXDXX Derating Curve with Heatsink Tel: /1/23 REV:19 Page 4 of 1
5 MKW SERIES DC/DC CONVERTER W, Highest Power Density Efficiency MKW-12S33 Efficiency vs Current MKW-12S5 Efficiency vs Current MKW-12S12 Efficiency vs Current MKW-12S15 Efficiency vs Current MKW-12S24 Efficiency vs Current MKW-12D12 Efficiency vs Current MKW-12D15 Efficiency vs Current MKW-24S33 Efficiency vs Current Tel: /1/23 REV:19 Page 5 of 1
6 MKW SERIES DC/DC CONVERTER W, Highest Power Density Efficiency MKW-24S5 Efficiency vs Current MKW-24S12 Efficiency vs Current MKW-24S15 Efficiency vs Current MKW-24S24 Efficiency vs Current MKW-24D12 Efficiency vs Current MKW-24D15 Efficiency vs Current MKW-48S33 Efficiency vs Current MKW-48S5 Efficiency vs Current Tel: /1/23 REV:19 Page 6 of 1
7 MKW SERIES DC/DC CONVERTER W, Highest Power Density Efficiency MKW-48S12 Efficiency vs Current MKW-48S15 Efficiency vs Current MKW-48S24 Efficiency vs Current MKW-48D12 Efficiency vs Current MKW-48D15 Efficiency vs Current Notes 1 Specifications typical at Ta=+25, resistive load, nominal input voltage and rated output current unless otherwise noted. 2 Transient recovery time is measured to within 1% error band for a step change in output load of 75% to %. 3 Ripple & Noise measurement with a 1μF M/C and a 1μF T/C. 4 We recommend to protect the converter by a slow blow fuse in the input supply line. 5 Other input and output voltage may be available, please contact factory. 6 To order the converter with heatsink, please add a suffix HS (e.g.mkw-12s5-hs) to order code. 7 To order the converter without Remote On/Off function, please add a suffix -N (e.g.mkw-12s5-n) to order code. 8 To meet EN-4-4 & EN-4-5 by adding a capacitor across the input pins.suggested capacitor: CHEMI-CON KXG 33μF/V. 9 Do not exceed maximum power specification when adjusting output voltage. 1 That natural convection is about LFM but is not equal to still air ( LFM). 11 Specifications are subject to change without notice. Tel: /1/23 REV:19 Page 7 of 1
8 31.1 [1.22] 3.6 [.14] [1.] 5.8 [2.] MKW SERIES DC/DC CONVERTER W, Highest Power Density Package Specifications Mechanical Dimensions [.] [.] [.] [.4] Pin Connections Pin Single Output Dual Output 1 +Vin +Vin 2 3 Remote On/Off Remote On/Off 4 +Vout +Vout 5 -Vout Common 6 Trim -Vout Bottom View T: 11.mm(.43 inch) for Output Models T: 1.2mm(. inch) for Other Output Models 1.85 [.7] [.] 1.16 [.] 25.4 [1.] 2.54 [.1] 5.5 [.22] T All dimensions in mm (inches) Tolerance: X.X±.25 (X.XX±.1) X.XX±.13 ( X.XXX±.5) Pin diameter 1. ±.5 (.4±.2) Physical Characteristics Case Size ( Output) : 5.8x25.4x11.mm (2.x1.x.43 inches) Case Size (Other Output) : 5.8x25.4x1.2mm (2.x1.x. inches) Case Material : Aluminium Alloy, Black Anodized Coating Base Material : FR4 PCB (flammability to UL 94V- rated) Pin Material : Copper Alloy with Gold Plate Over Nickel Subplate Weight : 3g Heatsink (Option HS) Physical Characteristics Heatsink Material : Aluminum Finish : Black Anodized Coating Weight : 9g T: 18.mm(.71 inch) for Output Models T: 17.2mm(.68 inch) for Other Output Models T 31. [1.22]Max Heat-sink Thermal pad Clamp The advantages of adding a heatsink are: 1. To improve heat dissipation and increase the stability and reliability of the DC/DC converters at high operating temperatures. 2. To increase operating temperature of the DC/DC converter, please refer to Derating Curve. Tel: /1/23 REV:19 Page 8 of 1
9 MKW SERIES DC/DC CONVERTER W, Highest Power Density EMI Filter meets Conducted EMI EN5522 class A; FCC part 15 level A Part No. MKW-12SXX MKW-24SXX MKW-48SXX MKW-12DXX MKW-24DXX MKW-48DXX C1 1μF/25V 1812 MLCC 4.7μF/5V 1812 MLCC 2.2μF/V 1812 MLCC 1μF/25V 1812 MLCC 4.7μF/5V 1812 MLCC 2.2μF/V 1812 MLCC C2 pf/2kv 18 MLCC pf/2kv 18 MLCC pf/2kv 18 MLCC pf/2kv 18 MLCC pf/2kv 18 MLCC pf/2kv 18 MLCC C3 pf/2kv 18 MLCC pf/2kv 18 MLCC pf/2kv 18 MLCC None None None C4 None None None pf/2kv 18 MLCC pf/2kv 18 MLCC pf/2kv 18 MLCC External Output Trimming Output can be externally trimmed by using the method shown below MKW-XXS33 Trim Table Trim down % Vout= Vox.99 Vox.98 Vox.97 Vox.96 Vox.95 Vox.94 Vox.93 Vox.92 Vox.91 Vox.9 Volts Rd= KOhms Trim up % Vout= Vox1.1 Vox1.2 Vox1.3 Vox1.4 Vox1.5 Vox1.6 Vox1.7 Vox1.8 Vox1.9 Vox1.1 Volts Ru= KOhms MKW-XXS5 Trim Table Trim down % Vout= Vox.99 Vox.98 Vox.97 Vox.96 Vox.95 Vox.94 Vox.93 Vox.92 Vox.91 Vox.9 Volts Rd= KOhms Trim up % Vout= Vox1.1 Vox1.2 Vox1.3 Vox1.4 Vox1.5 Vox1.6 Vox1.7 Vox1.8 Vox1.9 Vox1.1 Volts Ru= KOhms MKW-XXS12 Trim Table Trim down % Vout= Vox.99 Vox.98 Vox.97 Vox.96 Vox.95 Vox.94 Vox.93 Vox.92 Vox.91 Vox.9 Volts Rd= KOhms Trim up % Vout= Vox1.1 Vox1.2 Vox1.3 Vox1.4 Vox1.5 Vox1.6 Vox1.7 Vox1.8 Vox1.9 Vox1.1 Volts Ru= KOhms MKW-XXS15 Trim Table Trim down % Vout= Vox.99 Vox.98 Vox.97 Vox.96 Vox.95 Vox.94 Vox.93 Vox.92 Vox.91 Vox.9 Volts Rd= KOhms Trim up % Vout= Vox1.1 Vox1.2 Vox1.3 Vox1.4 Vox1.5 Vox1.6 Vox1.7 Vox1.8 Vox1.9 Vox1.1 Volts Ru= KOhms MKW-XXS24 Trim Table Trim down % Vout= Vox.99 Vox.98 Vox.97 Vox.96 Vox.95 Vox.94 Vox.93 Vox.92 Vox.91 Vox.9 Volts Rd= KOhms Trim up % Vout= Vox1.2 Vox1.4 Vox1.6 Vox1.8 Vox1.1 Vox1.12 Vox1.14 Vox1.16 Vox1.18 Vox1.2 Volts Ru= KOhms Tel: /1/23 REV:19 Page 9 of 1
10 MKW SERIES DC/DC CONVERTER W, Highest Power Density Test Setup Input Reflected-Ripple Current Test Setup Input reflected-ripple current is measured with a inductor Lin (4.7μH) and Cin (2μF, ESR < 1.Ω at KHz) to simulate source impedance. Capacitor Cin, offsets possible battery impedance. Current ripple is measured at the input terminals of the module, measurement bandwidth is -5 KHz. To Oscilloscope +Vin +Out + + Lin Battery Cin Current Probe Peak-to-Peak Output Noise Measurement Test Use a 1μF ceramic capacitor and a 1μF tantalum capacitor. Scope measurement should be made by using a BNC socket, measurement bandwidth is - MHz. Position the load between 5 mm and 75 mm from the DC/DC. +Vin Single Output +Out Copper Strip Copper Strip Scope Resistive +Vin Dual Output +Out Com. Copper Strip Copper Strip Copper Strip Scope Scope Resistive Technical Notes Remote On/Off Positive logic remote on/off turns the module on during a logic high voltage on the remote on/off pin, and off during a logic low. To turn the power module on and off, the user must supply a switch to control the voltage between the on/off terminal and the terminal. The switch can be an open collector or equivalent. A logic low is V to 1.2V. A logic high is 3.5V to. The maximum sink current at the on/off terminal (Pin 3) during a logic low is -μa. Overcurrent Protection To provide hiccup mode protection in a fault (output overload) condition, the unit is equipped with internal current limiting circuitry and can endure overload for an unlimited duration. Overvoltage Protection The output overvoltage clamp consists of control circuitry, which is independent of the primary regulation loop, that monitors the voltage on the output terminals. The control loop of the clamp has a higher voltage set point than the primary loop. This provides a redundant voltage control that reduces the risk of output overvoltage. The OVP level can be found in the output data. Input Source Impedance The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series Resistance (ESR < 1. Ω at KHz) capacitor of a 33μF for the input devices and a 1μF for the and devices. + DC Power Source - + Cin +Vin +Out Output Ripple Reduction A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. recommended to use 4.7μF capacitors at the output. To reduce output ripple, it is + DC Power Source - +Vin Single Output +Out + DC Power Source - +Vin Dual Output +Out Com. Maximum Capacitive The MKW series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode during start-up, affecting the ramp-up and the startup time. The maximum capacitance can be found in the data sheet. Thermal Considerations Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module and board spacing. To avoid exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 15. The derating curves are determined from measurements obtained in a test setup. Position of air velocity probe and thermocouple 15mm /.6in 5mm / 2in Air Flow DUT Minmax Technology Co., Ltd. 18, Sin Sin Road, An-Ping Industrial District, Tainan 72, Taiwan Tel: Fax: sales@minmax.com.tw 15/1/23 REV:19 Page 1 of 1
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More information(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More informationOutput Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
More informationOutput Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
More informationEfficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
More information(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
More informationDH50 SERIES. DATASHEET Rev. A
DATASHEET DH50 SERIES 2:1 Wide Input Voltage Ranges Single Outputs, Efficiency up to 92% 2.0 x 1.0 x 0.4 Encapsulated Shielded Metal Package FEATURES RoHS & UL 94V-0 Compliant 50 Watts Output Power 2:1
More informationOutput Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
More information2W, Low Cost DIP, Dual Output DC/DC Converters
2W, Low Cost DIP, Dual Output DC/DC s Key Features Low Cost 500 Isolation MTBF > 0,000 Hours mv P-P Ripple and Noise Input 12 Output {15 Temperature Performance -25] to +71] Short Circuit Protection UL
More informationS24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
More informationPOWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
More informationHALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 100 WATT RAILWAY APPLICATIONS HWB100 SERIES
HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1 Wide Input Voltage Range
More informationHALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 150 WATT RAILWAY APPLICATIONS HWB150 SERIES
DATA DATA SHEET SHEET HALF-BRICK DC-DC CONVERTERS 4:1 ULTRA WIDE INPUT RANGE 15 WATT RAILWAY APPLICATIONS FEATURES No Minimum Load Required 225 Input to Output Basic Insulation Railway Applications 4:1
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More informationPG02S Series 2W DC/DC CONVERTER, SIP-Package
PG02S Series 2W DC/DC CONVERTER, SIP-Package FEATURES Efficiency up to 81% SIP Package with Industry Pinout Small Footprint: 21.8 x 9.3 mm (0.86 x 0.37 inch) Wide 2:1 Input Range Operating Temperature
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FED60-48 S 05 W - M3 N HC Series Name Input Output Output Input Operating Temp. Remote
More information4:1 Input Voltage Range 2.25kVDC Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required
Features Regulated Converters Description 4:1 Input Voltage Range 2.25kV Isolation UL Certified Efficiency up to 87% Ultraminiature Open Frame SMD No Minimum Load Required The series are SMD open frame
More informationHAE S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option Voltage Quantity Voltage Pin Options
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 - P HS Series Name Input Output Output Ctrl and Assembly Option
More informationDPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationHAE S 05 - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE HAE100-48 S 05 - P TH HS Series Name Input Output Output Ctrl and Through hole Assembly
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
More informationFeatures. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
More informationUL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
More informationHAE S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly Option Voltage Quantity Voltage Range Pin Options
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE DIP Type: HAE100-48 S 05 W - P HS Series Name Input Output Output Input Ctrl and Assembly
More informationHAE S 05 W - P TH HS PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE HAE100-48 S 05 W - P TH HS Series Name Input Output Output Input Ctrl and Through hole
More informationCHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS FWB(D)150 SERIES*
CHASSIS MOUNT DC-DC CONVERTERS 4:1 WIDE INPUT RANGE, 150 WATTS RAILWAY APPLICATIONS * FEATURES 4:1 Wide Input Range (9-36, 43-160Vdc) No Minimum Load Required High Efficiency: Up to 89% Built In EN55011
More informationRCD15W Series PART NUMBER STRUCTURE
DC/DC Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RCD15-48 S 05 W - M3 A HC Series Name Input Output Output Input Operating Temp.
More informationFeatures. Isolation PFM. Block Diagram
Features SMT Technology 2:1 Input Range Efficiency up to 85 I/O Isolation 00 Remote on/off Control Short Circuit Protection MTBF > 1,000,000 Hours RoHS Compliant MSL2 (Moisture Sensitivity Level) per IPC/JEDEC
More informationDPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
More informationApplication Note TES 1 Series
1W, Miniature SMD, Single & Dual Output DC/DC Converters Features SMD Package with Industry Standard Pinout Small Footprint: 11.0 x 13.7 mm (0.43 x 0.54 ) Single Output Models 11.0 x 16.3 mm (0.43 x 0.64
More informationDC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE SWB9 SERIES
DC-DC CONVERTERS 4:1 WIDE INPUT RANGE UP TO 9 WATTS SINGLE AND DUAL OUTPUT, SIP PACKAGE FEATURES 4:1 Ultra Wide Input Range Output Current up to 2000 ma Miniature SIP (Single-In-Line) Package, 0.86 0.36
More informationRP40- _FR/ Package (4) CTRL Logic (3)
Features Regulated Converters Description Wide 4:1 Input Voltage Range 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 1Vin Efficiency up to 92% Six-Sided Continuous Shield UL695-1 AM2 Certified,
More informationDPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
More informationRDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage Quantity Voltage Range temperature PART NUMBER STRUCTURE
Railway Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV PART NUMBER STRUCTURE RDL06-48 S 05 W - M3 Series Name Input Output Output Input Operating ambient Voltage
More informationNote1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
More informationPDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL09-48 S 05 M Series Name Input Output Output Case Voltage Quantity Voltage Option
More informationDPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
More informationDPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
More informationLANC245.1W12. DC/DC Converter VDC Input 5.1 VDC Output at 2.4A. Features:
DC/DC Converter 18-36 VDC Input 5.1 VDC Output at 2.4A Features: Applications: Distributed Power Architectures Communications Equipment Computer Equipment Work Stations UL TUV CB CE MARK RoHS Compliant
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE FDC10-48 S 05 W - M2 P HC Series Name Input Output Output Input Operating Temp. Remote
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection
Features Regulated Converters 2:1 Wide Voltage Range 1.6kV Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection Description The series / converters are certified
More informationS24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
More informationDC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS MTWA2 SERIES
DC-DC CONVERTERS 2:1 INPUT RANGE, UP TO 2 WATTS MEDICAL APPLICATIONS FEATURES 2:1 Wide Input Voltage Range: 4.5-12 Input, 9-18 and 18-36 and 36-75 5000Vac Input to Output 2MOPP Isolation Remote On/Off
More informationEfficiency Model dependant 86 ~ 88% Isolation. Isolation Cap. Switching Freq. Safety. Case Material Base Material Potting.
DC/DC Converter Si ngle Output: 150 Watts DIN Rail -Option STD-Panel Mount / HC Features 4:1 wide Input range: 9~36V,18~75V & 43~160VDC Single output, up to 12.5A / 150 watts Rail EN50155 compliance High
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 25VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationPDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE PDL03-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
More information150 WATT HEW SINGLE SERIES DC/DC CONVERTERS
Features Description The 4:1 Input Voltage 150 W single HEW Series of DC/DC converters provide precisely regulated dc outputs. The output voltage is fully isolated from the input, allowing the output to
More informationEfficiency(1) Max. Capacitive. Package(3) CTRL Logic(2) Single
4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to % No minimum load required EN5155 certified IEC/EN95-1 certified Features Regulated
More informationDC/DC Converter URF48_QB-75W(F/H)R3 Series
DC/DC Converter 75W, wide input voltage, isolated & regulated single output DC-DC converter FEATURES Ultra wide input voltage range (4:1) High efficiency up to 93% Isolation voltage: 2.25K VDC Input under-voltage
More informationNote1: Efficiency is tested by nominal Vin, full load and at 25 C. Package (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 1Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 93% No minimum load required EN5155, IEC/EN95-1 & UL95-1
More informationPackage (3) CTRL Logic (2)
Features Regulated Converter 4:1 wide input range 3kVAC reinforced insulation for 11Vin 2.25kVDC basic insulation for 24Vin & 48Vin Efficiency up to 91% No minimum load required UL695-1, EN5155 & IEC/EN695-1
More informationMPP10-48 S 05 W A - P T Series Name Input Output Output Input Pin Connection Remote On/Off Trim Voltage Quantity Voltage Range Option Options Option
Medical PV Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Railway PART NUMBER STRUCTURE MPP10-48 S 05 W A - P T Name Input Output Output Input Pin Connection Remote On/Off
More informationC B. Operating up to 5000m altitude 5 year product warranty Models
DC/DC Converter Wide 2:1 input voltage 6 W DC/DC converter in a compact DIP-24 plastic case I/O isolation 5000 VACrms rated for 250 VACrms working voltage Certification according to IEC/EN/ES 60601-1 3rd
More informationDC/DC Converter URF48_QB-200W(F/H)R3 Series
DC/DC Converter 200W, wide input voltage, isolated & regulated single output DC-DC converter FEATURES Ultra wide input voltage range (4:1) High efficiency up to 91% Isolation voltage: 2.25K VDC Input under-voltage
More informationEB Series Eighth - Brick Up to 100 Watt DC-DC Converter
FEATURES DOSA Standard Form, Fit & Function Industry standard 1/8th brick footprint 4:1 input voltage range: 9-36 or 18 75Vin ROHS II Directive 2011/65/EU Compliant No minimum load required -40 0 C to
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and EN-50121-3-2 Certified
More informationNote1: Typical values at nominal input voltage and full load. 39VDC. Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Baseplate Case Style 2250VDC Isolation Wide 4:1 Input Voltage Range EN-50155 and
More informationSDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage Range Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE SDS05-48 S 05 W H Series Name Input Output Output Input Isolation Voltage Quantity Voltage
More informationModel Number Output Voltage Output Amps Input Range Max. Iin FL Efficiency Max Output Power
Small 2.32 x 0.9 x 0.37 Size Constant Frequency High Typical Efficiency of 90% (12Vout) Low Output Noise 18 to 60VDC Input Voltage Range Output Over Voltage Protection Current Limit/Short Circuit Protection
More informationFEATURES. Input Voltage (VDC) 3.3
DC/DC Converter FEATURES 15W, wide input, isolated & regulated DC/DC converter CB Patent Protection Wide input voltage range (2:1) High efficiency up to 90% No-load power consumption as low as 0.12W Isolation
More informationSH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
More informationAPPLICATIONS: AVAILABLE OPTIONS
PRODUCT OVERVIEW The HB series offers up to 350 watts of output power in standard Half-Brick package. This series features high efficiency up to 92%, high power density and 1500 Volts of DC isolation.
More informationDC/DC Converter URA(B)_LD-15WR2 & URA(B)_LD-20WR2 Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated dual / single output DC/DC converter Patent Protection RoHS Wide range of input voltage (4:1) Efficiency up to 90% Isolation voltage
More informationDC/DC Converter URB1D_LMD-10WR3 Series
DC/DC Converter FEATURES 10W, ultra wide input isolated & regulated single output DC-DC converter Ultra wide input voltage range (4:1) High efficiency up to 85% Enhanced isolation, isolation voltage: 2250VDC
More informationUnit/Comments. %; Equal Output Loads %; Equal Output Loads Full Load
100 series Single, Dual, Triple Output DC/DC Converter DESCRIPTIONS FEATURES Synchronization 13.3W/In 3 Power Density Efficiency to 87% UL 190 Approved VDE / EN 90 Approved >700,000 Hours MTBF 6 sided
More informationSixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%
Features Regulated Converter Description Sixteenth brick format : input voltage range.kv basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 9% The RPAS is a low cost
More informationTRC ELECTRONICS, INC DC/DC Converter SIP Package 6W MEAN WELL SPBW06 & DPBW06 Series
/,, MODEL SELECTION TABLE INPUT ORDER NO. INPUT VOLTAGE (RANGE) NO LOAD INPUT CURRENT FULL LOAD VOLTAGE CURRENT EFFICIENCY (TYP.) CAPACITOR LOAD (MAX.) SPBW06F-03 310mA 3.3V 0 ~ 1500mA 81% 4700μF SPBW06F-05
More informationNotes: Note1: values at nominal input voltage and full load. 8.5VDC 5V 8V. Open, Efficiency vs. Input Voltage. Efficiency [%]
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Wide 4:1 Input Voltage Range EN-522 Class B The
More informationNorth America Asia-Pacific Europe, Middle East
Bel Power Solutions point-of-load converters are recommended for use with regulated bus converters in an Intermediate Bus Architecture (IBA). The YMS nonisolated dc-dc converters deliver up to A of output
More information1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections DC/DC Converter Description The is a switching regulator with a wide input voltage range,
More informationQHW050F1, QHW075F1, and QHW100F1 Power Modules: dc-dc Converters; 36 to 75 Vdc Input, 3.3 Vdc Output; 33 W to 66 W
QHWF1, QHW7F1, and QHW1F1 Power Modules: Data Sheet January 2 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress
More informationDC/DC Converter URB1D_LD-15W & URB1D_LD-20W Series
DC/DC Converter FEATURES 15W&20W,Ultra wide input isolated & regulated DC/DC converter Wide range of input voltage (4:1) Efficiency up to 89% Isolation voltage :1.5K VDC Operating temperature range: -40
More informationISOLATED DC-DC Converter EC2SB SERIES APPLICATION NOTE
ISOLATED DC-DC Converter EC2SB SERIES APPLICATION NOTE Approved By: Department Approved By Checked By Written By Enoch Danny/ Tim Joyce Research and Development Department Jacky Jack Benny Quality Assurance
More informationNot for New Design 10 WATT WD DUAL LOW INPUT SERIES DC/DC CONVERTERS. Features
Features Universal 9 to 36 Volt Input Range Up to 10 Watts of PCB Mounted Power Efficiencies to > 80% Optional On/Off Control Pin Fully isolated, Filtered Design Low Noise Outputs Very Low I/O Capacitance,
More information1000 WATT 24S12.84FXM DC/DC CONVERTER
Features 4:1 Input voltage range High power density Small size 2.5 x 4.7 x 0.52 Efficiency up to 95.4% Excellent thermal performance with metal case Over-Current and Short Circuit Protection Over-Temperature
More informationRS5/RD5-R10/RD10. RoHS. 1.0W Regulated Single & Dual Output
1.0W Regulated RS5/RD5-R10/RD10 8 Pin SIL/ 16Pin DIL Package Wide 2:1 Input Range 1000VDC Isolation Up to 3000VDC Isolation Continuous Short Circuit Protection Efficiency up to 77% Operating Temperature
More informationHBC DC-DC Series Data Sheet 300-Watt Half-Brick Converters
Applications Intermediate Bus architectures Telecommunications equipment LAN/WAN applications Data processing applications Features RoHS lead solder exemption compliant High efficiency up to 94% High power
More informationOSR03-24 S 05 A Series Name Input Output Output Assembly Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE OSR03-24 S 05 A Series Name Input Output Output Assembly Voltage Quantity Voltage Option
More informationSL Series Application Notes. SL Series - Application Notes. General Application Notes. Wire Gage & Distance to Load
Transportation Products SL Series - Application Notes General Application Notes vin 2 ft. 14 AWG The SL family of power converters, designed as military grade standalone power converters, can also be used
More informationDelphi Series V48SH, 1/16 th Brick 100W DC/DC Power Modules: 48V in, 1.8V, 30A out
Delphi Series V48SH, 1/16 th Brick 1W DC/DC Power Modules: 48V in, 1.8V, 3A out The Delphi Series V48SH, 1/16 th Brick, 48V input, single output, isolated DC/DC converter, is the latest offering from a
More informationDCMCW60 SERIES FEATURES
DATASHEET DCMCW SERIES 4:1 Ultra Wide Input Voltage Ranges - C to +95 C Operating Temperature Single Outputs, Standard APPLICATIONS Distributed Power Systems Measurement Equipment Telecom Wireless Networks
More informationLSS-T/10-W12. Adjustable Output 10 Amp SIP-mount DC/DC Converter. PRODUCT OVERVIEW FEATURES
www.murata-ps.com FEATURES Vertical SIP-mount small footprint package Output from 0.6 to 6 Volts up to 51 Watts Ultra-wide 4.5 to 13.8 Vdc input range Outstanding thermal performance and derating Extensive
More informationYM12S05 DC-DC Converter Data Sheet Vdc Input; Vdc 5A
The Products: Y-Series Applications Intermediate Bus Architectures Distributed Power Architectures Data communications Telecommunications Servers, workstations Benefits High efficiency no heat sink required
More informationSeries AM2F-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single output Model Input FEATURES: RoHS compliant Operating temperature -25 o C to + 85 o C 12 Pin SIP Package Input / Isolation 1, 3 or 5VDC
More informationFW250R1 and FW300R1 Power Modules: dc-dc Converters: 36 Vdc to 75 Vdc Input, 28 Vdc Output; 250 W to 300 W
Data Sheet FW25R1 and FW3R1 Power Modules: dc-dc Converters: Features The FW25R1 and FW3R1 Power Modules use advanced, surface-mount technology and deliver high-quality, compact, dc-dc conversion at an
More informationDEWS SERIES 25W-30W WIDE INPUT RANGE
DEWS SERIES 25W-30W WIDE INPUT RANGE FEATURES 25-30 WATTS OUTPUT POWER ULTRA COMPACT SIZE:1.0 x1.0 x0.52 INDUSTRY STANDARD PACKAGE 9V-18V,18V-36V,36V-75V WIDE INPUT RANGE 100% BURNED IN HIGH EFFICIENCY
More informationSeries AM2D-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com s Single output Input FEATURES: RoHS Compliant Low Ripple and Noise High up to 82% 7 Pin SIP Package Current (ma) Operating Temperature -40 o C to +85
More informationOUTPUT VOLTAGE 5V MAX.INPUT CURRENT 16.0A 12V 7.0A 12V 12V 24V 35.0A 28V 48V 12V 15V 24V 28V 23.0A 48V 12V 15V 24V 28V 48V 11.5A
210W to Single Output Full Brick DC/DC Converters STANDARD FULL BRICK PACKAGE POWER DENSITY UP TO 5.53W/CM 3 EFFICIENCIES FROM 86-91% ACTIVE LOAD SHARING WIDE INPUT VOLTAGE RANGE ACTIVE LOAD SHARING REMOTE
More informationHQA DC-DC Power Module Series
HQA DC-DC Power Module Series 9-4V Wide Input, 85W Output Quarter Brick The HQA Series of dc-dc converters offers a high performance quarter brick package with true usable power, a wide range input voltage
More informationSeries AM2S-Z 2 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Models Single Model Voltage (V) FEATURES: RoHSCompliant Operating Temperature - to +85 4 Pin SIP Package / Isolation and 3VDC Ultra MiniaturePackage
More informationDelphi Series V48SC, 1/16th Brick 120W DC/DC Power Modules: 48V in, 12V, 10A out
Delphi Series V48SC, 1/16th Brick 120W DC/DC Power Modules: 48V in, 12V, 10A out The Delphi Series V48SC, 1/16 th Brick, 48V input, single output, isolated DC/DC converters, are the latest offering from
More informationGB60S 60W Single Output General Purpose Series
Features 2 x 3 x 1.0 Package Operates to 80 C Ambient For 1U Applications 60W convection cooled Universal Input 90-264Vac Optional Power ON LED Approved to CSA/EN/IEC/UL60950-1, 2 nd Edition Efficiency
More informationNCS12 Series Isolated 12W 4:1 Input Single & Dual Output DC/DC Converters
NCS1 Series Isolated 1W :1 Input Single & Dual Output DC/DC Converters FEATURES UL 95 recognition pending :1 Wide range voltage input Operating temperature range - C to 5 C Typical load regulation from.5%
More information