XPi series. the intelligent pump. fixed displacement bent axis design. XPi - Presentation ADVANTAGES
|
|
- Roberta Lawrence
- 6 years ago
- Views:
Transcription
1 XPi - Presentation the intelligent pump fixed displacement bent axis design The compact size envelope of XPi pumps, together with their technology, means they can be installed in environments with little space available, and be used at relatively high rotating speeds. ADVANTAS Pump automatically sets to required direction of rotation Mounting and start-up, easier than ever! CHARACTRISTICS 7 pistons Innovative plate - barrel synchronisation use of materials with high mechanical resistance reinforced sealing 10 models : from 12 to 130 cc/rev 380 bar continuous working pressure 420 bar peak pressure max. speed from 1750 to 3150 rpm
2 Characteristics - XPi Pump reference Displac. Maximum Maximum intermittent peak continuous pressure pressure < 5 seconds Max speed (1) Max. torque absorbed at 380 bar (2) Weight with 2ʺ Overhang torque with 2ʺ (cc/rev) (bar) (bar) (rpm) (N.m) (kg) (kg) (N.m) (N.m) XPi XPi XPi XPi XPi XPi XPi XPi XPi XPi (1) At absolute pressure 1 bar, ISO V46 fluid at 25 C. (2) Maximum torque given with a mechanical efficiency at 95%. DUAL DIRCTION O ROTATION: this intelligent pump can operate in either direction of rotation. Clockwise (CW) Counter-clockwise (CCW) it the on required side, depending on the direction of rotation of the PTO, and the pump will set itself accordingly. Inlet Outlet When the PTO turns counter-clockwise, the pump has to turn clockwise. When the PTO turns clockwise, the pump has to turn counter-clockwise.
3 XPi - Dimensions Splined shaft: DIN ISO 14 - N (DIN 5462) ±0, A M12x1.75-6H Ø ± /8" C D Ø (4x) B VIW H Additionnal bore on the shaft on request ± 0.05 Ø 8,15 ± 0.05 Shaft bored through Pump reference A B C D H XPi /4" 54 XPi /4" 54 XPi /4" 54 XPi /4" 54 XPi /4" 54 XPi /4" 54 XPi /4" 54 XPi " 60 XPi " 60 XPi " 60
4 Performance - XPi Torque absorbed as a function of pump output pressure (with a mechanical efficiency considered at 95%) Torque (N.m) XPi 130 XPi 108 XPi 80 XPi 63 XPi 50 XPi 41 XPi 32 XPi 25 XPi 18 Cyl x P C = 62.8 x ŋ meca With: C = Torque in N.m Cyl = Displacement in cc/rev P = Differential pressure in bar ŋ meca = Mechanical efficiency XPi Pressure (bar) low as a function of rotating speed Q (l/min) XPi 130 XPi 108 XPi 80 XPi 63 XPi 50 XPi 41 XPi 32 XPi 25 XPi 18 XPi 12 With: Q = Cyl x N x ŋ vol 0 Q = low in l/min N = Speed in rpm ŋ vol = Volumetric efficiency Cyl = Displacement in cc/rev N (rpm) These graphs are the results of testwork done in HYDRO LDUC R&D laboratory, on a specific test bench with a mineral hydraulic fluid ISO V46 at 25 C (~ cst) - disregarding the volumetric efficiency. Volumetric efficiency % fficiency at 0 rpm Pressure (bar)
5 XPi - Accessories INLT ITTINS OR XPi PUMPS See recommendations of the hosing dimensions on page 42. or high speeds, please consult. All XPi pumps are supplied with their. Please specify required fitting from the choice below when ordering. 45 elbow fittings kit 90 elbow fittings kit x A x A Reference Ø hose Ø A /2" /4" " /2" Reference Ø hose Ø A /2" " /2" DLCTOR TO PROTCT SHAT SALS This deflector ensures the protection of the pump shaft seals. In particular, it protects the pump from projections of dirt from the road in cardan drive installations. Reference: D BY-PASS VALV OR XPi PUMPS or XPi pump applications where the pump is driven by a continuous running PTO (PTO which cannot be disengaged), this solution allows the continuous running of the pump: creating problems of fluid overheating; affecting pump service life; with no modifications necessary to the hydraulic circuit of the equipment. Drain By-pass fitted on the back of the XPi pump. LDUC references 24 Volts XPi 12 to XPi 63 BP XPi 80 to XPi 130 BP By-pass valve
6 Accessories - XPi How does it work? The by-pass valve is a 24 Volts solenoid valve. When not activated, it enables pump output to link up to pump inlet. When it is activated, the pump operates normally (output flow). M T Application circuit A drain line has to be installed between the By-Pass valve and the hydraulic tank of the vehicule to ensure sufficient oil circulation and a good cooling into the pump. In any case, the connection to the tank must be done below the oil level. XPi overhang torque with by-pass Pump reference Weight with inlet fitting 2" Overhang torque with inlet fitting 2" (kg) (kg) (N.m) (N.m) XPi XPi XPi XPi XPi XPi XPi XPi XPi XPi Dimensions with by-pass valve Pump reference A B C D H J XPi 12 / 18 / /4" XPi 32 / /4" XPi 50 / /4" XPi 80 / " XPi " C B A Drain 1/4'' (T) to be connected to the tank D H 118 J
XPi series. the intelligent pump. fixed displacement bent axis design. XPi - Presentation ADVANTAGES
XPi - Presentation the intelligent pump fixed displacement bent axis design The compact size envelope of XPi pumps, together with their technology, means they can be installed in environments with little
More informationXAi series. the intelligent pump - SAE version. fixed displacement bent axis design. XAi SAE version - Presentation ADVANTAGES
XAi SAE version - Presentation XAi series the intelligent pump - SAE version fixed displacement bent axis design The compact size envelope of XAi pumps, together their technology, means they can be installed
More informationXAi series. the intelligent pump - SAE version. fixed displacement bent axis design. XAi SAE version - Presentation ADVANTAGES
XAi SAE version - Presentation XAi series the intelligent pump - SAE version fixed displacement bent axis design The compact size envelope of XAi pumps, together with their technology, means they can be
More informationTXV - Characteristics
TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationTXV series. pumps with control. variable displacement piston pumps. TXV - Presentation ADVANTAGES
TXV - Presentation pumps with control variable displacement piston pumps ADVANTAGES Load Sensing. They self regulate to give ust the ow re uired for each movement. truck hydraulics market, TXV pumps are
More informationBrochure Hydraulic Pumps, Hydraulic Parts
www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr
More informationHydraulic piston PA PAC PAD. Series
Hydraulic piston pumps PA PAC PAD Series Contents Design of.... 1 Range and characteristics... 2 Characteristics and dimensions... 3 Performance.... 4-5 Accessories.... 6 Shaft sealing... 7 New models
More informationxxx displacement pumps TXV for trucks
Variable xxx xxx displacement pumps TXV for trucks 1 sommaire why use a variable displacement pump?... 3 your hydraulic equipment.................. 4 load-sensing.... 5 variable displacement... 6 TXV 40
More informationOrdering Code of 2PBA Pumps
Ordering Code of 2PBA Pumps Pump Code 3 Displacement ( cm ) Direction of Version Sealing Inlet Fittings 2PBA 18 L S N A A Suction Fittings Included N Nitrile V Viton S Special Version C Classic Version
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More information2PBA Pumps have the following advantages ;
2PBA Bent Axis Piston Pump 2PBA Pumps have the following advantages ; Compact Design, Economical Conception, High Power Density, High Overall Efficiency, High Rotating Speeds, High Output Pressure, 35
More informationvariable displacement DELTA SAE Serie m i
variable displacement pumps DELTA SAE Serie m i Contents xxx Range and characteristics... 1 Dimensions... 2 Performance.... 5 Control devices.... 4 to 8 Under development Delta pump with constant torque
More informationBENT AXIS HYDRAULIC MOTORS
BENT AXIS HYDRAULIC MOTORS FIXED DISLACEMENT make it simple 2 Contents Applications and efficiency........................ Definition and advantages......................... Operating conditions..............................
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationB e n t a x i s hydraulic motors MXP. Series
e n t a x i s hydraulic motors MXP Series Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
More informationHydraulic Pump Series F1plus Fixed Displacement
Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation
More informationB e n t a x i s hydraulic motors MXR. Series
e n t a x i s hydraulic motors MXR Series Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationB e n t a x i s hydraulic motors. MSeries
B e n t a x i s hydraulic motors MSeries Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
More informationB e n t a x i s hydraulic motors. MSeries
B e n t a x i s hydraulic motors MSeries Contents Definition and main applications of hydraulic motors, advantages of HYDRO LEDUC motors.............. 1 Operating conditions of motors... 2 Determining
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationHydraulic Pump Series VP1 Variable Displacement
Variable Displacement Catalog 9129 8222-02 February 1999, GB Content Page General information 3 Design 3 Specifications 4 Ordering information 4 VP1 cross section 4 Installation dimensions 5 Line dimensioning
More informationBent Axis Piston Motor, Fixed, Bi-directional Series: MFBP...1
Features 40 bent axis piston motor for high power and small overall dimensions Bi-directional rotation Rotation speed up to 8800 rpm Torque up to 840 Nm ( 619 ft-lbs) Side or rear port locations available
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationP2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
More informationBB Axial piston pumps MB Axial piston motors
BB Axial piston pumps MB s 05/09 BB AXIAL PISTON PUMPS MB AXIAL PISTON MOTORS BB AXIAL PISTON PUMPS and MB AXIAL PISTON MOTORS BB/MB series are a further development of our well known pumps and motors
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationGEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationHydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde
Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5
More informationHydraulic Pump Series F1 Fixed Displacement
Fixed Displacement Catalog 9129 8201-02 August, 1997 GB Content General information 3 Specifications 4 Pump and line selection 5 Ordering code 5 Standard versions 5 Installation dimensions 6 Installation
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationOMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
More informationTorque. Motor model R
MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationAP212 Gear Pumps. Standard and Low Noise series. Reference: 200-P EN-03 1/60. Issue:
Gear Pumps Standard and Low Noise series Reference: 2-P-99123-EN-3 Issue: 9.215 1/6 Contents Page 1 General information... 4 1.1 External gear pumps components... 5 1.2 Example of typical sound pressure
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationAxial Piston Fixed Motor A2FNM for Fan Drives and Flywheel Mass
Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FNM for Fan Drives and Flywheel Mass RE 91007/02.11 1/16 Data sheet Series 61
More informationTruck Hydraulics. F1 F2 T1 VP1 PTO info Accessories. Fixed and Variable Displacement Pumps, Motors and Accessories. Catalogue HY /UK April 2003
Fixed and Variable Displacement Pumps, Motors and Accessories Catalogue HY17-8200/UK April 2003 F1 F2 T1 VP1 PTO info Accessories Conversion factors 1 kg 2.20 lb 1 N 0.225 lbf 1 Nm 0.738 lbf ft 1 bar 14.5
More informationRadial Piston Pumps Description and Characteristics
Radial Piston Pumps Radial Piston Pumps Description and Characteristics DESCRIPTION The BHE radial piston pump range is made up of six basic models with 2, 4, 6, 8, 10 and 12 pistons. All of them are characterized
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationAxial Piston Fixed Displacement Pump KFA
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Fixed Displacement Pump KFA RE 91 501/06.03 1/12
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing
More informationVariable Displacement Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series
More informationAxial Piston Fixed Pump A17FNO Series 10
Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with
More informationHydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More informationVINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationIPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet
IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b
More informationHigh Pressure Gear Pumps KP 5
High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationIPVS High-pressure Internal Gear Pumps Technical Data Sheet
IPVS High-pressure Internal Gear Pumps Technical Data Sheet Functional Drawing 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing segment 5 Axial
More informationTECHNICAL UNION
Bent Axis Pump This hydraulic pump is a Bent Axist type pump, with fixed displacement, developed under the design of spherical head pistons. This design is extremely efficient, as well as high performance.
More informationHYDRAULIC MOTORS EPMT
HYDRAULIC APPLICATION Conveyors; Metal working machines; Machines for agriculture; Road building machines; Mining machinery; Food industries; Special vehicles; Plastic and rubber machinery etc. CONTENTS
More informationHYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG. Hybel - Hydraulic Oil Pumps and Motors
HYDRAULIC OIL PUMPS AND MOTORS PRODUCT CATALOG Hybel Hydraulic Oil Pumps and Motors HYDRAULIC OIL PUMPS AND MOTORS Contents CONTENTS About us.... 04 Products Line.... 06 Configure your product.... 08 Aluminibeta
More informationAxial Piston Fixed Pump A2FO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal
More informationGear Pumps - AP05. Reference: 200-P EN-05 1/26. Issue:
Gear Pumps - Reference: 200-P-991218-EN-05 Issue: 09.2015 1/26 Contents Page 1 General information... 3 1.1 Introduction to the product... 3 1.2 Non-standard symbols used in the text... 4 2 Technical information...
More informationHYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries.
HYDRAULIC MH APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
More informationFixed Plug-In Motor A2FE
Fixed Plug-In Motor 2FE RE 91 008/09.07 1/16 Replaces: 04.05 echnical data sheet Series 6 Sizes Nominal pressure/peak pressure 28 to 180 400/450 bar 250 and 355 350/400 bar Open and closed circuits Contents
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationTruck Hydraulics. Serie VP1 Variable Displacement Pumps
ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line
More informationPump SCP / SCPT 090,130 DIN, SAE
3118 GB Pump SCP 012-108 / SCPT 090,130 DIN, SAE Sunfab SCP and SCPT are range of piston pumps of a bent axis design with fixed displacement for demanding mobile hydraulics. It covers the whole displacement
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationVariable displacement axial piston pumps,
LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar
More informationFixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
More informationHydraulic Motor/Pump Series F11/F12 zp12
Hydraulic Motor/Pump zp12 Fixed Displacement zp11 Catalogue HY17-8249/US March 2004 Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264 US gallon 1 cm
More informationAXIAL PISTON PUMPS SHPV SECTIONAL VIEW
AXIAL PISTON PUMPS SHPV SECTIONAL VIEW 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working loop (high pressure) working loop (low pressure) control fluid suction line case drain fluid Above figure shows schematically
More informationAxial Piston Fixed Motor A2FM
Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed
More informationCatalog HY /NA. Catalog HY /NA. Parker Hannifin Corporation Hydraulic Pump Division Marysville, Ohio USA
Catalog HY28-6/NA PV, PVT Series Piston Pumps Variable Volume Catalog HY28-6/NA 1 Catalog HY28-6/NA Notes Series PV 2 Catalog HY28-6/NA Introduction Series PV Quick Reference Data Chart Pump Delivery Approx.
More informationHigh Pressure Internal Gear Pumps Series QX
High Pressure Internal Gear Pumps Series QX motion and progress 1 / 32 Classification: 410.10..00 Reference: -P -000021 -E -06 / 05.05 Contents 1 General 1.1 Product description 3 1.2 Advantages 3 2 Technical
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationHydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
More informationHydraulic Motor/Pump Series F11/F12
Hydraulic Motor/Pump Fixed Displacement Catalogue HY30-8249/UK October 2006 Basic formulas for hydraulic motors Flow (q) D x n q = 1000 x η [l/min] v Torque (M) M = D x p x η hm 63 Power (P) q x p x η
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More information» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries
HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS
More informationAxial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007
Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke
More informationVariable Plug-in Motor A6VE
Variable Plug-in Motor 6VE RE 91616/01.12 1/52 Data sheet Series 71 Sizes 60 to 170 Nominal pressure 450 bar Maximum pressure 500 bar Open and closed circuits Contents Ordering code for standard program
More informationHYDRAULICS VINCKE HYDRAULIC PUMPS
VINCKE HYDRAULIC PUMPS TECH-VHP200.1 index 3 link to your page / link a su página Gear pumps Introduction 3 Group 0 3 Group 1 3 Group 2 3 Group 3 4 6 7 12 18 Variable displacement pumps 21 Hand pumps 3
More informationNVP Series Variable Displacement Piston Pumps
www.nimco-controls.com NVP Series Variable Displacement Piston Pumps Performance Through Precision Control www.nimco-controls.com Contents Page 4 Page 5 Page 6 Page 7 General Pump Description Performance
More informationOildyne. Miniature Piston Pumps 5 Piston Design. Pressures to 276 bar (4000 psi) Displacements from.156cc/rev to.865cc/rev (.01 to.
Oildyne 5 Piston Design Pressures to 276 bar ( psi) Displacements from.156cc/rev to.865cc/rev (.1 to.5 in 3 /rev) 29 Features Pumping Efficiencies to 9% Allow You to Effectively Use.156 to.865 cc Flow
More informationContents Page Chapter. - Volvo PTO s Scania PTO s Universal for Scania ED 90 engines for Scania ED 120 engines...
Adapter kits and accessories for F1, F2, T1 and VP1 pumps Contents Page Chapter PTO Air valve kits: - Volvo PTO s...48 - Scania PTO s...48 - Universal... 48 PTO adapter kits: - for Scania ED 90 engines...49
More informationVariable Displacement Piston Pumps Series P2/P3. General Information. P3 Series
General Information General Information P2 Series The newly developed variable displacement piston pumps from Parker Hannifin, designated P2, are intended for mobile applications, featuring a very compact
More informationAxial Piston Variable Pump A4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump A4VG RE 92003/03.09 1/64 Replaces: 09.07 Data sheet Series 32 Sizes 28...250
More informationAXIAL PISTON PUMPS VARIABLE DISPLACEMENT
FEATURES The Series is a family of variable displacement axial piston pumps for use in closed circuits. The displacement is continuously variable by means of a tilting swash plate and the oil flow direction
More informationVariable Displacement Piston Pumps for Industrial Applications
Vickers Piston Pumps Variable Displacement Piston Pumps for Industrial Applications PVQ2 Family 21,1 to 141 cm 3 /r (1.29 to 8.64 in 3 /r) Displacements 23 bar (33 psi) Max. Pressure 514./EN/598/A Introduction
More informationAxial Piston Variable Pump AA4VG
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Axial Piston Variable Pump AA4VG RA 92003-A/06.09 1/64 Replaces: 03.09 Data sheet Series 32 Size 28...
More informationAxial piston pumps type PVPC variable displacement, by a full line of mechanical controls
www.atos.com Table A600/E Axial piston pumps type PVPC variable displacement, by a full line of mechanical controls PVPCCH4046 PVPC are variable displacement axial piston pumps for high pressure operation,
More information