Institut za transport INTRA d.o.o. Podgorica Kontrolno tijelo Nikšićki put 20, Podgorica

Size: px
Start display at page:

Download "Institut za transport INTRA d.o.o. Podgorica Kontrolno tijelo Nikšićki put 20, Podgorica"

Transcription

1 Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem K A Annex to Accreditation Certificate - Accreditation Number K A Standard: MEST EN ISO/IEC :2013 Datum dodjele/ obnavljanja akreditacije: Date of granting/ renewal of accreditation / Akreditacija važi do: Accreditation is valid to: Akreditovano kontrolno tijelo tipa A Accredited Inspection Body type A Institut za transport INTRA d.o.o. Podgorica Kontrolno tijelo Nikšićki put 20, Podgorica Područje akreditacije / The scope of accreditation Kontrolisanje ispravnosti ugradnje uređaja i opreme za pogon motornih vozila na tečni-naftni gas, Uzorkovanje i kontrola i ocjenjivanje usaglašenosti kvaliteta Inspection of accuracy fitting device and equipment for power unit motor vecihle on liquidoil gas, Sampling and Control of liquid fuels of petroleum and conformity assessment quality ATCG Q izdanje /izmjena 1/3 Datum: Strana: 1/7

2 Detaljan obim akreditacije/ Detailed scope of accreditation Kontrolno tijelo, Nikšićki put 20, Podgorica * Metoda kontrolisanja se sprovodi na terenu ** Metoda kontrolisanja se sprovodi u Kontrolnom tijelu i na terenu d b No Propis, standard ili validovana metoda gulation, standard or valid method of 1 Uređaji i oprema za pogon vozila na tečni naftni gas (TNG) Instruments and Equipment for Motor Vehicles on Liquid-Oil Gas **Vizuelno Visual Inspection **Kontrolisanje kompletnosti Completeness Inspection **Dimenziona kontrola Dimensional Inspection **Kontrola nepropusnosti spojeva Inspection of impervious joint Pravilnik o tehničkim zahtjevima i drugim uslovima za uređaje i opremu za pogon motornih vozila na TNG ili prirodni gas (Sl.list Crne Gore 23/13) gulation of Tehnical quirements ande other conditions for devices and equipment for motor vehicles using liquid petroleum gas (Official Gazete Montenegro No.23/13) PR.KO Procedura za sprovođenje procesa kontrolisanja uređaja i opreme za pogon vozila na TNG i prirodni gas izdanje 08 od ) PR.KO The procedure for implementing process conntrol devices and equipment for vehicles powered by LPG and natural gas (edition 08 of ) UP.KO Uputstvo za rad na pregledu vozila koja za pogon koriste TNG ( izdanje 04 od ) UP.KO Instrukcions for work on the review of the vehicles that are powered by LPG (edition 04 of ) ATCG Q izdanje /izmjena 1/3 Datum: Strana: 2/7

3 gulation, standard or valid method of MEST EN ISO 3171 : 2014 Tečni naftni proizvodi - Automatsko uzimanje uzoraka 2 Proizvodi od nafte (tečna goriva naftnog porijekla) Eurodizel Dizel gorivo D 0.1 Ulje za loženje ekstra lakoel Motorni benzini Eurosuper 95 Motorni benzin Eurosuper 98 Tečni naftni gas - TNG * Uzorkovanje Automatsko Sampling Automatic MEST EN ISO 3171 : 2014 Petroleum liquids Automatic pipeline sampling MEST EN : 2013 Goriva za motorna vozila Ocjenjivanje kvaliteta benzina i dizel goriva-uzimanje uzoraka goriva iz pumpnih automata na benzinskim stanicama i komercijalnim stanicama Petroleum products (liquid fuels of petroleum ) Eurodiesel Diesel Fuel D 01,1 Heating oil extra light Motor gasoline Eurosuper 95 Motor gasoline Eurosuper 98 Liquefied petroleum gas-lpg * Uzorkovanje Ručno MEST EN : 2013 Automative fuels-assessment of petrol and diesel fuel quality-sampling from retail site pumps and commercial site fuel dispensers MEST EN ISO 3170 : 2010 Tečni naftni proizvodi Ručno uzimanje uzoraka Sampling Manually MEST EN ISO 3170 : 2010 Petroleum liquids-manual sampling MEST ISO 4257: 2011 Tečni naftni gasovi Metoda uzimanja uzoraka MEST ISO 4257: 2011 Liquefied petroleum gases-method of sampling ATCG Q izdanje /izmjena 1/3 Datum: Strana: 3/7

4 gulation, standard or valid method of PR.KO Procedura za rukovanje, dostavu, skladištenje i čuvanje uzoraka (izdanje 02 od ) Proizvodi od nafte (tečna goriva naftnog porijekla) Eurodizel Dizel gorivo D 0.1 Ulje za loženje ekstra lakoel Motorni benzini Eurosuper 95 Motorni benzin Eurosuper 98 Tečni naftni gas - TNG Petroleum products (liquid fuels of petroleum ) Eurodiesel Diesel Fuel D 01,1 Heating oil extra light Motor gasoline Eurosuper 95 Motor gasoline Eurosuper 98 Liquefied petroleum gas-lpg *Uzorkovanje Automatsko Ručno Sampling Automatic Manually PR.KO Procedure for handling, shiping and storage of samples (edition 02 of ) UP.KO Uputstvo za uzimanje uzoraka tečnih goriva naftnog porijekla dizela, motornog benzina i lož ulja ekstra lakog (izdanje 01 od ) UP.KO Instrukcions for taking samples of liquid fuels of oil, of diesel, petrol and heating oil extra light (edition 01 of ) UP.KO Uputstvo za uzimanje uzoraka tečnog naftnog gasa TNG ( izdanje 01 od ) UP.KO Instrukcion for taking samples of liquefied petroleum gas LPG (edition 01 of ) ATCG Q izdanje /izmjena 1/3 Datum: Strana: 4/7

5 gulation, standard or valid method of MEST EN 590:2014/Co1:2015 Goriva za motorna vozila- Dizel gorivo- Zahtjevi i metode ispitivanja Eurodizel Eurodiesel ** Kvalitativno Qualitative control MEST EN 590:2014/Co1:2015 Automotive fuels Diesel- quirements and test methods (Sl. List CG br1/16) ( Prilog 4) 3 gulation on the quality and control of (Annexes 4) Dizel gorivo D 0.1 Diesel Fuel D 01,1 **Kvalitativno (Sl.list Crne Gore 01/16) ( Prilog 1) Qualitative control gulation on the quality and control of (Annexes 1) ATCG Q izdanje /izmjena 1/3 Datum: Strana: 5/7

6 gulation, standard or valid method of Motorni benzini Eurosuper 95 Motor gasoline Eurosuper 95 Motorni benzin Eurosuper 98 Motor gasoline Eurosuper 98 MEST EN 228 : 2013 Goriva za motorna vozila- Bezolovni benzin - Zahtjevi i metode ispitivanja MEST EN 228 : 2013 Automotive fuels Unleaded petrol- quirements and test methods (Sl. List CG br1/16) ( Prilog 3) ** Kvalitativno Qualitative control gulation on the quality and control of (Annexes 3) Ulje za loženje ekstra lakoel Heating oil extra light (Sl.list Crne Gore 01/16) (Prilog 2) gulation on the quality and control of (Annexes 2) Tečni naftni gas TNG Liquefied petroleum gas -LPG MEST EN 589 : 2013 Goriva za motorna vozila- LPG - Zahtjevi i metode ispitivanja MEST EN 589 : 2013 Automotive fuels LPG - quirements and test methods ATCG Q izdanje /izmjena 1/3 Datum: Strana: 6/7

7 Ovаj obim vаži sаmo uz Sertifikаt o аkreditаciji sа аkreditаcionim brojem K A od i zajedno sa njim zamjenjuje sve prethodno izdate obime akreditacije. This Scope of accreditation is valid only with accreditation certificate No K A issued on and along whit it replaces any previous scope of accreditation. Direktor ATCG Ranko Nikolić ATCG Q izdanje /izmjena 1/3 Datum: Strana: 7/7

Institut za transport INTRA d.o.o. Podgorica Društvo za istraživanje i razvoj transporta i njihovih sredstava Kontrolno tijelo

Institut za transport INTRA d.o.o. Podgorica Društvo za istraživanje i razvoj transporta i njihovih sredstava Kontrolno tijelo Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem K A 08.01 Annex to Accreditation Certificate - Accreditation Number K A 08.01 Standard: MEST EN ISO/IEC 17020 :2013 Datum dodjele/ obnavljanja

More information

Privredno društvo za tehničko ispitivanje i analizu "Jugoinspekt Control" d.o.o. Bar Laboratorija

Privredno društvo za tehničko ispitivanje i analizu Jugoinspekt Control d.o.o. Bar Laboratorija Dodatak Sertifikatu o akreditaciji - identifikacioni broj: ATCG-0049 Annex to Accreditation Certificate-Identification Number:ATCG-0049 Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem Li 16.23

More information

ADRIAINSPEKT d.o.o. Poslovnica za naftu i naftne proizvode Department for oil and oil products Ciottina 17b, HR Rijeka

ADRIAINSPEKT d.o.o. Poslovnica za naftu i naftne proizvode Department for oil and oil products Ciottina 17b, HR Rijeka PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref. : 383-02/09-75/19 Urbroj/Id. : 569-04/2-09-50 Datum izdanja priloga /Annex Issued on: 2009-10-30 Norma: HRN EN ISO/IEC

More information

ABG TEST d.o.o. Podgorica Laboratorija za ispitivanje asfalta, betona i geomehanike Ul. Zetskih Vladara bb Podgorica

ABG TEST d.o.o. Podgorica Laboratorija za ispitivanje asfalta, betona i geomehanike Ul. Zetskih Vladara bb Podgorica Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem Li 08.04 Annex to Accreditation Certificate - Accreditation Li 08.04 Standard: ISO/IEC 17025 :2011 Datum dodjele/ obnavljanja akreditacije: Date

More information

ABG TEST d.o.o. Podgorica Laboratorija za ispitivanje asfalta, betona i geomehanike Ul Zetskih Vladara bb Podgorica

ABG TEST d.o.o. Podgorica Laboratorija za ispitivanje asfalta, betona i geomehanike Ul Zetskih Vladara bb Podgorica Dodatak Sertifikatu o akreditaciji broj: Li 08.04 Annex to Accreditation Certificate : Li 08.04 Standard: ISO/IEC 17025 :2011 Datum dodjele/ obnavljanja akreditacije: Date of granting/ renewal of accreditation:.

More information

Institut za transport INTRA d.o.o. Podgorica Laboratorija za ispitivanje Nikšićki put br. 20, Podgorica

Institut za transport INTRA d.o.o. Podgorica Laboratorija za ispitivanje Nikšićki put br. 20, Podgorica Dodatak Sertfkatu o akredtacj - dentfkacon broj: ATCG-0033 Replaces Annex dated: 26.10.2015. Dodatak Sertfkatu o akredtacj sa akredtaconm brojem L 09.06 Annex to Accredtaton Certfcate - Accredtaton Number

More information

VELEPRODAJNI CENOVNIK ''NISOTEC"

VELEPRODAJNI CENOVNIK ''NISOTEC VELEPRODAJNI CENOVNIK ''NISOTEC" ŠIFRA SAP NAZIV BAR KOD PAK. JM 1.1 Motorna ulja za putnička vozila 21436 NISOTEC AUTOLINE PS SAE 10W-40 8600142193541 1 lit KOM 295,00 21437 NISOTEC AUTOLINE PS SAE 10W-40

More information

Annex of the Certificate (Page 1/4) Scope of Accreditation

Annex of the Certificate (Page 1/4) Scope of Accreditation Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : Keresteciler Sitesi E Blok No:5 Kat:2 Ostim / Yenimahalle 06170 ANKARA/TÜRKİYE Phone : +90 312 385 95 30 Fax : +90 312 386 00

More information

OPTIMALNO UVOĐENJE ČISTIH GORIVA U HRVATSKOJ

OPTIMALNO UVOĐENJE ČISTIH GORIVA U HRVATSKOJ M. Jednačak Uvođenje čistih goriva... Miroslav Jednačak ISSN 0350-350X GOMABN 43, 6, 317-330 Stručni rad / Professional Paper UDK 351.777 (4) : 614.7 : 665.6.013.5.001.6.001.26.001.23 : 340.134 : 336.57

More information

BERMUDA STATUTORY INSTRUMENT BR 54/1988 LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND TRANSPORT) REGULATIONS 1988

BERMUDA STATUTORY INSTRUMENT BR 54/1988 LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND TRANSPORT) REGULATIONS 1988 Laws of Bermuda Title 20 Item 2(e) BERMUDA STATUTORY INSTRUMENT BR 54/1988 LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, [made under section 3(1) of the Building Authority Act 1962 [title 20 item 2] and

More information

Crna Gora Cjenovnik 1. SEPTEMBAR

Crna Gora Cjenovnik 1. SEPTEMBAR Crna Gora Cjenovnik 1. SEPTEMBAR 2015. WWW.MAZDA.CO.ME Mazda2 (5 vrata) Mazda2 G75 Emotion 55 / 75 5 brzina 11.390 Mazda2 G75 Challenge 55 / 75 5 brzina 11.890 Mazda2 G90 Challenge 66 / 90 5 brzina 12.390

More information

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016

DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016 Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection

More information

LIQUEFIED PETROLEUM GAS AS AUTOMOTIVE FUEL IN ENVIRONMENTAL PROTECTION

LIQUEFIED PETROLEUM GAS AS AUTOMOTIVE FUEL IN ENVIRONMENTAL PROTECTION NADA STRUMBERGER, D. Sc. Fakultet prometnih znanosti Zagreb, Vukeliceva 4 RENATA BRADVICA, B. A Druga osnovna skola Vukovar SASA VIAKIC, B. Eng. Autoskola "Zadar", Zadar Traffic Safety and Ecology Review

More information

Crna Gora Cjenovnik. 15. JANUAR

Crna Gora Cjenovnik. 15. JANUAR Crna Gora Cjenovnik 15. JANUAR 2017. www.mazda.co.me Mazda2 (5 vrata) Mazda2 G75 Emotion 55 / 75 5 brzina 11.590 Mazda2 G75 Challenge 55 / 75 5 brzina 12.090 Mazda2 G75 TAKUMI 55 / 75 5 brzina 13.590 Mazda2

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest

More information

Irving Oil Whitegate Refinery Limited

Irving Oil Whitegate Refinery Limited Irving Oil Whitegate Refinery Limited Whitegate, Midleton, Co. Cork Testing Laboratory Registration number: 258T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the

More information

PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL

PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL Kenya Bureau of Standards PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL 2016-01-14 Version 2.0 Page 1 1.0 INTRODUCTION 1.1 Purpose and Background This manual provides a frame work for inspection of petroleum

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen

More information

CertRom. BUCHAREST, S5 Calea 13 Septembrie 231A; Ph: , Fax: ;

CertRom. BUCHAREST, S5 Calea 13 Septembrie 231A; Ph: , Fax: ; Promoting use of biofuels and bioliquids in Romania - the legal framework - Ministry of Economy and Trade and of Business Environment The 2003/30/CE Directive has been transposed into Government Decision

More information

BERMUDA LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND TRANSPORT) REGULATIONS 1988 BR 54 / 1988

BERMUDA LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND TRANSPORT) REGULATIONS 1988 BR 54 / 1988 QUO FA T A F U E R N T BERMUDA LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND BR 54 / 1988 [made under section 3(1) of the Building Authority Act 1962 and brought into operation on 27 July 1988]

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-23806-3 SOUTH AFRICAN NATIONAL STANDARD The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation

More information

NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (ACT 5 OF 2008) AS AMENDED THROUGH THE LEGAL METROLOGY ACT (ACT 9 OF 2014)

NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (ACT 5 OF 2008) AS AMENDED THROUGH THE LEGAL METROLOGY ACT (ACT 9 OF 2014) 284 No. 41473 GOVERNMENT GAZETTE, 2 MARCH 2018 N0.173 DEPARTMENT OF TRADE AND INDUSTRY 02 MARCH 2018 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (ACT 5 OF 2008) AS AMENDED THROUGH THE LEGAL METROLOGY

More information

30-Aug-11. VCA job number: CSM Date: 30 August Dear Sirs,

30-Aug-11. VCA job number: CSM Date: 30 August Dear Sirs, VCA job number: CSM241075 Date: 30 August 2011 Dear Sirs, 1. The vehicle type / component described on the attached approval(s) has been tested and meets the requirements of the ECE Regulation / EEC Directive

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-19459-8 SOUTH AFRICAN NATIONAL STANDARD Verification standards for the verification of volume-measuring instruments, including commercial standards of volume Published by Standards South

More information

Ru~ne pumpe Hand pumps KLIPNE, VISOKOG PRITISKA, ZA OP[TE I POSEBNE NAMENE PISTON PUMP, HIGH PRESSURE, FOR GENERAL AND SPECIAL PURPOSE

Ru~ne pumpe Hand pumps KLIPNE, VISOKOG PRITISKA, ZA OP[TE I POSEBNE NAMENE PISTON PUMP, HIGH PRESSURE, FOR GENERAL AND SPECIAL PURPOSE HYDRULICS umpe umps Ru~ne pumpe Hand pumps KLINE, VISOKOG RIISK, Z O[E I OSEBNE NENE ISON U, HIGH RESSURE, FOR GENERL ND SECIL UROSE Ru~ne pumpe se primenjuju u raznim sistemima naj~e{}e kao ure aji za

More information

Carl Stuart Ltd. Tallaght Business Park, Whitestown, Dublin 24. Calibration Laboratory Registration number: 270C

Carl Stuart Ltd. Tallaght Business Park, Whitestown, Dublin 24. Calibration Laboratory Registration number: 270C Tallaght Business Park, Whitestown, Dublin 24 Calibration Laboratory Registration number: 270C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule bearing

More information

E/ECE/324/Rev.2/Add.114/Rev.1 E/ECE/TRANS/505/Rev.2/Add.114/Rev.1

E/ECE/324/Rev.2/Add.114/Rev.1 E/ECE/TRANS/505/Rev.2/Add.114/Rev.1 21 August 2013 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 16861 First edition 2015-05-15 Petroleum products Fuels (class F) Specifications of dimethyl ether (DME) Produits pétroliers Combustibles (classe F) Spécifications du diméthyléther

More information

PTV TECHNICAL PRESCRIPTIONS. ELASTOMERIC SEALS: Part 1: Vulcanized Rubber FOR. Impartial institute for the monitoring of construction products

PTV TECHNICAL PRESCRIPTIONS. ELASTOMERIC SEALS: Part 1: Vulcanized Rubber FOR. Impartial institute for the monitoring of construction products PTV 8681-1 TECHNICAL PRESCRIPTIONS TECHNICAL PRESCRIPTIONS FOR ELASTOMERIC SEALS: Part 1: Vulcanized Rubber COPRO vzw Version 1.0 dated 2017-10-17 Impartial institute for the monitoring of construction

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that has been assessed by ANAB and meets the requirements

More information

Annex of the Certificate (Page 1/5) Scope of Accreditation

Annex of the Certificate (Page 1/5) Scope of Accreditation Annex of the Certificate (Page 1/5) As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe 34843 İSTANBUL/TÜRKİYE Phone : +90 216 518 40 50 Fax :

More information

Hellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION

Hellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION Hellenic Accreditation System Annex F2/17 to the Certificate No. 263-5 SCOPE of ACCREDITATION of the Testing & Calibration Laboratory of LINK LAB LTD for the performance of calibrations Measurand / Spectrophotometric

More information

HYDROGEN REFUELLING STATIONS (HRS): RECENT AND CURRENT PERSPECTIVES

HYDROGEN REFUELLING STATIONS (HRS): RECENT AND CURRENT PERSPECTIVES HYDROGEN REFUELLING STATIONS (HRS): RECENT AND CURRENT PERSPECTIVES HYLAW UK WORKSHOP CITY HALL 8 TH NOVEMBER 2018 NICK HART, ITM POWER PLC HRS: RECENT AND CURRENT PERSPECTIVES HYLAW UK WORKSHOP CITY HALL

More information

For the National Voluntary Laboratory Accreditation Program

For the National Voluntary Laboratory Accreditation Program SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Florida Department of Agriculture Metrology Laboratory 3125 Conner Blvd. Lab #2 Tallahassee, FL 32399-1650 Ms. Amy Smith Phone: 850-921-1570 Fax: 850-921-1593

More information

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s) of this document.

More information

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.

Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan. Issue : 10/08/15 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan. The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)

More information

11-Feb-14. VCA job number: CSP Date: 11 February Dear Sirs,

11-Feb-14. VCA job number: CSP Date: 11 February Dear Sirs, VCA job number: CSP286503 Date: 11 February 2014 Dear Sirs, 1. The vehicle type / component described on the attached approval(s) has been tested and meets the requirements of the ECE Regulation / EEC

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com

More information

Kondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001)

Kondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001) SVENSK STANDARD SS-EN ISO 4257 Fastställd 2001-09-14 Utgåva 2 Kondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001) ICS 75.160.30

More information

FY2018 Greenhouse Gas Inventory Report

FY2018 Greenhouse Gas Inventory Report FY2018 Greenhouse Gas Inventory Report Introduction This document is the annual greenhouse gas (GHG) emissions inventory report for the Air New Zealand group of companies for the period 1 July 2017 to

More information

RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC

RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references 18 January 2019 RSB reference code: RSB-DOC-10-001 Published by the Roundtable on Sustainable Biomaterials. This publication

More information

RSB List of Documents and references

RSB List of Documents and references Type of document: Reference Document Date: 20 March 2017 RSB List of Documents and references RSB reference code: [RSB-DOC-10-001] Published by the Roundtable on Sustainable Biomaterials. This publication

More information

CERTIFICATE OF ACCREDITATION

CERTIFICATE OF ACCREDITATION CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Energy Assurance, LLC 5202 Belle Wood Court,

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL

More information

THE ENERGY EFFICIENCY ACT. Regulations made by the Minister under section 23 of the Energy Efficiency Act

THE ENERGY EFFICIENCY ACT. Regulations made by the Minister under section 23 of the Energy Efficiency Act Government Notice No... of 2016 THE ENERGY EFFICIENCY ACT Regulations made by the Minister under section 23 of the Energy Efficiency Act 1. These regulations may be cited as the Energy Efficiency (Labelling

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works

More information

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,

More information

Small craft Electric propulsion system

Small craft Electric propulsion system INTERNATIONAL STANDARD ISO 16315 First edition 2016-03-15 Small craft Electric propulsion system Petits navires Système de propulsion électrique Reference number ISO 16315:2016(E) ISO 2016 ISO 16315:2016(E)

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO., LTD. AUTOMOTIVE TRIM & ELECTRONICS TESTING LABORATORY. China Technical Center No. 1001 North Qinzhou Rd. Shanghai,

More information

MEASUREMENTS OF SHOCK WAVE FORCE IN SHOCK TUBE WITH INDIRECT METHODS

MEASUREMENTS OF SHOCK WAVE FORCE IN SHOCK TUBE WITH INDIRECT METHODS Rudarsko-geološko-naftni zbornik Vol. 17 str. 55-60 Zagreb, 2005. UDC 622.235.41 Original scientific paper Originalni znanstveni rad Language/Jezik: English/Engleski MEASUREMENTS OF SHOCK WAVE FORCE IN

More information

Certificate of constancy of performance

Certificate of constancy of performance 0402-CPR-SC0221-16 In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction s Regulation or CPR), this certificate applies to the construction

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

THE UNITED KINGDOM TYPE APPROVAL AUTHORITY

THE UNITED KINGDOM TYPE APPROVAL AUTHORITY THE UNITED KINGDOM TYPE APPROVAL AUTHORITY Dear Sir / Madam. Date: 19 January 2015 1. The vehicle component / type described on the attached approval(s) has been tested and meets the requirements of the

More information

Europass Curriculum Vitae

Europass Curriculum Vitae Europass Curriculum Vitae Personal information First name(s) / Surname(s) Danilo Nikolic Address(es) (Home) Dzordza Vasingtona 5, Podgorica, Montenegro (Business) Dobrota 36, Kotor, Montenegro Telephone(s)

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia

More information

Engine conversions to LPG or CNG are expensive and complex. The solution is InjectoReducer

Engine conversions to LPG or CNG are expensive and complex. The solution is InjectoReducer Engine conversions to LPG or CNG are expensive and complex The solution is InjectoReducer Why use LPG or CNG? What is LPG Liquefied Petroleum Gas is a gas mostly propane and butane stored in a cylindrical

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 20847 First edition 2004-03-15 Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry Produits pétroliers Détermination

More information

CONTENT. Introduction. INA Group at a glance. Overview of 2017 results. Core businesses. Exploration and Production. Refining and Marketing

CONTENT. Introduction. INA Group at a glance. Overview of 2017 results. Core businesses. Exploration and Production. Refining and Marketing Company profile CONTENT Introduction 1 INA Group at a glance 2 Overview of 2017 results 4 Core businesses 6 Exploration and Production 6 Refining and Marketing 8 Consumer Services and Retail 10 Corporate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1, 2, 3 CONTINENTAL AUTOMOTIVE SYSTEMS 2400 Executive Hills Blvd. Auburn Hills, MI 48326 Mr. David E. Swift Phone: 248 209 3813 Email: david.swift@continental-corporation.com

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTINENTAL AUTOMOTIVE SYSTEMS 570 Capital Drive Lake Zurich, IL 60047 Mr. Ken Klimek (Authorized Representative) Phone: 847-862-0131 Email: ken.klimek@continental-corporation.com

More information

GREENER SHIPPING SUMMIT 2017

GREENER SHIPPING SUMMIT 2017 GREENER SHIPPING SUMMIT 2017 EU MRV Regulation Methods of Data Collection of Fuel Differences/Consequences/Evaluation of Methods Antonios Georgantzis 14 November 2017 Eugenides Foundation The EU MRV Timeline

More information

Certification Scheme

Certification Scheme Certification Scheme Barbecues burning solid fuels in accordance with DIN EN 1860-1 (Edition: August 2015) DIN CERTCO Alboinstrasse 56 12103 Berlin Tel.: +49 30 7562-1131 Fax: +49 30 7562-1141 E-mail:

More information

Evaluation of Visibility From Powered Industrial Trucks

Evaluation of Visibility From Powered Industrial Trucks ANSI/ITSDF B56.11.6-2005 (Reaffirmation of ASME B56.11.6 1992) Evaluation of Visibility From Powered Industrial Trucks AN AMERICAN NATIONAL STANDARD INDUSTRIAL TRUCK STANDARDS DEVELOPMENT FOUNDATION A

More information

Fuel quality improvements in the Republic of Serbia

Fuel quality improvements in the Republic of Serbia Republic of Serbia Ministry of Agriculture and Environmental Protection Fuel quality improvements in the Republic of Serbia Jasmina Bogdanovic, Air and Ozone Layer Protection Unit Environment and the fuel

More information

Type: Office work chair Lab.no.: Depth: 650 mm Width: 710 mm Height: 1345 mm Weight: 18,8 kg. EN :2009 and EN :2009.

Type: Office work chair Lab.no.: Depth: 650 mm Width: 710 mm Height: 1345 mm Weight: 18,8 kg. EN :2009 and EN :2009. Lanab Design Aktiebolag Attn.: Åke Jansson Lerbacksgatan 7 SE-571 38 NÄSSJÖ Order no. 515628 Appendices 3 Initials laha/prni/hbs Report Material: Model: LD6340/LD6240 Type: Office work chair Lab.no.: 515628-2

More information

THERMAL SHOCK TEST REPORT

THERMAL SHOCK TEST REPORT Report No. :DH1509300024A Version:A THERMAL SHOCK TEST REPORT Company :FLIP CHIP OPTO. INC. Address :No.185, Kewang Rd., Longtan Dist., Taoyuan City 325, Taiwan (R.O.C.) Model Name :Apollo 600-B Lot Number

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2019 Certificate Number: 2563.02

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division and the Engine, Emissions and Vehicle Research Division

More information

Contact person Date Reference Page Michael Lindblad F000833F 1 (1) Sustainable Built Environment

Contact person Date Reference Page Michael Lindblad F000833F 1 (1) Sustainable Built Environment issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-06-25 5F000833F 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Martela AB

More information

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005

Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005 Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

Test Report. on Type Testing of Diaphragm Gland Seal Valves Type RWH-03 according to EN ISO 10297:2014

Test Report. on Type Testing of Diaphragm Gland Seal Valves Type RWH-03 according to EN ISO 10297:2014 HBAM Test Report Bundesanstalt für Materialforschung und -prüfung on Type Testing of Diaphragm Gland Seal Valves Type RWH-03 according to EN ISO 10297:2014 Reference 2-1478/2015 DGA reference DGA-14-068

More information

contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.

contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p. contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug

More information

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion IAS Accreditation Number Company Name Address Contact Name Telephone +966-14-398-2118 Effective Date of Scope May 1, 2018 Accreditation Standard ISO/IEC 17025:2017 TL-743 Yanbu Industrial Area Yanbu, Madina

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ICS 23.020.10; 75.200 ISBN 0-626-15187-2 SOUTH AFRICAN NATIONAL STANDARD Above-ground storage tanks for petroleum products Published by Standards South Africa 1 dr lategan road groenkloof! private bag

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2016 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical

More information

Contact person Date Reference Page Michael Lindblad F013838C 1 (1) Sustainable Built Environment

Contact person Date Reference Page Michael Lindblad F013838C 1 (1) Sustainable Built Environment issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-09-17 5F013838C 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Johanson Design

More information

TESTING LABORATORY FOR CIVIL ENGINEERING MATERIALS

TESTING LABORATORY FOR CIVIL ENGINEERING MATERIALS TESTING LABORATORY FOR CIVIL ENGINEERING MATERIALS INSTITUTE FOR REASEARCH OF CIVIL ENGINEERING MATERIALS, STONE- AND CONCRETE CONSTRUCTION AND FIRE INTEGRITY MPA BRAUNSCHWEIG Inspection report nr (3329/2706)

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 16924 First edition 2016-12-01 Natural gas fuelling stations LNG stations for fuelling vehicles Stations-service de gaz naturel Stations GNL pour le ravitaillement de véhicules

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. AUTO TECHNOLOGY COMPANY Progress Drive Strongsville, OH Kevin Smith MECHANICAL SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTO TECHNOLOGY COMPANY 20026 Progress Drive Strongsville, OH 44149 Kevin Smith 440 572 7800 MECHANICAL Valid To: December 31, 2013 Certificate Number: 2563.02

More information

Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN

Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN Information for the Certification of Weld Shops in Rail Vehicle Construction According to DIN EN 15085-2 Certificate According DIN EN 15085-2 Railway applications - Welding of railway vehicles and components

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 12156-1 Third edition 2016-02-01 Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method Carburant diesel Évaluation du pouvoir

More information

ISO epoint.edu.vn ISO page 1 / 5

ISO epoint.edu.vn ISO page 1 / 5 page 1 / 5 page 2 / 5 iso 33000 pdf 3.11 2007/1 Page 1-4 ISO Trapezoidal screw threads Tr WWW.F-M-S.DK NOMINAL PITCH DIAMETER d 2 & D 2 d 2 /D 2 = d/d PDn (PDn = 0.5P) EXTERNAL THREAD d = major diameter

More information

EDICT ± OF GOVERNMENT

EDICT ± OF GOVERNMENT EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock

SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INDEPENDENT ENGINEERING LABORATORIES, INC. 1 2400 E. South Street Jackson, MI 49201 Ms. Jessica Stremich Phone: 517 788 6590 E-mail: IELaccounting@ielinc.com

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)

020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) 020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS Page 1.0 Scope 3 2.0 System Parameters 3 3.0 Service

More information

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2018 Certificate

More information

Sound-absorbing spacer Sorp10

Sound-absorbing spacer Sorp10 Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and

More information

European Fire Pump Listing

European Fire Pump Listing European Fire Pump Listing EN12259-12 Current Status of European Listings Germany - National Listings France - National Listings UK - National Listings Poland - National Listings Hungary - National Listings

More information

Decree of the Ministry of Transport and Communications

Decree of the Ministry of Transport and Communications 579/2000 Decree of the Ministry of Transport and Communications on transportable pressure equipment and tanks discharged or filled by pressure and used for the transport of dangerous goods Adopted in Helsinki,

More information