Institut za transport INTRA d.o.o. Podgorica Društvo za istraživanje i razvoj transporta i njihovih sredstava Kontrolno tijelo
|
|
|
- Liliana Marshall
- 5 years ago
- Views:
Transcription
1 Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem K A Annex to Accreditation Certificate - Accreditation Number K A Standard: MEST EN ISO/IEC :2013 Datum dodjele/ obnavljanja akreditacije: Date of granting/ renewal of accreditation / Akreditacija važi do: Accreditation is valid to: Akreditovano kontrolno tijelo tipa A Accredited Inspection Body type A Institut za transport INTRA d.o.o. Podgorica Društvo za istraživanje i razvoj transporta i njihovih sredstava Kontrolno tijelo Područje akreditacije / The scope of accreditation Kontrolisanje ispravnosti ugradnje uređaja i opreme za pogon motornih vozila na tečni-naftni gas, Uzorkovanje i kontrola tečnih goriva naftnog porijekla i ocjenjivanje usaglašenosti kvaliteta Inspection of accuracy fitting device and equipment for power unit motor vecihle on liquidoil gas, Sampling and Control of liquid fuels of petroleum origin and conformity assessment Quality ATCG Q izdanje /izmjena 1/3 Datum: Strana: 1/6
2 Detaljan obim akreditacije/ Detailed scope of accreditation Institut za transport INTRA d.o.o. Podgorica Društvo za istraživanje i razvoj transporta i njihovih sredstava, Kontrolno tijelo, Nikšićki put 20, Podgorica * Metoda kontrolisanja se sprovodi na terenu ** Metoda kontrolisanja se sprovodi u Kontrolnom tijelu i na terenu 1 Uređaji i oprema za pogon vozila na tečni naftni gas (TNG) Vizuelno Visual Inspection Kontrolisanje kompletnosti Pravilnik o tehničkim zahtjevima i drugim uslovima za uređaje i opremu za pogon motornih vozila na TNG ili prirodni gas (Sl.list Crne Gore 23/13) PR.KO Procedura za sprovođenje procesa kontrolisanja uređaja i opreme za pogon vozila na TNG i prirodni gas ( izdanje 08 od ) Completeness Inspection UP.KO Uputstvo za rad na pregledu vozila koja za pogon koriste TNG ( izdanje 04 od ) Instruments and Equipment for Motor Vehicles on Liquid-Oil Gas Dimenziona kontrola Dimensional Inspection Kontrola nepropusnosti spojeva Inspection of impervious joint Regulation on Tehnical Requirements and other conditions for devices and equipment for motor vehicles using liquid petroleum gas (Official Gazette Montenegro. 23/13) PR.KO The procedure for implementing process conntrol devicesand equipment for vehicles powered by LPG and natural gas(edition 08 of ) UP.KO Instrukcions for work on the review of the vehicles that are powered by LPG (edition 04 of ) ATCG Q izdanje /izmjena 1/3 Datum: Strana: 2/6
3 2 Proizvodi od nafte (tečna goriva naftnog porijekla) Dizel gorivo D 0.1 Ulje za loženje ekstra lakoel Motorni benzini Eurosuper 95 Motorni benzin Eurosuper 98 Tečni naftni gas - TNG Uzorkovanje Automatsko Sampling Automatic MEST EN ISO 3171 : 2014 Tečni naftni proizvodi - Automatsko uzimanje uzoraka MEST EN : 2013 Goriva za motorna vozila Ocjenjivanje kvaliteta benzina i dizel gorivauzimanje uzoraka goriva iz pumpnih automata na benzinskim stanicama i komercijalnim stanicama MEST EN ISO 3171 : 2014 Petroleum liquids Automatic pipeline sampling Petroleum products (liquid fuels of petroleum origin) Diesel Fuel D 0.1 Heating oil extra light Motor gasoline Eurosuper 95 Motor gasoline Eurosuper 98 Liquefied petroleum gas LPG Uzorkovanje Ručno MEST EN : 2013 Automotive fuels Assessment of petrol and diesel fuel quality Sampling from retail site pumps and commercial site fuel dispensers MEST EN ISO 3170 : 2010 Tečni naftni proizvodi Ručno uzimanje uzoraka Sampling Manually MEST ISO 4257: 2011 Tečni naftni gasovi Metoda uzimanja uzoraka MEST EN ISO 3170 : 2010 Petroleum liquids Manual sampling MEST ISO 4257: 2011 Liquefied petroleum gases Method of sampling ATCG Q izdanje /izmjena 1/3 Datum: Strana: 3/6
4 Proizvodi od nafte (tečna goriva naftnog porijekla) Dizel gorivo D 0.1 Ulje za loženje ekstra lakoel Motorni benzini Eurosuper 95 Motorni benzin Eurosuper 98 Tečni naftni gas - TNG Uzorkovanje Automatsko Ručno PR.KO Procedura za rukovanje, dostavu, skladištenje i čuvanje uzoraka (izdanje 02 od ) UP.KO Uputstvo za uzimanje uzoraka tečnih goriva naftnog porijekla dizela, motornog benzina i lož ulja ekstra lakog (izdanje 01 od ) Petroleum products (liquid fuels of petroleum origin) Diesel Fuel D 0.1 Heating oil extra light Motor gasoline Eurosuper 95 Motor gasoline Eurosuper 98 Liquefied petroleum gas - LPG Sampling Automatic Manually UP.KO Uputstvo za uzimanje uzoraka tečnih naftnog gasa TNG ( izdanje 01 od ) PR.KO Procedure for handling, shiping and storage of samples (edition 02 of ) UP.KO Instrukcions for taking samples of liquid fuels of oil origin, of diesel, petrol and heating oil exstra light (edition 01 of ) UP.KO Instrukcions for taking samples of liquefied petroleum gas LPG (edition 01 of ) MEST EN 590:2014/Cor.1:2015 Goriva za motorna vozila- Dizel gorivo- Zahtjevi i metode ispitivanja MEST EN 590:2014/Cor.1:2015 Automotive fuels- Diesel- Requirements and test methods ATCG Q izdanje /izmjena 1/3 Datum: Strana: 4/6
5 Dizel gorivo D 0.1 Diesel Fuel D 0.1 Pravilnik o kvalitetu i kontroli kvaliteta tečnih goriva naftnog porijekla (Sl.list Crne Gore 01/16) ( Prilog 1) Regulation on the quality and control of the quality fuels of liquid fuels of petroleum origin (Official Gazette Montenegro. 01/16) (Annexes 1) Motorni benzini Eurosuper 95 Motor gasoline Eurosuper 95 Motorni benzin Eurosuper 98 Motor gasoline Eurosuper 98 MEST EN 228 : 2013 Goriva za motorna vozila- Bezolovni benzin - Zahtjevi i metode ispitivanja MEST EN 228 : 2013 Automotive fuels -Unleaded petrol - Requirements and test methods Tečni naftni gas TNG Liquefied petroleum gas - LPG MEST EN 589: 2013 Goriva za motorna vozila- LPG - Zahtjevi i metode ispitivanja MEST EN 589: 2013 Automotive fuels- LPG - Requirements and test methods ATCG Q izdanje /izmjena 1/3 Datum: Strana: 5/6
6 Ulje za loženje ekstra lakoel Heating oil extra light Pravilnik o kvalitetu i kontroli kvaliteta tečnih goriva naftnog porijekla (Sl.list Crne Gore 01/16) (Prilog 2) Regulations on the quality and control of the quality fuels of liquid fuels of petroleum origin (Official Gazette Montenegro. 01/16) (Annexes 2) Ovаj obim vаži sаmo uz Sertifikаt o аkreditаciji sа аkreditаcionim brojem K A od This Scope of accreditation is valid only with accreditation certificate K A issued on Direktor ATCG Ranko Nikolić ATCG Q izdanje /izmjena 1/3 Datum: Strana: 6/6
Institut za transport INTRA d.o.o. Podgorica Kontrolno tijelo Nikšićki put 20, Podgorica
Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem K A 08.01 Annex to Accreditation Certificate - Accreditation Number K A 08.01 Standard: MEST EN ISO/IEC 17020 :2013 Datum dodjele/ obnavljanja
Privredno društvo za tehničko ispitivanje i analizu "Jugoinspekt Control" d.o.o. Bar Laboratorija
Dodatak Sertifikatu o akreditaciji - identifikacioni broj: ATCG-0049 Annex to Accreditation Certificate-Identification Number:ATCG-0049 Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem Li 16.23
ADRIAINSPEKT d.o.o. Poslovnica za naftu i naftne proizvode Department for oil and oil products Ciottina 17b, HR Rijeka
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref. : 383-02/09-75/19 Urbroj/Id. : 569-04/2-09-50 Datum izdanja priloga /Annex Issued on: 2009-10-30 Norma: HRN EN ISO/IEC
ABG TEST d.o.o. Podgorica Laboratorija za ispitivanje asfalta, betona i geomehanike Ul Zetskih Vladara bb Podgorica
Dodatak Sertifikatu o akreditaciji broj: Li 08.04 Annex to Accreditation Certificate : Li 08.04 Standard: ISO/IEC 17025 :2011 Datum dodjele/ obnavljanja akreditacije: Date of granting/ renewal of accreditation:.
ABG TEST d.o.o. Podgorica Laboratorija za ispitivanje asfalta, betona i geomehanike Ul. Zetskih Vladara bb Podgorica
Dodatak Sertifikatu o akreditaciji sa akreditacionim brojem Li 08.04 Annex to Accreditation Certificate - Accreditation Li 08.04 Standard: ISO/IEC 17025 :2011 Datum dodjele/ obnavljanja akreditacije: Date
Institut za transport INTRA d.o.o. Podgorica Laboratorija za ispitivanje Nikšićki put br. 20, Podgorica
Dodatak Sertfkatu o akredtacj - dentfkacon broj: ATCG-0033 Replaces Annex dated: 26.10.2015. Dodatak Sertfkatu o akredtacj sa akredtaconm brojem L 09.06 Annex to Accredtaton Certfcate - Accredtaton Number
VELEPRODAJNI CENOVNIK ''NISOTEC"
VELEPRODAJNI CENOVNIK ''NISOTEC" ŠIFRA SAP NAZIV BAR KOD PAK. JM 1.1 Motorna ulja za putnička vozila 21436 NISOTEC AUTOLINE PS SAE 10W-40 8600142193541 1 lit KOM 295,00 21437 NISOTEC AUTOLINE PS SAE 10W-40
DEPARTMENT OF TRADE AND INDUSTRY NO APRIL 2016
Trade and Industry, Department of/ Handel en Nywerheid, Departement van 438 National Regulator for Compulsory Specifications Act (5/2008): Amendments to the Compulsory Specification for Earth Leakage Protection
Annex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : Keresteciler Sitesi E Blok No:5 Kat:2 Ostim / Yenimahalle 06170 ANKARA/TÜRKİYE Phone : +90 312 385 95 30 Fax : +90 312 386 00
NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (ACT 5 OF 2008) AS AMENDED THROUGH THE LEGAL METROLOGY ACT (ACT 9 OF 2014)
284 No. 41473 GOVERNMENT GAZETTE, 2 MARCH 2018 N0.173 DEPARTMENT OF TRADE AND INDUSTRY 02 MARCH 2018 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (ACT 5 OF 2008) AS AMENDED THROUGH THE LEGAL METROLOGY
LIQUEFIED PETROLEUM GAS AS AUTOMOTIVE FUEL IN ENVIRONMENTAL PROTECTION
NADA STRUMBERGER, D. Sc. Fakultet prometnih znanosti Zagreb, Vukeliceva 4 RENATA BRADVICA, B. A Druga osnovna skola Vukovar SASA VIAKIC, B. Eng. Autoskola "Zadar", Zadar Traffic Safety and Ecology Review
OPTIMALNO UVOĐENJE ČISTIH GORIVA U HRVATSKOJ
M. Jednačak Uvođenje čistih goriva... Miroslav Jednačak ISSN 0350-350X GOMABN 43, 6, 317-330 Stručni rad / Professional Paper UDK 351.777 (4) : 614.7 : 665.6.013.5.001.6.001.26.001.23 : 340.134 : 336.57
Irving Oil Whitegate Refinery Limited
Irving Oil Whitegate Refinery Limited Whitegate, Midleton, Co. Cork Testing Laboratory Registration number: 258T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the
PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL
Kenya Bureau of Standards PETROLEUM PRODUCTS INSPECTION OPERATIONS MANUAL 2016-01-14 Version 2.0 Page 1 1.0 INTRODUCTION 1.1 Purpose and Background This manual provides a frame work for inspection of petroleum
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 18438 02 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.03.2014 to 10.03.2019 Holder of certificate: Jürgen
BERMUDA STATUTORY INSTRUMENT BR 54/1988 LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND TRANSPORT) REGULATIONS 1988
Laws of Bermuda Title 20 Item 2(e) BERMUDA STATUTORY INSTRUMENT BR 54/1988 LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, [made under section 3(1) of the Building Authority Act 1962 [title 20 item 2] and
Fuel quality improvements in the Republic of Serbia
Republic of Serbia Ministry of Agriculture and Environmental Protection Fuel quality improvements in the Republic of Serbia Jasmina Bogdanovic, Air and Ozone Layer Protection Unit Environment and the fuel
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23806-3 SOUTH AFRICAN NATIONAL STANDARD The handling, storage, distribution and maintenance of liquefied petroleum gas in domestic, commercial and industrial installations Part 4: The transportation
Crna Gora Cjenovnik 1. SEPTEMBAR
Crna Gora Cjenovnik 1. SEPTEMBAR 2015. WWW.MAZDA.CO.ME Mazda2 (5 vrata) Mazda2 G75 Emotion 55 / 75 5 brzina 11.390 Mazda2 G75 Challenge 55 / 75 5 brzina 11.890 Mazda2 G90 Challenge 66 / 90 5 brzina 12.390
30-Aug-11. VCA job number: CSM Date: 30 August Dear Sirs,
VCA job number: CSM241075 Date: 30 August 2011 Dear Sirs, 1. The vehicle type / component described on the attached approval(s) has been tested and meets the requirements of the ECE Regulation / EEC Directive
E/ECE/324/Rev.2/Add.114/Rev.1 E/ECE/TRANS/505/Rev.2/Add.114/Rev.1
21 August 2013 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions for
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-19459-8 SOUTH AFRICAN NATIONAL STANDARD Verification standards for the verification of volume-measuring instruments, including commercial standards of volume Published by Standards South
Carl Stuart Ltd. Tallaght Business Park, Whitestown, Dublin 24. Calibration Laboratory Registration number: 270C
Tallaght Business Park, Whitestown, Dublin 24 Calibration Laboratory Registration number: 270C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule bearing
Ru~ne pumpe Hand pumps KLIPNE, VISOKOG PRITISKA, ZA OP[TE I POSEBNE NAMENE PISTON PUMP, HIGH PRESSURE, FOR GENERAL AND SPECIAL PURPOSE
HYDRULICS umpe umps Ru~ne pumpe Hand pumps KLINE, VISOKOG RIISK, Z O[E I OSEBNE NENE ISON U, HIGH RESSURE, FOR GENERL ND SECIL UROSE Ru~ne pumpe se primenjuju u raznim sistemima naj~e{}e kao ure aji za
Hellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION
Hellenic Accreditation System Annex F2/17 to the Certificate No. 263-5 SCOPE of ACCREDITATION of the Testing & Calibration Laboratory of LINK LAB LTD for the performance of calibrations Measurand / Spectrophotometric
Crna Gora Cjenovnik. 15. JANUAR
Crna Gora Cjenovnik 15. JANUAR 2017. www.mazda.co.me Mazda2 (5 vrata) Mazda2 G75 Emotion 55 / 75 5 brzina 11.590 Mazda2 G75 Challenge 55 / 75 5 brzina 12.090 Mazda2 G75 TAKUMI 55 / 75 5 brzina 13.590 Mazda2
PTV TECHNICAL PRESCRIPTIONS. ELASTOMERIC SEALS: Part 1: Vulcanized Rubber FOR. Impartial institute for the monitoring of construction products
PTV 8681-1 TECHNICAL PRESCRIPTIONS TECHNICAL PRESCRIPTIONS FOR ELASTOMERIC SEALS: Part 1: Vulcanized Rubber COPRO vzw Version 1.0 dated 2017-10-17 Impartial institute for the monitoring of construction
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16861 First edition 2015-05-15 Petroleum products Fuels (class F) Specifications of dimethyl ether (DME) Produits pétroliers Combustibles (classe F) Spécifications du diméthyléther
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that has been assessed by ANAB and meets the requirements
Annex of the Certificate (Page 1/5) Scope of Accreditation
Annex of the Certificate (Page 1/5) As a "Type A" Inspection Body Address : Esas Maltepe Ofispark Altayçeşme Mah. Çamlı Sokak No:21 Kat:8 Maltepe 34843 İSTANBUL/TÜRKİYE Phone : +90 216 518 40 50 Fax :
For the National Voluntary Laboratory Accreditation Program
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Florida Department of Agriculture Metrology Laboratory 3125 Conner Blvd. Lab #2 Tallahassee, FL 32399-1650 Ms. Amy Smith Phone: 850-921-1570 Fax: 850-921-1593
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17579-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.07.2017 to 06.07.2022 Holder of certificate: gammatest
11-Feb-14. VCA job number: CSP Date: 11 February Dear Sirs,
VCA job number: CSP286503 Date: 11 February 2014 Dear Sirs, 1. The vehicle type / component described on the attached approval(s) has been tested and meets the requirements of the ECE Regulation / EEC
Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan
Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan The scope of accreditation is in accordance with the standard specifications outlined in the following page(s) of this document.
Reproduced by Sabinet Online in terms of Government Printer s Copyright Authority No dated 02 February 1998
STAATSKOERANT, 1 JUNIE 2012 No. 35410 3 CORRECTION NOTICE Government Gazette (Extra-Ordinary) No. 34393 of 30 May 2012, is hereby withdrawn and replaced with the following: GOVERNMENT NOTICE DEPARTMENT
Accreditation No: LAB 026. Attock Refinery Limited, Rawalpindi, Pakistan.
Issue : 10/08/15 Accreditation No: Awarded to Attock Refinery Limited, Rawalpindi, Pakistan. The scope of accreditation is in accordance with the standard specifications outlined in the following page(s)
Kondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001)
SVENSK STANDARD SS-EN ISO 4257 Fastställd 2001-09-14 Utgåva 2 Kondenserade petroleumgaser Metod för provtagning (ISO 4257:2001) Liquefied petroleum gases Method of sampling (ISO 4257:2001) ICS 75.160.30
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA IST RELIABILITY SEVICES INC. No. 22 Puding Rd., East Dist. Hsinchu City 300, Taiwan, R.O.C. Phone: 886 3 579 5766 ext 7100 Mr. General Lee general.lee@dekra-ist.com
EUROPEAN EXPERIENCE REGARDING FUEL AND BIOFUEL REGULATION
Ilona Vári ISSN 0350-350X GOMABN 52, 1, 53-59 Izlaganje sa skupa / Conference paper EUROPEAN EXPERIENCE REGARDING FUEL AND BIOFUEL REGULATION Abstract Transport fuels quality and movement is regulated
RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references. 18 January RSB reference code: RSB-DOC
RSB ROUNDTABLE ON SUSTAINABLE BIOMATERIALS RSB List of Documents and references 18 January 2019 RSB reference code: RSB-DOC-10-001 Published by the Roundtable on Sustainable Biomaterials. This publication
RSB List of Documents and references
Type of document: Reference Document Date: 20 March 2017 RSB List of Documents and references RSB reference code: [RSB-DOC-10-001] Published by the Roundtable on Sustainable Biomaterials. This publication
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Energy Assurance, LLC 5202 Belle Wood Court,
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL18398-02-01 according to DIN EN ISO/IEC 17025:2005 Period of validity: 26.02.2018 to 25.02.2023 Holder of certificate: SAL
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11057-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 20.06.2014 to 19.06.2019 Holder of certificate: OELCHECK
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH German Accreditation Body Annex to the Accreditation Certificate D-PL-20591-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 14.08.2017 to 13.08.2022
THE ENERGY EFFICIENCY ACT. Regulations made by the Minister under section 23 of the Energy Efficiency Act
Government Notice No... of 2016 THE ENERGY EFFICIENCY ACT Regulations made by the Minister under section 23 of the Energy Efficiency Act 1. These regulations may be cited as the Energy Efficiency (Labelling
MEASUREMENTS OF SHOCK WAVE FORCE IN SHOCK TUBE WITH INDIRECT METHODS
Rudarsko-geološko-naftni zbornik Vol. 17 str. 55-60 Zagreb, 2005. UDC 622.235.41 Original scientific paper Originalni znanstveni rad Language/Jezik: English/Engleski MEASUREMENTS OF SHOCK WAVE FORCE IN
Europass Curriculum Vitae
Europass Curriculum Vitae Personal information First name(s) / Surname(s) Danilo Nikolic Address(es) (Home) Dzordza Vasingtona 5, Podgorica, Montenegro (Business) Dobrota 36, Kotor, Montenegro Telephone(s)
CertRom. BUCHAREST, S5 Calea 13 Septembrie 231A; Ph: , Fax: ;
Promoting use of biofuels and bioliquids in Romania - the legal framework - Ministry of Economy and Trade and of Business Environment The 2003/30/CE Directive has been transposed into Government Decision
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY SERVICES, PETROTRIN Southern Main Road Pointe-A-Pierre, Trinidad, Trinidad & Tobago Peter Bhim Phone: 868 658 4200 CHEMICAL Valid To: November 30,
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 30.09.2016 to 08.12.2018 Holder of certificate: k3works
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17435-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.12.2017 to 08.12.2018 Holder of certificate: k3works
Small craft Electric propulsion system
INTERNATIONAL STANDARD ISO 16315 First edition 2016-03-15 Small craft Electric propulsion system Petits navires Système de propulsion électrique Reference number ISO 16315:2016(E) ISO 2016 ISO 16315:2016(E)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 YANFENG GLOBAL AUTOMOTIVE INTERIOR SYSTEMS CO., LTD. AUTOMOTIVE TRIM & ELECTRONICS TESTING LABORATORY. China Technical Center No. 1001 North Qinzhou Rd. Shanghai,
Certificate of constancy of performance
0402-CPR-SC0221-16 In compliance with Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 (the Construction s Regulation or CPR), this certificate applies to the construction
THE UNITED KINGDOM TYPE APPROVAL AUTHORITY
THE UNITED KINGDOM TYPE APPROVAL AUTHORITY Dear Sir / Madam. Date: 19 January 2015 1. The vehicle component / type described on the attached approval(s) has been tested and meets the requirements of the
BERMUDA LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND TRANSPORT) REGULATIONS 1988 BR 54 / 1988
QUO FA T A F U E R N T BERMUDA LIQUEFIED PETROLEUM GASES (HANDLING, STORAGE, SUPPLY AND BR 54 / 1988 [made under section 3(1) of the Building Authority Act 1962 and brought into operation on 27 July 1988]
Engine conversions to LPG or CNG are expensive and complex. The solution is InjectoReducer
Engine conversions to LPG or CNG are expensive and complex The solution is InjectoReducer Why use LPG or CNG? What is LPG Liquefied Petroleum Gas is a gas mostly propane and butane stored in a cylindrical
HYDROGEN REFUELLING STATIONS (HRS): RECENT AND CURRENT PERSPECTIVES
HYDROGEN REFUELLING STATIONS (HRS): RECENT AND CURRENT PERSPECTIVES HYLAW UK WORKSHOP CITY HALL 8 TH NOVEMBER 2018 NICK HART, ITM POWER PLC HRS: RECENT AND CURRENT PERSPECTIVES HYLAW UK WORKSHOP CITY HALL
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20847 First edition 2004-03-15 Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry Produits pétroliers Détermination
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1, 2, 3 CONTINENTAL AUTOMOTIVE SYSTEMS 2400 Executive Hills Blvd. Auburn Hills, MI 48326 Mr. David E. Swift Phone: 248 209 3813 Email: david.swift@continental-corporation.com
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CONTINENTAL AUTOMOTIVE SYSTEMS 570 Capital Drive Lake Zurich, IL 60047 Mr. Ken Klimek (Authorized Representative) Phone: 847-862-0131 Email: ken.klimek@continental-corporation.com
GB / ISO :2011
Translated English of Chinese Standard: GB10827.1-2014 www.chinesestandard.net Sales@ChineseStandard.net ICS 53.060 J 83 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB / ISO 3691-1:2011 Replacing
THERMAL SHOCK TEST REPORT
Report No. :DH1509300024A Version:A THERMAL SHOCK TEST REPORT Company :FLIP CHIP OPTO. INC. Address :No.185, Kewang Rd., Longtan Dist., Taoyuan City 325, Taiwan (R.O.C.) Model Name :Apollo 600-B Lot Number
Type: Office work chair Lab.no.: Depth: 650 mm Width: 710 mm Height: 1345 mm Weight: 18,8 kg. EN :2009 and EN :2009.
Lanab Design Aktiebolag Attn.: Åke Jansson Lerbacksgatan 7 SE-571 38 NÄSSJÖ Order no. 515628 Appendices 3 Initials laha/prni/hbs Report Material: Model: LD6340/LD6240 Type: Office work chair Lab.no.: 515628-2
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 20281 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 31.08.2016 to 30.08.2021 Holder of certificate: Deutsche
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SOUTHWEST RESEARCH INSTITUTE Office of Automotive Engineering Fuels and Lubricants Research Division and the Engine, Emissions and Vehicle Research Division
Contact person Date Reference Page Michael Lindblad F000833F 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-06-25 5F000833F 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Martela AB
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
TESTING LABORATORY FOR CIVIL ENGINEERING MATERIALS
TESTING LABORATORY FOR CIVIL ENGINEERING MATERIALS INSTITUTE FOR REASEARCH OF CIVIL ENGINEERING MATERIALS, STONE- AND CONCRETE CONSTRUCTION AND FIRE INTEGRITY MPA BRAUNSCHWEIG Inspection report nr (3329/2706)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LABORATORY & ON-STREAM ANALYSER DIVISION, SAUDI ARAMCO TOTAL REFINING AND PETROCHEMICAL COMPANY LAB & OSA Division Saudi Aramco Total Refining and Petrochemical
Contact person Date Reference Page Michael Lindblad F013838C 1 (1) Sustainable Built Environment
issued by an Accredited Testing Laboratory Contact person Michael Lindblad 2015-09-17 5F013838C 1 (1) Sustainable Built Environment +46 10 516 58 58 Michael.Lindblad@sp.se 1002 ISO/IEC 17025 Johanson Design
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2016 Certificate
ISO epoint.edu.vn ISO page 1 / 5
page 1 / 5 page 2 / 5 iso 33000 pdf 3.11 2007/1 Page 1-4 ISO Trapezoidal screw threads Tr WWW.F-M-S.DK NOMINAL PITCH DIAMETER d 2 & D 2 d 2 /D 2 = d/d PDn (PDn = 0.5P) EXTERNAL THREAD d = major diameter
SOUTH AFRICAN NATIONAL STANDARD
ICS 23.020.10; 75.200 ISBN 0-626-15187-2 SOUTH AFRICAN NATIONAL STANDARD Above-ground storage tanks for petroleum products Published by Standards South Africa 1 dr lategan road groenkloof! private bag
FY2018 Greenhouse Gas Inventory Report
FY2018 Greenhouse Gas Inventory Report Introduction This document is the annual greenhouse gas (GHG) emissions inventory report for the Air New Zealand group of companies for the period 1 July 2017 to
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16924 First edition 2016-12-01 Natural gas fuelling stations LNG stations for fuelling vehicles Stations-service de gaz naturel Stations GNL pour le ravitaillement de véhicules
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 METTLER TOLEDO (INDUSTRIAL) 1900 Polaris Parkway Columbus, OH 43240 Frank Gardone Phone: 412 213 2263 CALIBRATION Valid To: April 30,
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12156-1 Third edition 2016-02-01 Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method Carburant diesel Évaluation du pouvoir
EDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
Sound-absorbing spacer Sorp10
Sponsor: Reference number: 7.3 / 27080 This document is only a translated version; not legally attested Max Frank GmbH & Co. KG Mitterweg 1 94339 Leiblfing Federal Institute for Materials Research and
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
European Fire Pump Listing
European Fire Pump Listing EN12259-12 Current Status of European Listings Germany - National Listings France - National Listings UK - National Listings Poland - National Listings Hungary - National Listings
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NATIONAL EXPOSURE TESTING, INC. 3211 Centennial Road Sylvania, OH 43560 Christa Lammers Phone: 419 841 1065 MECHANICAL Valid To: October 31, 2018 Certificate
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
Designed for you. Engineered for the world.
WAYNE HELIX ALTERNATIVE ENERGY SOLUTIONS Designed for you. Engineered for the world. Wayne.com Prepare your forecourt for the eco invasion Hybrid vehicles using LPG (Liquefied Petroleum Gas), ethanol,
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11065-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 08.02.2016 to 07.02.2021 Holder of certificate: Actemium
Economic and Social Council
United Nations Economic and Social Council ECE/TRANS/GRPE/2013/xx Distr.: General Date Original: English Economic Commission for Europe Inland Transport Committee World Forum for Harmonization of Vehicle
Decree of the Ministry of Transport and Communications
579/2000 Decree of the Ministry of Transport and Communications on transportable pressure equipment and tanks discharged or filled by pressure and used for the transport of dangerous goods Adopted in Helsinki,
2 No GOVERNMENT GAZETTE, 30 MAY 2012 IMPORTANT NOTICE The Government Printing Works will not be held responsible for faxed documents not receive
Regulation Gazette No. 9767 Regulasiekoerant Vol. 563 Pretoria, 30 May 2012 Mel No. 35393 2 No.35393 GOVERNMENT GAZETTE, 30 MAY 2012 IMPORTANT NOTICE The Government Printing Works will not be held responsible
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038
DEUTSCHE NORM July 2004 DIN EN ISO 9038 { ICS 13.220.40; 87.040 Test for sustained combustibility of liquids (ISO 9038 : 2002) English version of DIN EN ISO 9038 Prüfung der Weiterbrennbarkeit von Flüssigkeiten
TECHNICAL SPECIFICATIONS FOR STEEL PLATES
TECHNICAL SPECIFICATIONS FOR STEEL PLATES 1.0 SCOPE: HINDUSTAN PETROLEUM CORPORATION LTD., GRESHAM HOUSE This specification covers requirement for Carbon Steel Plates of Structural Quality as per IS: 2062
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
Certification Scheme
Certification Scheme Barbecues burning solid fuels in accordance with DIN EN 1860-1 (Edition: August 2015) DIN CERTCO Alboinstrasse 56 12103 Berlin Tel.: +49 30 7562-1131 Fax: +49 30 7562-1141 E-mail:
CERTIFICATE. EN tested QAL 1 certified TUV approved Annual inspection. The certificate is valid until: 19 July Köln, 17 August 2012
:~ ~~~~~============~----------------------~ Umwelt Bundes Amt @ For our Environment A TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000035014 Certified
Thai Experience on Energy Taxation
The 5 th IMF-Japan High-Level Tax Conference for Asian Countries Thai Experience on Energy Taxation Dr. Warotai Kosolpisitkul Director of Tax Policy Bureau Fiscal Policy Office, Ministry of Finance 21
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BUREAU VERITAS CONSUMER PRODUCTS SERVICES MEXICO, S.A. DE C.V.-PUEBLA 1 Circuito del Sol 3905-01 Colonia Nuevo Amanecer Puebla, Puebla 72400, Mexico Alicia