Overview of Profi le Dampers TR/TR-L
|
|
- Sheryl Horn
- 6 years ago
- Views:
Transcription
1 TUBUS-Series Overview of Profi le Dampers Physical Properties of TUBUS Profile Dampers Energy Capacity per unit weight Operating Lifetime PUR Rubber Gummi TUBUS Energy Capacity per unit volume ACE TUBUS profile dampers are high performance damping elements made from a special Co-Polyester Elastomer.They have a high energy absorbing capacity compared with other materials. The TUBUS-series comprises main types with over individual models. The excellent damping characteristics are achieved as a result of the special elastomer material and the worldwide patented construction design. This enables us to change the characteristics of the elastomer material so that individual and distinct damping curves are possible. TUBUS dampers offer a considerable performance advantage when compared to other materials such as rubber, urethanes (PUR) and steel springs. A further advantage compared to other damping elements is the operating life expectancy up to twenty times longer than with urethane dampers, up to ten times longer than with rubber dampers and up to five times longer than with steel spring dampers. Force Comparison of Damping Characteristics TA TS TR/TR-L Stroke The innovative TUBUS dampers absorb energy while exhibiting the following damping characteristics: Model type TA: Degressive characteristic with max. energy absorption (coloured area) with min. stroke. Energy absorption: % to %. Model type TS: Almost linear characteristic with low reaction force over a short operating stroke. Energy absorption: % to %. Model type TR/TR-L: Progressive characteristic with gradually increasing reaction force over a long stroke. Energy absorption TR: 17 % to 3 % Energy absorption TR-L: 1 % to % Characteristics of dynamic energy absorption for impact velocity over. m/s. For impact velocities under. m/s, please request a static characteristic curve. The material does not absorb water or swell and it is highly resistant to abrasion. Products of the TUBUS-series will work at temperatures of - up to 9 and are resistant to grease, oil, petroleum fluids, microbe and chemical attack and sea water. They also have good UV and ozone resistance. The very long service life of up to one million cycles, the compact size and the low unit weight differentiate the TUBUS profile dampers from all other types of elastomer damping elements. If you are looking for an economic damping solution where the load does not need to be decelerated to an exact datum position and you do not need 1% absorption of the impact energy then TUBUS dampers are a real alternative to hydraulic end position damping. They are the preferred solution for end stop dampers in robotic systems, high bay warehouse systems and all similar automated plant and machinery. For the crane industry we manufacture special high capacity crane buffers that have an ideal deceleration characteristic with high return force for this type of application and energy capacities from to 1 7 Nm. This means you can have a TUBUS crane buffer capable of providing up to 9 kn of braking force in a package only weighing 3 kg and absorbing up to % of the energy. Special Damper Besides the standard product range of the TUBUS-series there are also a large number of special products available upon request for customer-specific applications. Issue 9.7 Specifications subject to change Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com
2 TUBUS-Series Application Examples ACE TUBUS profile dampers protect the integrated loading station on a new high speed machining centre. The ACE TUBUS damper is designed to prevent overrun on the high speed loading station of a Camshaft machining centre used in the automobile industry. In the event that the drive train fails during operation or incorrect data is inputted the ACE TUBUS damper absorbs the impact preventing costly damage to the machine. The TA-9- TUBUS damper impressed engineers with this exceptionally long service life in operation. When used as an emergency stop the TUBUS damper can absorb up to 3 % of the impact energy. Safe end position damping Safety with ultra high speed operation Issue 9.7 Specifications subject to change Safe reliable cycling ACE TUBUS profile dampers prevent impact problems between the different directions of motion on a weigh feeder. The illustrated weigh feeder is a critical production component and must always function correctly. A previous history of machine damage caused by the crossing of different motions in operation was eliminated by the use of TUBUS type TA -1 profile dampers. Due to the copolyester construction of TUBUS dampers a degressive damping curve could be engineered to suit the application. The combination of superior damage protection, small size and economic cost made the TUBUS damper the ideal solution for this critical application. 7 Consistent, safe operation of a weigh feeder Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com 7
3 Rotary Dampers ACE rotary dampers are sealed maintenance free units. They are available with fixed or adjustable damping rates. The damping can be clockwise, anticlockwise or in both directions. The outer body is either or metal depending upon model size. The output connection can be direct onto the keyed output shaft or indirect via a gear (available with standard modules). Plastic racks with modules of. to 1 are also available. Applications include office machinery, lids and flaps, floppy disc drives, piano lids, CD players, auto glove-boxes, vending machines, medical equipment, furniture industry and a multitude of other uses. Keyed Output Shaft Damping Vane Damping Orifice Pressure Chamber Outer Body Function: ACE rotary dampers guarantee the smooth controlled opening and closing of small lids, covers and flaps. They can be mounted directly on the pivot axis or can be used to provide linear damping by using a gear and rack. They enable mechanisms to operate with a smooth controlled motion giving that touch of quality to whatever product they are used on. ACE rotary dampers are filled with a special high viscosity fluid (silicone type) and sealed for life. The fluid is passed through an orifice or groove by a rotating vane to provide damping resistance. The damping torque generated is determined by the fluid viscosity and by the orifice configuration. Note: With a max. rotational speed of revs/min and a maximum of 1 cycles/min (1 cycles/min with the FDT/ FDN types) the rotary dampers still provide more than % of their damping torque after a working life of cycles. Issue 9.7 Specifications subject to change
4 Rotary Dampers FRT-E and FRT-G FRT-E,,1, 1 +/-, +, Ø1 19 Ø 7, Damping in both Directions of Rotation Without Gear With Gear Damping Torque (Nominal. 3) FRT-E-1 FRT-E-1-G1.1 +/-. FRT-E- FRT-E--G1. +/-.7 FRT-E-3 FRT-E-3-G1.3 +/-. FRT-E- FRT-E--G1. +/-.1 Ø,1 Ø, +/-, 3 1, (,) Dims. in ( ) without gear Temperature range: to FRT-E (at 3 ), Tooth: Involute, Module: 1.,,3 Pressure angle:, No. of teeth: 1,1 P.C.D.: mm A mm long rack is available for use with this part see page 9.,7 3 1 FRT-E (at ),,,3,, FRT-G,1,, 19 +/-,, +, Ø1 Ø 3,7 Issue 9.7 Specifications subject to change Damping in both Directions of Rotation Ø,1 7 Without Gear With Gear Damping Torque (Nominal. 3 ) FRT-G- FRT-G--G1. +/-.7 FRT-G-3 FRT-G-3-G1.3 +/-. FRT-G- FRT-G--G1. +/-.1 FRT-G- FRT-G--G1. +/-.1 FRT-G-11 FRT-G-11-G1 1. +/-. FRT-G (at 3 ) Temperature range: to Tooth: Involute 1, Module: 1. 1 Pressure angle:, No. of teeth: 1 P.C.D.: 7 mm A mm long rack is available for use with this part see page Ø 3, +/-, FRT-G (at ),, (,) Dims. in ( ) without gear 1, 1, 1,,,, Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com 9
5 Rotary Dampers FRT/FRN-C and -D FRT-C and FRN-C 1 3, +/-, Ø 1 7, Ø1, 3, Ø -, 1, 7 1, Bidirectional Damping FRT-C-1 FRN-C-R1 FRN-C-L1 without gear +/-. FRT-C-1-G1 FRN-C-R1-G1 FRN-C-L1-G1 with gear +/-. FRT-C-31 FRN-C-R31 FRN-C-L31 without gear 3 +/-. FRT-C-31-G1 FRN-C-R31-G1 FRN-C-L31-G1 with gear3 +/-. Model Damping Torque (Nominal. 3 ) Temperature range: to Tooth: Module: 1. Pressure angle: Involute No. of teeth: 11 P.C.D.:. mm FRT/N-C (at 3 ) A 17 mm long flexible rack and a mm long rigid rack are available for use with this part see page 9. FRT-D and FRN-D 31 1 FRT/N-C (at ) 3, 3, 1, 1, /-, Ø Ø1,7 Ø, R Ø -, Bidirectional Damping FRT-D-1 FRN-D-R1 FRN-D-L1 without gear 1 +/- FRT-D-1-G1 FRN-D-R1-G1 FRN-D-L1-G1 with gear1 +/- FRT-D-1 FRN-D-R1 FRN-D-L1 without gear 1 +/- 3 FRT-D-1-G1 FRN-D-R1-G1 FRN-D-L1-G1 with gear1 +/- 3 FRT-D-1 FRN-D-R1 FRN-D-L1 without gear +/- 1 FRT-D-1-G1 FRN-D-R1-G1 FRN-D-L1-G1 with gear +/- 1 Temperature range: to Tooth: Module: 11. Pressure angle: Involute No. of teeth: 1 P.C.D.: 1 mm FRT/N-D (at 3 ) Model FRT/N-D (at ) 1 1 Damping Torque (Nominal. 3 ) Issue 9.7 Specifications subject to change 1 A mm and mm long rack are available for use with this part see page 9. 9 Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com
6 Rotary Dampers FYN-P1 and FYN-N1 FYN-P1 Ø 17, Ø 1, Ø black white Damping Torque Return Damping Torque FYN-P1-R13 FYN-P1-L FYN-P1-R13 FYN-P1-L13 1 FYN-P1-R13 FYN-P1-L13 1 Schwenkwin Rotation 11 Temperature range: - to.1 kg Max. rotation angle: 11 Coloured shaft for identification of the damping direction! 1 FYN-N1 Ø1-, Ø Ø1-, white Endkappe end cap: weiß: left-hand linksdrehend damping dämpfend black end cap: right-hand schwarz: rechtsdrehend damping dämpfend Issue 9.7 Specifications subject to change 3 Damping Torque 1 1 Return Damping Torque FYN-N1-R13 FYN-N1-L13 1 FYN-N1-R3 FYN-N1-L3 FYN-N1-R3 FYN-N1-L3 FYN-N1-R33 FYN-N1-L33 3 With Ø 1 mm body on request. Temperature range: - to.1 kg Max. rotation angle: 11 Coloured end cap for identification of the damping direction! 1, -,1 -,1 Schwenkwin Rotation Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com 91
7 Rotary Dampers FYN-U1 and FYN-K1 FYN-U1 Ø 13 Ø 1 Ø Damping Torque Return Damping Torque FYN-U1-R3 FYN-U1-L3 FYN-U1-R3 FYN-U1-L3 FYN-U1-R33 FYN-U1-L33 3 Schwenkwink Rotation 11 Zinc diecast Temperature range: - to. kg Max. rotation angle: 11 1 FYN-K1 R 3, 9 Ø1 -, 7 3 Ø Ø1, Ø 3, Damping Torque FYN-K1-R FYN-K1-L Temperature range: - to Max. rotation angle: 1 Return damping torque: 1.3 kg 1 rechtsdrehend Right-Hand Damping dämpfend Endposition Position Left-Hand linksdrehend dämpfend Damping Issue 9.7 Specifications subject to change 1 9 Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com
8 Rotary Dampers FRT/FRN-K and -F and FFD FRT/FRN-K and FRT/FRN-F 7 3 Ø +/-, Ø13, 1 Ø, Ø R, -,1 -,3 1 9, 1, Bidirectional Damping Damping Torque (Nominal. 3 ) FRT-K- FRN-K-R FRN-K-L +/- 1 FRT-K-13 FRN-K-R13 FRN-K-L13 1 +/- FRT-F-3 FRN-F-R3 FRN-F-L3 +/- FRT-F /- FRT-F-3 +/- 1 Temperature range: to max..11 kg FRT-K and -F (at 3 ) FRT-K and -F (at ) FFD Ø 3, t = Thickness Breite D L L 1 D 1 d 1 d D 1 h 1 Flange Type H 1 h H Standard Type 93 Issue 9.7 Specifications subject to change ModelDamping Torque Nm Damping Option 1 Dimensions Flange Type Standard Type D1 D H1 h1 L1 L d1 d H h t FFD-.1 /. / 1. Type S FFD-.1 /. / 1. Type S FFD-3.1 /. / 1. / 1. Type S FFD- 1. / 1. /. Type W FFD- 1. / 1. /. Type W FFD-3 1. /. /. / 3. Type W Damping clockwise or anti-clockwise Temperature range: -1 to Rotational speed max.: Cycle rate max.: Recommended shaft details: 3 13 cycles per min. Ø Ordering Example FFD--FS-L-1 Friction Damper Body Ø Mounting Style (Flange = F, Standard = S) Damping Option (S or W) Damping Direction (right = R, left = L) Damping Torque see chart Damping Torque 1 = 1. Nm =. Nm 13 = 1. Nm 13 = 1. Nm 3 =. Nm 3 =. Nm 33 = 3. Nm Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com 93
9 Rotary Dampers FYT/FYN-H1 and -LA3 FYT-H1 and FYN-H1 1 Schwenkwinkel Rotation M 11 Einstellschraube Adjusting Screw Ø Ø Ø Max. Side Load P -,3 Keyed output shaft shown in mid-travel position Model Adjustable Bidirectional Damping FYT-H1 FYN-H1-R FYN-H1-L...1 Damping Torque Nm (adjustable) Zinc diecast, steel shaft Temperature range: - to Max. rotation angle: 1 Return damping torque:. Nm Maximum side load: N. kg A play of approx. can occur at the beginning of movement. FYT-LA3 and FYN-LA3 1 Schwenkwinkel Rotation 9 Adjusting Einstellschraube Screw Ø 3 Ø Ø 17 P 1,-, 7 9 Ø, Keyed output shaft shown in mid-travel position Model Adjustable Bidirectional Damping FYT-LA3 FYN-LA3-R FYN-LA3-L... Zinc diecast, steel shaft Temperature range: - to Max. rotation angle: 1 Return damping torque: Nm Maximum side load: N 1.7 kg Damping Torque Nm (adjustable) A play of approx. can occur at the beginning of movement. Issue 9.7 Specifications subject to change 9 Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com
10 Rotary Dampers FDT/FDN-7 to 7 FDT-7 to 7 R C -, -,1 Ø V -,1 B A Ø F Ø E C Recommended Drive Shaft Size Ø D G H Damping in both Directions of Rotation Model Damping Torque Nm Dimensions (at, 3 ) A B C D E F G H R V FDT-7. +/ FDT-7.7 +/ FDT-3.7 +/ FDT-7.7 +/ Steel. Output shaft sleeve: FDT (at 3 ) Nylon 1 Temperature range: -1 to Rotational speed max.: Cycle rate max.: 1 cycles per minute Weight max.:.11 kg There is no support for the output shaft within the damper structure. External support must be provided for the shaft Nm 1 3 FDT-7 FDT-3 FDT-7 FDT-7 FDT (at ) Nm FDT-7 FDT-3 FDT-7 FDT-7 FDN-7 to 7 R B A Ø F Ø E Issue 9.7 Specifications subject to change Ø D Ø C Damping Torque Nm Dimensions (at, 3 ) A B C D E F G H R FDN-7-R FDN-7-L. +/ FDN-7-R FDN-7-L. +/ FDN-3-R FDN-3-L. +/ FDN-7-R FDN-7-L 1. +/ Steel. Output shaft sleeve: Nylon Temperature range: -1 to Rotational speed max.: Cycle rate max.: 1 cycles per minute Weight max.:.1 kg There is no support for the output shaft within the damper structure. External support must be provided for the shaft. Recommended shaft details: for FDN-7 Ø G H for FDN-7 to FDN-7 Ø Hardness > HRC, surface smoothness R Z < 1 μm 9 Stoßdämpfer GmbH PO Box 11 D-7 Langenfeld Tel Fax info@acecontrols-int.com 9
TUBUS-Series Type TA
TUBUS-Series Type TA Profi le Damper Axial Damping 76 The profile damper type TA from the innovative ACE TUBUS series is a maintenance-free, self-contained damping element made from a special Co-Polyester
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester Elastomer.
More informationTUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping 84 The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester
More informationMechanical Rotary Dampers
Introduction Mechanical Our are sealed maintenance free units. They are available with fixed or adjustable damping rates. The damping can be clockwise, anticlockwise or in both directions. The outer body
More informationSmall dampers refine end product
4 Motion Control Small dampers refine end product ACE rotary dampers mainly provide an invisible yet valuable service as a maintenance-free machine element to allow controlled deceleration of rotary or
More informationANTI-VIBRATION Rotary Dampers - Continuous Rotation Bi-Directional : Ncm
FRTE Bi-Directional :.1 -. 2.1 2.5 2. 1 ±.5 2 ±.5 Ø Ø7.2 Ø2.5 ±.5 Ø2.1 (5.5 without gear) torque.7..5...2.1 FRTE2 (at 2 C) 2 Model 2 5 Rpm torque.5...2.1 FRTE2 (at 2 Rpm) 2 5 C Model 2 torque varies with
More informationAutomation Control Equipment. Main Catalogue. Edition 4/2009. New Models. New Models. Industrial Shock Absorbers. Safety Shock Absorbers
Automation Control Equipment Main Catalogue Edition 4/09 Industrial Shock Absorbers Safety Shock Absorbers TUBUS Profile Dampers New Models SLAB Damping Plates New Models Rotary Dampers Dampers/ Feed Controls
More informationMain Catalogue. Automation Control Equipment. New models. Edition 9/2004. Safety Shock Absorbers. TUBUS Bumpers. Rotary Dampers
Automation Control Equipment Main Catalogue Edition 9/04 Industrial Shock Absorbers New models Safety Shock Absorbers TUBUS Bumpers New models Rotary Dampers New models Dampers / Feed Controls New models
More informationElastomer Products for Energy Control
TUBUS Bumpers Elastomer Products for Energy Control Outperform Rubber, Urethane and Coiled Steel ACE Controls Inc. Innovation in Deceleration and Motion Control ISO 9001 Certified 01/09(R) Revised 12/10
More informationAutomation Control Equipment
Automation Control Equipment Main Catalogue Edition 9/07 Industrial Shock Absorbers Safety Shock Absorbers ew Models TUBUS Bumpers Rotary Dampers Dampers/ Feed Controls Industrial Gas Springs ew Models
More informationSafety Shock Absorbers SCS300 and 650
s SCS300 and 650 60 The safety shock absorber series SCS300 to 650 are based on the innovative technology of the SC² series by ACE. y combining the piston and inner tube, an energy capacity up to 525 m
More informationOperating Temperature. 32 to 122 F (0 to 50 C)
Rotary Dampers GENERAL INFORMATION ACE Controls Inc. offers a world class range of compact rotary dampers that enable products to function with a smooth mechanical motion, resulting in that touch of quality.
More informationAir-Oil Systems, Inc.
Rotary Dampers GENERAL INFORMATION ACE Controls Inc. offers a world class range of compact rotary dampers that enable products to function with a smooth mechanical motion, resulting in that touch of quality.
More informationClamp and Safety Systems
Clamp and Safety Systems Special Catalogue Edition 6.2008 Editorial Dear Customer, Dear Reader, You are probably wondering Why a new special catalogue when in the main ACE catalogue we offer all products
More informationMiniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
More informationAutomation Control Equipment. Main Catalogue. Edition 1/2013. New Models. New Models. New Models. Industrial Shock Absorbers. Safety Shock Absorbers
Automation Control Equipment Main Catalogue Edition 1/13 Industrial Shock Absorbers New Models Safety Shock Absorbers TUBUS Profile Dampers New Models SLAB Damping Plates Rotary Dampers Dampers/ Feed Controls
More informationAutomation Control Equipment. Main Catalogue. Edition 6/2011. New Models. New Models. New Models. New Models. New Models. New Models.
Automation Control Equipment Main Catalogue Edition 6/11 Industrial Shock Absorbers New Models Safety Shock Absorbers New Models LOCKED Clamping Elements TUBUS Profile Dampers New Models SLAB Damping Plates
More informationShock absorbers in miniature format Rod Button. Slot
8 Miniature Shock Absorbers MC5 to MC75 Miniature Shock Absorbers Shock absorbers in miniature format Rod Button Ideal for compact, effi cient designs: The MC5 to 75 series impresses users with their reduced
More informationLOCKED SERIES. Machine Failures. General Information. set up. maintenance. reconditioning. repair 30.4%
General Information LOCKED SERIES 2 Lowering machinery process costs is key in today s world. According to a recent study approximately a third of all machine stoppages result in unexpected damage and
More informationIndustrial shock absorbers
Industrial shock absorbers Safety shock absorbers Hydraulic speed controls General information Industrial shock absorbers, safety shock absorbers and hydraulic speed controls are used wherever masses have
More informationUltra-High Energy Absorption SC 25 to SC 650 Heavyweight Shock Absorbers. Featuring New SC 25, 75 & 190 Models Features...
Ultra-High Energy Absorption SC 5 to SC 650 Heavyweight Shock Absorbers Featuring New SC 5, 75 & 190 Models Features. Piston Tube Design for Long Cycle Life Stainless Steel Piston Rod Integral Mechanical
More informationMiniature Shock Absorbers
1 Automation Control Tuning for almost any design Miniature shock absorbers from ACE are tried-and-tested quality products used in millions of industrial construction designs throughout the world. They
More informationMiniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 1 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
More informationAutomation Control Equipment
Automation Control Equipment Main Catalog Edition 7/2014 Industrial Shock Absorbers New Models Safety Shock Absorbers TUBUS Profile Dampers New Models Dampers/ Feed Controls New Models Industrial Gas Springs
More informationITT Industrial Products
ITT Industrial Products Providing custom industrial solutions to meet customers application needs globally. ITT Control Technologies GmbH under the ITT Enidine brand provides quality energy absorption
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationIndustrial Gas Springs
Industrial Gas Springs Function, Calculation and Mounting Tips Gas springs are universally accepted, wherever you want to push pull lift lower, or position covers, lids or other components by hand without
More informationInnovation in. Mechanical Motion & Vibration Controls
Innovation in Mechanical Motion & Vibration Controls ACE Controls Inc. located in Farmington Hills, Michigan, is a leading innovator in deceleration, vibration and motion control technology. For over a
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationAutomation Control Equipment. Damping Technology. ACE: Your partner for industrial shock absorbers, hydraulic dampers and vibration control
Automation Control Equipment Damping Technology ACE: Your partner for industrial shock absorbers, hydraulic dampers and vibration control Extract from Main Catalogue 206 Complete Product Range Data Sheets
More informationHeavy Industrial Shock Absorbers
80 Automation ontrol Heavy Industrial Shock Absorbers ffective shock absorption for heavy loads The heavy industrial shock absorbers from A round off the top of the company s offers in damping technology.
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationIndustrial Gas Springs Pull Type
4 Motion Control Industrial Gas Springs Pull Type Takes over when things get too tight for gas pressure springs If ACE gas push type springs cannot be used due to a lack of space, ACE s industrial gas
More informationSafety Shock Absorbers
242 Safety Products s Perfect protection for the worst case scenario As a cheaper alternative to the standard shock absorber, Safety shock absorbers are the tried and tested low cost metrhod of preventing
More informationPrecision Drives Precision Gears Performance in Accuracy
Precision Gears Performance in Accuracy Your addition in transmission. The foundations were laid over 100 years ago: In the small mill belonging to the Stephan family in the 1890s, everything already
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationMiniature Shock Absorbers MC 5 to MC 75
Miniature Shock Absorbers MC 5 to MC 75 Self-Compensating ACE Miniature Shock Absorbers are self-contained hydraulic units. The MC 5 to MC 75 model range has a very short overall length and low return
More informationIf the windlass has a diameter of 300mm, calculate the torque produced by the load. (Show all working and units.)
8. A winch system used to raise a 5N load is shown. (a) If the windlass has a diameter of mm, calculate the torque produced by the load. (Show all working and units.) T = r = 5 5 = 875Nmm = 8. 75Nm substitution
More informationSNR, YOUR GUIDE TO LINEAR MODULES
SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has
More informationKTR Torque Limiters Overload Protection Systems
KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationRotary Indexing Table with Face Gear
FIBROTAKT Rotary Indexing Table with Face Gear Product No. 1.001.00.00.00.01000 1 7975 006 4 08/007 Contents FIBRO The latest technology with a tradition of service /3 FIBROTAKT at a glance 4 Technical
More informationEMC-HD. C 01_2 Subheadline_15pt/7.2mm
C Electromechanical 01_1 Headline_36pt/14.4mm Cylinder EMC-HD C 01_2 Subheadline_15pt/7.2mm 2 Elektromechanischer Zylinder EMC-HD Short product name Example: EMC 085 HD 1 System = ElectroMechanical Cylinder
More informationIndustrial Shock Absorbers MC33 to MC64
Industrial Shock Absorbers MC33 to MC64 Self-Compensating 36 This range of self-compensating shock absorbers is part of the innovative MAGUM Series from ACE. You profit from the enhanced product life in
More informationDNV-GL HH CE RoHS-II conform
Armour: Extremely bending- and torsion-stable aramid braid Armour: Extremely bending- and torsion-stable aramid wrapping Outer jacket: Pressure extruded PUR mixture Fibre: FOC-fibre made out of glass Subcable
More informationDICTATOR Final Dampers
DICTATOR DICTATOR final dampers are needed to slow down all kinds of rotative or linear movement. Their relatively long strokes offer sufficient saftey distances. The final dampers are available in both
More informationLONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
More informationLow wear on all shafts: The Marathon Runner iglidur W300
iglidur Low wear on all shafts: The Marathon Runner iglidur Over 400 sizes available from stock For especially long service life Low coefficient of friction Extremely high wear resistance Also suitable
More informationiglidur G The General Purpose Bearing: most popular iglidur material worldwide
Standards Wide Range from Stock polymer bearings G The General Purpose Bearing: most popular material worldwide from page 51 J The Fast and Slow Motion Specialist: used in long-life applications, also
More informationWorking in Energy. Ace Controls International Unit 404 Easter Park Haydock Lane Haydock WA11 9TH United Kingdom
Working in Energy Ace Controls International Unit 404 Easter Park Haydock Lane Haydock WA11 9TH United Kingdom Telephone: +44 (0)1942 727440 Facsimile: +44 (0)1942 717273 Email: info@ace-controls.co.uk
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationANTI VIBRATION MOUNTS
ANTI VIBRATION MOUNTS Insulators The insulators, because of their electrically insulating property, are used for the bearing of blasts, airconditioning units and fans. The fact that they can be anchored
More informationMiniature Ball Rail Systems
R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationMoments. It doesn t fall because of the presence of a counter balance weight on the right-hand side. The boom is therefore balanced.
Moments The crane in the image below looks unstable, as though it should topple over. There appears to be too much of the boom on the left-hand side of the tower. It doesn t fall because of the presence
More informationROTARY TABLES SERIE TC TECHNOLOGY THAT INSPIRES
ROTARY TABLES SERIE TC TECHNOLOGY THAT INSPIRES TC FIXED-STATION ROTARY INDEXING TABLES TC ROTARY INDEXING TABLE TC ROTARY INDEXING TABLE: RELIABILITY FOR A LIFETIME EXTENDED WARRANTY Using our rotary
More informationWDS INDUSTRIAL SHOCK ABSORBERS. & : * 1-a. Deceleration technologies: WDS
Benefits of using Industrial Shock Absorbers: Increased productivity through raised machine speeds, smoother operation and operator comfort. Smooth deceleration of moving parts leading to reduced wear,
More informationLinear Bushings and Shafts. The Drive & Control Company
Linear Bushings and s The Drive & Control Company 2 Bosch Rexroth Corp. Linear Motion and Assembly Technologies Linear Bushings R310A 3100 Linear Motion Technology Ball Rail Systems Standard Ball Rail
More informationShock Absorber Accessories M5 to M25
Shock Absorber Accessories M to M 34 Selection Chart for Shock Absorber Accessories 1 Clamp Mount/ Universal Mount 2 Side Load Adaptor Shock Absorber Type KM AH MB RF UM BV Thread Size Mx0. MCEUM KM AH
More informationSFL. Application example. Pneumatic Rotary Actuators Rotor. Weight kg. Axial force N. Sizes 25..
SFL Sizes 25.. 64 Weight 0.09.. 0.71 kg Torque 0.12 Nm.. 3.9 Nm Axial force 10.. 50 N Bending moment 0.1.. 0.5 Nm Application example Sorting unit with SFL rotor to drive the separator switch Rotor SFL
More informationiglidur G The General Purpose Bearing
iglidur The eneral Purpose Bearing Most popular iglidur material worldwide. iglidur bearings cover an extremely wide range of different requirements they are truly all round. Typical applications cover
More informationLinear Bushings and Shafts
Linear Bushings and Shafts 45 b 1cr RA 83 100.1 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum Runner
More informationLINEAR ACTUATORS. hepcomotion.com
LINEAR ACTUATORS hepcomotion.com PDU2 Belt Driven DLS Belt Driven 3 4 SBD Belt Driven A SDM Ball Screw HDCS Heavy Duty Ball Screw 8 9 LINEAR ACTUATORS ctuator HDLS Heavy Duty Belt Driven PSD Ball Screw
More informationFEASIBILITY STYDY OF CHAIN DRIVE IN WATER HYDRAULIC ROTARY JOINT
FEASIBILITY STYDY OF CHAIN DRIVE IN WATER HYDRAULIC ROTARY JOINT Antti MAKELA, Jouni MATTILA, Mikko SIUKO, Matti VILENIUS Institute of Hydraulics and Automation, Tampere University of Technology P.O.Box
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationActuator Capabilities
Actuator Capabilities The Compact Difference... Compact Automation Products brand, is a market-leading manufacturer of space-efficient linear actuator solutions including, industry standard and custom
More informationDouble piston rotary drive DRQD-6/... / b [ ] (en) Operating instructions
Double piston rotary drive (en) Operating instructions 8068584 2017-05b [8068586] Original instructions Symbols: Warning, Caution Fitting and commissioning to be carried out by qualified personnel only
More informationT4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS HYSON 2018
T4 Series HEAVY DUTY GAS SPRINGS IDEAL FOR STAMPING ULTRA-HIGH STRENGTH STEELS 1 Introduction Heavy Duty Gas Springs GENUINELY HYSON Since 1964, HYSON has been dedicated to providing safer and more reliable
More informationThe Available Solution CYCLO DRIVE. Gearmotors & Speed Reducers. Series
The Available Solution CYCLO DRIVE Gearmotors & Speed Reducers 6000 Series WHAT DO YOU THINK OF THIS? THESE ARE THE ADVANTAGES OF THE NEWEST CYCLO, 6000 SERIES: More frame sizes, gear ratios and motor
More informationRE / /09.97
RE 5 05/0.98 05/09.97 Hydraulic Motor (Radial Piston, Multi-Stroke) Type MCR 0, Series X RE 5 05/0.98 Size0 to 400 up to 4 bar up to 400 cm up to 07 Nm Replaces: 09.97 Compact, sturdy construction Smooth
More informationLinear actuators ILA Series
Linear Actuator ILA Series without input drive, with flange and input shaft Linear Actuator ILA Series with input drive - with 2 bevel gearmotors - with single bevel gearmotor - with helical coaxial or
More informationC-SERIES S-SERIES. Metric Machine Screw Jacks EMA LINEAR ACTUATORS
C-SERIES S-SERIES Metric Machine Screw Jacks EMA LINEAR ACTUATORS Power Jacks has a proud engineering heritage dating from the earliest years of the 20th Century. A heritage that is about excellence: about
More informationV SWISS MADE LINEAR TECHNOLOGY
Excerpt from main catalogue inear modules V 11-15 SWISS MDE INER TECHNOOGY ine Tech inear modules Table of contents Product overview 6 7 Design fundamentals / ubrication / Maintenance 8 Profile cross-sections
More informationLow friction, low wear: The Fast and Slow Motion Specialist iglidur J
Low friction, low wear: The Fast and Slow Motion Specialist iglidur Over 250 sizes available from stock Low wear against different shaft materials Low coefficients of friction running dry Vibration dampening
More informationAdjustable Series Hydraulic Shock Absorbers OEM Series. Adjustable Series OEM XT. Overview. Features and Benefits
XT Hydraulic Shock Absorbers Series Overview Xtreme Mid-Bore Series Large Series Small Bore Platinum Series Enidine Adjustable Hydraulic Series shock absorbers offer the most flexible solutions to energy
More informationContents. Page. 1. Product description. 2. The AXC line of linear axes. 3. AXLT line of linear tables. AXC and AXS product overview...
SNR Industry Contents Page 3 1. Product description AXC and AXS product overview... 6-8 Dynamic load ratings of the linear motion systems... 9 Compact modules... 10-11 Linear tables... 12 Telescopic axes...
More informationHeavy Duty Ball Screw Linear Actuators
Heavy Duty Ball Screw Linear Actuators Thrust From 2,000 to 25,000 lbf Heavy Wall Steel Construction Longest Life Simultaneous High Thrust with High Speed Piston with Rugged Anti Rotation Feature Sealed
More informationalpha Components & Systems Low backlash planetary gearheads Servo right-angle gearheads Mechanical systems
alpha Components & Systems Low backlash planetary gearheads Servo right-angle gearheads Mechanical systems Competence in many sectors alpha Machine tools and manufacturing systems Maximum precision, process
More informationCLASSICA Imperial pitch - CD MXL - XL - L - H - XH SYNCHRONOUS BELT - - CHD CD APPLICATIONS KEY FEATURES & BENEFITS BELT MATERIAL.
CLASSICA Imperial pitch - CD Performance index The CLASSICA synchronous belt, being designed with imperial pitch, is a valid and economical alternative solution in low/medium torque transmission systems.
More informationHeavy duty wheels and castors with cast polyurethane tread Blickle Besthane Soft
Heavy duty wheels and castors with cast polyurethane tread 236 we innovate mobility www.blickle.com Table of Contents ALBS LK LKR LU LH LS Series Page ALBS 80-300 mm 180-1150 kg 238 239 LK-ALBS 80-200
More informationndustr SNR our guide to linear modules
ndustr SNR our guide to linear modules SNR A bearing manufacturer known across the world For almost a century SNR has been focusing on the development, design and manufacture of bearings. Today SNR has
More informationJarret Series. BC1N, BC5, LR Series. Jarret Series. Overview Tel.: Fax:
JT Jarret Series BC1N, BC5, LR Series Overview Jarret Series LR Series BC5 Series BC1GN Series BC1ZN Series Spring The design of Jarret Industrial Shock Absorber utilizes the unique compression and shear
More informationalpha Value Line Individual Talents Efficient Flexible Reliable
alpha Value Line Individual Talents Efficient Flexible Reliable WITTENSTEIN alpha adapted for any axis The perfect drive solution for every requirement WITTENSTEIN alpha develops complete, single-supplier
More informationSIT Power Transmission, a history of passion and technology
SIT Power Transmission, a history of passion and technology SIT S.p.A., a core member of the Scaglia Group which was founded nearly 200 years ago in Bergamo Italy, has a 50 years history dedicated to manufacturing
More informationLinear Systems Solutions Defining the Future with the Schaeffler Group
Linear Systems Solutions Defining the Future with the Schaeffler Group LINEAR ACTUATORS Linear Solutions Provider Part retrieval systems, palletizers, custom tool changers, and dispensing robots are a
More informationV-Drive Technical brochure. Maximum power density Constant torsional backlash Supreme smooth running
V-Drive Technical brochure Maximum power density Constant torsional backlash Supreme smooth running V-Drive Basic The quiet endurance runner Servo worm gearheads with output shaft and hollow shaft. The
More informationProfi le rail guides LLR
Profi le rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationISOMOVE. Mechanical actuators ISO 6431
ISOMOVE Mechanical actuators ISO 6431 ISOMOVE INDEX 2 Introduction 4 Mounting information and advices 6 10 40 14 20 63 25 80 29 33 Overall dimensions INTRODUCTION GENERAL FEATURES The ISOMOVE actuators
More informationGraphical representation of a gear
Homework 4 Gears Gears are designed to transmit rotary motion. Often they are arranged in a gear train (meshed together). Gear trains provide a change in speed, torque (turning force) and direction (clockwise
More informationBall Transfers. Spherical Rolling Joints. Couplings. Linear Clampers. Linear Bushings NIPPON THOMPSON CO., LTD. CAT-2915E CAT-2915E
Spherical Rolling Joints Linear Clampers Linear Bushings Couplings CAT-91E Printed in Japan 1.(SIG) NIPPON THOMPSON CO., LTD. CAT-91E Alliance Partner Products Alliance Partner Products are expressly selected
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationSELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS
SELF-PRIMING, SOLIDS-HANDLING TRASH PUMPS GRpumps.com S U P E R T S P E C I F I C A T I O N S SIZES MATERIALS OF CONSTRUCTION MAX. CAPACITY MAX. HEAD MAX. SOLIDS 3", 4", 6", 8", 10" (75 mm, 100 mm, 150
More informationSPIRACON. ROLLER SCREWS SPIRACON PRODUCT CATALOGUE
SPIRACON ROLLER SCREWS PRODUCT CATALOGUE SPIRACON www.powerjacks.com TOTAL CAPABILITY IN ACTUATION Power Jacks is a world leader and pace-setter in the field of mechanical linear actuation and power transmission,
More information1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
More informationEDVC Velocity and Feed Controllers
EDVC Velocity and Feed Controllers Hydraulic Speed/Feed Controllers from Enertrols are selfcontained sealed units designed for precise control of speed in both directions of travel. The travel speed can
More informationSizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high
More informationDeceleration Technology. Rotary Dampers with high-torque range WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H
Rotary Dampers with high-torque range WRD-H 2515 WRD-H 3015 WRD-H 4025 WRD-H 6030 Deceleration Technology ONLINE CALCULATION AND 2D / 3D CAD DOWNLOAD M m L F Benefits Material: - Aluminium and steel Applications:
More informationSHAFT MOUNTED HELICAL GEAR REDUCER
Shaft Mounted Helical Gear Assembly INTRODUCTION The VIGNESSH Shaft Mounted Helical Gear Units are the result of experience in design and production, taking advantage of the most recent relevent research
More informationFixed Displacement Gear Pumps
Fixed Displacement Gear Pumps D/H/HD Series Introduction Series D/H/HD Features Pressure-loaded design Efficient, simple design - few moving parts Exceptionally compact and lightweight for their capacity
More information