MAS601 Design, Modeling & Simulation
|
|
- Marian Hardy
- 6 years ago
- Views:
Transcription
1 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 1 MAS601 Design, Modeling & Simulation Hardware-In-the-Loop Simulation Bond Graph 20-Sim Siemens PLC ET200S G. Hovland
2 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 2 What is Hardware-In-the-Loop verification?
3 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 3 V-Model for Product Development System Definition System Testing Rapid Prototyping Hardware-inthe-Loop Testing Targeting An increasing number of companies include HILtesting as a part of FAT (Factory Acceptance Test)
4 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 4 From DNV's website As a leading class society, DNV is confident that HIL is the best test method currently available and represents a significant step forward, says Rysst and concludes Indeed, the process may well become the industry standard, and compared to today s maritime test standards, enable a significantly improved testing regime. HIL also has the capacity to make systems safer. For these reasons, DNV is committed to HIL testing.
5 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 5 Some Advantages of HIL Testing Reduced need for expensive prototypes Controller design can be started early, in parallel with mechanical/hydraulic design Possibility for more interaction between control engineering discipline and mechanical/hydraulic disciplines at the design-stage (mechatronics) Unlikely situations can be tested (ex. failures and redundancy) The controller s response to sensor failures can be simulated and tested Potential for reducing commissioning time and costs Increased focus on modelling can be an enabler for remote diagnostics and tuning
6 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 6 Why use the Bond Graph to Create a HIL simulator? Algebraic loops can be completely removed, even for large and complicated models. Preferred causality on R elements. Models containing no algebraic loops can easily be simulated on relatively simple hardware, such as a PLC. PLCs are robust and, hence, the simulator can be used in rough environments, for example offshore. No need for high-performance CPU power, such as a dedicated real-time PC. Siemens ET200S with IO modules. Will be used to simulate Bond Graph Models.
7 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 7 Hardware setup Siemens PLC ET 200S 2. Hardware setup in Step 7 for PLC ET 200S Start up TIA Portal Click on «Create new project«enter a name for your project (e.g. PLC_setting ) and click Create" to confirm.
8 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 8 Hardware setup Siemens PLC ET 200S Click on Add new device Select PLC IM PN/DP F-CPU Note: We have two CPU types in the lab, 8FB00 and 8FB01.
9 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 9 Hardware setup Siemens PLC ET 200S Click on Device Configuration Setup the ethernet address to
10 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 10 Hardware setup Siemens PLC ET 200S 2. Configuring the remaining HW The CPU is always placed in slot 2. If you have a Power supply, then this can be configured in slot 1. Slot 3 is reserved for an Interface Module (IM), e.g. if you need additional Profinet ports, etc. The Power module PM-E (power to units on the bus) is inserted in slot 4 by selecting slot 4 and double-clicking on the module
11 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 11 Hardware setup Siemens PLC ET 200S 2. Configuring the remaining HW Then the 2 DO, 3 DI, 2 AI and 1 AO units are inserted in slots 5-12.
12 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 12 Hardware setup Siemens PLC ET 200S Click on the Compile button Check for errors and warnings 2. Establishing contact between PC and PLC
13 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 13 Hardware setup Siemens PLC ET 200S The programming device (your PC) must be connected to the IM PN/DP CPU interface module. Often an MPI interface is default and we have to change to TCP/IP (Auto). Click on the Refresh button to find the IP address of the PLC Select the PLC in the list of Accessible devices, module type, etc. is assigned to a IP address for the PLC. Click on Load and the hardware configuration is downloaded into the PLC.
14 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 14 Hardware setup Siemens PLC ET 200S Select the download option Accept modules different version firmware Load and click Finish
15 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 15 Hardware setup Siemens PLC ET 200S Exercise Connect the PC and PLC Start Step 7 and create a project PLC_setting Define the hardware structure in the project. Compile, save and download into the PLC
16 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 16 Siemens SCL: Add New Blocks FC = Function without memory FB = Function with memory (DB)
17 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 17 Bond Graph: 0-Junction with 3 inputs as FC f2 f3 Positive sign means into the bond SCL Language
18 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 18 Bond Graph: 0-Junction with 4 inputs as FC e 1 e 2 f 2 e 3 0 f 1 e 4 f 4 f 3 e 1 = e 2 = e 3 = e 4 f 1 = f 2 f 3 f 4 f2 f3 f4
19 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 19 Bond Graph: 1-Junction with 3 inputs as FC
20 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 20 Bond Graph: 1-Junction with 4 inputs as FC e 1 e 2 f 2 e 3 1 f 1 e 4 f 4 f 3 f 2 = f 3 = f 4 =f 1 e 1 = e 2 e 3 e 4
21 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 21 Bond Graph: Capacitor as FB and DB (Integral Causality) e f C
22 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 22 Bond Graph: Inductor as FB and DB (Integral Causality) e f I
23 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 23 Bond Graph: Transformer as FC (causality 1) e 1 e TF 2 f 1 f 2
24 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 24 Bond Graph: Transformer as FC (causality 2) e 1 e TF 2 f 1 f 2
25 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 25 Bond Graph: Gyrator as FC (causality 1) e 1 e GY 2 f 1 f 2
26 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 26 Bond Graph: Gyrator as FC (causality 2) e 1 e GY 2 f 1 f 2
27 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 27 Bond Graph: Resistor (causality 1) e f R
28 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 28 Bond Graph: Resistor (causality 2) e f R
29 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 29 Bond Graph: Example Data-Block 1
30 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 30 Bond Graph: Simulation in 20-Sim
31 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 31 Bond Graph: Initialisation of variables in OB100
32 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 32 Bond Graph: Implementation as FBD in OB35
33 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 33 Bond Graph: OB35 Network 3
34 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 34 Bond Graph: Go Online Steady-State Results (DB1) Steady State Flow f 5 = 1.0 (same as in 20-Sim)
35 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 35 PC Station Add a PC Station with network card and WinCC RT Advanced. Set the IP address to: (important). Otherwise, conflict with PLC which has
36 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 36 PC Station Change name of PC Station to the same as the Windows PC. In UiA labs: MECHATRONICS Add a new screen: Main Double-click on Runtime Settings: Turn off «Full-screen mode»
37 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 37 PC Station: Main Screen Insert a Trend Display Right-click: Properties Create a new Trend: Tag: DB1 f5 Trend values = 999 Left value axis: Axis end = 2 f5 = Speed of motor
38 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 38 PC Station Check HMI Connection under: Devices and Networks: Network View
39 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 39 WinCC RT Advanced To start the HMI, click on «RT» Switch the PLC to Run and check the step-response Should be the same as in in 20-Sim.
40 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 40 Analog Input (Potmeter) as Source: Se Add variable in DB1 Type: PIW352
41 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 41 WinCC RT Advanced: Main Screen Change: Axis end = 10. Vary Se input (Potmeter) The pot.meter controls the input voltage (Se) in the Bond Graph.
42 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 42 WinCC RT Advanced: Main Screen More HMI Elements f5 (Trend, Black) Signal_1 (Trend, red) Signal_1 (Gauge) Circle (Tag on I3.0) Animation (red,blue) Set HMI Tags: Acquisition Cycle = 100ms
43 MAS601 Design, Modelling and Simulation of Mechatronic Systems, Semester 2, Page: 43 Further Exercises: Optional Implement these first in 20-Sim, then on the PLC. Compare the responses. Use first Se=1.0, then use Analog Input (Potmeter) as source.
Unidrive M700 Class leading performance with onboard real-time Ethernet
Unidrive M Class leading performance with onboard real-time Ethernet. kw -.8 MW Heavy Duty (. hp -, hp) V V V 9 V Unidrive M features Easy click-in keypad connection Range of multi-language LCD keypads
More informationUNITROL 6800 excitation systems Proven performance solutions
UNITROL 6800 excitation systems Proven performance solutions Setting the standard ABB is the world leading volume supplier of UNITROL automatic voltage regulators (AVR) and static excitation systems (SES)
More informationExercise 4-1. Nacelle Control System EXERCISE OBJECTIVE DISCUSSION OUTLINE DISCUSSION. Control and simulation of environmental conditions
Exercise 4-1 Nacelle Control System EXERCISE OBJECTIVE When you have completed this exercise, you will know more about the logic behind the control system. In particular, you will understand alarm management
More informationSitras SCS, -RCI, -FFP, -TTU
Sitras SCS, -RCI, -FFP, -TTU control system for traction power supply Remote control interface Frame fault protection Transfer trip unit siemens.com/rail-electrification The Sitras SCS station control
More informationSIMATIC. Process Control System PCS 7 FOUNDATION Fieldbus. Security information 1. Introduction 2. Basics of the FOUNDATION Fieldbus 3
Security information 1 Introduction 2 SIMATIC Process Control System PCS 7 Commissioning Manual Basics of the FOUNDATION Fieldbus 3 System planning 4 Engineering 5 Commissioning 6 Redundancy and system
More informationProcess Control System PCS 7 FOUNDATION Fieldbus
Security information 1 Introduction 2 Basics of the FOUNDATION Fieldbus 3 Process Control System PCS 7 Commissioning Manual System planning 4 Engineering 5 Commissioning 6 Redundancy and system changes
More informationIntegration of EtherCAT in Advanced Test Systems Solutions and Challenges. Dr. Frank Schütte, Andreas Tenge, Dr. László Juhász dspace GmbH, Paderborn
Integration of EtherCAT in Advanced Test Systems Solutions and Challenges Dr. Frank Schütte, Andreas Tenge, Dr. László Juhász dspace GmbH, Paderborn ETG 2013 Introduction Actual developments in the mobile
More informationLOW VOLTAGE WIND CONVERTERS. ABB wind turbine converters ACS880, 800 kw to 8 MW
LOW VOLTAGE WIND CONVERTERS ABB wind turbine converters ACS880, 800 kw to 8 MW 2 ABB WIND CONVERTERS, ACS880 WIND TURBINE CONVERTERS ACS880 wind turbine converter Flexible solution The ACS880 converter
More informationSiemens AG SITOP power supply SITOP DC UPS. Solutions for buffering 24 V in the automation. Edition 11/2017. Brochure. siemens.
power supply DC UPS Solutions for buffering 24 V in the automation Brochure Edition 11/2017 siemens.com/sitop-ups Solutions for bridging power fluctuations and power failures SOLUTIONS Uninterruptible
More informationOPENSTEERING PLATFORM
MDYNAMIX AFFILIATED INSTITUTE OF MUNICH UNIVERSITY OF APPLIED SCIENCES OPENSTEERING PLATFORM FOR DEVELOPMENT OF ADVANCED STEERING FUNCTIONS, ADAS AND AUTONOMOUS VEHICLES 9th International Munich Chassis
More informationFoundation Fieldbus System Design and Engineering of CSPC Nanhai Project
Foundation Fieldbus System Design and Engineering of CSPC Nanhai Project Stephen Weng MAC Chief System Integration Engineer ISD-MASP-S05008 Copyright Yokogawa Electric Corporation February 18, 2005 Background
More informationSignal Hardware-In-the-Loop simulation of a Hybrid locomotive
International Workshop on HIL simulation HIL 16 summer school Lille, 1-2 September 216 http://l2ep.univ-lille1.fr/hil216/ Signal Hardware-In-the-Loop simulation of a Hybrid locomotive Dr. T. Letrouvé 1,3,
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) The UFPT is a modular, smart and unique fluid power and motion control training unit. It contains an excellent integration of industrial-graded hardware and builtin
More informationCP600 Communication Protocols
3ADR023066N0202 F854p_a_CP600_Communication_Protocols_Rev_D, 07/2015 (3ADR023066N0202) CP600 Communication Protocols CP600 Control Panels Contents Communication Protocols ABB Controllers: Drivers List
More informationUnidrive M600 High performance drive for induction and sensorless permanent magnet motors
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M600 features Easy click-in keypad
More informationPowerFlex AC Drives Portfolio
PowerFlex AC Drives Portfolio PUBLIC INFORMATION 1 Rev 5058-CO900E Copyright 2013 Rockwell Automation, Inc. All Rights Reserved. PUBLIC INFORMATION Copyright 2015 Rockwell Automation, Inc. All Rights Reserved.
More informationABB uses an OPAL-RT real time simulator to validate controls of medium voltage power converters
ABB uses an OPAL-RT real time simulator to validate controls of medium voltage power converters ABB is a leader in power and automation technologies that enable utility and industry customers to improve
More informationOrion BMS Purchasing Guide Rev. 1.2
www.orionbms.com Orion BMS Purchasing Guide Rev. 1.2 Main Components... 2 Orion BMS Unit... 2 Current Sensor... 4 Thermistors... 5 CANdapter... 6 Wiring Harnesses... 7 Cell voltage tap wiring harnesses...
More informationFinite Element Based, FPGA-Implemented Electric Machine Model for Hardware-in-the-Loop (HIL) Simulation
Finite Element Based, FPGA-Implemented Electric Machine Model for Hardware-in-the-Loop (HIL) Simulation Leveraging Simulation for Hybrid and Electric Powertrain Design in the Automotive, Presentation Agenda
More informationWelcome to ABB machinery drives training. This training module will introduce you to the ACS850-04, the ABB machinery drive module.
Welcome to ABB machinery drives training. This training module will introduce you to the ACS850-04, the ABB machinery drive module. 1 Upon the completion of this module, you will be able to describe the
More informationNR Electric Uses RT-LAB Real-time Simulator to Test the Control and Protection System for the Zhoushan Multiterminal
NR Electric Uses RT-LAB Real-time Simulator to Test the Control and Protection System for the Zhoushan Multiterminal MMC-HVDC Project Located in Zhoushan, Zhejiang Province, China, the Zhoushan MMC-HVDC
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) Milwaukee School of Engineering Applied Technology Center TM Department of Professional Education The UFPT is a modular, smart and unique fluid power and motion control
More informationby William Gilbert, Industry Business Development Manager, Converting and Cranes, Motion Control Solutions
Date: April 23,2010 THE CASE FOR REGENERATIVE AC DRIVE MOTORS A practical alternative to mechanical braking and non-regen drives systems in the converting, packaging, wireforming and printing industries
More informationSIMATIC. Process Control System PCS 7 FOUNDATION Fieldbus. Introduction 1. Basics of the FOUNDATION Fieldbus 2. System planning 3.
Introduction 1 Basics of the FOUNDATION Fieldbus 2 SIMATIC Process Control System PCS 7 Commissioning Manual System planning 3 Engineering 4 Commissioning 5 Redundancy and system changes in operation 6
More informationIs the heart of your engine protected?
Is the heart of your engine protected? Avoid open-up inspections and protect the heart of your engine with the AMOT Bearing Condition Monitor - XTS-W Bearing Condition Monitor Overview An essential tool
More informationS. Jabez Dhinagar Ph.D Vice President. TVS Motor Company Ltd. 21 st November 2008, NI Bangalore
S. Jabez Dhinagar Ph.D Vice President Advanced Engineering TVS Motor Company Ltd. 21 st November 2008, NI Bangalore CONTROL SYSTEM DEVELOPMENT CYCLE System Definition System Testing Rapid Prototyping Hardware
More information800xA High Integrity - SIL3 Introduction
Kristian Olsson Manager Safety CoE 800xA High Integrity - SIL3 Introduction ABB Group - 1 - Content Safety Systems Market & Trends 800xA High Integrity Achievements So Far 800xA High Integrity Technical
More informationUnidrive M600 High performance drive for induction and sensorless permanent magnet motors
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M Optimized throughput, open automation
More informationScaling industrial control technologies for food & beverage industry
ISAB/F&B Symp/20160226/Slide No. 1 National Symposium on Automation & Digital Transformation of Food & Beverage Industry 26 th & 27 th February 2016 Scaling industrial control technologies for food & beverage
More informationUnidrive M400 Fast set-up and diagnostics with real-text display, integrated PLC and safety inputs
Unidrive M400 Fast set-up and diagnostics with real-text display, integrated PLC and safety inputs 0.25 kw - 110 kw (0.33 hp - 150 hp) 100 V 200 V 400 V 575 V 690 V Unidrive M400 features Optional AI-485
More informationAmpl2m. Kamil Herman Author of Ampl2m conversion tool. Who are you looking at
Who are you looking at Kamil Herman Author of conversion tool Senior automation engineer Working in Automation with ABB control systems since 1995 6 years in ABB Slovakia 2 year working for ABB Mannheim,
More informationAvailable online at ScienceDirect. Physics Procedia 67 (2015 )
Available online at www.sciencedirect.com ScienceDirect Physics Procedia 67 (2015 ) 1181 1186 25th International Cryogenic Engineering Conference and the International Cryogenic Materials Conference in
More informationReal-Time Modelica Simulation on a Suse Linux Enterprise Real Time PC
Real-Time Modelica Simulation on a Suse Linux Enterprise Real Time PC Arno Ebner Martin Ganchev Helmut Oberguggenberger Franz Pirker Arsenal Research Giefinggasse 2 1210 Vienna Austria arno.ebner@arsenal.ac.at
More informationSIMATIC. Process Control System PCS 7 FOUNDATION Fieldbus. Introduction 1. Basics of the FOUNDATION Fieldbus 2. System planning 3.
Introduction 1 Basics of the FOUNDATION Fieldbus 2 SIMATIC Process Control System PCS 7 Commissioning Manual System planning 3 Engineering 4 Commissioning 5 Redundancy and system changes in operation 6
More informationDANGER indicates that death or severe personal injury will result if proper precautions are not taken.
Preface Introduction to the SINAUT ST7 system 1 SIMATIC NET SINAUT ST7 Network structures and topologies 2 Installation guide 3 Installing and putting a TIM into operation 4 System Manual Installing and
More informationInstallation and Programming Manual Part: Building Network Interface Card Product: 4100ES
Installation and Programming Manual Part: Building Network Interface Card 4100-6047 Product: 4100ES Cautions and Warnings READ AND SAVE THESE INSTRUCTIONS- Follow the instructions in this installation
More informationDRAFT (IMECE ) Hardware-In-the-Loop Simulation for Control Development in EHPV Applications
DRAFT (IMECE2003-43729) Hardware-In-the-Loop Simulation for Control Development in EHPV Applications Sooyong Jung, Young J. Lee and Wayne J. Book Geroge W. Woodruff School of Mechanical Engineering Georgia
More informationTable of Contents. 95 IMS 25 flexible manufacturing line with 5 stations. 104 IMS 26 flexible manufacturing line with 6 stations
Table of Contents Table of Contents Automation Technology IMS Industrial mechatronics system Mechatronics Sub-Systems with UniTrain-I IMS 1.2: DC transport system IMS 1.3: AC transport system IMS 3 Sorting
More informationBuildings. Product Name. THE SMART CHOICE FOR ENERGY SAVINGS. SmartVFD HVAC and BYPASS
Buildings Product Name THE SMART CHOICE FOR ENERGY SAVINGS. SmartVFD HVAC and BYPASS SMARTVFD HVAC AND BYPASS Saving Energy the Smart Way Buildings consume more than 70 percent of the electricity produced
More informationMARINE. Drives and motors for electrically driven deck machinery and offshore winches
MARINE Drives and motors for electrically driven deck machinery and offshore winches 2 MARINE BROCHURE Performance. Speed. Reliability. Safety. Everything counts. With the help of application expertise
More informationESC-HIL TEST SYSTEM SOLUTIONS FOR VIRTUAL TEST DRIVING
ESC-HIL TEST SYSTEM SOLUTIONS FOR VIRTUAL TEST DRIVING Table of Contents Motivation 3 System at a Glance 4 General Description 5 Block Diagram (example configuration) 6 Use Cases 7 Verification and Validation
More informationAswan high dam - Distributed control system AUTOMATION
Aswan high dam - Distributed control system AUTOMATION Power System Overview Aswan High Dam (AHD) -Hydro Power Plant was erected and commissioned in 1972. At the time it was the world's greatest, as well
More informationInstallation and use. Controller for Rapid Bike Evo and Rapid Bike Racing modules. Issued by: PM approved by DG Rev.00 date 09/01/15 pag.
Installation and use Controller for Rapid Bike Evo and Rapid Bike Racing modules Issued by: PM approved by DG Rev.00 date 09/01/15 pag. 1/10 Description YOUTUNE is a calibration device showing data relative
More informationSafe, fast HV circuit breaker testing with DualGround technology
Safe, fast HV circuit breaker testing with DualGround technology Substation personnel safety From the earliest days of circuit breaker testing, safety of personnel has been the highest priority. The best
More informationSkilmatic SI 3 3 Electric Fail-Safe Actuators
Introducing the 3 rd generation of Skilmatic SI self-contained electric fail-safe actuators. The SI range of self-contained electro-hydraulic actuators combining the simplicity of electrical operation
More informationBond Graph Modeling and Simulation Analysis of the Electro-Hydraulic Actuator in Non-Load Condition
4th International Conference on Sensors, Mechatronics and Automation (ICSMA 2016) Bond Graph Modeling and Simulation Analysis of the Electro-Hydraulic Actuator in Non-Load Condition Liming Yu1, a, Hongfei
More informationAutomation Days Radionica Motion Control
Automation Days 2016 Radionica Motion Control SINAMICS V20 FSAA NEW Up to a power rating of 0.75 kw (line voltage, 1AC, 200 V) now even 24 % smaller and more compact 1 AC 200 V, 0.12 to 0.75 kw with integrated
More information2014 Prins Autogassystemen B.V. World leader in alternative fuel systems
World leader in alternative fuel systems VSI-2.0 DI LPG introduction The Prins VSI-2.0 DI LPG system based on the vapour sequential technology (including Keihin injectors) is currently suitable for the
More informationPROJECT WORK. NAME Engine base calibration process. TUTORs Amorese Stefano. JOB POSITION Engine calibration test bench engineer
Engine base calibration process TUTORs Amorese Stefano Engine calibration test bench engineer 1) Development of base engine calibration data: Performance optimization (maximum torque and power levels,
More informationUnidrive M600 High performance drive for induction and sensorless permanent magnet motors
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M Optimized throughput, open automation
More informationSelect from 3 product types and 14 protocols.
Fieldbus System Select from 3 product types and 14 protocols. * Some protocols are not UL-compliant. Type 1 Type 2 Type 3 Output type for solenoid valves Gateway type Integrated input-output type CAT.E02-27A
More informationDynamic DC Emulator Efficient testing of charging technology and power electronics
Dynamic DC Emulator Efficient testing of charging technology and power electronics Highlights Efficient testing of charging technology The Scienlab ChargingDiscoverySystem (CDS) can be combined with the
More informationTable of Contents. Table of Contents UniTrain UniTrain courses UniTrain mechatronic courses IMS 23/24 with 3/4 subsystems
Table of Contents Table of Contents UniTrain UniTrain courses UniTrain mechatronic courses IMS 23/24 with 3/4 subsystems 1 2 2 3 4 Lucas Nülle GmbH Page 1/16 www.lucas-nuelle.com UniTrain UniTrain is a
More informationInnovations in SINAMICS Drives and SIMOTICS Motion Control Motors Presented by Randy Summervill Manufacturing in America March 14-15, 2018
Innovations in SINAMICS Drives and SIMOTICS Motion Control Motors Presented by Randy Summervill Manufacturing in America March 14-15, 2018 Before we start A Penny for Your Thoughts At the end of the session,
More informationGlobal EV Charging Stations will rise by 2020
Global EV Charging Stations will rise by 2020 Copyright 2015 Axiomtek Co., Ltd. All Rights Reserved In today s world, advances in technology bring higher safety levels and convenience to every aspect of
More informationLSLV High-Performance Standard Drive 0.4~2.2kW 1-Phase 200~240Volts 0.4~15kW 3-Phase 200~240Volts 0.4~75kW 3-Phase 380~480Volts
www.lsis.com High-Performance tandard Drive 0.4~2.2kW 1-Phase 200~240Volts 0.4~15kW 3-Phase 200~240Volts 0.4~75kW 3-Phase 380~480Volts trong power with a compact size! Powerful sensorless control, and
More informationOperating Instructions (Translation)
Product Description Definition The ANTARES RCU consists of the ANTARES Head Module and the ANTARES Connection Module. The ANTARES Head Module contains a CPU, communication interface and power pack. In
More informationImprovement of hydraulic control quality for deep drawing presses through retrofit
Improvement of hydraulic control quality for deep drawing presses through retrofit Speaker: M. Helmke TRsystems GmbH 09.03.2016 10 th International Fluid Power Conference Outline & Introduction Outline
More informationMore Power and Less Fuel with our Electrical Energy Systems. SHARING EXCELLENCE
Defense and Security More Power and Less Fuel with our Electrical Energy Systems. SHARING EXCELLENCE Jenoptik ensures all your equipment remains powered up at all times. Modern military vehicles have become
More informationSINAMICS GM150 IGCT version
/2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /14 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions
More informationArmature Reaction and Saturation Effect
Exercise 3-1 Armature Reaction and Saturation Effect EXERCISE OBJECTIVE When you have completed this exercise, you will be able to demonstrate some of the effects of armature reaction and saturation in
More informationDr. Tony LETROUVE, Dr. Julien POUGET SNCF Innovation & Research Dep., MEGEVH network,
EMR 15 Lille June 15 Summer School EMR 15 Energetic Macroscopic Representation Hardware-In In-the the-loop simulation : hybrid locomotive Energy Storage System behavior tests Dr. Tony LETROUVE, Dr. Julien
More informationCompressor Automation Solutions. For. Safety + Environment + Optimization
Compressor Automation Solutions Power Ignition and Controls a division of Spartan Controls For Safety + Environment + Optimization REMVue - 500 Plus Hi Spec Applications Emissions and Fuel Reduction Performance
More informationMarch 27-29, 2012 Irving, TX
David Tuttle Research Fellow The University of Texas at Austin Home Energy Management Systems (HEMS), Home Area Network (HAN), and Plug-In Electric Vehicles (PEV) (updated) HEMs, HANs & PEVs Different
More informationIBM CMM Quick Reference Guide
IBM CMM Quick Reference Guide Contents Introduction Prerequisites Requirements Components Used CMM Overview CMM Layout Useful CMM Screens Login Screen System Information Screen Event Log Screen Chassis
More informationINSTALLATION GUIDE. InBio Pro Series Access Control Panels. Date: Dec., 2015 Version: 1.1
INSTALLATION GUIDE InBio Pro Series Access Control Panels Date: Dec., 2015 Version: 1.1 2 3 What s in the Box CONTENT 2 Screws & Anchors 2 Screwdriver 4 Diode Contents What s in the Box...2 Optional accessories...4
More informationPowerFlex 755T Drive Solutions New Solutions for Low Harmonic, Regenerative & Common Bus Applications
PowerFlex 755T Drive Solutions New Solutions for Low Harmonic, Regenerative & Common Bus Applications May 2016 Copyright 2016 Rockwell Automation, Inc. All Rights Reserved. 1 Today s PowerFlex 750-Series
More informationWind Turbine Emulation Experiment
Wind Turbine Emulation Experiment Aim: Study of static and dynamic characteristics of wind turbine (WT) by emulating the wind turbine behavior by means of a separately-excited DC motor using LabVIEW and
More informationServo-pneumatic drive solution for welding guns. Top quality welding!
Servo-pneumatic drive solution for welding guns Sturdy and precise! Top quality welding! Highlights Extremely short cycle times High quality and outstanding reproducibility of the spot welds Excellent
More informationNickel Cadmium and Nickel Hydride Battery Charging Applications Using the HT48R062
ickel Cadmium and ickel Hydride Battery Charging Applications Using the HT48R062 ickel Cadmium and ickel Hydride Battery Charging Applications Using the HT48R062 D/: HA0126E Introduction This application
More informationExample application for an supply air control with recirculated air addition. HVAC Application Note 3
Example application for an supply air control with recirculated air addition HVAC Application Note 3 Version 14.03.2007 2 General Copyright 2007 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved.
More informationRS232. CAN. Integration with Tachograph Continental VDO DTCO
RS232. CAN. Integration with Tachograph Continental VDO DTCO User Manual www.galileosky.com Contents Necessary Tools, Equipment and Materials... 3 General Information... 4 Connecting tachograph to the
More information80V 300Ah Lithium-ion Battery Pack Data Sheet
80V 300Ah Lithium-ion Battery Pack Data Sheet 80 V, 300 amp-hour capacity, maintenance-free energy storage, IP65 design, fully integrated BMS, integrated fuse and safety relay protection, highly configurable
More informationUnidrive M600 High performance drive for induction and sensorless permanent magnet motors
Unidrive M600 High performance drive for induction and sensorless permanent magnet motors 0.75 kw - 2.8 MW Heavy Duty (1.0 hp - 4,200 hp) 200 V 400 V 575 V 690 V Unidrive M Optimized throughput, open automation
More informationINTECH Micro 2300-RTD6
INTECH Micro 2300-RTD6 6 Channel RTD Input Station Overview. The Intech Micro 2300 Series is a system of modular I/O Remote Stations, that add an even lower cost option to Intech s already extensive intelligent
More informationSiemens Centre of Excellence Course Plan
Siemens Skill Development Initiatives Industry Relevant Skill Development Program for Gujarat Siemens Centre of Excellence Course Plan Page 1 Table of Contents Labs in the Siemens COE... 3 Courses offered
More informationABB industrial drives ACS800, single drives, 0.55 to 5600 kw
ABB industrial drives ACS800, single drives, 0.55 to 5600 kw Technical catalogue PROFILE INDUSTRIES PRODUCTS APPLICATIONS EXPERTISE PARTNERS SERVICES Contents 1 2 Type code Product series Single drives
More informationIntegrated Solutions for LNG operations. Kongsberg Maritime
Integrated Solutions for LNG operations Kongsberg Maritime International high-tech solutions, from deep sea to outer space Advanced solutions and applications for the maritime, oil & gas, defence and space
More informationPodium Engineering complete race cars, vehicle prototypes high performance hybrid/electric powertrain
Born in the firm belief that design quality, high project commitment and absolute respect of deadlines are key competitive factors for a consulting and engineering company, Podium Engineering is a dynamic
More informationCCM Marine. Optimise your engine performance
CCM Marine Optimise your engine performance CCM Marine - Combustion Monitoring Systems CCM is an easy to use plug and play system, which enables in real time data acquisition of cylinder pressure on engines.
More informationMultimove. IRC5 has enough goodies for everyone. Which one is your favorite? Powerful Software Tools. Modular Controller.
The new robot controller has enough goodies for everyone. Which one is your favorite? Powerful Software Tools Multimove Modular Controller Easy-to-use Graphical FlexPendant Network capabilities 30 sets
More informationForce Control for Machining applications. With speakers notes
Force Control for Machining applications Robotics - 1 May 2007 Contents Introduction Project objectives, execution and result Features, benefits and technical solutions FC Pressure FC SpeedChange Graphical
More informationValveLink SNAP-ON Application
AMS Device Manager Product Data Sheet ValveLink SNAP-ON Application Communicate with both HART and Foundation Fieldbus FIELDVUE digital valve controllers in the same application Online, in-service performance
More informationHIPPS (High Integrity Pressure Protection System)
HIPPS (High Integrity Pressure Protection System) Leonardo Fusi Control & Safety Systems Technology Manager, FS Eng (TUV Rheinland, #1977/09, SIS) IMI CCI HIPPS HIPPS Applications Where can HIPPS be used
More informationAMS ValveLink SNAP-ON Applications
Product Data Sheet AMS ValveLink SNAP-ON Applications n Communicate with both HART and FOUNDATION fieldbus FIELDVUE digital valve controllers in the same application n Online, in-service performance diagnostics
More informationAutomation in Mining. Underground mining automation project Mark Yseboodt Chile November siemens.com/mining. Restricted Siemens AG 2016
Automation in Mining Underground mining automation project Chile Restricted Siemens AG 2016 siemens.com/mining Automation in Mining: Underground project Table of content Introduction 3 Block Cave 6 Deep
More informationis found to comply with DNV GL rules for classification Ships, offshore units, and high speed and light craft
Certificate No: TAA000014K Revision No: 1 This is to certify: That the Peripheral Equipment with type designation(s) JUMO AQUIS touch P (202580), JUMO DICON touch (703571) Issued to JUMO GmbH & Co. KG
More informationFrequency Inverters SJ Series Type P1
Frequency Inverters SJ Series Type P1 Automation Solutions by Hitachi SJ Series, Type P1 High Performance Inverter Hitachi maintains research and development departments throughout the business. These
More informationET9500 BEMS Interface Box Configuration Guide
ET9500 BEMS Interface Box Configuration Guide APPLICABILITY & EFFECTIVITY Explains how to install and configure ET9500 BEMS Interface Box. The instructions are effective for the above as of August, 2015
More informationFast Orbit Feedback (FOFB) at Diamond
Fast Orbit Feedback (FOFB) at Diamond Guenther Rehm, Head of Diagnostics Group 29/06/2007 FOFB at Diamond 1 Ground, Girder and Beam Motion 29/06/2007 FOFB at Diamond 2 Fast Feedback Design Philosophy Low
More informationCATALOG. ABB micro drives ACS55, 0.18 to 2.2 kw
CATALOG ABB micro drives ACS55, 0.18 to 2.2 kw 2 ABB MICRO DRIVES, ACS55, 0.18 TO 2.2 KW/0.25 TO 3 HP Ease of integration. ACS55 drives. 3 Table of contents 004 ABB micro drives, ACS55 005 Easily integrated
More informationTR-09RD. Vibrating wire sensors are used in the mining, civil and hydrological engineering, and other geophysical disciplines.
Vibrating Wire Strain Gauges Introduction Vibrating wire sensors are used in the mining, civil and hydrological engineering, and other geophysical disciplines. There are two versions of the DT80 Range
More informationEVG1200W/10A PHplus-R3
PHplus ballasts for optimal lamp operation constant lamp and preheat current even with long cables adjustable operation parameters lamp operation control via RS485 using ModBus or ZCON protocol enhanced
More informationIndustrial Controls. Soft starters and solid-state switching devices SIRIUS 3RW55 soft starter. Description 1. Safety information
Description 1 Safety information 2 Industrial Controls Soft starters and solid-state switching devices Manual Mounting and dismantling 3 Connecting 4 Parameter assignment 5 Commissioning 6 Functions 7
More informationVEHICLE DYNAMICS BASED ABS ECU TESTING ON A REAL-TIME HIL SIMULATOR
HUNGARIAN JOURNAL OF INDUSTRIAL CHEMISTRY VESZPRÉM Vol. 39(1) pp. 57-62 (2011) VEHICLE DYNAMICS BASED ABS ECU TESTING ON A REAL-TIME HIL SIMULATOR K. ENISZ, P. TÓTH, D. FODOR, T. KULCSÁR University of
More informationMIC4 IGNITION CONTROLLER
MIC4 IGNITION CONTROLLER MIC4 MOTORTECH IGNITION CONTROLLER Try the alternative. Call the nearest MOTORTECH sales partner for more information. REV.02/2015 MIC4 IGNITION CONTROLLER The economically attractive
More informationComponents and tooling to reduce complexity and cost in E/E powertrain system design for Hybrid electric Vehicles
Components and tooling to reduce complexity and cost in E/E powertrain system design for Hybrid electric Vehicles Khaled Douzane khaled.douzane@scaleochip.com NextSTEP Solutions A new Powertrain MCU (Scaleochip)
More informationMSD: Case Studies D R. T A R E K A. T U T U N J I P H I L A D E L P H I A U N I V E R S I T Y, J O R D A N
MSD: Case Studies D R. T A R E K A. T U T U N J I P H I L A D E L P H I A U N I V E R S I T Y, J O R D A N 2 0 1 4 Outline Elements and design of mechatronic systems have been described in previous sections
More informationVersatile. Powerful. Space-saving. siemens.com/et200sp-motorstarter
Motor starter SIMATIC ET 200SP Versatile. Powerful. Space-saving. siemens.com/et200sp-motorstarter Optimum protection for your motors and loads The SIMATIC ET 200SP motor starter with its safety and standard
More informationTECHNICAL SPECIFICATIONS DESCRIPTION: - CENTAC COMPRESSOR 2
TECHNICAL SPECIFICATIONS DESCRIPTION: - CENTAC COMPRESSOR 2 Description: The Centac 2 compressor is a multi-stage (3-stage) centrifugal air compressor. It has an output of approx 5000 to 6000 m 3 /hr (actual
More information