LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29

Transcription

1 General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket Bi-Pin T for LEDs and filament lamps Keyed socket connector and flat ribbon cable or PCB Ring nut or click fixing method. Content TAST illuminated pushbutton - 22 TAST illuminated pushbutton with flush lens, Click quick-assembly feature - 24 TAST illuminated pushbutton with flush lens, ring nut fixing - 24 TAST illuminated pushbutton with protruding lens, Click quick-assembly feature - TAST illuminated pushbutton with protruding lens, ring nut fixing - TAST illuminated pushbutton with protruding collar, Click quick-assembly feature - 26 TAST illuminated pushbutton with protruding collar, ring nut fixing - 26 TAST selector switch - 28 TAST selector switch, Click quick-assembly feature - 29 TAST selector switch, ring nut fixing - 29 TAST keylock switch - 30 TAST keylock switch - 3 TAST emergency stop pushbutton - 32 TAST emergency stop pushbutton, ring nut fixing - 33 TAST signal lamp - 34 TAST signal lamp, 24 V, Click quick-assembly feature - 36 TAST signal lamp, 24 V, ring nut fixing - 36 Pushbuttons Stock items are marked - 9

2 Series TAST 6.2 mm mounting hole diameter Design Click-Version. As delivered 2. Insert pushbutton in hole 3. Actuate once 4. Insert connector with flat-ribbon cable Disassembly Click-Version Click-Version from front (only for pushbuttons and signal lamps with special tool for dismounting). Grip body/lens 2. Pull out body/lens 3. Release click lever 4. Pull out pushbutton/signal lamp with cable - 20 Pushbuttons

3 Dimensional drawing With quick connector and flat-ribbon cable Connection diagram (PCB top view) + 4 = pushbutton connection = lamp connection With Plug-in socket for PCB Front panel top view PCB top view PCB hole diagram +4 contact connection 2+3 lamp connection Pushbuttons - 2

4 TAST illuminated pushbutton Pict.: colourless Pict.: blue Technical data General information Form of lens Colour of lens Form of collar Dimensions Length of collar mm Width of collar mm Overall height 7. mm connector 30.7 mm 33.4 mm Mounting hole 6.2 mm Mechanical design Mounting Terminals pin connector 4-pol./ Contact system snap-action contact Contact function momentary Contact arrangement NO Contact materials Au Illuminability yes Lamp socket Bi-Pin T /T / 4 Mechanical characteristics Operating force max. 6 N Operating travel 3 mm Switching travel 2 mm Robustness min. 00 N Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance max. Bouncing time max. 42 V 0.02 V 00 ma 0.0 ma 00 mω 5 ms Other specifications Operating life (operations) Degree of protection from front side IP65 without lamp min. - C without lamp max. +70 C with lamp min. - C with lamp max. +55 C Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment Weight acc. to IEC and 2-30 acc. to IEC and g Accessories TAST illuminated pushbutton Filament lamp, Bi-Pin T / 4 base, 2 V / Filament lamp, Bi-Pin T / 4 base, 28 V / LED Bi-Pin T superbright, red, 24 V / Stock items are marked Pushbuttons

5 Accessories TAST illuminated pushbutton LED Bi-Pin T superbright, green, 24 V / LED Bi-Pin T superbright, yellow, 24 V / LED Bi-Pin T superbright, blue, 24 V / LED Bi-Pin T superbright, white, 24 V / LED Bi-Pin T, red, 3 V / LED Bi-Pin T, green, 3 V / LED Bi-Pin T, yellow, 3 V / Plug-in socket for PCB / Cable (flat ribbon cable 0 cm with socket connector and male quick connector, AMP 4-pin) / Disassembly tool for TAST, RAFIX / Blanking cap complete with sealing disc and ring nut, / Label holder, flush, for collar / Flat ribbon cable, 4-wire, m long / Fixing spanner M 5, M / Legend insert for illuminated versions /2000 Legend label 23 x 6 for label holder, without legend / Socket connector, 4-pin / Pushbuttons Stock items are marked - 23

6 TAST illuminated pushbutton with flush lens, "Click" quick-assembly feature Pict.: colourless Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts momentary NO transparent / / /002 colourless momentary NO transparent red / / /306 momentary NO transparent yellow / / /403 momentary NO transparent green / / /505 momentary NO transparent blue / / /607 Technical data see page - 22 Accessories: Legend insert for illuminated versions: /2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. TAST illuminated pushbutton with flush lens, ring nut fixing Pict.: green Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts momentary NO transparent / / /002 colourless momentary NO transparent red / / /306 momentary NO transparent yellow / / /403 momentary NO transparent green / / /505 momentary NO transparent blue / / /607 Technical data see page - 22 Accessories: Legend insert for illuminated versions: /2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side Stock items are marked Pushbuttons

7 TAST illuminated pushbutton with protruding lens, "Click" quick-assembly feature Pict.: red Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts momentary NO transparent / / /002 colourless momentary NO transparent red / / /306 momentary NO transparent yellow / / /403 momentary NO transparent green / / /505 momentary NO transparent blue / / /607 Technical data see page - 22 Accessories: Legend insert for illuminated versions: /2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. TAST illuminated pushbutton with protruding lens, ring nut fixing Pict.: blue Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts momentary NO transparent / / /002 colourless momentary NO transparent red / / /306 momentary NO transparent yellow / / /403 momentary NO transparent green / / /505 momentary NO transparent blue / / /607 Technical data see page - 22 Accessories: Legend insert for illuminated versions: /2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. Pushbuttons Stock items are marked -

8 TAST illuminated pushbutton with protruding collar, "Click" quick-assembly feature Pict.: colourless Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts momentary NO transparent / / /002 colourless momentary NO transparent red / / /306 momentary NO transparent yellow / / /403 momentary NO transparent green / / /505 momentary NO transparent blue / / /607 Technical data see page - 22 Accessories: Legend insert for illuminated versions: /2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side. TAST illuminated pushbutton with protruding collar, ring nut fixing Pict.: yellow Contact function Contact arrangement Colour of lens Order no. complete Order no. single parts momentary NO transparent / / /002 colourless momentary NO transparent red / / /306 momentary NO transparent yellow / / /403 momentary NO transparent green / / /505 momentary NO transparent blue / / /607 Technical data see page - 22 Accessories: Legend insert for illuminated versions: /2000 Note when using LEDs: A notch on the lamp socket identifies the cathode side Stock items are marked Pushbuttons

9 TAST selector switch Technical data General information Form of lens Colour of handle Form of collar Dimensions Length of collar Width of collar Overall height connector Mounting hole Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illuminability Mechanical characteristics Operating force min. Rotating angle Robustness max. handle black opaque mm mm 7 mm 30.7 mm 33.4 mm 6.2 mm pin connector 4-pol./ snap-action contact NO Au no 0.03 Nm.5 Nm Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance max. Bouncing time max. 42 V 0.02 V 00 ma 0.0 ma 00 mω 5 ms Other specifications Operating life (operations) Degree of protection from front side IP65 min. - C max. +70 C Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment Weight according to IEC and 2-30 according to IEC and g Accessories TAST selector switch Plug-in socket for PCB / Cable (flat ribbon cable 0 cm with socket connector and male quick connector, AMP 4-pin) Blanking cap complete with sealing disc and ring nut, / / Label holder, flush, for collar / Stock items are marked Pushbuttons

10 Accessories TAST selector switch Flat ribbon cable, 4-wire, m long / Fixing spanner M 5, M / Socket connector, 4-pin / TAST selector switch, "Click" quick-assembly feature Contact arrangement Contact function Rotating angle Form of lens Order no. complete NO latching right, x 90 handle /000 Technical data see page - 28 TAST selector switch, ring nut fixing Contact arrangement Contact function Rotating angle Form of lens Order no. complete NO latching right, x 90 handle /000 Technical data see page - 28 Pushbuttons Stock items are marked - 29

11 TAST keylock switch Technical data General information Colour of lens Form of collar black opaque Mechanical characteristics Operating force max..5 Nm Rotating angle 90 Dimensions Length of collar Width of collar Overall height connector Mounting hole Mechanical design Mounting Terminals mm mm 32.3 mm 30.7 mm 33.4 mm 6.2 mm Contact system Contact function Contact arrangement Contact materials Illuminability Lamp socket Lock Wafers Lock type 520 Number of locking positions 0000 Main key Symmetric key Key removal position ring nut pin connector 4-pol./ snap-action contact latching NO Au no no cylinder lock 8 pins yes yes Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance max. Bouncing time max. 42 V 0.02 V 00 ma 0.0 ma 00 mω 5 ms Other specifications Operating life (operations) Degree of protection from front side IP65 min. - C max. +70 C Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment Weight according to IEC and 2-30 according to IEC and g Accessories TAST keylock switch Plug-in socket for PCB / Cable (flat ribbon cable 0 cm with socket connector and male quick connector, AMP 4-pin) Blanking cap complete with sealing disc and ring nut, / / Stock items are marked Pushbuttons

12 Accessories TAST keylock switch Label holder, flush, for collar / Flat ribbon cable, 4-wire, m long / Fixing spanner M 5, M / Spare key /0000 Legend label 23 x 6 for label holder, without legend / Socket connector, 4-pin / TAST keylock switch Contact arrangement Contact function Rotating angle Key removal position Colour of lens Order no. complete NO latching 90 0 black opaque /0000 NO latching black opaque /0000 Technical data see page - 30 Included: 2 keys. Pushbuttons Stock items are marked - 3

13 TAST emergency stop pushbutton Pict.: black collar Technical data General information Colour of lens Form of collar Colour of collar Dimensions Length of collar Width of collar Overall height connector Mounting hole Mechanical design Mounting Terminals Contact system Contact function Contact arrangement Contact materials Illuminability Mechanical characteristics Operating force max. Operating travel Switching travel Robustness min. opaque red mm mm 8.5 mm 30.7 mm 33.4 mm 6.2 mm ring nut pin connector 4-pol./ snap-action contact latching 2 NC (forcibly actuated) Au no 0 N 2.6 mm 2 mm 00 N Electrical characteristics Rated voltage AC/DC max. Rated voltage AC/DC min. Rated current AC/DC max. Rated current AC/DC min. Contact resistance max. Bouncing time max. Other specifications Operating life 5000 Degree of protection from front side IP65 min. - C max. +70 C Storage temperature min. -40 C Storage temperature max. +80 C Resistance to constant environment Resistance at variable environment Weight Approvals V 0.02 V A, 00 ma rated current 0.0 ma 00 mω 0 ms according to IEC and 2-30 according to IEC and g TÜV/UL according to EN and -5-/A2, UL 508 Accessories TAST emergency stop pushbutton Plug-in socket for PCB / Cable (flat ribbon cable 0 cm with socket connector and male quick connector, AMP 4-pin) Blanking cap complete with sealing disc and ring nut, / / Label holder, flush, for collar / Stock items are marked Pushbuttons

14 Accessories TAST emergency stop pushbutton Flat ribbon cable, 4-wire, m long / Fixing spanner M 5, M / Legend label 23 x 6 for label holder, without legend / Emergency stop label, yellow, adhesive, round 60 mm, without legend Emergency stop label, yellow, adhesive, round 60 mm, with legend "NOT-AUS" Emergency stop label, yellow, adhesive, round 60 mm, with legend "ARRET-D'URGENCE" Emergency stop label, yellow, adhesive, round 60 mm, with legend "EMERGENCY-STOP" Emergency stop label, yellow, adhesive, round 60 mm, with legend "ARRESTO-D'EMERGENZA" / / / / /0400 Socket connector, 4-pin / TAST emergency stop pushbutton, ring nut fixing Pict.: black collar Contact function Contact arrangement Colour of collar Order no. complete Order no. single parts latching latching 2 NC (forcibly actuated) 2 NC (forcibly actuated) black /030 yellow /030 Technical data see page - 32 Pushbuttons Stock items are marked - 33

15 TAST signal lamp Pict.: red Technical data General information Form of lens Colour of lens Electrical characteristics Voltage limit max. Power limit max. 24 V 0,7 W Dimensions Length of collar Width of collar Overall height connector Mounting hole mm mm 9.8 mm 30.7 mm 33.4 mm 6.2 mm Mechanical design Mounting Terminals pin connector 4-pol./ Lamp socket Bi-Pin T /T / 4 Lamp filament lamp/led Other specifications Degree of protection from front side IP65 Weight 7 g min. - C max. +70 C Storage temperature min. -40 C Storage temperature max. +80 C Accessories TAST signal lamp Filament lamp, Bi-Pin T / 4 base, 2 V / Filament lamp, Bi-Pin T / 4 base, 28 V / LED Bi-Pin T superbright, red, 24 V / LED Bi-Pin T superbright, green, 24 V / LED Bi-Pin T superbright, yellow, 24 V / LED Bi-Pin T superbright, blue, 24 V / LED Bi-Pin T superbright, white, 24 V / LED Bi-Pin T, red, 3 V / Stock items are marked Pushbuttons

16 Accessories TAST signal lamp LED Bi-Pin T, green, 3 V / LED Bi-Pin T, yellow, 3 V / Plug-in socket for PCB / Cable (flat ribbon cable 0 cm with socket connector and male quick connector, AMP 4-pin) / Disassembly tool for TAST, RAFIX / Blanking cap complete with sealing disc and ring nut, / Label holder, flush, for collar / Flat ribbon cable, 4-wire, m long / Fixing spanner M 5, M / Legend insert for illuminated versions /2000 Legend label 23 x 6 for label holder, without legend / Socket connector, 4-pin / Pushbuttons Stock items are marked - 35

17 TAST signal lamp, 24 V, Click quick-assembly feature Pict.: red Voltage limit max. Power limit max. Lamp socket Colour of lens Order no. complete Order no. single parts 24 V 0.7 W Bi-Pin T /T / 4 transparent / / /002 colourless 24 V 0.7 W Bi-Pin T /T / 4 transparent red / / / V 0.7 W Bi-Pin T /T / 4 transparent yellow / / / V 0.7 W Bi-Pin T /T / 4 transparent green / / / V 0.7 W Bi-Pin T /T / 4 transparent blue / / /607 Technical data see page - 34 Accessories: Legend insert for illuminated versions: /2000 Do not press in lens in disassembled condition. Note when using a LED: A notch on the lamp identifies the cathode side. TAST signal lamp, 24 V, ring nut fixing Pict.: blue Voltage limit max. Power limit max. Lamp socket Colour of lens Order no. complete Order no. single parts 24 V 0.7 W Bi-Pin T /T / 4 transparent / / /002 colourless 24 V 0.7 W Bi-Pin T /T / 4 transparent red / / / V 0.7 W Bi-Pin T /T / 4 transparent yellow / / / V 0.7 W Bi-Pin T /T / 4 transparent green / / / V 0.7 W Bi-Pin T /T / 4 transparent blue / / /607 Technical data see page - 34 Accessories: Legend insert for illuminated versions: /2000 Do not press in lens in disassembled condition. Note when using LED: A notch on the lamp socket identifies the cathode side Stock items are marked Pushbuttons