Miggytrac Instruction manual
|
|
- Laura Patrick
- 6 years ago
- Views:
Transcription
1 Miggytrac 1001 Instruction manual GB Valid for serial no. 0536
2 DECLARATION OF CONFORMITY ESAB AB, Welding Equipment, SE Laxå, Sweden, gives its unreserved guarantee that automatic welding machine Miggytrac 1001 from serial number 0536 (2005 w.36) complies with standard EN and EN , in accordance with the requirements of directive (98/37/EEC) and with standard EN and also EN , in accordance with the requirements of directive (2004/108/EEC) Laxå Kent Eimbrodt Global Director Equipment and Automation - 2 -
3 1SAFETY INTRODUcTION General Technical data INSTALLATION General Other connections OPERATION General Start / stop of carriage Welding Magnet MAINTENANCE General Daily As necessary ACCESSORIES ORDERING OF SPARE PARTS DIMENSION DRAWING DIAGRAM SPARE PARTS LIST Rights reserved to alter specifications without notice. TOCe - 3 -
4 1 SAFETY Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who works on or near the equipment observes all the relevant safety precautions. Safety precautions must meet the requirements that apply to this type of welding equipment. The following recommendations should be observed in addition to the standard regulations that apply to the workplace. All work must be carried out by trained personnel well--acquainted with the operation of the welding equipment. Incorrect operation of the equipment may lead to hazardous situations which can result in injury to the operator and damage to the equipment. 1. Anyone who uses the welding equipment must be familiar with: S its operation S location of emergency stops S its function S relevant safety precautions S welding 2. The operator must ensure that: S no unauthorised person is stationed within the working area of the equipment when it is started up. S no--one is unprotected when the arc is struck 3. The workplace must: S be suitable for the purpose S be free from draughts 4. Personal safety equipment S Always wear recommended personal safety equipment, such as safety glasses, flame--proof clothing, safety gloves. S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become trapped or cause burns. 5. General precautions S Make sure the return cable is connected securely. S Work on high voltage equipment may only be carried out by a qualified electrician. S Appropriate fire extinquishing equipment must be clearly marked and close at hand. S Lubrication and maintenance must not be carried out on the equipment during operation. SafE - 4 -
5 WARNING ARC WELDING AND CUTTING CAN BE INJURIOUS TO YOURSELF AND OTHERS. TAKE PRECAU- TIONS WHEN WELDING. ASK FOR YOUR EMPLOYER S SAFETY PRACTICES WHICH SHOULD BE BASED ON MANUFACTURERS HAZARD DATA. ELECTRIC SHOCK - Can kill S Install and earth the welding unit in accordance with applicable standards. S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing. S Insulate yourself from earth and the workpiece. S Ensure your working stance is safe. FUMES AND GASES - Can be dangerous to health S Keep your head out of the fumes. S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone and the general area. ARC RAYS - Can injure eyes and burn skin. S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective clothing. S Protect bystanders with suitable screens or curtains. FIRE HAZARD S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby. NOISE - Excessive noise can damage hearing S Protect your ears. Use earmuffs or other hearing protection. S Warn bystanders of the risk. MALFUNCTION - Call for expert assistance in the event of malfunction. READ AND UNDERSTAND THE INSTRUCTION MANUAL BEFORE INSTALLING OR OPERATING. PROTECT YOURSELF AND OTHERS! SafE - 5 -
6 2 INTRODUCTION 2.1 General Miggytrac 1001 is designed for MIG/MAG welding of plates and beams. It is a compact motor--driven carriage, where in one single operation you can fit a standard welding gun. The welding carriage is powered by an electric motor. It is provided with a 12--pin Burndy socket for connection to a corresponding 23--pin socket on the wire feed units for remote control of the wire feed. The connection is done by way of two prepared control cables, which are plugged directly into the ESAB feed unit. The advantage of this is that you get power supply for the carriage, start and stop functions for the feed unit as well as the possibility of remote control of current and voltage in one and the same cable. No external power is necessary. Miggytrac 1001 is a small compact motor--driven carriage on which an ESAB standard welding gun can easily be fitted. The four driving wheels together with a powerful electro--magnet which is integrated in the chassis of the carriage guarantee smooth and regular operation. The magnet keeps the carriage in the right position in proportion to the foundation, even if you weld on bent plates or use long cable bundles. The magnet is protected behind the stainless steel plate and can be switched off by way of a grip on top of the chassis, when the carriage is going to be moved or cleaned. The carriage follows the weld joint by way of two guide wheels, which are adjusted so as to make the carriage drive diagonally towards the edge of the plate. The carriage is easy to operate with one switch for the travel direction and one knob for the speed. There are separate potentiometers for the remote control. fhc1d1ea - 6 -
7 1. Slide 2. Connection 3. Electro -magnet ON/OFF 4. Driving wheels 5. Electro -magnet 6. Adjustable arm 7. Support wheels 8. Height adjustment 9. Gun bracket 10. Angle adjustment 11. Gun angle adjustment 12. Remote control (Volt/ Amp) 13. Direction Start/stop 14. Travel speed 2.2 Technical data Supply voltage Power Welding speed Dimensions ( l x w x h ) Weight Slide adjustment Remote control socket Max. values, remote control Max. current, start relay Connection Miggytrac VAC 20 W mm/min 266x257x261 mm 7kg +/-- 20 mm Volt and ampere (wire feed) 1 kohm, 0.1 W 2A Burndy, 12 --pin Enclosure class IP 23 Enclosure class The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid objects or water. Equipment marked IP 23 is designed for indoor and outdoor use. fhc1d1ea - 7 -
8 3 INSTALLATION 3.1 General The installation must be executed by a professional. Miggytrac 1001 can be connected to most of ESAB s feed units. For connection to older feed units, please contact your nearest ESAB retailer. In the case of welding at a great distance from the feed unit an intermediate wire feed unit (MEK 25) can be connected. Miggytrac 1001 can also be powered by other welding power sources via a separate transformer, see page 12. For connection of the wire feed unit to Miggytrac 1001, use control cable acc. to Accessories, on page 15. fhc1i1ea - 8 -
9 3.2 Other connections MIGGYTRAC 1001! ESABFeed Miggytrac 1001 is to be connected directly to the remote control socket. No intervention in the feed unit is necessary. ESABFeed 30-2 with control panel M11. Miggytrac 1001 cannot be connected to this feed unit. ESABFeed 30-4 och 48-4 with M12 control panel. It is not possible to adjust the voltage from Miggytrac ESABFeed 30-4 och 48-4 with M13 and M14 control panels. It is possible to adjust both voltage and wire feed from Miggytrac fhc1i1ea - 9 -
10 MIGGYTRAC 1001! AristoFeed with control panel fitted S Dismount the door and fit the sticker (1). S Mount the switch with the cabling (2). S Open the socket for remote control connection (3). S Fit the cabling (4). S Fit the remote control socket on the front panel (5). S Connect the cabling with the printed circuit boards (6). S Fit the printed circuit board at the bottom and then fit the door (7). fhc1i1ea
11 MIGGYTRAC 1001! AristoFeed with U8 S Dismount the door (1). S Open the socket for remote control connection (2). S Fit the cabling (3). S Fit the remote control socket on the front panel (4). S Mount the switch with the cabling on the printed circuit board (5). S Connect the cabling with the printed circuit boards (6). S Fit the printed circuit board at the bottom and then fit the door (7). fhc1i1ea
12 Miggytrac 1001! other feed unit makes When connecting Miggytrac 1001 to other feed units, use the transformer and the control cable you find under Accessories on page kohm F G = Start / Stop function J = Reference + K = Reference welding voltage L = Reference 0 M = Reference wire feed speed A B = Voltage feed fhc1i1ea
13 4 OPERATION 4.1 General General safety regulations for the handling of the equipment can be found on page 4. Read through before you start using the equipment! S S S Place Miggytrac 1001 at the weld joint. Adjust the arms so that the carriage runs diagonally towards the edge of the plate. When the magnet is activated the friction between the drive wheels and the foundation increases, resulting in a more stable carraiage, despite its low weight. The magnet is switched On/Off using a twist grip on top of the chassis. 4.2 Start / stop of carriage 4.3 Welding Travel direction, left Stop Travel direction, Right Selection whether to start/stop the connected feed unit with the switch on the carriage or not. On Off 4.4 Magnet On Off Twist grip switching the built--in magnet On/Off (raising and lowering). When the carriage is not in use the magnet should be switched off. fhc1o1ea
14 5 MAINTENANCE 5.1 General Note: All warranty undertakings given by the supplier cease to apply if the customer attempts to rectify any faults on the machine during the warranty period. 5.2 Daily S S S Check that all cables and plugs are in good condition. Switch off the magnet and clean the bottom of the carriage. Clean the guide wheels. 5.3 As necessary S S Replace the O--rings ( 8 pcs. ) on the driving wheels. Lubricate the guide wheels using thin oil. fhc1m1ea
15 6 ACCESSORIES Control cable 23 -p ESABFeed 30-4 M12 ESABFeed 30-4 M13 ESABFeed 30-4 M14 ESABFeed 48-4 M12 ESABFeed 48-4 M13 ESABFeed 48-4 M14 AristoFeed with adapter x x x Control cable 23 -p Cable kit, remote control socket 23 -p MEK 4 MEK 4SP MEK 4C MEK 44C MED 44A x x x x x x x x x x Control cable 4-p, 12-p Cable kit Control cable 4 -p Control cable Transformer MEH 30 MEH 44 MED44B MEK 2 Universal x x x x x x x x x x Welding screen Bracket for water -cooled PSF ORDERING OF SPARE PARTS Miggytrac 1001 is designed and tested in accordance with the international and European standards IEC/EN , ISO/EN and IEC/EN It is the obligation of the service unit which has carried out the service or repair work to make sure that the product still conforms to the said standard. Spare parts are ordered through your nearest ESAB representative, see back cover. When ordering spare parts, please state machine type and number as well as designation and spare part number as shown in the spare parts list on page 19. This will simplify dispatch and ensure you get the right part. fhc1a1ea
16 Dimension drawing fhc1dim
17 Diagram SW1 SW2 fhc1diag
18 sida
19 Spare parts list Edition spare
20 Item no. Qty Ordering no. Denomination Notes Miggytrac O-ring Wheel Axes with sprocket Slide screw with knob Switch box 6a Knob 6b Potentiometer speed 6c Label, speed Switch, direction Switch, welding Potentiometer knob Vertical slide house Intermediate bracket Lever Knob, slides 14 Magnetic lifting device Chassis Bottom cover Nut El. motor with gear Guide arm PC board Magnet unit complete Chain tightener Chain Arm Guide wheel Welding gun bracket Spatter screen Chassis plug 12 -pol miggy
21 miggy
22 ESAB subsidiaries and representative offices Europe AUSTRIA ESAB Ges.m.b.H Vienna -Liesing Tel: Fax: BELGIUM S.A. ESAB N.V. Brussels Tel: Fax: THE CZECH REPUBLIC ESAB VAMBERK s.r.o. Vamberk Tel: Fax: DENMARK Aktieselskabet ESAB Herlev Tel: Fax: FINLAND ESAB Oy Helsinki Tel: Fax: FRANCE ESAB France S.A. Cergy Pontoise Tel: Fax: GERMANY ESAB GmbH Solingen Tel: Fax: GREAT BRITAIN ESAB Group (UK) Ltd Waltham Cross Tel: Fax: ESAB Automation Ltd Andover Tel: Fax: NORWAY AS ESAB Larvik Tel: Fax: POLAND ESAB Sp.zo.o. Katowice Tel: Fax: PORTUGAL ESAB Lda Lisbon Tel: Fax: SLOVAKIA ESAB Slovakia s.r.o. Bratislava Tel: Fax: SPAIN ESAB Ibérica S.A. Alcalá de Henares (MADRID) Tel: Fax: SWEDEN ESAB Sverige AB Gothenburg Tel: Fax: ESAB international AB Gothenburg Tel: Fax: SWITZERLAND ESAB AG Dietikon Tel: Fax: North and South America ARGENTINA CONARCO Buenos Aires Tel: Fax: BRAZIL ESAB S.A. Contagem -MG Tel: Fax: Asia/Pacific CHINA Shanghai ESAB A/P Shanghai Tel: Fax: INDIA ESAB India Ltd Calcutta Tel: Fax: INDONESIA P.T. ESABindo Pratama Jakarta Tel: Fax: JAPAN ESAB Japan Tokyo Tel: Fax: MALAYSIA ESAB (Malaysia) Snd Bhd Selangor Tel: Fax: SINGAPORE ESAB Asia/Pacific Pte Ltd Singapore Tel: Fax: SOUTH KOREA ESAB SeAH Corporation Kyungnam Tel: Fax: UNITED ARAB EMIRATES ESAB Middle East FZE Dubai Tel: Fax: Representative offices BULGARIA ESAB Representative Office Sofia Tel/Fax: EGYPT ESAB Egypt Dokki -Cairo Tel: Fax: ROMANIA ESAB Representative Office Bucharest Tel/Fax: RUSSIA LLC ESAB Moscow Tel: Fax: LLC ESAB St Petersburg Tel: Fax: Distributors For addresses and phone numbers to our distributors in other countries, please visit our home page HUNGARY ESAB Kft Budapest Tel: Fax: ITALY ESAB Saldatura S.p.A. Mesero (Mi) Tel: Fax: THE NETHERLANDS ESAB Nederland B.V. Amersfoort Tel: Fax: CANADA ESAB Group Canada Inc. Missisauga, Ontario Tel: Fax: MEXICO ESAB Mexico S.A. Monterrey Tel: Fax: USA ESAB Welding & Cutting Products Florence, SC Tel: Fax: ESAB AB SE LAXÅ SWEDEN Phone
Miggytrac B501. Instruction manual GB Valid for: serial no xxxx
Miggytrac B501 Instruction manual 0463 404 001 GB 20150116 Valid for: serial no. 1501 xxxx TABLE OF CONTENTS 1 SAFETY... 4 2 INTRODUCTION... 6 3 TECHNICAL DATA... 7 4 INSTALLATION... 8 4.1 Assembly...
More informationreplacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
More informationESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC
6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial
More informationPSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
More informationProfessional 250. Caddyt. Instruction manual
GB Professional 250 Caddyt Instruction manual 0457 552 301 GB 060814 Valid for serial no. 632 -xxx -xxxx 1 DIRECTIVE... 3 2SAFETY... 3 3 INTRODUCTION... 5 4 TECHNICAL DATA... 5 4.1 Equipment... 5 4.2 Field
More informationOrigoMig 405. Instruction manual
OrigoMig 405 Instruction manual 0349 301 084 060310 Valid for serial no. 410 ENGLISH 1 DIRECTIVE........................................................ 3 2 SAFETY...........................................................
More informationCoolMidi Instruction manual
GB CoolMidi 1800 Instruction manual 0459 870 001 GB 100811 Valid for serial no. 607-xxx-xxxx 1 DIRECTIVE........................................................ 3 2 SAFETY...........................................................
More informationTig 3000i. Origot. Instruction manual
GB Tig 3000i Origot Instruction manual 0459 943 101 GB 080328 Valid for serial no. 802 -xxx -xxxx 1 DIRECTIVE... 3 2SAFETY... 3 3 INTRODUCTION... 5 3.1 Equipment... 5 3.2 Control panel... 5 4 TECHNICAL
More informationPARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
More informationCaddy 140 Caddy 200 LHN 140, LHN 200. Instruction manual. Valid for serial no xxx -xxxx, 011 -xxx -xxxx, 220 -xxx -xxxx GB
GB Caddy 140 Caddy 200 LHN 140, LHN 200 cmha2p00 Instruction manual 0468 964 101 GB 041101 Valid for serial no. 628 -xxx -xxxx, 011 -xxx -xxxx, 220 -xxx -xxxx 1 DIRECTIVE... 3 2SAFETY... 3 3 INTRODUCTION...
More informationEMS215ic, EMP215ic, EM215ic
EMS215ic, EMP215ic, EM215ic Spare parts list 0463 412 001 GB 20170126 Valid for: serial no. 552, 615-xxx-xxxx Ordering number Product Notes 0558 102 239 EMS 215ic Bobbin Ø4-8" (100-200 mm). CSA/Bayonet
More informationPRC PRC PRC
PRC 17-49 PRC 33-90 PRC 60-170 A21 Instruction manual 0443 934 201 GB 061219 Valid for serial no. 538 -xxx -xxxx 1 DIRECTIVE... 3 2SAFETY... 3 3 INTRODUCTION... 4 4 TECHNICAL DATA... 5 5 INSTALLATION...
More informationLKA 150. clka0p00. Instruction manual
LKA 150 104 clka0p00 Instruction manual 0349 301 001 040928 Valid for serial no. 923 xxx xxxx ENGLISH 1 DIRECTIVE........................................................ 3 2 SAFETY...........................................................
More informationBuddy. Arc 145. Instruction manual
Buddy Arc 145 Instruction manual 0463 276 001 GB 20120118 Valid for serial no. 01107071701 - 2 - 10 SAFETY... 4 11 INTRODUCTION... 6 11.1 Equipment... 6 12 TECHNICAL DATA... 6 13 INSTALLATION... 7 13.1
More informationCaddy. Arc 251i GB Valid for serial no. 810-xxx-xxxx
GB Caddy Arc 251i Instruction manual 0460 324 101 GB 20130322 Valid for serial no. 810-xxx-xxxx - 2 - 1 S A F E T Y... 2 INT R ODUC T ION... 6 2.1 Equipment.......... 6 2.2 Control panel A32, A34.......
More informationOrigo. Tig 3000i AC/DC. Instruction manual
GB Origo Tig 3000i AC/DC Instruction manual 0459 942 101 GB 20121105 Valid for serial no. 802-xxx-xxxx, 039-xxx-xxxx - 2 - 1 SAFETY... 4 2 INTRODUCTION... 6 2.1 Equipment... 6 2.2 Control panel... 6 3
More informationBuddy. Arc 400i Arc 400i XC. Instruction manual GB Valid for serial no. 203-xxx-xxxx, 204-xxx-xxxx
Buddy Arc 400i Arc 400i XC Instruction manual 0463 333 074 GB 20120409 Valid for serial no. 203-xxx-xxxx, 204-xxx-xxxx 1 SAFETY... 3 2 INTRODUCTION... 5 2.1 Equipment......5 2.2 VRD.....5 3 TECHNICAL DATA
More informationBuddy. Arc 145. Instruction manual GB Valid for: serial no
Buddy Arc 145 Instruction manual 0463 276 001 GB 20150424 Valid for: serial no. 01107071701 TABLE OF CONTENTS 1 SAFETY... 4 2 INTRODUCTION... 7 2.1 Equipment... 7 3 TECHNICAL DATA... 8 4 INSTALLATION...
More informationOrigo. Mig 410 Mig 510. Instruction manual
GB Origo Mig 410 Mig 510 Instruction manual 0463 275 001 GB 20120823 Valid for serial no. 627-xxx-xxxx, 122-xxx-xxxx - 2 - 1 SAFETY... 4 2 INTRODUCTION... 6 2.1 Equipment... 6 3 TECHNICAL DATA... 7 4 INSTALLATION...
More informationOrigo. Tig 3000i AC/DC. Instruction manual GB Valid for: 039-xxx-xxxx
Origo Tig 3000i AC/DC Instruction manual 0459 942 201 GB 20170502 Valid for: 039-xxx-xxxx TABLE OF CONTENTS 1 SAFETY... 4 1.1 Meaning of symbols... 4 1.2 Safety precautions... 4 2 INTRODUCTION... 7 2.1
More informationRoboFeed 3004HW FeedControl 3004HW
Aristo RoboFeed 3004HW FeedControl 3004HW Instruction manual 0463 280 201 GB 20140710 Valid for: serial no. 325-xxx-xxxx, 410-xxx-xxxx TABLE OF CONTENTS 1 SAFETY... 4 2 INTRODUCTION... 7 2.1 Equipment...
More informationCaddy. Tig 1500i, Tig 2200i. Instruction manual GB Valid for: serial no. 803-xxx-xxxx to 927-xxx-xxxx
Caddy Tig 1500i, Tig 2200i Instruction manual 0460 443 201 GB 20131001 Valid for: serial no. 803-xxx-xxxx to 927-xxx-xxxx TABLE OF CONTENTS 1 SAFETY... 4 2 INTRODUCTION... 7 2.1 Equipment... 7 2.2 Control
More informationTig 3001i, Tig 3001iw
Origo Tig 3001i, Tig 3001iw Instruction manual 0460 742 001 GB 20170310 Valid for: serial no. 840-xxx-xxxx, 950-xxx-xxxx, 039-xxx-xxxx TABLE OF CONTENTS 1 SAFETY... 4 1.1 Meaning of symbols... 4 1.2 Safety
More informationAristo. Tig 4000i. Instruction manual GB Valid for serial no. 802-xxx-xxxx, 803-xxx-xxx. 950-xxx-xxxx
GB Aristo Tig 4000i Instruction manual 0458 640 301 GB 20110720 Valid for serial no. 802-xxx-xxxx, 803-xxx-xxx. 950-xxx-xxxx - 2 - 1 SAFETY........................................................... 4
More informationAristo. Mig 5000i. 400 V version. Instruction manual GB Valid for serial no. 802-xxx-xxxx, 803-xxx-xxxx, 950-xxx-xxxx
GB Aristo Mig 5000i 400 V version Instruction manual 0459 290 301 GB 20110816 Valid for serial no. 802-xxx-xxxx, 803-xxx-xxxx, 950-xxx-xxxx - 2 - 1 SAFETY...........................................................
More informationOrigo M08, Origo M09. Feed L302 Feed L304. Instruction manual
GB Origo M08, Origo M09 Feed L302 Feed L304 Instruction manual 0459 508 101 GB 20120621 Valid for serial no. 620-xxx-xxxx -2- 1 SAFETY... 4 2 INTRODUCTION... 6 2.1 Equipment... 6 3 TECHNICAL DATA... 6
More informationMig C141/ C151 Mag C171/ C201/ C251
GB Origo Mig C141/ C151 Mag C171/ C201/ C251 Instruction manual 0463 326 001 GB 20120528 Valid for serial no. 736-xxx-xxxx - 2 - 1 SAFETY... 4 2 INTRODUCTION... 6 2.1 Equipment... 6 3 TECHNICAL DATA...
More informationPT-32EH PLASMA ARC CUTTING TORCHES. Instruction Manual (GB)
PT-32EH PLASMA ARC CUTTING TORCHES Instruction Manual (GB) 0558003746 BE SURE THIS INFORMATION REACHES THE OPERATOR. YOU CAN GET EXTRA COPIES THROUGH YOUR SUPPLIER. These INSTRUCTIONS are for experienced
More informationPowercut Instruction manual
Powercut 1600 Instruction manual 0449 551 001 GB 101222 Valid for serial no. 034-xxx-xxxx - 2 - 1 SAFETY........................................................... 4 2 INTRODUCTION...................................................
More informationCaddy. Mig C200i ARC WELDING SUPPLIES Instruction manual
Caddy Mig C200i Instruction manual 0440 001 001 GB 111107 Valid for serial no. 932-xxx-xxxx - 2 - 1 SAFETY........................................................... 4 2 INTRODUCTION...................................................
More informationSlide. Instruction manual
A6 Slide Instruction manual 0443 394 101 GB 110301 Valid for serial no. 035-xxx-xxxx DECLARATION OF CONFORMITY In accordance with; the Machinery Directive 2006/42/EC the EMC Directive 2004/108/EC Type
More informationMig 5000i, Mig 5000i WeldCloud 400 V
Aristo Mig 5000i, Mig 5000i WeldCloud 400 V Instruction manual 0459 290 401 GB 20171107 Valid for: 608-, 613-xxx-xxxx TABLE OF CONTENTS 1 SAFETY... 5 2 INTRODUCTION... 8 2.1 Equipment... 8 3 TECHNICAL
More informationCaddy. Tig 2200i AC/DC. Instruction manual GB Valid for: serial no. 711-, 747-xxx-xxxx
Caddy Tig 2200i AC/DC Instruction manual 0460 225 301 GB 20180920 Valid for: serial no. 711-, 747-xxx-xxxx TABLE OF CONTENTS 1 SAFETY... 4 1.1 Meaning of symbols... 4 1.2 Safety precautions... 4 2 INTRODUCTION...
More informationESABMig C280 ESABMig C340
ESABMig C280 ESABMig C340 Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung Manuel d instructions Gebruiksaanwijzing Instrucciones de uso Istruzioni per l uso
More informationTransmatic 4C. Instruction manual and spare parts list
GB Transmatic 4C Instruction manual and spare parts list 0459 706 074 090514 Valid for serial no. 435 -xxx -xxxx 1 DIRECTIVE... 3 2SAFETY... 3 3 INTRODUCTION... 4 3.1 Equipment... 5 4 TECHNICAL DATA...
More informationA6 VEC. Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung
A6 VEC 101103105107109111102021110025108024042106023061104022041100020040060001 Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung Manuel d instructions Gebruiksaanwijzing
More informationMEK 25. Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung
MEK 25 101103105107109111102021110025108024042106023061104022041100020040060001 Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung Manuel d instructions Gebruiksaanwijzing
More informationA6 GMD. Joint tracking equipment. Simplified service manual
A6 GMD Joint tracking equipment Simplified service manual 333 533-011 9704 LIST OF CONTENTS Page TECHNICAL DESCRIPTION... 4 INSTALLATION... 8 OPERATION... 10 MAINTENANCE... 12 DIMENSION DRAWING... 13 DIAGRAM...
More informationLAF 635. Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung
LAF 635 101103105107109111102021110025108024042106023061104022041100020040060001 Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung Manuel d instructions Gebruiksaanwijzing
More informationPT-32EH Plasmarc Cutting Torches
PT-32EH Plasmarc ting Torches Instruction Manual (EN) 0558003746 Be sure this information reaches the operator. You can get extra copies through your supplier. caution These INSTRUCTIONS are for experienced
More informationDOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
More informationA2 S Mini Master A2 S G Master
A2 S Mini Master A2 S G Master A2 SFE1 / A2 SGE1 101103105107109111102021110025108024042106023061104022041100020040060001 Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationPacking Data Installation Instructions
Packing Data PK Installation Instructions This document describes how to install a Dataliner DL10 display in a panel or enclosure and connect power. European Union Directive Compliance wiring and safety
More informationDrive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
More informationInstallation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationRoll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
More informationBP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationCrimpTest-1 kn. Calibration Bracket
CrimpTest-1 kn Calibration Bracket 431-471-02 May 2017 CrimpTest-1 kn Calibration Bracket Manual This manual describes the operation of the calibration test rig part no. 432-671, for the purpose of checking
More informationMEH 30 Basic MEH 44 Basic
MEH 30 Basic MEH 44 Basic 0030507090202002508024042060230604022040002004006000 Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung Manuel d instructions Gebruiksaanwijzing
More informationExtraction arms for every type of application
1 Extraction arms for every type of application 2 Improved workspaces within arm s reach A workspace free from dust, hazardous particles, fumes and exhaust is good in many ways. It improves the working
More informationPotential Danger of Fire or Explosion Read this letter now!
Elster GmbH Postfach 28 09 49018 Osnabrück Strotheweg 1 49504 Lotte (Büren) Deutschland Tel. +49 541 1214-0 Fax +49 541 1214-370 hts.lotte@honeywell.com ThermalSolutions.honeywell.com Potential Danger
More informationGlobal Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
More informationInfographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationSingle-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
More informationPREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
More information7 NK 72 en Issue 12/99 LIMIT SWITCHES. Series NK700 INSTALLATION, MAINTENANCE AND OPERATING INSTRUCTIONS
7 NK 72 en Issue 12/99 LIMIT SWITCHES Series NK700 INSTALLATION, MAINTENANCE AND OPERATING INSTRUCTIONS 2 Table of Contents 1 INTRODUCTION..................... 3 1.1 General description......................
More informationMig 4002c Mig 5002c Mig 6502c
Origo Mig 4002c Mig 5002c Mig 6502c Instruction manual 0463 299 187 GB 20130924 Valid for: 946-xxx-xxxx, 947-xxx-xxxx, 948-xxx-xxxx TABLE OF CONTENTS 1 USER RESPONSIBILITY... 3 2 SAFETY PRECAUTIONS...
More informationEuropean Hotel Review
United Kingdom United States Blue Fin Building 735 East Main Street 110 Southwark Street Hendersonville London SE1 0TA TN 37075 Phone: +44 (0)20 7922 1930 Phone: +1 (615) 824 8664 Fax: +44 (0)20 7922 1931
More informationSTEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
More informationSpare Parts List Series VP04 Pneumatic Remote Control Valve
Pneumatic Remote Control Valve Publication No HY17-8820/UK July 2004 Conversion factors 1 kg = 2.2046 lb 1 N = 0.22481 lbf 1 bar = 14.04 psi 1 l = 0.21997 UK gallon 1 l = 0.26417 US gallon 1 cm = 0.061024
More informationSTEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
More informationThe new STx chain hoist NEW. Sophisticated technology prepared for the future
The new STx chain hoist 03.2018 NEW Sophisticated technology prepared for the future The new STx chain hoist Sophisticated technology prepared for the future Our experts have undertaken to keep reviewing
More informationLifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
More informationKnife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
More informationSpain s exports by oil product group and country of destination
Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es February 13 th 2017 Spain s exports by oil product
More informationPLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
More informationSpain s exports by oil product group and country of destination. Year Corporación de Reservas Estratégicas de Productos Petrolíferos
Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es July 13 th 2015 Spain s exports by oil product
More informationSBS-Control. Table of contents. Operating Instructions BKS24-9A. Operating Instructions
Operating Instructions BKS24-9A Operating Instructions BKS24-9A Table of contents Operating Instructions 1 Operating controls and indicators 2 2 Preparations for faultless commissioning and operating 3
More informationRailtrac F1000/ FR1000. Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung
Railtrac F1000/ FR1000 101103105107109111102021110025108024042106023061104022041100020040060001 Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung Manuel d instructions
More informationKnife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
More information1. General company data
Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:
More informationSpain s imports by oil product group and country of origin
Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es September 12 th 2018 Spain s imports by oil product
More informationUView Mini Transilluminator
UView Mini Transilluminator Instruction Manual Catalog #166-0531 Hardware Instruction Manual The UView mini transilluminator is suitable for research use only. It must be used by specialized personnel
More information67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production
Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed
More informationSpare Parts List PCL4 01/02/04/05
PCL 01/02/0/0 Hydraulic Proportional Remote Control Valve Series Publication No HY17-13/UK April 200 Conversion factors 1 kg = 2.20 lb 1 N = 0.221 lbf 1 bar = 1.0 psi 1 l = 0.21997 UK gallon 1 l = 0.217
More informationIwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type)
Iwaki Electromagnetic Metering Pump EWN-R (Chlorine Dioxide type) Instruction manual Thank you for choosing our product. Please read through this instruction manual before use. This manual is intended
More informationPLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and roust. TRIAC AT features Suitale for the work site Closed loop controlled temperature Open loop controlled air volume Intelligent «e-drive» operating unit
More informationAllen-Bradley 1397 Pulse Encoder Interface Card
Installation Instructions IN Allen-Bradley 1397 Pulse Encoder Interface Card Cat. No. 1397-PE Table of Contents What This Option Provides........................ 1 Where This Option Is Used........................
More information1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area
1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationAristotig 255 AC/DC DTE 255. Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung Manuel d instructions
Aristotig 255 AC/DC DTE 255 112101103105107109111102021110025108024042106023061104022041100020040060001 Bruksanvisning Brugsanvisning Bruksanvisning Käyttöohjeet Instruction manual Betriebsanweisung Manuel
More informationDIGI-CUT 40PFC MV. Part No. 9030H OPERATOR S MANUAL
DIGI-CUT 40PFC MV Part No. 9030H OPERATOR S MANUAL IMPORTANT Read this Owner s Manual completely before attempting to use this equipment. Save this manual and keep it handy for quick reference. Pay particular
More informationFork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
More informationStainless Steel Cable Ties
Stainless Steel Cable Ties Stainless Steel Cable Ties from Tyco Electronics Ranges Available: Ball Lock coated and uncoated material grade AISI 316 - Smooth entry & easy threading of tie body - Self-locking
More informationWL SPARE PARTS. conveyor systems
WL SPARE PARTS conveyor systems Spare parts Conveyor system WL 2 FlexLink Spare parts catalogue Spare parts Conveyor system WL Copyright FlexLink 2012 The contents of this publication are the copyright
More informationOPERATION INSTRUCTIONS
www.r-techwelding.co.uk Email: sales@r-techwelding.co.uk Tel: 01452 733933 Fax: 01452 733939 ProArc 175 INVERTER ARC WELDER OPERATION INSTRUCTIONS Version 2017-10 2 3 Thank you for selecting the R-Tech
More informationtesting to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359
More informationTOP SMART intelligent position monitor:
TOP SMART intelligent position monitor: Air Torque also manufacture the Top smart intrinsically safe compact valve position monitor with integrated diagnostics, self calibrating limit switches, integrated
More informationPlants. ColdMix Mobile/Semi-mobile and stationary plants. With productive capacity of t/h
Plants ColdMix Mobile/Semi-mobile and stationary plants With productive capacity of 130 400 t/h Cold Mix 130 400 t/h Flexible, pure and simple : The continuous cold mixing plant Both mobile and stationary
More informationFork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
More informationTotal credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
More informationUniversal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. Description 1.1. Function The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen
More informationD6.. Butterfly valves. For controlled operation.
D6.. Butterfly valves. For controlled operation. Water is our element. www.belimo.eu Total solutions for medium and large volumetric flows. Butterfly valves from Belimo are available as classical D6..N
More information-Shape the Future with Manufacturing Technology
-Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany
More informationCeram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it.
2 Features Valve options Accessories Ceram 4-way Pneumatic Directional Control Valve Tough enough to survive, no matter where in the world you send it. The secret s a ceramic seal. Inside the valve a pair
More information