Printed Board Cemented Joint Program Based on UL/IEC and IEC
|
|
- Charles Walton
- 6 years ago
- Views:
Transcription
1 Printed Board Cemented Joint Program Based on UL/IEC and IEC Presented by Crystal Vanderpan Principal Engineer, Printed Circuit Technologies and PV Materials Underwriters Laboratories Inc.
2 Crystal Vanderpan Principal Engineer for Printed Circuit Technologies and PV Materials Joined UL in 1995 UL s Technical Rep for UL PWB and PV Material Standards IEC TC82, WG2 PV Materials project team leader Subcommittee Chairman of ASTM D09.07, Electrical and Electronic Insulating Materials BS degree in Chemical Engineering and Materials Science from University of California - Davis 2
3 Agenda Introduction Background on End Product Standards End Product Requirement for Printed Boards UL Certification Programs for Printed Boards 3
4 Introduction
5 History of Underwriters Laboratories 1894 founded by William H. Merrill Opens Underwriters Electrical Bureau, the Electrical Bureau of the National Board of Fire Underwriters in Chicago, Ill., USA First test conducted on a non-combustible insulation material 7,024 employees now located throughout the globe Working for a Safer World 5
6 UL s Global Organization Major Test Laboratories North America United States - Camas - Northbrook - Melville - Materials Lab - Research TP - San Jose - Materials Lab Canada Latin America Argentina Brazil Mexico Europe Denmark Finland France Germany - Materials Lab Italy Netherlands Poland Spain Sweden Switzerland United Kingdom Asia China (2012) - Materials Lab Hong Kong India Japan Malaysia New Zealand Singapore South Korea Taiwan - Materials Lab 6
7 Third Party Safety Testing Why safety testing? To prevent risk of electric shock, fire or injury to persons Why third party? More confidence to customers and/or consumers Better market access Lower insurance fees 7
8 Miniature Linear Switcher Planar
9 Prepreg Core Laminate Prepreg Core Laminate Prepreg
10 Background on End Product Standards
11 IEC TC108 Safety of Electronic Equipment within the Field of Audio/Video, Information Technology and Communication Technology Responsible for the following key equipment standards: IEC 60065, Audio, Video and Similar Electronic Apparatus: - Audio/Video equipment, including consumer electronics IEC , Information Technology Equipment: - Information Technology Equipment (ITE) and Office Appliances - Communication Technology Equipment, aka, telecommunication equipment IEC , Audio/Video, Information Technology and Communication Technology Equipment: - Combines above two only in scope and uses new hazard-based safety engineering (HBSE) approach
12 Key Considerations UL/IEC & IEC are equipment (systems) safety standards Component requirements, such as printed boards, are derived from applicable parts of the Standard, thus may not always be as clear as component manufacturers would like.
13 Approach High level discussion of parallel requirements in & IEC requirements generally are aligned with for PWBs, so will concentrate on since it is more prevalent Core requirements are IEC-based, disagreements with the IEC-based end product requirements ultimately should be addressed with IEC TC108 via: ANSI US TAG TC108 (or appropriate National Committee), and/or IEC (e.g., TC91, Electronics Assembly Technology). US TAG TC108 leadership always open to membership/participation by component manufacturers! 13
14 End Product Requirements for PWBs
15 Hazard-Based Engineering Approach Analyze the installation Location and intended use Attachment systems, wiring systems, hazards Analyze the product Materials, construction, hazards Utilize existing standards & knowledge Standards may exist for similar products / situations Code requirements may exist Test to provide confidence
16 Printed Board Hazards in End Products Two main hazards (energy sources) addressed by printed board requirements: Risk of Fire (Electrically-caused fire) - Material flammability Risk of Electric Shock (Electrically-cause injury) 1. Outside Surfaces 2. Inter Layer (layer-to-layer) 3. Intra Layer (within same layer) National Differences (ND) require printed boards used as safety critical components comply with UL 796
17 Risk of Fire In general, the risk of fire is addressed by either: The risk of ignition is reduced by: - Limit the maximum temperature of components under normal operating conditions and after a single fault, or - Limit the power available in a circuit, or - Performing intensive fault testing (e.g., open-/short-circuit all relevant components). The spread of flame in the event of ignition is controlled by: - Use of flame retardant materials (control of fuel), or - Use of flame retardant insulation (control of thermal coupling), or - Use of physical separation (e.g., distance).
18 Options for Demonstrating Fire Compliance Three (3) options for printed boards to demonstrate compliance for fire safety: 1. Printed board rated V-1 or better; 2. Printed board rated V-2; 3. Printed board rated HB.
19 Options for Demonstrating Fire Compliance (cont ) Printed board rated V-1 or better Most beneficial option to ODMs/OEMs: Allows ODMs/OEMs to have no investigation of individual components on board - Such as IC packages, optocoupler packages, passive components and other small parts - Standard assumes ignition/fire will be localized In high-tech applications, most printed boards are V-0, so the practice meets minimum requirement. - NOTE VTM-0, -1, and -2 CLASS MATERIALS are considered equivalent to V-0, -1, and -2 CLASS MATERIALS, respectively, but only for flammability property Electrical & mechanical properties are not necessarily equivalent
20 Risk of Electric Shock The risk of electric shock is reduced by provision of insulation If the insulation fails, hazardous voltage may be present to operator access area or accessible conductive parts or circuits Insulation Breakdown Accessible Conductive Parts Insulation
21 Options for Demonstrating Shock Compliance & Clearance & Creepage Distance requirements based on IEC series standards IEC TC109, Insulation co-ordination for low-voltage equipment Horizontal safety function IEC TC109 also responsible for: - IEC : Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests - IEC : Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution - IEC : Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm 21
22 Options for Demonstrating Shock Compliance Three (3) applications need to determine suitable spacings: (a) Conductors on outside surfaces (b) Conductors on different layers (inter-layer, or between layers) (c) Conductors on same layers (intra-layer, or same layer) 22
23 Conductors on Same Layer Reduced spacings: Design for distances between circuits on same inner layer Solid insulation allowed for Basic or Reinforced Insulation - Distance through Insulation - Basic: distance acceptable that passes the Electric Strength test - Reinforced: 0.4 mm, minimum Performance criteria: - Thermal cycling, followed by, Humidity conditioning & Electric strength - External inspection: No cracks or delamination 0.4 mm
24 Conductors on Same Layer Test voltages of Electric strength dependent on: Circuit Type (Primary or Secondary), Working Voltage, and Insulation Grade (e.g., Basic or Reinforced) Representative Test Voltages (ac, rms) between circuits for printed boards used in Primary Circuits, and between Primary Circuits and Secondary Circuits Insulation Grade WV 210 Vpk or dc WV 420 Vpk or dc WV 1.41k Vpk or dc Basic Table 5B Reinforced
25
26 UL Certification Programs for Printed Boards
27 UL Certification Programs for PWBs Standard & Category: UL 796, Printed Wiring Boards ZPMV2, Printed Wiring - Component Adjunct Program: Cemented Joint Program per to meet reduced spacings (distance thru insulation) on same inner layer of a multilayer PWB 27
28 Cemented Joint Program per Program Objective: Allow ITE End product to pre-select boards that comply with IEC cemented joint requirements (within stated parameters) so lengthy end product performance testing (e.g., 30 day thermal cycling) is not required. Assumptions: Insulation Grade: Reinforced Insulation (default) or Basic Insulation (upon need) Overvoltage Category: II Evaluation is part of new board evaluation or additional evaluation of existing UL796 board construction 28
29 Cemented Joint Program per Required Information from PWB manufacturer: Recognized MOT > 90C - For printed boards made of pre-preg, standard only requires special performance tests if the printed board temperature exceeds 90 C. AC or DC Mains application - AC mains, default Maximum Working Voltage - or V dc Distance Through Insulation (DTI) Note - Min 0.4mm minimum is applicable to Reinforced insulation, i.e., printed board manufacturer can request any distance 0.4mm or greater and UL will qualify the construction for that distance. Distances less than 0.4 mm can only be qualified for Basic insulation. 29
30 Cemented Joint Program per Samples required from PWB manufacturer: Eleven (11) coupons per UL specification (layout) One (1) sample for Microsectioning to measure the spacing Five (5) samples for thermal-cycling, humidity conditioning and electric strength Five (5) samples for thermal-cycling and electric strength Sample Coupon A sample coupon is available. It includes multiple DTI options. Reinforced insulation requires meeting both construction (min. 0.4 mm DTI) and performance criteria. 30
31 Test Flow Test Start 11 samples Measure Spacing (MSA for 1 Sample) 5 samples 5 samples Thermal Cycling (x 10 times): 1. T1 ± 2 C x 68 hrs C ± 2 C x 1 hr 3. 0 C ± 2 C x 2 hrs C ± 2 C x > 1 hr Thermal Cycling (x 10 times) 1. T1 ± 2 C x 68 hrs C ± 2 C x 1 hr 3. 0 C ± 2 C x 2 hrs C ± 2 C x > 1 hr Humidity Condition C ± 2 C, 93 ± 2% RH x 48 hrs Dielectric Strength Test (V) T1 = MOT+10 o C V Default Voltage is 3000 x 1.6 = 4800 V Dielectric Breakdown? Visual Check or MSA verify Data Recording 31
32 Sample Coupon with Different DTI (pattern-to-pattern) 32
33 Sample Coupon Actual Sample 33
34 PWB Construction for the Test Coupon (pattern-to-pattern) Prepreg # Max Int. Cu Minimum Laminate Core Max Int. Cu Prepreg # Cu Plating for PTH Ext. Cu # - Prepreg need to use at least one minimum individual prepreg to build-up to the minimum overall build-up dielectric thickness. Prepreg ply number and prepreg thickness are not limited, for example: or , depend on DFM (Design for Manufacturing). 34
35 Example of Actual Sample Microsection Distance Through Insulation Spacing: 0.25 mm 35
36 Cemented Joint Program per Published UL Report/Certification will specify: Rated Board MOT Insulation Grade (Reinforced) AC Mains (default) or DC Mains Maximum Working Voltage Minimum DTI (minimum 0.4 mm for reinforced insulation) Electric Strength Value (minimum 4800 Vrms for reinforced insulation used in primary circuit) Note: A test voltage of 4800 V rms corresponds to a maximum 1550 Vpk working voltage per Table 5B, Part 2. 36
37 Cemented Joint Program : Example scenario Construction: Requirement: Product rating (AC Mains): PWB: Working Voltage: DTI: Electric Strength Value: Planar transformer with primary & secondary (SELV) winding on same inner layer. Reinforced insulation required between Primary & SELV circuits Vac R/C PWB rated 130 C (MOT) Maximum Working Voltage seen by Reinforced insulation is 600 Vpk Minimum DTI required is 0.4 mm Test Voltage = 3000 Vrms X 1.6 = 4800 Vrms Note (1): 3000 Vrms is from Table 5B, Part 1. ZPMV2 LIS Info: Note (2): x1.6 factor is specified in CEMENTED JOINT Tested per UL , Sec ; Working Voltage: 1550V; Insulation Grade: Reinforced; Minimum Distance Through Insulation: 0.40mm. 37
38 Test voltage of 3,000 V (1.6x = 4,800 V), the upper limit of end product working voltage can be extended to 1,550 V peak or d.c. 38
39 THANK YOU
40 Learn more about UL University - ITE: Designing for Compliance to UL nd Edition, CAN/CSA-C22.2 No ; 2007 and IEC nd edition; 2005 This newly designed two-day workshop will review product safety of information technology and communications equipment from the technical design perspective and in the context of accessing global markets with single equipment designs. Your experienced UL instructors will cover the based content of UL , and all notable differences between the first and more recently published second editions. Also available as online course. 40
41 Learn more about High Tech Section of UL.com White Paper: IEC : A New Safety Standard for High-Tech Products Technical Briefs: 20+ Miscellaneous Topics 41
42 Learn more about UL University - Audio/Video, Information Technology and Communications Technology Equipment Safety Requirements: Introduction to IEC This one-day workshop provides an introduction to the new safety standard for Audio/Video, Information Technology and Communications Technology Equipment Part 1 - Safety Requirements, IEC
43 Learn more about HBSE & Safety Science UL University - Applied Safety Science and Engineering Techniques (ASSET) The two-day course on Applied Safety Science and Engineering Techniques merges Safety Science and Hazard Based Safety Engineering principles within the overall framework of a safety management process. The objective of this ASSET Process is to achieve, maintain and continuously improve safety. This ASSET Process has been synthesized from other current, mainstream principles of risk assessment and risk management, including ISO/IEC Guide 51, IEC Guide 116, ISO 31000, ISO/IEC 31010, ISO 14121, ISO and IEC (60) You will learn the basic relationship between hazards, exposure and harm to persons, property and the environment and the means to safeguard against harm. As an example of these relationships, the mechanisms by which products can cause injury to the human body are explored in the workshop. You will also learn to use models and tools that can help you analyze those mechanisms and determine how best to prevent harm from occurring, in the framework of risk management, systems engineering and other relevant principles. 43
44 Key Terminology
45 Properties of Insulation CLEARANCE (Distance Through Air) Shortest distance between two conductive parts, or between a conductive part and the bounding surface (outer surface of enclosure) of the equipment, measured through air CREEPAGE DISTANCE (Distance Over Surface) Shortest path between two conductive parts, or between a conductive part and the bounding surface (outer surface of enclosure) of the equipment, measured along the surface of the insulation
46 Properties of Insulation (cont ) SOLID INSULATION (Distance Through Insulation, or Thickness) Material that provides electrical insulation between two opposite surfaces, not along an outer surface DTI Distance Through Air Distance Along Insulation Prepreg DTI Core Laminate Prepreg DTI (Distance Through Insulation) Core Laminate Prepreg
47 Types of Insulation FUNCTIONAL INSULATION Insulation needed only for the correct functioning of the equipment - Does not protect against electric shock, but may reduce the likelihood of ignition and fire BASIC INSULATION Insulation to provide basic protection against electric shock SUPPLEMENTARY INSULATION Independent insulation applied in addition to BASIC INSULATION in order to reduce the risk of electric shock in the event of a failure of the BASIC INSULATION
48 Types of Insulation (cont ) DOUBLE INSULATION (between Primary and Secondary) Insulation comprising both BASIC INSULATION and SUPPLEMENTARY INSULATION REINFORCED INSULATION (between Primary and Secondary) Single insulation system that provides a degree of protection against electric shock equivalent to DOUBLE INSULATION under the conditions specified in the standard
49 Pollution Degrees Pollution Degree 1 (PD1) No pollution or only dry, non-conductive pollution which has no influence Achieved by enveloping or hermetic sealing components and subassemblies so as to exclude dust and moisture Pollution Degree 2 (PD2) Only non-conductive pollution that might temporarily become conductive due to occasional condensation IEC & IEC generally assume a PD2 environment, unless requested otherwise by the manufacturer.
50 Pollution Degrees (cont ) Pollution Degree 3 (PD3) Conductive pollution, or dry non-conductive pollution which could become conductive due to expected condensation Local environment within the equipment
51 Circuits and Circuit Characteristics PRIMARY CIRCUIT circuit that is directly connected to the AC MAINS SUPPLY SECOND CIRCUIT circuit that has no direct connection to a PRIMARY CIRCUIT and derives its power from a transformer, converter or equivalent isolation device, or from a battery Accessible Conductive Parts Insulation
52 Circuits and Circuit Characteristics (cont ) WORKING VOLTAGE Highest voltage measured in peak or d.c., to which the insulation or the component under consideration is, or can be, subjected when the equipment is operating under conditions of normal use. Overvoltages that originate outside the equipment are not taken into account. HAZARDOUS VOLTAGE Voltage exceeding 42.4 V peak (30 V r.m.s.) or 60 V d.c., existing in a circuit that does not meet the requirements for either a LIMITED CURRENT CIRCUIT (LCC) or a TNV CIRCUIT.
53 Circuits and Circuit Characteristics (cont ) HAZARDOUS VOLTAGE (cont ) ELV (Extra Low Voltage), maintained only under normal operating conditions SELV (Safety Extra Low Voltage), maintained under both normal operating and single fault conditions IEC modified concept with introduction of ES1, ES2 and ES3; voltage, frequency and current dependent - ES = electrical energy source, defined by electrically-caused injury - ES1 = meets ES1 limits under normal and abnormal operating conditions, and does not exceed ES2 under single fault conditions - ES2 = meets ES2 limits under normal, abnormal & single fault conditions - ES3 = exceeds ES2
54 Overvoltage Category (per IEC ) Depends on the manner of connection of the equipment to the building power supply arrangements. Is the largest peak value of transient overvoltage likely to be experienced at the power input interface of equipment connected to a MAINS SUPPLY is known as the MAINS TRANSIENT VOLTAGE. Minimum CLEARANCES for insulation in PRIMARY CIRCUITS are based on the MAINS TRANSIENT VOLTAGE. Note: IEC & IEC generally assume an Overvoltage Category II, unless requested otherwise by the manufacturer.
55 Circuits and Circuit Characteristics AC MAINS SUPPLY AC power distribution system external to the equipment for supplying power to a.c. powered equipment. These power sources include public or private utilities and, unless otherwise specified in the standard equivalent sources such as motor-driven generators and uninterruptible power supplies. MAINS TRANSIENT VOLTAGE Highest peak voltage expected at the power input to the equipment, arising from external transients on the MAINS SUPPLY.
Ref No: Date: February 8, 1995 INDUSTRIAL CONTROL EQUIPMENT NO. 2
Ref No: 95-013 Date: February 8, 1995 INDUSTRIAL CONTROL EQUIPMENT NO. 2 To: Manufacturers of Industrial Control Equipment Subject: Publication of Technical Information Letter (T.I.L.) No D-21 on Interim
More informationTotal credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
More informationStationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems
Stationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems Laurie Florence Principal Engineer Batteries, Fuel Cells & Capacitors Laurie.b.florence@us.ul.com 1-847-664-3782
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2016-04-08 Page 1 of 24 Report Reference # E186249-A263-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2014-10-14 (Information
More informationBP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2012-03-23 Page 1 of 16 Report Reference # E186249-A202-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2011-12-19 (Information
More informationThermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-3 CB DE1-9640/A2 Date of issue...
More informationPrimary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
More informationDC/DC CONVERTER Safety Standards
DC/DC CONVERTER Safety Standards Safety Standards UL1950 & EN0950 1- General For the majority of DC/DC converter applications in the telecommunications and datacommunications equipment, the applicable
More informationE-15 Uninterruptible Power Systems (UPS)
Guideline No.E-15 (201705) E-15 Uninterruptible Power Systems (UPS) Issued date: May 9, 2017 China Classification Society Foreword This Guideline is a part of CCS Rules, which contains technical requirements,
More informationInvestigation into UK socket-outlets incorporating USB charging points
Investigation into UK socket-outlets incorporating USB charging points Electrical Safety First investigated a number of commercially available UK socket-outlets incorporating USB ports, as a repeat of
More informationAdvancements in the Integration of PV and Energy Storage Systems. APEC March Tim Zgonena
Advancements in the Integration of PV and Energy Storage Systems APEC March 2016 2015 UL LLC Tim Zgonena Principal Engineer Distributed Energy Resources Equipment UL LLC WE ARE A GLOBAL FORCE FOR GOOD
More informationCERTIFICATION & BUSINESS ENHANCEMENT (CBE)
CERTIFICATION & BUSINESS ENHANCEMENT (CBE) DICKENS MAMBU SGS ADVISORY BOARD MEMBER (SUSTAINABILITY) REGION HEAD OF CERTIFICATION PRESENTATION OUTLINE SGS Background SGS Presence in Sarawak (certification)
More informationFEDERAL RESERVE statistical release
FEDERAL RESERVE statistical release FOR IMMEDIATE RELEASE MARCH 16, 1992 E.U C1Z1, GEOGRAPHICAL r DISTRIBUTION n OF e ASSETS AND^LIABILITIES (IN MILLIONS OF DOLLARS) ASSETS COUNTRY OF CUSTOMER 12/31/90
More informationInfographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
More informationWorld Air Conditioner Demand by Region
World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning Industry Association 1 World Air Conditioner Demand by Region April 2015 The Japan Refrigeration and Air Conditioning
More informationEfficient Electrification Initiative Update
Efficient Electrification Initiative Update NSTF Discussion Forum SE4All in South Africa April 17, 2018 Barry MacColl https://www.epri.com/#/pages/sa/us_national_electrification_assessment Three Key Aspects
More informationARYZTA AG. Particulars. RSPO Annual Communications of Progress Particulars Form. About Your Organisation. 1.1 Name of your organization
Particulars About Your Organisation 1.1 Name of your organization 1.2 What is/are the primary activity(ies) or product(s) of your organization? Oil Palm Growers Palm Oil Processors and/or Traders Consumer
More informationUpdate on Fast SAR Techniques and IEC V3. Matthias MEIER Chairman of Advisory Board, ART-Fi 10 April 2014
Update on Fast SAR Techniques and IEC 62209 V3 Matthias MEIER Chairman of Advisory Board, ART-Fi 10 April 2014 ART-Fi Company Profile Mission: developing radiofrequency solutions for efficient design and
More informationChit Chats clients save up to 70% on U.S. and international postage.
ONTARIO RATE CARD 2018 Prices are valid from January 21, 2018 Chit Chats clients save up to 70% on U.S. and international postage. Ship your package to the U.S. as if you were in the U.S. Packages under
More informationF Statistics on total credit to the non-financial sector
F Statistics on total credit to the non-financial sector www.bis.org/statistics/totcredit.htm The BIS statistics on credit to the non-financial sector capture borrowing activity of the government sector
More informationGLOBAL SUMMARY REPORT Market for High Voltage Insulators & Bushings
GLOBAL SUMMARY REPORT Market for High Voltage Insulators & Bushings 2010-2015 - 2025 GOULDEN REPORTS October 2016 No 1 Priorsfield, Marlborough, Wiltshire, SN84AQ. United Kingdom Tel: +44 1672 513316 Fax:
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2010-04-01 Page 1 of 8 Report Reference # E229738-A1-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment
More informationGB/T / IEC :2007
Translated English of Chinese Standard: GB/T16935.1-2008 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 29.120 K 30 GB/T 16935.1-2008 / IEC
More informationE-15 Uninterruptible Power Systems (UPS)
Guideline No.E-15 (201510) E-15 Uninterruptible Power Systems (UPS) Issued date:20 October, 2015 China Classification Society Foreword This Guide is a part of CCS Rules, which contains technical requirements,
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 221868-CI3-2 CB DE1-56824 Date of issue...
More informationGlobal Valuation Summary - SAMPLE PAGES
- SAMPLE PAGES Regional Valuation Comparisons... 2... 4... 7... 9... 11 Developed Asia Pacific ex... 13 Developed Europe ex... 16 Advanced Emerging... 19 Appendix... 22 Disclaimer... 23 Global Market Valuations
More informationSelecting DC Sources for Telecommunications Equipment Test Systems
Selecting DC Sources for Telecommunications Equipment Test Systems Application Note Overview When selecting DC sources for test systems for telecommunications equipment one must take industry standards
More informationAIR POLLUTION AND ENERGY EFFICIENCY. Report of the Working Group on Air Pollution and Energy Efficiency. Part 2
E MARINE ENVIRONMENT PROTECTION COMMITTEE 67th session Agenda item 4 16 October 2014 Original: ENGLISH DISCLAIMER As at its date of issue, this document, in whole or in part, is subject to consideration
More informationCHAPTER 2: ELECTRICAL SAFETY
CHAPTER 2: ELECTRICAL SAFETY 2.1 Physiological Effect of Electricity 2.2 Macroshock and Microshock Macroshock Microshock 2.3 Approaches toward Protection against Shock 2.4 Medical Safety Test Electrical
More informationTEST REPORT IEC Part 1: General requirements for basic safety and essential performance
Test Report issued under the responsibility of: TEST REPORT IEC 60601-1 Part 1: General requirements for basic safety and essential performance Report Number.... : T223-0347/14 Date of issue... : 2014-12-05
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 207809-CI3-2 CB DE1-49619/A2/B1/M2 Date
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number....: T223-0035/16 Date of issue...: 2016-02-01
More informationGerman Hydrogen Association
German Hydrogen Association EVA, Vienna, 31. March 2004 Safety of Hydrogen: Standards and Regulations, Ulrich Schmidtchen German Hydrogen Association (DWV), Berlin Missing link? A lot can be said about
More informationCASE STUDY. LINK Engineering Company Inc. Resolving Customers Brake Noise Issues
CASE STUDY LINK Engineering Company Inc. Resolving Customers Brake Noise Issues United States of America Automotive PULSE Since its foundation, Link Engineering Company has focused on the design and manufacture
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationINITIATING AND FUNDING R&D. IGRC 2014 Copenhagen September Brad Douville, Vice-President, Westport
INITIATING AND FUNDING R&D IGRC 2014 Copenhagen September 17-19 Brad Douville, Vice-President, Westport 1 Driving a Shift to Natural Gas as a Transportation Fuel» Energy transitions are enormously difficult»
More informationRoHS CoC CERTIFICATE of CONFORMITY. RoHS CERTIFICATE OF CONFORMITY THE FULL SOLUTION FROM THE MARKET LEADER
RoHS CoC CERTIFICATE of CONFORMITY RoHS CERTIFICATE OF CONFORMITY THE FULL SOLUTION FROM THE MARKET LEADER WORLD-WIDE ACCEPTANCE A FULLY INTEGRATED SOLUTION SGS is the world s leading inspection, verification,
More informationApplicant s address. Identification: (Model No.) Serial No.: Lab Name Lab address
Test Report No.: xx001 Page 1 of xx Issue Date: DD/MM/YYYY Manufacturer: Applicant s Name Applicant s address Test item: Set Top Box Identification: (Model No.) Serial No.: Receipt No.: Date of receipt:
More informationKey elements of the AS3000 Wiring standards and some of the recent changes.
Key elements of the AS3000 Wiring standards and some of the recent changes. Dean of Engineering Steve Mackay Worked for 30 years in Industrial Automation 30 years experience in mining, oil and gas, electrical
More informationI. World trade in Overview
I. World trade in - Overview Table I.1 Growth in the volume of world merchandise exports and production, 2-5 (Annual percentage change) 2-5 23 24 World merchandise exports 4.5 5. 9.5 6. Agricultural products
More informationCoal. 36 Reserves and prices 38 Production and consumption. 67 th edition
Coal 36 Reserves and prices 38 Production and consumption 67 th edition Total proved reserves at end 217 Million tonnes Anthracite and bituminous Subbituminous and lignite US 228 3116 25916 24.2% 357 Canada
More informationEnsuring the Safety Of Medical Electronics
Chroma Systems Solutions, Inc. Ensuring the Safety Of Medical Electronics James Richards, Marketing Engineer Keywords: 19032 Safety Analyzer, Medical Products, Ground Bond/Continuity Testing, Hipot Testing,
More informationCAST RESIN DISTRIBUTION TRANSFORMERS 2016 EDITION
CAST RESIN DISTRIBUTION TRANSFORMERS 2016 EDITION TMC TRANSFORMERS - GLOBAL NETWORK UK & IRELAND SPAIN NORTH AMERICA & CANADA GERMANY SWITZERLAND BENELUX & AUSTRIA ITALY POLAND INDIA CENTRAL & SOUTH AMERICA
More informationMinutes of the IEEE PSES TSTC teleconference held Wednesday, July 27, 2016 at 11:00 AM EST, for one hour.
IEEE Product Safety Engineering Society Minutes of the IEEE PSES TSTC teleconference held Wednesday, July 27, 2016 at 11:00 AM EST, for one hour. 1. Attendance/Introductions Members present: Don Gies (Nokia
More informationPerformance of Batteries in Grid Connected Energy Storage Systems. June 2018
Performance of Batteries in Grid Connected Energy Storage Systems June 2018 PERFORMANCE OF BATTERIES IN GRID CONNECTED ENERGY STORAGE SYSTEMS Authors Laurie Florence, Principal Engineer, UL LLC Northbrook,
More information(annual average compound growth rate)
Table 3-1. 3KDVHVRI*URZWKE\0DMRU5HJLRQ (annual average compound growth rate) 1820-70 1870-1913 1913-50 1950-73 1973-92 1820-1992 GDP Western Europe 1.7 2.1 1.4 4.7 2.2 2.2 Western Offshoots 4.3 3.9 2.8
More informationTEST REPORT IEC Part 1: General requirements for basic safety and essential performance
jhćmtc Test Report issued under the responsibility of: TEST REPORT IEC 60601-1 Part 1: General requirements for basic safety and essential performance Report Number.... : T223-0128/16 Date of issue...
More informationTest Report. E4S-Box V1.0
Test Report No. 05 / 5040-1-1a E4S-Box V1.0 S/N: 8 The results refer only to the tested equipment. Without written permission of the test laboratory it is allowed to publish parts of this test report.
More informationStatistical Annex. The international banking market. Introduction to the BIS locational and consolidated international banking statistics...
Statistical Annex The international banking market Introduction to the BIS locational and consolidated international banking statistics... page A4 1 BIS reporting banks: Summary of international positions...
More information67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production
Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed
More informationCleanroom Standards and Updates
Cleanroom Standards and Updates Cleanroom Standards / Environmental Guides FED-STD 209E: Established Sept, 1992: Cancelled November 2001 ISO 14644-1: Established May 1999 (replaces Fed-STD 209E, BS 5295)
More informationPresented to the IAPMO Standards Review Committee on December 9, 2013
Summary of Substantive Changes between the 2010 edition including Updates No. 1 and No. 2 dated September 2010 and August 2011 and the 2013 edition of CSA C22.2 No. 14 Industrial control equipment Presented
More informationConrad Schulte GmbH & Co. KG
Particulars About Your Organisation 1.1 Name of your organization Conrad Schulte GmbH & Co. KG 1.2 What is/are the primary activity(ies) or product(s) of your organization? Oil Palm Growers Palm Oil Processors
More informationRISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017
RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q2 2017 Corporates 4 0.57% 0.81% 0.84% 0.81% 4 8.75% 17.51% 26.12% 22.73% 57 0.23% 0.45% 1.66% 1.64% 58 33.81% 42.41% 45.00% 29.97% Corporates - Of Which: Specialised
More informationRISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017
RISK DASHBOARD ANNEX CREDIT RISK PARAMETERS Q4 2017 Corporates 10 1.22% 4.02% 26.81% 1.95% 9 15.68% 32.84% 36.64% 31.60% 51 0.20% 1.00% 4.08% 2.02% 54 34.12% 43.96% 45.10% 29.73% Corporates - Of Which:
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard
More informationELECTRICAL ENGINEERING & COMPUTER SCIENCE NEWSLETTER Volume
ELECTRICAL ENGINEERING & COMPUTER SCIENCE NEWSLETTER Volume 4 2016 Electrical Conductor Spacing Standards for Printed Circuit Boards Authors: Sonal Kothari Phan, Ph.D.; Jeremiah Stepan, Ph.D., P.E.; Benjamin
More informationINSTALLATION GUIDE NI WSN-3291 Outdoor IP Enclosure For NI WSN-32xx Series Devices
INSTALLATION GUIDE NI WSN-3291 Outdoor IP Enclosure For NI WSN-32xx Series Devices This installation guide describes how to install and use the National Instruments WSN-3291 outdoor IP enclosure. The NI
More informationA Comparison of Boat Introduction and Direct Injection using the Thermo Scientific ipro 5000 Series Combustion Analyzer
Application Note: 42165 A Comparison of Boat Introduction and Direct Injection using the Thermo Scientific ipro 5000 Series Combustion Analyzer Kristian J. Hoffman, Angela Seipel, Application Specialists,
More informationStability, Linearity and Repeatability of Nitrogen Determination by Flash Combustion using Argon as Carrier Gas
Stability, Linearity and Repeatability of Nitrogen Determination by Flash Combustion using Argon as Carrier Gas Liliana Krotz, Walter Galotta, and Guido Giazzi Thermo Fisher Scientific, Milan, Italy Overview
More informationSafety Requirements for Board-Mounted DC/DC Converters
Technical Paper 018 November 2011 Safety Requirements for Board-Mounted DC/DC Converters For many years, the power industry has struggled to understand the safety and isolation voltage requirements that
More informationAUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
More informationTest Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy
Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized
More informationRef No: N Date: December 7, Fuseholder Assemblies No. 2. Call us today! See Attachment 1 for Effective Dates.
Ref No: N07-094 Date: December 7, 2007 Fuseholder Assemblies No. 2 See Attachment 1 for Effective Dates. Call us today! We can help you stay on top of changes that will affect your Certification! 1-866-797-4272
More informationTANZANIA BUREAU OF STANDARDS
EDC 5 (5235) P3 Mini-Grid Systems DRAFT TANZANIA STANDARD (Draft for comments only) Part 2: Application of Inverters TANZANIA BUREAU OF STANDARDS TBS 2017 First Edition 2017 T able of content 1 2 3 4 5
More informationHigh Voltage Technology & Testing
The Power of Trust. The Future of Energy. HIGH VOLTAGE TESTING Qualification testing, condition assessment, and forensic analysis Manufacturers and utility users of high-voltage electrical equipment face
More informationI. Global wine markets,
I. Global wine markets, 2007-09 Table 1: Summary of the world's wine markets, 2007-09 (annual average) Vine % of cropland Wine Wine Wine Wine Wine Per adult wine Pop- GDP GDP Area under vines produced
More informationGlobal Coal and Coke Flows, 2008
Global Coal and Coke Flows, 2008 Phil Fisher Pet Coke Consulting Argus Petroleum Coke Summit September 17-18, 2009 Houston, TX Global Coal and Coke Flows What we will see: 1 How much steam coal is produced/
More informationSFC-FID ASTM System. SFC-4000 Series SFC. Performance Innovation Reliability
SFC-FID ASTM System SFC-4000 Series SFC Performance Innovation Reliability The JASCO SFC-FID system has been developed as a simple and validated turn-key solution for the measurement of the two ASTM standard
More informationBarry Callebaut Food Manufacturers Europe
Particulars About Your Organisation 1.1 Name of your organization Barry Callebaut Food Manufacturers Europe 1.2 What is/are the primary activity(ies) or product(s) of your organization? Oil Palm Growers
More informationINFINEUM WORLDWIDE WINTER DIESEL FUEL QUALITY SURVEY
INFINEUM WORLDWIDE WINTER DIESEL FUEL QUALITY SURVEY 22 http://www.infineum.com/ Contents Forward CONTENTS Introduction... 3 The Trends... 4 Worldwide Diesel Fuel Survey Physical Inspection Data Mean values...
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationUView Mini Transilluminator
UView Mini Transilluminator Instruction Manual Catalog #166-0531 Hardware Instruction Manual The UView mini transilluminator is suitable for research use only. It must be used by specialized personnel
More informationSafety Standards (Last updated November 2009)
General Information Safety (Last updated November 2009) The safety of the component parts is an important consideration in equipment design. However, a part-by-part analysis of component quality and design
More informationPacking Data Installation Instructions
Packing Data PK Installation Instructions This document describes how to install a Dataliner DL10 display in a panel or enclosure and connect power. European Union Directive Compliance wiring and safety
More informationA multi-model approach: international electric vehicle adoption
A multi-model approach: international electric vehicle adoption Alan Jenn Postdoctoral Researcher Gil Tal Professional Researcher Lew Fulton STEPS Director Sustainable Transportation Energy Pathways Institute
More informationDesign Standards NEMA
Design Standards Although several organizations are involved in establishing standards for the design, construction, and application of motor control centers, the primary standards are established by UL,
More informationMonetary and Economic Department. Detailed tables on preliminary locational and consolidated banking statistics at end-june 2012
Monetary and Economic Department Detailed tables on preliminary locational and consolidated banking statistics at end-june 2012 October 2012 Queries concerning this release should be addressed to statistics@bis.org.
More informationMonetary and Economic Department. Detailed tables on provisional locational and consolidated banking statistics at end-september 2009
Monetary and Economic Department Detailed tables on provisional locational and consolidated banking statistics at end-september 2009 January 2010 Queries concerning this release should be addressed to
More informationIECEE. Taking Conformity Assessment Further
Global Motor Energy Efficiency GMEE Dan Delaney Regal Beloit GMEE Convenor - IECEE PSC WG5/6 Chairman NEMA 1MG Section Committee Motor Summit Zurich, 11 October 2016 The Association of Electrical and Medical
More informationLifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
More informationSTEVAL-ISV012V1. Up to 5 W solar battery charger for single-cell Li-ion and Li-Pol batteries based on the SPV1040 and L6924D.
Up to 5 W solar battery charger for single-cell Li-ion and Li-Pol batteries based on the SPV1040 and L6924D Data brief Features SPV1040: solar boost converter with embedded maximum power point tracking
More informationAT120A-E; AT140A-E; AT150A,B,D-F; AT160B; AT175A-D,F Transformers
AT0A-E; AT0A-E; AT50A,B,D-F; AT60B; AT75A-D,F Transformers FEATURES PRODUCT DATA AT0 is rated at 0 VA. AT0 is rated at 0 VA. AT50 is rated at 50 VA. AT60 is rated at 60 VA. AT75 is rated at 75 VA. All
More informationGlobal Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationRecipCOM by HOERBIGER More protection and efficiency for reciprocating compressors
RecipCOM by HOERBIGER More protection and efficiency for reciprocating compressors Do you like surprises? Or would you rather opt for condition monitoring? If detected too late, compressor faults may not
More informationFG Series, 230V ac Toroidal Single Primary Transformers
A high quality range of open style toroidal transformers with flying leads. Featuring a single primary winding rated at 230V 50/60Hz, and dual secondary windings. Secondary windings can be connected in
More informationEvaluating Battery Run-Down with the N6781A 2-Quadrant Source/Measure Unit and the 14585A Control and Analysis Software.
Evaluating Battery Run-Down with the N6781A 2-Quadrant Source/Measure Unit and the 14585A Control and Analysis Software Application Note Analyzing and optimizing battery run time requires running tests
More informationTEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 31282706.003 Date of issue... : 22 nd March,
More information020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB)
020: 2013 CEB SPECIFICATION MINIATURE CIRCUIT BREAKER (MCB) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 0953 Fax: +94 11 232 3935 CONTENTS Page 1.0 Scope 3 2.0 System Parameters 3 3.0 Service
More informationGuideline No.: E-07(201610) E-07 TRANSFORMERS. Issued date: October 28,2016. China Classification Society
Guideline No.: E-07(201610) E-07 TRANSFORMERS Issued date: October 28,2016 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection and
More informationPage 2 of 6. Summary of testing The clause 17 and clause 29 are considered and check on the appliance.
12012453 003 age 2 of 6 Summary of testing The clause 17 and clause 29 are considered and check on the appliance. Test items particulars Serial umber... : rototype samples Additional information... : (.A.)...
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY MINNEAPOLIS LLC (A subsidiary of Element Materials Technology Minneapolis Inc.) 9725 Girard Avenue South Minneapolis, MN 55431
More information2 x 25 kv ac / 1 x 25 kv ac Grounding and Bonding
2 x 25 kv ac / 1 x 25 kv ac Grounding and Bonding By George Ardavanis, PhD Keywords: overhead catenary system (OCS), electric multiple unit (EMU), grounding and bonding (G&B), overhead contact line (OCL),
More informationMODERNISATION SOLUTIONS. MRM W Line. TIME FOR A FACE-LIFT!
MODERNISATION SOLUTIONS TIME FOR A FACE-LIFT! ADVANCED FEATURES WITTUR SOLUTION FOR MODERNISATION The, Wittur flexible machine roomless electric lift, offers an ideal solution for new lifts in existing
More informationGLOBAL SUSTAINABILITY REPORT 2016
GLOBAL SUSTAINABILITY REPORT 2016 KEY METRICS FINANCIAL SALES WORLDWIDE Dollars in Millions 2013 2014 2015 2016 DIVIDENDS PAID Dollars in Billions 2013 2014 2015 2016 TOTAL 19,657 20,247 20,405 20,853
More informationOverview. Applications. Benefits. Part Number System. Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC
Screw Terminal Supercapacitors S301 Series, Screw Termination, 2.7 V, 65ºC Overview KEMET S301 Series Supercapacitors utilize a proprietary electrode design to deliver a very high power density. This product
More information