SUBMITTAL DATA SHEET FEATURES. SPLIT-SYSTEM EVAPORATOR BLOWERS 7.5, 10, 15, 20 & 25 TONS MODELS: J07 thru 25NC, 2-PIPE J10 thru 20ND, 4-PIPE

Transcription

1 SUBMITTAL DATA SHEET SPLIT-SYSTEM EVAPORATOR BLOWERS 7.5, 10, 15, 20 & 25 TONS MODELS: J07 thru 25NC, 2-PIPE J10 thru 20ND, 4-PIPE JOB NAME: LOCATION: PURCHASER: ORDER NO: ENGINEER: SUBMITTED TO: FOR: REF: APPROVAL: CONSTRUCTION: SUBMITTED BY: DATE: UNIT DESIGNATION: SCHEDULE NO. MODEL NO. PRODUCT DATA Cooling Performance Total Capacity MBH Sensible Capacity MBH Evaporator Pressure at Saturation PSIG Evaporator Temperature at Saturation F Total Supply Air CFM Temp. of air Entering Evaporator Coil / F DB/WB Heating Performance Refer to field-installed accessories on reverse side. Supply Air Blower Performance Total Supply Air CFM Total Resistance External To Unit IWG Blower Speed RPM Blower Output Requirement.... BHP Motor Rating HP Power Input Requirement KW Electrical Data Power Supply / / Total Unit Ampacity AMPS Minimum Wire Size AWG (Copper Conductors) Maximum Fuse Size Dual Element AMPS Unit Weight Total Operating Weight LBS (Including field-installed accessories) FEATURES R-410A REFRIGERANT POWDER PAINT FOR DURABILITY INHERENTLY PROTECTED FAN MOTORS TON SINGLE AND DUAL REFRIGERATION CIRCUITS (SINGLE ON NC AND DUAL ON ND MODELS) PROVISIONS FOR HOT GAS BYPASS CSA APPROVAL 2 AND 4 FILTER RACK (4 FILTERS FIELD SUPPLIED) TON ELECTRIC HEAT (FIELD INSTALLED) TON HOT WATER HEATING COILS (FIELD INSTALLED) STEAM HEATING COILS (FIELD INSTALLED) FACTORY SELECTABLE MOTOR AND DRIVE OPTIONS TON ADJUSTABLE TXV S CAN BE APPLIED VERTICALLY OR HORIZONTALLY SINGLE POINT POWER ONE YEAR LIMITED PARTS WARRANTY ON COMPLETE UNIT 5 YEAR LIMITED WARRANTY ON ELECTRIC HEATING ELEMENTS TON DESIGNED TO OPERATE WITH COOLING ONLY UNITS OR HEAT PUMPS TON J20NC/ND INDOOR UNIT Johnson Controls Unitary Products JSD-E-0211

2 Corner Weights & Center of Gravity J07 Thru 20 NC/ND Units Model J07NC J10NC J10ND J15NC J15ND J20NC J20ND J07NC J10NC J10ND J15NC J15ND J20NC J20ND Center of Gravity Weight (lbs.) Drive Options (in.) 4 Point Load Location (lbs.) 6 Point Load Location (lbs.) Shipping Operating X Y A B C D A B C D E F Vertical Airflow Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Horizontal Airflow Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv Std. Mtr. and Drv High Static Mtr. and Drv LEFT LEFT A B A B C A B A B C FRONT WIDTH CG REAR FRONT WIDTH CG REAR DIM Y DIM Y F D E D C F D E D C DIM X LENGTH RIGHT DIM X LENGTH RIGHT VERTICAL POSITION HORIZONTAL POSITION 2 Johnson Controls Unitary Products

3 Corner Weights & Center of Gravity J25NC Units Model J25NC J25NC Drive HP Evaporator Blower Drive Section Section Section Weight (lbs.) Center of 4 Point Load Location (lbs.) 6 Point Load Location (lbs.) Gravity Cabinet Cabinet Cabinet Shipp Opera CG X CG Y A B C D A B C D E F Wt (lb) Wt (lb) Wt (lb) ing ting Vertical Airflow Horizontal Airflow D (E) (D) C D (E) (D) C Y CG X CG Y (F) (C) (F) (C) X MOTOR MOTOR A (A) (B) B A (A) (B) B Vertical Horizontal Johnson Controls Unitary Products 3

4 UNIT DIMENSIONS J07/10NC & J10ND TOP VIEW Ø 1.72 KNOCKOUT ELECTRIC HEAT Ø KNOCKOUT FOR ELECTRIC HEAT TOP VIEW - BLOWER OUTLET J07NC INDOOR TOP VIEW - BLOWER OUTLET J10NC/ND INDOOR FRONT AND SIDE VIEW Ø KNOCKOUT POWER ACCESS Ø KNOCKOUT POWER ACCESS FIELD PIPING S SYSTEM 2 SYSTEM DRAIN 3/4 ABS PIPE FRONT VIEW - RETURN AIR J07/10NC & J10ND INDOOR RIGHT SIDE VIEW - DRAIN PIPING/CONTROLS *SEE UNITS PHYSICAL DATA TABLE FOR PIPING AND ELECTRICAL SIZE S 4 Johnson Controls Unitary Products

5 J07/10NC & J10ND BOTTOM VIEW AIR IN HORIZONTAL CONFIGURATION Johnson Controls Unitary Products 5

6 J15NC/ND TOP VIEW Ø KNOCKOUT FOR ELECTRIC HEAT TOP VIEW - BLOWER OUTLET J15NC/ND INDOOR FRONT AND SIDE VIEW /4 CONDUIT KNOCKOUT Ø POWER ACCESS 1/2 CONDUIT KNOCKOUT Ø CONTROLS ACCESS FIELD PIPING S SYSTEM 2 SYSTEM DRAIN 3/4 ABS PIPE FRONT VIEW - RETURN AIR J15NC/ND INDOOR RIGHT SIDE VIEW - DRAIN PIPING/CONTROLS *SEE UNITS PHYSICAL DATA TABLE FOR PIPING AND ELECTRICAL SIZE S 6 Johnson Controls Unitary Products

7 J15NC/ND BOTTOM VIEW Ø KNOCKOUT FOR ELECTRIC HEAT TOP VIEW - BLOWER OUTLET HORIZONTAL CONFIGURATION [ 7 Johnson Controls Unitary Products

8 1-1/4 CONDUIT KNOCKOUT (Ø 1.718) ELECTRIC HEAT CONTROL WIRE J20NC/ND TOP VIEW 1-1/4 CONDUIT KNOCKOUT (Ø 1.718) ELECTRIC HEAT POWER BLOWER OPENING /4 CONDUIT KNOCKOUT (Ø 1.718) ELECTRIC HEAT POWER BLOWER OPENING BLOWER OPENING /4 CONDUIT KNOCKOUT (Ø 1.718) ELECTRIC HEAT CONTROL WIRE TOP VIEW BLOWER OUTLET J20NC/ND INDOOR FRONT AND SIDE VIEW /4 CONDUIT KNOCKOUT (Ø 1.718) POWER ACCESS 1/2 CONDUIT KNOCKOUT (Ø 0.875) CONTROLS ACCESS SYSTEM FIELD PIPING S SYSTEM DRAIN 3/4 ABS PIPE 7.12 FRONT VIEW - RETURN AIR J20NC/ND INDOOR RIGHT SIDE VIEW - DRAIN PIPING/CONTROLS *SEE UNITS PHYSICAL DATA TABLE FOR PIPING AND ELECTRICAL SIZE S 8 Johnson Controls Unitary Products

9 J20NC/ND BOTTOM VIEW AIR IN AIR IN HORIZONTAL CONFIGURATION Johnson Controls Unitary Products

10 J25NC TOP VIEW X Ø.88 K0 CONTROLS Ø 0.88 K0 ELECTRIC HEAT FRONT AND SIDE VIEW Ø 1.38 KO Ø 0.88 LIQUID Ø 2.13 SUCTION 25.0 Ø 0.88 DRAIN *SEE UNITS PHYSICAL DATA TABLE FOR PIPING AND ELECTRICAL SIZE S 10 Johnson Controls Unitary Products

11 J25NC HORIZONTAL CONFIGURATION Johnson Controls Unitary Products

12 PHYSICAL DATA MODEL J07NC J10NC J10ND J15NC J15ND J20NC J20ND J25NC DIMENSIONS (inches) Length Width Height SYSTEM DATA No. Refrigeration Circuits Suction Line OD (in.) 1 1/8 1 3/8 1 1/8 1 5/8 1 3/8 1 5/8 1 3/8 2 1/8 Liquid Line OD (in.) 5/8 7/8 5/8 7/8 5/8 7/8 7/8 7/8 Power Wiring Knockout 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 7/8 Control Wiring Knockout 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 Electric Heat Wiring Knockout 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 7/8 Drain Line Fitting PVC Stub 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/8 1 BLOWER OUTLET Number Width Length RETURN AIR INLET Width Length /8 in Steel Pipe Minimum Clearances Top with Supply Air Opening 1 24 Front with Return Air Opening 24 Right Side with access for Piping, Power & Control Wiring Connections 2 24 Left Side 24 Rear 3 N/A Bottom 4 N/A 1. This dimension will vary if an electric heater, a supply air plenum or a base is used. 2. This dimension is required for normal installation and service. 3. Although no clearance is required for service and operation, some clearance may be required for routing the power and control wiring. 4. Allow enough clearance to trap the condensate drain line. Note: If the coil has to be removed, the blower section can be unbolted and set aside and the coil can be lifted out the top of the evaporator section. FIELD-INSTALLED ACCESSORIES STEAM COIL MODEL Steam Pressure PSIG Capacity MBH Steam Rate LBS/HR Entering Air Temperature F ELECTRIC HEAT KW HOT WATER COIL Capacity MBH Entering Water Temperature F Water Flow Rate GPM Entering Air Temperature F Water Pressure Drop PSI BASE ACCESSORY BOTTOM RETURN ACCESSORY SUSPENSION MOUNTING ACCESSORIES (25 TON) SUPPLY AIR PLENUM RETURN AIR GRILLE * Units with electric heat have a single source power supply. Refer to PRODUCT DATA on front side for electrical data. FACTORY-INSTALLED OPTIONS TECHNICOATED COIL NOTES: Subject to change without notice. Printed in U.S.A. Copyright 2011 by Johnson Controls, Inc. All rights reserved JSD-E-0211 Supersedes: JSD-D-0710 Johnson Controls Unitary Products 5005 York Drive Norman, OK 73069