Tack Distributor Model No. L150,L250, L500 Manual No
|
|
- Rosalind Lindsey
- 6 years ago
- Views:
Transcription
1 OPERATIONS SERVICES AND PARTS MANUAL Tack Distributor Model No. L50,L50, L500 Manual No. 50
2 Table of Contents Page User's Reference Guide Warranty Certificate General Information Warning Information Safety and Informative Decals Tack Distributor L50 Trailer Specifications Tack Distributor L50 Skid Mount Specifications Tack Distributor L50 Trailer Specifications Tack Distributor L50 Skid Mount Specifications Tack Distributor L500 Trailer Specifications Tack Distributor L500 Skid Mount Specifications Major Components Illustration Major Components Explanation Major Components Explanation Pre-start Information Operation of Tack Distributor Operation of Spray Wand and Spray Bar Parts Information Major Wear Parts TACK DISTRIBUTOR
3 Parts [List of Illustrations] Page L50 Trailer Parts L50 Skid Parts L50 Trailer Parts L50 Skid Parts L500 Trailer Parts L500 Skid Parts L50 Hoses L50/L500 Hoses Propane Tank Assembly Engine and Pump Assembly Lower Liquid Asphalt Valve Assembly Selector Valve Assembly Spray Select Valve Assembly, Trailer Spray Select Valve Assembly, Skid Spray Bar Assembly L50 Idler Axle Assembly L50 Axle & Brake Assembly L500 Idler Axle Assembly L50/L500 Axle & Brake Assembly TACK DISTRIBUTOR
4
5 USER'S REFERENCE GUIDE DELIVERY DATE UNIT SERIAL NUMBER ENGINE TYPE ENGINE NUMBER DEALER'S NAME AND ADDRESS PHONE NUMBER EQUIPMENT HOURS SERVICE MANAGER 688 North Highway 6 Denver, North Carolina (70) TACK DISTRIBUTOR 3
6 One Year or 000 Hour LIMITED WARRANTY WARRANTY. If a defect in material or workmanship is found and the authorized dealer is notified during the warranty period, LeeBoy will repair or replace any part or component of the unit or part that fails to conform to the warranty during the warranty period.. The warranty date will begin upon the completion of the warranty form by the initial customer and will expire after twelve () months have passed. The Warranty Card should be filled out within (0) days of delivery of the unit. 3. Engines are warranted by their manufacturers and may have warranty coverage that differs from that of LeeBoy.. Replacement parts furnished by LeeBoy are covered for the remainder of the warranty period applicable to the unit or component in which such parts are installed. 5. LeeBoy has the right to repair any component or part before replacing it with a new part. 6. All new replacement parts purchased by a LeeBoy dealer will carry a six (6) month warranty. Remanufactured parts purchased by a LeeBoy dealer will carry a ninety (90) day warranty. ITEMS NOT COVERED LeeBoy is not responsible for the following:. Charges for travel time, mileage, or overtime.. Charges related to transporting the product to and from the place at which warranty work is performed. 3. Airfreight charges related to transporting repair parts to the place at which warranty work is performed.. All used units or used parts of any kind. 5. Repairs due to normal wear and tear, or brought about by abuse or lack of maintenance of the equipment, except for premature failures, conveyor chains, polytrack pads, and track rails. 6. Attachments not manufactured or installed by LeeBoy. 7. Liability for incidental or consequential damages of any type including, but not limited to lost profits or expenses of acquiring replacement equipment. 8. Miscellaneous charges. LIMITATIONS LeeBoy has no obligation under this warranty for:. Any defects caused by misuse, misapplication, negligence, accident or failure to maintain or use in accordance with the most current operating instructions.. Unauthorized alterations. 3. Defects or failures caused by any replacement parts or attachments not manufactured by or approved by LeeBoy.. Failure to conduct normal maintenance and operating service, including without limitation, providing lubricants, coolant, fuel, tune-ups, inspections or adjustments. 5. Unreasonable delay, as established by LeeBoy, in making the applicable units or parts available upon notification of a service notice ordered by LeeBoy. 6. The warranty responsibility on all engines rests with the respective manufacturer. 7. LeeBoy may have support agreements with some engine manufacturers for warranty and parts support. OTHER WARRANTIES THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESSED STATUTORY AND IMPLIED WARRANTIES APPLICABLE TO UNITS ENGINES, OR PARTS WITHOUT LIMITATION, ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR USE OR PURPOSE. IN NO EVENT, WHETHER AS A RESULT OF BREACH OF CONTRACT OR WARRANTY, OR ALLEGED NEGLIGENCE OR LIABILITY WITHOUT FAULT, SHALL LEEBOY BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT OR REVENUE, COST OF CAPITAL, COST OF SUBSTITUTED EQUIPMENT, FACILITIES OR SERVICES DOWNTIME COSTS, LABOR COSTS OR CLAIMS OF CUSTOMERS, PURCHASERS OR LESSEES FOR SUCH DAMAGES. TACK DISTRIBUTOR
7 General Information Congratulations on your purchase of a LeeBoy Tack Distributor. This manual is designed to help with the operation and service of your new unit. This unit was carefully designed and manufactured to provide years of dependable service. To keep your tack distributor operating efficiently and safely, carefully read the instructions in this manual. If any questions arise concerning this publication or other manuals in regards to the operation and maintenance of this unit, contact our local LeeBoy dealer for the latest available information. Contents of this manual are based on information in effect at the time of publications and are subject to change without notice. 688 North Highway 6 Denver, North Carolina (70) TACK DISTRIBUTOR 5
8 WARNINGS ALL WARNING DECALS MUST BE FOLLOWED. IF YOU DO NOT FOLLOW THE INSTRUCTIONS, ANY MISTAKE YOU MAKE COULD RESULT IN SERIOUS INJURY AND/OR PHYSICAL HARM TO YOU OR OTHERS. DAMAGE TO THE MACHINE IS ALSO POSSIBLE. NEVER DO ANY MAINTENANCE WHILE BURNERS ARE ON OR ENGINE IS RUNNING. ALWAYS SCOTCH/CHOCK TACK DISTRIBUTOR WHEN LEFT UNATTENDED. NEVER LIGHT TACK BURNERS WITH ANYTHING BUT LIGHTER PROVIDED. NEVER USE SEAL COATING UNLESS FIRST CONTACTING DISTRIBUTOR FOR CORRECT SPECIFICATIONS. NEVER USE FIBER BASE SEAL COAT; THIS COULD DAMAGE THE PUMP AND CLOG THE SPRAY WAND. ALWAYS BE EXTREMELY CAREFUL WHEN IGNITING BURNERS WITH THE LIGHTER PROVIDED. MAKE SURE THE LIGHTER IS KEPT AWAY FROM THE FUEL TANK AND OTHER FLAMMABLE MATERIAL. ALWAYS MAINTAIN DECALS ON MACHINE AND REPLACE IF MISSING OR BADLY WORN. ALWAYS MAINTAIN TACK LEVEL AT LEAST 3 INCHES ABOVE BURNER FLUE. NEVER EXCEED TOWING SPEED SET BY CITY, STATE, AND FEDERAL LAWS. FURTHER- MORE, USE LOWER SPEED WHEN TOWING OVER SLIPPERY OR UNEVEN SURFACES. NEVER ALLOW EXCESSIVE TACK TO BUILD UP ON TACK TANK. THE TACK MAY BE ACCIDENTALLY IGNITED. ALWAYS KEEP ALL UNAUTHORIZED PERSONNEL AWAY FROM WORKING TACK DISTRIBUTOR. ANY AUTHORIZED PERSONS SHOULD WEAR PROTECTIVE CLOTHING AND GLASSES. ALWAYS USE A VEHICLE OF ADEQUATE SIZE WHEN TOWING A TACK DISTRIBUTOR. QUICK STOPS MAY NOT BE POSSIBLE WHEN USING AN UNDERSIZED TOWING VEHICLE. NEVER FILL FUEL TANK OR TACK WHILE ENGINE IS RUNNING OR PROPANE BURNERS ARE LIGHTED. NEVER LEAVE TACK DISTRIBUTOR UNATTENDED WHILE HEATING. NEVER REMOVE SPRAY WAND NOZZLE WHILE ENGINE IS RUNNING. 6 TACK DISTRIBUTOR
9 FLAMMABLE 3 TACK PUMP FLUSH DO NOT REMOVE NOZZLE FROM SPRAY WAND WHILE ENGINE IS RUNNING 5 WARNING! KEEP TAR LEVEL 3 ABOVE BURNER IN USE IMPORTANT! USE ONLY EMULSIFIED ASPHALT THAT WILL SPRAY BELOW 90 O F TURN FLUSH VALVE ON BEFORE STARTING ENGINE 9 0 LIQUID ASPHALT OFF ON 0 3 DO NOT OPERATE OR TOW THIS MACHINE WITHOUT FIRST FULLY UNDERSTANDING THE CONTENTS OF THE OPERATIONS MANUAL L500 6 TACK DISTRIBUTOR 7
10 LeeBoy Model L50 Track Distributor (Trailer Specifications) 65 /" /" 7/8" /" 7" 69 3/" Engine: 5 HP Honda gas engine Fill Spout: 0" x 0" Asphalt Pump: Specially designed.308 CI Pump Clean Out: " Heat System: Two () 5,000 BTU Propane burners, one () starter burner and a 30 lb. fuel tank Temperature Gauge: degrees Fahrenheit Tank Dimensions: Length: /" Width: 3 /" Height: 30 /" Flush Tank: Seven (7) gallon Access Valve: Dimensions: Length: 3 /" Width: 69 3/" Height: 86 3/" Shipping Weight:,60 lbs. Loaded Weight:,50 lbs. Optional Equipment: Eight (8) foot spray bar that folds to a lockable position. Hose & Reel: Wand: /" x 0' heavy duty hose with a heavy duty re-coil reel Six (6) foot wand with on/off valve and removable spray tip Separate cut-off valves to control each spray nozzle. 5 HP Briggs & Stratton 8 TACK DISTRIBUTOR
11 LeeBoy Model L50 Track Distributor (Skid Mount Specifications) 6" 8" Engine: 5 HP Honda gas engine Fill Spout: 0" x 0" Asphalt Pump: Specially designed.308 CI Pump Clean Out: " Heat System: Two () 5,000 BTU Propane burners, one () starter burner and a 30 lb. fuel tank Temperature Gauge: degrees Fahrenheit Tank Dimensions: Length: /" Width: 3 /" Height: 30 /" Flush Tank: Seven (7) gallon Access Valve: Dimensions: Length: 6" Width: 8" Height: 76 3/8" Shipping Weight: 900 lbs. Loaded Weight:,60 lbs. Optional Equipment: Eight (8) foot spray bar that folds to a lockable position. Hose & Reel: Wand: /" x 0' heavy duty hose with a heavy duty re-coil reel Six (6) foot wand with on/off valve and removable spray tip Separate cut-off valves to control each spray nozzle. 5 HP Briggs & Stratton TACK DISTRIBUTOR 9
12 LeeBoy Model L50 Track Distributor (Trailer Specifications) 69 3/8 7/8" 7/8" 8 /" 7" 7" Engine: 5 HP Honda gas engine Fill Spout: 0" x 0" Asphalt Pump: Specially designed.308 CI Pump Clean Out: " Heat System: Two () 5,000 BTU Propane burners, one () starter burner and a 30 lb. fuel tank Temperature Gauge: degrees Fahrenheit Tank Dimensions: Length: 8 /" Width: /" Height: 3 /" Flush Tank: Seven (7) gallon Access Valve: Dimensions: Length: 0 /" Width: 7" Height: 9 /" Shipping Weight:,00 lbs. Loaded Weight: 3,500 lbs. Optional Equipment: Eight (8) foot spray bar that folds to a lockable position. Hose & Reel: Wand: /" x 0' heavy duty hose with a heavy duty re-coil reel Six (6) foot wand with on/off valve and removable spray tip Separate cut-off valves to control each spray nozzle. 5 HP Briggs & Stratton 0 TACK DISTRIBUTOR
13 LeeBoy Model L50 Track Distributor (Skid Mount Specifications) 78 3/6" 80 5/8" 7 3/6" 6" 8" Engine: 5 HP Honda gas engine Fill Spout: 0" x 0" Asphalt Pump: Specially designed.308 CI Pump Clean Out: " Heat System: Two () 5,000 BTU Propane burners, one () starter burner and a 30 lb. fuel tank Temperature Gauge: degrees Fahrenheit Tank Dimensions: Length: 8 /" Width: /" Height: 3 /" Flush Tank: Seven (7) gallon Access Valve: Dimensions: Length: 6" Width: 8" Height: 80 5/8" Shipping Weight:,60 lbs. Loaded Weight: 3,50 lbs. Optional Equipment: Eight (8) foot spray bar that folds to a lockable position. Hose & Reel: Wand: /" x 0' heavy duty hose with a heavy duty re-coil reel Six (6) foot wand with on/off valve and removable spray tip Separate cut-off valves to control each spray nozzle. 5 HP Briggs & Stratton TACK DISTRIBUTOR
14 LeeBoy Model L500 Track Distributor (Trailer Specifications) 56 3/8 /8 83 7/8 70 / 73 /8 Engine: 5 HP Honda gas engine Fill Spout: 0" x 0" Asphalt Pump: Specially designed.308 CI Pump Clean Out: " Heat System: Two () 5,000 BTU Propane burners, one () starter burner and a 30 lb. fuel tank Temperature Gauge: degrees Fahrenheit Tank Dimensions: Length: 83 7/8" Width: 8 /" Height: 3" Flush Tank: Seven (7) gallon Access Valve: Dimensions: Length: 5" Width: 73 /8" Height: 7 5/8" Shipping Weight:,700 lbs. Loaded Weight: 6,700 lbs. Optional Equipment: Eight (8) foot spray bar that folds to a lockable position. Hose & Reel: Wand: /" x 0' heavy duty hose with a heavy duty re-coil reel Six (6) foot wand with on/off valve and removable spray tip Separate cut-off valves to control each spray nozzle. 5 HP Briggs & Stratton TACK DISTRIBUTOR
15 LeeBoy Model L50 Track Distributor (Skid Mount Specifications) 3/8" 6 5/8" 5 7/8" 03" 5 /8" 8 /" Engine: 5 HP Honda gas engine Fill Spout: 0" x 0" Asphalt Pump: Specially designed.308 CI Pump Clean Out: " Heat System: Two () 5,000 BTU Propane burners, one () starter burner and a 30 lb. fuel tank Temperature Gauge: degrees Fahrenheit Tank Dimensions: Length: 83 7/8" Width: 8 /" Height: 3" Flush Tank: Seven (7) gallon Access Valve: Dimensions: Length: 03" Width: 8 /" Height: 6 5/8" Shipping Weight:,700 lbs. Loaded Weight: 6,700 lbs. Optional Equipment: Eight (8) foot spray bar that folds to a lockable position. Hose & Reel: Wand: /" x 0' heavy duty hose with a heavy duty re-coil reel Six (6) foot wand with on/off valve and removable spray tip Separate cut-off valves to control each spray nozzle. 5 HP Briggs & Stratton TACK DISTRIBUTOR 3
16 Major Components 7. PROPANE TANK 6. FILL NECK 5. SPRAY WAND SELECT 6. SPRAY BAR SELECT 3. ENGINE. JACK STAND 8. BURNERS. IGNITER 9. SPRAY WAND. DISTRIBUTOR VALVE. FLUSH TANK. CIRCULATING TANK VALVE 3. THERMOMETER 0. LIQUID ASPHALT VALVE 5. RELIEF VALVE. FLUSH VALVE TACK DISTRIBUTOR
17 MAJOR COMPONENTS. Flush Tank Flush tank contains the fluids used to flush and clean out the pump and system.. Igniter Igniter is used to light the burners for heating. Caution should be used with this because of the gas engine and the fuel in the flush tank. Also, make sure there are no gas flames in the exhaust stacks.! WARNING! WHEN IGNITING BURNERS WITH LIGHTER BE EXTREMELY CAREFUL THAT THE LIGHTER IS KEPT AWAY FROM THE FUEL TANK AND OTHER FLAMMABLE MATERIALS. 3. Engine Engines available on the tack distributor are either Honda or Briggs & Stratton. These are gas engines and clean gas should be used at all times.. Jack Stand Jack stand is used to hook and unhook the unit from the truck. Caution should be used when unhooking unit to make sure wheels are scotched so unit will not roll. 5. Relief Valve Relief valve adjusts pressure of the pump. It is recommended to have the least amount of pressure on the valve to prolong the pump life. Set relief valve pressure on initial start-up. 6. Fill Neck Fill neck is where you fill tack tank. Make sure splash plate is in place. 7. Propane Tank Propane is used to heat tack. The tank pressure should range from eight (8) to ten (0) lbs. of pressure. 8. Burners Right and left burners heat the tack. Before lighting, make sure valves to burners are off. They should be lit with igniter only. Make sure tack level is three (3) inches above burner and unit is sitting level. 9. Spray Wand Spray wand is used to spray tack. It has an on/off ball valve that lets you spray small areas and pavement edges. Care and caution must be used to keep the nozzle clean and the line flushed after each use. WARNING: You should never attempt to clean nozzle out or remove nozzle while machine is running. The line can become pressurized and spray tack on an individual. Hot tack causes harm and/or injury. 0. Liquid Asphalt Valve Liquid asphalt valve allows liquid asphalt to be pumped out of the tank and into the spray wand or spray bar. It must be turned off to flush out the system. The only function of this valve is to retrieve tack from the tank and should be off at all other times.. Distributor Valve Distributor Valve is used to retrieve tack from lines and spraybar.. Circulating Tank Valve Tank valve is used to circulate the tack back into the tank. It must be closed off to force the tack to the spray bars and wand. It must be off while flushing the system. 3. Thermometer Thermometer is used to measure temperature inside the tack tank. Temperature should not exceed 90 deg. (F). TACK DISTRIBUTOR 5
18 (cont'd) MAJOR COMPONENTS.Flush Valve Flush valve is used to allow the flush material to flow out of the flush tank and into pump system. 5.Spray Wand Select Valve Spraywand select valve allows the tack material to flow to spraywand. 6. Spray Bar Select Valve Spraybar select valve allows the flow of material to the spraybar. 6 TACK DISTRIBUTOR
19 PRE START-UP INSPECTION GENERAL OPERATION To assure that the tack distributor provides the best possible service before use, a prestart up inspection should be performed.. Engine (A) Check oil level. (B) Check fuel tank level. (C) Check for any cracked, broken or worn parts.. Tack Tank and Attaching Components (A) Check tack level, fill if needed. (B) Remove contamination on surface. (C) Check spray wand valve to make sure it works freely. (D) Check propane level. (E) Check flow valves to make sure they are working freely. (F) Check flush tank level. (G) Check for cracked, broken or worn parts. (H) Check wheel lugs. (I) Check tire pressure. START-UP GENERAL OPERATION An engine manual is provided with the tack distributor and should be used whenever starting, operating, and servicing engine. TURN FLUSH VALVE ON BEFORE STARTING ENGINE TACK DISTRIBUTOR 7
20 OPERATION OF TACK DISTRIBUTOR Before putting the tack distributor into operation, make sure it has been secured so the unit does not roll or move unintentionally during operation. Follow the procedures below and use good safe operating practices when involved in the operation of the tack distributor.. Make sure all valves are off.. Check asphalt level in tank. It must be at least 3 above flue before lighting burners. 3. Open the valve on the propane tank. Remove the igniter from its stowed position. Open valve on igniter and light.. Regulate the propane pressure to 8 to 0 psi. (max) by adjusting knob on regulator. 5. To light burner, hold igniter flame in front of burner before opening gas valve. Now, light the other burner in the same manner. 6. After burner is lit, bring the liquid asphalt temperature to material specifications. (This should not exceed 90 deg. F or 88 deg. C). 7. Monitor temperature by referring to temperature gauge. 8. Turn flush valve on before starting engine. 9. After asphalt is at specified temperature start engine according to engine manual. 0. Turn off flush valve after engine is running.. Turn liquid asphalt tack on.. Unroll spray wand and spray tack. 3. While spraying, set relief for desired pressure (the least amount of pressure on relief, the longer the life of pump). Spray Wand Select. Spraying Tack: Tack valve should be on. Circulating valve should be closed. Spray Bar Select Distributor valve knob should be pulled out. Select spray bar or spray wand to use while spraying tack. 5. Spray wand selected: Open wand select valve to spray tack. Open valve on wand to spray. 6. Spray bar selected: Open nozzles desired on spray bar. Open and close spray bar select valve for spraying of tack. NOTE: When allowing machine to run for short periods of time without spraying, open circulating valve to relieve excessive pump pressure. 8 TACK DISTRIBUTOR
21 OPERATION OF SPRAY WAND AND SPRAY BAR 7. Back flush: Open circulating valve to let material flow back into tank. Close tack valve at bottom of tank. Push in distributor valve to retrieve material out of hose. 8. Wand: Open spray wand valve and allow 30 seconds before flushing. 9. Spray bar: Open spray bar select valve. Allow 30 seconds then close nozzle valve closest to center of spray bar. Allow 0 seconds then close the next valve towards outside of spray bar. Repeat until all nozzles are flush. Distributor Valve Circulating Valve Flushing spray wand: Close the circulating valve. Close the valve on the wand. Open the wand select. Pull out distributor valve knob. Open flush valve on hose coming out of flush tank. Open valve on wand and flush until you see flush material. Close valve on wand, and shutdown engine. Check all valves on machine to make sure they are all closed. Flushing spray bar: Close the circulating valve on tank. Open spraybar select valve to let material flow to bars. Pull out distributor valve knob. Open flush valve to let flush material go to spray bar. Open all nozzle valves one at a time, until flush material is visible; then close valves. Shut down engine and make sure all valves are shut. 0. Height of the Spray Bar may be adjusted by removing two bolts and raising or lowering the bar to desired height.. Six Spray Nozzles may be turned off or on individually or the entire bar may turned off or on through one valve. NOTE: When moving from one job site to another, turn the individual nozzle valves off to prevent dripping. TACK DISTRIBUTOR 9
22 PARTS INFORMATION In order to expedite locating and shipping of parts you may need, please refer to the following information:. All parts must be ordered by a LeeBoy dealer.. The model and serial number of the unit should be given when ordering parts. 3. Parts should be ordered by part number and description. 688 North Highway 6 Denver, North Carolina (70) TACK DISTRIBUTOR
23 MAJOR WEAR PARTS PART NO. DESCRIPTION 3090 BURNER NOZZLE, TACK TANK, SCREED 3000 BURNER NOZZLE, IGNITER 8000 PUMP, TACK 5050A CPLG. HALF, 5 HP ENGINE 8000 INSERT, 3 JAW CPLG CPLG. HALF, TACK PUMP 8000 VALVE, RELIEF 8090 BALL VALVE, /" 50090A WHEEL-TIRE ASSY., (-50/-500) SEAL KIT, PUMP 300 GAUGE, L.P.G. PRESS DECAL KIT DECAL KIT DECAL KIT 8030 TACK SPRAY NOZZLE 800 HOSE, HOSE REEL 688 North Highway 6 Denver, North Carolina (70) TACK DISTRIBUTOR
24 L50 Trailer , ITEM NO. QTY. PART NO. DESCRIPTION REFERENCE LOCATION 5000 HOSE REEL ASSY DRAIN PLUG SELECTOR VALVE ASSY. SEE PAGE LOWER LIQUID ASPHALT VALVE ASSY. SEE PAGE PROPANE TANK, 30#, L.P.G TANK ASSY., FLUSH MANIFOLD, L.P.G BURNER NOZZLE, TACK TANK, SCREED HEAT GAUGE/REGULATOR, L.P.G BURNER NOZZLE, IGNITER GAUGE, TEMPERATURE 8030 WAND, TACK SPRAY BATTERY BOX 500 ENGINE & PUMP ASSY., (HONDA) SEE PAGE PLUG, " N.P.T JACK STAND WHEEL, 5 LUG TACK TANK, DRAIN PIPING SPRAY BAR ASSY., 8 FT. SEE PAGE BATTERY 859 SPRAY SELECTOR VALVE ASSY., TRAILER SEE PAGE AXLE ASSY., IDLER 3500# SEE PAGE 3 * 5000C AXLE ASSY., BRAKE 3500# (*OPTIONAL) SEE PAGE 35 TACK DISTRIBUTOR
25 L50 Skid , ITEM NO. QTY. PART NO. DESCRIPTION REFERENCE LOCATION 5000 HOSE REEL ASSY DRAIN PLUG SELECTOR VALVE ASSY. SEE PAGE LOWER LIQUID ASPHALT VALVE ASSY. SEE PAGE PROPANE TANK, 30#, L.P.G TANK ASSY., FLUSH MANIFOLD, L.P.G BURNER NOZZLE, TACK TANK, SCREED HEAT GAUGE/REGULATOR, L.P.G BURNER NOZZLE, IGNITER GAUGE, TEMPERATURE 8030 WAND, TACK SPRAY BATTERY BOX 500 ENGINE & PUMP ASSY., (HONDA) SEE PAGE SPRAY SELECTOR VALVE, SKID SEE PAGE BALL VALVE, " BATTERY PLUG, " N.P.T. TACK DISTRIBUTOR 3
26 L50 Trailer , ITEM NO. QTY. PART NO. DESCRIPTION REFERENCE LOCATION 5000 HOSE REEL ASSY DRAIN PLUG SELECTOR VALVE ASSY. SEE PAGE LOWER LIQUID ASPHALT VALVE ASSY. SEE PAGE PROPANE TANK, 30#, L.P.G TANK ASSY., FLUSH MANIFOLD, L.P.G BURNER NOZZLE, TACK TANK, SCREED HEAT GAUGE/REGULATOR, L.P.G BURNER NOZZLE, IGNITER GAUGE, TEMPERATURE 8030 WAND, TACK SPRAY BATTERY BOX 500 ENGINE & PUMP ASSY., (HONDA) SEE PAGE B AXLE ASSY., BRAKE 500# SEE PAGE JACK STAND A WHEEL, 6 LUG TACK TANK, DRAIN PIPING SPRAY BAR ASSY., 8 FT. SEE PAGE BATTERY 859 SPRAY SELECTOR VALVE ASSY., TRAILER SEE PAGE PLUG, " N.P.T. TACK DISTRIBUTOR
27 L50 Skid , 7 6 ITEM NO. QTY. PART NO. DESCRIPTION REFERENCE LOCATION 5000 HOSE REEL ASSY DRAIN PLUG SELECTOR VALVE ASSY. SEE PAGE LOWER LIQUID ASPHALT VALVE ASSY. SEE PAGE PROPANE TANK, 30#, L.P.G TANK ASSY., FLUSH MANIFOLD, L.P.G BURNER NOZZLE, TACK TANK, SCREED HEAT GAUGE/REGULATOR, L.P.G BURNER NOZZLE, IGNITER GAUGE, TEMPERATURE 8030 WAND, TACK SPRAY BATTERY BOX 500 ENGINE & PUMP ASSY., (HONDA) SEE PAGE SPRAY SELECTOR VALVE, SKID SEE PAGE BALL VALVE, " BATTERY PLUG, " N.P.T. TACK DISTRIBUTOR 5
28 L500 Trailer , ITEM NO. QTY. PART NO. DESCRIPTION REFERENCE LOCATION 5000 HOSE REEL ASSY DRAIN PLUG SELECTOR VALVE ASSY. SEE PAGE LOWER LIQUID ASPHALT VALVE ASSY. SEE PAGE PROPANE TANK, 30#, L.P.G TANK ASSY., FLUSH MANIFOLD, L.P.G BURNER NOZZLE, TACK TANK, SCREED HEAT GAUGE/REGULATOR, L.P.G BURNER NOZZLE, IGNITER GAUGE, TEMPERATURE 8030 WAND, TACK SPRAY BATTERY BOX 800 BALL VALVE, " ENGINE & PUMP ASSY., (HONDA) SEE PAGE SPRAY BAR ASSM, 8' SEE PAGE HEATER, ELECTRIC 0V BATTERY HOSE ASSY., DISTRIBUTOR VALVE TO HOSE REEL HOSE ASSY., DISTRIBUTOR VALVE TO SPRAY BAR 859 SPRAY SELECT VALVE ASSY., TRAILER SEE PAGE 3 500A JACK STAND, TOWING TONGUE 3 500A PINTLE EYE ASSY., TOWING TONGUE 5000 PINTLE EYE B AXLE ASSY., BRAKE 500# SEE PAGE A AXLE ASSY., IDLER 500# SEE PAGE A WHEEL, 6 LUG 6 TACK DISTRIBUTOR
29 L500 Skid , Shown without heater Item 6 used to cap heater port. ITEM NO. QTY. PART NO. DESCRIPTION REFERENCE LOCATION 5000 HOSE REEL ASSY DRAIN PLUG SELECTOR VALVE ASSY. SEE PAGE LOWER LIQUID ASPHALT VALVE ASSY. SEE PAGE PROPANE TANK, 30#, L.P.G TANK ASSY., FLUSH MANIFOLD, L.P.G BURNER NOZZLE, TACK TANK, SCREED HEAT GAUGE/REGULATOR, L.P.G BURNER NOZZLE, IGNITER GAUGE, TEMPERATURE 8030 WAND, TACK SPRAY BATTERY BOX 500 ENGINE & PUMP ASSY., (HONDA) SEE PAGE BATTERY PLUG, " N.P.T BALL VALVE, " SPRAY SELECT VALVE ASSY., SKID SEE PAGE 3 TACK DISTRIBUTOR 7
30 L50 Hoses Trailer Skid ITEM NO. QTY. PART NO. DESCRIPTION 5006 HOSE ASSY., TANK VALVE RETURN TO LIQUID VALVE 3090 HOSE ASSY., FLUSH VALVE HOSE ASSY., TACK PUMP FEED 5007 HOSE ASSY., RELIEF VALVE TO UPPER TANK VALVE HOSE ASSY., UPPER VALVE TO HOSE REEL (SKID ONLY) ADAPTER, HOSE TO PIPE (SKID ONLY) HOSE, HOSE REEL 8 500A HOSE, SELECTOR VALVE TO HOSE REEL 9 500A HOSE, SELECTOR VALVE TO SPRAY BAR 8 TACK DISTRIBUTOR
31 L50/L500 Hoses Trailer Skid ITEM NO. QTY. PART NO. DESCRIPTION 5006 HOSE ASSY., TANK VALVE RETURN TO LIQUID VALVE 3090 HOSE ASSY., FLUSH VALVE HOSE ASSY., TACK PUMP FEED 5007 HOSE ASSY., RELIEF VALVE TO UPPER TANK VALVE HOSE ASSY., UPPER VALVE TO HOSE REEL (SKID ONLY) ADAPTER, HOSE TO PIPE (SKID ONLY) HOSE, HOSE REEL HOSE, SELECTOR VALVE TO HOSE REEL HOSE, SELECTOR VALVE TO SPRAY BAR TACK DISTRIBUTOR 9
32 Propane Tank Assembly ITEM NO. QTY. PART NO. DESCRIPTION PROPANE TANK, 30#, L.P.G BURNER NOZZLE, TACK TANK, SCREED HEAT BURNER NOZZLE, IGNITER 3000 REGULATOR W/ GAUGE, L.P.G MANIFOLD., L.P.G HOSE ASSY., L.P.G. IGNITER HOSE ASSY., L.P.G. TANK TO REGULATOR HOSE ASSY., L.P.G. MANIFOLD TO BURNER NOZZLE P.O.L. ADAPTOR, L.P.G. TANK COUPLING, /" PIPE VALVE, /" 300 ELBOW, /" F.P.T. x /" M.P.T GAUGE, L.P.G. PRESS. 30 TACK DISTRIBUTOR
33 9 5 Engine & Pump Assembly ITEM NO. QTY. PART NO. DESCRIPTION 5000H ENGINE, HONDA 5HP 5000 ENGINE, BRIGGS & STRATTON 5 HP 5060 ADAPTER, PUMP TO ENGINE A CPLG. HALF, 5 HP ENGINE 8000 INSERT, 3 JAW CPLG CPLG. HALF, TACK PUMP PUMP, TACK NIPPLE, /" x " LG VALVE, RELIEF ADAPTER, PIPE TO HOSE (90 DEG.) ADAPTER, PIPE TO HOSE (TEE) 000A LINE, RELIEF VALVE ADAPTER, PIPE TO HOSE (90 DEG.) SEAL KIT, PUMP * 5000HE ENGINE (OPTIONAL), HONDA 5 HP W/ ELEC. START Lower Liquid Asphalt Valve Assembly 9 7 ITEM NO. QTY. PART NO. DESCRIPTION NIPPLE, " PIPE x CLOSE 8070 ELBOW, "PIPE CROSS, " PIPE 800 BALL VALVE, " BUSHING, HEX HEAD "x /" NIPPLE, /" PIPE x CLOSE BALL VALVE, /" ADAPTER, PIPE TO HOSE ADAPTER, PIPE TO HOSE TACK DISTRIBUTOR 3
34 3 Selector Valve Assembly ITEM NO. QTY. PART NO. DESCRIPTION VALVE, SELECTOR 8070 NIPPLE, /" PIPE x CLOSE BALL VALVE, /" ADAPTER, PIPE TO HOSE TEE, /" PIPE 3 5 Spray Select Valve Assembly, Trailer ITEM NO. QTY. PART NO. DESCRIPTION ELBOW, STREET /" NPT 8090 BALL VALVE, /" ADAPTER, PIPE TO HOSE NIPPLE, /" x 5 /" LG NIPPLE, /" PIPE x CLOSE TEE, /" PIPE 3 Spray Select Valve Assembly, Skid 5 3 ITEM NO. QTY. PART NO. DESCRIPTION NIPPLE, /" PIPE x CLOSE 800 TEE, /" PIPE ELBOW, STREET /" NPT 8090 BALL VALVE, /" ADAPTER, PIPE TO HOSE TACK DISTRIBUTOR
35 Spray Bar Assembly ITEM NO. QTY. PART NO. DESCRIPTION MOUNTING ASSY., SPRAY BAR 8598 SPACER, SPRAY BAR ARM ARM, SPRAY BAR ARM 8593 SPRAY BAR, MOUNTING BRKT MANIFOLD NUT, FRICTION PIN, CLEVIS TEE, " 3000# SCH PLUG, " PIPE BUSHING, " M.P.T. x /" F.P.T NIPPLE, /" PIPE x CLOSE BALL VALVE, / " BUSHING, /" M.P.T. x /" F.P.T NOZZLE, TACK SPRAY NIPPLE, " PIPE x 8" LONG ADAPTER ELBOW, PIPE TO HOSE HOSE ASSY., MANIFOLD TO L.H. ARM HOSE ASSY., MANIFOLD TO R.H. ARM CLIP, CLEVIS PIN TACK DISTRIBUTOR 33
36 L50 Idler Axle Assembly 8 6, 5 9 0, 7, 3 3, 5 ITEM NO. QTY. PART NO. DESCRIPTION 5000 AXLE ASSY., IDLER 3500# WHEEL HUB ASSY., 3500# CUP, ROLLER BEARING 5080 CONE, ROLLER BEARING CUP, ROLLER BEARING CONE, ROLLER BEARING WHEEL STUD WHEEL SEAL, 3500# GREASE CAP, 3500# LUG NUT SPRING, AXLE U-BOLT KIT, 3500# HEX CROWN AXLE NUT D-HOLE FLAT WASHER LOCKWASHER ITEM INCLUDES ITEMS 3 THRU 0. 3 TACK DISTRIBUTOR
37 L50 Axle & Brake Assembly , ITEM NO. QTY. PART NO. DESCRIPTION 8, 5 8, C AXLE ASSY., BRAKE 3500# 5050 BRAKE DRUM ASSY., 3500# CUP, ROLLER BEARING 5080 CONE, ROLLER BEARING WHEEL STUD WHEEL SEAL 3500# GREASE CAP 3500# LUG NUT CUP, ROLLER BEARING CONE, ROLLER BEARING 5060R BRAKE ASSEMBLY 3500R 5060L BRAKE ASSEMBLY 3500L BRAKE SHOE KIT x 300A BRAKE ADJUSTER ELECTRO-MAGNET SPRING, AXLE 3500# U-BOLT KIT 3500# AXLE NUT D-WASHER LOCKWASHER 3030 SPRING KIT 300B SPRING ITEM INCLUDES ITEMS 3 THRU 0. ITEM INCLUDES ITEMS 3 THRU 5. ITEM INCLUDES ITEMS 3 THRU 5. TACK DISTRIBUTOR 35
38 L500 Idler Axle Assembly 8 3, 9 0, 7 6, 5 5, 3 ITEM NO. QTY. PART NO. DESCRIPTION 5000A AXLE ASSY., IDLER 500# 600 WHEEL HUB ASSY., 500# CUP, ROLLER BEARING 600 CONE, ROLLER BEARING CUP, ROLLER BEARING CONE, ROLLER BEARING WHEEL STUD WHEEL SEAL 500# GREASE CAP 500# LUG NUT 50060A SPRING, AXLE 500# 50050A U-BOLT KIT 500# HEX CROWN AXLE NUT D-WASHER LOCKWASHER ITEM INCLUDES ITEMS 3 THRU TACK DISTRIBUTOR
39 L50/L500 Axle & Brake Assembly 6 9, , ITEM NO. QTY. PART NO. DESCRIPTION 8, 5 8, B AXLE ASSY., BRAKE 500# BRAKE DRUM ASSY., 500# CUP, ROLLER BEARING 600 CONE, ROLLER BEARING WHEEL STUD WHEEL SEAL 500# GREASE CAP 500# LUG NUT CUP, ROLLER BEARING CONE, ROLLER BEARING 30060R BRAKE ASSEMBLY 500R 30060L BRAKE ASSEMBLY 500L A BRAKE SHOE KIT x 30 0-A BRAKE ADJUSTER ELECTRO-MAGNET A SPRING, AXLE 500# A U-BOLT KIT 500# AXLE NUT D-WASHER LOCKWASHER 3030 SPRING KIT 300B SPRING ITEM INCLUDES ITEMS 3 THRU 0. ITEM INCLUDES ITEMS 3 THRU 5. ITEM INCLUDES ITEMS 3 THRU 5. TACK DISTRIBUTOR 37
40 Other Members of the LeeBoy Family of Products... 85OO Elite II Ashpalt Paver 685 Motor Grader O Pneumatic Roller 80OO Ashpalt Paver 00 Vibratory Roller 00S Maintainer 688 North Highway 6 Denver, North Carolina (70) 83-97
OPERATIONS MANUAL MODEL MT-500
OPERATIONS MANUAL MODEL MT-500 Machine Serial Number: Specification Number: Engine Serial Number: SOLD & SERVICED BY SAFETY PRECAUTIONS AS STATED IN OSHA, THE EMPLOYER SHALL PERMIT ONLY THOSE EMPLOYEES
More informationParts Manual. Model: 1550-D
Parts Manual Model: 550-D Covers 50-K-50TKZ8Y2-0250 through Sold & Serviced By: Contents Quick Order List... Hopper and Plastic...3 Push Beam and Sight Gauge...5 Engine Compartment...7 Hood Assembly...9
More information4750 Drill. Repair Parts
4750 Drill Repair Parts #615997-2016 Identification Your CrustBuster drill is identified by a Serial Number and Model Number. Record these numbers in the spaces provided in this manual and refer to them
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG BUNN-O-MATIC CORPORATION
8 4 0 0 1 BUNN Espress ES 2C DISCONTINUED VERSION Parts listed in this catalog may no longer be available. 12 0,5 1,5 CL 2 16 2,5 CAUTION HOT Liquid-Steam-Surfaces OFF ON ILLUSTRATED PARTS CATALOG Designs,
More informationLIMITED WARRANTY DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES
Published 08/15 LIMITED WARRANTY Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized Bush Hog dealer, that the equipment be free from defects in material
More informationLubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser
INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber
More informationCLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER" CRD600AF Automatic Fitting Inserter With Auto Feed OPERATIONS MANUAL (Shown with optional alcohol dispenser) 1 VERSION 1.1 LAST EDITED
More informationAuto-Locking Pintle Hook
Auto-Locking Pintle Hook 7-Ton Capacity Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationATD Gallon Pressurized Oil Drain Owner s Manual
ATD-5203 30 Gallon Pressurized Oil Drain Owner s Manual TECHNICAL SPECIFICATIONS Model: ATD-5203 Capacity: 30 Gallon Drain Funnel Working Height: 47.25 to 70.5 Drain Funnel Diameter: 15.75 Plastic Tray:
More informationCRUSTBUSTER OWNER / OPERATOR MANUAL
CRUSTBUSTER OWNER / OPERATOR MANUAL MODEL # CB-1 CRUSTBUSTER Manufactured by: LEWIS BROTHERS MANUFACTURING, INC. Post Office Box 146 Baxley, GA 31513 Tel: (912) 367-4651 Fax: (912) 367-3958 5-2-17 1 INTRODUCTION
More informationCRD610 Automatic Fitting Inserter
CRD610 Automatic Fitting Inserter OPERATIONS MANUAL VERSION 1.2 LAST EDITED 12.12.2018 cleanroomdevices.com 1 Table of Contents Title Page. 1 Table of Contents...2 1.0 General Product & Safety Information....3
More informationUSER'S REFERENCE INFORMATION
USER'S REFERENCE INFORMATION DELIVER DATE EQUIPMENT SERIAL NO TYPE ENGINE DEALER'S NAME & ADDRESS ENGINE NO EQUIPMENT HOURS ***CALIFORNIA*** PROPOSITION 65 WARNING DIESEL ENGINE EXHAUST AND SOME OF ITS
More informationJOHN DEERE 9970 COTTON PICKERS
PARTS CATALOG FOR Mud Hog System II Rear Wheel Drive FOR JOHN DEERE 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center OEM Aftermarket JD40005 JD47655 82, 90, 94, 106 TUTHILL Drive Systems 9098 West
More informationAuto-Locking Trailer Coupler
Auto-Locking Trailer Coupler 7-Ton Capacity Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationLEWIS WINDROWER OWNER / OPERATOR MANUAL
LEWIS WINDROWER OWNER / OPERATOR MANUAL MODEL # WR-1 WINDROWER Manufactured by: LEWIS BROTHERS MANUFACTURING, INC. Post Office Box 146 Baxley, GA 31513 Tel: (912) 367-4651 Fax: (912) 367-3958 2-21-14 1
More informationOwner s Manual Supplement. Liquefied Petroleum Gas (LPG) Fuel System for 1998 GM Medium Duty Chassis (C-60/C-70) with 6.0L and 7.
Owner s Manual Supplement Liquefied Petroleum Gas (LPG) Fuel System for 1998 GM Medium Duty Chassis (C-60/C-70) with 6.0L and 7.0L V8 OWNERS MANUAL SUPPLEMENT Table of Contents Refueling Your Vehicle...1
More informationMetroPrime 22MPC Self-Priming Centrifugal Pump
Page 1 of 6 prevent priming or reduce pump capacity. OPERATION The 22 MPC-Metropolitan Pump is a self-priming centrifugal pump and only requires priming prior to its initial start. The pump will retain
More information25 GALLON PORTABLE OIL LIFT
25 GALLON PORTABLE OIL LIFT Model 92859 SET UP AND OPERATING INSTRUCTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly
More informationEMISSION CONTROL WARRANTY STATEMENT
EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS The California Air Resources Board, U.S. EPA and Zenith Power Products LLC (ZPP) are pleased to explain the emission control system
More informationRichmond Conveyor. Hydraulic Ultimate Manual. January 2013
Richmond Conveyor Hydraulic Ultimate Manual January 2013 Table of Contents Operators Manual Removing conveyor from truck Maintenance checklist Maintenance kit material list Safety information Index Installation
More informationPro Shot Grease Dispense Valve
Instructions Parts List Pro Shot Grease Dispense Valve 309032J For high pressure grease dispense. 8000 psi (55 MPa, 552 bar) Maximum Working Pressure Model No. 242055, Series B, 1/4 npt Fluid Inlet Model
More informationASSEMBLY / OPERATION INSTRUCTIONS. Low Profile Motorcycle Dolly
ASSEMBLY / OPERATION INSTRUCTIONS 1,500LB CAPACITY Low Profile Motorcycle Dolly Model: 03-CG1500-01(B1) WARNING BEFORE USE PLEASE READ ALL WARNINGS AND INSTRUCTIONS TO PREVENT SERIOUS INJURY Drop-Tail
More informationHYDRAULIC LEVELING SYSTEMS OPERATIONS MANUAL (For systems with touch pad part number , , , , or no number at all)
HYDRAULIC LEVELING SYSTEMS OPERATIONS MANUAL (For systems with touch pad part number 500089, 500105, 500210, 500456, 500535 or no number at all) Visit us on the web at www.powergearus.com 82-L0040-01 Rev.
More informationMulti-Ject Aerator Model no.: BA-400 Operation & Parts Manual
Multi-Ject Aerator Model no.: BA-400 Operation & Parts Manual P a g e 2 Table of Contents Cover Page 1 Table of Contents 2 Welcome to Bannerman 3 Warranty 4 Work Safety 5 Three Point Hitch Attachment Procedure
More informationLUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type
INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)
More informationMODEL HD-BTC. Installation, Operation & Repair Parts Information REV041416
MODEL HD-BTC Installation, Operation & Repair Parts Information REV041416 TABLE OF CONTENTS SAFETY INSTRUCTIONS 1 DEFINITIONS 1 SPECIFICATIONS 2 INSTALLATION INSTRUCTIONS 2 OPERATING INSTRUCTIONS 2 MAINTENANCE
More informationMEX (55) QRO (442) Web Controls
Web Controls SINGLE AND DUAL ROTOR TENSION CONTROL BRAKES MODELS:,,,, AND INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS Read this manual carefully, making full use of its explanations and instructions.
More informationParts 3A2528C EN. Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers
Parts Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers 3A2528C EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use
More informationCLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER" CRD600 Automatic Fitting Inserter OPERATIONS MANUAL VERSION 2.1 LAST EDITED 7.25.14 DOCUMENT NUMBER 001 cleanroomdevices.com 1 Table of
More informationPOWER GEAR SLIDE-OUT MANUAL
POWER GEAR SLIDE-OUT MANUAL Operation Guide FLUSH FLOOR SLIDE-OUT SYSTEM FOR AMERICAN COACH PRODUCTS 82-S0220-01 Rev. 1 AMERICAN COACH SLIDE-OUT MANUAL FLUSH FLOOR SYSTEM TABLE OF CONTENTS SECTION PAGE
More informationTube Fired Hot Tack Distributors
www. Tube Fired Hot Tack Distributors 600 & 1,000 Gallon Capacity LD600T Marathon pumping distributors will save time on road maintenance, road construction, airport work, parking lots or wherever hot
More informationPressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings -
Instructions Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 311082D Pressure Roller with 24-inch Fixed Extension - For application of architectural
More informationHEAVY-DUTY STEEL WAGON
HEAVY-DUTY STEEL WAGON Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationOPERATOR S MANUAL. MODEL ORDER # MODEL HD 2.0/10 Ed HE D HD 1.8/14 Ed HE D
OPERATOR S MANUAL MODEL ORDER # MODEL HD 2.0/10 Ed 1.575-400.0 HE-201006D HD 1.8/ Ed 1.575-401.0 HE-2006D To locate your local Kärcher Commercial Pressure Washer Dealer nearest you, visit www.karchercommercial.us
More informationSTAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications
STAINLESS STEEL FORGED FITTINGS 3000lb 304/304L & 316/316L Forged Stainless Steel Fittings Product Specifications Manufactured in ISO9000:2000 Facility Manufactured to ASTM/ASME A182/SA182 Items conform
More informationMODEL EF Full Circle Tire Spreader
MODEL EF Full Circle Tire Spreader Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV. 062917 P/N: 81-0050C CAUTION
More informationINSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE
INSTRUCTIONS PARTS LIST 308 493 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. A Second Gun Hose Kit 100 psi (6.9 bar) Maximum Working Pressure These kits include
More information900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX
900 SERIES SPLIT CASE FIRE PUMP REPAIR PARTS INDEX Read and understand the pump and motor instructions before attempting to install, disassemble or repair the pump. Part # AF-03-326 2015 Pentair Ltd. 01/30/15
More informationAdjustable Steel Welding Table
Adjustable Steel Welding Table Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationMODELS 94100, 94300, and BARE REEL SERIES A OWNER/OPERATOR MANUAL
MODELS 94100, 94300, and 94500 BARE REEL SERIES A OWNER/OPERATOR MANUAL SPECIFICATIONS Maximum working pressure Models 94300 & 94100 (Bare Reels) 2500 PSI (See Note 1) Models 94500 (Bare Reel) 8000 PSI
More informationModel , Series A 9 in. (23 cm) roller frame with 45 angle and 12 in. reach 1/2 in. (13 mm) nap roller cover
Operating Instructions 309899 Rev. A This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS Manufactured by Model 246818, Series A 9 in. (23 cm) roller frame
More informationAdjustable Shop Stool with Backrest
Adjustable Shop Stool with Backrest Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationSP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS
OWNER'S MANUAL SP-850 INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not
More informationHeavy-Duty Welding Fabrication Table
Heavy-Duty Welding Fabrication Table with Fix-Up Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and
More informationAir-Operated Waste Oil Drainer
Air-Operated Waste Oil Drainer 20-Gallon Tank Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationCRD600 Automatic Fitting Inserter
CRD600 Automatic Fitting Inserter OPERATIONS MANUAL VERSION 2.3 LAST EDITED 12.07.2018 cleanroomdevices.com 1 Table of Contents Title Page.. 1 Table of Contents. 2 1.0 General Product & Safety Information...3
More informationMODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO.
9-0688 MODEL NO. 00-800 & UP MODEL NO. 0-800 & UP MODEL NO. 5-800 & UP MODEL NO. -800 & UP MODEL NO. 0-800 & UP SKID SPRAYER with the Centrifugal Pump FORM NO. 95-9095 SET-UP AND PARTS CATALOG SAFETY AND
More informationHydraulic Bead Breaker Kit
Hydraulic Bead Breaker Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG BUNN-O-MATIC CORPORATION
BUNN TWF-EZ DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement
More informationParts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
More information110 Volt/12 Volt Portable Inflator
110 Volt/12 Volt Portable Inflator Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationManufacturing Facility is ISO9001:2000. Welded Steel Pipe Conform to ASTM A53. Threads Conform to ASME B1.20.1
STEEL NIPPLES S40 & S80 Steel Nipple Product Specifications Manufacturing Facility is ISO9001:2000 Welded Steel Pipe Conform to ASTM A53 Threads Conform to ASME B1.20.1 800-678-2544 800-678-0857 www.msi-products.com
More information60in. Acreage Rake. Owner s Manual
60in. Acreage Rake Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationMODEL BARE REEL SERIES E
MODEL 84275 BARE REEL SERIES E SPECIFICATIONS Maximum working pressure 5000 p.s.i. Material Inlet 1/2 NPT (Female) Material outlet 1/2 NPT (Female) Sheave width 10 Sheave diameter 19-1/4 Drum diameter
More informationHP30 Slab Saw Owner s Manual and Operating Instructions
HP30 Slab Saw Owner s Manual and Operating Instructions MADE IN USA Revision 07 09.0 Manual Part No. 67 Caution: Read all safety and operating instructions before using this equipment. This manual MUST
More informationParts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )
2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum
More informationWarnings and Precautions FAILURE TO READ, UNDERSTAND AND FOLLOW THESE INSTRUCTIONS MAY LEAD TO SERIOUS INJURY OR DEATH!
Instruction Booklet 2006 Summit ATV Pak-Mule Single Axle 84000 Summit ATV Pak-Mule Tandem Axle 84002!! READ ME FIRST!!! Please read carefully BEFORE using you new Summit ATV Product. Congratulations! You
More informationCRD400 Fitting Inserter OPERATIONS MANUAL
CRD400 Fitting Inserter OPERATIONS MANUAL ORIGINAL INSTRUCTIONS VERSION 3.4 LAST EDITED 01.07.2019 www.cleanroomdevices.com 1 Table of Contents Title Page.. 1 Table of Contents... 2 1.0 General Product
More informationOPERATORS MANUAL for MANUAL RV LEVELING SYSTEM. Comment [KO1]:
OPERATORS MANUAL for MANUAL RV LEVELING SYSTEM Comment [KO1]: 82 L0356 Rev. 0 June 2003 TABLE OF CONTENTS OPERATION AND MAINTENANCE...1 OPERATION CAUTION NOTES...1 BEFORE YOU OPERATE THE SYSTEM...2 SELECTING
More informationATV Log Skidding Arch
ATV Log Skidding Arch Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationMODEL 5500 Tire Repair Station
MODEL 5500 Tire Repair Station Installation, Operation and Repair Parts Information Branick Industries, Inc. 4245 Main Ave P.O. Box 1937 Fargo, North Dakota 58103 P/N: 81-0047C TABLE OF CONTENTS SAFETY
More informationMODEL 5120 Tire Repair Station
MODEL 5120 Tire Repair Station 00-0049 Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV01182017 P/N: 81-0058G CAUTION
More informationExtreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual
Extreme Duty Grapple (Rock, Skeleton, Scrap & Tine) Operation and Maintenance Manual Revision Date: May 12, 2017 Skid Pro PO Box 982 Alexandria, MN 56308 Toll Free: 877-378-4642 www.skidpro.com TABLE OF
More information16 Inch Surface Cleaner
16 Inch Surface Cleaner Owner s Manual WARNING: Read and understand all instructions, warnings, and cautions before using this product. Failure to follow the instructions, warnings, and cautions may result
More informationStainless Steel Air Motor Conversion Kits
Instructions Stainless Steel Air Motor Conversion Kits 096B Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Graco Inc. P.O. Box
More informationCLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER"
CLEAN ROOM DEVICES, LLC "WHERE TUBING AND FITTINGS COME TOGETHER" CRD400 Fitting Inserter OPERATIONS MANUAL VERSION 3.1 LAST EDITED 03.08.11 DOCUMENT NUMBER 001 cleanroomdevices.com 1 Table of Contents
More informationProteus 20B 20 Automatic Scrubber
Proteus 20B 20 Automatic Scrubber Parts List & Service Manual The contents of this manual are based on the latest product information available at the time of publication. Pacific reserves the right to
More informationGarden Hose Reel with 3/4In. x 100Ft. Hose. Owner s Manual
Garden Hose Reel with 3/4In. x 100Ft. Hose Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More information4745 Drill OWNER'S MANUAL (06-08) #
4745 Drill OWNER'S MANUAL (06-08) # 605865 Identification Your CrustBuster drill is identified by a Serial Number and Model Number. Record these numbers in the spaces provided in this manual and refer
More informationHeavy-Duty Drywall Dolly Cart
Heavy-Duty Drywall Dolly Cart Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information3000-Lb. Vehicle Positioning Jacks. Owner s Manual
3000-Lb. Vehicle Positioning Jacks Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationModel ET 5000W Operation and Service Manual
Model ET 5000W Operation and Service Manual Patented 5/16 BALL Load Capacity: 5000 lbs The ET 5000W ESCALATE TRAILER offers ground level roll-on loading and roll-off unloading of equipment with non-tilting
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG
TU3Q DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement parts
More informationHydroTote Trailer Hydroject Aerator
Form No. 3355 89 Rev. C HydroTote Trailer Hydroject Aerator Model No. 09833 Serial No. 6000000 and Up Operator s Manual English (EN, GB) Contents Page Introduction................................. Safety......................................
More informationSLAB SAW SERIES PARTS LIST
SLAB SAW SERIES PARTS LIST MODELS: HP Part# 020 HP20 Part# 02020 HP2 Part# 0202 MADE IN USA MADE IN USA Revision 09.20 Manual Part No. 6269 Caution: Read all safety and operating instructions before using
More informationAngle Grinder Holder
Angle Grinder Holder Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationMODEL G300 BRAKE BLEEDER
MODEL G300 BRAKE BLEEDER Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV120716 P/N: 81-0035H THIS PAGE INTENTIONALLY
More informationMini Lever Hoist. Owner s Manual
Mini Lever Hoist Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationOperator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0
Operator s Manual Nitro 750 Nitro 750X Nitro 1000 Nitro 1000X September.27.2018REV0 Table of Contents Introduction...3 Safety.....4 Equipment Requirements......5 What You Have Received. 5 Serial Number...6
More informationMODEL L/R/EF Sectional Tire Spreader
MODEL L/R/EF Sectional Tire Spreader Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV08032016 P/N: 81-0195E TABLE
More informationManual Chain Hoist. Owner s Manual
Manual Chain Hoist Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More information1000-Lb. Drum Truck. Owner s Manual
1000-Lb. Drum Truck Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationOWNER S MANUAL Z SERIES TRACKS. Rev. 355_05
OWNER S MANUAL Z SERIES TRACKS Rev. 355_05 LOEGERING 800-373-5441 15514 37 th Street SE 701-347-5441 Casselton, ND 58012 USA Fax: 701-347-4323 E-Mail: lmi@loegering.com Internet: www.loegering.com Loegering
More information6-TON DOUBLE LOCKING JACK STANDS OWNER S MANUAL
6-TON DOUBLE LOCKING JACK STANDS OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationHydraulic Drum Transporter
Hydraulic Drum Transporter Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationStainless Steel Air Motor Conversion Kits
Instructions Stainless Steel Air Motor Conversion Kits 096D Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Installation Pressure
More informationOwner s Manual. Instructions for Assembly, Testing, Operation, and Servicing. Trailer Kit: High speed upgrade kit used with Item# WARNING
M268176D.1 ITEM NUMBER: 268176 SERIAL NUMBER: Owner s Manual Instructions for Assembly, Testing, Operation, and Servicing Trailer Kit: High speed upgrade kit used with Item# 268175 WARNING READ and UNDERSTAND
More informationMODEL 810 INTRUDER INSTALLATION, OPERATION, MAINTENANCE & PARTS
OWNER'S MANUAL MODEL 810 INTRUDER INSTALLATION, OPERATION, MAINTENANCE & PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors
More informationOWNER S GUIDE 8A DURALIFT II 13,200 LB. CAPACITY. Link Mfg. Ltd th St. N.E. Sioux Center, IA USA
OWNER S GUIDE 8A000715 DURALIFT II 13,200 LB. CAPACITY Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 www.linkmfg.com QUESTIONS? CALL CUSTOMER SERVICE 1-800-222-6283 DEALER / INSTALLER:
More informationDolly with Pneumatic Tires
Dolly with Pneumatic Tires Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationOPERATOR S MANUAL HD 2.3/24 P CD HD 2.3/23 P CD
OPERATOR S MANUAL Model Order # Model HD 2.3/24 P - 1.575-350.0 CD-232336 HD 2.3/23 P - 1.575-351.0 CD-232437 To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit www.karchercommercial.us
More informationOPERATOR S MANUAL HD 2.3/24 P CD HD 2.3/23 P CD
OPERATOR S MANUAL Model Order # Model HD 2.3/24 P - 1.575-350.0 CD-232336 HD 2.3/23 P - 1.575-351.0 CD-232437 To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit www.karchercommercial.us
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG
BUNN T3,T3A T6,T6A DISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment or replacement
More information55-Gallon Drum Cradle
55-Gallon Drum Cradle Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationElectric Chainsaw Sharpener With Bar Mount
Electric Chainsaw Sharpener With Bar Mount Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationMODEL V-24 OWNER'S MANUAL PARTS
OWNER'S MANUAL MODEL V-24 PARTS NOTE: MANUAL including SPECIFICATIONS, subject to change without notice All ratings specified are based on structural factors only, not vehicle capacities or capabilities.
More informationOWNER S MANUAL. LOEGERING th Street SE Casselton, ND USA Fax:
OWNER S MANUAL TRAIL BLAZERS and D SERIES TRACKS LOEGERING 800-373-5441 15514 37 th Street SE 701-347-5441 Casselton, ND 58012 USA Fax: 701-347-4323 E-Mail: lmi@loegering.com Internet: www.loegering.com
More informationEURO REEL
Date Purchased Machine Serial No. Options The key number system in this parts book is arranged as follows: Please order parts by number - Key numbers with two circles denotes main assemblies. - Key numbers
More informationHOT AIR LANCE PART MANUAL Rev. A
HOT AIR LANCE PART MANUAL - 26410 Rev. A 10/12/09 2 TABLE OF CONTENTS Parts Check List... 4 Safety Precautions... 5 Limited Warranty... 6 Warranty Claim Instructions... 7 Operating Instructions Start Up...
More informationBX7322 Adventurer Tow Bar Operator Manual & Installation Instructions
Please visit www.blueox.com for the latest version of these installation instructions. BX7322 Operator Manual & Installation Instructions Serial Number (5,000 lb) 2 Inch Coupler 292-1263 Rev J Page 1 of
More information