W E L L S I T E S E R V I C E S
|
|
- Paul Black
- 6 years ago
- Views:
Transcription
1 WELL SITE SERVICES
2 TABLE OF CONTENTS Frac Stack and Flow Control High Pressure Sand Removal System...FSFC-1a-d SPS Type 7 Manual and Hydraulic Frac Valve...FSFC-2a-b Frac Stacks...FSFC-3 High Pressure Manifolds...FSFC-4 High Pressure Frac Ball Catchers...FSFC-4 Blowout Preventers...FSFC-5 STS Plug Catcher...FSFC-6a-b 2 Max Orifi ce Hydraulic Choke...FSFC-7a-b Chunk Choke - Model C...FSFC-8 SPS Material H2S Compatibility...FSFC-9 Complete Surface Equipment Rentals...FSFC-10a-b
3 Frac Stack & Flow Control Product List PLACE HOLDER
4 Specialty Rental Tools & Supply
5 High Pressure Sand Removal System (HPSRS) Product Description: Specialty Rental Tools & Supply has a patented, specialized high pressure sand and solid removal system HPSRS. The 11 15,000 psi system utilizes an 11 bore spool with 3 15,000 psi working pressure inlets and outlet. The flow enters through the top of the HPSRS through a 3 inlet and dumps into the 11 bore spool. At this point the velocity slows down and flow is diverted over a baffle allowing the solid to drop to the bottom of the eleven inch spool. The solids can be dumped from the system as needed. The flow, less the solids, is channeled to the top of the unit where it exits out of the 3 outlet spool. To facilitate best results, we recommend the use of a hydraulic choke and a hydraulic valve on the dump side of the unit. Other systems available: 11 10,000# working pressure * 13 5/8 10,000 psi & 15,000 psi working pressures. FSFC-1a
6 High Pressure Sand Removal System (HPSRS) Product Design Highlights: The system consists of the following major components: An inlet spool located on top of the unit An outlet spool located on top of the unit facing sideway A large bore spool connecting the top flange and bottom flange, creating a chamber A sand reservoir and dump outlet at bottom of the unit A tube connected to the inlet at the top and open at the bottom, with a baffle below the opening and a plate wind around it in a helical fashion (pictured below) Product Specifications: 7 1/16 Unit up to 125 MMCFD 11 Unit up to 300 MMCFD 13 5/8 Unit up to 400 MMCFD Flow Capacity Skid Dimensions Vertical / Transportation / Skid Horizontal / Operating / Skid 190 x 90 Approx. 170 x 90 Approx. Weights (Including Skid and piping) Approx. 7 1/16 10M 17,000 Lbs M 28,000 Lbs. 13 5/8 10M 33,000 Lbs. 7 1/16 15M 21,000 Lbs. 7 1/16 20M 28,000 Lbs M 32,000 Lbs. 13 5/8 15M 38,000 Lbs. User list available on request. FSFC-1b
7 High Pressure Sand Removal System (HPSRS) The sand particles removal mechanism: Stage 1: High pressure well fluid flows into the unit through the top inlet, into the tube flowing downward, until the fluid is diverted over the baffle. The inertia created by downward velocity will cause the sand particles to drop into the bottom of the spool, while the fluid (less the particles) will turn around and channel to the top of the unit where it exits out of the outlet spool. Stage 2: When the fluid and remaining particles travel upward in the chamber, the centrifugal force created by the helical plate will toss the remaining sand particles to perimeter of the chamber. The particles fall downward, along perimeter, to the bottom of the chamber, while the sand free fluid exits for the outlet spool. FSFC-1c
8 High Pressure Sand Removal System Product Advantages: Functions at wellhead pressure Reduces or eliminates damages to downstream equipment Cost effective compared to cost of damages API certified components High production capacity Field proven result FSFC-1d
9 SPS Type 7 1/16 5M - 15M QT Manual And Hydraulic Frac Valve Product Description and Features: Metal-to-metal sealing at the gate-to-seat Available studded or flanged A truly symmetric bi-directional design A metal-to-metal stem backseat on both the upper stem and tail rod to permit replacement of either stem packing with the valve cavity under pressure Design meets API 6A and PSL 3. All materials meet and exceed specified criteria including NACE MR criteria Size of Frac Valve (4 1/16, 5 1/8 and 7 1/16) The 5 1/8 Frac Valve Available in 10M Working Pressure only Size of Gate Valve (1 13/16, 2 1/16, 2 9/16, 3 1/16, 4 1/16 bores) Available Working Pressure 5M 20M Temperature rate is P + U (-20 ~ 250F) and material class is DD (sour service ) Ball Screw is used for most of manual valves, which reduces the required work to operate the valves to less than 1/3 of that required to operate the conventional design. The ball screw uses rolling friction in place of sliding friction. The low torque and reduced number of turns allows the valve to be stroked in less time with less effort than conventional high pressure valve designs. FSFC-2a
10 SPS Type 7 1/16 5M - 15M QT Manual And Hydraulic Frac Valve Number of Valve Input Torques Size Revolutions To Fully Before Cracked Open After Cracked Open Open or Close Valve Ft-lb N.m Ft.lb N.m 3-1/16, 20k 15-3/ /16, 15k /16, 20k /8, 10k 23-1/ /16, 10k /16, 15k FSFC-2b
11 Frac Stacks Product Description: To handle numerous flow-back operations on high-pressure wells, STS provides Frac Stacks in most every size and schematic. Offered in both manual and hydraulic systems, our assortment of frac valve sizes (4-1/16, 5-1/8, 7-1/16 bores) and gate valve sizes (1-13/16, 2-1/16, 2-9/16, 3-1/16, 4-1/16 bores) can handle working pressures of 5,000, 10,000, 15,000, and 20,000 PSI. To minimize operating torque, these valves are available with quick turn hand-wheel or hydraulic actuators. The quick turn design incorporates a ball screw assembly that allows easy operation under pressure, even for large bore systems. To minimize repair costs, the frac and gate valves also incorporate retainer plates on both sides of the gates to extend the life of the valve cavity. Between this rugged construction and ease of use, STS s Frac Stacks ensure a quality that our customers have come to expect. We also carry a full line of work baskets, check valves, Kelly valves, frac heads, and other equipment that our customers require, complimenting their Frac Stack rental. FSFC-3
12 High Pressure Manifolds Product Specifications: Whatever the well-control operation demands, STS can provide the right high pressure manifold in various sizes and configurations up to 20,000 PSI working pressure. Depending upon the degree of control or the specifications required STS manifold assemblies are available with plug or gate valves, manual or hydraulic chokes, and with or without skids. To increase productivity and maximize efficiency, STS offers many configurations that allow operators to flow back for longer periods without having to shut down to change trim. And when a trim change is required, the STS design reduces the time needed to switch out trim to 20 minutes, compared to 45 minutes or longer with other designs. Besides the manifold s incorporating valves, chokes, and pressure sensors, STS can provide all supplemental equipment including accumulators, air compressors, generators, and remote hydraulic command centers. High Pressure Frac Ball Catchers Product Specifications: As with any flow-back operation, particularly those of gas producing wells, the number of shut-ins relies heavily on the type of equipment that can handle high pressures. Disruptions in the flow stream greatly reduce the efficiency of any operation. Flowing back after fracturing is especially problematic due to the composition of mud, balls, and sealers that comes up. Without the proper equipment, manifolds and other surface equipment can quickly clog resulting in costly down time. To eliminate these problems, STS offers several catchers that can trap frac balls and ball sealers with outer diameters up to 3-3/4. Handling working pressures from 5,000 to 20,000 PSI, these durable apparatuses significantly reduce flow-back disruptions after fracture. FSFC-4
13 Blowout Preventers Product Description: STS Frac Stack and Flow Control Division provides a complete line of blowout preventers (BOP s) and supplemental equipment for work-over, coil tubing, and snubbing applications. Depending upon requested specifications, these high pressure safety valves vary in sizes and working pressures up to 20,000 PSI. Our BOP inventory consists of all the major brand names in both annular and ram-types. STS stocks a full range of single and double hydraulic rams from 3-1/16 to 13-5/8, including straight bore and blinds, shear, and specialty types. From tandem booster and shear bonnets to work plates and Shaffer ram carriers, we can provide our customers a complete protection package. To maximize time efficiency in the field, we specialize in quick rig-ups with unique 5 Ram Stacks. Complete with work baskets, control panel, and surge bottle. In addition to this wide inventory, snubbing stack and coil tubing support equipment is also available for all high-pressure requirements. STS s blowout preventer are rented complete with hand-wheels, extensions, universal joints, and fitted with center bore and CSO rams. All snubbing stacks come with hoses for the safety rams and stripper rams connecting to the junction box. FSFC-5
14 STS Plug Catcher Product Specifications: 15,000 PSI Unit Working Pressure Skid Weight: 10,805 lbs. Skid Dimensions: L x 72.5 W Product Features: Designed to catch and retain chunks from drilled plugs Catch chamber has a 7 1/16 I.D. x 8 long Strainer is 4 O.D. x 5 Long 204 Slots ¼ Wide x 1 Long Unit Working Pressure 15K Ability to back flush utilizing bypass loop Ability to dump chunks Skid mounted for easy transportation and installation FSFC-6a
15 STS Plug Catcher PHOTOS: FSFC-6b
16 2 Max Orifice Hydraulic Choke Product Description: Designed for coil tubing, drilling, flow-back, snubbing, and blowout applications, STS s Hydraulically-operated positive-sealing chokes are available individually, combined with panels, or integrated in manifolds. By allowing the pressure parameters to be changed to meet production requirements, these single and dual chokes are capable of handling working pressures of 5,000 to 20,000 psi. Also available in positive and adjustable styles, STS s chokes are manufactured with orifice sizes ranging from 1-1/2 to 3 and inlet/outlet flanges from 1-13/16 to 4-1/16. The choke gate and seat are constructed of high quality tungsten carbide for maximum wear resistance. STS has combined the erosion resistant concentric flow pattern found to be the least turbulent in downstream flow with a positive sealing gate and seat. For safe, reliable well-control, STS s choke control system includes one or two hydraulically operated chokes, two pressure transmitters, two pump stroke counter lines, and a control panel. The control panel contains all gauges and the pump stroke counter. All hoses to connect the system are provided and are steel-reinforced for greater safety and reliability. Digital Choke Position Indicators, available on STS s chokes, accurately display the exact choke position in percentages. This is extremely important when drilling under balanced pressure, circulating out a kick, or flowing back after fracture. Due to an independent-analog output with an industry-standard interface, these panels are capable of transmitting valuable data to other vendors well site information systems. Product Features: High operating force: Large hydraulic piston has more than 10,000 lbs of force to control the choke Large body cavity: Buffer cavity gives a more uniform flow through the gate and seat Positive Seal: gate and seat seals inside the seat to give a positive shut off. Gate and seat are reversible to give these parts extended life Abrasion Resistant Wear Sleeve: Downstream wear sleeve provides protection from erosion on the most turbulent area of flow FSFC-7a
17 2 Max Orifice Hydraulic Choke Product Dimensions: 10,000 PSI Working Pressure Body Approximate Weight = 800 lbs. Size A & B X Y C Z 1-13/16 10M 14-5/16" 19-3/16" 30-3/4" Y /2" 2-1/16 10M 14-5/16" 15" 30-3/4" Y /2" 2-9/16 10M 14-5/16" 15" 30-3/4" Y /2" 3-1/16 10M 14-5/16" 15" 30-3/4" Y /2" 4-1/16 10M 16-5/16" 17-1/2" 30-3/4" Y /2" 15,000 PSI Working Pressure Body Approximate Weight = 900 lbs. Size A & B X Y C Z 1-13/16 15M 15-3/4" 20" 34-1/2" Y /2" 2-1/16 15M 15-3/4" 20" 34-1/2" Y /2" 2-9/16 15M 15-3/4" 20" 34-1/2" Y /2" 3-1/16 15M 15-3/4" 20" 34-1/2" Y /2" 20,000 PSI Working Pressure Body Approximate Weight = 1,500 lbs. Size A & B X Y C Z 1-13/16 20M 19-1/8" 23" 34-1/2" Y /4" 2-1/16 20M 19-1/8" 23" 34-1/2" Y /4" 3-1/16 20M 19-1/8" 23" 34-1/2" Y /4" FSFC-7b
18 Chunk Choke - Model C Product Description: Responding to requests by customers to help reduce damage to downstream equipment caused by solids, STS has added an additional outlet and modified our current proven design to incorporate a solids removal feature. Affectionately called the Chunk Choke due to its rock catching application, the Model C Choke features a 2 maximum orifice and can handle working pressures of 10,000 and 15,000 PSI. Large solids are removed from the flow stream due to differential areas between the inlet and choke cavity. This is the principle behind our original choke design to stabilize flow in the body prior to passing over the gate and seat. Product Features: Patented Design exclusive to STS Manufactured to API Specifications Hydraulically operated Available in 10,000 and 15,000 PSI working pressure Available in right or left hand configurations to fit existing manifolds Removable inlet and outlet spools FSFC-8
19 SPS Material H2S Compatibility SPS Material H2S Compatibility Valves, Chokes, Sand Knockouts Engineering Report No. ER B Rev. B Date: Page 1 of 1 The table below describes part, material types used and hardness of components in Specialty (SPS) frac and manifold valves and their H2S tolerance according to requirements of NACE MR H2S Concentration fraction x well pressure = H2S Partial pressure Ex. 900 ppm/1,000,000 ppm x 8300 psi = 7.47 psi PP x 8300 psi = 7.47 psi partial pressure H2S H2S Concentration Well Pressure H2S Partial Pressure 900 ppm 8300 psi 7.47 psi PART MATERIAL HARDNESS H2S LEVEL ALLOWED NOTE SPS 7 1/16 15M VALVE BODY BONNET GATE BODY BUSHING RETAINER PLATE STEM 4130 NQT INCONEL 718 BHN235 MAX 40 HRC MAX NO LIMIT NO 250F NACE MR0175 PART 2 A2 NACE MR0175 PART 3 A32 SEAT STELLITE 6 45 HRC MAX NO LIMIT NACE MR0175 PART 3 A38 BONNET GASKET SS HRB MAX NO LIMIT NACE MR0175 PART 3 A7 GATE GUIDE SS304 NA NO LIMIT NACE MR0175 PART 3 A7 SPS 2 1/16 15M VALVE MATERIAL HARDNESS H2S LEVEL ALLOWED NOTE BODY BONNET GATE BODY BUSHING RETAINER PLATE STEM 4130 NQT INCONEL 718 BHN235 MAX 40 HRC MAX NO LIMIT NO 250F NACE MR0175 PART 2 A2 NACE MR0175 PART 3 A27 SEAT STELLITE 6 45 HRC MAX NO LIMIT NACE MR0175 PART 3 A38 BONNET GASKET SS HRB MAX NO LIMIT NACE MR0175 PART 3 A7 GATE GUIDE SS304 NA NO LIMIT NACE MR0175 PART 3 A7 SAND KNOCKOUT 4130 NQT BHN235 MAX NO LIMIT NACE MR0175 PART 2 A2 SPS CHOKE STEM MP-35N NO LIMIT NOT COVERED TRIM CARBIDE NO LIMIT NOT COVERED FSFC-9
20 GRAVEL PACK Frac Heads Test Heads Connections Application WP TP Features Tensile Dual 4" 1502 inlets 8" STUB ACME FP/GP/CT/SL/W L 15,000 PSI 22,000 PSI Hyd/Man/Flange Access Union 1 million Dual 4" 1502 inlets 8" STUB ACME FP/GP/CT/SL/W L 15,000 PSI 22,000 PSI Hyd/Man/Flange Access Union 1 m illion Dual 4" 1502 inlets 8" STUB ACME FP/GP/CT/SL/W L 15,000 PSI 22,000 PSI Hyd/Man/Flange Access Union 1 million Dual 4" 1502 inlets XTM 69 FP/GP/CT/SL/W L 15,000 PSI 22,000 PSI Hyd/Man/Flange Access Union 1.5 m illion Dual 4" 1502 inlets XTM 69 FP/GP/CT/SL/W L 15,000 PSI 22,000 PSI Hyd/Man/Flange Access Union 1.5 m illion Dual 4" 1502 inlets XTM 69 FP/GP/CT/SL/W L 15,000 PSI 22,000 PSI Hyd/Man/Flange Access Union 1.5 million Dual 4" 1502 inlets XTM 69 FP/GP/CT/SL/W L 15,000 PSI 22,000 PSI Hyd/Man/Flange Access Union 1.5 million Test Heads Connections Application WP TP Features Dual Unibody 3-1/2 IF TCP/DST 10,000 PSI 15,000 PSI Hyd/Man Dual Unibody 4-1/2 IF TCP/DST 15,000 PSI 22,000 PSI Hyd/Man Dual Unibody 6-5/8 FH TCP/DST 15,000 PSI 22,000 PSI Hyd/Man Flowcontrol Manifolds Product Description Size Application WP TP Foot Print Features Dual Choke Manifold 2" x 2" CT/PS/TCP/SL 15,000 PSI 22,000 PSI 3'0" x 4'5" x 3'5" Hyd/Man Squeeze Manifold 2" x 2" CT/PS/TCP/GP 15,000 PSI 22,000 PSI 3'0" x 3'0" x 2'8" Hyd/Man 3" x 2" CT/TCP/GP 15,000 PSI 22,000 PSI 3'0" x 4'0" x 3'5" Hyd/Man 3" x 2" TCP/FP/GP 15,000 PSI 22,000 PSI 5'0" x 5'0" x 4'5" Hyd/Integrated Choke 4" x 2" FP/GP 15,000 PSI 22,000 PSI 5'0" x 5'0" x 4'5" Hyd/Man/Integrated Choke 4" x 3" FP/GP 15,000 PSI 22,000 PSI 5'0" x 8'0" x 6'0" Hyd/Man/Integrated Choke Manual and Hydraulic Chokes available for all sizes and applications. Choke packages available with automatic choke design. X-Overs available to match your workstring. Flange Access Union Application Index * CT- Coil tubing * PS - Prodution Services * SL - Slick Line * WL - Wireline * TCP - Tubing Conveyed Perforating * FP - Frac Pack * GP - Gravel Pack * DST - Drill Stem Test XTM 69 Frac Head Test Head FSFC-10a
21 Complete Surface Services Drilling Choke Services - When drilling under balanced pressure, circulating out a kick, or flowing back after fracture, the positioning of chokes is critical to the flow management of the well. STS provides experienced personnel that will nipple up, test, and monitor these hydraulic chokes so that customer demands are not only met, but exceeded. Flow-Back Services - To handle the dangerous pressures of deep wells, STS can customize manifolds to any specification to handle working pressures up to 20,000 PSI. Our experienced service technicians will safely operate these manifolds and protect the mechanical integrity of other downstream components. Sand Removal Services - In addition to other sand separating equipment, STS manufactures a patented solids removal system that can handle the direct pressure from the well. Our qualified team will assist in cleaning out the debris that would otherwise create havoc on manifolds and well testing equipment. Well-Control Services - To assist in high profile well-control applications, STS can engineer BOP stacks with a variety of specialty rams that can be used for coil tubing of snubbing. From rig up to rig down, our technicians can support this high-pressure equipment and monitor the safety of the well-site. Well-Testing Services - The working knowledge and field experience of well-test operators is critical to the productivity of the flow-back operation. To complement its specialized well-testing equipment, STS hires and trains qualified technicians who can ensure the accurate reading of well data. FSFC-10b
FRAC STACKS stingercanada.com
FRAC STACKS stingercanada.com Grande Prairie 11303 96 Avenue Grande Prairie, AB T8V 5M3 780-513-3696 Calgary 420-510 5th Street SW Calgary, AB T2P 3S2 403-340-0716 Red Deer 334-28042 Hwy 11 Red Deer County,
More informationCOMPREHENSIVE OVERVIEW
COMPREHENSIVE OVERVIEW stingercanada.com 3 About Stinger 5 Ball Launchers 10 Frac Stacks 17 Buffalo Heads 18 Isolation Tools Grande Prairie 11303 96 Avenue Grande Prairie, AB T8V 5M3 780-513-3696 Calgary
More informationCHOKES API 6A & 16C Extreme Service/Drilling Chokes
CHOKES API 6A & 16C Extreme Service/Drilling Chokes Robust Reliable Proven The Standard in Non-Standard Valve Production www.uscortec.com CORTEC Models CX3 and CXE-II Drilling/Extreme Service Chokes CORTEC
More informationActuators & Surface Safety Valves
Global Energy Market Solutions HYDRAULIC / PNEUMATIC Actuators & Surface Safety Valves Including: Accessories & Alternative Configurations 2017 Omni Valve Company, LLC, BRO-ACT Rev: 1.2 ENGINEERED FOR
More informationMAGNUM GATE VALVES. Invention, Unique Design & Extraordinary Craftsmanship. WORLDWIDE OILFIELD MACHINE Est. 1980
TM MAGNUM GATE VALVES www.womusa.com Invention, Unique Design & Extraordinary Craftsmanship WORLDWIDE OILFIELD MACHINE Est. 980 Table of Contents Patented Dual-Seal Technology Magnum Gate Valve 2 Magnum
More informationOilman Group API 6A PRODUCTS OILMAN GROUP LTD. Shanghai Houston
API 6A PRODUCTS OILMAN GROUP LTD 1 BOMCO Guanghan Drilling & Production Equipment Factory is a subsidiary of CNPC and provides the best API 6A & 16A products to esteemed customers all over the world. 2
More informationTable of Contents. Choke Principle...4
Table of Contents Choke Principle...4 Positive and Adjustable Choke Features and Benefits of Positive and Adjustable Choke...5 Avialable Sizes and Pressure Ratings... Positive Choke...6 Adjustable Choke...7
More informationAPI 6A Gate Valves. an ARRAY Products Group company
API 6A Gate Valves valves for wellhead, manifold, distribution and fracture applications an ARRAY Products Group company TABLE OF CONTENTS Valve Trim Chart... 2 2,000 5,000 PSI Expanding or Slab Gate
More informationFast, Effective Blowout Protection
Dual or Single Ram Hydraulic BOPs Fast, Effective Blowout Protection MODEL DRH - DUAL RAM HYDRAULIC BOP Guide Rib Pipe Centering Guide Ram Rubber Pipe Ram Block Door Cylinder Locking Shaft Lip-Type Piston
More informationBoss Oilwell offers a complete line of API 16A BOPs, API 16C drilling manifold The ultimate solution for onshore & offshore BOPs
Boss Oilwell offers a complete line of API 16A BOPs, API 16C drilling manifold. -------The ultimate solution for onshore & offshore BOPs------- Boss Oilwell Products & Manufacturing INC(BOPM) specializes
More informationExpanding & Slab Gate Valves
Global Energy Market Solutions CAST / FORGED BODY Expanding & Slab Gate Valves For oil and natural gas wellhead, flowline, manifold, fracture or other critical service applications requiring operating
More informationSUNNDA CORPORATION. Pressure Control Equipment. Boost Your Bottom Line! Sunnda Corporation
SUNNDA CORPORATION Boost Your Bottom Line! Pressure Control Equipment Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com
More informationMulti Orifice Nozzle. Valve (MON) R Series Control Valves R2 R3 R4 R6 R8
Multi Orifice Nozzle (MON) Valve R Series Control Valves R2 R3 R4 R6 R8 R Series Control Valves www.taylorvalve.com The applied principle of Hydrodynamic Energy Conversion Protective Cage and Seat Assembly
More informationLexington Valve Parts
Lexington Valve Parts Chokes 2012 Catalog sales@lexingtonvalveparts.com Phone: 832-507-9701 1 TABLE OF CONTENTS Choke Selection Information 3 Positive and Adjustable Chokes 4 How to Order 5 Positive/Adjustable
More informationTL BOP. TL Custom Features:
TL BOP The Cameron TL BOP product line is the result of an evolution of Cameron s successful U, UII and T BOPs combined with custom features based on each customer s specific requirements. All TL BOPs
More informationCONTROL BALL VALVES LOW NOISE HIGH CAPACITY ROTARY CONTROL VALVE CBV-8600
CONTROL BALL VALVES LOW NOISE HIGH CAPACITY ROTARY CONTROL VALVE CBV-8600 The CBV-8600 design is the solution to applications where increased capacity and large control range is needed, and where noise,
More informationVALVES API 6A Compact Ball Valves
VALVES API 6A Compact Ball Valves Space and Weight Saving Zero Leakage and Superior Performance The Standard in Non-Standard Valve Production www.uscortec.com Compact Ball Valves CORTEC Compact Ball Valves
More informationThrough Conduit Gate Valves Slab & Expanding
Through Conduit Gate Valves Slab & Expanding Through Conduit Slab Gate valve Slab Gate Valves are manufactured with a full bore port, rising stem OS&Y and with floating seats and gate, pressure energized,
More informationT BOP. prep. TC Cooper Cameron, Cameron Division
T BOP The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on
More informationBLOWOUT PREVENTERS. Invention Unique Design & Extraordinary Craftsmanship
BLOWOUT PREVENTERS TM Invention Unique Design & Extraordinary Craftsmanship 1 Table of Contents WOM s BOP Stack 4 WU BOP Major Features 6 WU BOP Specifications 7 WU BOP Dimensional Data (Single) 8 WU
More informationNEECO PRODUCT CATALOGUE (FLN/FLSN)
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY: The copy, reproduction, distribution, publication, display, modification, creation of derivative works, transmition, of any content on this catalog
More informationDrilling & Down-hole Completion Tools
HYDRAULIC SET PRODUCTION PACKER MODEL: WC-HP-1 & WC-HPL-1[Large Bore] PRODUCT No.: WC-20101 & WC-20112 HP-1 is an industry standard, fully hydrostatic, hydraulic set and shear release single string retrievable
More informationLined Valves for High-corrosion and Heavy Capacity. Electronic Data Testing Centre For High Pressure Oil Gas Seal 15000PSI XMAS TREE UP DOWN TOP
Lined Valves for High-corrosion and Heavy Capacity 15000PSI XMAS TREE Electronic Data Testing Centre For High Pressure Oil Gas Seal MSP/DRILEX (China) Inc. INTRODUCTION WB Ball Valves ZN Choke Valves (Needle
More informationNARVIK-YARWAY. Heavy Duty A.T. - Temp Desuperheater Model: 18/54 and 28/64
NARVIK-YARWAY Narvik-Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp &
More informationYarway Narvik Desuperheater Model 18/54 and 28/64 Heavy Duty
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide of models, sizes and materials to satisfy the specifications of the power, pulp and paper industries along with
More informationWellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationISOLATION/UNIVERSAL TOOLS
ISOLATION/UNIVERSAL TOOLS stingercanada.com Grande Prairie 11303 96 Avenue Grande Prairie, AB T8V 5M3 780-513-3696 Calgary 420-510 5th Street SW Calgary, AB T2P 3S2 403-340-0716 Red Deer 334-28042 Hwy
More informationThru-Tubing. Motors and standard tools
Thru-Tubing Motors and standard tools Thru-Tubing Reliable. Innovative. Premium. We are proud of our products and their contribution to the downhole drilling and thru-tubing industries. Research Innovate
More informationD and DL Annular Blowout Preventers
D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force
More informationCompletion Tools Catalog
Completion Tools Catalog www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. TABLE OF CONTENTS P/N Description Page P/N Description
More informationBULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
More informationCONTROL CHOKE SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 RB SERIES CONTROL CHOKE Unique. Precise. Quality. Reliable. RB SERIES CONTROL VALVES FEATURES Benefits The RB Series Control Valve features several unique design characteristics that minimize wear
More informationSurface CIMV, Low Flow, HTV, Manual
Industries 5000 psi Operations and Maintenance Manual DOC-03715 Rev A Pioneering an Industry TABLE OF CONTENTS About SkoFlo... 2 General Information... 2 Hydraulic Ratings... 3 Storage... 3 Installation...
More informationContents. Dimensions and weights
G4N Gate Valves Through-conduit, double block-and-bleed slab gate valves with fully protected seat faces for long-lasting, drop-tight shutoff in liquid pipelines Contents General information 3 Standard
More informationCasing Scraper. Service Equipment. Features
Casing Scraper The Casing Scraper is a spring type, mechanical casing scraper, featuring a large by-pass area between the blades to allow circulation of debris. The body is constructed of the highest quality
More informationMODEL HX. Fail Safe Hydraulic Actuator FEATURES INTRO AVAILABLE SIZES. Hydraulic Actuation
MODEL HX Fail Safe Hydraulic Actuator FEATURES Flexibility Model HX actuators can be adapted to operate valves from any manufacturer (interface information is required) and can be delivered with alternate
More informationCameron International Corporation
Cameron International Corporation 2 Cameron International Corporation About this Catalog The purpose of this catalog is to serve as a quick reference for our customers. However, many of Cameron s products
More informationC BOP. TC Cooper Cameron, Cameron Division
C BOP The Cameron C BOP was designed as an emergency safety head for snubbing coiled tubing workover applications. The main function of the C BOP is to shear whatever is in the hole - from braided cable
More informationN-Line Valves. Severe Service Control Chokes
Severe Service Control Chokes Introduction continues to provide the highest levels of quality and value to oil and gas producers throughout the world. We manufacture severe service control chokes, engineered
More informationTCI DUAL QUARTER ANCHOR CATCHER (TDQAC)
TCI DUAL QUARTER ANCHOR CATCHER (TDQAC) The TQDA is a rugged anchor-catcher that operates with minimum (less than a 1/4 turn) tubing string rotation to set or release. The no torque option resists right
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationVALVE AND CONTROL SYSTEM DTP CHOKE VALVE. Discrete Tortuous Path. Solution FOR SEVERE CHOKE APPLICATIONS
VALVE AND CONTROL SYSTEM DTP CHOKE VALVE Discrete Tortuous Path Solution FOR SEVERE CHOKE APPLICATIONS Solution FOR SEVERE CHOKE APPLICATIONS DTP DISCRETE TORTUOUS PATH CHOKE VALVES are designed to provide
More information660 Tapping Machine. Features
660 Tapping Machine Sizes: 3- to12-inch Model 660C Bulletin No: 1000.005.06 Version: 07.2015 Cross Indexing No: n/a Supersedes: 1000.005.05 (06.2015) Model 660C Tapping Machines can be either air or hydraulically
More informationSlab & Double Expanding Gate Valves
Slab & Double Expanding Gate Valves Double Expanding Characteristics The main feature of a double expanding gate valve is the 2 pieces obturator that guarantees a simultaneous mechanical seal both in the
More informationTBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument
More informationPhone: /
OIL FIELD EQUIPMENT & SUPPLIES: Market served include oil industry exploration, drilling, production, refining and completion of water well and trenches technology drilling, mining, power generation utilities
More informationJordan Control Valve Series
Jordan Control Valve Series Control Valves A control valve is used to manipulate flowing fluids like, gas, water, steam or process solutions. It compensates for changes in flow or pressure and regulates
More information760 Tapping Machine. Features. The basic machine includes: Lower-in crank Measuring rod Retainer rod pusher Ring gasket
760 Tapping Machine Sizes: 3- to 16-inch Model 760C Bulletin No: 1000.006.08 Version: 07.2015 Cross Indexing No: n/a Supersedes: 1000.006.07 (06.2015) Model 760C Tapping Machines can be either air or hydraulically
More informationYARWAY NARVIK STANDARD DUTY A.T.-TEMP DESUPERHEATER MODEL 38/48
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp and paper industry and
More informationMud Pump (Emsco Type) Diesel Engine
Houston: +1 713-893 - 5018 Beijing: +86 10 82898786 E-mail: info@cppipe.com Website: www.cppipe.com www.cppipe.cn CP Pipe & Equipment Corporation (CP) is a major US supplier of tubular products, petroleum
More informationM&J Valve Product Overview
M&J Valve Product Overview M&J Valve was founded in 1962 by Marvin Grove and has been a leader in the pipeline valve industry since its inception. Now part of SPX FLOW, M&J Valve meets or exceeds the quality
More informationIntervention Barriers
Intervention Barriers A barrier is defined as a means of containing wellbore pressure and fluids. Two effective barriers are required for most intervention operations. Consider when barriers are effective
More informationDelivering innovation through engineering
Delivering innovation through engineering +44 1224 727480 Completions & Work-over Operations Bore Selector gives access to either the main production bore or annulus in a traditional vertical xmas tree,
More informationAbout Us Certificate of Registration ISO 9001:2000 TSI Flow Products, a Houston, Texas based business, began as a machine shop providing
Frac & Flowback About Us TSI Flow Products, a Houston, Texas based business, began as a machine shop providing high pressure components to the major suppliers of API 6A gate valves around the globe. This
More informationThe Well Commander Mitigate drilling hazards with the industry s most versatile drilling valve. Todd Gooding Business Development Manager
The Well Commander Mitigate drilling hazards with the industry s most versatile drilling valve Todd Gooding Business Development Manager WELL COMMANDER A COMPLETE redesign of the ball-activated Centurion
More informationMODEL DX Pneumatic Diaphragm Actuator
MODEL DX Pneumatic Diaphragm Actuator FEATURES Flexibility Model DX actuators can be adapted to operate valves from any manufacturer (interface information is required) and can be assembled in single or
More informationCrown Actuated Valves & Controls
Protecting Your Personnel, Facilities, Environment and Natural Resources Crown Self-Contained Hydraulic Valve Actuation System Stream-Flo s Crown self-contained hydraulic valve actuation system is used
More informationYARWAY HANCOCK Y-PATTERN FORGED STEEL GLOBE STOP VALVES SERIES 4000
Direct contact and metal-to-metal seating make this Y-pattern globe stop valve ideal for most shut-off applications. FEATURES All valves feature integral Stellite hardfacing on both body and disc seating
More informationArmstrong Double Duty 6 Steam Trap/Pump Combination Installation and Maintenance
Armstrong Double Duty 6 Steam Trap/Pump Combination Installation and Maintenance 119 Overview Warning: This bulletin should be used by experienced personnel as a guide to the installation and maintenance
More informationService Tools Catalog
Service Tools Catalog www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. TABLE OF CONTENTS P/N Product Description Page Type P
More informationINSTALLATION/OPERATION/MAINTENANCE INSTRUCTIONS FOR ARCHON MODELS WD2010L, WD2010, WD2010H WASHDOWN STATIONS. ARCHON Industries, Inc.
ARCHON Industries, Inc. Washdown Stations Models WD2010L, WD2010, WD2010H Installation / Operation / Maintenance Instructions 1 This manual has been prepared as an aid and guide for personnel involved
More informationValtek Tek-Check Control Valves Valtek Tek-Check
Valtek Tek-Check Control Valves Non-Slam Piston Type Easy disassembly: Removal of bolting, bonnet flange and bonnet provides easy access to piston Interchangeability: Single body used for Class 50, 300
More informationStandard Duty A.T.S.A. - Temp Desuperheater Model 24 / 34
Narvik-Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp & paper industry
More informationPRESSURE REDUCING AND DESUPERHEATING STATIONS SERIES
PRESSURE REDUCING AND DESUPERHEATING STATIONS 1-5700 SERIES - 2 - I.P. to condenser bypass valve 1-5765 - Inlet: DN 30 ANSI 900 BW - Outlet: DN 60 ANSI 300 BW - Port : 443 mm Body material: SA182 F91 /
More informationDirect contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.
Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI. Features Two inch and smaller valves are available with threaded or socket weld ends as
More informationAnderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 5100 Modulating Safety Relief Valve Anderson Greenwood has developed the revolutionary Series 5100 specifically to serve Economizer applications requiring pressure relief under
More informationMultiple Orifice Valve Chokes Precision flow control in a range of applications around the world
Multiple Orifice Valve Chokes Precision flow control in a range of applications around the world Contents MOV chokes................................................................................2 Multiple
More informationSeries 774 Automatic Skid Package
Fluid Engineering 1432 Walnut St Erie, PA 16502 USA PH 814.453.5014 FAX 814.452.6573 www.fluideng.com sales @fluideng.com CONTINUOUS FLOW The Fluid Engineering 774 Strainer Package is designed to handle
More informationT-2 On-Off Tool. Available with all common wireline profiles, the stinger works with industrystandard blanking plugs, standing valves and regulators.
T-2 On-Off Tool Classic Oilfield s T-2 On-Off Tool enables the tubing string to be disconnected above a packer for zonal isolation, tubing retrieval, and temporary zone abandonment. The tool contains an
More informationGROVE B4, B5 and B7 Side-entry Ball Valves
GROVE B4, B5 and B7 Side-entry Ball Valves Table of Contents GROVE B4, B5 and B7 SIDE-ENTRY BALL VALVES Features and Benefits Applications...1 GROVE B4 Design Features...2 Materials Specifications...4
More informationPlastics & Packaging ONE STOP SHOPPING. Canada USA
T H E C O N V E Y I N G P R O D U C T S P E O P L E Plastics & Packaging C O N V E Y I N G P R O D U C T S G U I D E Canada 1-800-263-1942 USA 1-800-263-7782 sales@lorenz.ca www.lorenzproducts.com ISO
More informationSUNNDA CORPORATION. Wellheads, Production & Frac Equipment. Boost Your Bottom Line! Sunnda Corporation
SUNNDA CORPORATION Boost Your Bottom Line! Wellheads, Production & Frac Equipment Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com
More information760 Tapping Machine. Features
760 Tapping Machine Sizes: 3- to 16-inch Model 760C Bulletin No: 1000.006.11 Version: 12.2017 Cross Indexing No: n/a Supersedes: 1000.00610 (06.2015) Model 760C Tapping Machines can be either air or hydraulically
More informationThe Rollercone II is capable of increasing output up to 35%. Rollercone II
ElJay Increased output from advanced engineering The Cedarapids/ElJay Rollercone II sets the standard for second generation cone crushers. The features advanced crushing chamber technology that yields
More informationValtek Tek-Check. Check Valves
Valtek Tek-Check Check Valves Non-Slam Piston Type Easy disassembly: Removal of bolting, bonnet flange and bonnet provides easy access to piston Interchangeability: Single body used for Class 150, 300
More informationNEECO INDUSTRIES INC. INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY
INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY INTRODUCTION The NF-700 type gate valves provided by Neeco Industries are full-bore through conduit non-rising stem manually (w/ball screw) operated valves.
More informationHYDRAULIC WORKOVER SERVICES
HYDRAULIC WORKOVER SERVICES Technology at work for you. Cudd Energy Services (CES) offers a diversified portfolio of solutions for today s well challenges. From a simple completion job to a complex well
More informationVALVEWORKS USA OPERATION AND SERVICE MANUAL FOR MODEL FC GATE VALVES MODEL FC PSI W.P FLOATING SLAB GATE VALVES
OPERATION AND SERVICE MANUAL FOR MODEL FC GATE VALVES MODEL FC 3000-15000 PSI W.P FLOATING SLAB GATE VALVES INTRODUCTION In appreciation to our customer for purchasing our product, we have prepared this
More informationPatented Dual-Seal Technology...4
Table of Contents Patented Dual-Seal Technology...4 Magnum Gate Valve Magnum Gate Valve Unique Feature...5 Magnum Gate Valve Components...6 Magnum Gate Valve Specifications...7 Gate Valve Standard Trims...8
More informationAutomatic Recirculation Valves PUMPENSCHUTZVENTILE
Automatic Recirculation Valves PUMPENSCHUTZVENTILE Automatic Recirculation Valves An automatic recirculation valve (ARV) is a multifunctional valve whose primary purpose is to ensure that a pre-determined
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationThe Ultimate Solution in Flow Control. Manufactured By:
The Ultimate Solution in Flow Control Manufactured By: The Control head The Control Head is the central processing unit of the valve as it contains the only moving parts for general operation. The high
More informationChoke & Kill Manifolds
Manifold Systems Drilling, Production,Testing TM Invention Unique Design & Extraordinary Craftsmanship Choke & Kill Manifolds WOM specializes in the manufacture of manifolds for a complete range of onshore
More informationWLTC Retrievable Bridge Plug
service Tools WLTC Retrievable Bridge Plug The WLTC Retrievable Bridge Plug is designed to perform all tasks normally required of a tubing run packer-type bridge plug and can be quickly converted to run
More informationXFPES provides a whole range of after sales services including installation, maintenance, remanufacturing, supply and Management of spare parts.
About us XFPES Provides a complete range of equipment, engineered, designed and manufactured for the oil & gas industry including wellheads, X-mas trees, BOP, choke, manifolds, union, high-pressure movable
More informationVALVOLE. Choke Valves Gate Valves WellHead Control Panels Control Systems Oil & Gas Upstream Equipment CELEBRATING
VALVOLE Choke Valves Gate Valves WellHead Control Panels Control Systems Oil & Gas Upstream Equipment CELEBRATING Your best solution for Oil & Gas Upstream Equipment Quam is a CUSTOMER-ORIENTED company
More informationA Long Experience in Energy Equipment and one Goal: The Customer s Satisfaction. CHOKE. Control Valves
A Long Experience in Energy Equipment and one Goal: The Customer s Satisfaction. CHOKE Control Valves ENERGY NEEDS CONTROL Choke valves are required to handle some of the most demanding operating conditions:
More informationModel SCV (Angle Body)
Model SV (ngle ody) Providing extended service life, precise flow control, ease of maintenance and operational reliability in the most challenging applications Features The standardized forged body and
More informationAPI 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG
1 API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG Sevilla No. 211 Fracc. Praderas de Elite Reynosa, Tamps Tel: (899)-263-49-82 www.marvic-int.com 2 Table
More informationTRUNNION MOUNTED METAL SEATED BALL VALVES
TRUNNION MOUNTED METAL SEATED BALL VALVES HIGH PERFORMANCE BALL VALVES FOR SEVERE SERVICES PROCESS VALVES STANDARD FEATURES FOR SIDE ENTRY & BOTTOM ENTRY DESIGN 1. Trunnion Mounted The ball is trunnion
More informationAPI6A Valves products CATALOG
API6A Valves products CATALOG INDEX 1. DFC TYPE GATE VALVE 2. DF TYPE PARRALLEL GATE VALVE 3. DWKM TYPE EXPANDING GATE VALVE 4. MUD GATE VALVE 5. CAGE CHOKE VALVE 6. ORIFICE CHOKE VALVE 7. POSITIVE CHOKE
More informationDelayed Coking. Process Overview
Process Overview Page 1 of 6 History of the Delayed Coking Process Petroleum coke was first made by the pioneer oil refineries in Northwestern Pennsylvania in the 1860 s. Primitive distillation techniques
More informationWILLIS. Multiple Orifice Valve (MOV) chokes
WILLIS Multiple Orifice Valve (MOV) chokes Content WILLIS MOV chokes......................................................................2 Multiple orifice valves multiple solutions........................................4
More informationOil and Gas Products Pressures to 30,000 psi
Oil and Gas Products MAXIMATOR has been designing and manufacturing specialty products to the high pressure market for over thirty years and has a worldwide reputation for quality and reliability. Oil
More informationPetroPi Industries Ltd. Wellhead
PetroPi Industries Ltd. Wellhead Table of Content Company Overview... 3 Company Strength... 3 Wellhead Engineering Design... 4 Conventional Sweet Flowing Wellhead... 4 Conventional Sour Flowing Wellhead...
More informationFull Flow Reverse Circulation Junk Baskets. Manual B320
Full Flow Reverse Circulation Junk Baskets Manual B320 CONTENTS Logan Full Flow Reverse Circulation Junk Basket Overview... 2 Uses... 2 Construction... 2 Tool Illustration... 3 Operation... 4 Recovering
More informationValveworks USA Operation and Maintenance Booklet Model FC
Operation and Maintenance Booklet Model FC MODEL FC 3000, 5000, 10000, & 15000 W.P. FLOATING SLAB GATE VALVES 1 13/16-2 1/16-2 9/16-3 1/16-4 1/16 BOOKLET APPROVED BY: INTRODUCTION In appreciation to you
More informationYarway Narvik Model 37 and 47 Cryogenic injector
Cryogenic injector for LNG applications Features Fabricated construction High quality stuffing box with PTFE Chevron rings Variable nozzle type Wide range of K v (C v ) available Special nozzle combinations
More informationBS 5351 ASME CLASS: SIZES: mm ( 1 /2 12 )
BS 5351 ASME CLASS: 150 300 SIZES: 15 300mm ( 1 /2 12 ) PROFILE Velan is the world's leading manufacturer of steel gate, globe, check, ball, knife and butterfly valves, 8 1500 mm ( 1 4 60 ), ASME Classes
More information