Model P001 Piston Flow Meter (Analog) to 200 cc/min

Transcription

1 recision flow solutions an ISO 900:008 certified company Model 00 iston Flow Meter (nalog) to 00 cc/min SECIFICTIOS Flow Range ccuracy ( c) Maximum Operating ressure Displacement Weight Recommended Filtration ort Size(s) Fluids Dimensions to 00 cc/min dependent on viscosity ± 0.% of reading over a 00: range, or ± mv (or 4μ), whichever is greater 500 bar (750 psi) 0. cc/rev 0.9 kg 5 micron /4" or 6mm tube fitting Most non aqueous, organic liquids Ø 57mm x 90mm tall (Ø. x.5 tall) MTERILS OF COSTRUCTIO Body Case hardened stainless steel, type 6 istons Case hardened stainless steel, type 6 Crankshaft Stainless steel, type 6 Bearings O Rings LOG TRSMITTER Output Signal ower Supply Requirements Hybrid ceramic balls with enhanced corrosion r esistant stainless steel Viton - standard, erfluoroelastomer - option ny range of ± 0V or ± 0m Linearized and damped with anti-dither protection Two Models: 90 m, 45 m mbient Operational Range -40 C to 80 C, Single piece Two piece to 0 C Metered Liquid Temp Range (based on 0 ambient) Compliance -40 C to 90 C, Standard model -40 C to 55 C, Two piece high temperature model -40 C to 5 C, Two piece, ultra high temperature model CE Certified, Ex-proof version available with TEX/IECEx II G Ex db IIB Tx Gb as well as UL, cul certification for Class, Division, Groups C and D, Tx 00 Standard 00_nalog Rev Two piece (ultra-high temp. model) ` 00 Ex-roof housing

2 Model 00 iston Flow Meter (nalog).96 (50mm) 4. (06mm) 4.67 (9mm) Model 00 meter with industrial Model 00 meter with Explosion roof.75 (44mm) Bottom View mounting holes /4-0C () places not to scale Top View of Explosion roof Enclosure 0.65 (7mm) maxmachinery.com Healdsburg venue Healdsburg, C T F

3 ositive Displacement Flow Meters iston Type, 750 psi (500 bar) rated Flow Meter Selections Transmitter Selections Model # HS on-standard options - Bi-directional cal BID Max flow range 0. Liters/min Liters/min ressure 750 psi (500 bar) HS B C D S Transmitter Type Output Type 4-0m output powered by 4Vdc 4-0m output powered by Vdc 0-0Volt output powered by 4Vdc 0-0Volt output powered by Vdc 5V ulse/uad powered by 5-6Vdc 5V uadrature - powered by 5-6Vdc Current Sinking, single phase Temperature rating 90 C 0ºC Ex-roof / 55 C Industrial ** 5 C - part Industrial Fluid Connection Electrical Connection SE Turck connector /4 and 6mm Tube Hazardous location * Seal Selection Viton - FKM erfluoroelastomer - FFKM 5 Signal Type ulse nalog uadrature Options one Calibration rice includes unidirectional calibration * See temp chart ** Receiver portion of part s are not rated Ex-roof, consult factory ot available for hazardous location use. (Exceeds 0 C temp. limit.)

4 an ISO 900:008 certified company Model 00 iston Flow Meter (Frequency) to 00 cc/min SECIFICTIOS Flow Range ccuracy ( c) Maximum Operating ressure Displacement Weight Recommended Filtration ort Size(s) Fluids Dimensions to 00 cc/min dependent on viscosity ± 0.% of reading over a 00: range 500 bar (750 psi) 0. cc/rev 0.9 kg 5 micron /4" or 6mm tube fitting Most non aqueous, organic liquids Ø 57mm x 90mm tall (Ø. x.5 tall) MTERILS OF COSTRUCTIO Body Case hardened stainless steel, type 6 istons Case hardened stainless steel, type 6 Crankshaft Stainless steel, type 6 Bearings Hybrid ceramic balls with enhanced corrosion resistant stainless steel O Rings Viton - standard, erfluoroelastomer - option FREUECY TRSMITTER Output Signal 5 Vdc single phase standard (typical k-factor,,000 pulses/cc) uadrature square wave optional (typical k-factor 4,000 pulses/cc) Current sinking single phase optional 5-6 0ma ower Supply Requirements mbient Operational Range -40 C to 80 C, Single piece Two piece to 0 C Metered Liquid Temp Range -40 C to 90 C, Standard model (based on 0 ambient) -40 C to 55 C, Two piece high temperature model -40 C to 5 C, Two piece, ultra high temperature model Compliance CE Certified, Ex-proof version available with TEX/IECEx II G Ex db IIB Tx Gb as well as UL, cul certification for Class, Division, Groups C and D, Tx 00 Standard 00_Frequency Rev Two piece (ultra-high temp. model) ` 00 Ex-roof housing

5 Model 00 iston Flow Meter (Frequency).96 (50mm) 4. (06mm) 4.67 (9mm) Model 00 meter with industrial Model 00 meter with Explosion roof.75 (44mm) Bottom View mounting holes /4-0C () places not to scale Top View of Explosion roof Enclosure 0.65 (7mm) maxmachinery.com Healdsburg venue Healdsburg, C T F

6 ositive Displacement Flow Meters iston Type, 750 psi (500 bar) rated Flow Meter Selections Transmitter Selections Model # HS on-standard options - Bi-directional cal BID Max flow range 0. Liters/min Liters/min ressure 750 psi (500 bar) HS B C D S Transmitter Type Output Type 4-0m output powered by 4Vdc 4-0m output powered by Vdc 0-0Volt output powered by 4Vdc 0-0Volt output powered by Vdc 5V ulse/uad powered by 5-6Vdc 5V uadrature - powered by 5-6Vdc Current Sinking, single phase Temperature rating 90 C 0ºC Ex-roof / 55 C Industrial ** 5 C - part Industrial Fluid Connection Electrical Connection SE Turck connector /4 and 6mm Tube Hazardous location * Seal Selection Viton - FKM erfluoroelastomer - FFKM 5 Signal Type ulse nalog uadrature Options one Calibration rice includes unidirectional calibration * See temp chart ** Receiver portion of part s are not rated Ex-roof, consult factory ot available for hazardous location use. (Exceeds 0 C temp. limit.)

7 CERTIFICTE OF CLIBRTIO Certificate #: 9009 Keep for your records. Customer: Sample Laboratory Location: Max Machinery, Inc Healdsburg ve Healdsburg, C Type of Device: Manufacturer: Model umber: Serial umber: Flow Meter 00HS// D500 Date of Calibration: 7/7/05 Sales Order: Sample rocedure Used: L-W-05 erformed By: TOE Calibration Fluid: Kerosene Fluid Viscosity: cps Fluid Specific Gravity: 0.86 g/ml Fluid Temp: C +/- C Output Units: ulses/cc Flow Units: cc/min ve K-Factor: 6000 Calibration otes: This document reflects the new linear calibration. The new condition was found to be in tolerance. Calibration Data Flow Rate Output Error Flow Rate Output Error cc/min ulses/cc Frequency Hz % reading cc/min ulses/cc Frequency Hz % reading % 0.00% 0.0% 0.0% -0.0% 0.07% 0.0% 0.5% Equipment Used in the Calibration: Calibration ID: 400 Description: Optical Encoder Serial umber: U49 Cal Due Date: //09 Certificate umber: Counter/Timer /6/ C pproval: Calibration Technician Craig ust uality Manager 7/7/05 Tony Elrod Lab Technician 7/7/05 This calibration was conducted using standards traceable to IST. Measurement uncertainty of the #4 test stand is +/- 0.8% of reading with a 95% confidence (k= coverage factor). Calculations are available upon request. maxmachinery.com This Certificate shall not be reproduced, except in full, without written approval by Healdsburg venue T Healdsburg, C F rint Date: 8 Jul 05 :4:7 M age of