Accessories for HAAKE MARS and HAAKE RheoStress 6000

Transcription

1 Accessories for HAAKE MARS and HAAKE RheoStress 6000

2 Table of Contents Accessories for HAAKE MARS and HAAKE RheoStress 6000 Test fluids and standard liquids Rheometer & Rheology Software Accessories for HAAKE MARS and HAAKE RheoStress 6000 Liquid temperature control unit for cone/plate measuring geometries and accessories UTCP/P Peltier temperature control unit for cone/plate measuring geometries and accessories Electrically temperature control unit for cone/plate measuring geometries and accessories Measuring geometries: plate-cone and plate-plate up to 500 C and accessories Liquid temperature controlled and electrical cylinder sensor system s and accessories Pressure sensor system D100/200 and accessories Pressure sensor system D400/300 and accessories Hastelloy pressure sensor system and accessories Sensors and accessories for electro-rheology Measuring Cell for Construction Material SHRP bitumen sensor UV curing cell Accessories for HAAKE MARS High temperature sensor system Measuring Cell for Construction Material Electro-rheology Controlled Test Chamber (CTC) and accessories RheoScope Module and accessories Accessories for HAAKE RheoStress 6000 High temperature sensor system Electro-rheology Specials (BAs)

3 2

4 Accessories for HAAKE MARS and HAAKE RheoStress 6000 Order No. Type Description Test fluids and standard liquids E E E E E E E E E BW AW BW S S S S S30000 Test fluid 100ml, EU Safety Certificate: 5mPas (20 C) Test fluid 100ml, EU Safety Certificate: 120mPas (20 C) Test fluid 100ml, EU Safety Certificate: 1900mPas(20 C) Test fluid 100ml, EU Safety Certificate: 6000mPas(20 C) Test fluid 100ml, EU Safety Certificate: 15000mPas (20 C) Test fluid 100ml, EU Safety Certificate: 40000mPas (20 C) Test fluid 500ml, EU Safety Certificate: 33mPas (20 C) Test fluid 500ml, EU Safety Certificate: 330mPas (20 C) Test fluid 500ml, EU Safety Certificate: 1300mPas (20 C) Standard liquid 100ml, DKD Certificate 100BW: 100mPas (20, 23, 25, 30, 40 and 100 C) Standard liquid 100ml, DKD Certificate 2000AW: 2000mPas (20, 23, 25, 30, 40 and 100 C) Standard liquid 100ml, DKD Certificate 10000BW: 10000mPas (20, 23, 25, 30, 40 and 100 C) Test fluid (Silicon Oil) 500ml, EU Safety Certificate: approx. 100mPas (25 C) Test fluid (Silicon Oil) 500ml, EU Safety Certificate: approx. 1000mPas (25 C) Test fluid (Silicon Oil) 500ml, EU Safety Certificate: approx. 5000mPas (25 C) Test fluid (Silicon Oil) 500ml, EU Safety Certificate: approx mPas (25 C) Test fluid (Silicon Oil) 500ml, EU Safety Certificate: approx mPas (25 C) Rheometer & Rheology Software TTS Spectra MWD Part 11 RheoAdapt TTS tool for HAAKE RheoWin 3 Spectra tool for HAAKE RheoWin 3 MWD tool for HAAKE RheoWin 3 CFR Part 11 tool for HAAKE RheoWin 3 for rheometers (models series 1, RSXXX and MARS) RheoAdaptive tool for HAAKE RheoWin 4 (for rheometer models MARS, RS6000 and RS600) Accessories for HAAKE MARS and HAAKE RheoStress XXX FU Standard filter unit for RS Exchange filter insert (fine) Exchange filter insert (activated carbon) Carat Carat Air compressor Carat (230V/50Hz) with dryer, filter unit and precision pressure controller Air compressor Carat (115V/60Hz) with dryer, filter unit and precision pressure controller Preliminary filter for compressor Carat Precision pressure controller for compressor Carat

5 Air dryer for air bearing systems Dryer pellets for compressor Carat Carat Carat Air compressor Carat (230V/50Hz) with dryer and filter unit, for continuouse operation Air compressor Carat (115V/60Hz) with dryer and filter unit, for continuouse operation Ring Ring Double wall test sample protection shield to prevent heat loss for cone/plate geometry (Dewar) Protection ring out of glass, H=23mm (2pcs.) Protection ring out of glass, H=30mm (2pcs.) Cable Adapter coupling with bore 6mm for RV/RS RS232 cable (9PIN female - 25PIN male) Sample hood against heat loss and solvent evaporation out of teflon with nitrogen-inlet (up to 240 C) Transparent sample hood against heat loss and solvent evaporation for cone/plate geometry out of polycarbonate (max. 100 C) Solvent trap made of glass for cone/plate geometry Solvent trap made of aluminium for cone/plate geometry Temperature measuring instrument (Testo), temperature sensor or req. Temperature sensor (Testo), requires temperature controller Temperature sensor (Testo), requires temperature controller , with silicon sample Holding spring for measuring plates for RSXXX (3pcs.) Ring for Peltier-temperature control unit as well as plate / cone temperature control units series Sample loading tool for all plate / cone measuring geometries with mold for diameter adaptation incl. disposable steel strips (50 pcs.) Steel strips for sample loading tool (50 pcs.) Sample trimming tool for plate / cone measuring geometries Liquid temperature control unit for cone/plate measuring geometries TEF/P Liquid controlled base plate for cone/plate geometry up to 350 C, measuring plate (MP) and circulator required Adapter for metal hose (2 pcs.) Metal armored Viton hoses (2pcs.) up to 150 C with brass connections (2 pcs req.) Quick connector adapter, angled (2 pcs. required) Hose connector without valve Measuring geometries: plate-cone and plate-plate MP60 C60/4 C60/2 C60/1 C60/0.5 PP60 Measuring plate MP60, D=60mm Cone C60/4, D=60mm, low inertia for RV/RS Cone C60/2, D=60mm, low inertia for RV/RS Cone C60/1, D=60mm, low inertia for RV/RS Cone C60/0.5, D=60mm, low inertia for RV/RS Plate PP60, D=60mm, low inertia for RV/RS MP35 C35/4 C35/2 C35/1 C35/0.5 PP35 Measuring plate MP35, D=35mm Cone C35/4, D=35mm, low inertia for RV/RS Cone C35/2, D=35mm, low inertia for RV/RS Cone C35/1, D=35mm, low inertia for RV/RS Cone C35/0.5, D=35mm, low inertia for RV/RS Plate PP35, D=35mm, low inertia for RV/RS MP20 C20/2 C20/1 C20/0.5 C20/0.3 PP20 Measuring plate MP20, D=20mm Cone C20/2, D=20mm, low inertia for RV/RS Cone C20/1, D=20mm, low inertia for RV/RS Cone C20/0.5, D=20mm, low inertia for RV/RS Cone C20/0.3, D=20mm, low inertia for RV/RS Plate PP20, D=20mm, low inertia for RV/RS 4

6 Measuring geometries: plate-plate (serrated) MP35S PP35S MP20S PP20S HPP20S Measuring plate MP35S, D=35mm, serrated Plate PP35S, D=35mm, serrated for RV/RS Measuring plate MP20S, D=20mm, serrated Plate PP20S, D=20mm, serrated for RV/RS Plate HPP20S, D=20mm, serrated, with ceramic shaft for RV/RS MP60/DC DC60/2 DC60/1 Measuring geometries: double cone Measuring plate MP60/DC Double cone DC60/2, D=60mm, low inertia with cover for RV/RS Double cone DC60/1, D=60mm, low inertia with cover for RV/RS Measuring geometries: plate-plate (disposable) PP20E Holder MP20E MP20E PP60E Holder MP60E MP60E Holder for disposable plate PP-E, with ceramic shaft for RV/RS Disposable plate (upper geometry) PP20E (100pcs.) made of aluminium for RV/RS Holder for disposable measuring plate MP20E (lower measuring geometry) Disposable measuring plate (lower measuring geometry) MP20-E (100pcs.) made of aluminium for RV/RS Holder for disposable plate PP-E, with ceramic shaft for RV/RS Disposable plate (upper geometry) PP60-E (100pcs.) made of aluminium for RV/RS Holder for disposable measuring plate MP60-E for RSXXX and MARS Disposable plate (lower geometry) MP60-E (100pcs.) made of aluminium for RV/RS UTCP/P Peltier temperature control unit UTC UTCP/P UTC-Pack Universal temperature control box UTC Peltier temperature control unit for cone/plate measuring geometry, -60 up to 200 C for RXXX and MARS (control box UTC is required) UTC Peltier-package consisting of UTC box and UTCP/P Metal armored Viton hoses (2pcs.) up to 150 C with connections made of stainless steel (2 pcs req.) Adapter (stainless steel) from R1/4' to M16x HX1P HX1P/US HX1A HX1A Heat exchanger HX1 P for Peltier temperature control unit (230V/50Hz) Heat exchanger HX1P (120V/60Hz) for Peltier temperature control unit Heat exchanger HX1 A for Peltier temperature control unit (230V/50-60Hz) Heat exchanger HX1 A for Peltier temperature control unit (115V/60Hz) Ring for Peltier-temperature control unit as well as plate / cone temperature control units series 1 UTCP/P measuring geometries: plate-cone and plate-plate MPC60 PP60 C60/4 C60/2 C60/1 C60/0.5 Measuring plate cover MPC60, D=60mm for series 1, RSXXX and MARS (Peltier) Plate PP60, D=60mm, low inertia for RV/RS Cone C60/4, D=60mm, low inertia for RV/RS Cone C60/2, D=60mm, low inertia for RV/RS Cone C60/1, D=60mm, low inertia for RV/RS Cone C60/0.5, D=60mm, low inertia for RV/RS MPC35 PP35 C35/4 C35/2 C35/1 C35/0.5 Measuring plate cover MPC35, D=35mm for series 1, RSXXX and MARS (Peltier) Plate PP35, D=35mm, low inertia for RV/RS Cone C35/4, D=35mm, low inertia for RV/RS Cone C35/2, D=35mm, low inertia for RV/RS Cone C35/1, D=35mm, low inertia for RV/RS Cone C35/0.5, D=35mm, low inertia for RV/RS

7 MPC20 PP20 C20/2 C20/1 C20/0.5 C20/0.3 Measuring plate cover MPC20, D=20mm for series 1, RSXXX and MARS (Peltier) Plate PP20, D=20mm, low inertia for RV/RS Cone C20/2, D=20mm, low inertia for RV/RS Cone C20/1, D=20mm, low inertia for RV/RS Cone C20/0.5, D=20mm, low inertia for RV/RS Cone C20/0.3, D=20mm, low inertia for RV/RS UTCP/P Measuring geometries: plate-plate (serrated) MPC60S PP60S Measuring plate cover MPC60S,D=60mm, serrated for series 1, RSXXX and MARS (Peltier) Plate PP60S, D=60mm, serrated for RV/RS MPC35S PP35S Measuring plate cover MPC35S,D=35mm, serrated for series 1, RSXXX and MARS (Peltier) Plate PP35S, D=35mm, serrated for RV/RS MPC20S PP20S HPP20S Measuring plate cover MPC20S,D=20mm, serrated for series 1, RSXXX and MARS (Peltier) Plate PP20S, D=20mm, serrated for RV/RS Plate HPP20S, D=20mm, serrated, with ceramic shaft for RV/RS UTCP/P Measuring geometries: double cone MPC/DC60 DC60/2 DC60/1 Measuring plate cover MPC/DC60 (double cone) D=60mm, stainless steel for series 1, RSXXX and MARS (Peltier) Double cone DC60/2, D=60mm, low inertia with cover for RV/RS Double cone DC60/1, D=60mm, low inertia with cover for RV/RS UTCP/P Measuring geometries: plate-plate (disposable) Holder for disposable plate PP-E, with ceramic shaft for RV/RS MPC/MP20-E PP20E MP20E Measuring plate cover as holder for disposable measuring plate MP20-E for series 1, RSXXX and MARS (Peltier) Disposable plate (upper geometry) PP20E (100pcs.) made of aluminium for RV/RS Disposable measuring plate (lower measuring geometry) MP20-E (100pcs.) made of aluminium for RV/RS MPC/MP60-E PP60E MP60E Measuring plate cover as holder for disposable measuring plate MP60-E for series 1, RSXXX and MARS (Peltier) Disposable plate (upper geometry) PP60-E (100pcs.) made of aluminium for RV/RS Disposable plate (lower geometry) MP60-E (100pcs.) made of aluminium for RV/RS UV curing cell PP20E UV Holder for disposable plate PP-E, with ceramic shaft for RV/RS Disposable plate (upper geometry) PP20E (100pcs.) made of aluminium for RV/RS UV curing cell for cone/plate measuring geometry for series 1, RSXXX and MARS (Peltier), without UV light source High temperature sensor system UTC UTCE/P Universal temperature control box UTC Electrical temp. control unit UTCE/P for plate/cone (lower geometry), control box ( ) and MP are required Kegelheizung: siehe Zubehör HAAKE MARSA Air pressure switch (2 magnetic valves) for UTC-E for connection to the control box ( ) Set for water cooling for electrical temperature control unit UTC Ring Ring Protection ring out of glass, H=23mm (2pcs.) Protection ring out of glass, H=30mm (2pcs.) 6

8 Measuring geometries: plate-cone and plate-plate up to 500 C MP60 C60/1H C60/2H C60/4H PP60H MP35 C35/4H C35/2H C35/1H PP35H MP25 PP25H MP20 C20/1H C20/1H TS PP20H PP20H TS MP8 PP8H Measuring plate MP60, D=60mm Cone C60/1 H, D=60mm, with ceramic shaft for RV/RS Cone C60/2 H, D=60mm, with ceramic shaft for RV/RS Cone C60/4 H, D=60mm, with ceramic shaft for RV/RS Plate PP60H, D=60mm, with ceramic shaft for RV/RS Measuring plate MP35, D=35mm Cone C35/4 H, D=35mm, with ceramic shaft for RV/RS Cone C35/2 H, D=35mm, with ceramic shaft for RV/RS Cone C35/1 H, D=35mm, with ceramic shaft for RV/RS Plate PP35H, D=35mm, with ceramic shaft for RV/RS Measuring plate MPC25, D=25mm Plate PP25H, D=25mm, with ceramic shaft for RV/RS Measuring plate MP20, D=20mm Cone C20/1 H, D=20mm, with ceramic shaft for RV/RS Cone C20/1 H TS, D=20mm, with ceramic shaft and thermo shield for RV/RS Plate PP20H, D=20mm, with ceramic shaft for RV/RS Plate PP20H TS, D=20mm, with ceramic shaft and thermo shield for RV/RS Measuring plate MP8, D=8mm Plate PP8H, D=8mm, with ceramic shaft for RV/RS Ring rotor with 35 mm outer diameter with ceramic shaft for RV/RS PP20E Holder MP20E MP20E PP60E Holder MP60E MP60E Measuring geometries: plate-plate (disposable) Holder for disposable plate PP-E, with ceramic shaft for RV/RS Disposable plate (upper geometry) PP20E (100pcs.) made of aluminium for RV/RS Holder for disposable measuring plate MP20E (lower measuring geometry) Disposable measuring plate (lower measuring geometry) MP20-E (100pcs.) made of aluminium for RV/RS Messgeometrien: Platte-Platte (Einwegsystem) Holder for disposable plate PP-E, with ceramic shaft for RV/RS Disposable plate (upper geometry) PP60-E (100pcs.) made of aluminium for RV/RS Holder for disposable measuring plate MP60-E Disposable plate (lower geometry) MP60-E (100pcs.) made of aluminium for RV/RS TEF/Z28 TEF/Z48 TEE/Z48 Contr.box MP100 Liquid temperature controlled and electrical cylinder sensor systems Temperature controlled cup holder TEF/Z28 up to 200 C Liquid temperature controlled cup holder TEF/Z48 up to 200 C for RSXXX Electric temperature controlled cup holder TEE/Z48 up to 200 C for RSXXX, control box ( ) required Temperature control box for TEE/P ( ) and TEE/C ( ) up to 500 C as well as TEE/Z48 ( ) Measuring plate cover MP100 (TEF/Z48 and TEE/Z48) for RSXXX(using without measuring plate cover) Temperature sensor for MP Sample protection cover with nitrogen-inlet for cylinder measuring geometry for RSXXX Metal armored Viton hoses (2pcs.) up to 150 C with brass connections (2 pcs req.) Adapter (brass) from R1/4' to M16x1 Quick connector adapter, angled (2 pcs. required) Hose connector without valve

9 Measuring geometries: cylinder to DIN53019/ISO3219 for TEF/Z48 or TEE/Z Z40DIN Z40DIN Z20DIN Z20DIN Z10DIN Z10DIN Cup Z40 (TEF/Z48 and TEE/Z48) Rotor Z40 DIN 53019/ISO 3219, low inertia for RV/RS Gasket for cup Z34/40/43, Viton (10 pcs.) Solvent trap for Z40 Cup Z20 (TEF/Z48 and TEE/Z48) Rotor Z20 DIN 53019/ISO 3219, low inertia for RV/RS Gasket for cup Z20, HS28 Viton (10pcs.) Solvent trap for Z10, Z20, Z41, DG41, DG43 Cup Z10 (TEF/Z48 and TEE/Z48) Rotor Z10 DIN 53019/ISO 3219, low inertia for RV/RS Gasket for cup Z10, Viton (10pcs.) Solvent trap for Z10, Z20, Z41, DG41, DG Z20DIN Z20DIN Z10DIN Z10DIN Measuring geometries: cylinder to DIN53019/ISO3219 for TEF/Z28 Cup Z20/D=28mm (TEF/Z28) Rotor Z20 DIN 53019/ISO 3219, low inertia for RV/RS Gasket for cup Z20, HS28 Viton (10pcs.) Cup Z10/D=28mm (TEF/Z28) Rotor Z10 DIN 53019/ISO 3219, low inertia for RV/RS Gasket for cup Z10, Viton (10pcs.) DG41 DG41 DG43 DG41/H Measuring geometries: cylinder, double gap Cup DG41 (double gap) (TEF/Z48 and TEE/Z48) Rotor DG41 DIN 53544, low inertia Rotor DG43 DIN 53544, low inertia for RV/RS Rotor DG41, low inertia, with helical groovings on its inner and outer side against sedimentation for RSXXX Gasket for cup DG41/DG43, Viton (10 pcs.) Z43DIN-E Z41DIN-E Z25DIN-E Z25DIN-E Measuring geometries: cylinder to DIN 53019/ISO 3219 (disposable) Disposable cups Z43E/diameter 48mm (100pcs.) made of aluminium (TEF/Z48 and TEE/Z48) Rotor Z41 DIN 53019/ISO 3219, low inertia for disposable measuring geometry Disposable cups Z25E/diameter 28mm (100pcs.) made of aluminium (TEF/Z28) Rotor Z25 DIN 53019/ISO 3219, low inertia, for disposable measuring geometry Z43 Z41 Z38 Z31 Z43S Z38S Measuring geometries: cylinder Cup Z43 for rotor Z31,Z38,Z41 (TEF/Z48 and TEE/Z48) Rotor Z41, low inertia for RV/RS Rotor Z38, low inertia for RV/RS Rotor Z31, low inertia for RV/RS Gasket for cup Z34/40/43, Viton (10 pcs.) Cup Z43S, serrated (TEF/Z48 and TEE/F48) Rotor Z38S, serrated for RV/RS 8

10 Measuring systems: vane rotors Z40DIN FL40 FL22 FL16 RPIN FL2B Cup Z40 (TEF/Z48 and TEE/Z48) Gasket for cup Z34/40/43, Viton (10 pcs.) Adapter coupling with bore 6mm for RV/RS Vane rotor FL40 (D=40mm) for RV/RS Vane rotor FL22 (D=22mm) for RV/RS Vane rotor FL16 (D=16mm) for RV/RS Rotor with variable number of laterally mounted pins (adapter is req.) Propeller shaped rotor with 2 blades for RV/RS, adapter is not necessary TEF/Z28 HS28-h HS25K-h HS100K-h HS400K Measuring systems: cylinder (high shear) Temperature controlled cup holder TEF/Z28 up to 200 C Cup HS hardened for TEF/Z28 ( ) Gasket for cup Z20, HS28 Viton (10pcs.) Rotor HS25-K hardened, 25µm gap, with cardan joint for RV/RS Rotor HS100-K hardened, 100µm gap, with cardan joint for RV/RS Rotor HS400-K, 400µm gap, with cardan joint for RV/RS Pressure sensor system D100/200 and accessories (accessory can also be used for D50/100, D150/300) D100/200 Pressure sensor cell D100/200 (up to 100bar and 200 C) incl. rupture disc ( ) and ball valve ( ) Cylinder sensor system for measurements under pressure up to 100 bar at temperatures of 200 C for temp. controlled cup holder TEF/Z48 or TEE/Z48 incl. valve, gauge and filling inlet, without P-rotor Temperature sensor for pressure cell system up to 100bar P36 P38 P39 Rotor P36, D=36mm, L=93mm made of steel for pressure sensor system Rotor P38, D=38mm, L=93mm made of steel for pressure sensor system Rotor P39, D=39mm, L=93mm made of steel for pressure sensor system Vane rotor for pressure cell 25/8.8 Vane rotor for pressure cell 30/8.8 Vane rotor for pressure cell 36/8.8 Vane rotor for pressure cell 25/93 Spares for pressure systems D100 D150 Ball valve for D35/50/100 Ball valve for D150/300 Set of gaskets for pressure cell D35/50/100 Set of gaskets for pressure cell D150/300 Saphir bearing (plate and collar) for pressure cell D35/50/100 Rupture disc (spare part) for D100/200 Rupture disc (spare part) ford150/300

11 Pressure sensor system D400/300 and accessories D400/300 P38 P37 P35 Pressure sensor system D400/300 (up to 400bar and 300 C) Cylinder sensor system for measurements under pressure using a HAAKE rheometer (HAAKE MARS or HAAKE RheoStress XXX). Pressure-Temperature-Specification: Pressure: up to 200 bar Temperature: up to 300 C Without limits in measuring sample, security relevant accessory: rupture disk 200bar Pressure: up to 400 bar Temperature: up to 300 C Acc. to guidelines for pressure instruments (97/23/EG) only for fluides which not belong to group 1. Acc. to his guideline it is not allow to measure following samples: explosive, highly inflammable, inflammable, very toxic, toxic and oxidizing samples. Necessary accessory for temperature control: Temperature control unit TEF/Z48 (up to 200 C) Temperiere control unit TEE/Z48 (up to 300 C) Recommended accessory: Temperature sensor, ball valve, P-Rotor is not included. Temperature sensor for pressure cell systems D400/300 Rotor P38, D=38mm made of titanium for pressure sensor system D400/300 Rotor P37, D=37mm made of titanium for pressure sensor system D400/300 Rotor P35, D=35mm made of titanium for pressure sensor system D400/300 Ball valve for D400/300 Set of gaskets for pressure cell D400/300 Rupture disc (spare part) for D400/300 Hand pump (Enerpac P141 modified) incl. connectors to use with pressure measuring cells D100/200 or D400/ D70/300/H P36-H P38-H P39-H Hastelloy-pressure sensor system and accessories Press. sensor syst. Hastelloy (up to 70bar and 300 C) incl.ball valve, press. gauge, rupture disc (spare part), gaskets Temperature sensor for pressure cell system up to 100bar (Hastelloy) Ball valve for D70/300, Hastelloy Set of 3 gaskets for pressure cell D70/300, Hastelloy (2x5 Kalrez) Jewel bearing (plate and collar) for D70/300, Hastelloy Rupture disc (spare part) ford100, Hastelloy Pressure gauge for D70, Hastelloy Rotor D=36mm, L=93mm (D35/D50/D100), Hastelloy Rotor D=38mm, L=93mm (D35/D50/D100), Hastelloy Rotor D=39mm, L=93mm (D35/D50/D100), Hastelloy 10

12 Sensors and accessories for electro-rheology TEF/P Z40ER Z20ER PP60ER PP35ER Liquid controlled base plate for cone/plate geometry up to 350 C, measuring plate (MP) and circulator required Rotor Z40ER, 2 measuring tubes for 0.5 and 1mm gap with bottom, for temperature control units with D=40mm for RSXXX and MARS Rotor Z20ER, 2 measuring tubes 0.5 and 1mm gap with bottom, for temperature control units with D=28mm for RSXXX and MARS Plate PP60ER, D=60mm, with insulated shaft Plate PP35ER, D=35mm, with insulated shaft R26 R29,5 1 mm 0 mm 2 mm Measuring Cell for Construction Material Measuring cell for building materials for HAAKE rheometers (RSXXX, MARS) inkl. 2mm profile Consisting of holder and cup with interchangeable 2 mm profile out of stainless steel (1.4305). Inner diameter of the cup: 74 mm Necessary accessories: Measuring geometry Vane rotor R26mm for rough-grained material Vane rotor R29,5mm for construction material with medium size particles Adaptation (only for HAAKE MARS needed) Adapter for measuring cell for construction materials for HAAKE MARS Optional accessories: Set of 1mm profile (8 pcs.) Set of 0 mm profile (8 pcs.) Set of 2 mm profile (8pcs.) Vane Rotor R26 mm Vane Rotor R29,5 mm Measuring cell cover for measuring cell for building materials Set of lamellas with profile depth 1 mm (8 pcs.) Set of lamellas with profile depth 0 mm (8 pcs.) Set of lamellas with profile depth 2 mm (8 pcs.) SHRP PP25H PP8H Temp set SHRP bitumen sensor Temperature controlled system bitumen SHRP for RSXXX and MARS Temperature control unit (liquid) for HAAKE rheometers, for plate / plate measurements acc. to SHRP Temperature range: -40 C up to 150 C with standard connectors with quick fit, circulator and hoses required. Plate PP25H, D=25mm, with ceramic shaft for RV/RS Plate PP8H, D=8mm, with ceramic shaft for RV/RS Test specimen with integrated temperature sensor and display SHRP bitumen sample preparation tool 11

13 UV curing cell TEF/P UV UTC UTCP/P UV PP20E Liquid controlled base plate for cone/plate geometry up to 350 C, measuring plate (MP) and circulator required UV curing cell for cone/plate measuring geometry for RSXXX, without UV light source Universal temperature control box UTC Peltier temperature control unit for cone/plate measuring geometry, -60 up to 200 C for RXXX and MARS (control box UTC is required) UV curing cell for cone/plate measuring geometry for series 1, RSXXX and MARS (Peltier), without UV light source Holder for disposable plate PP-E, with ceramic shaft for RV/RS Disposable plate (upper geometry) PP20E (100pcs.) made of aluminium for RV/RS 12

14 Accessories for HAAKE MARS Order No. Type Description HAAKE MARS USB-RS232 USB-Ethernet Cable Adapter for using RSXXX-temperature control units for HAAKE MARS Holder for existing RS600/300 temperature control units, not necessary for UTCP/P (new) Set of cables to swap-out the lift electronic Mounting rods for HAAKE MARS USB-RS232 Adapter USB-Ethernet Adapter for HAAKE MARS RS232 cable (9PIN female - 25PIN male) High temperature sensor system UTCE/C Electric cone heating system UTCE/C for HAAKE MARS, control box ( ) required Measuring Cell for Construction Material ER Liquid temperature control unit for measuring cell for construction material for HAAKE MARS Temperature sensor with swing mechanism for HAAKE MARS HAAKE MARS adapter plate for cell for construction materials, necessary accessory for the adaptation of the temperature control unit ( ) Electro-rheology ER adapter device for AC/DC high voltage for HAAKE MARS, up to 10 kv Adapter for high voltage transmission to ER rotors for HAAKE rheometers Safety Device HAAKE MARS for ER application 13

15 Controlled Test Chamber (CTC) for HAAKE MARS CTC Low Temp Controlled Test Chamber (CTC), 30 up to 600 C Test chamber consisting of two active chamber halves for a homogeneous temperature distribution and measurements in a wide temperature range: 30 up to 600 C, can be extended down to -150 C with Low temperature options. Key features: Two movable chamber halves (mounting rods: required) Parking position for easy exchange of temperature control units and measuring geometries as well as for pre-heating and -cooling during sample loading and trimming Tool with defined angle-positions with 45 -steps for turning the lower holder for exchangeable measuring geometries for optimum observation of the sample Two observation windows for observation of the sample during measurement Controlled heating and cooling using a combination of convection and radiation for maximum heating and cooling rates as well as minimum temperature gradient within the sample Controller box for temperature chamber and evaporation unit Recommended accessory: safety gloves for higher or lower temperatures Transformer for CTC Transformer necessary accessory for temperature control chamber CTC, if input voltage is not 230V. Frequency range: 50-60Hz Input voltage: 115V, 125V, 230V, 240V (+/- 10%) Output voltage: 230V (or 115V, 125V, 240V) Mounting rods for HAAKE MARS Option "Low temperature", premium version with optimized energy consumption, down to-150 C for CTC Optional extension of the standard temperature range of the Controlled Test Chamber. For measurements down to -150 C using liquid nitrogen. Consisting of: Unit for evaporation of liquid nitrogen within an available Dewar-vessel (standard-dewar with opening diameter 50mm) Unique, double-walled vacuum connection unit for prevention of condensation enables an easy movement of the chamber halves over the whole temperature range Recommended accessory: safety gloves for low temperatures Dewar vessel (50l) Double-walled vacuum vessel for storing liquid nitrogen with 50 litres volume and standard opening 50mm 14

16 Accessories for CTC Solid PP35 Ex PP35 Ex C35/4 Ex C35/1 Ex PP20 Ex PP20 Ex C20/1 Ex PP25 Ex PP25 Ex PP8 Ex PP8 Ex Solid clamps incl. temperature sensor Unique clamp set for solids with self-centering and wire strainer consisting of upper and lower clamp. With defined angle-positions with 45 steps for turning the lower holder. Incl. adjustable temperature sensor for temperature measurements closed to the sample. For measurements according to DIN / ISO Clamp jaws for soft samples Clamp jaws for medium samples (spare part for solids clamps) Clamp jaws for hard samples Lower holder for exchangeable measuring geometries incl. temperature sensor for MARS Temperature sensor for lower shaft (CTC) Upper holder for exchangeable measuring geometries for MARS and RV/RS Plate PP35 (exchangeable geometry), as lower or upper geometry, for MARS and RV/RS, holder required Lower Plate PP35 (exchangeable geometry) for MARS and RV/RS, holder required Cone C35/4 (exchangeable geometry) for MARS and RV/RS, holder required Cone C35/1 (exchangeable geometry) for MARS and RV/RS, holder required Lower Plate PP20 (exchangeable geometry) for MARS, holder required Upper Plate PP20 (exchangeable geometry) for MARS and RV/RS, holder required Cone C20/1 (exchangeable geometry) for MARS and RV/RS, holder required Lower Plate PP25 (exchangeable geometry) for MARS, holder required Upper Plate PP25 (exchangeable geometry) for MARS and RV/RS, holder required Lower Plate PP8 (exchangeable geometry) for MARS, holder required Upper Plate PP8 (exchangeable geometry) for MARS and RV/RS, holder required PP20 Ex Alu Plate PP20 (exchangeable geometry out of aluminum), as lower and upper geometry, for MARS (40pcs.= 20 sets), holder required, collection device ( ) recom. Collection device for PP20 exchangeable geometry PP25 Ex Alu Plate PP25 (exchangeable geometry out of aluminum), as lower and upper geometry, for MARS (40pcs. = 20 sets), holder required, collection device ( ) recom. Collection device for PP25 exchangeable geometry PP20E PP35E Disposable plate/plate-measuring geometry consisting of a lower and an uppershaft, incl. press tool for mounting the disposable plates on the shafts andremoval tool to remove the disposable plates from the shaft Temperature sensor for lower shaft (CTC) Disposable plate (upper geometry) PP20E (100pcs.) made of aluminium for RV/RS Disposable plate (upper geometry) PP35-E (100pcs.) made of aluminium for RV/RS SER Tool for HAAKE MARS (CTC) 15

17 RheoScope Module for HAAKE MARS MP60 RO MP60 RO MP60 RO MP60 RO RheoScope module for HAAKE MARS: temperature range -5 C to 120 C (300 C with high temperature option) consisting ofliquid temperature control unit (-5 up to 120 C) incl. heating elements for high temperature extension, cold light source, polarizer, camera and HAAKE RheoWin module Necessary accessories: lens, measuring plate (MP) for RheoScope module and measuring geometry (computer with firewire interface necessary) Necessary accessories for high temperature extension: UTC box generation II, set of cables, valves for cooling using water or air and neccessary hoses Measuring plate MP60 glass 2 mm (sand blasted), D=60mm for RheoScope module Measuring plate MP60 glass 2 mm (transparent), D=60mm for RhoeScope module Exchange kit glass plates 2 mm (sand blasted) for RheoScope module (5 pcs.) Exchange kit glass plates 2 mm (transparent) for RheoScope module (5 pcs.) Measuring plate MP60 glass 1 mm (sand blasted), D=60mm for RheoScope module Measuring plate MP60 glass 1 mm (transparent), D=60mm for RheoScope module Exchange kit glass plates 1 mm (sand blasted) for RheoScope module (5 pcs.) Exchange kit glass plates 1 mm (transparent) for RheoScope module (5 pcs.) Lens5x Lens10x Lens20x Lens50x Lens with 5fold magnification for RheoScope module (Olympus), 2 mm glass plates req. Lens with 10fold magnification for RheoScope module (Olympus), 2 mm glass plates req. Lens with 20fold magnification for RheoScope module (Nachet), 2 mm glass plates req. Lens with 50fold magnification for RheoScope module (Olympus), 1 mm glass plate req C60/1P PP60P C35/1P PP35P C60/1H PP60H C35/1H PP35H PP25H C20/1H PP20H Cone C60/1, D=60mm, low inertia, polished Plate PP60, D=60mm, low inertia, polished Cone C35/1, D=35mm, low inertia, polished Plate PP35, D=35mm, low inertia, polished Cone C60/1 H, D=60mm, with ceramic shaft for RV/RS Plate PP60H, D=60mm, with ceramic shaft for RV/RS Cone C35/1 H, D=35mm, with ceramic shaft for RV/RS Plate PP35H, D=35mm, with ceramic shaft for RV/RS Plate PP25H, D=25mm, with ceramic shaft for RV/RS Cone C20/1 H, D=20mm, with ceramic shaft for RV/RS Plate PP20H, D=20mm, with ceramic shaft for RV/RS Box with cleaning tissues (280pcs.) Fire wire interface (necessary accessory for RheoScope module) UTC controller box Generation II to control the Peltier temperature control unit UTCP/P, the electrical temperature control units UTCE/P and UTCE/C as well as the RheoScope module (high temperature version) Electric cone heating system UTCE/C for HAAKE MARS, control box ( ) required Set of cables for RheoScope module HT, to connect the RheoScope module with the UTC controller box generation II Set of valves for RheoScope module HT for cooling medium water or air, incl. connectors, neccessary accessory: set of cables for water or air cooling Set of hoses for air cooling for RheoScope module HT Set of hoses for water cooling for RheoScope module HT Upgrade kit for HAAKE MARS (Year of manufacturing 2005 / 2006) in order to use the HAAKE MARS with RheoScope module Image Analysis Software SPIP consting of base module with roughness and grain analysis Tool for checking the optical quality of the RheoScope module 16

18 Accessories for HAAKE RheoStress 6000 Order No. Type Description HAAKE RheoStress Display and control unit High temperature sensor system UTCE/C Electric cone heating system UTCE/C for RS600/300, control box ( ) required Electro-rheology E R ER adapter device for AC/DC high voltage for RSXXX, up to 10 kv Adapter for high voltage transmission to ER rotors for Haake rheometers 17

19 Specials (BAs) Delivery time on request Please contact the product manager Order No. Type Description UTCP/P measuring geometries: plate-cone and plate-plate MPC25 PP25 Ti C25/2 Ti C25/1 Ti MPC40 PP40Ti C40/2 Ti C40/0.5 Ti MPC50 PP50 Ti C50/4 Ti C50/2 Ti Measuring plate cover MPC25, D=25mm for series 1, RSXXX and MARS (Peltier) Plate PP25, D=25mm, low inertia for RV/RS Cone C25/2, D=25mm, low inertia for RV/RS Cone C25/1, D=25mm, low inertia for RV/RS Measuring plate cover MPC40, D=40mm for series 1, RSXXX and MARS (Peltier) Plate PP40, D=40mm, low inertia for RV/RS Cone C40/2, D=40mm, low inertia for RV/RS Cone C40/0,5, D=40mm, low inertia for RV/RS Measuring plate cover MPC50, D=50mm for series 1, RSXXX and MARS (Peltier) Plate PP50, D=50mm, low inertia for RV/RS Cone C50/4, D=50mm, low inertia for RV/RS Cone C50/2, D=50mm, low inertia for RV/RS Measuring geometries: plate-cone and plate-plate up to 500 C C25/1 H Cone C25/1 H, D=25mm, with ceramic shaft for RV/RS Measuring geometries: plate-plate (disposable) PP35E Disposable plate (upper geometry) PP35-E (100pcs.) made of aluminium for RV/RS Others Holder and liquid temperature control unit for micro titer plates for HAAKE MARS Universal holder for original containers for HAAKE MARS and RSXXX UV measuring cell for CTC (HAAKE MARS) Tribology Cell Submersion flow cell DuNoüy ring incl. adapter to use with HAAKE MARS, RSXXX Thermo Fisher Scientific Dieselstraße 4 D Karlsruhe Tel.: Fax: info.ctd.de@thermofisher.com 18