IKA Mixing Laboratory kneader (measuring kneader see page 130)

Transcription

1 IKA Mixing Laboratory kneader (measuring kneader see page 130) IKA CATALOG 00/0 Mixing Laboratory kneader HKD 0. Plunger (130), DTM 1 Digital temperature measuring device (109), LT control Circulation thermostat (89), VC Vacuum controller (11), HKD 0.10 Kneading blade (130) HKD-T 0 D IKA High-performance laboratory kneader For processing non-flowable, highly viscous media. Uniform mixing is based on intensive processing by means of wide-bladed kneading elements. The kneading medium is moved within the trough both horizontally and vertically. Additional media quantities may be added during the kneading operation. The double-walled kneading chamber allows cooling or heating of the product The product temperature may be measured directly behind the kneading blades Trough can easily be removed Kneading blades can easily be removed Short kneading time The narrrow gap between the kneading blades and trough wall ensures efficient wipe-off Standard version equipped for vacuum operation Trough cover with inspection glass and safety screen IKA Particle size reduction Dispersers (batch operation) Shape of kneading blades Trough Useful volume min. / max. Total volume Attainable vacuum Trough base for heating up to Bore hole for accomodating temperature measuring sensor PT Drive Motor rating input / output Motor principle Motor protection Nominal torque Speed of front kneading blade Speed of back kneading blade Safety device General data relative humidity Protection class acc. to DIN EN 09 duplex 100 / 300 ml 00 ml 0 mbar 10 C yes stainl. steel (AISI 31 Cb) 30 / 180 W asynchronous thermo contact 48 Nm 3 rpm 18 rpm cover contact 0 x 0 x 380 mm 7 kg - 40 C IP 4 40,00 LB x 400 V / 0 Hz x 30 V / 0 Hz T 8 ULTRA-TURRAX Dispersing instrument for volumes from 0, ml - 0 ml (H O). With rotor-stator configurations which have been specifically developed for tissue decomposition, for clinical and medical diagnostics and for suspensions, e.g. centrifuge products. Mini-dispersing elements with mm diameter for Eppendorf tubes, centrifugal glasses, cuvettes, ect. are available Powerful 100 W drive with infinitely variable speed control ( rpm) Safety provided by 1 V low voltage Lightweight, the drive weighs only 400 g May be optionally used as hand-held or standing instrument Power pack included s not included with delivery Motor rating input / output Volume range (H O) Max. viscosity Speed range Speed adjustment Speed display Noise without dispersing element Overload protection relative humidity Protection class acc. to DIN EN / 70 W 0, - 0 ml.000 mpas min -1 stepless scale (1 - ) 4 db (A) yes 4 x 44 x 0 mm 0,4 kg - 40 C IP 0 s (), Preis T 8.10 / Dispersing station (70) 40,00 LB V 0/0 Hz V 0/0 Hz

2 Dispersers (batch operation) T 10 basic New, competitively priced dispersing instrument for volumes of 0, to 100 ml. A wide speed range allows you to work at high circumferential speeds even with small rotor diameters. Perfect ergonomic finish. Immense speed stability with various media thanks to high performance 1 Watt drive Ideal for manual operation thanks to its light weight and ergonomic form Extremely mobile thanks to direct mains operation (no transformer required) Stainless steel dispersing elements ( mm, 8 mm and 10 mm diameter) can be cleaned quickly and easily as they can be dismounted without tools Plastic disposable dispersing elements in two sizes, particularly suitable for PCR analysis Quick-release coupling makes changing the dispersing elements easy Included with delivery: storage case for drive, clamp, dispersing elements and spare seals and clamp R 00 Available. quarter V 0/0 Hz V 0/0 Hz T 18 ULTRA-TURRAX An excellent dispersing instrument at a remarkable price! Volume range: ml (H O). An extended speed range allows to work at high circumferential speeds. Electronic speed control Electronic temperature control Electronic overload protection Quick release button for dispersing element s not included with delivery s (), Stands (10): R 18, R 18, R 187, R 18 Boss head clamp (108), DZM control.o Revolution counter (111) Motor rating input / output Volume range (H O) Max. viscosity Speed adjustment Speed range Speed stability Speed display Noise without dispersing element Overload protection Permitted ON-time (ON/OFF) General data relative humidity Protection class acc. to DIN EN 09 R 00 Clamp (108), R 104 Stand (10), H 44 Boss head clamp (108), Dispersing elements (4): S 10 N - G, S 10 N - 8 G, S 10 N - 10G, Plastic dispersing elements (): S 10 D - 7 G - KS -, S 10 D - 7 G - KS Motor rating input / output Volume range (H O) Max. viscosity Speed range Speed adjustment Speed display Noise without dispersing element Overload protection Diameter / length of extension arm relative humidity Protection class acc. to DIN EN 09 1 W / 7 W 0, ml 000 mpas stepless rpm < % scale (db) A yes max. 10 min / min. min 4 x 0 x 180 mm 0,4 kg - 40 C IP / 10 W ml.000 mpas rpm stepless scale (1 - ) 78 db (A) yes 13 mm / 1 mm 78 x 78 x 0 mm 1, kg - 40 C IP 0 IKA CATALOG 00/0 Particle size reduction Dispersers 473,00 LB L V 0/0 Hz L V 0/0 Hz 7

3 Dispersers (batch operation) IKA CATALOG 00/0 Particle size reduction Dispersers Configuration example 1 7 T 18 basic ULTRA-TURRAX Dispersing instrument for quantities up to approx ml, page 7. S 18 N - 19 G for quantities between ml, page. R 187 Plate stand, page 10. R 18 Boss head clamp, page 108. RH 3 Strap clamp, page * ID Design ID Design 19,00 E 993 Harry 9910 Harry s notes 19,00 E mighty mouse 9917 number one 7 19,00 E 99 Wildcat 993 Goldfish 19,00 E 994 Sheriff 99 Lab-Chief 473,00...LB 39,00...LB 14,00...LB 31,0...LB 103,00...LB T basic ULTRA-TURRAX Dispersing instrument for quantities up to.000 ml, page 9. S N - 18 G for quantities between ml, page 3. R 187 Plate stand, page 10. R 18 Boss head clamp, page 108. RH 3 Strap clamp, page ,00...LB 408,00...LB 14,00...LB 31,0...LB 103,00...LB 8

4 Dispersers (batch operation) T basic ULTRA-TURRAX High-performance dispersing instrument for volumes from ml (H O). The spectrum of applications ranges from homogenizing waste water samples to the use in laboratory reactors, to dispersion tasks under vacuum / pressure and sample preparation in medical diagnostics. Three types of shaft bearings As standard, the T basic is equipped with a connection for a revolution counter Rotor-Stator configurations have thirty years of proven, guaranteed comparability of test results Wide range of dispersing elements (not included with delivery) s (/3), Stands (10): R 18, R 18, R 187, R 18 Boss head clamp (108), DZM control.o Revolution counter (111), RH 3 Strap clamp (108) 7,00 LB V 0/0 Hz V 0/0 Hz T 0 basic ULTRA-TURRAX High-performance dispersing instrument for volumes from 0, - 30 l (H O). Three types of shaft bearings Several rotor-stator configurations Agitator shaft R 0 allows the use of the T 0 basic as a high-speed stirrer (not included in delivery) Infinitely variable speed control, for continuous operation Reproducible operations due to constant speed even with viscosity changes Large selection of dispersing elements Plug-in connectors facilitate exchange of dispersing elements Electronic safety circuit and smooth start As standard, the T 0 basic is equipped with a connection for the revolution counter Wide range of dispersing elements (not included in delivery) s (4/), Special dispersing elements (8), Stands (10): R 7, R 73, R 71 Boss head clamp (108), DZM control.o Revolution counter (111), RH Strap clamp (108) Motor rating input / output Volume range (H O) Max. viscosity Speed adjustment Speed range Speed stability Speed display Noise without dispersing element Diameter / length of extension arm Overload protection relative humidity Protection class acc. to DIN EN 09 Motor rating input / output Volume range (H O) Max. viscosity Speed adjustment Speed range Speed stability Speed display Noise without dispersing element Diameter / length of extension arm Overload protection relative humidity Protection class acc. to DIN EN / 300 W ml.000 mpas stepless rpm 1 % scale 73 db (A) 13 mm / 17 mm yes x 80 x 40 mm 1, kg - 40 C IP / 700 W 0, - 30 l.000 mpas stepless rpm 1 % scale 7 db(a) 1 mm / 0 mm yes 1 x 10 x 37 mm kg - 40 C IP 1 IKA CATALOG 00/0 Particle size reduction Dispersers 1.407,00 LB V 0/0 Hz V 0/0 Hz 9

5 Dispersers (batch operation) IKA CATALOG 00/0 Particle size reduction Dispersers Configuration Example 1 3 T 0 basic ULTRA-TURRAX Dispersing instrument for quantities up to approx. 30 l, page 9. S 0 N - G 4 G for coarse crushing, page 4. S 0 N - G 4 F for subsequent fine crushing, page ,00...LB 1.037,00...LB 1.144,00...LB 4 3 R 73 Telescopic stand, page 10. R 71 Boss head clamp, page 108. RH Strap clamp, page ,00...LB 8,0...LB 19,00...LB 0

6 Dispersers (batch operation) Example of the S 0 N G 4 M dispersing element set-up For dispersing instrument T 8 T 18 T T 0 T Shaft / Agitator shaft S 8 S 18 S S / R 0 S T D ULTRA-TURRAX The high-performance T D dispersing instrument has been designed for typical pilot plant stations quantities from - 0 l (H O). Three rotor-stator configurations for a variety of applications (not included with delivery) Plug-in connectors facilitate exchange of dispersing elements Speed controller on request Dispersing instruments for the production area: ask for our process technology catalogs Cables and plugs not included with delivery s (4), T 3 Stand (107), SI 400 Safety switch (39), SI 474 Fixing device (39) Motor rating input / output Volume range (H O) Max. viscosity Speed range - fixed Speed stability Noise without dispersing element Overload protection relative humidity Protection class acc. to DIN EN / 1.00 W - 0 l.000 mpas 7.00 rpm % 7 db (A) yes 190 x 80 x 380 mm 8 kg - 40 C IP 4 3.4,00 LB x 400 V 0 Hz x 30 V 0 Hz With seal or bearing type* N N N / KR / KV / NK N / KV / KR / KG - HH KG - HH Generator (G) or element (W)** s The variety of media to be processed also requires a variety of rotor-stator configurations and seals. In many cases it is neccessary to use subsequently two dispersing elements, for pre-crushing and fine crushing. The plug-in connectors facilitate the exchange of the dispersing elements. * N = N = PTFE bearing, KR = Ball bearing with Viton - seal, KV = Ball bearing with vacuum-tight sliding-ring seal with silicon carbide seal rings, NK = PTFE bearing with additional ball bearing without seal, KG - HH = Ball bearing with sliding-ring seals of hard metal allow with FFPM seal rings ** G = proved configuration, W = special element *** G = coarse, M = medium, F = fine G / W G With outer diameter (mm) / 8 10 / 19 8 / 10 / 18 / 19 / 4 / / 80 Degree of fineness achieved*** G G G / F G / M / F G / M / F IKA CATALOG 00/0 Particle size reduction Dispersers 1

7 s (T 8, T 18 basic, T basic) 1 S 8 N - G S 8 N - 8 G S 18 N - 10 G S 18 N - 19 G L00439 L00440 IKA CATALOG 00/0 Particle size reduction Dispersers Gap between rotor and stator Circumferential speed ph range Suitable for solvents Suitable for abrasive substances Min. vacuum Max. pressure Ultimate fineness, suspensions Ultimate fineness, emulsions Gap between rotor and stator Circumferential speed ph range Suitable for solvents Suitable for abrasive substances Min. vacuum Max. pressure Ultimate fineness, suspensions Ultimate fineness, emulsions T 8 T 8 T 18 basic T 18 basic 0, - ml 1-0 ml ml ml mm 8 mm 10 mm 19 mm 3,8 mm,1 mm 7, mm 1,7 mm 0,1 mm 0,7 mm 0,3 mm 0,4 mm,0 m/s 8,0 m/s 9,4 m/s 1,9 m/s / 8 mm / 110 mm / 70 mm 3 / 170 mm 10 mm 140 mm 108 mm 04 mm PTFE, AISI 31L PTFE, AISI 31L PTFE, AISI 31L PTFE, AISI 31L yes yes yes yes yes yes yes yes 180 C 180 C 180 C 180 C all methods all methods all methods all methods μm - μm 10-0 μm 10-0 μm 1-10 μm 1-10 μm 1-10 μm 1-10 μm S NK - 19 G S N - G S KR - G T basic T basic T basic ml ml ml 19 mm mm mm 1,7 mm 17 mm 17 mm 0,3 mm 0, mm 0. mm 1,9 m/s 1,4 m/s 1,4 m/s 40 / 1 mm 40 / 1 mm 40 / 18 mm 194 mm 194 mm 194 mm PTFE, AISI 31L PTFE, AISI 31L Viton, AISI 31L yes yes no yes yes no 10 C 180 C 80 C wet chemical all methods wet chemical mbar μm 1-0 μm 1-0 μm 1-10 μm 1-10 μm 1-10 μm Additional rotor for dispersing elements S N - 18 G, S KR - 18 G, S KV - 18 G Gap between rotor and stator Circumferential speed Applications Slab rotor SW ,8 mm 0,3 mm 1,1 m/s stainl. steel AISI 31L viscous, fibrous tissue

8 s (T basic) S N - 8 G S N - 10 G S N - 10 G - VS S N - 18 G S KR - 18 G S KV - 18 G T basic T basic T basic T basic T basic T basic 1-0 ml ml ml ml ml ml 8 mm 10 mm 10 mm 18 mm 18 mm 18 mm,1 mm 7, mm 7, mm 1,7 mm 1,7 mm 1,7 mm 0, mm 0,3 mm 0,3 mm 0,3 mm 0,3 mm 0,3 mm 7,7 m/s 9,4 m/s 9,4 m/s 1,9 m/s 1,9 m/s 1,9 m/s 7 / 8 mm / 8 mm / 8 mm 40 / 1 mm 40 / 18 mm 40 / mm 108 mm 10 mm 10 mm 194 mm 194 mm 70 mm PTFE, AISI 31L PTFE, AISI 31L PTFE, AISI 31L PTFE, AISI 31L Viton, AISI 31L FFPM / SIC, AISI 31L yes yes yes yes no yes yes yes yes yes no no 180 C 180 C 180 C 180 C 80 C 0 C all methods all methods all methods all methods wet chemical wet chemical mbar 1 mbar bar 10-0 μm 10-0 μm 10-0 μm 10-0 μm 10-0 μm 10-0 μm 1-10 μm 1-10 μm 1-10 μm 1-10 μm 1-10 μm 1-10 μm S KV - G S N - F S KR - F S KV - F S KV - G - IL S KV - F - IL T basic T basic T basic T basic T basic T basic ml ml ml ml inline inline mm mm mm mm mm mm 17 mm 18 mm 18 mm 18 mm 17 mm 18 mm 0, mm 0, mm 0, mm 0, mm 0, mm 0, mm 1,4 m/s, m/s, m/s, m/s 1,4 m/s, m/s 40 / mm 40 / 1 mm 40 / 18 mm 40 / mm 40 / 8 mm 40 / 8 mm 70 mm 194 mm 194 mm 70 mm 110 mm 110 mm FFPM / SIC, AISI 31L PTFE, AISI 31L Viton, AISI 31L FFPM / SIC, AISI 31L FFPM / SIC, AISI 31L FFPM / SIC, AISI 31L yes yes no yes yes yes no yes no no no no 0 C 180 C 80 C 0 C 0 C 0 C wet chemical all methods wet chemical wet chemical wet chemical wet chemical 1 mbar - 0 mbar 1 mbar 1 mbar 1 mbar bar - - bar bar bar 1-0 μm - μm - μm - μm 1-0 μm - μm 1-10 μm 1 - μm 1 - μm 1 - μm 1-10 μm 1 - μm SV NS 9 Screw cap For dispersing operations (use seal types KR and KV) in ground section apparatus and for operations under hermetically sealed conditions or in a protective gas atmosphere (for dispersion elements used with the T basic). Seal diameter Material,00 LB mm borosilicate glass, PTFE IKA CATALOG 00/0 Particle size reduction Dispergieren Dispersers 3

9 s (T 10 basic) IKA CATALOG 00/0 Particle size reduction Dispersers Gap between rotor and stator Circumferential speed ( rpm) ph range Suitable for solvents Suitable for abrasive substances Min. vacuum Max. pressure Ultimate fineness, suspensions Ultimate fineness, emulsions s (T 0 basic) Circumferential speed ph range Suitable for solvents Suitable for abrasive substances Min. vacuum Max. pressure Ultimate fineness, suspensions Ultimate fineness, emulsions S 0 N - G 4 G S 0 KR - G 4 G S 0 N - G 4 M S 0 KR - G 4 M 7 8 S 0 N - Special length shafts also available in 430 mm (order label S 0 N 1) S 10 N - G S 10 N - 8 G S 10 N - 10 G ,00...LB 70,00...LB 70,00...LB T 10 basic T 10 basic T 10 basic 0, - 10 ml 1-0 ml ml mm 8 mm 10 mm 3,8 mm,1 mm 7, mm 0,1 mm 0, mm 0, mm m/s 9, m/s 11,9 m/s 0 / 7 mm 0 / 9 mm 0 / 100 mm 9 mm 11 mm 11 mm PTFE, AISI 31L PTFE, AISI 31L PTFE, AISI 31L yes yes yes yes yes yes 180 C 180 C 180 C all methods all methods all methods μm - μm - μm 1-10 μm 1-10 μm 1-10 μm T 0 basic T 0 basic T 0 basic T 0 basic 0, - 0 l 0, - 0 l 0, - 1 l 0, - 1 l 4 mm 4 mm 4 mm 4 mm 3 mm 3 mm 40, mm 40, mm 18,8 m/s 18,8 m/s 1, m/s 1, m/s 70 / 0 mm 70 / 0 mm 70 / 0 mm 70 / 0 mm 300 mm 300 mm 90 mm 90 mm PTFE, AISI 31L Viton, AISI 31L PTFE, AISI 31L Viton, AISI 31L yes no yes no yes no yes no 180 C 80 C 180 C 80 C all methods wet chemical all methods wet chemical mbar mbar μm μm - 0 μm - 0 μm μm μm - 0 μm - 0 μm 4

10 s (T D) 4 S KG - HH - G G S KG - HH - G M S KG - HH - G F Circumferential speed ph range Suitable for solvents Suitable for abrasive substances Min. vacuum Max. pressure Ultimate fineness, suspensions Ultimate fineness, emulsions T D T D T D - 0 l - 40 l - 30 l mm mm mm 8 mm 8 mm 8 mm 1,9 m/s 1,9 m/s 1,9 m/s 90 / 40 mm 80 / 40 mm 80 / 40 mm 0 mm 10 mm 00 mm FFPM / SIC, AISI 31L FFPM / SIC, AISI 31L FFPM / SIC, AISI 31L yes yes yes no no no 180 C 180 C 180 C wet chemical wet chemical wet chemical 1 mbar 1 mbar 1 mbar bar bar bar - 7 μm 0-0 μm - 0 μm - μm - 1 μm 1-10 μm S 0 N - G 4 F S 0 KR - G 4 F S 0 KV - G 4 G - IL S 0 KG - HH - G 4 G S 0 KG - HH - G 4 M S 0 KG - HH - G 4 F T 0 basic T 0 basic T 0 basic T 0 basic T 0 basic T 0 basic 0, - 10 l 0, - 10 l inline 0, - 0 l 0, - 1 l 0, - 10 l 4 mm 4 mm 4 mm 4 mm 4 mm 4 mm 40 mm 40 mm 3 mm 3 mm 40, mm 40 mm 0,9 m/s 0,9 m/s 18,8 m/s 18,8 m/s 1, m/s 0,9 m/s 70 / 0 mm 70 / 0 mm 70 mm 70 / 0 mm 70 / 0 mm 70 / 0 mm 90 mm 90 mm 10 mm 300 mm 300 mm 90 cm PTFE, AISI 31L Viton, AISI 31L FFPM / SIC, AISI 31L FFPM / SIC, AISI 31L FFPM / SIC, AISI 31L FFPM / SIC, AISI 31L yes no yes yes yes yes yes no no no no no 180 C 80 C 0 C 180 C 180 C 180 C all methods wet chemical wet chemical wet chemical wet chemical wet chemical mbar 1 mbar 1 mbar 1 mbar 1 mbar - - bar bar bar bar μm μm μm μm - 0 μm μm 1-10 μm 1-10 μm μm μm - 0 μm 1-10 μm IKA CATALOG 00/0 Particle size reduction Dispersers

11 s Plastic dispersing elements for T 10 basic: 1 Packing unit (pcs.) S10 D - 7G - KS - S10 D - 7G - KS IKA CATALOG 00/0 Particle size reduction Dispersers 3 4 Circumferential speed ( rpm) Plastic materials used approved by FDA. Plastic dispersing elements for T 18 basic: Packing unit (pcs.) Circumferential speed ( rpm) * incl. 1 Disposable tube Plastic materials used approved by FDA. T 10 basic T 10 basic 1-0 ml 1-40 ml 7 mm 7 mm 4,8 mm 4,8 mm 7, m/s 7, m/s 0 / 4 mm 0 / 90 mm mm 110 mm Polycarbonate (PC), Polycarbonate (PC), Polysulfon (PSU) Polysulfon (PSU) 100 C 100 C yes, autoclavable yes, autoclavable S18 D - 10 G - KS S18 D - 14 G - KS * 10* * 10* T 18 basic T 18 basic ml ml 10 mm 14 mm,7 mm 9, mm 8, m/s 1 m/s 1 / 8 mm 1 / 8 mm 10 mm 10 mm Polycarbonate (PC), Polycarbonate (PC), Polyetheretherketon (PEEK) Polyetheretherketon (PEEK) 100 C 100 C yes, autoclavable yes, autoclavable 1 3 4

12 s Plastic dispersing elements for T basic: Packing unit (pcs.) S D - 10 G - KS S D - 14 G - KS * 10* * 10* Circumferential speed ( rpm) * incl. 1 Disposable tube Plastic materials used approved by FDA. Plastic dispersing elements are ideal for those applications where absolutely no cross-contamination is permitted. They are disposable and can be thrown away after a single use. The element is disposable and designed for one-way use. However, it can be re-used several times in applications where this is permitted. If you decide to re-use the element, make sure that you follow the cleaning instructions carefully. Example use: homogenizing tissue samples. Nomenclature for S D - 10 G - KS S : shaft for drive T D: without seal 10 G: diameter stator 10 mm, coarse KS: plastic Disposable tube S 0 18/-ET0 0 ml for attaching onto plastic tools from S 18 D and S D series. Allows dispersing in a closed system (splash guard). T basic,00 LB 3400 T basic ml ml 10 mm 14 mm,7 mm 9, mm 8, m/s 1 m/s 1 / 8 mm 1 / 8 mm 10 mm 10 mm Polycarbonate (PC), Polycarbonate (PC), Polyetheretherketon (PEEK) Polyetheretherketon (PEEK) 100 C 100 C yes, autoclavable yes, autoclavable Material PP IKA CATALOG 00/0 Particle size reduction Dispersers 7

13 Special dispersing elements (T 0 basic) IKA CATALOG 00/0 Particle size reduction Dispersers 1 1 R 0 high speed stirring shaft With the stirring shaft R 0, the T 0 basic is quickly converted into a high speed stirrer. 700 W and rpm are provided for rapid mixing, dissolving, and disagglomerating pigment agglomerates. The conical shaft is supported by means of ball bearings, the mixing elements have a screw connection. For operational safety a protective cage is fitted around the mixing element. 77,00 LB R 140 Propeller R 140 Dissolver Immersion depth Max. circumferential speed Max. permissible rotor diameter Material 90,0 LB R ,00 LB R 140 S W 80 SMK Jet mixer head For shortening mixing and dissolving times. The vertical flow and the high circumferential speed up to rpm ensure intensive mixing. The head is used for adding gases or liquids, for lump-free suspension of difficult to dissolve powders or for dissolving sedimented, already hardened substances. s (8): R 140, R 140 Included with delivery (Page): Dissolver R 140 (8) Generator diameter Available seals 1.088,00 LB S 0 N - W 80 SMK 1.19,00 LB S 0 KR - W 80 SMK S 0 N - W SK Cutting head To crush large pieces (up to 0 mm) of fibrous materials, such as vegetation, vegetables and fruit. Generator diameter Available seal 180 mm 0, - 30 l 1,7-3 m/s 0 mm stainl. steel (AISI 31L) 0, - 10 l 4 mm 1-30 l 4 mm 140 / 30 mm 1-0 l 80 mm S 0 N S 0 KR 80 / 30 mm 1-10 l mm S 0 N ,00 LB

14 Dispersers (inline operation) UTL basic Inline ULTRA-TURRAX For circulation or flow-through processings in the laboratory. Simple, compact and sturdy modular design Sterilizable, autoclave-compatible Table-top or stand-supported device, low space requirement Easy disassembly Large delivery capacity of 4,4 to 11, l/min with open outlet (the mounting of a valve can reduce the flow rate) For air-free, sterile, and inline suspension, emulsyfying and desagglomeration For vacuum or pressurized operation (up to bar) If the DK.11 is used, air induction is also prevented in batch operation Not self-priming A pump can be integrated between intake nozzle and vessel. As a result, viscous fluids can be processed Not suitable for continuous operation or cyclical continuous operation Flow rate (H O) Speed range Max. operating temperature humidity Protection class acc. to DIN EN 09 Chamber volume Min. vacuum Max. pressure 11, l/min rpm stainl. steel (AISI 31L), FFPM 180 C 40 x 100 x 10 mm 3,8 kg - 40 C IP 0 ml 1 mbar bar.43,00 LB V 0/0 Hz V 0/0 Hz UTL 0 basic Inline ULTRA-TURRAX For circulation or flow-through processings in the laboratory or pilot plant stations. Stand-supported device, low space requirement Large flow rate of 4 l/min with open outlet (the mounting of a valve reduces the delivery capacity) For vacuum or pressurized operation to bar If the DK 0.11 is used, air induction is also prevented in batch operation Not suitable for continuous operation or cyclical continuous operation Additional features as UTL basic inline. S KV - F - IL (3) Included with delivery (Page): T basic (9), AD Mounting (70), DK.11 Flow chamber (70), S KV - G - IL (3) Flow rate (H O) Speed range Materials in contact with medium Max. operating temperature Humidity Protection class acc. to DIN EN 09 Chamber volume Min. vacuum Max. pressure R 73 Telescopic stand (10), R 71 Boss head clamp (108) Included with delivery (Page): T 0 basic (9), DK 0.11 Flow chamber (70), S 0 KV - G 4 G - IL () 4 l/min rpm stainl. steel (AISI 31L), FFPM 180 C 130 x 10 x 00 mm,1 kg - 40 C IP 1 94 ml 1 mbar bar IKA CATALOG 00/0 Particle size reduction Dispersers 4.031,00 LB V 0/0 Hz V 0/0 Hz 9

15 Disperser accessories DK.11 Flow chamber For S KV IL dispersing elements. Allows inline operation mode, see UTL basic, page 9. Chamber volume Vacuum Pressure ml 1 mbar bar IKA CATALOG 00/0 Particle size reduction Dispersers Batch operation: DK.11 is mounted around the dispersing element. The DK.11 must be at a lower elevation than the surface of the liquid during operation. With this operating mode, no air is drawn in as a result of turbulence in the vessel. 78,00 LB AD Mounting support for DK.11 3,00 LB 00 DK 0.11 Flow chamber For S 0 KV - G IL dispersing elements. Allows operation in inline mode, see UTL 0 basic, page 9. If used in batch mode: DK 0.11 is mounted around the dispersing element. Additional features as DK.11. T 8.10 Dispersion station Allows the T 8 to be used as a stand-supported device. Used to hold dispersing elements Sterilizable, removable working surface Serves as a protective cover for the power pack Stands for T basic and T 0 basic See mechanical accessories, page 10. Chamber volume Vacuum Pressure 1.047,00 LB ml 1 mbar bar 70 4,00 LB 000