Product Catalog. Cleveland Wheels & Brakes. Catalog AWBPC /USA

Transcription

1 Product Catalog Cleveland Wheels & Brakes Catalog AWBPC /USA

2 PRODUCT CATALOG Publication Number: AWBPC /USA AWBPC0001 Issue 10, Dated: November 15, 2012 Reference MANUALS Refer to the applicable Component Maintenance Manual for detailed maintenance / overhaul procedures. Consult the Aircraft Maintenance Manual and Airframe Log Books (for optional installations) to confirm the approved part numbers for the particular aircraft application. If any inconsistencies are observed in this data, please notify Cleveland Customer Support. IMPORTANT NOTE Use of other manufacturer s components with original Cleveland Wheel & Brake assemblies will void the Cleveland Wheels & Brakes warranty. SAFETY WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application, including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by and its subsidiaries at any time without notice. CONTACT INFORMATION Cleveland Wheels & Brakes, 1160 Center Road Avon, Ohio clevelandwbhelp@parker.com Customer Support Fax: Technical Service Hotline: BRAKING ( ) Literature Requests: AWBPC /2012

3 Revision Highlights Product Catalog Cleveland Wheels & Brakes Revision 10, dated November 15, 2012 Page Description of Change 2-8 Hawker Beechcraft: : (update) Brazilian STC applicability to include all models. (add) EASA STC applicability to replace French and German STC applicability Twin Commander Aircraft Corp.: (add) Brazilian STC applicability A (add) Brazilian STC applicability. i

4 Notes Product Catalog Cleveland Wheels & Brakes ii

5 Table of Contents Product Catalog Cleveland Wheels & Brakes PAGE PRODUCT CATALOG Introduction...3 Typical Installation Internal Wheel & Brake...5 External Wheel & Brake...6 SECTION 1: AIRCRAFT/PRODUCT DIRECTORY Original Equipment Introduction Applicability Data Original Equipment - Floats Applicability Data FAA-PMA Replacement Equipment Introduction Applicability Data SECTION 2: KIT DIRECTORY Conversion Kit Introduction Applicability Data Single Engine Twin Engine Experimental Aircraft Wheel & Brake Ship Set SECTION 3: MASTER CYLINDER Part Number Index Design Information Push Type Push Type with Parking Brake Push Type with Reservoir Pull Type SECTION 4: BRAKE ASSEMBLY Part Number Index Drum Type External Design Internal Design SECTION 5: WHEEL ASSEMBLY Part Number Index Auxiliary Type Dolly Tail Nose Main Wheels External Design Internal Design

6 Table of Contents Product Catalog Cleveland Wheels & Brakes PAGE SECTION 6: PARKING VALVE Part Number Index Design Information SECTION 7: MISCELLANEOUS HYDRAULIC ASSEMBLY Part Number Index Actuator Shimmy Damper

7 Introduction Product Catalog Cleveland Wheels & Brakes How to find the part number for your wheel and brake Locate your aircraft, model number, year of manufacture or serial number in the Aircraft / Product Directory or Kit Directory. You will find the wheel and brake assembly number applicable to your aircraft. After determining the required assembly numbers, turn to the Table of Contents on pages 1 and 2 for all Cleveland Wheels & Brakes products, to locate the proper section and page number. NOTE: Illustrations in this catalog are not necessarily exact and should be used as a guide only. Catalog Updates The catalog publication number will reflect the latest issue in effect with a suffix -X (X being the latest issue), e.g. AWBPC The publication number will advance numerically with each update issued. Each page will reflect the latest issue in effect. Refer to the Revision Highlights Page in this publication for details of each update. Consult the Parker Hannifin website, for current publications. For additional information regarding publications on CD-Rom, please contact the Cleveland Wheels & Brakes Technical Support Team. For technical assistance, contact the TECHNICAL SERVICES HOTLINE: clevelandwbhelp@parker.com Fax: BRAKING ( ) 3

8 Introduction Product Catalog Cleveland Wheels & Brakes Part Numbering System Two part numbering methods have been used by Cleveland over the years to identify products. The long form is an eight-digit (computer friendly) number and is used to identify detail and subassembly parts. The short form can contain both alpha and numeric characters. Past practices used the short form number on all of the products. Current practice is the use of the eight-digit format to identify all detail and subassembly components. Top assemblies are identified using the FAA-TSO approval. These are usually short form numbers, but occasionally are long form, or neither form, depending on the era in which the approval was granted. To convert from the short form to the long form, use the following method: 1. Examples of converting older short version part numbers to the current eight-digit format is shown below: Example: becomes For numbers not ending in 00, replace the last two digits with a letter using the table below as a reference. Example: C becomes The following table shows the cross reference of numeric to alpha characters: 01 = A 02 = B 03 = C 04 = D 05 = E 06 = F 07 = G 08 = H 09 = J 10 = K 11 = L 12 = M 13 = N 14 = P 15 = Q 16 = R 17 = S 18 = T 19 = U 20 = V 21 = W 22 = X 23 = Y 24 = Z Letter I and O are deleted, so as not to be confused with the numbers 1 and 0. Quantity Per Assembly The quantity per assembly column for each part number in this catalog represents the total quantity for the top assembly, e.g. brake assembly, wheel assembly, etc. This differs from a bill of material in a component maintenance manual where the quantity of each part number represents the total quantity for the next level of assembly, e.g. subassembly. 4

9 Typical Installation Product Catalog Internal Wheel & Brake 5

10 Typical Installation Product Catalog External Wheel & Brake 6

11 Introduction Product Catalog Original Equipment 1 - STOP - THE WHEEL & BRAKE APPLICABILITY DATA IS ACCURATE TO THE BEST OF OUR KNOWLEDGE. IT IS TO BE USED ONLY AS A GUIDE, AND NOT TO BE CONSTRUED AS THE BASIS FOR AIRCRAFT INSTALLATION APPROVAL. Note! Unless otherwise noted, listed Wheels and Brakes are FAA TSO C26 Approved. For a product to be TSO qualified, it has to have successfully demonstrated its ability to meet minimum performance standards in accordance with FAA recognized rating methods. The TSO approval of a product does not constitute installation approval or applicability on an FAA Type Certificated Aircraft. It is the responsibility of those installing these products to determine that the aircraft installation and its wheel and brake performance requirements are compatible for the TSO ratings of the wheel and brake. TSO approved products must have separate approval for installation in a FAA type certificated aircraft. TSO Approved Products may be installed only if performed under Title 14 CFR Part 43 or the applicable airworthiness requirements. Consult the Airframe maintenance manual, parts catalog, or equipment list (for optional installations), to confirm the approved part number for a particular application. It is the responsibility of the installer to assure that only approved parts have been used. Prior to installing replacement parts, please verify that the wheel and brake assembly numbers as listed match the model numbers as indicated on the nameplates. If unable to identify the parts, contact the Technical Services Hotline. For quick reference, disc and lining part numbers are listed in the directory. Manufacturers and aircraft are listed alphabetically with models listed numerically. For other replacement parts on your assemblies, turn to the numerical assembly listing for a particular parts breakdown. Actions affecting a particular assembly will be noted below each applicability data table. Always check for additional information such as superseding equipment, applicable upgrades and other pertinent information in the numerical assembly listing parts breakdown. For technical assistance, contact the TECHNICAL SERVICES HOTLINE: clevelandwbhelp@parker.com Fax: BRAKING ( ) 1-1

12 Notes 1-2

13 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Aerofab (1) Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly LA and on X (4)(5) X (4)(5) N/A Lining Auxiliary Wheel 1 LA4-180, -200 Amphibian LA-250 Renegade LA-270 Turbo Renegade and on (2)(5) (3)(5) X (4)(5) X (4)(5) C 40-74A (5) N/A (3)(5) B (5) B (5) (6) N/A (6) C (7) N/A (7) D (1) Formerly Lake Aircraft, Inc. (2) is interchangeable with 40-74B. (3) Superseded by 30-51B. (4) Replacement for aircraft equipped with Gerdes Wheels & Brakes. Requires modifications prior to installation. See Airframe manufacturer. (5) For heavy duty option, order Main Wheel Assy and Brake Assy , which is also high corrosion-resistant equipment. (7) High corrosion-resistant, amphibious equipment. Replaces Main Wheel Assy D and Brake Assy D on new production aircraft. See Airframe Manufacturer for applicability. (6) High corrosion-resistant, amphibious equipment. Replaces Main Wheel Assy 40-74B and Brake Assy 30-51B on new production aircraft. See Airframe manufacturer for applicability. Aerospatiale / Socata 100, 110, , 180 Series 110ST Calopin, 160ST Garnement, 180T Galrien, 180GT Gailaard 220, 235 Series, 235G Guerrier (1), 235GT Gabrier, 235CA Gaucho, TB9 Tampico TB10 Tobago TB D J A 40-97D J N/A (5) B (3) E (4) J B TB20, 21 Trinidad (5) B (3) B TB30 Epsilon 40-90B N/A 30-23B (3) pp bp 40-76C TBM700 1 thru thru thru (2) (rotor disc) N/A (2) (wear pad) A 205, 240, 244 and up (2) (rotor disc) N/A (2) (wear pad) A TBM850 All (2) (rotor disc) N/A (2) (wear pad) A (1) Was Rallye Series aircraft. (2) Internal wheel & brake design. (3) Use with airframe supplied torque plate. (4) Upgrade to 40-97F per SB7050. (5) Upgrade to 40-84B per SB

14 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Aerostar Aircraft (1) 600, 601, 601P 171 and on N/A (2) B PA-600A, -601B PA-601P, -60, -700P 1975 and on 40-76F (1) T.C. formerly held by Piper Aircraft. (2) Use with airframe supplied Torque Plate ( LH and RH). Agusta / Caproni Vizzola C22J N/A N/A Agusta / Siai Marchetti - see Siai Marchetti / Agusta / Aermacchi Air Tractor AT (1) N/A X N/A AT-301, -302, (1) N/A A, -400A AT-400, -402, (2) N/A C , -502, -503, -503A AT-401, -401A (3) N/A LH (3) RH (3) AT N/A C AT (4) (6) (7) (5) N/A (4) C A (6) (7) N/A A (1) Tire. (2) 29 x Tire. (3) Not TSO approved - order from airframe manufacturer only. (4) Upgrade to A and A per SB7067 (TSO approved). (5) Supersedes (6) Refer to SB7082 for product improvement information. (7) Refer to SB7089 for inspection information. Allied Ag Cat Corp. (1) G164 Ag Cat 1 thru (2) N/A C (2) (3) N/A (3) Super Ag Cat G164A/450 Super Ag Cat G164A/600 G164B/450 Super Ag Cat G164B/ and up (3) N/A (3) 30-67E (5) (3) N/A (3) 30-67E (5) thru (3) N/A (3) E (5) and up (3) N/A E (3) Super Ag Cat G164B/ (3) N/A (3) 30-67E (5) Super Ag Cat (4) N/A (4) G164C/600 Turbo Ag Cat (4) N/A (4) G164D/T G164D/ST G164D/SST Ag Cat B-Plus/450, B-Plus/ (3) N/A (3) 30-67E (5) (1) T.C. held by Allied Ag Cat Productions Inc. (2) Aircraft equipped with tires. (3) Aircraft equipped with tires. (4) Aircraft equipped with 29 x tires. (5) Heavy duty option. 1-4

15 Applicability Data Model/ Name Year/ Serial Number Main Wheel Assembly Allied Ag Cat Corp. (1) (continued) Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly Lining Auxiliary Wheel Marsh G (4) N/A (4) C-T Turbo Ag Cat Mid Continent (4) N/A (4) King Cat G-164B Super B Turbine (3) N/A E (3) (1) T.C. held by Allied Ag Cat Productions Inc. (2) Aircraft equipped with tires. (3) Aircraft equipped with tires. 1 (4) Aircraft equipped with 29 x tires. (5) Heavy duty option. American Champion Aircraft (1) 7AC to 7EC, 3050 (2) N/A C7000 (2) (6) N/A 7GC Traveller 7GCA, 7GCB, 3040 (5) N/A C2000 (5) (6) 7JC, 7KC, 7GCBA 7EC, 7FC 3040 (5) N/A C2000 (5) (6) 40-2 (4) Tri-Traveller 7ECA, 7GCAA, 1964 and on 40-28D A N/A 7GCBC, 7KCAB, 7SRS 7ACA Champ Thru D A and on 40-78B GCBC Scout (3) N/A B KCAB 40-28D A Decathalon T-250 Aries 40-75G S C (1) Formerly Bellanca/Champion. (2) Mechanical Drum Brake. (3) Tire. (4) Inactive. (5) Hydraulic Drum Brake. (6) Brake Shoe, Includes Rivets. American General - see Grumman American Arctic Aircraft S1B2 Arctic Tern N/A 1022 and on 40-86B Aviat / Pitts / Christen S-1, S-2 Pitts 40-78B N/A Special Series A-1 Husky (1) (1) Inactive - superseded by 30-60A. Avions Pierre Robin (Constructions Aeromatiaques De Bourgogne) 140, 160 (1) T N/A DR400 Series 40-97D E A HR100/120, 200 (1) D (2) N/A 30-63E HR100/200, 210 (1) N HR400 Series (1) N/A N/A 30-52T A R1000 Series (1) N/A N/A 30-63E N/A R2000 Series R3000 Series (1) N/A N/A 30-63E A (1) Order complete main wheel from airframe manufacturer only. (2) Inactive. 1-5

16 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Ayres (1) S2R-600 Thrush 1939R thru 217R (2) N/A (2) (3) 2173R thru 2529R N/A (2) N/A D (2) R and on N/A D S2R N/A H Turbo Thrush S2R R thru 5082R (2) N/A (2) (3) 5083R and on N/A S2R-PZL N/A D (3) S2R-R1340 S2R-R1820 S2R-T11 S2R-T15 T N/A T and on 30-98D S2R-T thru N/A and on 30-98D S2R-T41 S2R-T65 S2R-T65HG T and N/A D (1) Applications may vary on all models due to manufacturer kit changes and field modifications. Bell Helicopter (2) Heavy duty option. (3) Tail Wheel - not original equipment until 1977 however, it is interchangeable on all models. AH-1T, A (3) UH-1H (3) 214ST (4) 1984 and on B (5) N/A A (5) (see brake B (1) (rotor disc) components) A (2)(6) (5) N/A (5) B (1) (5) (rotor disc) N/A A (5) (7) B (1) (1) Nose Wheel, eligible to use 10 ply tire. (2) Nose Wheel, use 6 ply tire only. (3) Dolly Wheel, 4 per helicopter - Not TSO approved. (4) Helicopter equipped with optional landing gear. (5) Internal wheel & brake design. (6) Superseded for this application by B per SB7038. (7) Supersedes Bellanca Aircraft Corporation 17-30A, 17-31A 17-31ATC, 300A Britten-Norman Group 40-75E M C BN-2, BN-2A 1969 thru (6) N/A 30-23A (1) (2) N/A 40-76C BN-2B, BN-2T 1979 and on 40-90B (6) N/A 30-23C (2) (3) D (6) BN-2 Series ALL 40-90F (4) N/A 30-23D (2) (4) BN-2A Mk F N/A 30-66H (5) D BN-2A Mk111-2 BN-2A Mk111-3 Defender E N/A 30-93E D (1) Inactive. (2) Used with (R.H.) or (L.H.) torque plate. Order from airframe manufacture only. (3) Supersedes 30-23A. (4) For aircraft equipped with tires. (5) Supersedes 30-66D per Service Bulletin SB7053. (6) Wheel & Brake Upgrade Kit converts or 40-90B/30-23C to 40-90F/30-23D. TSO approved per PRM

17 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Burkhart Grob - see Grob 1 Caproni Vizzola - see Agusta Cessna 150A, B 1961 to (1) N/A 30-9 (1) (1) thru C (1) (3) N/A 30-9 (1) A (1) (2) (3) (2) D, E 1964 to (1) (1) (1) 40-79A (2) N/A (2) A (2) (4) 150F, G, 1966 to (3) (6) N/A N/A (3) (5) (1) F150F, G 150H, J, K 1968 to A A F150H, J A150K L A150L F150K FA150K, L FRA150L 152 A152 F152, FA and on 1971 and on 1970 and on 1970 to and on 1978 and on 1978 and on 1978 and on (1) (1) Equipment (2) Equipment. Optional. (3) Inactive. (4) Starting with S/N (5) Superseded by 30-63A. (6) Superseded by 40-97A. 150, 152, A to 1973 D (3) (4) N/A N/A C (4) D (3) F150, F to 1976 D (3) (4) N/A C (3) FA152 (Reims) 1976 D (3) (4) N/A C (4) D (3) (Aircraft equipped with McCauley) 1976 to 1977 D (4) D (3) (4) N/A N/A C (4) D to 1981 D (4) and on C (4) (1) Equipment. (2) Equipment. Optional. (3) Inactive. (4) Superseded equipment - refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. 162 SkyCatcher N/A

18 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Cessna - continued 172, 172A, B, C thru (1) Skyhawk D thru (2)(5) E thru M thru 40-76A (2) F thru 40-97A (3)(6) (1) F, G, H thru 40-97A (3)(6) (1) I, K thru 40-97A A (1) L thru 172R 1971 and on A (1) and on F172D F thru (2)(5) F F172E thru M F thru 40-76A (2) F F172F F thru (1) F F172F, G F thru 40-97A (3)(6) F F172G, H F thru 40-97A A F F172K F and on A F172RG Cutlass 172RG0001 and on (1) 172, R to 1973 D (3)(7) N/A N/A C (7) D (3) F172 (Reims) 1973 D (3)(7) N/A C (7) D (2)(4) FR172 (Reims) 1973 to 1974 C (1)(3) (Aircraft equipped 1973 to 1975 D (2)(4) with McCauley) 1976 D (2)(4) 1976 D (7) N/A C (7) D (1)(3) 1977 D (3)(7) N/A N/A C (7) D (2)(4) 1978 to 1981 D (7) C (7) D (1) 1978 D (2) 1982 and on C (7) D (1) 172RG Cutlass 1980 to 1981 D (7) C (7) D (1) 1982 and on C (7) (1) Equipment (2) Equipment. Optional. (3) Inactive. (4) Superseded by D (5) Superseded by 40-76A. (6) Superseded by 30-63A. (7) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. 1-8

19 Applicability Data Model/ Name Year/ Serial Number Cessna - continued Main Wheel Assembly Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly Lining Auxiliary Wheel 175 Skylark thru (1)(3) A, B Cardinal thru 40-97A (5) (1) B and on (1) 177A, B and on 40-76A (2) 177RG, F177RG 1971 and on (1) 177, 177RG 1972 to 1973 C (3) F177RG (Reims) 1973 to 1974 C (1)(3) (Aircraft equipped 1975 D (3)(6) N/A C (6) D (1)(3) with McCauley) 1976 D (6) C (6) D (1) 1977 D (3)(6) N/A N/A C (6) and on D (6) G and on 40-75B N/A 180H thru 40-75D D (3) H and on 30-52N H thru (3) N/A (3) Series 1973 to 1974 D (3)(6) N/A N/A D , D Skywagon (Aircraft equipped D (6) (3) (6) with McCauley) 1974 D (3)(6) N/A N/A D , -6 (6) 1974 to 1978 D (6) and on D (6) B, C, D, E thru (3) E, F thru (2)(3) or 40-76A (2) 182G thru P thru (1) G thru N thru 40-97A A (1) (5) A (2) 30-63A N thru (1) S 1996 and on 40-75B U (1) (1) Equipment (2) Equipment. Optional. (3) Inactive. 1 (4) Superseded by D (5) Superseded by 30-63A. (6) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. 1-9

20 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Cessna - continued 182 Series 1971 to 1973 D (3) F182 (Reims) 1973 D (2)(4) (Aircraft equipped 1973 to 1974 C (1)(3) with McCauley) 1973 to 1975 D (2)(4) 1976 D (7) C (7) D (2)(4) C (7) D (1)(3) 1977 D (3)(7) N/A N/A C (7) D (2)(4) 1978 to 1980 D (7) C (7) D (1) 1978 D (2) T and on D (7) C , -4 (7) D (1) R182, TR182, 1978 and on 40-75B (8) U (8) D (1) FR182 (Reims) 185, 185A thru (3) (3) N/A B thru (3) N/A (3) C, D, E thru 40-75B A185E, F and on 40-75B A185E, F and on 40-75D D (3) (6) A185E thru (3) N/A (3) Series 1973 to 1974 D (3)(7) N/A N/A D , -2 (3)(7) D Skywagon D (7) D , -6 (7) (Aircraft equipped with McCauley) 1974 D (3)(7) N/A N/A 1974 to 1978 D (7) and on D (7) (1) Equipment (2) Equipment. Optional. (3) Inactive. (4) Superseded by D (5) Superseded by 30-63A. (6) Superseded to 30-52N. (7) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. (8) Replaces Main Wheel Assembly D and Brake Assembly D , -4 per Cessna Service Bulletin SEB00-5 and Cessna Service Kit Sk , A188, 188A, 1966 to B B N/A A188A, 188B, A (2) N/A 30-67A A188B, T188C 1973 and on (1)(2) N/A C D A (3) N/A 30-66A (1) Chrome Disc is Standard Equipment. (2) Aircraft equipped with tire. (3) Aircraft equipped with 22 x tire thru A to (3) (3) (2)(3) (1) 40-75B A (2) (1) Equipment. (2) Equipment. Optional. (3) Inactive. 1-10

21 Applicability Data Model/ Name Year/ Serial Number Cessna - continued Main Wheel Assembly Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly Lining Auxiliary Wheel thru B A (2) or (1) U206 U thru 40-75B (1) U U and on 40-75D (5) N (5) (1) P206 P thru 40-75B (1) P P and on 40-75D (5) N (5) (1) 206H, T206H 1996 and on 40-75B U A (2) or 40-75T (5) W (5) (1) 206 Series 1971 to 1973 D (3) (Aircraft equipped 1973 D (2)(4) with McCauley) 1973 to 1974 C (1)(3) 1973 to 1975 D (2)(4) 1974 D (3)(6) N/A N/A D , -4 (6) N/A 1974 to 1978 D (6) and on D (6) D (3)(6) N/A N/A D , -6 (5)(6) to 1978 D (5)(6) and on D (5)(6) D , -6 (5)(6) D (2) 1976 D (2)(4) D (1)(3) 1977 D (2)(4) 1976 and on D (1) 207 Series and on 40-75B F (1) 40-75D (5) E (5) A (2) 207 Series 1971 to 1973 D (3) (Aircraft equipped 1973 D (2)(4) with McCauley) 1973 to 1974 C (1)(3) 1973 to 1975 D (2)(4) 1976 D (2)(4) 1977 D (2)(4) 1974 to 1976 D (1)(3) 1978 and on D (2) 1976 and on D (1) (1) Equipment (2) Equipment. Optional. (3) Inactive. 1 (4) Superseded by D (5) Optional - for tire usage. (6) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. 1-11

22 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Cessna - continued 208 Caravan 1 1 thru N/A A 139 and on B 1 thru N/A A 54 and on A, B thru (2) C thru (2) (2) (2) D thru M thru 40-75B (1) T210F T and on P N/A C N and on 40-75B V P210N 1979 and on 210 Series 1971 to 1973 D (2) (Aircraft equipped with McCauley) 1973 to 1974 C (1)(2) 1974 D (2)(3) N/A N/A D , -4 (3) N/A 1974 to 1978 D (3) and on D (3) D (1)(2) 1976 and on D (1) (1) Equipment. (2) Inactive. (3) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. 303, T and on N/A A A 40-98H (1) N/A 30-66F N/A 305A, B, C, D, 1951 and on 40-97E K E (3), F 40-75F L (2) (1) Equipment. Optional. (2) Used with (Left Hand) and (Right Hand) Torque Plates - order from airframe manufacturer only. (3) Ref: USAF O-1A, -1E, -1G/-1D and 1F (for conversions) all except Model F. 1-12

23 Applicability Data Model/ Name Year/ Serial Number Cessna - continued Main Wheel Assembly Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly Lining Auxiliary Wheel 310 Series 1976 to A N/A 30-28B N/A 1981 and on 40-40D N/A 1976 to 1977 D (1)(4) 1978 to 1980 D (4) 1981 and on D (4) and on 40-40A N/A 30-28B N/A 336 Skymaster thru (1) (1) (1) and on 40-75B A 337, 337A 1965 to A (2) A thru B A (2) N/A 30-61A (3) N/A thru B thru D thru 40-96A (2) D E and on 40-98A N/A 30-69B Series, F D (4) FT337 (Reims) 1973 to 1975 D (4) 1976 D (4) 1977 D (4) 1978 and on D (4) 1 (1) Inactive. (2) Superseded to 40-96E. (3) Superseded by 30-61D for this application. (4) Superseded by A. 340 Series 1972 to A N/A 30-28B N/A 1981 and on 40-40D N/A 1976 to 1977 D (1)(2) 1978 to 1980 D (2) 1981 and on D (2) 401 Series All 40-40A N/A 30-28B A 402 Series All (1) N/A N/A 1981 and on A N/A 1976 to 1977 D (1)(2) 1978 to 1980 D (2) 1981 and on D (2) 404 Titan and on N/A N/A 1976 to 1977 D (1)(2) 1978 to 1980 D (2) 1981 and on D (2) 411, 411A 1965 to A N/A 30-28B A 414 Chancellor 40-40A N/A 30-28B A 414A 1981 and on (1) N/A A N/A 414 Series 1976 to 1977 D (1)(2) 1978 to 1980 D (2) 1981 and on D (2) (1) Inactive. (2) Superseded by A. 1-13

24 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Cessna - continued 421C 1976 to (1) N/A N/A 1981 and on A N/A 421 Series D (1) (3) D (3) 1981 and on D (3) and on (1) N/A (1) D (3) A N/A A and on D (3) 552 (T-47A) (2) (rotor disc) N/A (1) (2) N/A S550 Citation SII (2) (rotor disc) N/A A (2) (wear pad) A-37, T-37 D LC FG (400 Corvalis) LC FG (350 Corvalis) All N/A A G (1) Superseded by A. (2) Internal wheel & brake design. (3) Superseded by A. Christen - see Aviat Cirrus Design Corp. SR (1) N/A (1) SR and on 40-75P AB SR P (2) (2) SR and on N/A B (1) Upgrade to 40-75P/30-52AB per Cirrus Service Bulletin SB2X Reference Parker Service Bulletin SB7084. (2) Upgrade to /30-233B per Cirrus Service Bulletin SB2X Reference Parker Service Bulletin SB7085. Classic Aircraft YMF-5 Waco F5001 and on N/A A (1) (1) Not TSO approved - order from airframe manufacturer only. Columbia Aircraft 300, 350, 400 All A N/A A G Commander - see Grumman American Daimler Benz / M.B.B. B.O N/A (1) B.O. 209 Monsun 40-78B A (1) Inactive. Diamond Aircraft DA20 Katana 40-78E N/A 30-9D N/A DA A N/A A DA42 Twin Star 40-75Z N/A 30-52Z (1) N/A (1) Use with (L.H.) or (R.H.) torque plate. 1-14

25 Applicability Data Model/ Name Eagle Aircraft Co. Year/ Serial Number Main Wheel Assembly Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly 220, 300 Eagle (1) 1 and on N/A A (2) N/A Lining Auxiliary Wheel 1 (1) Originally produced by Bellanca Aircraft for Eagle Aircraft (1979 thru 1981). Eclipse 500 All B (1) N/A C (1) (1) Internal wheel & brake design. (2) Contact Eclipse Aerospace at Ector Aircraft Co., Inc. Civil version of Cessna L-19 Bird Dog, Mountaineer, Super Mountaineer 40-97A A N/A Edgley Aircraft Ltd. - see Lovaux Emair AG Aircraft Co. MA-1B Diablo and on (1) N/A (1) (1) N/A (1) Not TSO approved - order from airframe manufacturer only. Embraer EMB N/A Ipanema EMB-312 (T-27) Tucano N/A 30-95B (1) B (2) or 40-77G (1) Specify LH or RH when ordering. (2) Upgrade to 40-77G is required for 10 ply tire usage. Fairchild Aircraft (1) SA226, SA227 SA227CC All models (2)(3) (1) Formerly Swearingen. (2) Alternate, for spares only. (3) Use existing aircraft axle spacers in place of spacers furnished with the wheel. FFA Flugzeugwerke Altenrhein AG AS202-18A4 224 and on 40-97A A B Found Brothers 100 Centennial 40-75B N/A GAF - Australia N22, N24, N22B 40-75T (1) Q A (2) N24A (3) N/A (3) (1) Supersedes 40-75S. (2) Supersedes 40-76D. (3) Heavy-duty option. General Avia (Italy) F.20, F.20TP 40-75G P N/A F N/A C F N/A C 1-15

26 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Gippsland GA8 All 40-75T N A Great Lakes Aircraft Co. (1) 2T-1A, 2T-1A-1, 2T-1A-2 (1) Resumed production in Grob - Subsidiary of Grob Werke GMBH N/A G103, G103C 40-97A A N/A G109 Series 40-78B G115, -A, -B, -C 40-78B B G115-T B (1) B G115-TA B (2) B (1) Use with torque plate. Order from airframe manufacturer only. (2) Use with (L.H.) or (R.H.) torque plate. Order from airframe manufacturer only. Group Genesis Inc. Genesis B E N/A Grumman American (Gulfstream Aerospace) AA1, A, B, TR-2 All models thru 40-86A B A and on 40-88C B AA-5 All models thru 40-86A B A 1974 AA-5A, -5B (1) 1975 and on 40-88C B A GA N/A 30-23B (3) pp 40-76G bp 112, 112A, B (2) 1 thru A A 500 and on 40-75H H TC, 112TCA, 114, 114B (2) and on 40-75H H A (1) TC currently owned by American General Aviation. (2) TC currently owned by Commander Aircraft. (3) Use with Airframe supplied Torque Plate ( ). Gulfstream Aerospace (1) 690B, 690C, 695, 1980 and on A N/A (3) 695A, (2) B (3) 840, 980, A (3)(4) N/A C (5) D (4)(6) C N/A 30-93A E (1) Formerly Rockwell International. (2) TC Currently owned by Twin Commander. (3) Inactive. (4) Uses Skydrol Fluid only. (5) Supersedes and B. (6) Supersedes A. 1-16

27 Applicability Data Model/ Name Year/ Serial Number Main Wheel Assembly Hawker Beechcraft Corporation Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly Lining Auxiliary Wheel 23, and on C A A (4) or B (2) B19, C33, 24R 1974 to B and on N/A A (4) 33, A33 B33 CD-1 thru 387 CD-388 thru (3) (3) N/A (3) (3) G33, F33A, F33C, V35BTC, 36 CD-1272 thru D CE-301 thru 634 CJ-31 thru 124 D-9193 thru 9861 E-1 thru 824 D-9862 and on 30-54A E F33A, F33C CE-635 thru A A D A36, A36TC CJ-125 thru 155 E-825 thru 1802 EA-1 thru 186 F33A, F33C CE-1072 and on 30-54C E CJ-156 and on A36, A36TC E-1803 thru B A E EA-187 thru 442 A36, B36TC E-2255 and on 30-54C EA-443 and on C55 TE-1 and on N/A N/A D55 TE-452 and on E55 TE-768 and on 40-87A (4) 56TC TG-1 thru TG A A56T TG-84 and on 58 TH-1 and on B55, E55, (1) N/A 30-93B (1) N/A 1979 and on 40-98G N/A 30-66G D (1) N/A 30-93C (1) TC 1984 and on N/A P 1984 and on N/A A (4) B and on N/A C B A (4) N/A 30-59D A (4) T34C A N/A 30-74B (1) Heavy duty option. (2) Equipment. Optional. (3) Inactive. (4) 40-87D, equipped with rubber lip seals, is interchangeable. 1-17

28 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Helio Aircraft Ltd. H-250, H-295, 391, 395 Courier 40-75E A N/A 40-75D N (1) For aircraft equipped with Main Wheels and Brakes T A (1) N/A 30-66A (1) Hunting Firecracker Aircraft Ltd. (1) NDN 1T (2) C N/A 30-83A B (1) Purchased design from NDN Aircraft Ltd. (2) Military Trainer. Industria Unidas SA (Mexico) (1) A-9B N/A (2) (3) N/A (1) Produced by Aeronuatica Mexicana S.A. (2) Use with Airframe supplied Torque Plate (either or ). (3) Inactive - Superseded by 30-41B. LAVIASA (1) PA-25 Pawnee PA , PA B PA C, D PA C, D 25-1 thru thru thru thru and on (2) N/A (3) N/A N/A N/A (3)(4) A A B (3) (1) LAVIASA (Latino Americana de Aviacion S.A., Buenos Aires, Argentina) has purchased the (2) For replacement order , includes rivets.. Piper Pawnee Type Certificate, and now provides Spares Support. (3) Use with airframe supplied torque plate ( ). (4) Superseded by 30-41B. Lovaux (1) EA7 Optica 1 and on (1) Formerly Edgley Aircraft Ltd. 1-18

29 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel M.B.B. - see Daimler Benz 1 Marsh Aviation Co. S2R-T N/A (1) N/A (1) G-164C-T (1) N/A (1) Aircraft equipped with 29 x tires. Maule Air Inc. M4 Series 3040 (1) N/A C2000 (1) (3) N/A 40-97D E M5, M6 Series 40-97D E M7 Series 40-75D (2) N (2) M9 Series 40-75D AC (4) N/A MXT B (1) Aircraft Equipped with Drum-type brakes. (2) Heavy duty option (2 piston brake). (3) Brake shoes, includes rivets. (4) Use with (L.H.) or (R.H.) torque plate. McCulloch J-2 Helicopter 40-78B (1) (1) Some models equipped with nose wheel. Mitsubishi MU2B-20, -25, -26, -26A -30, -35, -36, -36A, -40, Mooney Aircraft Corp. M10 Cadet (1) and on (2) (2) (3) M20, M20A 1001 thru (4) N/A C2000 (4) (5) N/A M20A, M20B, Mark 20, M20C, M20D M20E Super 21 M20C M20E M20F M20G M20J M20K M20 Series All models listed above 1401 thru thru thru & on & on & on & on & on & on (3) (3) N/A (3) (7) A E (6) N/A D (6) M20M All S/N 40-90A (1) Ercoupe. (2) 40-97/30-63 superseded by 40-97A/30-63A. (3) Inactive. (4) Drum-type brake. (5) Brake shoe, includes rivets. (6) Chrome disc equipment. (7) Superseded by

30 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel NDN Aircraft Ltd. (1) NDN6 Fieldmaster (1) TC currently held by Croplease PLC N/A N/A Pacific Aerospace Corp., Ltd. (1) FU24 Fletcher 1978 and on N/A (2) N/A N/A FU FU C FU24A Cresco N/A 30-89E (3) A CT/4E Airtrainer S/N 200 and on 40-97F S CT F S N/A PAC 750XL A (4) N/A A (1) Formerly New Zealand Aerospace Ind. Ltd. (2) Inactive, replaced by 30-32C (both brakes must be changed over). (3) Supersedes (4) Supersedes Partenavia P.64B, P.66B 1970 and on B P.66C-160, P.66T 40-86B B P.68, P.68B, P.68C, P.68C-TC 40-96E E B (1) N/A (1) Series N/A B (1) Heavy duty option. Pilatus PC-12/47E 1231 thru (1) N/A (1) 1258 and on (rotor disc) (wear pad) (2) (1) Internal wheel & brake design. (2) See Pilatus for nose wheel installation kit. 1-20

31 Applicability Data Model/ Name Year/ Serial Number Main Wheel Assembly Piper (The New Piper Aircraft, Inc.) Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly PA , & on (3) (4) N/A PA-18A-150 PA-22 Tri-Pacer 3040 (1) N/A C2000 (1) (2) 40-8 Lining Auxiliary Wheel 1 PA Colt (1) Aircraft equipped with Drum-type brakes. (2) Brake Shoe, includes rivets. (3) Inactive. (4) Superseded by 30-60A A superseded by 30-60B. PA , A (1) N/A (2) PA PA thru B N/A (2) thru 3080D N/A A pp (2) , bp , thru N/A B (1) For replacement order , includes rivets. (2) Aircraft manufactured after 1971 are equipped with 40-76B nose wheel. PA , -250, Comanche thru (1) N/A (5) (2) thru (1) N/A (3) (4) and on B (3) PA and on N/A (3) pp bp (1) For replacement order , includes rivets. (2) Aircraft manufactured after 1971 are equipped with 40-76B nose wheel. (3) Use with airframe supplied torque plate ( ). (4) Inactive - superseded by 30-41B. (5) Use with airframe supplied torque plate ( ) PA-25 Pawnee Series (1) (1) See LAVIASA. 1-21

32 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Piper (The New Piper Aircraft, Inc.) - continued PA Cherokee/Crusier thru thru B and on 1974 and on 40-86B F PA thru Cherokee PA and on PA Cherokee/Warrior PA Cherokee Warrior II PA Cherokee/Archer PA Cherokee/Archer II PA Cherokee/Pathfinder 40-86B A 1979 and on 40-86B B 40-86B B 1977 and on 40-86B D (McCauley) 28-1 thru thru B and on 1974 and on 40-86B F 40-86B F 1979 and on 40-86B and on B 1974 and on 40-86B F PA Dakota B and on A (1) (1) and on PA-28R R thru (2) A Cherokee/Arrow R R A and on 1974 and on 40-86B B PA-28R-200 Cherokee/Arrow and on (McCauley) 40-86B D R thru (2) A 28R R and on 1974 and on 40-86B B 1977 and on (McCauley) 40-86B D PA T, 40-86B B PA-28R-201, PA-28RT-201 PA-28R-201T (McCauley) 40-86B D (1) Heavy duty option. (2) Superseded by 30-41B. 1-22

33 Applicability Data Model/ Name Piper (The New Piper Aircraft, Inc.) - continued PA-30 Twin Comanche Year/ Serial Number Main Wheel Assembly Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly Lining 30-2 thru N/A (1) pp and on N/A bp Auxiliary Wheel and on N/A 40-76B (1) Use with Airframe supplied Torque Plate ( ). PA , -310 Navajo PA Navajo C/R PA Chieftain 31-5 thru N/A B or (1) and on A N/A 30-68A (2) B or (1) thru A N/A 30-68A (2) B or (1) and on (1) (3) N/A 30-95A (1) (4) and on (3) N/A (4) (5) T N/A 30-95A (4) (1) N/A (1) PA-31T Cheyenne I, IA, II and on N/A A (6) N/A PA-31T Cheyenne IIXL T N/A (1) Heavy duty option. (2) Inactive - superseded by 30-68B. (3) supersedes (4) When ordering, specify LH or RH. (5) Inactive - superseded by 30-95A. (6) A has provisions for attachment dust shield. PA Cherokee Six 260 PA Cherokee Six thru N/A and on 40-76B 1974 and on 40-90A F All (1) N/A (1) thru N/A and on N/A B 1974 and on 40-90A F All (1) N/A (1) PA-32R-300 Cherokee/Lance PA-32RT-300 Lance II PA-32RT-300T Turbo Lance II 1976 and on 40-90A B (1) N/A (1) and on (McCauley) (1) N/A (1) D and on 40-90A B (1) N/A (1) and on (1) N/A (1) D (McCauley) and on 40-90A B (1) N/A (1) and on (McCauley) (1) Heavy duty option (1) N/A (1) D

34 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Piper (The New Piper Aircraft, Inc.) - continued PA , 301T Saratoga and SP Series PA Seneca 40-90A B C (1) N/A 30-83A and on N/A and on N/A B 1974 and on 40-90A F All (1) N/A (1) PA T Seneca II PA T Seneca III and on 40-90A B (2) (1) N/A (1) A B or 40-77B C (1) N/A 30-83A (1) (1) Heavy duty option. (2) Supersedes D and D PA N/A B N/A Pawnee Brave PA B B (2) C Tomahawk 40-59D (1) N/A 30-53A (1) (1) (1) Used on early 1980 Aircraft - those equipped with main and nose wheels. (2) Inactive - superseded by PA-39 Twin Comanche (1) Use with airframe supplied Torque Plate ( ) N/A (1) pp bp N/A PA-42 Cheyenne III, IIIA PA (400LS) Cheyenne IV (1) Internal wheel & brake design (1) (rotor disc) N/A (1) (wear pad) PA Seminole and on 40-90A B or D (1) N/A (1) PA T 1 and on (1) N/A (1) (1) Heavy duty option. PA P, -350P C N/A 30-83A B PA Meridian PA TP N/A D Meridian (1) Upgrade from 40-77B per SB7083. Refer to SB7083 for applicability B 40-77G (1) Piper Aerostar - see Aerostar Aircraft Pitts - see Aviat Quest Aircraft Company Kodiak N/A A 1-24

35 Applicability Data Model/ Name Year/ Serial Number Main Wheel Assembly RFB Rhein-Flugzeugbau GmbH (1) Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly RFB 400/600 Fantrainer (2) 40-96E E N/A (1) Subsidiary of MBB. (2) Military Trainer. Lining Auxiliary Wheel 1 Saab-Scania MF1-15, MF1-17 Supporter AC, Mushshak (1) Inactive - Superseded by 30-63E. Sadler Aircraft Corp. A-22 Lasa OPV 40-97D D (1) A 40-78B Schaefer Aircraft Modifications, Inc. (1) PA-31T N/A N/A Comanchero 750 PA Comanchero N/A (1) FAA STC approved modifications of Piper Navajo, Cheiftain, and Cheyenne II, currently manufactured by Embraer. Schleicher ASW20, 21, 22, 23 Sailplane 40-78B C Schweizer (1) SGS2-53, 2-33A 3050 (2) N/A C7000 (2) (3) Sailplane 3050A (2) N/A C7000A (2) (3) I-36 Glider (1) For G-164 series Agricultural Aircraft, see Ag-Cat Corp. (2) Aircraft equipped with Drum-type brakes. (3) Brake Shoe, includes rivets. Siai Marchetti / Agusta / Aermacchi SF E M N/A SF.260, SF.260C 3080A N/A A SF.260M SF.260W 3040 (1) N/A C (2) 40-77A SF.260TP SF.260SW 40-90A A A S (3) (4) N/A (3) (4) (rotor disc) (wear pad) SF.600TP 40-75G P B (1) Aircraft equipped with Drum-type brakes. (2) Brake Shoe, includes rivets. (3) Not TSO approved - order from airframe (4) Internal wheel & brake design. manufacturer only. 1-25

36 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Slingsby Aviation Ltd. T67C, T67M, 40-86B B 200 Firefly 40-86F (1) T-3A TR67GRP N/A B (1) Alternate wheel approved for use with Brake must be used with Slingsby Stock Code Numbers Spacer and Collar. S M E Aerospace MD Socata - see Aerospatiale Sportavia (1) RF6C/RS180 Sportsman 40-86A B A (2) 40-77A (3) (1) Owned by RFB, Subsidiary of FVW-Fokker GmbH. (2) Aircraft equipped with nose wheel. (3) Aircraft equipped with nose wheel. Stol Aircraft Corp. UC-1 Twin Bee (1) A (1) Complete TC modification of Republic Seabee. Swearingen Aircraft SX N/A Taylorcraft Aviation Corp. F-19 Sportsman (1) N/A C7000A (1) (2) N/A F-21, F-21A Trainer/Sport F (1) Aircraft equipped with Drum-type brakes, mechanically operated. (2) Brake Shoe, includes rivets. 1-26

37 Applicability Data Model/ Name Univair Year/ Serial Number Main Wheel Assembly Standard Disc Aircraft/Product Directory Original Equipment Chrome Disc Brake Assembly A2, A2A Alon (1) 40-97A A N/A Lining Auxiliary Wheel C, CD, D, N/A E, G (1) Ercoupe F1, F1A Forney M10 Mooney 40-97A A Cadet (1) J-3, (2) PA-11, PA-12, (10) PA-14, PA-16, PA-18, PA-20 Piper Cub PA-18, PA-20, (4) PA-22/20 Piper Cub (10) (3) 108, 108-1, -2, 3040 (5) (7) N/A C2000 (5) (6) -3, -5 (1) (8) Stinson 40-97E (9) Q (9) (1) TC currently owned by Univair. (2) Inactive - superseded by 30-60A. (3) Aircraft equipped with 1 1/2 inch axles. (4) Inactive - superseded by 30-41B. (5) Aircraft equipped with Drum-type Brakes. (6) Brake shoe, includes rivets. (7) Aircraft equipped with tires. (8) Aircraft equipped with tires. (9) May be used to retrofit earlier models. (10) STC Approved modification of original aircraft. Valmet L-70 Militrainer 40-75S (1) K C L-90 TP Redigo N/A B (1) Inactive - superseded by 40-75T. Varga 2150A/218 Kachina Waco Meteor, Minerva, Vela 40-97E E B 40-97A A

38 Applicability Data Aircraft/Product Directory Original Equipment Model/ Name Year/ Serial Number Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Auxiliary Wheel Weatherly Aviation Co. 201A, 201B N/A D (2) C, A, 620TP, 1520 thru N/A B (1) B 620B 1585 and on E N/A (1) Order from airframe manufacturer only. (2) 30-89B is heavy duty option for model 620. Wing Aircraft D-1 Derringer B (1) A (1) Use with airframe supplied torque plate. WTA Inc. PA , PA-18A-150 Super Cub (1) (2) N/A (1) Acquired rights from Piper Aircraft. (2) Inactive - superseded by 30-60A. 1-28

39 Applicability Data Model/ Name Aerocet, Inc. Year/ Serial Number Main Wheel Assembly Standard Disc Aircraft/Product Directory Original Equipment - Floats Chrome Disc Brake Assembly 3500 Series N/A A (1) C (3) N/A (2) N/A (1) Contains chrome-plated bearings. (2) Brake cylinder assembly (part of brake assembly). Use with manufacturer supplied torque plate. (3) Contains standard bearings. Lining Auxiliary Wheel 1 Baumann Floats, Inc. BF2150 N/A 40-78A C N/A BF2550 BF2750 N/A A (1) N/A N/A (1) Contains chrome-plated bearings. Wipaire, Inc. 2100/2350 Series N/A 40-78A C D /4000 Series 40-87J 3000/3450 Series N/A (1) (3) N/A D /8000/8750 N/A B (2) D Series 10000/13000 Series N/A D N/A 30-67C (1) A (1) Contains chrome-plated bearings. (2) Optional replacement for the Contains standard bearings. (3) Also available as an optional replacement for the is a standard bearings/chrome disc wheel. Contact the Cleveland Technical Hotline for additional information. 1-29

40 Notes 1-30

41 Introduction FAA-PMA Product Directory Replacement Equipment 1 - STOP - BE AWARE THAT THIS LIST GIVES INSTALLATION ELIGIBILITY FOR THE LISTED OEM PART NUMBERS, AND IS NOT NECESSARILY AN INDICATION OF HOW A PARTICULAR AIRCRAFT IS ACTUALLY EQUIPPED. IN ORDER TO USE THE FAA-PMA CLEVELAND PART NUMBER AS LISTED, THE INSTALLER MUST VERIFY THAT THE PART TO BE REPLACED IS INSTALLED ON THE AIRCRAFT MAKE, MODEL AND SERIAL NUMBER (IF APPLICABLE) AS LISTED, AND THAT IT IS THE SAME OEM PART NUMBER AS INDICATED. When ordering replacement parts for the listed assemblies, refer to the numerical assembly listing for the parts breakdown. It is the responsibility of the installer to assure that only approved parts are used. Prior to installing replacement parts, verify that the model numbers as listed herein match the model numbers as indicated on the nameplates of the assemblies to be repaired. If any questions arise, contact the Technical Services Hotline. For technical assistance, contact the TECHNICAL SERVICES HOTLINE: clevelandwbhelp@parker.com Fax: BRAKING ( ) 1-31

42 Applicability Data FAA-PMA Product Directory Replacement Equipment American Champion Aircraft Corp. Model/Name Year/ Serial Number Master Cylinder P/N Parking Valve P/N Cleveland OEM Cleveland OEM 8KCAB, 8GCBC All (A ) 60-5 (A850-1) Diamond Aircraft Industries Model/Name Year/ Serial Number Parking Valve P/N Cleveland OEM DA40 All 60-5D 60-5D General Avia (2) Model/Name Year/ Serial Number Master Cylinder P/N Cleveland OEM F22 All 10-55B (1) 10-55B Grob Aircraft Model/Name Year/ Serial Number Parking Valve P/N Cleveland OEM G115A, G115B, G115C, G115C2, G115D. G115D2 All Hawker Beechcraft Corporation Model/Name Year/ Serial Number Master Cylinder P/N Parking Valve P/N Cleveland OEM Cleveland OEM 19A, B19, A23-19, A23-24, A23A, B23, C23, A24, A24R, B24R, C24R, 76 All N/A N/A F33A, F33C, G33, V35B, 36, A36, A36TC, B36TC All N/A N/A (A-850-8) (60-10) ( ) 77 All (A-850-8) (60-10) ( ) Maule Air Inc. Model/Name Year/ Serial Number Master Cylinder P/N Cleveland OEM M-5-235C, M-6-235, M All A (10-54) Note: Manufacturer Code Numbers shown in Parenthesis ( ). 1-32

43 Applicability Data FAA-PMA Product Directory Replacement Equipment Mooney Aircraft Corp. Model/Name Year/ Serial Number Master Cylinder P/N Parking Valve P/N Cleveland OEM Cleveland OEM M20J, M20M All 10-24D 10-24D (A ) ( ) ( ) M20L All N/A N/A (A ) ( ) ( ) 1 Slingsby Aviation Model/Name Year/ Serial Number Master Cylinder P/N Cleveland OEM T67 GRP Series All 10-30C 10-30C The New Piper Aircraft, Inc. (Piper) Model/Name PA , PA , PA Year/ Serial Number Master Cylinder P/N Shimmy Damper P/N Cleveland OEM Cleveland OEM All ( ) PA All ( ) ( ) PA All A A ( ) PA & on A A ( ) PA & on ( ) PA , PA PA , PA thru ( ) All ( ) ( ) All ( ) ( ) PA & on ( ) PA-28R thru R thru 28R ( ) ( ) ( ) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A ( ) N/A N/A N/A N/A N/A N/A Note: Manufacturer Code Numbers shown in Parenthesis ( ). 1-33

44 Applicability Data FAA-PMA Product Directory Replacement Equipment The New Piper Aircraft, Inc. (Piper) - continued Model/Name Year/ Serial Number PA All ( ) Master Cylinder P/N Actuator P/N Shimmy Damper P/N Cleveland OEM Cleveland OEM Cleveland OEM ( ) PA-28R-200 All ( ) 28R ( ) 28R thru 28R PA T All ( ) ( ) PA-28R-201, All ( ) ( ) PA-28R-201T All ( ) ( ) PA-28RT-201 All ( ) ( ) PA-28RT-201T All ( ) ( ) PA & on ( ) thru ( ) PA All ( ) ( ) PA-30 All ( ) ( ) N/A N/A ( ) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A SFA232-5 ( ) ( ) ( ) SFA232-5 ( ) ( ) ( ) SFA232-5 ( ) ( ) ( ) SFA232-5 ( ) ( ) ( ) ( ) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A ( ) N/A N/A N/A N/A Note: Manufacturer Code Numbers shown in Parenthesis ( ). 1-34

45 Applicability Data FAA-PMA Product Directory Replacement Equipment The New Piper Aircraft, Inc. (Piper) - continued Model/Name Year/ Serial Number PA-31P All ( ) Master Cylinder P/N Parking Valve P/N Shimmy Damper P/N Cleveland OEM Cleveland OEM Cleveland OEM 60-3A ( ) PA-31T All N/A N/A 60-3A ( ) 31T thru T ( ) 31T & on 10-23A 10-23A ( ) PA-31T1 All N/A N/A 60-3A ( ) 31T thru T ( ) 31T thru 31T A 10-23A ( ) 31T & on N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1 PA-31T2 All 10-23A 10-23A ( ) PA All ( ) PA All ( ) 10-23A 10-23A ( ) 60-3A ( ) 60-3A ( ) 60-3A ( ) PA & on N/A N/A 60-3A ( ) 31-5 thru ( ) & on 10-23A 10-23A ( ) N/A N/A N/A N/A N/A N/A ( ) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A & on N/A N/A N/A N/A ( ) PA All N/A N/A 60-3A ( ) thru ( ) & on 10-23A 10-23A ( ) & on N/A N/A ( ) PA-31P-350 All 10-23A 10-23A ( ) PA All ( ) ( ) 60-3A ( ) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Note: Manufacturer Code Numbers shown in Parenthesis ( ). 1-35

46 Applicability Data FAA-PMA Product Directory Replacement Equipment The New Piper Aircraft, Inc. (Piper) - continued Model/Name Year/ Serial Number Master Cylinder P/N Parking Valve P/N Actuator P/N Shimmy Damper P/N Cleveland OEM Cleveland OEM Cleveland OEM Cleveland OEM PA PA-32R-300 PA-32RT-300 PA-32RT-300T PA PA T All ( ) ( ) All ( ) ( ) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A PA-32R-301(SP) PA-32R-301(HP) PA-32R-301T All ( ) ( ) N/A N/A SFA232-5 ( ) ( ) ( ) ( ) PA PA T All ( ) ( ) N/A N/A N/A N/A N/A N/A PA T (III and IV) All ( ) 60-3C 60-3C ( ) N/A N/A N/A N/A PA All ( ) PA-39 All ( ) N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A ( ) PA-42 PA PA All ( ) 60-3A ( ) N/A N/A ( ) PA , PA T All ( ) 60-3A ( ) SFA232-5 ( ) ( ) N/A N/A PA P All ( ) 60-3C 60-3C ( ) ( ) N/A N/A N/A N/A & on N/A N/A N/A N/A ( ) PA P All ( ) 60-3C 60-3C ( ) N/A N/A N/A N/A & on N/A N/A N/A N/A ( ) Note: Manufacturer Code Numbers shown in Parenthesis ( ). 1-36

47 Introduction Kit Directory Conversion Kit - STOP - SOME CONVERSION KITS SUPPORT NUMEROUS MODELS OF AIRCRAFT TOGETHER WITH THE VARIOUS MOUNTING AND ROUTING CONFIGURATIONS OF EQUIPMENT BEING REPLACED. THEREFORE, SOME KITS WILL NOT INCLUDE THE HARDWARE NEEDED TO COMPLETE THE INSTALLATION. THIS HARDWARE MUST BE PURCHASED SEPARATELY. 2 Note! Unless otherwise noted, listed Wheels and Brakes are FAA TSO C26 Approved. For a product to be TSO qualified, it has to have successfully demonstrated its ability to meet minimum performance standards in accordance with FAA recognized rating methods. The TSO approval of a product does not constitute installation approval or applicability on an FAA Type Certificated Aircraft. It is the responsibility of those installing these products to determine that the aircraft installation and its wheel and brake performance requirements are compatible for the TSO ratings of the wheel and brake. TSO approved products must have separate approval for installation in a FAA type certificated aircraft. TSO Approved Products may be installed only if performed under Title 14 CFR Part 43 or the applicable airworthiness requirements. Prior to installing kits, please verify that the wheel and brake assembly numbers as listed match the model numbers as indicated on the nameplates. For quick reference, disc and lining part numbers are listed in the directory. Manufacturers and aircraft are listed alphabetically with models listed numerically. For other replacement parts on your assemblies, turn to the numerical assembly listing for a particular parts breakdown. Actions affecting a particular kit will be noted below each applicability data table. Always check for additional information such as superseding equipment, applicable upgrades and other pertinent information in the numerical assembly listing parts breakdown. For technical assistance, contact the TECHNICAL SERVICES HOTLINE: clevelandwbhelp@parker.com Fax: BRAKING ( ) 2-1

48 Notes 2-2

49 Applicability Data Kit Directory Conversion Kit Single Engine Model/ Name Kit Number Tire Size Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Type Aero Commander Lark A F O Installation per FAA STC SA1635GL. Ayres S-2R (Thrush) A 29 x N/A A O Replaces surplus 27 W & B. Installation per FAA STC SA162GL. Use Automotive Brake Fluid only. Kit also includes hydraulic hoses and mounting hardware. 2 Cessna 120, 140 (S/N 8004 thru 13399), 120, 140, 140A (S/N & up), 170, 170A, 170B, 172, 172A thru 172E, 175, 175A, 175B, 175C, P172D, 180, 180A thru 180F, 182, 182A thru 182G. 180, 180A thru 180H, 180J, 180K, 185, 185A thru 185E, A185E, A185F, 206, P206, U206, U206F, U206G, TU206E, TU206F, TU206G (1) A A O Converts Goodyear to Cleveland; Cannot be used with crosswind landing gear. Installation per FAA STC SA13GL (1) D N O The kit is not a replacement for McCauley. The kit may not work with wheel pants due to the wider offset of brake disc A (1) T N O These kits to be used only with Cessna Axle P/N and Not for use on aircraft equipped with crosswind landing gear. Installation per FAA STC SA63GL. 180, 180A thru 180F, 180H, 180J, 185, 185A, 185B, A185E, A185F, 206E, 206F, TU206E, TU206F, 210, 210A, 210B, 210C, 210K, 210L, 210M, T210C, T210K, T210L, T210M (1) x B O This kit is to be used only with Cessna Axles P/N and Not for use on aircraft equipped with crosswind landing gear. Installation per FAA STC SA52GL and SA62GL. P210N (S/N P thru P ) A (1) B U O Installation per FAA STC SA52GL. 190, 195, 195A, 195B C N/A 30-28C M (1) Also available with chrome plated brake discs. To order, specify kit number followed by CHROME. This kit is not for use on aircraft equipped with crosswind landing gear. Installation per FAA STC SA54GL. Kit also includes hydraulic hoses. 2-3

50 Applicability Data Kit Directory Conversion Kit Single Engine Model/ Name Kit Number Tire Size Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Type dehavilland Chipmunk DHC-1-21, -22, -22A DHC-1B-2-S3, -S (1) D P O Installation per FAA STC SA748S0, SA1011S0. Kit also includes axle spacers and mounting hardware. Beaver DHC-2 Mk.I, Mk II, Mk. III N/A M (1) Also available with chrome plated brake discs. To order, specify kit number followed by CHROME. Installation per FAA STC SA1402GL or Canadian STA SA90-1. Kit also includes brake inlet fitting and mounting hardware. Ercoupe E, G, 415-C, 415-D & 415-CD (S/N 813 & up) ERCO FORNEY F-1, F-1A N/A O Installation per FAA STC SA120GL, SA127GL. Globe Swift GC1A, GC1B (1) C B O Installation per FAA STC SA2GL. Kit also includes axle spacers. (1) Also available with chrome plated brake discs. To order, specify kit number followed by CHROME. Hawker Beechcraft Corporation A-23,19, 19A, M19A, B19 (S/N MB-1 thru MB-521), 23, A23, A23A, B23, C23 (S/N M-2 thru M1361), A23-24, A24 (S/N MA-1 thru MA-268), A24R (S/N MC-2 thru MC-97) 35, A35, B35, C35, D35, E35, F35, G35, 35R, 35-33, 35-A33, 35-B33, 35-C33, 35-C33A, E33A, F33, F33A, F33C, G33, H35, J35, K35, M35, N35, P35, S35, V35, V35A, V35B, A (1) C B O (1) Installation per FAA STC SA718GL. Kit also includes axle spacers and washers, and mounting hardware O Installation per FAA STC SA11GL. Kit also includes axle spacers, mounting hardware, hydraulic hoses, and bulkhead fittings. 35, A35, B35, C35, D35, E35, F35, G35, 35R, H35, J35, K35, M35, N35, P35, S35, 45(TY-34), A45 (T-34A, B-45), D45 (T-34B) N/A M Installation per FAA STC SA19GL. (Also applicable to Beech Baron-Twin Engine). Kit also includes axle spacers, mounting hardware, hydraulic hoses, and bulkhead fittings. (1) Also available with chrome plated brake discs. To order, specify kit number followed by CHROME. 2-4

51 Applicability Data Kit Directory Conversion Kit Single Engine Model/ Name Kit Number Tire Size Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Type Navion A, B, D, E, F, G, H (main) (nose) 40-98D (main) 40-76B (nose) N/A 30-66B O Main and Nose wheel. Installation per FAA STC SA36GL. Kit also includes NLG and MLG axle spacers, dust shield and hardware, and hydraulic hoses. A, B, D, E, F, G, H A D N/A 30-66B O Mains only. Installation per FAA STC SA46GL. Kit also includes axle spacers, dust shield and hardware, and hydraulic hoses. 2 Pilatus PC-12, PC-12/45, PC-12/47, PC-12/47E (1) (rotor disc) N/A (1) (wear pad) Installation per FAA STC SA01376CH, EASA STC , and ANAC STC 2011S (1) Internal wheel & brake design. Piper PA22-125, PA22-135, PA22-150, PA N/A O This kit available only from Univair Aircraft Corporation. Installation per Univair STC SA91AL. Stinson 108 Series (1) D Q O (1) Also available with chrome plated brake disc. To order, specify kit number, followed by CHROME. This kit available only from Univair Aircraft Corporation. Installation per Univair TC approval. Kit also includes mounting hardware and hydraulic hoses. Univair Aircraft Corporation Refer to the Univair Aircraft Aircraft Corporation Master Eligibility List N/A 30-41B O This wheel and brake kit has been pre-packaged for Univair Aircraft Corporation by Parker Hannifin, Aircraft Wheel and Brake. Aircraft eligibility is the sole responsibility of Univair Aircraft Corporation. Parker Hannifin, Aircraft Wheel and Brake assumes no responsibility for the application of this equipment. 2-5

52 Applicability Data Kit Directory Conversion Kit Twin Engine Model/ Name Kit Number Tire Size Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Type Cessna 310, 310A thru 310H, E310H, 310I, 310J, 310J-1, E310J, 310K, 310L, 310N, 310P, T310P, 310Q, T310Q, 310R, T310R, 320, 320-1, 320A, 320B, 320C, 320D, 320E, 320F 340, 340A, 401, 401A, 401B, 402, 402A, 402B, 411, 411A, , 340A, 401, 401A, 401B, 402, 402A, 402B, 402C, 411, 411A, 414, 414A, 421, 421A, 421B, 421C B N/A 30-28D M Installation per FAA STC SA110GL, SA111GL N/A M Upgrades existing Cleveland wheel & brake 40-40A/30-28B to heavy duty / Installation per FAA STC SA167GL, SA281GL. Kit also includes axle spacers and hydraulic fittings A N/A M Installation per FAA STC SA197GL, SA664GL. Kit also includes axle spacers and hydraulic fittings x N/A M Installation per FAA STC SA781GL. Kit also includes mating hardware x N/A M Installation per FAA STC SA644GL. Kit also includes master cylinder assemblies and axle mounting hardware. 500, 501, 550, 551, S x (nose) Nose Wheel conversion kit. Installation per FAA STC SA882GL, SA883GL. 500, 501, 550, x (1) (rotor disc) N/A A (1) (wear pad) For aircraft with power assist brakes only. Installation per FAA STC SA1297GL, SA1298GL. Kit also includes hydraulic expander fittings. (1) Internal wheel & brake design. S x (1) (rotor disc) N/A A (1) (wear pad) Installation per FAA STC SA1441GL. Kit also includes axle spacers, washers and hydraulic hoses. (1) Internal wheel & brake design. dehavilland Twin Otter DHC-6-1, -100, -200, N/A M Installation per FAA STC SA1065GL. Kit also includes axle spacer, mounting hardware, and hydraulic inlet hose. Embraer EMB-110 P1, EMB-110 P (nose) Nose Wheel conversion kit. Installation per FAA STC SA814GL. 2-6

53 Applicability Data Kit Directory Conversion Kit Twin Engine Model/ Name Kit Number Tire Size Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Type Grumman G21, G21A x N/A O Installation per FAA STC SA99GL. Widgeon G44, G44A, Scan Type N/A Installation per FAA STC SA121EA. O 2 Mallard G-73 and Turbo Conversions x 8.8, N/A O Installation per FAA STC SA651GL. Kit also includes mounting hardware. Hawker Beechcraft Corporation D18C, D18S, E18S, E18S-9700, G18S, H18, C45G, TC-45G, RC-45J, C-45H, TC-45H, TC-45J, JRB-6, 3N, 3NM, 3TM or 10 ply N/A B M Applicable to Tricycle landing gear with 10 main wheel & brake. Installation per FAA STC SA788GL. Kit also includes mounting hardware and aluminum fillers for gear door modification (tail) Converts Tail Wheel to Type III. Installation per FAA STC SA829GL. Kit also includes axle spacer N/A M Applicable to aircraft equipped with 12 main wheel & brake. Installation per FAA STC SA1222GL. Kit also includes mounting hardware, axle spacers, hydraulic hoses, and shuttle valve relocation hardware. D55,D55A, E55, E55A, 95, B95, B95A, D95A, E95, 95-55, 95-A55, 95-B55, 95-B55A, 95-B55B, 95-C55, 95-C55A D55, D55A, E55, E55A, 58, 58A, 95, B95, B95A, D95A, E95, 95-55, 95A-55, 95-B55, 95-B55A, 95-B55B, 95-C55, 95-C55A 50, B50, C50, D50, D50A, D50B, D50C, D50E, E50, F50, G50, H50, J N/A M Uses 2 piston brake. Installation per FAA STC SA19GL. (Also applicable to Beech Bonanza - Single Engine). Kit also includes axle spacers, mounting hardware, hydraulic hoses, and bulkhead fittings x D N/A 30-93C M Uses 3 piston brake. Installation per FAA STC SA912GL. Kit also includes mounting hardware and hydraulic fittings A N/A M Applicable only to models modified per Excalibur STC SA75SW. Installation per FAA STC SA390GL. Kit also includes mounting hardware and hydraulic fittings. 58P, 58TC, 60, A60, B x N/A M Installation per FAA STC SA178GL, SA179GL. Kit also includes axle spacers, hydraulic hoses, and hydraulic fittings. 2-7

54 Applicability Data Kit Directory Conversion Kit Twin Engine Model/ Name Kit Number Tire Size Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Type Hawker Beechcraft Corporation (continued) 65, A65, 70, 65-80, 65-A80, 65-B80, B N/A A M Installation per FAA STC SA673GL. Kit also includes mounting hardware, bearing washer, brackets and fillers for wheel well modification, and hubcaps , 65-A90, 65-A90-1 (JU-21A), 65-A90-4 (RU-21E, RU-21H), B90, C90, C90A, C90GT, C90GTi, E90, H90 (T-44A), A N/A M STC applicability: FAA STC SA619GL (all models); Brazilian STC (all models). EASA STC (all models); Australian STC F88/865 (models: 90, A90, B90, C90, E90). Kit also includes mounting hardware, bearing washer, brackets and fillers for wheel well modification, and hubcaps. F90, 99, 99A, A99A, B99, C99, 100, A100, B100, 200, 200C, 200CT, 200T, A200, A200C, A200CT, B200, B200C, B200CT, B200T, B200GT, B200CGT x N/A For aircraft equipped with standard landing gear. STC applicability: FAA STC SA646GL, SA650GL, SA890GL (all models). French STC 231 (models: 99A, B99, 100, A100, 200, 200C, 200T, B200, B200C). German STC 0618/2047 (models: 200, 200C, B200, B200C, B200T). Kit also includes hydraulic hoses. M Hot Air Manifold Kit for aircraft equipped with brake deice. Installation only in conjunction with Kit F90, 99, 99A, A99A, B99, C99, 100, A100, B100, 200, 200C, 200CT, 200T, B200, B200C, B200T, B200CT, B200GT, B200CGT 65, A65, 65-80, 65-A80, 65-B80, 65-88, 65-90, 65-A90, 70, B90, C90, C90A, C90GT, C90GTi, E90, F90, H90 (T-44A), 99, A99, A99A, B99, C99, 100, A100, B100, 200, 200C, 200CT, 200T, B200, B200C, B200T, B200CT, B200GT, B200CGT, 300, B300, B300C x N/A (1) (wear pad) For aircraft equipped with High Flotation Landing Gear. STC applicability: FAA STC SA757GL, SA1509GL, SA1510GL (all models). Australian STC F88/514 (model 200). French STC 231 (models: 200, B200). Kit also includes mounting hardware, axle spacer, swivel kit replacement O-rings, and brake de-ice bracket. (1) Internal wheel & brake design x (nose) Nose wheel conversion kit. STC applicability: FAA STC SA757GL, SA1061GL, SA1077GL, SA1242GL, SA380CH (all models). Australian STC F88/514 (model 200). German STC 0616/2021 (models: 65, 65-80, 65-A80, 65-88, 65-90, 65-A90, B90, C90, E90). M 1900C, 1900D x A (1) (rotor disc) N/A (1) (wear pad) Installation per FAA STC SA1789GL. Inactive, superseded by Kit. (1) Internal wheel & brake design x A (1) (rotor disc) N/A A (1) (wear pad) Installation per FAA STC SA1789GL. Kit also includes mounting hardware, swivel kit replacement O-rings, brake de-ice manifold kit (1) Internal wheel & brake design x (nose) Nose wheel conversion kit. Installation per FAA STC SA02204CH Brake De-ice manifold kit. Installation only in conjunction with kit or A. For aircraft equipped with Beech de-ice manifold P/N Kits required per arcraft. 2-8

55 Applicability Data Kit Directory Conversion Kit Twin Engine Model/ Name Kit Number Tire Size Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Type Hawker Beechcraft Corporation (continued) 1900D A x B (1) (rotor disc) N/A A (1) (wear pad) For aircraft equipped with anti-skid. Installation per FAA STC SA1789GL. Kit also includes mounting hardware, swivel kit replacement O-rings, axle nut hardware, and brake de-ice manifold kit (1) Internal wheel & brake design. 1900C Brake De-ice manifold support kit. Installation only in conjunction with kit For aircraft with Beech de-ice manifold P/N kits required per aircraft. Learjet 24, 24A, 24B, 24B-A, 24C, 24D, 24D-A, 24E, 24F, 24F-A, 25, 25A, 25B, 25C, 25D, 25F, 35, 35A, 36, 36A, x (nose) Nose Wheel Conversion Kit. Installation per FAA STC SA1459GL. Mitsubishi MU-2B, MU-2B-10, -15, -20, -25, -26, -26A, -30, -35, -36, -36A, -40, -60 MU-2B-20, -25, -26, -26A, -35, -36, -36A, -40, N/A M Installation per FAA STC SA648GL, SA652GL or Canadian STA SA Kit also includes mounting hardware and hydraulic hoses and hardware Upgrades existing Nose Wheel to 40-87F. Provides improved bearing seals. Installation per STC SA684GL, SA685GL. Kit also includes axle spacers. Piper Aztec Series (1) N/A M Upgrades existing Cleveland wheels and brakes to / Installation per ESB PA-31T, PA-31T (1) N/A M Installation per Piper service kit # Kit also includes mounting hardware. PA , PA , PA (1) N/A 30-95A M Upgrades aircraft from standard Cleveland 3-piston /30-68 series to 4-piston /30-95A. Installation per service kit # PA-31P (425 HP), PA N/A M For aircraft with 1 5/8 axle. Installation per FAA STC SA284GL, SA295GL. PA-31, PA , PA , PA N/A M For aircraft with 1 1/2 axle. Installation per FAA STC SA563GL. PA-31T (2) N/A M Installation per FAA STC SA599GL. Kit also includes mounting hardware, hydraulic hoses and fittings, aluminum hydraulic tubing, and fittings. PA-42, PA N/A M Installation per FAA STC SA600GL. Kit also includes mounting hardware and hydraulic fittings. NOTE: Use only with original equipment tires - Goodrich (Piper P/N ) or McCreary (Piper P/N ). (1) Order from airframe manufacturer only. (2) SB Service Bulletin Kit, for replacement of landing gear emergency extension air line. STC approved per SB

56 Applicability Data Kit Directory Conversion Kit Twin Engine Model/ Name Kit Number Tire Size Main Wheel Assembly Standard Disc Chrome Disc Brake Assembly Lining Type Schafer Aircraft Modifications Inc. Piper Model PA modified by Schafer STC SA4678SW. (1) (1) Design sold to EMBRAER - to become EMB 820, N N/A M Installation per FAA STC SA721GL. Kit also includes hydraulic hoses and fittings. Shorts Brothers Ltd. SD3-30, SD3-60, SD3 Sherpa, SD3-60 Sherpa (nose) Nose Wheel Conversion Kit. Installation per FAA STC SA910GL or Canadian STA SA Swearingen Aircraft Merlin SA26-T, -AT N/A A M Twin Commander Aircraft Corp. (1) Installation per FAA STC SA1009GL. Kit also includes mounting hardware, axle washer, and hubcap. 500, 500A, 500B, 500S, 500U N/A B M STC applicability: FAA STC SA706GL (models: 500, 500A, 500B, 500S, 500U). Brazialian STC 2012S08-20 (models: 500, 500B, 500S, 500U). Kit also includes mounting hardware A N/A C M For aircraft using Skydrol brake fluid. STC applicability: FAA STC SA706GL (models: 500, 500A, 500B, 500S, 500U). Brazialian STC 2012S08-20 (models: 500, 500B, 500S, 500U). Kit also includes mounting hardware. 560F, 680F, 680FL, 680FL(P), 680T, 680V, 680W, 681, 685, 690, 690A, 690B, 690C, 690D, 695, 695A, 695B A N/A E M Installation per FAA STC SA497GL. Kit also includes mounting hardware A A N/A D M For aircraft using Skydrol brake fluid. Installation per FAA STC SA497GL. Kit also includes mounting hardware. 500, 500A, 500B, 500S, 500U, 560A, 560E (nose) Nose Wheel conversion kit. Installation per FAA STC SA1457GL. 560F, 680, 680E, 680FL, 680FL(P), 680F, 680V, 680W, 681, 685, 690, 680W, 681, 685, 690, 690A, 690B, 690C, 690D, 695, 695A, 695B, (nose) Nose Wheel conversion kit. Installation per FAA STC SA1458GL. (1) Formerly Gulfstream Aerospace. 2-10

57 Applicability Data Kit Directory Experimental Aircraft Aircraft Make and Model Kit Number Main Wheel Assembly Main Brake Assembly Nose Wheel Assembly Master Cylinder Assembly Parking Brake Valve Aircraft Designs Stallion B J Seal Kit American Homebuilts John Doe STOL C 40-59A 30-59A Kit also includes dust shields C X 30-75X Kit also includes dust shields. Aviation Maintenance Limited (1) Stearman A Seal Kit (1) Formerly Redline Aviation. D and J Harmon Harmon Rocket Kit also includes dust shields. D.F.L. Holdings Tango Kit also includes dust shields Seal Kit Seal Kit Dean Wilson Whitney Boomerang B Kit also includes dust shields B Seal Kit Seal Kit 40-77G Epic LT (1) (1) (1) Internal wheel & brake design. If your make & model aircraft is not on the aplicability chart, please contact the Cleveland Technical Hotline at (800) for help. Most of the kits are available with chrome brake discs. For a 5-inch dust shield order For a 6-inch dust shield order a WARNING! The user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. 2-11

58 Applicability Data Kit Directory Experimental Aircraft Aircraft Make and Model Kit Number Main Wheel Assembly Main Brake Assembly Nose Wheel Assembly Master Cylinder Assembly Parking Brake Valve Explorer Aeronautique Private Explorer Standard D 30-52N A Seal Kit Private Explorer Float Equipped B Express Aircraft CT, S90, Express 2000 / 2000RG B Seal Kit Four Winds Aircraft 192 / 210 / 250T B G 10-19J Seal Kit Hensley Aircraft F-19 Wolf Aerobatic A 30-63A Kit also includes torque plate bushings. F-19 Wolf Utility D 30-52N Lancair Evolution H Lancair IV Standard E 30-61E J Seal Kit Lancair IV High Energy J Seal Kit Lancair IV High Energy Upgrade A Legacy FG / RG Kit also includes dust shields Legacy Kit also includes dust shields J Seal Kit Murphy Manufacturing Rebel, SR2500 Super Rebel, Maverick Renegade Spirit, Elite A If your make & model aircraft is not on the aplicability chart, please contact the Cleveland Technical Hotline at (800) for help. Most of the kits are available with chrome brake discs. For a 5-inch dust shield order For a 6-inch dust shield order a WARNING! The user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. 2-12

59 Applicability Data Kit Directory Experimental Aircraft Aircraft Make and Model Kit Number Main Wheel Assembly Main Brake Assembly Nose Wheel Assembly Master Cylinder Assembly Parking Brake Valve New Glasair GlaStar, Glasair Super II FT, Glasair III and Super III Contact New Glassair for applicability Pacific Aerosystems Sky Aero B Kit also includes dust shields. F A 40-75B 30-52U Performance Aircraft Legend E 30-61E Pitts S1-C, S1-S (Pitts Special) B Kit also includes dust shields J 30-9C Kit also includes dust shields Seal Kit Rans S-7C A 30-59A Kit also includes dust shields Seal Kit S B Kit also includes dust shields. SkyStar Aircraft Kit Fox Pulsar B Kit also includes dust shields Seal Kit If your make & model aircraft is not on the aplicability chart, please contact the Cleveland Technical Hotline at (800) for help. Most of the kits are available with chrome brake discs. For a 5-inch dust shield order For a 6-inch dust shield order a WARNING! The user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. 2-13

60 Applicability Data Kit Directory Experimental Aircraft Aircraft Make and Model Kit Number Main Wheel Assembly Main Brake Assembly Nose Wheel Assembly Master Cylinder Assembly Parking Brake Valve Steen Aero Lab Skybolt A 30-59A Kit also includes dust shields Seal Kit H Seal Kit X 30-75X Kit also includes dust shields Seal Kit H Seal Kit Stop Starduster V-Star SA-900, Starlet SA-500, Starduster Too SA-300, Acroduster Too SA-750, SA100 Starduster One, SA101 Super Starduster, SA-500 Starlet, SA-900 V-Star, SA101 Super Starduster J 30-9C Kit also includes dust shields Seal Kit A 30-59A Kit also includes dust shields Seal Kit Ultravia Aero Int l Pelican PL912/ B Kit also includes dust shields C Seal Kit Vans Aircraft RV-3 thru RV B Kit also includes dust shields C Seal Kit RV A 30-59A Kit also includes dust shields C Seal Kit Velocity Aircraft SE / XL B If your make & model aircraft is not on the aplicability chart, please contact the Cleveland Technical Hotline at (800) for help. Most of the kits are available with chrome brake discs. For a 5-inch dust shield order For a 6-inch dust shield order a WARNING! The user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. 2-14

61 Applicability Data Kit Directory Experimental Aircraft Aircraft Make and Model Kit Number Main Wheel Assembly Main Brake Assembly Nose Wheel Assembly Master Cylinder Assembly Parking Brake Valve Wag-Aero Sport Trainer, Observer, Acro Trainer, Acro Sport I & II, Wag-a-bond Classic, Super Sport, Wag-a-bond Traveler, Sportsman 2+2, Wag-a-bond B Kit also includes dust shields J 30-9C Kit also includes dust shields A 30-59A Kit also includes dust shields X 30-75X Kit also includes dust shields Seal Kit Seal Kit 2 7ECA, 7GCAA, 7GCBC, 7KCAB Seal Kit aca, 7eac, 7gcaa, 7gcbc, 7kcab, 8kcab, 8GCBC, 7AC, 7EC, 7FC, 7GC, 7GCA, 7HC, 7GCB & 7GCBA Exclusive to Wag Aero (Safe Air) who holds the STC Seal Kit Zenair 6.00 x 6: CH200, 250, 300 (Tri-Z), Zipper, Cricket MC-15, Stol CH B Kit also includes dust shields A C Seal Kit Seal Kit Seal Kit 5.00 x 5: CH-100 (Mono-Z), CH-150, 180, Zodiac CH Seal Kit If your make & model aircraft is not on the aplicability chart, please contact the Cleveland Technical Hotline at (800) for help. Most of the kits are available with chrome brake discs. For a 5-inch dust shield order For a 6-inch dust shield order a WARNING! The user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. 2-15

62 Applicability Data Kit Directory Wheel & Brake Ship Set Description Order Code Number Tire Size Wheel Assy Standard Disc Chrome Disc Brake Assy Lining Type Comments Kit Built/Experimental and General Usage Heavy Duty Upgrade Kit (4) Magnesium wheel N/A A O P/N Aluminum brake (3) Kit Built/Experimental (2) Standard Energy Brake P/N B (4) (4) O Magnesium wheel/brake (3) Kit Built/Experimental (1)(2) 40-78B CHROME P/N CHROME Standard Energy Brake O Magnesium wheel/brake (3) Kit Built/Experimental (2) 1-1/4 Axle P/N J C O Aluminum wheel/brake (3) Kit Built/Experimental (1)(2) 40-78A CHROME P/N CHROME 1-1/4 Axle C O Aluminum wheel/brake (3) Kit Built/Experimental (2) 1-1/2 Axle P/N A A O Magnesium wheel/brake (3) Kit Built/Experimental (1)(2) 40-59A CHROME P/N CHROME 1-1/2 Axle A O Magnesium wheel/brake (3) Kit Built/Experimental (2) 1-1/2 Axle P/N X X O Aluminum wheel/brake (3) Kit Built/Experimental (1)(2) X CHROME P/N CHROME 1-1/2 Axle X O Aluminum wheel/brake (3) Kit Built/Experimental (2) High Energy Brake P/N N/A O Magnesium wheel/brake (3) Kit Built/Experimental (2) High Energy Brake P/N A A N/A O Aluminum wheel/brake (3) Kit Built/Experimental (2) Increased Energy Brake P/N N/A A O Magnesium wheel/brake (3) General Usage (6) O Aluminum wheel/brake (3) General Usage (6) A O Aluminum wheel/brake (3) General Usage (1)(6) O Aluminum wheel/brake (3) General Usage (1)(6) A O Aluminum wheel/brake (3) Kit Built/Experimental (2)(6) N/A M Magnesium wheel/brake (3) Kit Built/Experimental 1-1/4 Axle (2)(6) N/A O Magnesium wheel/brake (3) Kit Built/Experimental (2)(6) N/A B O Magnesium wheel/brake (3) Kit Built/Experimental 1-1/2 Axle (5)(7) B O Aluminum wheel/brake (3) General Usage (6) 14.5 x N/A N/A M Aluminum wheel/brake (3) (1) Wheels are equipped with chrome plated brake discs. (2) For detail design/rating information, refer to Cleveland drawing 50-76, general arrangement - Wheels & Brakes, 5 & 6. (3) Wheels and Brakes are FAA TSO C26 Approved. NOTE! For a product to be TSO qualified, it has to have successfully demonstrated its ability to meet minimum performance standards in accordance with FAA recognized rating methods. The TSO approval of a product does not constitute installation approval or applicability on an FAA Type Certificated Aircraft. It is the responsibility of those installing these products to determine that the aircraft installation and its wheel and brake performance requirements are compatible for the TSO ratings of the wheel and brake. TSO approved products must have separate approval for installation in a FAA type certificated aircraft. TSO Approved Products may be installed only if performed under Title 14 CFR Part 43 or the applicable airworthiness requirements. (4) Wheel & Brake Upgrade Kit converts wheel and brake to Heavy Duty. (5) The Cleveland Wheels & Brakes as listed are FAA TSO C26 approved, quantity are furnished in pairs for replacement of existing equipment or initial installation on an experimental non FAA Type Certificated Aircraft. This ship set of parts also includes a spare set of brake linings, rivets and a Rebate Coupon (for when both linings and discs need to be replaced). See AWBCMM0001 Component Maintenance Manual for guidance of when and how to replace worn linings and discs. (6) Be advised that the Order Code Number is used to identify a grouping of a pre-packaged ship set of TSO Approved wheels and brakes for customer ordering and shipping convenience. At time of installation of parts contained within, the installer is to refer only to the Part Number of each listed wheel and brake assembly to indicate what parts have been installed on the aircraft. Do not refer to the order code number for installation purposes, as it is not an FAA recognized part number. (7) Be advised that the Order Code Number is used to identify a grouping of a pre-packaged ship set of TSO Approved wheels and brakes along with TSO Approved spare parts for customer ordering and shipping convenience. At time of installation of parts contained within, the installer is to refer only to the Part Number of each listed wheel and brake assembly to indicate what parts have been installed on the aircraft. Do not refer to the order code number for installation purposes, as it is not an FAA recognized part number. 2-16

63 Part Number Index Master Cylinder All SECTION , B, C, E , , A, B, D, F, G, H, J, , A, , A , A, B , A, C, F, C, D, , A, B, C D, , , , , , , , , , , , , A, , A, B, D, E, F, , A, B, , , A, B , A , , , , Avon, Ohio, OH USA

64 Notes 3-2

65 Design Information Master Cylinder All Bore (inch) Stroke (inch) Displ. (cu. inch) Cleveland P/N Installed Length (inch) Type Port Size Wt. (lbs) Comments Push 1/8-27 N.P.T..58 Ports in-line, no fittings, extruded aluminum body. Upgrade to 10-30D per SB A 8.41 Push 1/8-27 N.P.T..58 Same as 10-30, but uses rod end clevis B 7.50 Push 1/8-27 N.P.T..58 Obsolete design, superseded by 10-30D per SB C 6.81 Push 1/8-27 N.P.T..73 Uses a custom mount with pivot pins on the side of the housing, adjacent to the inlet fitting D Push 1/8-27 N.P.T..58 Upgrades Supersedes 10-30B B 8.37 Push 7/ Without parking valve, ports 180 apart, fitting C 8.37 Push 7/ With parking valve, ports 180 apart, fitting 45 and E 8.37 Push 7/ With parking valve, ports 180 apart, fitting Push Outlet, 7/16-20 Inlet, 1/8-27 N.P.T..63 With parking valve, ports 90 apart, fitting (1) 8.35 Push 7/ Ports in-line, fittings 90, extruded aluminum body. See note D (1) 8.35 Push 1/8-27 N.P.T..53 Ports in-line, no fittings, extruded aluminum body. See note F (1) 8.35 Push Outlet, 7/16-20 Inlet, 1/8-27 N.P.T..55 Ports in-line, straight fitting, extruded aluminum body. See note G (1) 8.01 Push 1/8-27 N.P.T..53 Ports in-line, no fittings, extruded aluminum body. See note H (1) 8.36 Push 1/8-27 N.P.T..58 Ports in-line, fittings 90, extruded aluminum body. See note J (1) 8.33 Push 1/8-27 N.P.T..53 Ports in-line, no fittings, extruded aluminum body. See note Push 1/8-27 N.P.T..52 Ports in-line, no fittings, no rod clevis, extruded aluminum body A 7.37 Push 1/8-27 N.P.T..52 Ports in-line, no fittings, no rod clevis, extruded aluminum body Push 7/ Reservoir - capacity: 3.0 cu. in. Bell P/N Push 1/8-27 N.P.T..59 Reservoir - capacity: 3.41 cu. in., mounting hole:.190 Dia Push 1/8-27 N.P.T..59 Reservoir - capacity: 3.41 cu.in., mounting hole:.250 Dia Push 1/8-27 N.P.T..59 Reservoir - capacity: 3.0 cu.in Push 1/8-27 N.P.T..60 Reservoir - capacity: 3.0 cu.in Push 1/8-27 N.P.T..52 Reservoir - capacity: 3.0 cu. in., mounting hole:.190 Dia Push 1/8-27 N.P.T..48 Ports in-line, no fittings Push 1/8-27 N.P.T..60 Ports in-line, no fittings. 3-3

66 Design Information Master Cylinder All Bore (inch) Stroke (inch) Displ. (cu. inch) Cleveland P/N Installed Length (inch) Type Port Size Wt. (lbs) Push 1/8-27 N.P.T..53 Beech P/N A 7.90 Push 1/8-27 N.P.T..50 Ports in-line, no fittings. Comments B 7.68 Push 1/8-27 N.P.T..46 Ports in-line, no fittings D 8.28 Push 1/8-27 N.P.T..48 Obsolete design, superseded by 10-58E E 8.28 Push 7/ Supersedes 10-58D F 8.28 Push 7/ Upgrade from 10-58E per SB Push 3/8-24 Piper P/N F Push 1/8-27 N.P.T..42 Ports in-line, no fittings Push 1/8-27 N.P.T..45 Ports in-line, no fittings Push 1/8-27 N.P.T..45 Beech P/N A 7.37 Push 1/8-27 N.P.T..45 Same as 10-54, except for shorter installed length Push 7/ Reservoir - capacity: 3.41 cu. in., mounting hole:.250 &.190 Dia Push 7/ Beech P/N A 7.37 Push 7/ Beech P/N B 7.50 Push 7/ Ports in-line, no fittings D 8.41 Push 1/8-27 N.P.T..53 Same as 10-24C, except body mounts are rotated Push 1/8-27 N.P.T..50 Ports in-line, no fittings Push 1/8-27 N.P.T. Ports in-line, no fittings B 7.26 Push Outlet, 7/16-20 Inlet, 1/8-27 N.P.T..50 Ports 180 apart Push 1/8-27 N.P.T Reservoir - capacity: 2.88 cu. in., with parking lever A Push 1/8-27 N.P.T..98 Reservoir - capacity: 2.88 cu. in., no parking brake Push 1/8-27 N.P.T..50 Inlet - 90,.250 Dia. hole A 7.20 Push 1/8-27 N.P.T..50 No fittings C 8.20 Push 1/8-27 N.P.T..53 Ports in-line, no fittings, extruded aluminum body Push 7/ Reservoir - capacity: 2.15 cu. in., Bell P/N

67 Design Information Master Cylinder All Bore (inch) Stroke (inch) Displ. (cu. inch) Cleveland P/N Installed Length (inch) Type Port Size Wt. (lbs) Comments Push 7/ Bell P/N Push 7/ male ports A Push 7/ male ports B Push 7/ male ports Push 7/ Reservoir - capacity: 3.41 cu. in (2) 5.25 Pull 7/ Ports in-line, no fittings, extruded aluminum body. See note Push 7/ Bell P/N Pull 7/ Piper P/N Pull 7/ No fittings A 5.21 Pull 7/ Same as 10-23, except with extruded aluminum body C 5.25 Pull 7/ Extruded aluminum body F 6.25 Pull 7/ Equipped with high strength clevis Push 3/8-24 Ports in-line, no fittings, extruded aluminum body Push M10 x 1 (metric).32 Flange mount Pull 7/ Large bore version of series A 6.25 Pull 7/ Equipped with high strength clevis. Notes: (1) The Series master cylinders have been redesigned from a steel body configuration to an extruded aluminum configuration. Listed Design Information is for the extruded aluminum body master cylinder. Design Information for the steel body master cylinder is the same except for the following: Stoke = 1.25 inches Displacement =.31 cubic inches Weight =.50 lbs. (2) The master cylinder has been redesigned from a steel body configuration to an extruded aluminum configuration. Listed Design Information is for the extruded aluminum body master cylinder. Design Information for the steel body master cylinder is the same except for the following: Stoke = 1.25 inches Displacement =.75 cubic inches Weight =.70 lbs. 3-5

68 Master Cylinder Push Type 10-19, 10-19A, 10-19B, 10-19D, 10-19F, 10-19G, 10-19H, 10-19J, 10-20, 10-20A, 10-22, 10-22A, 10-22B NOTE: Parts list for reference only. Contact airframe manufacturer to order master cylinders and components listed. PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Body (3) Cylinder Body (4) (2) Cylinder Assembly A (1) Cylinder Body Cylinder Body B (1) 1A Cylinder Assembly 1 1B Cylinder Assembly 1 1C Cylinder Body 1 (Continued on next page) 10-19D 10-19F 10-19G 10-19H 10-19J A A 10-22B 3-6

69 Master Cylinder Push Type 10-19, 10-19A, 10-19B, 10-19D, 10-19F, 10-19G, 10-19H, 10-19J, 10-20, 10-20A, 10-22, 10-22A, 10-22B (Continued from previous page) PER ASSY. FIG. PART NO. DESCRIPTION Piston Rod Assembly A (1) 10-19B (1) Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly Rod-Piston Rod-Piston Rod-Piston Rod-Piston End Gland A End Gland O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) Washer-Seal Piston A Piston O-Ring-Piston (MS ) A O-Ring-Piston (MS ) Spring-Piston Bushing Snap Ring Spring-Return Washer (AN L) Washer (AN ) Roll-Pin Nut-Check (AN316-4) Clevis A Clevis Snap Ring Tube Fitting (AN816-4D) Tube Fitting (MS D) Tube Fitting (MS D) Fitting O-Ring D 10-19F 10-19G 10-19H 10-19J A A 10-22B Repair Kit (5, 8, 10, 10A) Repair Kit (5, 6, 7, 8, 13, 15) NOTES: (1) Inactive Assembly - Spares support only for parts listed. (2) Inactive Part - No longer available for spares support. (3) Extruded body formerly used steel body P/N which is no longer available. (4) Extruded body formerly used steel body P/N which is no longer available. 3-7

70 Master Cylinder Push Type 10-24C, 10-24D, 10-30, 10-30A, 10-30B, 10-30D, 10-70, 10-70A, 10-70B, B A A A A A A 16A 3C A A A A 3D NOTE: Parts list for reference only. Contact the airframe manufacturer to order master cylinders and components listed. PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Body Cylinder Body Cylinder Body Cylinder Body Cylinder Body Cylinder Body 1 1 1A Cylinder Body Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly 1 (3) Piston Rod Assembly Piston Rod Assembly 1 3A Rod-Piston Rod-Piston 1 3B (3) Rod-Piston 1 (Continued on next page) 10-24C 10-24D (2) 10-30A 10-30B (1) (2) 10-30D A 10-70B

71 Master Cylinder Push Type 10-24C, 10-24D, 10-30, 10-30A, 10-30B, 10-30D, 10-70, 10-70A, 10-70B, (Continued from previous page) PER ASSY. FIG. PART NO. DESCRIPTION 3C Rod-Piston 1 3D Rod-Piston End Gland End Gland End Gland End Gland End Gland O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) Washer-Wiper Spring-Return Spring-Return Spring-Return O-Ring A Washer-Seal Piston Piston Piston Piston O-Ring (MS ) O-Ring (MS ) Spring-Piston Spring-Piston Spring Guide Bushing A Spring Guide Snap Ring A Snap Ring Snap Ring-Rod Clevis A Clevis Washer (AN L) Washer (AN L) Washer-Star (MS ) Nut-Check (AN316-4) A Nut-Check (AM316-5) Spring-Return Snap Ring Snap Ring Snap Ring C 10-24D (2) 10-30A 10-30B (1) (2) 10-30D A 10-70B Repair Kit (5, 6, 9) Repair Kit (5, 6, 7, 9, 9A, 12, 14, 14A, 15) Repair Kit (5, 6, 9A) NOTES: (1) Inactive Assembly - Spares support only for parts listed. (2) SB Service Bulletin Kit upgrades and 10-30B to 10-30D configuration per SB7093. (3) Inactive Part - No longer available for spares support. 3-9

72 Master Cylinder Push Type 10-30C PER ASSY. NOTES: (1) Master Cylinder 10-30C is FAA PMA Approved for use on Slingsby Aviation Ltd. Aircraft Models T67 GRP series. The master cylinder and all components listed are available for sale thru distribution. FIG. PART NO. DESCRIPTION Cylinder Body Piston Rod Piston End Gland Bushing Spring Retaining Ring Spring O-Ring (MS ) O-Ring (MS ) O-Ring Washer, Wiper Washer (AN L) Washer, Star (MS ) Nut, Jam (AN316-4) Clevis Bracket Assembly Screw (MS24694-S49) Insert, Locking (MS21209F1-15L) Ring, Retaining Elbow, Male Tube Fitting (AN816-4D) C Repair Kit (9, 10, 11)

73 3 This page intentionally left blank 3-11

74 Master Cylinder Push Type 10-46, 10-51, , 10-52, 10-58D, 10-58E, 10-58F, NOTE: Parts list for reference only. Contact the airframe manufacturer to order master cylinders and components listed (1) PER ASSY D (1) (2) (4) FIG. PART NO. DESCRIPTION Cylinder Body Cylinder Body Cylinder Body 1 1A Cylinder Body 1 1 1B Cylinder Body Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly 1 1 2A Piston Rod 1 2B Piston Rod End Gland End Gland End Gland 1 1 (3) End Gland 1 (Continued on next page) 10-58E (6) 10-58F

75 Master Cylinder Push Type 10-46, 10-51, , 10-52, 10-58D, 10-58E, 10-58F, (Continued from previous page) PER ASSY (1) D (1) (2) (4) FIG. PART NO. DESCRIPTION O-Ring O-Ring (MS ) Ring, Back Up (MS ) O-Ring (MS ) O-Ring O-Ring (MS ) Snap Ring A Snap Ring Spacer Spacer Spacer Spacer O-Ring (MS ) O-Ring Piston Piston Piston 1 1 (3) Piston Piston Washer Seal A Washer Seal O-Ring (MS ) O-Ring O-Ring (MS ) 1 (3) O-Ring Spring, Piston Spring, Piston Washer (AN L) Spring, Return Spring, Return Spring, Return Spacer Snap Ring Snap Ring Snap Ring Nut, Lock (AN316-5) A Nut Clevis 1 19A Clevis 1 19B Clevis Pin, Roll Retainer, Spring E (6) 10-58F NOTES: (1) Inactive assembly - spares support only for parts listed. (2) 10-58C replaced by 10-58D. (3) Inactive part - No longer available for spares support. (4) 10-58D superseded by 10-58E. (5) The following Cleveland Master Cylinders were formerly manufactured by Gerdes Product Co. C.W.B. GERDES NUMBER NUMBER A A A (6) SB Service Bulletin Kit Parts List upgrades master cylinder to 10-58F per Cleveland Service Bulletin SB Repair Kit (4, 6, 9, 12) Repair Kit (4, 5, 6, 7, 7A, 9, 12) Repair Kit (4, 6, 9, 12) Repair Kit (4, 6, 7, 11,12) A Repair Kit (4, 6, 11A, 12, 20)

76 Master Cylinder Push Type 10-49, 10-50, 10-54, 10-54A, 10-55, 10-55A, 10-55B, NOTE: Parts list for reference only. Contact airframe manufacturer to order master cylinders and components listed. PER ASSY. NOTES: (1) The following Cleveland master cylinders were formerly manufactured by Gerdes Products Co. C.W.B. GERDES NUMBER NUMBER A A A (2) Master Cylinder 10-55B replaces 10-55A. Both are FAA PMA Approved for use on General Avia Aircraft Model F22. The master cylinder and all components listed are available thru distribution A A (2) FIG. PART NO. DESCRIPTION Cylinder Body Cylinder Body Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly Piston Rod Piston Rod Piston Rod Piston Rod Stat-O-Seal Piston O-Ring (MS ) Spring Guide-Spring Spacer Gland-End O-Ring (MS ) O-Ring (MS ) Snap Ring Spring-Return Nut-Check (AN316-5) Clevis Clevis Clevis B (2) Repair Kit (4, 6, 10, 11)

77 Master Cylinder Push Type , A 6A 5A 8A 9A 18A A 16A 4A 10A A 3A 14A 11 NOTES: (1) and spares are available thru distribution; PMA approved part used in Wheeled Landing Gear Kit for Bell 412. (2) The following Cleveland master cylinders were formerly manufactured by Gerdes Product Co. NOTE: Parts list for reference only. Contact airframe manufacturer to order master cylinders and components listed. PER ASSY. C.W.B. GERDES NUMBER NUMBER A PER ASSY. FIG. PART NO. DESCRIPTION Housing Assembly Body Assembly Piston Rod Assembly Rod Piston 1 3A Shaft Stat-O-Seal 1 4A O-Ring (MS ) Piston 1 5A Piston Back Up Ring (MS ) 1 6A Back Up Ring (MS ) O-Ring (MS ) 1 7A O-Ring (MS ) Spring 1 8A Spring Snap Ring 1 9A Washer (AN960C10) (1) FIG. PART NO. DESCRIPTION Snap Ring 1 10A Snap Ring Spacer Thrust Collar End Gland 1 13A End Gland O-Ring (MS ) 1 14A O-Ring (MS ) Backup Ring (MS ) O-Ring (MS ) 1 16A O-Ring (MS ) Snap RIng 1 17A Snap Ring Spring-Return 1 18A Spring-Return Repair Kit (4, 6, 7, 14, 15, 16) Repair Kit (4A, 6A, 7A, 14A, 16A, 17A) (1) 3-15

78 Master Cylinder Push Type NOTE: Parts list for reference only. Contact airframe manufacturer to order master cylinders and components listed. PER ASSY FIG. PART NO. DESCRIPTION Cylinder Body Piston Rod Assembly Piston Rod Packing Gland Washer Piston O-Ring (MS ) Washer-Seal Snap Ring Spring Spring Bushing O-Ring (MS ) O-Ring (MS ) Retainer Ring Clevis Nut (AN316-5) Repair Kit (7, 8, 13, 14)

79 Master Cylinder Push Type 10-78, 10-78A, 10-78B 3 NOTE: Parts list for reference only. Contact airframe manufacturer to order master cylinders and components listed. PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Body Piston Rod Assembly Piston Rod Stat-O-Seal Piston O-Ring (MS ) Spring-Piston Spring Guide End Gland O-Ring (MS ) O-Ring (MS ) Return Spring Retaining Ring Nut, Jam (AN316-4) Clevis Spherical Bearing Fitting Fitting O-Ring (MS ) Repair Kit (4, 6, 10, 11, 18) A 10-78B 3-17

80 Master Cylinder Push Type with Parking Brake 10-5, 10-5B, 10-5C, 10-5E NOTE: Parts list for reference only. Contact airframe manufacturer to order master cylinders and components listed. FIG. PART NO. DESCRIPTION PER ASSY B (1) 10-5C 10-5E Hydraulic Cylinder Assembly Hydraulic Cylinder Assembly 1 1A Hydraulic Cylinder Assembly Piston Rod Assembly Piston Rod Assembly Rod Gland-End O-Ring-Gland (MS ) O-Ring-Gland (MS ) Washer-Seal A Piston B O-Ring (MS ) Spring Bushing Ring-Snap Spring-Return Washer (AN L) Nut-Jam (AN316-4) Clevis A Clevis 1 1 FIG. PART NO. DESCRIPTION PER ASSY B (1) 10-5C 10-5E Cam Assembly O-Ring (MS ) Bushing Spring Washer (AN960-10) Nut (AN ) Bushing Screw-Set (#8-32x1/8) Valve O-Ring Spring Tube Fitting (MS D) Tube Fitting (MS D) Repair Kit (5, 6, 7, 8B, 17, 25) Repair Kit (5, 6, 7, 8B, 11, 13) 1 NOTES: (1) 10-5B does not include Parking Brake. 3-18

81 Master Cylinder Push Type with Reservoir 10-21, 10-21A 3 NOTE: Parts list for reference only. Contact airframe manufacturer to order master cylinders and components listed. PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Piston Rod Assembly Piston Rod Assembly Piston Rod Piston Rod End Gland End Gland Fitting (Gits 502 "G") Feld-Rod Spacer-Piston Washer Piston O-Ring (MS ) Bushing Spring Ring-Snap Spring Lever-Parking Spring Spacer Bushing Plate-Spring Retainer Screw-Fil. Hd. (AN ) Washer-Lock (AN936-A10) Washer (AN ) Rollpin Screw-Fil. Hd. (AN ) Washer-Lock (MS ) Repair Kit (5, 7, 9) A 3-19

82 Master Cylinder Push Type with Reservoir 10-34, 10-35, 10-36, 10-38, 10-39, 10-45,

83 Master Cylinder Push Type with Reservoir 10-34, 10-35, 10-36, 10-38, 10-39, 10-45, NOTE: Parts list for reference only. Contact the airframe manufacturer to order master cylinders and components listed. PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Body Cylinder Body Cylinder Body Cylinder Body Cylinder Body Spring-Return Spring-Return Piston Rod Assembly Piston Rod 1 1 4A Piston Rod Piston Rod O-Ring (MS ) Washer Stat-O-Seal Piston Piston Piston O-Ring, Piston (MS ) O-Ring, Piston (MS ) O-Ring, Piston (MS ) Spring-Piston Spring-Piston Snap Ring Spring Guide Snap Ring Nut-Check (AN316-5) Clevis-Rod Clevis-Rod Screw & Washer Assembly A Screw B Washer O-Ring, Reservoir Cover Assembly A Cover Plate B Bushing-Bronze C Retaining Ring Filler Plug Snap Ring Adapter-Clevis Nut-Lock (AN ) Thrust Collar (2) (2) (2) (2) (2) (2) (1) NOTES: (1) and spares are available thru distribution. PMA approved details of kit for Cessna 441. (2) The following Cleveland master cylinders were formerly manufactured by Gerdes Products Co. C.W.B. GERDES NUMBER NUMBER A A A A A A Repair Kit (5, 9, 17) Repair Kit (6, 7, 9, 16A, 16B, 17) Repair Kit (7, 9, 17)

84 Master Cylinder Push Type with Reservoir , ,

85 Master Cylinder Push Type with Reservoir , , NOTE: Parts list for reference only. Contact the airframe manufacturer to order master cylinders and components listed. PER ASSY (1) (4) (2) FIG. PART NO. DESCRIPTION Hydraulic Cylinder Assembly Hydraulic Cylinder Assembly Piston Rod Assembly 1 2A Piston Rod Assembly Piston Rod Piston Rod Snap Ring 1 1 4A Snap RIng Thrust Collar O-Ring (MS ) 1 1 6A Stat-O-Seal Piston Piston Piston O-Ring (MS ) O-Ring (MS ) Back Up Ring (MS ) Back Up Ring (MS ) Spring Spring Washer A Retaining Ring Cover Plate Cover Plate Plug-Vented Gland 1 (3) Gland 1 14A Bushing Retaining Ring Retaining Ring O-Ring (MS ) O-Ring (MS ) Back Up Ring (MS ) O-Ring Retaining Ring Retaining Ring Button Head Screw Washer (AN960-C-10) Washer (AN960-10) Reservoir Valve Assembly A O-Ring (MS ) O-Ring (MS ) Return Spring Return Spring 1 NOTES: (1) Inactive assembly - spares support only for parts listed. (2) and spares are available thru distribution; PMA approved part used in Wheeled Landing Gear Kit for Bell 412. (3) Inactive part - no longer available for spares support. (4) The following Cleveland master cylinders were formerly manufactured by Gerdes Product Co. C.W.B. GERDES NUMBER NUMBER A Repair Kit (6, 8, 9, 16, 17, 18, 22A) Repair Kit (6, 8, 9, 15, 16, 18, 19, 22A, 23)

86 Master Cylinder Pull Type 10-17, 10-23, 10-23A, 10-23C, 10-23F, 10-75, 10-86, 10-86A NOTE: Parts list for reference only. Contact airframe manufacturer to order master cylinders and components listed. PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Body Cylinder Body A 10-23C 10-23F A Cylinder Body 1 1A Cylinder Body Cylinder Body (1) 1 NOTES: (1) Extruded body formerly used steel body P/N which is no longer available. (Continued on next page) 3-24

87 Master Cylinder Pull Type 10-17, 10-23, 10-23A, 10-23C, 10-23F, 10-75, 10-86, 10-86A (Continued from previous page) PER ASSY. FIG. PART NO. DESCRIPTION Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly Piston Rod Assembly Rod-Piston Rod-Piston 1 3A Rod-Piston End Gland End Gland End Gland O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) Piston Piston Piston O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) Spring-Return Spring-Return Washer (AN ) Washer Seal Valve Spring O-Ring (MS ) Washer (AN960-10) Nut (NASM21083N3) Nut (AN ) Ring, Snap Ring, Snap Ring, Snap Clevis Nut A 10-23C 10-23F A Repair Kit (5, 6, 8, 11, 14, 15, 17) Repair Kit (5, 6, 8, 14) Repair Kit (5, 6, 14) Repair Kit (5, 6, 8, 11, 14)

88 Notes 3-26

89 Part Number Index Brake Assembly All SECTION 4 Note! Unless otherwise noted, listed Wheels and Brakes are FAA TSO C26 Approved. For a product to be TSO qualified, it has to have successfully demonstrated its ability to meet minimum performance standards in accordance with FAA recognized rating methods. The TSO approval of a product does not constitute installation approval or applicability on an FAA Type Certificated Aircraft. It is the responsibility of those installing these products to determine that the aircraft installation and its wheel and brake performance requirements are compatible for the TSO ratings of the wheel and brake. TSO approved products must have separate approval for installation in a FAA type certificated aircraft. TSO Approved Products may be installed only if performed under Title 14 CFR Part 43 or the applicable airworthiness requirements. 30-4, , , , A, C, D, E, , , A, , , A, B, C, D , B, C, D, , , A, B, C, E , , A, , A, B, , A, B, , A, AA, AB, AC B, D, E, F, G, H, K L, M, N P, Q, S, T, U, V, W, X, Y, Z, , A, , A, B, C, , B, , A, B, C, D, F, A, B, , A, D, E , A, B , A, B, D, E, F, , A, B, D, E, F, J, K, M, P, Q, S , A, E , A, B C, D, F, G, H, , A, B, C, D, E X, A, B A, B, B, , A, B, X , A, B, , A , , A, B, C, E , , A, B, C, D, E, , , A, B,

90 Part Number Index 30-96, , , A, B, C, D , , , A, B, C, D, E, , , A , , A, C, D , , , , A, B , A, , A, B , A B, C , A , LH, RH , A, LH, RH , A, , , A , A , A , B, , A, B , A, B , A (30-1), (30-8), A (30-72) (30-12), (30-13) C2000 (30-2) C7000 (30-3), C7000A (30-3A) Brake Assembly All C-30018, C , C , C , C , C , C , C C , C , C D , D , D , D , D , D , D , D , D , D , D , D

91 Brake Assembly 6 Drum Type Hydraulic C2000 (30-2) Organic Lining Assy. Number A) C2000 (30-2) NOTES: (1) When ordering lining, order which includes rivets. (2) Refer to the latest revision of AWBCMM0001 Component Maintenance Manual for lining installation instructions. PART QTY. PER ASSY FIG. NUMBER DESCRIPTION A Torque Plate Assy Plate-Torque Brake Adjuster Eccentric Assy. LH Eccentric-Brake Adjuster Nut Nut-Jam (AN316-4) Washer-Lock (MS ) Brake Adjuster Eccentric Assy. RH Eccentric-Brake Adjuster Nut Nut-Jam (AN316-4) Washer-Lock (MS ) Shoe Assy. LH Lining (1) (2) Bushing Rivet (MS ) Shoe Assy. RH Lining (1) (2) Bushing Rivet (MS ) Cylinder Assy Tube Assy Piston Assy Piston-Brake Plate-Wear O-Ring (MS ) O-Ring (MS ) Spring Plate-Anchor Bolt Bolt (AN5-15A) Nut (MS21044-N5) Washer-Lock Nut-Jam Bleeder Assy Body-Bleeder Screw-Bleeder O-Ring (MS )

92 Brake Assembly 6 Drum Type Mechanical C7000 (30-3), C7000A (30-3A) Organic Lining Assy. Number A) C7000 (30-3) B) C7000A (30-3A) NOTES: (1) When ordering lining, order which includes rivets. (2) Refer to the latest revision of AWBCMM0001 Component Maintenance Manual for lining installation instructions. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Plate-Torque Shoe Assy. LH Lining (1) (2) Bushing Rivet (MS ) Plate-Wear Shoe Assy. RH Lining (1) (2) Bushing Rivet (MS ) Plate-Wear Pulley-Bracket Assy Pulley Cable Bracket Pulley Bushing Bushing Bolt (AN3-7A) Nut (NASM21083N3) Bolt (AN4-23A) Bolt (AN4-15A) Washer (AN ) Nut (MS21044-N4) Plate-Anchor Bolt Cam Assy Clip-Washer Clip-Washer Bolt (AN3-5A) Spring Spring Screw (AN ) Washer Bushing

93 Brake Assembly 5 External Single Cylinder, Single Piston 30-9, 30-9A, 30-9C, 30-9D, 30-9E, A, Organic Lining PER ASSY. NOTES: (1) Kit Upgrade converts to A. TSO approved per PRM58. (2) Inactive superseded by 30-9C. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Cylinder Cylinder Piston Assembly Piston O-Ring (MS ) Anchor Bolt Nut (MS21044-N4) Washer (AN ) Washer (AN L) Washer (AN ) Screw-Bleeder Seat-Bleeder Cap-Bleeder Pressure Plate Assy Pressure Plate Assy Pressure Plate Lining Lining Rivet Back Plate Assy Back Plate Assy Back Plate Lining Lining Rivet Shim Bolt (AN4H15A) Bolt Torque Plate Assy Torque Plate Assy Torque Plate Assy A 30-9C 30-9D 30-9E A

94 Brake Assembly 5 External Single Cylinder, Single Piston , Organic Lining Metallic Lining PER ASSY. NOTES: (1) Organic lining. (2) Metallic lining. (3) Insulator Kit retrofits brake to add insulator shims and pistons (1) (2) (3) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Piston Assembly (3) Piston Assembly Piston Piston 1 2A Insulator O-Ring (MS ) Pressure Plate Assy Pressure Plate Assy Pressure Plate Pin Rivet Lining Lining Back Plate Assy Back Plate Assy Back Plate Pin Rivet Lining Lining Anchor Bolt Nut (MS21044-N4) Washer (AN ) Washer (AN L) 2 10A Washer (AN L) Seat-Bleeder Screw-Bleeder Cap-Bleeder Bolt Torque Plate Assy (3) Shim, Insulator 1 4-6

95 Brake Assembly 6 External Single Cylinder, Single Piston A (30-1), 30-4, 30-5, 30-6, 30-7 Organic Lining 4 Assy. Number A) A (30-1) (1) (2) B) 30-4 (1) (3) C) 30-5 (1) (3) D) 30-6 E) 30-7 (1) (2) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Superceded by Kit. (3) Superceded by 30-56A brake and wheel. (4) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E Cylinder Assy Cylinder Assy Cylinder Piston O-Ring (MS ) Anchor Bolt Nut (MS ) Washer (AN L) Washer (AN L) Screw-Bleeder Seat-Bleeder Cap Fitting (AN816-4D) Pressure Plate Assy (4) Pressure Plate Assy Pressure Plate Lining (4) Lining Rivet Back Plate Assy Back Plate Assy. 1 (4) Back Plate Assy Back Plate Back Plate Lining (4) Lining Rivet Bolt (AN5H14A) Torque Plate Assy Torque Plate Assy. 1 (4) Torque Plate Assy Torque Plate Assy

96 Brake Assembly 6 External Single Cylinder, Single Piston 30-18, 30-19, 30-19A, 30-40, 30-40A, Organic Lining 4-8

97 Brake Assembly 6 External Single Cylinder, Single Piston 30-18, 30-19, 30-19A, 30-40, 30-40A, Organic Lining PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly A A (1) (1) (2) Cylinder (3) Cylinder Piston Assembly (3) Piston Assembly Piston (3) Piston O-Ring (MS ) (3) O-Ring Anchor Bolt Anchor Bolt Nut (AN C) Nut (MS21044-N4) Washer (AN L) Washer (AN ) Washer (AN L) Washer (AN L) Screw-Bleeder Seat-Bleeder Cap-Bleeder Fitting (MS D) Fitting (MS D) Fitting (AN816-4D) Pressure Plate Assembly Pressure Plate Assembly Pressure Plate Pressure Plate Lining Lining Rivet Back Plate Assembly Back Plate Back Plate Lining Lining Rivet Bolt (AN5H14A) Bolt (AN5H15A) Bolt Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly 1 (3) Torque Plate Assembly Bushing 2 2 NOTES: (1) Inactive assembly spares support only for parts listed. (2) supersedes (3) Inactive part no longer available for spares support

98 Brake Assembly 6 External Single Cylinder, Single Piston 30-30, 30-55, 30-55B, 30-79, 30-79A, 30-79B, , B, Organic Lining 4-10

99 Brake Assembly 6 External Single Cylinder, Single Piston 30-30, 30-55, 30-55B, 30-79, 30-79A, 30-79B, , B, Organic Lining PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E F G H I Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Cylinder Cylinder Piston Assy Piston Assy Piston Piston O-Ring (MS ) O-Ring (MS ) Pressure Plate Assy Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Assy Back Plate Lining Rivet Anchor Bolt Anchor Bolt Nut (MS21044-N4) (2) Washer (AN L) A Washer (AN ) (2) Seat-Bleeder Screw-Bleeder Cap-Bleeder Seat-Bleeder (1) O-Ring (MS ) (1) Screw-Bleeder (1) Fitting (AN816-4D) Fitting (MS D) Fitting (MS D) Bolt Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Screw-Sock. Hd. (2) 6 Assy. Number A) B) C) 30-55B D) E) 30-79A F) 30-79B G) H) B I) (3) NOTES: (1) Bleeder Assy. special for 30-79B, not shown. (2) Hardware also used on Torque Plate Assy. (3) This brake is not FAA-TSO Approved- Order from Airframe Manufacturer only

100 Brake Assembly 6 External Single Cylinder, Single Piston 30-53, 30-53A, 30-59, 30-59A, 30-59D, 30-59E Organic Lining 4-12

101 Brake Assembly 6 External Single Cylinder, Single Piston 30-53, 30-53A, 30-59, 30-59A, 30-59D, 30-59E Organic Lining PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E F Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Cylinder A Cylinder Piston Assy Piston Assy Piston Assy Piston Piston A Piston O-Ring (MS ) O-Ring (MS ) Anchor Bolt Nut (MS21044-N4) Washer (AN L) Screw-Bleeder Seat-Bleeder Cap-Bleeder Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Lining Rivet Bolt Bolt (ABP4-20AM) Bolt (AN4H17A) Fitting (MS D) Torque Plate Assy Torque Plate Assy Torque Plate Assy. 1 (2) Torque Plate Assy Bushing 2 Assy. Number A) (1) B) 30-53A LH & RH C) D) 30-59A E) 30-59D F) 30-59E NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support

102 Brake Assembly 6 External Single Cylinder, Single Piston 30-56, 30-56A, 30-56B, 30-56C, 30-56D, 30-56F, 30-63, 30-63A, 30-63B, 30-63D, 30-63E, 30-63F, 30-63J, 30-63K, 30-63M, 30-63P, 30-63Q, 30-63S Organic Lining 4-14

103 Brake Assembly 6 External Single Cylinder, Single Piston 30-56, 30-56A, 30-56B, 30-56C, 30-56D, 30-56F, 30-63, 30-63A, 30-63B, 30-63D, 30-63E, 30-63F, 30-63J, 30-63K, 30-63M, 30-63P, 30-63Q, 30-63S Organic Lining PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E F G H I J K L M N O P Q R Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Piston Assy Piston O-Ring (MS ) Pressure Plate Assy Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Assy Back Plate Lining Rivet Anchor Bolt Anchor Bolt Nut (MS21044-N4) Washer (AN L) Seat-Bleeder Screw-Bleeder Cap-Bleeder Fitting (AN816-4D) A Fitting (MS D) Bolt Bolt (AN4H17A) Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Bushing Bushing 4 Assy. Number A) (1) B) 30-56A C) 30-56B D) 30-56C E) 30-56D F) 30-56F G) (1) H) 30-63A I) 30-63B (1) J) 30-63D (1) K) 30-63E L) 30-63F (1) M) 30-63J N) 30-63K 0) 30-63M P) 30-63P Q) 30-63Q R) 30-63S NOTES: (1) Inactive Assembly - spares support only for parts listed

104 Brake Assembly 6 External Single Cylinder, Single Piston 30-75, 30-75A, 30-75B, 30-75X Organic Lining PER ASSY. NOTES: (1) Position of bushing varies with installation. FIG. PART NO. DESCRIPTION Cylinder Assembly A LH & RH Cylinder Assembly Cylinder Piston Assembly Piston O-Ring (MS ) Pressure Plate Assembly Pressure Plate Lining Rivet Back Plate Assembly Back Plate Lining Rivet Anchor Bolt Nut (MS21044-N4) Washer (AN L) Seat-Bleeder Screw-Bleeder Cap-Bleeder Bolt Fitting (MS D) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Bushing (1) B 30-75X 4-16

105 Brake Assembly 6 External Single Cylinder, Single Piston Organic Lining 4 Assy. Number A) PART QTY. PER ASSY FIG. NUMBER DESCRIPTION A Cylinder Piston O-Ring (MS ) Pressure Plate Lining Rivet Back Plate Anchor Bolt Nut (MS21044-N4) Washer (AN L) Seat-Bleeder Screw-Bleeder Cap-Bleeder Fitting (AN816-4D) Bolt

106 Brake Assembly 6 External Single Cylinder, Single Piston , A, B Organic Lining PER ASSY. NOTES: (1) Uses Torque Plate Assy. for left hand brake and for right hand brake. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Piston O-Ring (MS ) Pressure Plate Assembly Pressure Plate Lining Rivet Back Plate Assembly Back Plate Lining Rivet Anchor Bolt Nut (MS21044-N4) Washer (AN L) Seat-Bleeder Screw-Bleeder Cap-Bleeder Fitting (MS D) Fitting (MS D) Bolt (1) Torque Plate Assembly Torque Plate Assembly (1) A B 4-18

107 Brake Assembly 6 External Single Cylinder, Single Piston C-30018, C , C , C , C , C , C , C Organic Lining 4 Assy. Number A) C (3) (4) B) C (3) C) C (3) (4) D) C (3) E) C (3) (4) F) C (3) (4) G) C (3) (4) H) C (3) NOTES: (1) Cylinder sub-assembly includes anchor bolts, nuts and washers to attach. (2) All brake assemblies listed were formerly manufactured by McCauley Industrial Corporation. (3) Inactive assembly spares support only for parts listed. (4) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. (5) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E F G H Cylinder Assy (5) Cylinder Sub-Assy. (1) (5) Cylinder (5) Piston O-Ring (MS ) Anchor Bolt Washer (AN L) Nut Bolt Seat-Bleeder Screw-Bleeder Cap-Bleeder Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Lining Rivet Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy

108 Brake Assembly 6 External Single Cylinder, Single Piston C , C , C Organic Lining Assy. Number A) C (3) (4) B) C (3) (4) C) C (3) NOTES: (1) Cylinder sub-assembly includes anchor bolts, nuts and washers to attach. (2) All brake assemblies listed were formerly manufactured by McCauley Industrial Corporation. (3) Inactive assembly spares support only for parts listed. (4) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. (5) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C Cylinder Assembly (5) Cylinder Sub-Assembly (1) (5) Cylinder (5) Piston O-Ring (MS ) Anchor Bolt Washer (AN L) Nut Bolt (ABP4-22A) O-Ring (MS ) Seat-Bleeder Screw-Bleeder Cap-Bleeder Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Lining Rivet Torque Plate Assy Torque Plate Assy Torque Plate Assy

109 Brake Assembly 6 External Single Cylinder, Dual Piston (30-12), (30-13) Organic Lining 4 Assy. Number A) (30-12) B) (30-13) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Cylinder Assy Cylinder Assy Cylinder Piston Assy O-Ring (MS ) Piston Pressure Plate Assy Lining Rivet Plate Assy Back Plate Assy Back Plate Lining Rivet Anchor Bolt Nut (MS ) Washer (AN L) Cylinder-Retract Spacer Washer Spring Nut (NASM21083N3) Shim Shim Bolt (AN4H15A) Bolt (AN4H17A) Washer (AN L) Bleeder Body Assy Body-Bleeder Screw-Bleeder Screw-Bleeder O-Ring (MS ) O-Ring (MS ) Torque Plate Assy

110 Brake Assembly 6 External Single Cylinder, Dual Piston 30-21, 30-24, 30-35, 30-41, 30-41A, 30-41B, 30-51, 30-51A, 30-51B, 30-60, 30-60A, 30-60B Organic Lining 4-22

111 Brake Assembly 6 External Single Cylinder, Dual Piston 30-21, 30-24, 30-35, 30-41, 30-41A, 30-41B, 30-51, 30-51A, 30-51B, 30-60, 30-60A, 30-60B Organic Lining PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E F G H I J K L Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Cylinder Cylinder 1 1 (5) Cylinder Piston Assy Piston Assy Piston Piston O-Ring (MS ) O-Ring (MS ) Anchor Bolt Nut (MS ) Washer (AN L) Pressure Plate Assy Pressure Plate Assy Pressure Plate Assy Pressure Plate Lining Rivet Shim Shim 1 1 (5) Shim A Shim-Insulating Back Plate Assy Back Plate Assy Back Plate Lining Rivet Bolt (AN4H16A) Bolt (AN4H15A) Bolt Washer (AN L) Seat-Bleeder Screw-Bleeder Cap-Bleeder Fitting (AN816-4D) Fitting (AN822-4D) Fitting (MS D) Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy. 1 1 (5) Torque Plate Assy Bushing (3) 2 2 Assy. Number A) (1) B) (1) C) (1) D) (1) (2) E) 30-41A (1) F) 30-41B G) (1) (6) H) 30-51A I) 30-51B J) (1) (4) K) 30-60A L) 30-60B NOTES: (1) Inactive assembly spares support only for parts listed. (2) superseded by 30-41B. (3) Check position of bushing for proper replacement. (4) superseded by 30-60A A superseded by 30-60B. (5) Inactive part no longer available for spares support. (6) superseded by 30-51B

112 Brake Assembly 6 External Single Cylinder, Dual Piston 30-32, 30-32A, 30-32B, 30-32C, 30-32E Organic Lining 4-24

113 Brake Assembly 6 External Single Cylinder, Dual Piston 30-32, 30-32A, 30-32B, 30-32C, 30-32E Organic Lining PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder (1) (2) Cylinder Piston Assembly Piston Insulator O-Ring (MS ) Pressure Plate Assembly (2) Pressure Plate Assembly Pressure Plate Lining (2) Lining Rivet (2) Pin Back Plate Assembly (2) Back Plate Assembly Back Plate Lining (2) Lining Rivet (2) Pin Anchor Bolt Anchor Bolt Nut (MS ) Washer (AN L) Shim-Insulator Shim-Back Plate Bolt Washer (AN L) O-Ring (MS ) Seat-Bleeder Screw-Bleeder Cap-Bleeder Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly A (1) 30-32B 30-32C 30-32E NOTES: (1) Inactive assembly - spares support only for parts listed. (2) Inactive part - no longer available for spares support

114 Brake Assembly 6 External Single Cylinder, Dual Piston 30-52, 30-52A, 30-52B, 30-52D, 30-52E, 30-52F, 30-52G, 30-52H, 30-52K Organic Lining 30-52L, 30-52M, 30-52N NOTES: (1) Use with (LH) and (RH) Torque Plates. (2) supersedes 30-52G. (3) When reordering, specify LH or RH. (4) 30-52N supersedes 30-52D when reordering. (5) Use with (LH) and (RH) Torque Plates order from airframe manufacturer only. (6) Inactive assembly spares support only for parts listed. (7) Inactive part no longer available for spares support. 4-26

115 Brake Assembly 6 External Single Cylinder, Dual Piston 30-52, 30-52A, 30-52B, 30-52D, 30-52E, 30-52F, 30-52G, 30-52H, 30-52K, 30-52L, 30-52M, 30-52N Organic Lining PER ASSY A 30-52B 30-52D (4) (6) 30-52E 30-52F 30-52G (2) (6) 30-52H (1) (3) 30-52K 30-52L (5) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Cylinder Cylinder Piston Assembly Piston O-Ring (MS ) Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Lining Rivet Bolt Bolt (AN4H21A) Washer (AN ) Anchor Bolt Nut (MS21044-N4) Washer (AN L) Seat-Bleeder Seat-Bleeder Screw-Bleeder Cap-Bleeder Fitting (MS D) Fitting (AN837-4D) O-Ring (MS ) Nut (AN924-4D) Torque Plate Assembly 1 1 S Torque Plate Assembly 1 E Torque Plate Assembly 1 E Torque Plate Assembly Torque Plate Assembly 1 N Torque Plate Assembly O Torque Plate Assembly T Torque Plate Assembly E Torque Plate Assembly S Torque Plate Assembly 1 (7) Torque Plate Assembly Bushing M 30-52N

116 Brake Assembly 6 External Single Cylinder, Dual Piston 30-52P, 30-52Q, 30-52S, 30-52T, 30-52U, 30-52V, 30-52W, 30-52AA, 30-52AB, 30-52AC Organic Lining 30-52X, 30-52Y, 30-52Z, NOTES: (1) Use with (LH) and (RH) Torque Plates. (2) Use with (LH) and (RH) Torque Plates. (3) When reordering, specify LH or RH. (4) 30-52Y to be used with 40-75J corrosive resistant equipment. (5) Inactive assembly spares support only for parts listed. (6) Use with (LH) and (RH) Torque Plates. (7) Use with (LH) and (RH) Torque Plates. (8) Use with (LH) and (RH) Torque Plates P 30-52Q 30-52S (1) 30-52T 30-52U PER ASSY V (2) (3) 30-52W 30-52X (5) 30-52Y (4) 30-52Z (3) (6) 30-52AA (3) (7) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Cylinder Cylinder Cylinder Cylinder Cylinder (Continued on next page) 30-52AB 30-52AC (3) (8) 4-28

117 Brake Assembly 6 External Single Cylinder, Dual Piston 30-52P, 30-52Q, 30-52S, 30-52T, 30-52U, 30-52V, 30-52W, 30-52X, 30-52Y, 30-52Z, 30-52AA, 30-52AB, 30-52AC Organic Lining (Continued from previous page) PER ASSY P 30-52Q 30-52S (1) 30-52T 30-52U 30-52V (2) (3) 30-52W 30-52X (5) 30-52Y (4) 30-52Z (3) (6) 30-52AA (3) (7) FIG. PART NO. DESCRIPTION Piston Assembly Piston Assembly Piston Assembly Piston Piston O-Ring (MS ) O-Ring (M83461/1-222) Pressure Plate Assy Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Assy Back Plate Lining Rivet Bolt Washer (AN ) Anchor Bolt Anchor Bolt Anchor Bolt Nut (MS21044-N4) Washer (AN L) Seat-Bleeder Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring (MS ) Fitting (MS D) A Fitting Torque Plate Assembly S 1 S S S 1 S Torque Plate Assembly E E E E E Torque Plate Assembly E E E E E Torque Plate Assembly Torque Plate Assembly N N 1 N N N Torque Plate Assembly O 1 O 1 1 O O O Torque Plate Assembly 1 T T T T T Torque Plate Assembly E E E E E Torque Plate Assembly 1 S S S S S Bushing AB 30-52AC (3) (8)

118 Brake Assembly 6 External Single Cylinder, Dual Piston 30-54, 30-54A, 30-54B, 30-54C, 30-58A, 30-58B, 30-61, 30-61D, 30-61E, 30-61F, 30-65, 30-65A, 30-65E Organic Lining PER ASSY A 30-54B 30-54C 30-58A (1) 30-58B (1) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly D 30-61E 30-61F (1) Cylinder Cylinder Cylinder Piston Assembly Piston Assembly Piston Piston 2 (Continued on next page) A 30-65E 4-30

119 Brake Assembly 6 External Single Cylinder, Dual Piston 30-54, 30-54A, 30-54B, 30-54C, 30-58A, 30-58B, 30-61, 30-61D, 30-61E, 30-61F, 30-65, 30-65A, 30-65E Organic Lining (Continued from previous page) PER ASSY A 30-54B 30-54C 30-58A (1) 30-58B (1) FIG. PART NO. DESCRIPTION O-Ring (MS ) Spring-Friction Pressure Plate Assembly Pressure Plate Assembly Pressure Plate Assembly 1 (2) Pressure Plate Assembly Pressure Plate Lining (2) Lining Rivet Back Plate Assembly Back Plate Assembly Back Plate Assembly Back Plate Assembly Back Plate Assembly 2 (2) Back Plate Assembly Back Plate Lining (2) Lining Rivet Anchor Bolt Anchor Bolt Nut (MS21044-N4) Washer (AN L) Washer (AN ) Seat-Bleeder Screw-Bleeder Cap-Bleeder Fitting (AN8164D) Fitting (MS D) Bolt Bolt (AN4H21A) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly 1 (2) Torque Plate Assembly Bushing D 30-61E 30-61F (1) A 30-65E 4 NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support. 4-31

120 Brake Assembly 6 External Single Cylinder, Dual Piston D , D , D , D , D , D , D , D , D , D , D , D Organic Lining Assy. Number A) D (3) (4) B) D (3) (4) C) D (3) (5) D) D (3) (5) E) D (3) F) D (3) G) D H) D I) D (3) (6) J) D (3) (6) K) D (3) L) D (3) NOTES: (1) Cylinder sub-assembly includes anchor bolts, nuts and washers to attach. (2) All brake assemblies listed were formerly manufactured by McCauley Industrial Corporation. (3) Inactive assembly spares support only for parts listed. (4) Superseded by 30-52U per Cessna Service Bulletin SEB00-5. Also superseded by conversion kit. See Conversion Kit Directory for applicable Aircraft model. (5) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. (6) Superseded by (7) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E F G H I J K L Cylinder Assembly Cylinder Assembly (7) Cylinder Sub-Assembly (1) (7) Cylinder Piston O-Ring (MS ) Anchor Bolt Washer (AN L) Nut (7) Pressure Plate Assy (7) Plate-Pressure Lining Rivet Back Plate Assy Plate-Back Lining Rivet Bolt Washer (AN ) O-Ring (MS ) Seat-Bleeder Screw-Bleeder Cap-Bleeder Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy

121 Brake Assembly 6 External Single Cylinder, Dual Piston 30-23, 30-23A, 30-23B, 30-23C, 30-23D Metallic Lining 4 Assy. Number A) (3) (4) B) 30-23A (1) (2) (4) C) 30-23B (4) D) 30-23C (4) E) 30-23D (4) NOTES: (1) Inactive assembly spares support only for parts listed. (2) 30-23C supersedes 30-23A. (3) 30-23: Cylinder supersedes Cylinder & Shim. (4) Torque plate, Item 21, supplied by airframe manufacturer. (5) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E Cylinder Assy Cylinder Assy Cylinder Assy Cylinder (5) Cylinder Piston Assy Piston Insulator O-Ring (MS ) Pressure Plate Assy Pressure Plate Lining Pin Back Plate Assy Back Plate Lining Pin Anchor Bolt Anchor Bolt Nut (MS ) Washer (AN L) Shim-Insulator Bolt (AN4H16A) Washer (AN L) Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring (MS ) Fitting (AN815-4D) Fitting (AN919-2D)

122 Brake Assembly 6 External Single Cylinder, Dual Piston 30-61A, 30-61B, 30-83, 30-83A Metallic Lining Assy. Number A) 30-61A (1) B) 30-61B (2) C) D) 30-83A NOTES: (1) Inactive assembly spares support only for parts listed. (2) This brake is not FAA-TSO approved order from airframe manufacturer only. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Cylinder Cylinder Piston Assy Piston Assy Piston Piston Insulator O-Ring (MS ) Spring-Friction Pressure Plate Assy Pressure Plate Assy Pressure Plate Back Plate Assy Back Plate Assy Back Plate Pin-Lining Lining Lining Shim-Insulator Anchor Bolt Nut (MS21044-N4) Bolt Bolt Bolt (AN4H21A) Washer (AN L) Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder Torque Plate Assy Torque Plate Assy Bushing-T.P

123 Brake Assembly 6 External Single Cylinder, Dual Piston , A, C, D Metallic Lining Assy. Number A) B) A C) C (1) (2) D) D NOTES: (1) Uses Torque Plate Assy. for left hand brake and for right hand brake. (2) When reordering, specify LH or RH. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D Cylinder Assy Cylinder Assy Cylinder Cylinder Cylinder Piston Assy Piston Insulator O-Ring (MS ) Spring-Friction Pressure Plate Assy Pressure Plate Back Plate Assy Back Plate Pin-Lining Lining Shim-Insulator Anchor Bolt Nut (MS21044-N4) Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder Seat-Bleeder O-Ring (MS ) Torque Plate Assy Torque Plate Assy Torque Plate Assy Bushing-T.P

124 Brake Assembly 6 External Single Cylinder, Dual Piston , , A, B Metallic Lining PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Piston Assembly Piston Assembly Piston Insulator O-Ring (MS ) O-Ring Spring-Friction Pressure Plate Assembly Pressure Plate Pin-Lining Lining Back Plate Assembly Back Plate Pin-Lining Lining A B PER ASSY. FIG. PART NO. DESCRIPTION Shim-Insulator Anchor Bolt Anchor Bolt Anchor Bolt Nut (MS21044-N4) Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder Inlet Fitting (MS D) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Bushing-Torque Plate A B 4-36

125 Brake Assembly 6 External Single Cylinder, Dual Piston Organic Lining 4 Assy. Number A) (1) NOTES: (1) High corrosion resistant, amphibious equipment. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Cylinder Assy Cylinder Piston O-Ring (MS ) Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Lining Rivet Bolt (MS21250H04026) Washer (MS20002C4) Anchor Bolt Nut (MS21044-N4) Washer (AN ) Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring (MS ) Fitting Torque Plate Assy Bushing

126 Brake Assembly 6 External Dual Cylinder, Dual Piston (30-8), A (30-72) Organic Lining Metallic Lining 4-38

127 Brake Assembly 6 External Dual Cylinder, Dual Piston (30-8), A (30-72) Organic Lining Metallic Lining PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Cylinder Assy Cylinder Assy Cylinder Cylinder Piston Assy Piston Assy Piston Piston O-Ring (MS ) Insulator Pressure Plate Assy Pressure Plate Assy Pressure Plate Lining 4 8A Lining Rivet Pin Back Plate Assy Back Plate Assy Back Plate Lining 4 12A Lining Rivet Pin Shim Shim-Insulator Bolt (AN4H21A) Washer (AN L) Cylinder-Retract Spacer Washer Spring Nut (NASM21083N3) Seat-Bleeder Seat-Bleeder Screw-Bleeder Cap-Bleeder Anchor Bolt Washer (AN L) Nut (MS21044-N5) Fitting (AN815-4D) O-Ring (MS ) Torque Plate Assy Torque Plate 1 1 Assy. Number A) (30-8) (1) B) A (30-72) (2) NOTES: (1) Organic lining. (2) Metallic lining

128 Brake Assembly 6 External Dual Cylinder, Dual Piston 30-96, Metallic Lining Assy. Number A) B) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Cylinder Assy Cylinder Assy Cylinder Piston Assy Piston Friction Spring Insulator Pressure Plate Assy Pressure Plate Lining Pin Back Plate Assy Back Plate Assy Back Plate Back Plate Lining Pin Shim-Insulator Bolt (AN4H21) Washer (AN ) Anchor Bolt Nut (MS21044-N4) Fitting (AN815-4D) O-Ring (MS ) O-Ring (MS ) Seat-Bleeder Screw-Bleeder Cap-Bleeder Torque Plate Assy

129 Brake Assembly 8 External Single Cylinder, Dual Piston 30-66A, 30-66B Organic Lining 4 PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly A Cylinder Assembly Cylinder Piston Assembly Piston O-Ring (MS ) Pressure Plate Assembly Pressure Plate Lining Rivet Back Plate Assembly Back Plate Lining Rivet Shim-Back Plate B PER ASSY. FIG. PART NO. DESCRIPTION Anchor Bolt Washer (AN L) Nut (MS21044-N4) Bolt Washer (AN ) Fitting (AN815-4D) Fitting (AN833-4D) Nut (AN924-4D) Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring (MS ) Torque Plate Assembly Torque Plate Assembly A 30-66B 4-41

130 Brake Assembly 8 External Single Cylinder, Dual Piston 30-66, 30-66C, 30-66D, 30-66F, 30-66G, 30-66H, 30-69A, 30-69B, 30-74B, Metallic Lining (1) FIG. PART NO. DESCRIPTION Cylinder Assembly C 30-66D (2) (3) 30-66F PER ASSY Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Cylinder Cylinder Anchor Bolt Anchor Bolt Anchor Bolt Washer (AN L) Nut (MS21044-N4) Piston Assembly Piston Assembly Piston Assembly Piston Piston O-Ring (MS ) O-Ring (M83461/1-222) Spring-Friction Insulator (Continued on next page) 30-66G 30-66H 30-69A 30-69B 30-74B

131 Brake Assembly 8 External Single Cylinder, Dual Piston 30-66, 30-66C, 30-66D, 30-66F, 30-66G, 30-66H, 30-69A, 30-69B, 30-74B, Metallic Lining (Continued from previous page) PER ASSY (1) FIG. PART NO. DESCRIPTION (5) (6) (7) Pressure Plate Assembly Pressure Plate Assembly C Pressure Plate Pressure Plate Pin-Lining (8) (9) (10) Back Plate Assembly Back Plate Assembly Back Plate Pin-Lining Shim-Insulator Shim-Back Plate Lining Lining Lining D (2) (3) Lining Bolt Bolt Bolt O-Ring (MS ) O-Ring (MS ) Seat-Bleeder Seat-Bleeder Screw-Bleeder Cap-Bleeder Fitting (AN815-4D) Fitting (AN919-2D) Fitting (AN833-4D) Nut (AN924-4D) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly 1 (4) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Bushing Bushing F 30-66G 30-66H 30-69A 30-69B 30-74B NOTES: (1) Assemblies manufactured after 12/76 use lining, was (2) Inactive assembly - spares support only for parts listed. (3) 30-66D superseded by 30-66H per SB7053 (4) Inactive part - no longer available for spares support. (5) is the spares replacement for used on 30-66C, -66H, -69A, 30-69B, and includes items 9, 11, and 14. (6) is the spares replacement for used on 30-66, 30-66F, , and includes items 9, 11, and 14. (7) is the spares replacement for used on 30-66G and includes items 9, 11, and 14. (8) is the spares replacement for used on 30-66, 30-66F, , and includes items 10, 11, and 14. (9) is the spares replacement for used on 30-66C, -66H, -69A, 30-69B, and includes items 10, 11, and 14. (10) is the spares replacement for used on 30-66G and includes items 10, 11, and

132 Brake Assembly 8 External Single Cylinder, Three Piston 30-93, 30-93A, 30-93B, 30-93C, 30-93D, 30-93E, Metallic Lining FIG. PART NO. DESCRIPTION Cylinder Assembly A 30-93B PER ASSY C 30-93D (1) (2) Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Cylinder Cylinder O-Ring (MS ) Piston Assembly Piston Friction Ring Insulator (3) (4) (5) Pressure Plate Assembly (6) Pressure Plate Assembly Pressure Plate Pin (Continued on next page) 30-93E

133 Brake Assembly 8 External Single Cylinder, Three Piston 30-93, 30-93A, 30-93B, 30-93C, 30-93D, 30-93E, Metallic Lining (Continued from previous page) PER ASSY. FIG. PART NO. DESCRIPTION (7) (8) (9) Back Plate Assembly A 30-93B 30-93C 30-93D (1) (2) (10) Back Plate Assembly Back Plate Back Plate Pin Lining Lining Lining Shim-Insulator Anchor Bolt Anchor Bolt Washer (AN L) Washer (MS ) Nut (MS21044-N4) Bolt Bolt (MS ) O-Ring (MS ) Seat-Bleeder Screw-Bleeder Cap-Bleeder Fitting (AN919-2D) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly (1) Torque Plate Assembly (1) Torque Plate Assembly Bushing E NOTES: (1) Uses for left hand brake and for right hand brake. (2) When reordering, specify LH or RH. (3) is the spares replacement for used on 30-93A and includes items 6, 8, and 9. (4) is the spares replacement for used on 30-93, -93B, -93D, and 30-93E and includes items 6, 8, and 9. (5) is the spares replacement for used on 30-93C and includes items 6, 8, and 9. (6) is the spares replacement for used on and includes items 6, 8, and 9. (7) is the spares replacement for used on 30-93, -93B, -93D, and 30-93E and includes items 7, 8, and 9. (8) is the spares replacement for used on 30-93A and includes items 7, 8, and 9. (9) is the spares replacement for used on 30-93C and includes items 7, 8, and 9. (10) is the spares replacement for used on and includes items 7, 8, and

134 Brake Assembly 8 External Dual Cylinder, Dual Piston Metallic Lining PER ASSY. NOTES: (1) Uses Torque Plate for left hand Brake; Torque Plate for right hand Brake order separately from airframe manufacturer. (2) is the spares replacement for and includes items 6, 8, and 9. (3) is the spares replacement for and includes items 7, 8, and 9. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder O-Ring (MS ) Piston Assembly Piston Spring-Friction Insulator (2) Pressure Plate Assembly Pressure Plate Pin (3) Back Plate Assembly Back Plate Pin Lining Shim-Insulator Anchor Bolt Nut (MS21044-N4) Bolt Washer (AN L) Cap-Bleeder Screw-Bleeder O-Ring (MS ) Seat-Bleeder Torque Plate Assembly (ref) Note (1) Torque Plate Assembly (ref) Note (1)

135 This page intentionally left blank

136 Brake Assembly 8 External Dual Cylinder, Dual Piston , A, Metallic Lining 4-48

137 Brake Assembly 8 External Dual Cylinder, Dual Piston , A, Metallic Lining PER ASSY (2) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder O-Ring (MS ) Piston Assembly Piston Insulator Friction Spring Piston Guide Bolt (AN3-5A) Washer (AN960-10L) Stat-O-Seal Anchor Bolt Anchor Bolt Washer (AN L) A Washer (MS20002C4) Bolt (AN4H5A) Pressure Plate/Lining Assembly Pressure Plate/Lining Assembly Back Plate/Lining Assembly Back Plate/Lining Assembly Shim-Insulator Bolt Bolt (MS21250H04026) Seat-Bleeder Screw-Bleeder O-Ring Cap-Bleeder Fitting Fitting Hose Assembly Hose Assembly Hose Assembly Fitting A Torque Plate Assembly Torque Plate Assembly Torque Plate (1) Torque Backup Plate Bolt (AN4-10A) Washer (AN ) A NOTES: (1) Torque Plate is for spares replacement only. It does not include item 25, Torque Backup Plate; item 26, Bolts; or item 27, Washers. (2) Hose Replacement Upgrade Kit available. Refer to PRM

138 Brake Assembly 10 External Single Cylinder, Dual Piston 30-67, 30-67A, 30-67B, 30-67C, 30-67D, 30-67X, , , Organic Lining 4-50

139 Brake Assembly 10 External Single Cylinder, Dual Piston 30-67, 30-67A, 30-67B, 30-67C, 30-67D, 30-67X, , , Organic Lining PER ASSY A 30-67B 30-67C 30-67D 30-67X (1) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Cylinder Piston Assembly Piston Assembly Piston Assembly Piston Piston Friction Spring O-Ring (MS ) O-Ring Pressure Plate Assembly Pressure Plate Lining Rivet Back Plate Assembly Back Plate Lining Rivet Anchor Bolt Nut (MS21044-N4) Bolt Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) O-Ring Nut (AN924-4D) Fitting (AN833-4D) Shim Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly NOTES: (1) This brake uses automotive brake fluid

140 Brake Assembly 10 External Single Cylinder, Three Piston 30-89, 30-89A, 30-89B, 30-89C, 30-89E Organic Lining 4-52

141 Brake Assembly 10 External Single Cylinder, Three Piston 30-89, 30-89A, 30-89B, 30-89C, 30-89E Organic Lining PER ASSY (1) (2) 30-89A (3) 30-89B (3) 30-89C 30-89E (4) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Piston Assembly Piston Friction Spring Pressure Plate Assembly Pressure Plate Lining Rivet Back Plate Assembly Back Plate Lining Rivet Anchor Bolt Nut (MS21044-N4) Bolt Washer (AN L) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) O-Ring (MS ) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly 1 4 NOTES: (1) Uses Torque Plate Assy. for left hand brake and for right hand brake. (2) When reordering, specify LH or RH. (3) This brake is not FAA TSO approved order from airframe manufacturer only. (4) Uses Torque Plate Assy. for left hand brake and for right hand brake. 4-53

142 Brake Assembly 10 External Single Cylinder, Three Piston 30-28B, 30-28C, 30-28D, A, 30-68B Metallic Lining 4-54

143 Brake Assembly 10 External Single Cylinder, Three Piston 30-28B, 30-28C, 30-28D, 30-68, 30-68A, 30-68B Metallic Lining PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Cylinder Cylinder B 30-28C 30-28D A (1) (2) Piston Assembly Piston O-Ring (MS ) Insulator (4) Pressure Plate Assembly Pressure Plate Pin (5) Back Plate Assembly (6) Back Plate Assembly Back Plate Pin Lining Shim-Back Plate (3) Shim-Back Plate Bolt Bolt (AN4H15A) Bolt (AN4H16A) Washer (AN ) A Washer (AN L) Anchor Bolt Nut (MS21044-N4) Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring (MS ) Fitting (AN815-4D) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly B 4 NOTES: (1) Inactive assembly spares support only for parts listed. (2) 30-68A superseded by 30-68B. (3) Inactive part no longer available for spares support. (4) is the spares replacement for and includes items 5, 7, and 8. (5) is the spares replacement for and includes items 6, 7, and 8. (6) is the spares replacement for and includes items 6, 7, and

144 Brake Assembly 10 External Single Cylinder, Three Piston Metallic Lining PER ASSY. NOTES: (1) Use Torque Plate Assy. for left hand brake and for right hand brake. (2) When reordering, specify LH or RH. FIG. PART NO. DESCRIPTION (2) Cylinder Assembly Cylinder Piston Assembly Piston Friction Spring Insulator Piston Guide Stat-O-Seal Washer (AN960-10L) Bolt (AN3-5A) O-Ring (MS ) Pressure Plate Assembly Pressure Plate Pin Lining Back Plate Assembly Back Plate Pin Lining Shim-Insulator Bolt (AN5H-22A) Washer (AN ) Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring (MS ) Anchor Bolt Washer (AN L) Nut (MS21044-N5) Fitting (AN815-4D) 1 25 (1) Torque Plate Assembly

145 Brake Assembly 10 External Single Cylinder, Four Piston 30-84, 30-94, , LH, RH Organic Lining 4 Assy. Number A) B) C) (1) (2) D) LH (2) E) RH (2) NOTES: (1) This brake uses automotive type brake fluid. (2) This brake is not FAA TSO approved order from airframe manufacturer only. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E Cylinder Assy Cylinder Assy Cylinder Assy Cylinder O-Ring (MS ) O-Ring Piston Assy Piston Friction Spring Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Lining Rivet Anchor Bolt Nut (MS21044-N4) Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) O-Ring Torque Plate Assy Torque Plate Assy Torque Plate Assy Torque Plate Assy

146 Brake Assembly 10 External Single Cylinder, Four Piston 30-95, 30-95A, 30-95B, Metallic Lining 4-58

147 Brake Assembly 10 External Single Cylinder, Four Piston 30-95, 30-95A, 30-95B, 30-99, Metallic Lining PER ASSY (1) (2) (3) 30-95A (3) (4) 30-95B (3) (4) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Cylinder 1 (5) Cylinder Piston Assembly Piston Assembly Piston Assembly Piston Piston Friction Spring Insulator O-Ring (MS ) O-Ring (6) Pressure Plate Assembly (7) Pressure Plate Assembly Pressure Plate Pin-Lining Pin-Lining Lining Lining (8) Back Plate Assembly (9) Back Plate Assembly (10) Back Plate Assembly Back Plate Pin-Lining Pin-Lining Lining Lining Shim-Insulator Shim-Insulator Anchor Bolt Anchor Bolt Washer (AN L) Nut (MS21044-N4) Bolt (AN4-15A) Bolt Bolt (AN4H-21A) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) Torque Plate Assembly Torque Plate Assembly NOTES: (1) superseded by 30-95A LH. (2) Inactive assembly spares support only for parts listed. (3) Uses Torque Plate Assy. for left hand brake and Torque Plate Assy. for right hand brake. (4) When reordering, specify LH or RH. (5) Inactive part no longer available for spares support. (6) is the spares replacement for and includes items 6, 8, and 9. (7) is the spares replacement for and includes items 6, 8, and 9. (8) is the spares replacement for and includes items 7, 8, and 9. (9) is the spares replacement for and includes items 7, 8, and 9. (10) is the spares replacement for and includes items 7, 8, and

148 Brake Assembly 10 External Single Cylinder, Four Piston 30-97, , A Metallic Lining PER ASSY. NOTES: (1) Inactive assembly spares support only for parts listed. (2) superseded by A. (3) is the spares replacement for and includes items 5, 7, and 8. (4) is the spares replacement for and includes items 6, 7, and 8. FIG. PART NO. DESCRIPTION (1) (2) Cylinder Assembly Cylinder Piston Assembly Piston Friction Spring Insulator (3) Pressure Plate Assembly Pressure Plate Pin (4) Back Plate Assembly Back Plate Pin Lining Shim-Insulator Anchor Bolt Washer (AN L) Nut (MS21044-N5) Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) O-Ring (MS ) Fitting Torque Plate Assembly Torque Plate Assembly A 4-60

149 Brake Assembly 10 External Single Cylinder, Four Piston Metallic Lining 4 Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Cylinder Assy Cylinder O-Ring Piston Assy Piston Friction Spring Insulator Pressure Plate Assy Pressure Plate Back Plate Assy Back Plate Pin Rivet Lining Shim-Insulator Anchor Bolt Washer (AN ) Nut (MS ) Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) Fitting Torque Plate Assy

150 Brake Assembly 10 External Single Cylinder, Four Piston , Metallic Lining PER ASSY. NOTES: (1) When reordering, specify LH or RH. (2) is the spares replacement for and includes items 6, 7, and 8. (3) is the spares replacement for and includes items 7, 8, and 9. FIG. PART NO. DESCRIPTION (1) Cylinder Assembly Cylinder O-Ring (MS ) Piston Assembly Piston Insulator Friction Spring (2) Pressure Plate Assembly Pressure Plate Pin Lining (3) Back Plate Assembly Back Plate Pin Lining Anchor Bolt Washer (AN L) Nut (MS21044-N4) Shim-Insulator Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly Torque Plate Assembly

151 Brake Assembly 10 External Dual Cylinder, Dual Piston 30-67E Organic Lining 4 Assy. Number A) 30-67E PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Cylinder Assy Cylinder Piston Assy Piston O-Ring (MS ) Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Lining Rivet Anchor Bolt Nut (MS21044-N4) Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) Torque Plate Assy

152 Brake Assembly 10 External Dual Cylinder, Dual Piston , A, B, , A Metallic Lining FIG. PART NO. DESCRIPTION PER ASSY (1) (3) (12) A (1) (2) (4) (12) B (1) (3) (12) (1) (7) (10) (11) A (1) (2) (8) Cylinder Cylinder Piston Assembly Piston Assembly Piston (9) Piston Insulator O-Ring O-Ring O-Ring O-Ring O-Ring (MS ) O-Ring Pressure Plate Assembly Pressure Plate Pin Lining Rivet (Continued on next page) 4-64

153 Brake Assembly 10 External Dual Cylinder, Dual Piston , A, B, , A Metallic Lining (Continued from previous page) PER ASSY. FIG. PART NO. DESCRIPTION (1) (3) (12) A (1) (2) (4) (12) B (1) (3) (12) (1) (7) (10) (11) A (1) (2) (8) Back Plate Assembly Back Plate Pin Lining Rivet Shim-Insulator Anchor Bolt Washer (AN ) Washer (AN L) Nut (MS21044-N5) Bolt Bolt Washer (AN L) Washer (AN ) A Washer (AN L) Bolt 4 4 (9) Bolt (9) Washer (9) Guide-Spring (9) Washer-Bellville Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring O-Ring (6) Fitting Fitting Fitting Hose Assembly-Link Hose Assembly-Link Torque Plate Assembly Torque Plate Assembly (5) (9) Stud Assembly NOTES: (1) Inactive assembly spares support only for parts listed. (2) Used Skydrol Fluid. (3) Brake Upgrade Kit converts or B to C. TSO approved per PRM 36. (4) A Brake Upgrade Kit converts A to D. TSO approved per PRM 38. (5) Stud Assy. replaced by items 17, 18 and 19 after 11/83. (6) O-ring is part of Fitting Assy. For replacement O-ring, order P/N (7) superseded by B. (8) A superseded by C. (9) Inactive part no longer available for spares support. (10) Brake Retract Kit retrofits brake to use new style retracts. TSO approved per PRM 49. (11) Brake Retract Kit same as , except does not include new cylinders and pistons. (12) Refer to SB7098 for inspection of brake pistons. 4-65

154 Brake Assembly 10 External Dual Cylinder, Dual Piston C, D, E, B, C Metallic Lining PER ASSY. NOTES: (1) O-ring is part of Fitting Assy. For replacement O-ring, order P/N (2) Uses Skydrol Fluid. (3) Refer to SB7098 for inspection of brake pistons C (3) D (2) (3) E (3) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Assembly Cylinder Subassembly, Leading Cylinder Subassembly, Trailing Cylinder Cylinder Piston Assembly Piston Assembly Piston Assembly Piston Assembly Piston Piston Instulator O-Ring O-Ring O-Ring O-Ring O-Ring (MS ) O-Ring 4 (Continued on next page) B C (2) 4-66

155 Brake Assembly 10 External Dual Cylinder, Dual Piston C, D, E, B, C Metallic Lining (Continued from previous page) PER ASSY. FIG. PART NO. DESCRIPTION C (3) D (2) (3) E (3) B C (2) Pressure Plate Assembly Pressure Plate Pin-Lining Lining Rivet Back Plate Assembly Back Plate Pin-Lining Lining Rivet Shim-Insulator Anchor Bolt Washer (AN ) Nut (MS21044-N5) Bolt Bolt Washer (AN ) Stud Assembly Stud Friction Sleeve Friction Sleeve Bolt Spacer Cup Assembly Cup Disc Spring Washer Snap Ring Lockwire (MS20995C32) AR AR AR AR Lockwire (MS20995C32) AR Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring O-Ring Fitting (1) Fitting (1) Fitting Hose Assembly Link Hose Assembly Inlet Torque Plate Assembly Torque Plate Assembly Retract Stud Assembly Return Collar Spring Friction Ring Friction Pin

156 Brake Assembly 10 External Dual Cylinder, Dual Piston , Metallic Lining Assy. Number A) B) NOTES: (1) Illustrated assembly is PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Cylinder Assy Cylinder Assy Cylinder Cylinder Piston Assy Piston Assy Piston Piston Insulator Friction Piston Guide Stat-O-Seal Washer (AN960-10L) Bolt (AN3-5A) O-Ring O-Ring (MS ) Pressure Plate Assy Pressure Plate Lining Pin Back Plate Assy Back Plate Shim-Insulator Anchor Bolt Washer (AN L) Nut (MS21044-N5) Washer (AN L) Washer (AN ) Bolt (AN5H-22A) Bleeder Seat Bleeder Screw Bleeder Cap O-Ring (MS ) Fitting Hose Assy Torque Plate Assy

157 Brake Assembly 10 External Dual Cylinder, Dual Piston , A, B Metallic Lining 4 PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Cylinder Piston Assembly Piston Assembly Piston Insulator Friction Spring Piston Guide Washer (AN960-10) Stat-O-Seal Bolt (AN3-7A) O-Ring Pressure Plate Assembly Pressure Plate Pin Rivet Lining Back Plate Assembly Back Plate Pin Rivet Lining A B PER ASSY. FIG. PART NO. DESCRIPTION Shim-Insulator Bolt Washer (AN ) Washer (AN L) Anchor Bolt Anchor Bolt Anchor Bolt Bolt Washer (AN ) Nut (MS21044-N5) Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring Fitting O-Ring Fitting O-Ring Fitting O-Ring Hose Assembly Torque Plate Assembly Torque Plate Assembly A B 4-69

158 Brake Assembly 10 External Dual Cylinder, Three Piston 30-98, 30-98A, 30-98B, 30-98C, 30-98D Organic Lining Assy. Number A) B) 30-98A (1) C) 30-98B D) 30-98C E) 30-98D NOTES: (1) This brake uses automotive type brake fluid. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E Cylinder Assy Cylinder Assy Cylinder Assy Cylinder Piston Assy Piston Friction Spring Pressure Plate Assy Pressure Plate Lining Rivet Back Plate Assy Back Plate Lining Rivet Anchor Bolt Nut (MS21044-N4) Bolt Washer (AN ) Cap-Bleeder Screw-Bleeder Seat-Bleeder Fitting (AN815-4D) O-Ring (MS ) O-Ring O-Ring O-Ring (MS ) Hydraulic Line Assy.-Inlet Fitting (AN837-4D) Nut (AN924-4D) Torque Plate Assy Torque Plate Assy Torque Plate Assy

159 Brake Assembly 10 External Dual Cylinder, Three Piston , Metallic Lining 4 PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Piston Assembly Piston O-Ring (MS ) Insulator Friction Spring (1) Pressure Plate Assembly Pressure Plate Pin (2) Back Plate Assembly Back Plate Pin Lining Shim PER ASSY. FIG. PART NO. DESCRIPTION Anchor Bolt Nut (MS21044-N4) Washer (AN L) Bolt Washer (AN ) Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring (MS ) Fitting Fitting (AN815-4D) Hose Assembly Hose Assembly, Inlet Torque Plate Assembly Torque Plate Assembly NOTES: (1) is the spares replacement for and includes items 6, 8, and 9. (2) is the spares replacement for and includes items 7, 8, and

160 Brake Assembly 10 External Dual Cylinder, Three Piston , Metallic Lining FIG. PART NO. DESCRIPTION Cylinder Assembly 2 PER ASSY Cylinder Assembly Cylinder Cylinder Piston Assembly Piston Assembly Piston O-Ring (MS ) Insulator Friction Spring (1) Pressure Plate Assembly Pressure Plate Pin (2) Back Plate Assembly Back Plate Pin Lining PER ASSY. FIG. PART NO. DESCRIPTION Shim Anchor Bolt Anchor Bolt Nut (MS21044-N4) Bolt Bolt Washer (AN ) Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring (MS ) Fitting (AN815-4D) Fitting Hose Assembly Hose Assembly Torque Plate Assembly Torque Plate Assembly 1 NOTES: (1) is the spares replacement for and includes items 6, 8, and 9. (2) is the spares replacement for and includes items 7, 8, and

161 Brake Assembly 10 External Dual Cylinder, Four Piston , Metallic Lining 4 PER ASSY. FIG. PART NO. DESCRIPTION (1) Cylinder Assembly (1) Cylinder 1 1 1A (2) Cylinder Assembly (2) Cylinder Piston Assembly Piston Insulator Friction Spring (4) Back Plate Assembly Back Plate Pin (3) Pressure Plate Assembly Pressure Plate Pin Lining PER ASSY. FIG. PART NO. DESCRIPTION Shim-Insulator Bolt (AN4H23A) Washer (AN ) Anchor Bolt Nut (MS21044-N4) Washer (AN L) Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (MS ) O-Ring (MS ) Fitting Hose Assembly Torque Plate Assembly Torque Plate Assembly NOTES: (1) Cylinder Assembly leads on LH Gear, trails on RH Gear. (2) Cylinder Assembly trails on LH Gear, leads on RH Gear. (3) is the spares replacement for and includes items 6, 7, and 8. (4) is the spares replacement for and includes items 5, 7, and

162 Brake Assembly 12 External Single Cylinder, Four Piston Metallic Lining Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Cylinder Assy Cylinder Boot-Piston O-Ring (MS ) Piston Assy Piston Insulator Friction Spring Pressure Plate Assy Pressure Plate Rivet Pin Lining Back Plate Assy Back Plate Rivet Pin Lining O-Ring (MS ) Bleeder Cap Bleeder Screw Bleeder Seat Fitting Bolt (MS21250H04036) Bolt (MS21250H04024) Washer (MS20002-C4) Shim-Backplate Anchor Bolt Nut (MS ) Washer (AN ) Torque Plate Assy

163 Brake Assembly 12 External Dual Cylinder, Four Piston , A Organic Lining NOTES: (1) SB Service Bulletin Kit upgrades brake to A configuration per SB7067. (2) Component of Cylinder Assembly for A. (3) Includes all parts except Torque Plate Assembly. FIG. PART NO. DESCRIPTION (3) Cylinder Assembly 2 PER ASSY Cylinder Assembly (2) Cylinder (2) O-Ring (MS ) (2) Piston (2) Pressure Plate Assembly Pressure Plate Rivet Lining (2) Back Plate Assembly Back Plate Rivet Lining O-Ring (MS ) Bleeder Cap Bleeder Screw Bleeder Seat Fitting Fitting O-Ring Hose Assembly (2) Bolt (MS21250H04036) (2) Bolt (MS21250H04024) (2) Washer (MS20002-C4) Anchor Bolt (2) Anchor Bolt (2) Nut (MS ) (2) Washer (AN ) Torque Plate Assembly (1) A

164 Brake Assembly 8 Internal Single Cylinder, Three Piston , A Metallic Lining Assy. Number A) (1) (2) B) A NOTES: (1) Inactive assembly spares support only for parts listed. (2) Superseded by A per SB7039. (3) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Cylinder Insert Piston O-Ring Backup Ring (3) Insulator Insulator 3 7 (3) Lining Lining 2 8 (3) Brake Disc Brake Disc Back Plate Bolt (MS ) Washer (MS20002C5) Fitting (AN815-4D) Bleeder Seat Bleeder Screw Bleeder Cap O-Ring (MS ) Nut (MS E) Washer (AN )

165 Brake Assembly 8 Internal Single Cylinder, Four Piston LH, RH Metallic Lining 4 Assy. Number A) LH (1) (2) B) RH (1) (2) NOTES: (1) Used with Wheel Assemblies. (2) This Brake is not FAA TSO approved order from airframe manufacturer only. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Cylinder Assy Cylinder Piston O-Ring (MS ) Insulator Screw (AN ) Lining Indicator Pin Spring Retaining Ring Torque Plate Torque Plate Anchor Bolt Washer (AN C) Nut (MS S) Bolt (AN4-27A) Washer (AN ) Nut (AN C) Back Plate Assy Back Plate Wear Pad Rivet Rivet Disc Stator Pressure Plate Assy Pressure Plate Wear Pad Rivet O-Ring (MS ) Bleeder Seat Bleeder Screw Bleeder Cap

166 Brake Assembly 8 Internal Single Cylinder, Six Piston A, B Metallic Lining PER ASSY. NOTES: (1) Brake Friction Stack Kit provides the components for the replacement of wearable friction stack components A FIG. PART NO. DESCRIPTION Cylinder Assembly B (1) Cylinder Assembly Cylinder Piston Assembly Piston Insulator O-Ring (MS ) Torque Plate Pressure Plate (1) Pressure Plate Disc (1) Disc Center Stator (1) Center Stator Back Plate Bolt (MS ) Washer (MS20002-C5) Washer (MS ) Nut (MS21042-L5) Fitting (AN815-4D) O-Ring Cap-Bleeder Screw-Bleeder Seat-Bleeder O-Ring (AN6227-7) Spacer

167 Brake Assembly 8 Internal Single Cylinder, Six Piston Metallic Lining 4 PER ASSY FIG. PART NO. DESCRIPTION Cylinder Subassembly Piston Insulator O-Ring (MS ) Wiper Ring Pressure Plate Assy Pressure Plate Wear Pad Rivet (MS ) Disc Torque Tube Subassembly Torque Tube Wear Pad Rivet (MS ) 32 PER ASSY FIG. PART NO. DESCRIPTION Bolt (MS ) Washer (MS ) Torque Liner Screw (MS ) O-Ring (MS ) Elbow (AN837-4D) Bleeder Seat Bleeder Screw Bleeder Cap Nut (AN924-4D)

168 Brake Assembly 10 Internal Single Cylinder, Five Piston Metallic Lining PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Piston O-Ring (MS ) Insulator Torque Ring Lining Indicator Pin Retaining Ring Lining Indicator Seat Pressure Plate Assembly Pressure Plate Wear Pad Rivet (NASM ) Disc Stator PER ASSY. FIG. PART NO. DESCRIPTION Back Plate Assembly Back Plate Wear Pad Rivet (NASM ) Bolt (MS ) Washer (MS20002C5) Nut (MS S) Plug (AN814-4) O-Ring (MS Bleeder Seat Bleeder Screw Bleeder Cap Washer (AN )

169 Brake Assembly 10 Internal Single Cylinder, Five Piston , A Metallic Lining Assy. Number A) (1) (3) B) A NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support. (3) Refer to Service Bulletin SB7041 for upgrade to A. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Cylinder Piston O-Ring (MS ) Insulator Pressure Plate Assy Pressure Plate Wear Pad Rivet (2) Disc Disc Stator Assy Stator Wear Pad Rivet Back Plate Assy Back Plate Wear Pad Rivet Torque Ring Bolt (MS ) Washer (MS20002C5) Bleeder Seat Bleeder Screw O-Ring (MS ) Plug (AN814-4) Adjuster Assy Stud Friction Sleeve Sleeve Retainer Spacer Washer (MS ) Snap Ring Spring Retract Base Assy Insert Retract Base

170 Brake Assembly 10 Internal Single Cylinder, Six Piston Metallic Lining Assy. Number A) NOTE: (1) Indicated assemblies have lining permanently bonded. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Cylinder Assy Cylinder Piston O-Ring (MS ) Insulator Bolt (MS ) Washer (MS20002C5) Pressure Plate Assy Pressure Plate Wear Pad Rivet (MS ) Disc Assy (1) Stator Assy Stator Wear Pad Rivet (MS ) Torque Plate Back Plate Assy Back Plate Wear Pad Rivet (MS ) Nut-Lock (MS ) Bleeder-Seat Bleeder-Screw Bleeder-Cap O-Ring (MS ) Washer (AN L)

171 This page intentionally left blank

172 Brake Assembly 10 Internal Single Cylinder, Six Piston , A, , , A Metallic Lining 4-84

173 30-189, A, , , A Metallic Lining Brake Assembly 10 Internal Single Cylinder, Six Piston PER ASSY (1) (2) (6) A (7) (7) (1) (3) (5) (6) FIG. PART NO. DESCRIPTION Cylinder Assembly Cylinder Assembly Bushing Bushing Piston Insulator (4) Insulator O-Ring (NAS ) A (7) Wiper Ring Torque Liners Screw (AN501A10-6) Pressure Plate Assembly Wear Pad Rivet Center Stator Assembly Wear Pad Rivet Torque Plate Assembly A (4) Torque Plate Assembly Wear Pad Rivet (4) Back Plate Assembly Wear Pad Rivet Disc (4) Disc Bolt (MS21250H05022) A (4) Bolt Washer (Countersunk) (MS20002C5) A (4) Washer (Countersunk) (4) Washer (4) Nut Bleeder Seat O-Ring Plug (AN814-4K) O-Ring (NAS1612-4A) Bleeder Screw Bleeder Cap Shuttle Valve Assembly (4) Shuttle Valve Assembly O-Ring (NAS ) O-Ring Retract Assembly Retract Housing Assembly Retract Housing Washer (MS ) Snap Ring Spring Adjuster Assembly Retract Base Assembly Fitting (AN815-4K) NOTES: (1) Inactive Assembly - spares support only for parts listed. (2) has been superseded by A (3) has been superseded by A (4) Inactive Part - no longer available for spares support. (5) Brake Retract Kit retrofits brake to use improved retracts. (6) Brake Upgrade Kit converts brake to A and to A. TSO approved per ESB7018 & ESB7022. (7) Brake Bolt Kit retrofits brake assembly to use safety wired bolts. TSO approved per ESB

174 Brake Assembly Brake Assembly 10 Internal Single Cylinder, Six Piston Metallic Lining PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Assembly Piston O-Ring (MS ) Wiper Insulator Pressure Plate Assembly Wear Pad Rivet Rotor Stationary Disc Assembly Wear Pad Rivet Torque Tube Assembly Wear Pad Rivet Bolt (MS ) Washer (MS ) Nut (NAS1804-4N) 6 NOTE: (1) kit contains six extreme temperature/dusty condition wipers (P/N ) in lieu of the six reduced drag wipers (P/N ) used in kit A PER ASSY. FIG. PART NO. DESCRIPTION Bolt (MS ) Washer (MS20002C6) Nut (NAS1804-6N) Retract Subassembly Spring Washer (MS ) Ring, Retaining Retract Base Assembly Packing, Preformed (MS ) Seat, Bleeder Bleeder Washer Screw, Bleeder Fitting, Inlet (AS1038J0404) Nut, Fitting (AN924-4J) (1) Brake Overhaul Kit (items 3, 7, 9, 11, 12, 14, 15, 27, 30, and a nameplate) A Brake Overhaul Kit (items 3, 4, 7, 9, 11, 12, 14, 15, 27, 30, and a nameplate)

175 This page intentionally left blank

176 Brake Assembly 10 Internal Dual Cylinder, Dual Piston Organic Lining 4-88

177 Brake Assembly 10 Internal Dual Cylinder, Dual Piston Organic Lining PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Cylinder Assy Cylinder Piston Assy Piston O-Ring (MS ) Bolt-Spring Spring-Retract Ring-Friction O-Ring (MS ) Nut (NASM21083N3) Torque Plate Lining - Torque Plate Plate-Carrier Lining -Carrier Plate Back Plate Lining - Back Plate Cylinder Shim Disc-Brake Neoprene Shim Spacer Bolt (AN6H-25A) Washer (AN ) Bolt (AN4H-26A) Washer (AN ) Fitting (MS D) Fitting (MS D) Cap-Bleeder Screw-Bleeder Seat-Bleeder Hydraulic Line Assy Spacer Screw (MS ) 2 Assy. Number A) NOTE: (1) Used with Wheel Assembly

178 Brake Assembly 16 Internal Dual Cylinder, Two or Three Piston 30-91, , Organic Lining 4-90

179 30-91, , Organic Lining PER ASSY. Brake Assembly 16 Internal Dual Cylinder, Two or Three Piston (1) FIG. PART NO. DESCRIPTION Cylinder Assembly (2) (3) Cylinder Assembly Cylinder (3-piston) 2 2 1A Cylinder (2-piston) O-Ring (MS ) O-Ring Boot-Piston Piston Assembly Piston Assembly Piston A Friction Spring Friction Spring Pressure Plate Assembly Pressure Plate Assembly Pressure Plate Pressure Plate Lining Rivet Back Plate Back Plate Anchor Pin Bolt (MS ) Bolt (AN6-30A) Bolt (AN7-34A) Nut (MS2142-6) 6 12A Nut (AN ) B Nut (MS21044-N5) Washer-Seal 12 13A Washer (MS20002C5) 4 13B Washer (AN ) 4 13C Washer (AN ) 12 13D Washer-Seal 8 20 * Bushing Bushing Seat-Bleeder Screw-Bleeder Cap-Bleeder O-Ring O-Ring (MS ) Nut (AN924-4D) Fitting (AN833-4D) Fitting (AN784D4) Fitting (AN804D4) Hydraulic Line Assembly Hydraulic Line Assembly Torque Plate Assembly Torque Plate Assembly Brake Disc Brake Disc NOTES: (1) This brake uses automotive type brake fluid. (2) superseded by (3) Inactive assembly spares support only for parts listed. * Not illustrated

180 Notes 4-92

181 Part Number Index Wheel Assembly All SECTION 5 Note! Unless otherwise noted, listed Wheels and Brakes are FAA TSO C26 Approved. For a product to be TSO qualified, it has to have successfully demonstrated its ability to meet minimum performance standards in accordance with FAA recognized rating methods. The TSO approval of a product does not constitute installation approval or applicability on an FAA Type Certificated Aircraft. It is the responsibility of those installing these products to determine that the aircraft installation and its wheel and brake performance requirements are compatible for the TSO ratings of the wheel and brake. TSO approved products must have separate approval for installation in a FAA type certificated aircraft. TSO Approved Products may be installed only if performed under Title 14 CFR Part 43 or the applicable airworthiness requirements D (40-2), D (40-1), , A, , , A , , , D, A, , , A, B, C, D, , , , , B, C , A, D, E , A, , A, B B, D, E, F, G, H, J, P, S, T, W, Z A, B, C, D, E, F, G, H P, , A, B, C, D, E, F, G, H, , A, B, E, J, A, , A, B, , A, B , A, B, E, F, , A, C, D, F, G, H, C , A, B, D, E, F A, E, A, B, C, D, E, F, , A, D, E, F, G, H, N, P, , A, D, E, , A, , A , A, A, , B, , A , A, B C, X , A, B, C A , A, C, , , , C, D, E , ,

182 Part Number Index , , , A, , A , A , , A, C , A , , , A, , , , , A, B, , , , A, , A, B, C , , A , , , , , A, , A, AA , , A, B , A , A , , A , A, B, C , A , , (40-6), (40-7), A (40-7A) ) A (40-3), B (40-4), D (40-116), (40-8), Wheel Assembly All C , C-30179, C D-30204, D-30255, D-30260, D , D , D , D , D , D , D D D-30500, D D-30570, D D D , D , D , D , D D , D , D , D , D D-30665, D

183 Wheel Assembly Dolly 4.10/ , A Tube-Type 5 Assy. Number A) (1) B) A (1) NOTES: (1) Service equipment only these wheels are not FAA-TSO approved. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Inner Wheel Half Assy Inner Wheel Half Assy Bearing O-Ring Outer Wheel Half Assy Outer Wheel Half Assy Bearing O-Ring Grease Fitting Bolt (AN4-10A) Washer (AN L) Nut (MS21044-N4)

184 Wheel Assembly Dolly Tube-Type Assy. Number A) (1) (2) NOTES: (1) Service equipment only these wheels are not FAA TSO approved. (2) Inactive assembly spares support only for parts listed. (3) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A 1 (3) Inner Wheel Half Assy Cup-Bearing 1 3 (3) Outer Wheel Half Assy Cup-Bearing Bolt (AN4-35A) Nut (MS21044-N4) Washer (AN L) Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Snap Ring Cone-Bearing 2 5-4

185 Wheel Assembly Dolly Tubeless 5 Assy. Number A) (1) NOTES: (1) Service equipment only this wheel is not FAA-TSO approved. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup Bearing Cone-Bearing-Inboard Outer Wheel Hald Assy Cup Bearing Cone-Bearing-Outboard Bolt (MS ) Washer (MS ) Nut Seal, Bearing-Inboard Seal, Bearing-Outboard Ring, Retaining-Inboard Ring, Retaining-Outboard Packing, Preformed Valve Assy, Inflation Plug Preformed Packing (MS ) 1 5-5

186 Wheel Assembly Tail S.C./4-1/2 x 12-1/ , Tube-Type Assy. Number A) (1) (3) B) (2) (4) NOTES: (1) Size S.C. (2) Size 4-1/2 x 12-1/2 (3) Fits 5/8" axle (4) Fits 1" axle PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Wheel Body Assy Cup-Bearing Cone-Bearing Ring-Grease Seal Grease Seal Snap Ring Flange-Wheel Ring-Lock Grommet Bolt (AN4-47A) Washer (AN ) Nut-Lock (MS21044-N4) Cone-Bearing Ring-Grease Seal Felt-Grease Seal Snap Ring 2 5-6

187 Wheel Assembly Tail 10 x , A Tube-Type 5 PER ASSY. NOTES: (1) This wheel is not FAA-TSO approved order from airframe manufacturer only. (2) Additional tire sizes: 4.10/3.50-4, 2.80/2.50-4, 8 x (3) Fits 5/8" axle. (4) Fits 1/2" axle (1) (2) (3) A (1) (2) (4) FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Bearing Cup Bearing Cup Outer Wheel Half Assembly Outer Wheel Half Assembly Bearing Cup Bearing Cup Bolt (AN4-23A) Washer (AN ) Nut (MS21044-N4) Bearing Cone Bearing Cone Grommet Grease Seal Grease Seal Ring Snap Ring

188 Wheel Assembly Tail 2.75 x 4.00 D Tube-Type Assy. Number A) D NOTES: (1) All wheel assemblies were formerly manufactured by McCauley Industrial Corporation. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Wheel Half Assy Bearing Bolt (AN4-7A) Washer (AN L) Nut Spacer Gasket 1 5-8

189 Wheel Assembly Tail Tube-Type 5 Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Grommet Bolt (AN4-22A) Washer (AN ) Nut (MS ) Cone-Bearing Spacer Grease Seal-Molded Ring-Grease Seal Screw-F.H. Cap (AN ) Washer-Lock (MS ) Fitting-Grease O-Ring (MS ) 1 5-9

190 Wheel Assembly Nose D (40-2), 40-18, 40-33, A, AA Tubeless PER ASSY. NOTES: (1) Use tubeless tire with needle inflation. (2) Inactive assembly spares support only for parts listed. (3) superseded by (4) Inactive part no longer available for spares support. (5) Upgrade kit available for upgrade of A to AA. Refer to SB D (40-2) (1) (2) (1) (2) (2) (3) FIG. PART NO. DESCRIPTION Outer Wheel Half Assembly Outer Wheel Half Assembly 1 1 (4) Outer Wheel Half Assembly Cup-Bearing Cup-Bearing Inner Wheel Half Assembly Inner Wheel Half Assembly 1 1 (4) Inner Wheel Half Assembly Cup-Bearing Cup-Bearing O-Ring (MS ) O-Ring (MS ) Bolt (AN4-31A) Bolt Bolt (MS Washer (AN ) Washer (MS ) Washer (MS Nut (NAS ) Nut Nut Ring-Grease Seal Ring-Grease Seal Snap Ring Felt-Grease Seal Felt-Grease Seal Felt-Grease Seal Cone-Bearing Cone-Bearing Air Valve (MS ) A (5) AA 5-10

191 Wheel Assembly Nose , 40-77A, 40-77B, 40-77G, 40-77H, 40-87, 40-87A, 40-87C, 40-87D, 40-87F, 40-87G, 40-87H, Tube - Type , NOTES: (1) Tie Bolt/Overhaul Kit is available for this wheel. Refer to PRM ,11 (2) Tie Bolt/Overhaul Kit is available for this wheel. Refer to PRM94. (3) Tie Bolt/Overhaul Kit is available for this wheel. Refer to PRM86. PER ASSY (3) 40-77A (1) FIG. PART NO. DESCRIPTION Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Grommet Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Bolt (AN4-22A) Bolt (NAS ) Bolt (MS ) Washer (AN ) Washer (MS ) Nut (NAS ) Nut (MMS S) Nut Ring-Grease Seal Ring-Grease Seal Snap Ring Felt-Grease Seal Felt-Grease Seal Cone-Bearing Spacer Grommet Molded Grease Seal B (2) 40-77G 40-77H A 40-87C 40-87D 40-87F 40-87G 40-87H

192 Wheel Assembly Nose C, 40-77D, 40-77E, 40-77F, Tube-Type PER ASSY. NOTES: (1) Inactive assembly spares support only for parts listed. (2) 40-77E supersedes 40-77D. (3) Inactive part no longer available for spares support. (4) Tiebolt Service Kit is available for this wheel. Refer to PRM 83. (5) Tiebolt Service Kit is available for this wheel. Refer to PRM 83. (6) Tiebolt Service Kit is available for this wheel. Refer to PRM C (4) 40-77D (1) (2) 40-77E (5) 40-77F (6) FIG. PART NO. DESCRIPTION Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Cup-Bearing Grommet Inner Wheel Half Assy Inner Wheel Half Assy Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Cup-Bearing Bolt (AN4-22A) Washer (AN L) Washer (AN ) Nut (MS ) Nut (MS21044-N4) Ring-Grease Seal Snap Ring Felt-Grease Seal 2 2 (3) Felt-Grease Seal Molded Grease Seal Cone-Bearing Cone-Bearing

193 Wheel Assembly Nose , B, , A, B, C Tube-Type PER ASSY. 5 NOTES: (1) Inactive Assembly - spares support only for parts listed. (2) B supersedes and A B (1) A (1) B (2) FIG. PART NO. DESCRIPTION Inner Wheel Half Assy Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Grommet Bolt (AN4-22A) Bolt (MS ) Washer (AN ) Washer (MS20002C4) Nut (MS ) Nut (MS21044-N4) Nut (MS S) Cone-Bearing Ring-Grease Seal Felt-Grease Seal Molded Grease Seal Snap Ring C 5-13

194 Wheel Assembly Nose C , C Tube-Type PER ASSY. NOTES: (1) All wheel assemblies listed were formerly manufactured by McCauley Industrial Corporation. (2) Inactive assembly spares support only for parts listed. (3) Superseded by D (4) Inactive part no longer available for spares support. FIG. PART NO. DESCRIPTION C (2) (3) C (2) (3) 1 (4) Hub Assembly 1 (4) Hub Assembly 1 2 (4) Bearing (4) Wheel Flange 2 (4) Wheel Flange 1 4 (4) Wheel Flange 1 5 (4) Spacer (4) Bolt 6 6A (4) Screw 12 7 (4) Washer Washer (AN ) Ring (4) Felt Snap Ring

195 Wheel Assembly Nose D-30500, D Tube-Type 5 NOTES: (1) All wheel assemblies listed were formerly manufactured by McCauley Industrial Corporation. (2) Inactive assembly - spares support only for parts listed. (3) Superseded by per PRM 88. (4) Superseded by 40-87H per PRM 88. (5) Inactive part - no longer available for spares support. PER ASSY. D (2)(3) D (2)(4) FIG. PART NO. DESCRIPTION 1 (5) Wheel Half Assembly 2 (5) Wheel Half Assembly Cup-Bearing Cup-Bearing Cone-Bearing Cone-Bearing Bolt Washer (AN ) Nut Ring Felt Snap Ring

196 Wheel Assembly Nose (40-8), 40-30A, 40-55, 40-76A, 40-76B, 40-76C, 40-76P, B Tube-Type 5-16

197 Wheel Assembly Nose (40-8), 40-30A, 40-55, 40-76A, 40-76B, 40-76C, 40-76P, B Tube-Type PER ASSY. FIG. 1 PART NUMBER (40-8) DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly 1 (4) Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly A (1) (2) 40-76A (3) Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly 1 3 (4) Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Bolt (AN4-36A) Bolt (AN4-37A) Bolt (AN4-35A) Nut (MS21044-N4) Nut (MS21044-N5) Washer (AN ) Washer (AN ) Ring-Grease Seal Ring-Grease Seal 3 7A Plate-Grease Seal-Inner Wheel Half 1 7B Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal 2 9A Felt-Grease Seal-Inner Wheel Half 1 9B Felt-Grease Seal-Outer Wheel Half Felt-Grease Seal Screw (AN ) Washer-Lock (MS ) Washer-Lock (AN936A8) Snap Ring Cone-Bearing Molded Grease Seal Molded Grease Seal Molded Grease Seal B 40-76C 40-76P B 5 NOTES: (1) Inactive assembly spares support only for parts listed. (3) 40-76A supersedes 40-76H.. (2) 40-76A supersedes (4) Inactive part - no longer available for spares support. 5-17

198 Wheel Assembly Nose , 40-56B, 40-76D, 40-76E, 40-76F, 40-76G, 40-76H Tube-Type PER ASSY. FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Cup-Bearing Bolt (AN5-35A) Bolt (AN5-34A) Nut (MS21044-N5) Washer (AN ) Ring-Grease Seal Snap Ring Cone-Bearing Cone-Bearing Molded Grease Seal Molded Grease Seal Molded Grease Seal B 40-76D 40-76E 40-76F 40-76G 40-76H 5-18

199 Wheel Assembly Nose C Tube-Type 5 Assy. Number A) 40-56C PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Bolt (AN5-34A) Washer (AN ) Nut (MS21044-N5) Molded-Grease Seal Snap Ring Cone-Bearing

200 Wheel Assembly Nose A, , A, C Tube-Type PER ASSY. FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Cup-Bearing Bolt (AN5-35A) Washer (AN ) Washer (AN L) Nut (MS S) Nut (MS21044-N5) Cone-Bearing Cone-Bearing Ring-Grease Seal Molded Grease Seal Molded Grease Seal Molded Grease Seal Snap Ring Grease Fitting (MS ) A A C 5-20

201 Wheel Assembly Wheel Assembly Nose Tubeless 5 PER ASSY. FIG. PART NO. DESCRIPTION Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Bolt (MS ) Washer (MS ) Nut, Self-locking (NAS1804-5N) Cone-Bearing Packing, Preformed (MS ) Seal, Bearing Ring, Retaining Assembly, Inflation Valve Disc, Rupture

202 Wheel Assembly Wheel Assembly Nose , A Tube-Type PER ASSY. NOTES: (1) High corrosion resistant, amphibious equipment (1) FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing (chrome plated) Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing (chrome plated) Cup-Bearing Grease Dam Spacer Bolt (AN5-35A) Washer (AN ) Nut (MS ) Cone-Bearing (chrome plated) Cone-Bearing Molded Grease Seal Snap Ring A 5-22

203 Wheel Assembly Wheel Assembly Nose C-30179, D-30204, D-30255, D-30570, D Tube-Type Assy. Number A) C (1) B) D (1) (2) C) D (1) (2) D) D (1) E) D30585 (1) (2) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Superseded by D (5). (3) Inactive part no longer available for spares support. (4) All wheel assemblies listed were formerly manufactured by McCauley Industrial Corporation. (5) D is inactive. See Airframe manufacturer for approved replacement. * Not illustrated. PART QTY. PER ASSY FIG. NUMBER DESCRIPTION A B C D E Hub Assy. 1 1 (3) Hub Assy Hub Assy Hub Assy. 1 2 (3) Bearing (3) Bearing 2 (3) Wheel Flange 1 (3) Wheel Flange 1 3 (3) Wheel Flange 1 (3) Wheel Flange 1 (3) Wheel Flange 1 (3) Wheel Flange 1 (3) Wheel Flange 1 4 (3) Wheel Flange 1 (3) Wheel Flange 1 (3) Wheel Flange Spacer (3) Screw 12 6 (3) Bolt (AN4-41A) 6 (3) Screw Screw Washer (AN ) (3) Washer 12 (3) Washer Ring Ring Felt Snap Ring Snap Ring 2 2 * Nut

204 Wheel Assembly Wheel Assembly Nose D-30665, D Tube-Type Assy. Number A) D (2) (3) B) D (2) (3) NOTES: (1) All wheel assemblies listed were formerly manufactured by McCauley Industrial Corporation. (2) Inactive assembly spares support only for parts listed. (3) Inactive. See Airframe manufacturer for approved replacement. (4) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B 1 (4) Inner Wheel Half Assy. 1 (4) Inner Wheel Half Assy Cup-Bearing Cone-Bearing (4) Outer Wheel Half Assy. 1 (4) Outer Wheel Half Assy Cup-Bearing Bolt Bolt Washer (AN ) Washer (MS20002C5) Washer (MS20002C5) Washer (AN L) Nut Ring Felt Ring Snap Ring

205 Wheel Assembly Wheel Assembly Nose Tubeless 5 Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Cone-Bearing Outer Wheel Half Assy Cup-Bearing Cone-Bearing Bolt (MS ) Washer (MS20002C5) Washer (MS ) Nut-Lock (MS21044-N5) Molded Grease Seal Snap Ring Air Valve Assy Valve Extension O-Ring (MS )

206 Wheel Assembly Wheel Assembly Nose 16 x Tubeless Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Outer Wheel Half Assy Cup-Bearing Inner Wheel Half Assy Cup-Bearing Cone-Bearing Bolt (MS ) Washer (MS ) Nut Grease Seal Snap Ring O-Ring (MS ) Air Valve Assy

207 Wheel Assembly Wheel Assembly Nose Tubeless (1)/Tube-Type 5 NOTES: (1) Tubeless tire configuration requires the use of optional inflation air valve assembly. Inflation air valve assembly must be ordered separately. FIG. PART NO. DESCRIPTION PER ASSY Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Cup-Bearing Cone-Bearing Bolt (MS ) Washer (MS ) Nut (NAS1804-4N) Seal Snap Ring Preformed Packing (1) Inflation Air Valve Assembly

208 Wheel Assembly Wheel Assembly Nose A Tube-Type Assy. Number A) A PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Bolt (AN5-35A) Washer (AN ) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal Snap Ring Molded Grease Seal Molded Grease Seal

209 Wheel Assembly Wheel Assembly Nose A, Tube-Type 5 Assy. Number A) A B) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Bolt (AN5-35A) Washer (AN ) Nut (MS21044-N5) Cone-Bearing Molded Grease Seal Molded Grease Seal Snap Ring Spacer-Axle

210 Wheel Assembly Wheel Assembly Nose 18 x Tubeless Assy. Number A) NOTES: (1) Optional balance kit available for use with this wheel. (2) Washer is installed under the bolt head. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Bearing-Cone & Seal Bolt (MS ) Washer (MS20002C5) (2) Washer (MS ) Nut-Lock (MS S) Air Valve O-Ring (MS ) Axle Spacer

211 Wheel Assembly Wheel Assembly Nose Tubeless/Tube-Type 5 Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Cone-Bearing Bolt (MS ) Washer (MS20002C6) Washer (AN ) Nut (MS S) Molded Grease Seal Snap Ring Air Valve Assy O-Ring (MS )

212 Wheel Assembly Wheel Assembly Nose Tube-Type PER ASSY. FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Cup-Bearing Cone-Bearing Bolt (AN5-37A) Washer (AN ) Nut (MS21044-N5) Molded Grease Seal Snap Ring Axle Spacer

213 This page intentionally left blank

214 Wheel Assembly Main, External , 40-12A, 40-78, 40-78A, 40-78B, 40-78E, 40-78J, , A, , Tubeless and Tube-Type FIG PART NUMBER PER ASSY (1) 40-12A (1) (2) (4) 40-78A (2) (4) 40-78B (2) (4) 40-78E (2) 40-78J (2) (4) (2) A (2) (2) DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Cup-Bearing Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Cup-Bearing Cup-Bearing Grommet (Continued on next page)

215 Wheel Assembly Main, External , 40-12A, 40-78, 40-78A, 40-78B, 40-78E, 40-78J, , A, , Tubeless and Tube-Type (Continued from previous page) PER ASSY (1) 40-12A (1) (2) (4) (6) 40-78A (2) (4) (6) 40-78B (2) (4) (6) 40-78E (2) (6) 40-78J (2) (4) (6) (2) A (2) (2) FIG. PART NUMBER DESCRIPTION O-Ring (MS ) Brake Disc Brake Disc Brake Disc Brake Disc (3) Brake Disc - Chrome Brake Disc 1 (5) Brake Disc - Performance Gold Cone-Bearing Cone-Bearing Cone-Bearing Bolt (AN4-22A) Bolt (AN4-31A) Washer (AN L) Washer (AN ) 3 9A Washer (AN L) Nut (MS ) Nut (MS21044-N4) Ring-Grease Seal Snap Ring Felt-Grease Seal Hub Cap Screw (AN ) Washer-Lock (AN936A10) Dust Shield Molded Grease Seal Grommet NOTES: (1) Use Tubeless Tire with needle inflation. (2) Use Tube-Type Tires. (3) Alternate chrome plated disc. (4) Also available with chrome plated disc. To order, specify assembly number followed by CHROME. (5) Performance gold disc no longer available. (6) Tie Bolt/Overhaul Kit is available for this wheel. Refer to PRM

216 Wheel Assembly Main, External , 40-19A Tube-Type Assy. Number A) (1) (2) (4) B) 40-19A (1) (2) (4) NOTES: (1) Inactive assembly spares support only for parts listed. (2) and 40-19A have been superseded by 40-78A. (3) Inactive part no longer available for spares support. (4) This wheel assembly is not FAA TSO approved. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B 1 (3) Inner Wheel Half Assy Cup-Bearing (3) Outer Wheel Half Assy Cup-Bearing Brake Disc Bolt (AN4-31A) Washer (AN ) Nut (MS21044-N4) Ring-Grease Seal Snap Ring Felt-Grease Seal Hub Cap Cone-Bearing Screw-Slotted (AN ) Washer-Lock (AN936A10) Dust Shield

217 Wheel Assembly Main, External D (40-1), Tubeless 5 Assy. Number A) D (40-1) (1) (2) B) (1) (2) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Use tubeless tire with needle inflation. (3) Alternate chrome plated disc. (4) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B 1 (4) Inner Wheel Half Assy Cup-Bearing (4) Outer Wheel Half Assy Cup-Bearing Cone-Bearing Brake Disc Brake Disc (3) Brake Disc - Chrome (3) Brake Disc - Chrome Bolt (AN4-40A) Washer (AN ) Nut (MS21044-N4) (4) O-Ring (MS ) Hub Cap 1 (4) Hub Cap Shield-Dust Shield-Dust Plate-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Screw (AN ) Washer-Lock (MS ) Screw (AN ) Washer-Lock (AN936A10)

218 Wheel Assembly Main, External A (40-3), ) Tube-Type PER ASSY. NOTES: (1) Brake discs sold only as and with rivets. PART NUMBER 3080A (40-3) 3070 (40-5) FIG. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Inner Wheel Half Assembly Inner Wheel Half Assembly (1) Brake Disc (1) Brake Disc Rivet (AN425-AD Cup-Bearing Cone-Bearing Bolt (AN4-10A) Bolt (AN4-36A) Washer (AN ) Nut (MS21044-N4) Dust Shield Snap Ring Snap Ring Hub Cap Molded Grease Seal Felt-Grease Seal Ring-Grease Seal Screw-F.H.C. (AN ) Washer-Lock (MS )

219 Wheel Assembly Main, External B (40-4), 3080D (40-116), Tube-Type 5 PER ASSY. NOTES: (1) To obtain inner wheel half assy. with disc & hardware, order the following: 3080B order D order order FIG. PART NUMBER DESCRIPTION 3080B (40-4) 3080D (40-116) Outer Wheel Half Assembly Cup-Bearing Inner Wheel Half Assembly Cup-Bearing Brake Disc Brake Disc Brake Disc Bolt (AN4H-5A) Washer (AN ) Nut (MS S) Bolt (AN4-6A) Washer (AN ) Grease Seal Snap Ring Hub Cap Dust Shield Snap Ring Cone-Bearing

220 Wheel Assembly Main, External (40-6), 3050 (40-7), 3050A (40-7A) Tube-Type PER ASSY. NOTES: (1) Brake drum assembly must be purchased separately. (2) Grease Seal Kit converts wheel to 3050A (40-7A). FIG. PART NUMBER DESCRIPTION 3040 (40-6) 3050 (40-7) (2) 3050A (40-7A) Inner Wheel Half Assembly Cup-Bearing (1) Brake Drum Assembly (1) Brake Drum Assembly Outer Wheel Half Assembly Cup-Bearing Bolt (AN4-36A) Nut (MS21044-N4) Washer (AN ) Dust Shield (2) Ring-Grease Seal Ring-Grease Seal (2) Felt-Grease Seal Felt-Grease Seal Hub Cap Screw (AN ) (2) Screw (AN ) Lock-Washer (AN936A10) (2) Lock-Washer (MS ) Cone-Bearing Spacer-Inner Shoulder

221 Wheel Assembly Main, External , 40-24, 40-28, 40-28D, Tube-Type Assy. Number A) (1) B) (1) C) D) 40-28D E) (1) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support. (3) Alternate chrome plated disc. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E 1 (2) Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy (2) Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Cone-Bearing Brake Disc Brake Disc Brake Disc (3) Brake Disc - Chrome (3) Brake Disc - Chrome (3) Brake Disc - Chrome Bolt (AN4-40A) Bolt (AN4-36A) Washer (AN ) Nut (MS21044-N4) Cap-Hub Shield-Dust Shield-Dust Plate-Grease Seal Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Felt-Grease Seal Screw (AN ) Washer Lock (MS ) Washer Lock (AN936A10) Screw-F.H.C. (AN )

222 Wheel Assembly Main, External , Tube-Type Assy. Number A) B) NOTES: (1) Alternate chrome plated disc. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Brake Disc Brake Disc (1) Brake Disc - Chrome Bolt (AN4-40A) Bolt (AN4-36A) Washer (AN ) Nut (MS21044-N4) Cone-Bearing Ring-Grease Seal Felt-Grease Seal Snap Ring Screw (AN ) Washer-Lock (MS ) Molded Grease Seal

223 This page intentionally left blank

224 Wheel Assembly Main, External , 40-57, 40-57A, 40-61, Tube-Type 5-44

225 Wheel Assembly Main, External , 40-57, 40-57A, 40-61, Tube-Type PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E Inner Wheel Half Assy. 1 1 (4) Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Cup-Bearing (chrome plated) Outer Wheel Half Assy. 1 3 (4) Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Cup-Bearing (chrome plated) Brake Disc Brake Disc Brake Disc (2) Brake Disc - Chrome (2) Brake Disc - Chrome Bolt (AN4-36A) Bolt (AN4-40A) Washer (AN ) Nut (MS21044-N4) (4) O-Ring (MS ) Cone-Bearing Cone-Bearing (chrome plated) Hub Cap Hub Cap Dust Shield Dust Shield Dust Shield Plate-Grease Seal Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Felt-Grease Seal Screw (AN ) Screw (AN ) Washer (MS ) Washer-Lock (AN936A10) Assy. Number A) (1) (3) B) (1) C) 40-57A D) E) (1) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Alternate chrome plated disc. (3) Use tubeless tire with needle inflation. (4) Inactive part no longer available for spares support

226 Wheel Assembly Main, External , 40-59A, 40-59D, 40-59E Tube-Type PER ASSY. NOTES: (1) Alternate chrome plated disc. (2) Also available with chrome plated disc. To order, specify assembly number followed by CHROME. (3) Performance gold disc no longer available. FIG. PART NUMBER DESCRIPTION A (2) Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Cup-Bearing Brake Disc Brake Disc (1) Brake Disc - Chrome 1 (3) Brake Disc - Performance Gold Bolt (AN5-34A) Washer (AN ) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Snap Ring Washer-Lock (MS ) Screw Dust Shield Molded Grease Seal Molded Grease Seal Molded Grease Seal D 40-59E 5-46

227 Wheel Assembly Main, External , 40-60A, Tube-Type 5 PER ASSY. NOTES: (1) Alternate chrome plated disc. (2) To be used with 1-1/4 axle. (3) Use with: and 6-ply, and 6-ply, , 6- and 8-ply (4) Also available with chrome plated disc. To order, specify assembly number followed by CHROME. (5) Performance gold disc no longer available. PART NUMBER (2) (3) (4) 40-60A (2) (3) (4) (2) (3) FIG. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Bolt (AN4-36A) Washer (MS ) Nut (MS21044-N4) Cone-Bearing Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Snap Ring Brake Disc (1) Brake Disc - Chrome Brake Disc 1 (5) Brake Disc - Performance Gold

228 Wheel Assembly Main, External , 40-74A, 40-74B Tube-Type Assy. Number A) B) 40-74A C) 40-74B NOTES: (1) Alternate chrome plated disc. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C Inner Wheel Half Assy Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Cup-Bearing (chrome plated) Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Cup-Bearing (chrome plated) Brake Disc Brake Disc - Chrome (1) Brake Disc - Chrome Bolt (AN4-40A) Washer (AN ) Nut (MS21044-N4) Cone-Bearing Cone-Bearing (chrome plated) Plate-Grease Seal Ring-Grease Seal Felt-Grease Seal Screw (AN ) Washer-Lock (MS ) Fitting-Grease

229 Wheel Assembly Main, External B, 40-75D, 40-75E, 40-75F, 40-75G, 40-75H, 40-75J, 40-75P, 40-75S, 40-75T, 40-75W, 40-75Z Tube-Type PER ASSY. NOTES: (1) Alternate chrome plated disc. (2) 40-75J to be used with 30-52Y corrosive resistant equipment. (3) Inactive assembly spares support only for parts listed. (4) Supersedes per PRM 61. (5) Supersedes per PRM 61. (6) Also available with chrome plated disc. To order, specify assembly number followed by CHROME. (7) Performance gold disc no longer available B (6) FIG. PART NUMBER DESCRIPTION Inner Wheel Half Assy Inner Wheel Half Assy Inner Wheel Half Assy Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Cup-Bearing Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Cup-Bearing Brake Disc Brake Disc (4) Brake Disc Brake Disc (1) Brake Disc - Chrome (1) Brake Disc - Chrome (5) (1) Brake Disc - Chrome (1) Brake Disc - Chrome Brake Disc 1 (7) Brake Disc - Perfor. Gold (7) Brake Disc - Perfor. Gold 1 (7) Brake Disc - Perfor. Gold Bolt (AN5-35A) Bolt (AN5-36A) Washer (AN ) Washer (AN L) Nut (MS21044-N5) Cone-Bearing Cone-Bearing Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal 2 9A Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Felt-Grease Seal Felt-Grease Seal Snap Ring Shield, Dust Washer, Lock Screw Molded Grease Seal Molded Grease Seal D (6) 40-75E (6) 40-75F (6) 40-75G (6) 40-75H (6) 40-75J (2) 40-75P (6) 40-75S (3) 40-75T (6) 40-75W 40-75Z (6)

230 Wheel Assembly Main, External A, 40-83, 40-83A, 40-83B, 40-84, 40-84A, 40-84B Tube-Type PER ASSY. NOTES: (1) Supersedes per PRM 61. (2) Supersedes or per SB7033 and PRM 61. (3) Alternate chrome plated disc. (4) Supersedes per SB7033 and PRM 61. (5) Supersedes per PRM 61. (6) Also available with chrome plated disc. To order, specify assembly number followed by CHROME. (7) SB Service Bulletin Kit upgrades wheel to 40-84B configuration per SB7059. FIG. 1 PART NUMBER DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Brake Disc Brake Disc (1) Brake Disc Brake Disc Brake Disc (2) (3) Brake Disc-Chrome (3) Brake Disc-Chrome (5) (3) Brake Disc-Chrome (4) (3) Brake Disc-Chrome Bolt (AN5-35A) Washer (AN L) Washer (AN ) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Felt-Grease Seal Molded Grease Seal Molded Grease Seal Molded Grease Seal Snap Ring A (6) 40-83A 40-83B (7) 40-84A 40-84B 5-50

231 Wheel Assembly Main, External , 40-86, 40-86A, 40-86B, 40-86E, 40-86F, 40-88C Tube-Type PER ASSY. NOTES: (1) Alternate chrome plated disc. (2) Performance gold disc no longer available. (3) Also available with chrome plated disc. To order, specify assembly number followed by CHROME. (4) SB Service Bulletin Kit upgrades wheel to per SB7057. (5) SB Service Bulletin Kit upgrades wheel to 40-86F per SB7058. * Not illustrated PART NUMBER FIG. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Brake Disc Brake Disc (1) Brake Disc - Chrome (3) 40-86A (3) 40-86B (3) (4) (5) 40-86E (3) 40-86F (3) 40-88C (3) (2) Brake Disc - Performance Gold Bolt (AN5-35A) Washer (AN ) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal A Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Snap Ring Spacer-Axle 1 * Dust Shield 1 * Washer (MS ) 3 * Screw Molded Grease Seal Molded Grease Seal Molded Grease Seal

232 Wheel Assembly Main, External , 40-90A, 40-90B, 40-90D, 40-90E, 40-90F Tube-Type PER ASSY. FIG. 1 PART NUMBER DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Brake Disc Brake Disc Brake Disc Brake Disc Brake Disc Cone-Bearing Bolt (AN5-36A) Washer (AN ) Nut (MS21044-N5) Ring-Grease Seal Molded Grease Seal Molded Grease Seal Snap Ring A 40-90B 40-90D 40-90E 40-90F 5-52

233 Wheel Assembly Main, External A, 40-96E, , A Tube-Type 5 Assy. Number A) 40-96A B) 40-96E C) D) A NOTES: (1) Supersedes per PRM 61. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Brake Disc (1) Cone-Bearing Bolt (AN5-35A) Washer (AN L) Nut (MS21044-N5) Ring-Grease Seal A Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Snap Ring Molded Grease Seal Molded Grease Seal

234 Wheel Assembly Main, External A, 40-97B, 40-97C, 40-97D, 40-97E, 40-97F, Tube-Type PER ASSY. NOTES: (1) Inactive assembly spares support only for parts listed. (2) 40-97A supersedes 40-97B. (3) 40-97D supersedes 40-97C. (4) Alternate chrome plated disc. (5) Also available with chrome plated disc. To order, specify assembly number followed by CHROME. (6) Performance gold disc no longer available. PART NUMBER 40-97A (5) 40-97B (1) (2) 40-97C (1) (3) 40-97D (5) 40-97E (5) 40-97F (5) FIG. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Brake Disc Brake Disc (4) Brake Disc - Chrome (6) Brake Disc - Performance Gold Cone-Bearing Bolt (AN5-35A) Bolt (AN4-37A) Washer (AN ) Washer (AN L) Nut (MS21044-N5) Nut (MS21044-N4) Ring-Grease Seal Ring-Grease Seal 2 9A Ring-Grease Seal Ring-Grease Seal Cap-Hub Felt-Grease Seal Felt-Grease Seal Felt-Grease Seal Snap Ring Molded Grease Seal Molded Grease Seal

235 Wheel Assembly Main, External , A, C, X Tube-Type NOTES: (1) Alternate chrome plated disc. (2) Also available with chrome plated disc. To order, specify assembly number followed by CHROME. (3) Performance gold disc no longer available. FIG. PART NUMBER DESCRIPTION PER ASSY (2) A (2) C (2) X (2) Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Cup-Bearing Brake Disc Brake Disc (1) Brake Disc - Chrome (1) Brake Disc - Chrome 1 1 (3) Brake Disc - Performance Gold 1 1 (3) Brake Disc - Performance Gold Bolt (AN4-36A) Washer (AN ) Nut (MS21044-N4) Cone-Bearing Ring-Grease Seal 4 2 9A Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Snap Ring Molded Grease Seal Molded Grease Seal

236 Wheel Assembly Main, External , C, , A Tube-Type PER ASSY. NOTES: (1) Wheel Disc Kit (items 4, 6, 8) retrofits or C wheel to use slotted disc. TSO approved per PRM 33. (2) Install washer per PRM 33. (3) Tiebolt Service Kit available for this wheel. Refer to PRM 84. FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Brake Disc (Slotted) (1) Brake Disc (Slotted) Brake Disc (Slotted) Bolt (AN5-35A) Washer (1) (2) Washer (AN ) Nut (MS ) (1) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal Snap Ring Molded Grease Seal Molded Grease Seal Molded Grease Seal (1) C (1) (3) A 5-56

237 Wheel Assembly Main, External , Tube-Type 5 Assy. Number A) B) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Brake Disc (Slotted) Brake Disc (Slotted) Bolt (AN5-45A) Bolt (AN5-35A) Washer (AN L) Washer (AN ) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal Molded Grease Seal Molded Grease Seal Ring-Snap

238 Wheel Assembly Main, External , A, B, C Tube-Type PER ASSY. NOTES: (1) High corrosion resistant, amphibious equipment. (2) Alternate chrome plated disc. (3) Same as A except equipped with standard bearings. FIG. PART NO. DESCRIPTION (1) A (1) B C (3) Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing (chrome plated) Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing (chrome plated) Cup-Bearing Grease Dam Spacer Brake Disc (2) Brake Disc (Chrome) Bolt (AN5-35A) Washer (AN ) Nut (MS ) Cone-Bearing (chrome plated) Cone-Bearing Molded Grease Seal A Molded Grease Seal Molded Grease Seal Snap Ring

239 Wheel Assembly Main, External D-30260, D , D Tube-Type 5 Assy. Number A) D (1) (2) B) D (1) (2) C) D (1) (2) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. (3) Inactive part no longer available for spares support. (4) All wheel assemblies listed were formerly manufactured by McCauley Industrial Corporation. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C Hub Assy (3) Cone-Bearing (3) Wheel Flange 1 1 (3) Wheel Flange 1 (3) Wheel Flange 1 4 (3) Wheel Flange 1 (3) Wheel Flange Brake Disc Spacer (3) Screw Washer (AN ) (3) Washer Ring Ring Ring Felt (3) Felt Snap Ring

240 Wheel Assembly Main, External D , D , D , D , D , D Tube-Type Assy. Number A) D (3) (4) B) D (3) (4) C) D (3) (4) D) D (3) E) D (3) F) D (3) (4) NOTES: (1) All wheel assemblies listed were formerly manufactured by McCauley Industrial Corporation. (2) Alternate chrome plated disc. (3) Inactive assembly spares support only for parts listed. (4) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. (5) Inactive part no longer available for spares support. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E F Hub Assy Cup-Bearing (5) Wheel Flange (5) Wheel Flange 1 (5) Wheel Flange 1 4 (5) Wheel Flange 1 (5) Wheel Flange 1 (5) Wheel Flange 1 (5) Wheel Flange Brake Disc Brake Disc Brake Disc Brake Disc (2) Brake Disc (Chrome) (2) Brake Disc (Chrome) (2) Brake Disc (Chrome) (2) Brake Disc (Chrome) Spacer Screw Washer (AN ) Ring Ring Ring Felt Felt Snap Ring Cone-Bearing

241 Wheel Assembly Main, External D , D , D , D , D Tube-Type Assy. Number A) D (1) (5) B) D (1) (5) C) D (1) (5) D) D (1) E) D (1) (5) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support. (3) All wheel assemblies listed were formerly manufactured by McCauley Industrial Corporation. (4) Alternate chrome plated disc. (5) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E 1 (2) Inner Wheel Half Assy (2) Inner Wheel Half Assy Cup-Bearing Cup-Bearing Cone-Bearing Cone-Bearing Ring Felt Snap Ring Brake Disc Brake Disc Brake Disc (4) Brake Disc (Chrome) (4) Brake Disc (Chrome) (4) Brake Disc (Chrome) (2) Outer Wheel Half Assy (2) Outer Wheel Half Assy Cup-Bearing Cup-Bearing Cone-Bearing Cone-Bearing Ring Ring Felt Snap Ring Bolt Washer (AN L) Nut

242 Wheel Assembly Main, External D , D , D , D , D Tube-Type Assy. Number A) D (1) B) D (1) (4) C) D (1) D) D (1) E) D (1) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support. (3) All wheel assemblies listed were formerly manufactured by McCauley Industrial Corporation. (4) Superseded equipment refer to Cessna Service Bulletin SEB00-5 and Cessna Service Kit SK for replacement wheels and brakes. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E 1 (2) Inner Wheel Half Assy (2) Inner Wheel Half Assy Cup-Bearing Cup-Bearing Cone-Bearing Cone-Bearing Ring Felt Snap Ring Brake Disc (Chrome) Brake Disc (Chrome) Brake Disc (Chrome) (2) Outer Wheel Half Assy (2) Outer Wheel Half Assy Cup-Bearing Cup-Bearing Cone-Bearing Cone-Bearing Ring Ring Felt Snap Ring Bolt Washer (AN L) Nut

243 Wheel Assembly Main, External , , A Tube-Type PER ASSY. 5 NOTES: (1) For use with tire size 15 x only. FIG. PART NO. DESCRIPTION (1) Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Cup-Bearing Brake Disc Bolt (AN5-35A) Washer (AN ) Nut (MS21044-N5) Nut (MS S) Cone-Bearing Snap Ring Molded Grease Seal Molded Grease Seal A 5-63

244 Wheel Assembly Main, External Tube-Type PER ASSY. FIG. PART NUMBER DESCRIPTION Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Cup-Bearing Brake Disc Bolt (AN5-50A) Washer (AN ) Nut (MS21044-N Cone-Bearing Hub Cap Molded Grease Seal Snap Ring

245 Wheel Assembly Main, External , 40-98A, 40-98D, 40-98E, 40-98F, 40-98G, 40-98H, 40-98N, 40-98P, Tube-Type PER ASSY. NOTES: (1) Inactive assembly spares support only for parts listed. * Note: dust shield and attaching hardware not shown in illustration. FIG. 1 PART NUMBER DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly A 40-98D 40-98E 40-98F 40-98G 40-98H 40-98N (1) Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Bolt (AN5-35A) Washer (AN ) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal A Felt-Grease Seal Felt-Grease Seal A Molded Grease Seal Snap-Ring Brake Disc Brake Disc Brake Disc Brake Disc 1 13A Brake Disc (Slotted) Molded Grease Seal Molded Grease Seal * Screw 3 * Dust Shield 1 * Washer (MS ) P

246 Wheel Assembly Main, External , A Tube-Type Assy. Number A) (1) (3) B) A NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support. (3) superseded by A. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B 1 (2) Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing (2) Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Bolt (AN5-35A) Washer (AN ) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal A Ring-Grease Seal B Ring-Grease Seal Felt-Grease Seal A Felt-Grease Seal Snap Ring Brake Disc Axle Spacer (not shown)

247 Wheel Assembly Main, External , , C, D, E Tube-Type Assy. Number A) B) C) C D) D E) E * Note dust shield and attaching hardware not shown in illustration. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Bolt Washer (AN ) Washer (AN L) Nut-Lock (MS21044-N5) Cone-Bearing Ring-Grease Seal A Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Molded Grease Seal Snap Ring Brake Disc Brake Disc 1 14 A Brake Disc (Slotted) Axle Spacer 1 1 * Screw 3 * Dust Shield 1 * Washer (MS ) Molded Grease Seal Molded Grease Seal

248 Wheel Assembly Main, External Tube-Type Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Bolt Washer (AN ) Nut (MS21044-N5) Cone Bearing Molded Grease Seal Snap Ring Brake Disc (Slotted) Axle Spacer

249 Wheel Assembly Main, External 18 x , , Tubeless Assy. Number A) (1) B) (1) C) (3) NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support. (3) supersedes PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C 1 (2) Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Cup-Bearing 1 3 (2) Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Cup-Bearing Brake Disc (Slotted) Bolt (MS ) Bolt (MS ) 6 5 A Washer (MS20002C6) Washer (MS ) Washer (AN ) Washer (MS ) Nut (MS S) Nut (NAS1804-6N) Cone-Bearing Cone-Bearing Ring-Grease Seal Ring-Grease Seal Molded Grease Seal Hub Cap-Sealed Snap Ring Air Valve Assy O-Ring (MS )

250 Wheel Assembly Main, External 18 x Tubeless Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Outer Wheel Half Assy Cup-Bearing Inner Wheel Half Assy Cup-Bearing (Inner) Cone-Bearing Cone-Bearing (Inner) O-Ring (MS ) Brake Disc Bolt (AN4H-20A) Washer (AN ) Nut (MS ) Hub Cap Snap Ring Air Valve Assy

251 Wheel Assembly Main, External 18 x Tubeless 5 FIG. PART NO. DESCRIPTION PER ASSY Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Cup-Bearing Brake Disc Bolt Washer Nut Cone-Bearing Seal, Grease Valve, Inflation Packing, Preformed

252 Wheel Assembly Main, External A, 40-40B, 40-40C, , A, , , , Tube-Type 5-72

253 Wheel Assembly Main, External A, 40-40B, 40-40C, , A, , , , Tube-Type PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D E F G H I Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Cup-Bearing Spacer Spacer Brake Disc Brake Disc Brake Disc Brake Disc Brake Disc Brake Disc 1 6 A Brake Disc (Slotted) Brake Disc (Slotted) Bolt (AN4-32A) Bolt Washer (AN ) Washer (AN L) Nut (MS21044-N4) Nut (MS S) Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal Felt-Grease Seal A Molded Grease Seal Molded Grease Seal Snap Ring Snap Ring Cone-Bearing Cone-Bearing Hub Cap Hub Cap Assy. Number A) 40-40A B) 40-40B C) 40-40C D) E) A F) G) (1) (2) H) (3) I) NOTES: (1) Inactive assembly spares support only for parts listed. (2) superseded by A. (3) This wheel is not FAA TSO approved order from airframe manufacturer only

254 Wheel Assembly Main, External D, A Tube-Type Assy. Number A) 40-40D B) A (1) NOTES: (1) Optional high strength hardware: Qty Bolt (MS ) Washer (MS20002C5) Nut 9 Above hardware must be used together to maintain proper grip on bolts DO NOT mix with AN hardware. Refer to PRM41 for installation instructions. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Brake Disc 1 5A Brake Disc (Slotted) Bolt (AN5-32A) Washer (AN ) Nut (MS21044-N5) Molded Grease Seal Snap Ring Snap Ring Cone-Bearing A Cone-Bearing Hub Cap

255 Wheel Assembly Main, External , A, , Tube-Type & Tubeless 5 Assy. Number A) (1) B) A (1) C) (2) D) (1) NOTES: (1) Use tube-type tires. (2) Use tubeless tires. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C D Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Spacer O-Ring (MS ) Brake Disc A Brake Disc (Slotted) Brake Disc (Slotted) Bolt (AN5-35A) Bolt (AN5-37A) Washer (AN ) Washer (AN L) Nut (MS21044-N5) Ring-Grease Seal Felt-Grease Seal Snap Ring Cone-Bearing Hub Cap Air Valve Assy O-Ring (MS )

256 Wheel Assembly Main, External A Tube-Type Assy. Number A) A (1) NOTES: (1) A supersedes PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Spacer Brake Disc (Slotted) Bolt (AN5-34A) Washer (AN ) Nut (MS21044-N5) Ring-Grease Seal Felt-Grease Seal Snap Ring Snap Ring Cone-Bearing Cone-Bearing Hub Cap

257 Wheel Assembly Main, External , Tube-Type 5 Assy. Number A) B) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Brake Disc (Slotted) Brake Disc (Slotted) Bolt (AN5-35A) Washer (AN ) Nut (MS21044-N5) Ring-Grease Seal Felt-Grease Seal Snap Ring Cone-Bearing Hub Cap

258 Wheel Assembly Main, External , , Tube-Type & Tubeless 5-78

259 Wheel Assembly Main, External , , Tube-Type & Tubeless PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B C Inner Wheel Half Assy. (2) Inner Wheel Half Assy. (3) Inner Wheel Half Assy. (2) Inner Wheel Half Assy. (2) Inner Wheel Half Assy. (3) Cup-Bearing Spline-Nut A Spline-Nut Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Spacer O-Ring (MS ) Brake Disc (Slotted) Brake Disc (Slotted) Brake Disc (Slotted) Bolt (AN5-15A) Bolt (AN6-20A) Bolt (MS ) Washer (AN ) Washer (MS20002C5) 8 10 A Washer (AN L) Ring-Grease Seal Felt-Grease Seal Molded Grease Seal Snap Ring Cone-Bearing Hub Cap Air Valve Assy O-Ring (MS ) 1 1 Assy. Number A) (1) B) (4) C) (1) NOTES: (1) Use tubeless tires. (2) Inner wheel half assy. with disc. (3) Inner wheel half assy. without disc. (4) Use type-type tires

260 Wheel Assembly Main, External , A, D, E, , , A, , A, , Tube-Type FIG. 1 PART NUMBER (Continued on next page) PER ASSY. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly Inner Wheel Half Assembly A (3) D E (1) (2) A (1) (2) Inner Wheel Half Assembly Cup-Bearing Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Cup-Bearing Cup-Bearing A (3) 5-80

261 Wheel Assembly Main, External , A, D, E, , , A, , A, , Tube-Type (Continued from previous page) PER ASSY. FIG A PART NUMBER DESCRIPTION Spacer Spacer Brake Disc Brake Disc Brake Disc Brake Disc (Slotted) Brake Disc (Slotted) Bolt (AN4-40A) Bolt (AN5-41A) Bolt (AN5-40A) Washer (AN ) Washer (AN ) Nut (MS21044-N4) Nut (MS21044-N5) Ring-Grease Seal Ring-Grease Seal Felt-Grease Seal Felt-Grease Seal A (3) D E (1) (2) A (1) (2) 11A Molded Grease Seal Snap Ring Snap Ring Cone-Bearing Cone-Bearing Cone-Bearing Hub Cap Hub Cap Hub Cap Assembly Hub Cap O-Ring (MS ) Air Valve Assembly Spacer (Outboard) A (3) 5 NOTES: (1) Wheel size is 24 x 7.7; also suitable to use and tires. (2) Tubeless/Tube-Type convertible wheel. (3) This wheel is not FAA TSO approved order from airframe manufacturer only. 5-81

262 Wheel Assembly Main, External 29 x , , , Tube-Type PER ASSY. NOTES: (1) This wheel is not FAA TSO approved order from airframe manufacturer only. FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Cone-Bearing Cone-Bearing Spacer Axle Spacer Brake Disc Brake Disc Brake Disc Brake Disc Bolt (AN5-71A) Bolt (AN5-65A) Washer (AN ) Nut (MS21044-N5) Ring-Grease Seal Felt-Grease Seal Snap Ring Snap Ring Hub Cap (1)

263 Wheel Assembly Main, External 24 x A, , , A, B, Tubeless/Tube-Type PER ASSY. NOTES: (1) A supersedes (2) Wheel qualified for usage with 24 x 7.7 or , 10-ply; use tubeless or tube-type tires. (3) Bolt Retorque Kit provides increased bolt torque requirements. TSO approved per PRM A (1) (2) (3) FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Spacer Brake Disc (Slotted) Brake Disc (Slotted) Brake Disc (Slotted) Brake Disc (Slotted) Bolt (MS ) Bolt (NAS ) Washer (MS20002C6) Washer (AN ) Nut (NAS1804-6N) Nut (MS ) Ring-Grease Seal Felt-Grease Seal Molded Grease Seal Snap Ring A Snap Ring Cone-Bearing A Cone-Bearing Spacer Hub Cap Air Valve Assembly O-Ring (MS ) A B

264 Wheel Assembly Main, External , , , A Tubeless/Tube-Type PER ASSY. NOTES: (1) Inactive assembly spares support only for parts listed. (2) Superseded by (3) Inactive part no longer available for spares support. (4) Wheel Upgrade Kit converts wheel to TSO approved per ESB7024. (5) Refer to Parker Service Bulletin SB7082 for replacement hubcap and seals. (6) SB Service Bulletin Kit upgrades wheel to A configuration per SB (1) (2) (4) FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly (3) Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly (3) Outer Wheel Half Assembly (5) (6) Cup-Bearing Air Valve Assembly Cone-Bearing Brake Disc Brake Disc Brake Disc Molded Grease Seal A Molded Grease Seal Snap Ring Hub Cap A Hub Cap Grease Dam Bolt (AN6-55A) Bolt (MS ) Washer (MS ) Washer (AN ) A Washer (MS20002C6) (3) Nut Nut (NAS1804-6N) O-Ring (MS ) Washer, Axle A (5) 5-84

265 Wheel Assembly Main, Internal 16 x Tubeless 5 Assy. Number A) PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing Key Drive Screw (MS ) Outer Wheel Half Assy Cup-Bearing Cone Bearing Bolt (MS ) Washer (MS ) Nut Molded Grease Seal Snap Ring O-Ring (MS ) Air Valve Assy

266 Wheel Assembly Main, Internal 18 x A, , Tubeless PER ASSY. NOTES: (1) Inactive assembly spares support only for parts listed. (2) Inactive part no longer available for spares support A (1) FIG. PART NO. DESCRIPTION Outer Wheel Half Assembly Outer Wheel Half Assembly 1 (2) Outer Wheel Half Assembly Cup-Bearing Inner Wheel Half Assembly Inner Wheel Half Assembly 1 (2) Inner Wheel Half Assembly Cup-Bearing Drive Key Drive Key Screw (MS ) Screw (MS ) Bolt (MS ) Bolt (MS ) Washer (MS20002C5) Washer (MS ) Washer (MS ) Washer (MS ) Nut Nut Cone-Bearing Molded Grease Seal Grease Seal Snap Ring Air Valve Assy (MS27436C1) O-Ring (MS ) Lockwire (MS20995C32) A/R

267 Wheel Assembly Main, Internal 18 x Tubeless 5 PER ASSY. FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Cup-Bearing Outer Wheel Half Assembly Cup-Bearing Spacer, Grease Dam Packing, Preformed (MIL-P-83461/1-145) Bolt (MS ) Washer (MS ) Nut (NAS1804-6N) Cone-Bearing Grease Seal, Molded Rubber Retaining Ring Packing, Preformed (MIL-P-83461/1-261) Key, Drive Screw (MS ) Lockwire (MS20995-C20) Valve Assembly, Inflation

268 Wheel Assembly Main, Internal B, C Tubeless PER ASSY. FIG. PART NO. DESCRIPTION Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Bolt (MS ) Washer (MS ) Washer (MS20002C5) Nut (MS S) Cone-Bearing O-Ring (MS ) Air Valve Assembly Key Liners Screw (MS ) Lockwire (MS20995-C32) A/R A/R B C 5-88

269 Wheel Assembly Main, Internal Tubeless PER ASSY. 5 NOTES: (1) Use with LH or RH. (2) This wheel is not FAA TSO approved order from airframe manufacturer only (1) (2) FIG. PART NO. DESCRIPTION Inner Wheel Half Assy Cup-Bearing Outer Wheel Half Assy Cup-Bearing Spacer Bolt Washer (AN ) Nut (MS21044-N5) Cone-Bearing Ring-Grease Seal Felt-Grease Seal 1 10A Felt-Grease Seal Snap Ring Air Valve Assembly O-Ring Key Drive Screw (MS ) Fuse Plug O-Ring (MS ) Lockwire (MS20995-C32) A/R 5-89

270 Wheel Assembly Main, Internal , , , A, B Tubeless/Tube-Type 5-90

271 Wheel Assembly Main, Internal , , , A, B Tubeless/Tube-Type (2) (1) PER ASSY (1) (3) (5) A (1) FIG. PART NO. DESCRIPTION Inner Wheel Half Assy Inner Wheel Half Assy. 1 1 (4) Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Cup-Bearing Key Drive Key Drive Screw (AN501A10-4) Molded Grease Seal Molded Grease Seal Molded Grease Seal Outer Wheel Half Assy Outer Wheel Half Assy. 1 6 (4) Outer Wheel Half Assy Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Cup-Bearing Cone-Bearing Cone-Bearing Bolt (MS ) Washer (MS20002C6) A Washer (AN ) Nut (MS S) Nut (NAS1804-6N)) Hub Cap Snap Ring Snap Ring Snap Ring Spacer Air Valve Assembly Air Valve Assembly O-Ring (MS ) Lockwire (MS20995-C32) A/R A/R A/R A/R Lockwire (MS20995-C32) A/R Hubcap Assy Hubcap Drive Coupling Rivet Washer (AN960-10) Screw (MS ) B NOTES: (1) Convertible Tubeless/Tube-Type wheel. (2) Tubeless only. (3) Inactive assembly spares support only for parts listed. (4) Inactive part no longer available for spares support. (5) superseded by A

272 Wheel Assembly Main, Internal Tube-Type Assy. Number A) (1) NOTES: (1) Used with brake assembly. (2) brake disc is a component of the brake; shown for reference only. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Inner Wheel Half Assy Cup-Bearing, Chrome Plated Key-Drive Screw-Drive Key (MS24693-S272) Outer Wheel Half Assy Cup-Bearing, Chrome Plated Bolt (AN4-10A) Washer (AN ) Nut (MS21044-N4) Cone-Bearing, Chrome Plated Cone-Bearing, Chrome Plated Ring-Grease Seal Dust Shield Screw-Fil. Hd. Cap (AN ) Washer-Lock (AN936A6) Fitting-Lubricator Grease Seal Brake Disc (Ref.) (2)

273 Wheel Assembly Wheel Assembly Main, Internal Tubeless PER ASSY. 5 FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Cone-Bearing Bolt (MS ) Washer (MS ) Nut, Self-locking (NAS1804-5N) Grease Seal, Molded Rubber Ring, Retaining Packing, Preformed (MS ) Plug, Fusible Packing, Preformed (MS ) Rupture Disc Assembly Valve Assembly, Inflation Key, Drive Screw (NAS1102E3-6) Shield, Heat Bumpers, Shield, Heat Fairing Screw Grommet Washer (AN960-10L)

274 Wheel Assembly Main, Internal 22 x , , Tubeless PER ASSY. NOTES: (1) Wheel Heat Shield Kit retrofits wheel assembly to use latest heat shield configuration. TSO approved per ESB (1) (1) (1) FIG. PART NO. DESCRIPTION Inner Wheel Half Assy Inner Wheel Half Assy Cup-Bearing Key Drive Heat Shield Clip A Heat Shield Rivet (MS20426-AD4-9) Fuse Plug O-Ring (MS ) Outer Wheel Half Assy Outer Wheel Half Assy Cup-Bearing Air Valve Assy. (MS27436C1) Air Valve Assy Cone-Bearing Bolt (MS ) Washer (MS20002C6) Washer (MS ) Nut Hub Cap Assembly Hub Cap Assembly Screw (AN501A10-6) Grease Seal Grease Seal O-Ring (MS ) Snap Ring

275 Wheel Assembly Main, Internal 32 x , , Tube-Type NOTES: (1) Inactive assembly spares support only for parts listed. (2) superseded by (3) Inactive part no longer available for spares support PER ASSY (1) (2) FIG. PART NO. DESCRIPTION Inner Wheel Half Assembly Inner Wheel Half Assembly Cup-Bearing Key-Drive Screw-Drive Key (MS24693-S272) Screw-Drive Key (NASM L) Outer Wheel Half Assembly Outer Wheel Half Assembly Cup-Bearing Fitting-Grease (MS ) Cone-Bearing, Inner Cone-Bearing, Outer Bolt (MS ) (3) Bolt Nut (NAS1804-6N) (3) Nut Washer (MS20002C6) (3) Washer O-Ring (MS ) Grease Seal Hub Cap Seal-Hub Cap Screw-Hub Cap Lock Washer-Hub Cap (MS ) Axle Spacer

276 Notes 5-96

277 Part Number Index Parking Valve All SECTION A, C, , A, B, C, D, , , B, , , , A, , , , A, ,

278 Notes 6-2

279 Parking Valve Series Noted 60-3A, 60-3C, Assy. Number A) 60-3A B) 60-3C Note: Parts list for reference only. Contact airframe manufacturer to order parking valve and components listed. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Body-Valve Pin Camshaft Assy O-Ring, Camshaft (MS ) A O-Ring, Camshaft (MS ) B O-Ring, Camshaft (MS ) Washer (AN960-10) Bushing Spring Nut (NASM21083N3) O-Ring, Valve Valve Spring Fitting, Tube (AN816-3D) Fitting, Tube (AN816-4D) Seal Kit (items 4, 4A, 4B, 9)

280 Parking Valve Series Noted , Note: Parts list for reference only. Contact airframe manufacturer to order parking valve and components listed. Assy. Number A) (1) B) (2) NOTES: (1) Cleveland Valve was Gerdes Products Co. A (2) and spares are available thru distribution; PMA approved details of Kit for Bell 412. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A B Body, Valve Body, Valve Roll Pin Roll Pin Camshaft Assembly Camshaft Assembly O-Ring, Camshaft (MS ) Snap Ring O-Ring, Poppet (2-006-N507-90) Poppet Spring Spring O-Ring, Fitting (MS ) Fitting Lockwire (MS20995-C20) A/R A/R Seal Kit (items 4, 6, 9)

281 Parking Valve Series Noted 60-5, 60-5A, 60-5B, 60-5C, 60-5D, 60-6, 60-9, 60-9B, Note: Parts list for reference only. Contact airframe manufacturer to order parking valve and components listed. PER ASSY. NOTES: (1) The following Cleveland parking valves were formerly manufactured by Gerdes Products Co. C.W.B. GERDES NUMBER NUMBER 60-5 A A A A (2) Refer to PRM92 for notice of production change to 60-9B. FIG. PART NO. DESCRIPTION Body, Valve Camshaft Assembly Camshaft Assembly Camshaft Assembly Camshaft Assembly Camshaft Assembly O-Ring, Camshaft (MS ) Snap Ring Poppet O-Ring, Poppet (2-006-N507-90) Dowel Pin Spring Spring O-Ring, Fitting (MS ) Fitting Fitting Fitting Fitting (MS D) Fitting (AN822-3D) A 60-5B 60-5C 60-5D B (2) Seal Kit (items 3, 6, 9)

282 Parking Valve Series Noted 60-10, 60-13, 60-15, 60-15A, 60-17, 60-21, 60-25, 60-25A, NOTES: Note: Parts list for reference only. Contact airframe manufacturer to order parking valve and components listed. PER ASSY. (1) Inactive Assembly spares support only for parts listed. (2) Inactive parts no longer available for spares support. (3) The following Cleveland parking valves were formerly manufactured by Gerdes Products Co. C.W.B. GERDES NUMBER NUMBER A A A A (Cessna) A (3) (3) (1) (3) FIG. PART NO. DESCRIPTION Body, Valve Body, Valve Roll Pin Camshaft Assembly Camshaft Assembly O-Ring, Camshaft (MS ) A (3) (3) Snap Ring Dowel Pin O-Ring, Poppet (2-006-N507-90) Poppet (2) Poppet Spring O-Ring, Fitting (MS ) Fitting Fitting Fitting Fitting Fitting A Nipple 1 12B Fitting (MS D) A Seal Kit (items 4, 7, 10)

283 Parking Valve Series Noted Assy. Number A) NOTES: (1) Fitting has external metric threads M10X1. (2) Cleveland Valve was Gerdes Products Co. A Note: Parts list for reference only. Contact airframe manufacturer to order parking valve and components listed. PART QTY. PER ASSY. FIG. NUMBER DESCRIPTION A Body, Valve Camshaft O-Ring (MS ) Snap Ring Dowel Pin O-Ring, Poppet (2-006-N507-90) Poppet Spring O-Ring, Fitting (MS ) Fitting (1) Seal Kit (items 3, 6, 9) 1 6-7

284 Design Information Parking Valve Parking Valve Series Noted 60-3A, 60-3C ASSEMBLY PART NUMBER A B 60-3A AND MS C AND MS General Notes: 1. Max Operating Pressure = 1,500 PSI. 2. Operating Fluid = MIL-H-5606 or MIL-H Oil. 3. Operating Temperatures = -65 F to 165 F. 4. Weight =.55 lb. 6-8

285 Design Information Parking Valve Series Noted 60-5, 60-5A, 60-5B, 60-5C, 60-5D, 60-6, 60-9, 60-9B, PART NUMBER A B C DIA. (ref.) D (ref.) E DIA. (ref.) / / A 3/8-24 3/ B 3/8-24 3/ C 7/ / D 3/8-24 3/ PART NUMBER A B C DIA. (ref.) D (ref.) E DIA. (ref.) /8-24 3/ / B --- 7/ /8-24 3/ General Notes: 1. Maximum Operating Pressure = 1,500 PSI. 2. Operating Fluid = MIL-H-5606 Oil. 3. Operating Temperatures = -65 F to +165 F 4. Maximum weight =.35 lb. (varies according to fittings). 6-9

286 Design Information Parking Valve Series Noted , ASSEMBLY PART NUMBER A B C D E F G H I J MS MS MS MS General Notes: 1. Maximum Operating Pressure = 800 PSI. 2. Operating Fluid = MIL-H-5606 Oil. 3. Operating Temperatures = -65 F to +125 F. 4. Maximum Weight =.50 lb. 5. Fittings supplied per customer requirements. 6-10

287 Design Information Parking Valve Series Noted 60-10, 60-13, 60-15A, 60-16, 60-17, 60-21, 60-25, 60-25A ASSEMBLY PART NUMBER A B C D E F G H /8-27 NPTF MS33656E (Note 5) MS33656E A 1/8-27 NPTF MS33656E /8-27 NPTF M10X (Note 6) (Note 6) (Note 6) (Note 6) /8-27 NPTF MS33656E (Note 5) AND /8-27 NPTF AND A 1/8-27 NPTF MS33656E General Notes: 1. Maximum Operating Pressure = 1,500 PSI. 2. Operating Fluid = MIL-H-5606 Oil. 3. Operating Temperatures = -65 F to +165 F 4. Maximum Weight =.35 lb. 5. Supplied with -3 fittings. 6. Camshaft lever not supplied. 6-11

288 Notes 6-12

289 Part Number Index Miscellaneous Hydraulic Assembly SECTION 7 Actuator 11-16, SFA232-5 ( ) Shimmy Damper 15-2, , , , , , , , ,

290 Notes 7-2

291 Miscellaneous Hydraulic Assembly Actuator Series Noted SFA232-5 ( ) NOTES: (1) Refer to Parker SB7076 Service Bulletin Kit for replacement components. PER ASSY. SFA232-5 (1) ( ) FIG. PART NO. DESCRIPTION Retainer Gland, End Rod, Piston O-Ring (MS ) Bearing, Swivel Cylinder, Body O-Ring (MS ) Assembly, Seal Ring, Wear Retainer, Backup (MS ) A Seal Kit (items 1, 4, 8, 9, 10) 1 7-3

292 Miscellaneous Hydraulic Assembly Actuator Series Noted 11-16, PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Body Bearing Ring, Snap (MS ) Gland, End Rod, Piston Rod, Piston Piston Washer (AN l) Washer Seal, Thread Nut (MS ) O-Ring, Piston (MS ) O-Ring, End Gland O.D. (MS ) O-Ring, End Gland I.D. (AS ) Ring, Backup (MS ) Seal Kit (items 8, 11, 12, 13)

293 Miscellaneous Hydraulic Assembly Actuator Series Noted PER ASSY. FIG. PART NO. DESCRIPTION Subassembly, Cylinder Body Housing Bushing Assembly, Piston Rod Rod, Piston Piston Washer Seal, Thread Washer (AN L) Nut (MS21042-L4) Assembly, End Gland Gland, End Rod, Nylon Bearing-Sleeve Seal, Piston Packing, Preformed (MS ) Filter, Oleo Ring, Snap (MS )

294 Miscellaneous Hydraulic Assembly Shimmy Damper Series Noted , , Note: Parts list for reference only. Contact airframe manufacturer to order shimmy dampers and components listed. PER ASSY. NOTES: (1) is identical to except that the Piston Rod Assy. (Item 2) exits the Cylinder from the oppposite end as shown. FIG. PART NO. DESCRIPTION Cylinder Body Piston Rod Assembly Piston Rod Assembly O-Ring (MS ) Backup Ring (MS ) End Cap Bearing O-Ring (MS ) Backup Ring (MS ) End Cap Stat-O-Seal Screw Snap Ring Clamp Assembly Bushing Bolt (AN3-5A) Washer (AN960C10) Nut (NASM21083N3) (1) Seal Kit (items 3, 4, 6, 7, 9)

295 This page intentionally left blank 7 7-7

296 Miscellaneous Hydraulic Assembly Shimmy Damper Series Noted 15-2, 15-8, 15-9, 15-10, 15-11, 15-13, 15-14, A 23 18A 21 20A

297 Miscellaneous Hydraulic Assembly Shimmy Damper Series Noted 15-2, 15-8, 15-9, 15-10, 15-11, 15-13, 15-14, Note: Parts list for reference only. Contact airframe manufacturer to order shimmy dampers and components listed. PER ASSY. FIG. PART NO. DESCRIPTION Cylinder Body Cylinder Body Cylinder Body Piston Rod Piston Rod Piston Rod Piston Piston Piston-Floating End Gland Snap Ring (MS ) Snap Ring (MS ) Spring Washer Roll Pin (MS171500) Glyd Ring Stat-O-Seal ( ) Screw (MS ) O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) O-Ring (MS ) Clamp Assembly Clamp Assembly Clamp Assembly 1 18A Clamp Assembly Bushing Bushing A Bushing Bolt (AN3-5A) A Bolt (MS ) Washer (AN960C10) Nut (AN ) Clamp-Upper 1 (1) Lockwire (2) AR Seal Kit (items 6, 7, 9, 11, 12, 14, 15, 16, 17) NOTES: (1) Item not illustrated. (2) Qty. AR: As Required

298 Notes 7-10

299

300 Avon, Ohio Parker Aerospace Headquarters Irvine, California Headquarters Cleveland, Ohio Parker Aerospace 1160 Center Road Avon, Ohio Customer Support Fax: (440) Literature Request: (440) Technical Service Hotline: BRAKING AWBPC /2012