Non-Metallic Weatherproof Boxes, Covers and Lampholders
|
|
- Kerry Carson
- 6 years ago
- Views:
Transcription
1 Non-Metallic Weatherproof oxes, s and Lampholders pplications Marine rated boxes and covers are ideal for use in highly corrosive areas, beaches, docks, pools, or other wet location areas. Use in branch circuit wiring for wet, damp or dry locations. May be used as a junction box or a device box for switches, receptacles, GFCI s etc. Lampholders are for use in exterior and interior applications to provide safety and security for driveways, doorways and walkways. Features Rugged PVC or polycarbonate construction prevents entry of dirt, dust and moisture. Resistant to impact, heat or low temperature distortion, and mold. Mounting can be achieved with formed in place mounting lugs. Smooth, accurately tapped hubs prevent wire abrasion. Clear UL marking and volumetric marking cast into each box facilitate electrical inspection. Continuous box and cover compression ensure complete sealing at gasket interface to prevent moisture entry. Lockable covers. Closure plugs (2) provided with each box. Mounting hardware and gasket provided with each cover. Locking swivel knuckle on lampholders permits positive lamp positioning and accurate directional aiming. Lampholders are supplied with locknuts, porcelain sockets and internal gaskets for reliability and weather protection. Complete installation instructions provided with each item. Standard s/finishes oxes: PVC s: PVC or polycarbonate screws: Nickel plated steel Gaskets: closed cell foam Sockets: porcelain (lampholders) NEC/CEC Certifications and Compliances culus Listed: E109438, E CS Standard: C22.2 No (2008), C22.2 No. 42.1, C22.2 No Most of the boxes, covers and lampholders are individually shrink wrapped, labeled and bar coded for ease of handling and identification. Sturdy corrugated boxes with easy lift-off top with shrink wrapping facilitate merchandising. 262
2 Non-Metallic Weatherproof Outlet oxes Closure plugs and mounting lugs included. CS Standard: C22.2 No (2008), Depth (inches) Wiring Cubic Inch Capacity Hub Size (inches) No. Of Hubs Color /2 3 WSM150GNM /2 3 WSM150WNM /2 7 WSP25075GNM /2 7 WSP25075WNM /2 5 WRX50GNM /2 5 WRX50WNM G E G C E F H I D C D I I C F E H I F WSM WSP WRX D C D E F G H I (1.87) (2.8) (3.3) (1.4) (4.6) (3.25) (2.0) (0.6) WSM150GNM (1.87) (2.8) (3.3) (1.4) (4.6) (3.25) (2.0) (0.6) WSM150WNM (4.6) (5.1) (4.6) (3.1) (1.3) WSP25075GNM (4.6) (5.1) (4.6) (3.1) (1.3) WSP25075WNM ( (4.3) (5.0) (0.9) (2.8) (3.5) (1.5) (0.6) WRX50GNM ( (4.3) (5.0) (0.9) (2.8) (3.5) (1.5) (0.6) WRX50WNM UL Listed Marine 263
3 Non-Metallic Weatherproof s CS Standard: C22.2 No (2008), For use with devices Color WC14GNM (2.9) (1.9) lank Universal (4.6) WC14WNM 3.20 (0.1) WCT1GNM (3.0) (1.9) Toggle (4.8) (3.3) WCT1WNM (1.4) WHD1GNM (4.8) Lockable Duplex (3.0) WHD1WNM (0.7) WC1350GNM 1-Gang Lampholder Universal Lampholders (4.8) WC1350WNM (3.0) (1.2) culus Listed Marine culus Listed 264
4 Non-Metallic Weatherproof s CS Standard: C22.2 No (2008), For use with devices Color WC24GNM (4.8) lank Universal (4.8) (3.3) WC24WNM 6.30 (0.2) WVTG2GTG (4.8) GFCI/Switch (Red Toggle) (4.8) (2.6) WVTG2GTW WVTGGDT Duplex/Switch (Red Toggle) (4.8) (2.9) (0.9) WVTGWDT (1.6) (4.8) Switches (Not Included) WVTT2GNM WVTT2WNM (4.8) (4.8) (0.9) (3.3) culus Listed Marine culus Listed 265
5 Non-Metallic Weatherproof s CS Standard: C22.2 No (2008), For use with devices Color WVTGUGNM (2) GFCI or (2) Duplex* (4.8) (2.6) WVTGUWNM (1.3) (4.8) (0.7) WCRGNM lank Universal (3.5) (4.3) WCRWNM (3.5) 3.80 (0.2) WCR350GNM (3.5) (2.5) Lampholder Universal Lampholders (3.5) (2.5) (4.5) WCR350WNM (1.2) WLIGNM Lampholder Universal Lamps 54.4 (2) 54.2 (2) WLIWNM 98.2 (4) culus Listed culus Listed Marine 266
6 One-Gang Die Cast Weatherproof In-Use s with Inserts pplications For use in damp or wet locations. Features Extra-Duty rated per the requirements of the NEC. Provides weather protection with cover closed and cords plugged in. Multi-height lever adjusts to create a cover depth of 2-3/4 or 3-1/2. Impact rated. dhesive sealing gasket factory installed to ease installation. Reinforced hinge withstands 40 lbs. stress test. inserts snap into place without the use of tools. Extra-large cord opening for heavy gauge cords. Sleek industrial design. Lockable. Standard s/finish ody/cover: die cast aluminum Stamped steel zinc plated Certifications and Compliances UL Standard: 514D culus Listed: E Gang In Use Vertical WCIU1DV (4.61) (3.07) C (2.39) (6.82) C (2.97) (3.50) 1-Gang In Use WCIU1DH (2.83) (3.07) C (2.06) (5.17) (5.26) (2.74) Duplex GFCI Switch 2-1/8" 1-11/16" 1-5/8" 1-3/8" Duplex dapter GFCI dapter 2-1/8" dapter 1-5/8" Ring Switch dapter 2-1/8" dapter 1-11/16" Ring 1-5/8" Ring 1-5/8" Ring 267
7 Two-Gang Die Cast Weatherproof In-Use with Inserts pplications For use in damp or wet locations. Features Extra-Duty rated per the requirements of the NEC. Provides weather protection with cover closed and cords plugged in. Multi-height lever adjusts to create a cover depth of 2-3/4 or 3-1/2. Impact rated. dhesive sealing gasket factory installed to ease installation. Reinforced hinge withstands 40 lbs. stress test. inserts snap into place without the use of tools. Extra-large cord opening for heavy gauge cords. Sleek industrial design. Lockable. Standard s/finish ody/cover: die cast aluminum Stamped steel zinc plated Certifications and Compliances UL Standard: 514D culus Listed: E2527 In Use WCIU2SD (4.61) (4.61) C (2.39) (6.82) (5.24) (3.16) Duplex GFCI Switch 2-1/8" 1-11/16" 1-5/8" 1-3/8" Duplex dapter GFCI dapter 2-1/8" dapter 1-5/8" Ring Switch dapter 2-1/8" dapter 1-11/16" Ring 1-5/8" Ring 1-5/8" Ring 268
Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures
Applications Use in branch circuit wiring for wet, damp or dry locations. May be used as a junction box or a device box for switches, receptacles, GFCIs, etc. Lampholders are for use in exterior and interior
More informationCat Description Finish. 1 Hole Plug Gray /4 Hole Plug White /4 Hole Plug Bronze /4 Hole Plug Gray 10 30
Lampholder & Bar Coded For 75 Thru 150 Watt PAR 38 Lamps Extra Long Wire Leads for Easy Hook-Up Locking Swivel Knuckle Assures Positive Lamp Positioning and Provides Pinpoint Directional Aiming Lampholder
More informationCover more applications with the most versatile Weatherproof Covers on the market
Cover more applications with the most versatile Weatherproof Covers on the market Intermatic.com Our durable line-up of Die-cast and Plastic Weatherproof Covers offers long-lasting protection in all types
More informationMulberry Metal Products Seattle Stock Sheet
Weatherproof Lampholders (catalog page B23) 30001 Die Cast Lampholders Residential Grade Aluminum 36 39 lbs. 30002 Die Cast Lampholders Residential Grade Natural 36 39 lbs. 30003 Deluxe Lampholder Gray
More informationWeather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
More informationAluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
More informationWallplates & Weather Protective Covers
SECTION C Wallplates & Weather Protective Covers Our broad offering of wallplates are the final touch for any application and are available in standard size, mid-size and oversize. Choose from a variety
More informationStandard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors
More informationCovers for Cast Iron or Aluminum Device Boxes
Single Gang Blank cover for enclosing splices and taps where device not used. Sheet DS100 Flush Sheet steel DSS100 For GFI receptacles. Sheet steel DS23 GFI For square handle general use snap or toggle
More informationU-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
More informationPlugs and Receptacles: Hazardous Location
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Plugs and Receptacles Plugs and Receptacles: Hazardous Location Applications Locations where receptacles are used with stationary or portable
More informationFM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
More informationWP Plugs and DS Receptacles For FS and FD Cast Device Boxes
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes Weatherproof 3F Application: WP plugs and DS receptacles are used: wherever dust, dirt, moisture and corrosion are a problem outdoors or in locations
More informationFM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More information1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens Part #: HALPRM-1000WMH Made in the USA The extremely durable Larson Electronics HALPRM-1000WMH metal halide
More informationForm 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
More informationAreamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
More informationWeatherproof Boxes & Covers
Two sizes: 1.96" and 2.32" diameters to cover 15A/20A Straight Blade and 15A/20A/30A Turnlok devices. Covers fit all competitive flanged inlets and outlets. Stainless steel mounting screws resist corrosion.
More informationFM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationReceptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
More informationEast Central College
SECTION 262726 - WIRING DEVICES PART 1 - GENERAL 1.1 WORK INCLUDES A. Base and Alternate Bids: 1. Contractor Provide: a. Wall switches. b. Receptacles c. Device plates and decorative box covers. 1.2 RELATED
More informationFM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
More informationReceptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
More informationForm 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More information1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC
1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC Part #: MHFL-1000W Made in the USA The powerful and efficient MHFL-1000W metal halide light fixture from Larson
More informationArktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed
Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,
More informationApplications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
More informationRigid/Aluminum Conduit Bodies, Gaskets and Covers
Rigid/luminum Conduit odies, Gaskets and Covers Conduit odies, Covers and Gaskets Weatherproof oxes and Covers pplications Junction for branch conduits Series bodies for Rigid and IMC conduit maintain
More informationPredator Medium Floodlight Wet Location
Predator Medium Floodlight Wet Location Installation and Maintenance Manual AFTER INSTALLATION DELIVER THIS MANUAL TO OWNER IMPORTANT SAFETY INSTRUCTIONS -READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING
More information220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount Part #: HAL-PRM-250W-HPS-220V-PT Page: 1 Made in the USA The efficient HAL-PRM-250W-HPS-220V-PT high pressure sodium
More informationHubbell Marine Isolation Transformers 15 kva and 25 kva Models
Shore Power System 15 kva and 25 kva Models Protects Sensitive Equipment on Board Virtually Eliminates Potential for In-Water Stray Current Can be wired per ABYC E-11 for either a Polarization or Isolation
More informationAreamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
More informationIEC 309 Plugs, Connectors, Receptacles, and Inlets
IEC 309 Plugs, Connectors, Receptacles, and Inlets Applications: Where complete protection against dirt, dust, and water jets is required In damp or corrosive locations In areas prone to vibration, hard
More informationFCW3043 ADA FCW3045 ADA FCW3042 ADA FCW3040 ADA
FCW3043 2.5 in FCW3045 2.3 in FCW3042 2.3 in FCW3040 2.2 in 120 www.fclighting.com *Consult website for updated specification sheets regarding detailed information and performance. FC Lighting, Inc. 2012.
More informationSpring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
More informationENR Value Series Dead Front Interlocked Circuit Breaking Receptacles
ENR Value Series Dead Front Interlocked Circuit Breaking s Cl. I, Div. & 2, roups B, C, D Cl. II, Div. & 2, roups F, Cl. III, 7BCD, 9F, 2 Dust-Ignitionproof Raintight et Locations ENP Plugs Applications:
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
More informationMipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
More informationAreamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
More informationCode Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
More informationSaturn Cutoff. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: SAC Saturn Cutoff SAC
Date: Customer: Project: Type: Qty: Saturn Cutoff Order Code: SAC - - - - - - - - SAC Series SAC Saturn Cutoff Pole Order Code: - - - Series Height Finish Options Optics R Type II Distribution R Type V
More informationD-Sub adapter Cable entry protection with metric cable entries Cable entry protection with Pg cable entries
Contents Page D-Sub adapter... 40.02 Han Split Hood... 40.04 Cable entry protection with metric cable entries... 40.06 Cable entry protection with Pg cable entries... 40.08 Coding for Hoods/Housings and
More informationamericanfittingscorp.com t: e:
Reusable Fittings / Straight Connectors Size Range: 3/8 to 5 Liquid Tight Connectors Reusable Fittings Industrial specification grade, screw machined steel, zinc plated UL Rated Liquid Tight Includes sealing
More informationFV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
More informationD2P and EWP Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
Applications Protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp, wet or corrosive conditions. D2P Series designed for use in
More informationSpec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
More informationWIREMOLD Ratchet-Pro Series Floor Boxes
WIREMOLD Ratchet-Pro Series Floor Boxes Wiremold Single & Dual-Service Round Floor Boxes Wiremold Ratchet-Pro Series Floor Boxes provide single- and dual-service capability in a variety of easyto-install
More informationSTRAIGHT BLADE PLUGS & CONNECTORS
STRAIGHT BLADE PLUGS & CONNECTORS Quick-thread assembly screws and cord-grip screws come backed-out, ready-to-wire. See-through, thermoplastic terminal chamber for clear view of terminals and wire connections.
More informationC13 / C15 / C18 SOUND ATTENUATED ENCLOSURES
/ / SOUND ATTENUATED ENCLOSURES US Sourced Diesel Generator Set - 750 60 Hz Image shown may not reflect actual configuration Features Robust / Highly Corrosion Resistant Construction Factory installed
More informationC13/C15/C18 Sound Attenuated Enclosures. Features. Enclosures. U.S. Sourced Diesel Generator Set kw 60 Hz
// Sound Attenuated Enclosures U.S. Sourced Diesel Generator Set - kw 60 Hz Image shown may not reflect actual configuration Features Robust/Highly Corrosion Resistant Construction Factory installed on
More informationHID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
More informationP-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant Applications Protection and control of electrical equipment and circuits
More informationForm 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
More informationHazardous Factory Sealed Control Devices
Hazardous Factory Sealed Control Devices Description Page No. Application/Selection 428, 429 Dimensions 40 Manual Motor Starting Switches & Enclosures EDS Series 440, 44 Pilot Lights EFS Series 45 Pilot
More informationCONNECTORS & RECEPTACLES
60 HEX NUT Used in mounting rear or front of panel receptacles LOCK WASHER Prevents rear or front of panel receptacle from working loose when installed TYPICAL SL172F REAR MOUNT RECEPTACLE THREADED BUSHING
More informationMaterial, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
More information1-1/2 AL LB FM7 CND BD. Features. Material, Color, and Finish. Dimensions and Weight. Descriptions. Manufacturer Information
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB57SA 1-1/2 Al LB FM7 CND BD Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit Product Category
More informationIndustrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent
NEC/CEC: Type 3R, 4X IP66, IP67 Suitable for use in Wet Locations Marine Outside Type (Salt Water) Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
More informationT38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More informationMercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
More information8600 SERIES. SPACE$SAVER DOORWARE Page C SPACE$SAVER. Page C-6. PREMIER DOORWARE Page C-11 ASSURED EXCELLENCE 8200 SPACE$SAVER
8200 SPACE$SAVER 8000 PREMIUM 8600 SINGLE CONTENTS 8200 SERIES SPACE$SAVER DOORWARE Page C-2 8200 SPACE$SAVER 8200 SELF-CLOSING SPACE$SAVER Quick, easy horizontal sliding door operation with these space
More informationCONTROLS: NEC/CEC EXPLOSIONPROOF CONTROL STATIONS AND SWITCHES. Applications. Illustrated Features
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and
More informationLB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
More information25 Sign / Wall Lighter 4324 LED Series Extruded Aluminum, PicoPrism LED revision 9/9/15 kl_4324led_series_spec.pdf
Type: Catalog number: / / Wattage / Lamp(s) Finish Options: See page 2 ing Options: See pages 3-5: Approvals: Date: Page: 1 of 5 Specifications ORDERING INFORMATION Light Engine Length l 4324P70 / 16L3KUV
More informationAM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
More informationArrow Hart. environment devices. Watertight, severe duty and corrosion resistant devices for harsh industrial environments
Eaton's Arrow Hart Complex environment devices Complex environment devices, severe duty and corrosion resistant devices for harsh industrial environments Arrow Hart NEMA and Non-NEMA quick reference guide
More informationLightWave Lighting Technology
LightWave Lighting Technology About the company Since the inception of the company in 1998, LightWave has utilizes its expertize in lighting technology to make products that are energy efficient, cleaner
More informationOverall Dimensions. Specifications
Overall Dimensions EFI Mastfitter Mount (MA2) (standard) A 70-400W HID unit: 13 Housing A B C 13.3 11.3 23.3 (33.78cm) (28.70cm) (59.18cm) 750-1000W HID and 85-165W QL unit: 19 Housing A B C 19.4 14.9
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Newport Harbor Mate Utility Center
Newport Harbor Mate Dimensions Height: 14.50" (368.30 mm) Width: 10.50" (266.70 mm) Depth: 10.40" (264.16 mm) Newport Harbor Mate Utility Center Diagram 2.77" Approximate Weight: 11 lbs. (5.0 kg) 10.31"
More information1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
More informationRELOC Modular Wiring Specialty Lighting and Power Systems
RELOC Modular Wiring Specialty Lighting and Power Systems Family FileName Description RevisionDate Access Floor Wiring DB DB Distribution Box 10/15/1999 FM FMI3 Floor Module 03/15/2002 Power Wiring System
More informationWeatherproof Products
Technical Specifications pplications : Junction for branch conduits in hazardous locations ccessible wiring chamber provides a convenient location to maintain or change a system, pull conductors and make
More informationLIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
More informationGeneral Specifications for Lighthouse Power Pedestal
Dimensions Height: 44.00 11 (1117.60 mm) Width: 13.67" (347.22 mm) Depth: 13.75" (349.25 mm) Lighthou98 Base Diagram ---13,75 1 --- Approximate Weight: 30 lbs. (13.6 kg) Multiply base dimensions by 25.4
More informationEaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
More informationWE MAKE PRODUCTS THAT MAKE A DIFFERENCE 12070 Burke Street Santa Fe Springs, CA 90670 Fax: 800-597-7757 B-FE-0509 www.phillipsind.com ABS LECTRACOIL 5 YEAR WARRANTY Assembly Only See website for details
More informationC inches. D inches. E inches
K L ACCESS TTNGS No other manufacturer offers such an extensive range of access fitting sizes (1/2" to 4") or hub configurations (L, T, LL, LR, T, C, E). CSA certified and UL listed, Scepter access fittings
More informationORDERING INFORMATION: 120 Volts (120)
Bull38 A weather tight unit fabricated from durable grade die-cast aluminum & fully sealed, gasketed glass lens. Mount: 1/2 threaded adjustable knuckle mount Porcelain medium base socket Thermoset polyester
More informationApplications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
More informationTwist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
More informationW Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
More informationUV16 vandal resistant, wet/damp location emergency lighting
UV16 vandal resistant, wet/damp location emergency lighting 120/277 VAC, 60 Hz dual voltage input Maintenance-free, sealed lead calcium battery Molded from high-impact polycarbonate Simplified installation
More informationCondulet Cast Device Boxes and Covers Application and Selection
F Condulet Cast and Covers Application and Selection Application: Cast device boxes are installed in conduit and cable systems to: Accommodate wiring devices Act as pull boxes for conductors in a conduit
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles Industrial Heavy Duty Non-Hazardous Areas
1P Arktite Heavy Duty Circuit Breaking s and s Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically operated
More informationCable & Wire Management
Cable & ire Management ay-in ireway Data Sheet Cable & ire Management pplication ouses runs of control and power cable Protects against circulating dust, falling dirt and dripping noncorrosive liquids
More informationDuplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, with Steel Cover
www.cranepumps.com Duplex Jobsite Wired Basin Package Non-Sparking Stainless Rail Non-Sparking, Class I, Group D, Division 1, with Steel Cover Pre-Packaged Fiberglass Systems Specifications: inches (mm)
More informationFor complete photometric data, refer to the back cover of this brochure.
The new standard for emergency lighting in adverse environments has arrived. Completing the Lightalarms family of NEMA-4X rated exit signs and combo units, the Severe V Series battery units and ELF650
More informationExplosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm
Explosion Proof Dock Light - Class I, Div. I, Groups C & D - 70 Watt LED Lamp - Extension Arm Part #: EPL-DL-70LED-24 Page: 1 Made in the USA The EPL-DL-70LED-24 Explosion Proof Dock Light is U.L. approved
More informationProduct Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
More informationCLASS # GAUGE ROUND POWER CORDS
16 GAUGE ROUND POWER CORDS These 16 gauge, 3 wire orange power cords will stay flexible down to -40. They feature a heavy duty double vinyl jacket insulation and molded male and female ends. The cords
More informationN2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.
Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions
More informationTRAILER CONNECTORS CONNECTEURS POUR REMORQUES CONECTORES PARA TRAILERS Y REMOLQUES. 10 Trailer Sockets. 11 Nose Boxes & Socket Breakers
02 10 Trailer Sockets 11 Nose Boxes & Socket Breakers 12 Trailer Plugs 16 Junction Boxes 16 Corrosion Preventive Sealant TRAILER CONNECTORS CONNECTEURS POUR REMORQUES CONECTORES PARA TRAILERS Y REMOLQUES
More informationArktite Plugs and Receptacles Industrial Heavy Duty Hazardous
Arktite Plugs and Receptacles Industrial Heavy Duty Hazardous Description Page No. Application/Selection 1000, 1001 Arktite Delayed Action Circuit Breaking Technical Data 1002, 1003 20 & 30A CPS Receptacle
More informationArktite Heavy Duty Circuit Breaking Plugs and Receptacles
1P Arktite Heavy Duty Circuit Breaking s and Receptacles Industrial Heavy Duty Non-Hazardous Areas Application: Arktite circuit breaking plugs and receptacles are used: to supply power to portable electrically
More informationPOWER CORDS CORDONS D'ALIMENTATION CABLES DE ENERGÍA. 4 ABS Power Cords. 5 Non-ABS Power Cords. 5 ISO Cords. 6 RV Power Cords. 7 Lift Gate Cables
01 4 ABS Power Cords 5 Non-ABS Power Cords 5 ISO Cords 6 RV Power Cords 7 Lift Gate Cables POWER CORDS CORDONS D'ALIMENTATION CABLES DE ENERGÍA 2 ELECTRICAL CONNECTION AND ACCESSORIES CATALOG 1.800.268.5612
More informationCatalog # Project. Comments. Prepared by. 11" [279mm] 8-3/4" [222mm] ESCUTCHEON PLATES. 2-5/8" [67mm] 3/4" [19mm] Dia. Hole. 3" [77mm] 1-1/2" [39mm]
DESPTION SPECIFICATION FEATURES at The patented Lumark Crosstour MAXX LED Wall Pack Series of luminaries provides low-profile architectural style with super bright, energy-efficient LEDs. The rugged die-cast
More informationWatertight Wiring Devices
atertight iring evices atertight and eather Protective evices for emanding nvironments Plugs and onnectors one seal adjusts to any cable range Triple bypass seal keeps water away from electrical connections
More informationSwitch & Outlet Boxes Technical Data
Switch & Outlet Boxes Technical Data General Information: A box, with or without a bracket or bar hanger, intended for support of a fixture/luminaire weighing 50 lbs. or less is marked FOR FIXTURE/ LUMINAIRE
More informationControl Device System NEC Series ConSig 8040
16113E00 > Enclosure made of glass fibre reinforced polyester resin > Modular design > 3 sizes available > Individual units can be combined into larger units > Standard and customer-specific versions >
More information