Automation systems for industrial sectional doors and folding doors
|
|
- Gerald Parker
- 6 years ago
- Views:
Transcription
1 246 Automation systems for industrial sectional doors and folding doors All doors in industrial buildings and warehouses can be automated with FT operators. These extremely sturdy and compact systems can be used for even the most difficult applications and are capable of operating shutters of all sizes safely and regularly in any installation space. uide to choosing Operator type Max surface area Voltage Max speed Operator pag. 24V 30rpm ARO 250 industrial sectional doors industrial folding doors 20m² 25m² 230V 33rpm KT PASO C UP V 33rpm PASO CJA V 33rpm PASO CJA V 24rpm PASO CJA V 24rpm PASO CJA V 24rpm PASO CJA V 24rpm PASO CJA m² 24V 18rpm ARO m² - 2.4m² 400V 24rpm KT PASO C UP TR V 24rpm PASO CJA645W V 24rpm PASO CJA645W V 24rpm PASO CJA645W V 24rpm PASO CJA645W V - A T V - A V - FOR R V - FOR RSA 254 6m² 230V - FOR 254
2 nstallation guide 247 A D H N Operator Control unit Receiver Photocell Sensitive edge Post Flashing eacon Control system (key selector switch, keypad, badge reader) Junction box 2x1.5 6x1 3x1.5 R 58 5x1 2x1 4x2.5 N H A H Argo, D A N H Pegaso H, D A A N Forb H H
3 248 Automation systems for industrial sectional doors and folding doors VNR D ARO P C UP TR O C 01 P C UP MONO O C W01 ACOR N APHA SD R 5 RA C MA THAA THAA P ATAR P ARO ARO PASO CJA645W11 PASO CJA62001 PASO CJA62011 PASO CJA PASO CJA62502 PASO CJA62511 PASO CJA62512 PASO CJA645W01 PASO CJA645W02 PASO CJA645W12 FOR FOR R A T A recommended compatible built-in PRO Opt. Alternating functions; one cuts out the other Requires PROXMA handheld programmer Requires optional board
4 Control unit characteristics 249 R 5 RA C MA ATAR P VNR D APHA SD ACOR N THAA THAA P MOTORS POWR SUPPY Motor 1 230V output Motor 2 230V output Motor 1 24V output Motor 2 24V output MT SWTCH NPUTS Single for Opening 1 Single for Closing 2 Separate nputs for Opening Separate nputs for Closing ncoder CONTROS NPUTS Start 1 1 Pedestrian Start 2 1 nternal Start Open Close 2 1 Timer 1 Pedestrian Timer 1 MRNCY STOP Stop SAFTY SYSTMS NPUTS Photocells Photocells for Opening 2 Photocells for Closing Photocells nputs Check Safety dge 2 Safety dges nputs Check AUXARY NPUTS/OUTPUTS Flashing eacon Courtesy ight 4 Zone ight 4 Stairs ight 5 Solenoid ock 6 Opt. Opt. Opt. Opt. lectromagnet 6 ate Open Warning ight Second Radio Channel Alarm 5 MOTORS CONTROS Torque Control Obstacle Recognition Dynamic Path Tracking Speed Control Slowdown Control Speed and Slowdown Control rake Opening Delay Control Closing Delay Control ackup atteries Connection Self Setting FUNCTONS Automatic Re-closing Control (TCA) Open Pulse locking TCA Pulse locking Close Pulse locking Photocell Trigger Setting Fast Close Pre-Alarm 2 Steps 8 3 Steps 4 Steps 8 Deadman Feature Closing Stop Pressure Water Hammer Traffic-ight Management Opt. Opt. Opt. MSCANOUS Accessories power supply 24V 1A 180 ma 200 ma 180 ma 200 ma 200 ma 180 ma 1000 ma Antenna uilt-in Receiver earning via Radio Commands -ink R-Ready Self-Diagnosis PRO PRO Statistics Management PRO PRO Central Commands Management Opt. Opt. Conformity to N N12445
5 250 ARO Description 24V electromechanical operator for sectional garage doors installable in residential, industrial and commercial environments. The sturdy mechanical structure and the microprocessor technology of the control unit allow the intensive use of the operator, whilst at the same time guaranteeing reliability and long life. The D-Track torque control system combined with the absolute encoder ensure maximum precision in the control of the gate movement and the detection of obstacles. xclusive encoder position reset knob for fast, safe installations. imit switch based on absolute encoder technology, guaranteeing maximum reliability and stopping precision. Control unit with on-board programming display and D-Track torque, speed and position management and control system. ncorporated dual channel radio receiver. Summary table Code Name Voltage Door surface area Max torque P ARO 24V 20m² 55Nm A P ARO 24V 35m² 80Nm A egend
6 251 Dimensions Technical features ARO ARO Max speed 30rpm 18rpm Control unit VNR D ARO VNR D ARO Max surface area 20m² 35m² Power supply 24V 24V Power input 240W 240W Output revolutions 30rpm 18rpm Shaft rotation speed 30rpm 18rpm Type of limit switch Absolute encoder Absolute encoder Slowdown Yes Yes mpact reaction D-Track D-Track ocking Mechanical Mechanical Manual cycle Non reversing Non reversing Release Cord or steel cable Steel cable Frequency of use ntensive ntensive nvironmental conditions from -15 C to 0 C Protection rating P40 Actuator weight 10kg 10kg
7 252 PASO CJA Description 24V electromechanical operator for semi-intensive use, for automation of industrial sectional doors up to 25 m2 (Pegaso Cja 625) or up to 45 m2 ncoder managed limit switch, it allows a quick set up from the ground. Max. opening speed 24rpm and max. torque 70Nm (Pegaso Cja625); max. opening speed 24rpm and max. torque 100Nm (Pegaso Cja 645) Management system for stop and intermediate limit switches based on absolute encoder technology with settable zero position. Control unit with deadman feature on-board operator Ready-to-use cables with quick-fit connectors. Summary table Code Name Voltage Door surface area R KT PASO C UP TR 400V 45m² R KT PASO C UP 230V 20m² P PASO CJA V 20m² P PASO CJA V 20m² P PASO CJA V 25m² P PASO CJA V 25m² P PASO CJA V 25m² P PASO CJA V 25m² P PASO CJA645W01 400V 45m² P PASO CJA645W02 400V 45m² P PASO CJA645W11 400V 45m² P PASO CJA645W12 400V 45m²
8 253 Dimensions min 346 max 454 min 127 max Technical features PASO CJA62001 PASO CJA645W11 PASO CJA62011 PASO CJA62501 PASO CJA62502 PASO CJA62511 PASO CJA62512 PASO CJA645W01 PASO CJA645W02 PASO CJA645W12 Max speed 33rpm 24rpm 33rpm 24rpm 24rpm 24rpm 24rpm 24rpm 24rpm 24rpm Max surface area 20m² 45m² 20m² 25m² 25m² 25m² 25m² 45m² 45m² 45m² Power supply 230V 400V 230V 230V 230V 230V 230V 400V 400V 400V Power input 750W 980W 750W 750W 750W 750W 750W 980W 980W 980W Shaft diameter 25.4mm Travel 18giri 18giri 18giri 18giri 18giri 18giri 18giri 18giri 18giri 18giri Max torque 50Nm 100Nm 50Nm 70Nm 70Nm 70Nm 70Nm 100Nm 100Nm 100Nm Shaft rotation speed 33rpm 24rpm 33rpm 24rpm 24rpm 24rpm 24rpm 24rpm 24rpm 24rpm Type of limit switch ncoder ncoder ncoder ncoder ncoder ncoder ncoder ncoder ncoder ncoder ocking Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Mechanical Release Frequency of use Chain ntensive Chain Semiintensive Chain Semiintensive Chain Semiintensive Double cable Semiintensive Chain Semiintensive Double cable Semiintensive Chain Double cable Double cable ntensive ntensive ntensive nvironmental from -10 C to 0 C conditions Protection rating P54 P55 P54 P55 P54 P55 Actuator weight 12.4kg 12.2kg 12.4kg 12.4kg 11.2kg 12.4kg 11.2kg 12.2kg 11kg 11kg O C 01 Control board for PASO CJA single phase operators O C 01 D Application: control panel for one operator PASO CJA monophase series oard power supply: 230V single-phase Operator power supply: 230V monophase
9 254 FOR Description Hydraulic operator for very intensive use for industrial folding doors, maximum two panels per leaf. Designed for the harshest of use conditions, combining strength with the proven reliability of hydraulic operators. The hydraulic slowdown guarantees silent, smooth movements on even the biggest doors. Also, the adjustment screw makes it possible to adapt the slowdown intensity to all needs. The by-pass valves allow the exact setting of the torque separately and independently for opening and closing. All-aluminium structure with high-resistance anodising treatment. Summary table Code Name Voltage Door surface egend area P FOR 230V 6m² A P FOR R 230V 2.4m² A P FOR RSA 230V 2.4m² A
10 255 Dimensions ,5 137, Technical features FOR FOR R FOR RSA Control unit R 5 Max surface area 6m² 2.4m² 2.4m² Power supply 230V 230V 230V Power input 250W 250W 250W Opening or closing time 25sec. 13+slowdownsec. 13+slowdownsec. Slowdown No Yes Yes mpact reaction Sure-safe anti-crushing system with 2 bypass valves Sure-safe anti-crushing system with 2 bypass valves Sure-safe anti-crushing system with 2 bypass valves ocking Hydraulic Hydraulic Hydraulic Release ever or steel cable ever or steel cable ever or steel cable Frequency of use Very intensive Very intensive Very intensive nvironmental conditions from -15 C to 0 C Protection rating Actuator weight 12.5kg 13kg 13kg P20 R 5 Universal control panel for one or two 230V operators W R 5 D Application: universal control panel for one or two operators oard power supply: 230V single-phase Operators power supply: 230V single-phase W Main features: removable terminal blocks, programming and diagnostics with display, incorporated dual channel receiver, plug-in connector for additional receiver, electric snap latch or magnetic lock connection, electronic torque limiter, electronic slowdown during opening and closing, separate limit switch inputs for each motor, possibility of traffic-light management and hydraulic operator pre-heating with SSR5 board Main functions: automatic re-closing, separate motor working times, stays locked when closed, water hammer, 2/3/4 step logic, partial opening, fast closing, separate opening and closing Compatibility: R 4
11 256 A Description Range of electromechanical operators for industrial folding doors, maximum two panels per leaf. Available also in 24V version to guarantee maximum anti-crushing safety and precision in movement and slowdown. Control unit with programming display, automatic setting menu, simplified programming and virtual encoder in 24V version. uilt-in, adjustable, single-cable electromechanical limit switch system. Removable steel cable system. Summary table Code Name Voltage Door Panel egend weight length P A T 24V 250kg A 2m P A 230V 250kg A 2m
12 257 Dimensions Technical features A T A Control unit THAA ATAR P Power supply 24V 230V Power input 40W 300W Max torque 300Nm 320Nm Type of limit switch lectric lectric Slowdown Yes No mpact reaction D-Track lectric clutch ocking Mechanical Mechanical Release Release handle with personal key Release handle with personal key Frequency of use Semi-intensive Semi-intensive nvironmental conditions from -15 C to 0 C Protection rating P4X P44 Actuator weight 16kg 16kg THAA Control panel for one or two 24V operators for swing gates THAA D Application: control panel for one or two 24V operators for swing gates oard power supply: 230V single-phase Operators power supply: 24Vdc 180W max each operator Main features: removable terminal blocks with new standard colour-coding, simplified scenario-based programming with display and incorporated dual channel receiver, D-Track anti-crushing system, slowdown during opening and closing and electronic self-learning Main functions: automatic re-closing, fast closing, partial opening, deadman feature Compatibility: RA C MA, RA, RA R, RA MA R
13 258 Product accessories ARO RCA N ever for ARO with steel cable, length 3.5 m T AT P Set of backup batteries for RA C MA, RA C X, HYDRA N, ARO C RCA N ever for ARO with steel cable, length 7 m CKK N Pack of mounting tabs for ARO and ARO PASO CJA O C 01 D Control board for PASO CJA single phase operators PASO UP CONTRO 10 D Cable with pre-wired OPN - STOP - COS keypad for PASO UP operators. For adjusting motor limit switches from floor level. ength 10 m O C W01 D Application: control unit for PASO CJA three-phase operators-oard power supply: 400V three-phase-operator power supply: 400V three-phase PASO ADA N Adapter for installation on doors with 1 1/4 shaft PASO CA NC 5 D Pre-wired connection cable between operator and external control unit for the management of encoder. enght 5m P CCP N xtension for PASO C operators chain. ength 4 m PASO CA NC 10 D Pre-wired connection cable between operator and external control unit for the management of encoder. enght 10m SFZ N Additional fixing bracket kit. To be used on chain drive installations. PASO CA AUTO 5N D Pre-wired connection cable between P NT and external control unit electric power supply ength 5 m P 12/USS S N Z12 pinion gear for industrial sectional doors, for 1 (25.4 mm) shafts PASO CA AUTO 10N D Pre-wired connection cable between P NT and external control unit electric power supply ength 10 m P 14/USS S N Z14 pinion gear for industrial sectional doors, for 1 (25.4 mm) shafts PASO CA MONO D Pre-wired power supply cable for PASO single phase operators. ength 1 m P 18/USS S N Z18 pinion gear for industrial sectional doors, for 1 (25.4 mm) shafts PASO CA TR D Pre-wired power supply cable for PASO three-phase operators. ength 1 m P 30/USS S N Z30 pinion gear for industrial sectional doors, for 1 (25.4 mm) shafts PASO UP CONTRO 5 D Cable with pre-wired OPN - STOP - COS keypad for PASO UP operators. For adjusting motor limit switches from floor level. ength 5 m COR 30 N Z30 gear kit complete with accessories for industrial sectional doors, for 1 (25.4 mm) shafts
14 259 PASO CJA COR 40 N Z40 gear kit complete with accessories for industrial sectional doors, for 1 (25.4 mm) shafts FOR R 5 D Universal control panel for one or two 230V operators W S N xternal key for RMA, FOR, A and A Tì P A THAA D Control panel for one or two 24V operators for swing gates SCS 1 P Serial board for connection to zone and opposing leaves for control units with display-while stocks last A 201 R02 P NPUT/OUTPUT expansion board SCS W P oard for connection to STTO () keypad and COMPASS SM proximity reader-while stocks last P S N xternal key for RMA, FOR, A and A Tì RCA N ever for ARO with steel cable, length 3.5 m THAA P D Control panel for one or two 24V operators for swing gates RCA N ever for ARO with steel cable, length 7 m RA C MA D Control panel for one or two 24V swing gate operators. A 201 R01 P xpansion board for connection of central units with serial controls management ATAR P D Control panel for one or two 230V/300W operators for swing gates and industrial folding doors A 201 R03 P xpansion board for WAND accessories connection management C T AT P Set of backup batteries for RA C MA, RA C X, HYDRA N, ARO A 201 R04 P xpansion board for UTOOTH connection management
15 260 Family accessories KO RCA02 R1 D V two-channel transmitter 433MHz rolling code. Soft touch treatment KO RCA02 R2 D V two-channel transmitter 433MHz, copyable with rolling code. Soft touch treatment KO RCA02 R3 N V two-channel transmitter 433MHz rolling code. Soft touch treatment. Pack of 100 items, numbered for block memorisation KO RCA04 R1 D V four-channel transmitter 433MHz rolling code. Soft touch treatment KO KO RCA04 R2 D V four-channel transmitter 433MHz, copyable with rolling code. Soft touch treatment KO RCA04 R3 N V four-channel transmitter 433MHz rolling code. Soft touch treatment. Pack of 100 items, numbered for block memorisation MTTO RC02 R1 D V two-channel transmitter 433MHz rolling code MTTO RC02 R2 D V two-channel transmitter 433MHz, copyable with rolling code MTTO RC02 R3 N V two-channel transmitter 433MHz rolling code. Pack of 100 items, numbered for block memorisation MTTO RC04 R1 D V four-channel transmitter 433MHz rolling code MTTO RC04 R2 D V four-channel transmitter 433MHz, copyable with rolling code MTTO RC04 R3 N V four-channel transmitter 433MHz rolling code. Pack of 100 items, numbered for block memorisation CP1 00 R03 N CP1 00 R03 N Wall mounting clip for KO RCA and MTTO RC remote controls. 30 unit pack T-OX P Wireless digital keypad 433 MHz Rolling code R P channel wall-mounted radio control with rolling code SK P xternal key selector switch with vandal-proof metal frame SPC D xternal button panel with 2 start-stop buttons. SPC2 D xternal button panel with 2 open-close buttons. SPC3 D Open stop close button panel.
16 261 SPC D xternal button panel with mushroom-head emergency button. RMOT CONTRO P Remote control for adjusting and setting FACON, A ON and ACTV8 FACON P ndustrial presence sensor installable up to 7 m Q Q RADUS TA 230 R1 D Flashing beacon with built-in antenna for 230V motors RADUS TA 230 R2 D Flashing beacon without built-in antenna for 230V motors RADUS TA 24 R1 D Flashing beacon with built-in antenna for 24V motors RADUS TA 24 R2 D Flashing beacon without built-in antenna for 24V motors 00 R01 P Metal guard for TA 00 R02 P Wall mounting for TA series flashing beacons CUA 130 P Pair of self-aligning photocells for external application (range 30 m) Power supply 24V ac/ dc CUA 50 P Pair of built-in adjustable photocells (range 30 m) Power supply 24V ac CUA 180 P Pair of orientable photocells (180 horiz./20 vert.) For external application (range 30 m). Power supply 24V ac/dc DCW P Wireless photocell with possibility of managing infrared or resistive safety edge DCW COVR P Anodised aluminium cover for DCW and CUA180 CUA RF P Reflective photocell for external application (range 12 m) Power supply 24V ac/dc (requires S RFP P111409) F S RFP P Reflector and support for wall mounting and mounting on CC post for CUA RF
17 262 STR N Pair of infrared sensors for DCW VNTMA NS P nfrared device for R C or AR C safety edges (conforms to N Standard) R C N Rubber safety edge (H 30 mm), price per m AR C 2 P Double profile rubber safety edge ( 2000 x H 60 mm) AR C 4 P Double profile rubber safety edge ( 4000 x H 60 mm) AR C 6 P Double profile rubber safety edge ( 6000 x H 60 mm) AR C A 4 P Double profile rubber safety edge with lip seals ( 4000 x H 60 mm) AR C A 2 P Double profile rubber safety edge with lip seals ( 2000 x H 60 mm) AR C A 6 P Double profile rubber safety edge with lip seals ( 6000 x H 60 mm) ONARDO KT P FT impact measurer ONARDO KT UTOOTH P FT luetooth impact measurer CKK N Pack of mounting tabs for ARO and ARO
Automation systems for swing gates hydraulic
70 Automation systems for swing gates hydraulic A wide range of operators designed to respond to the multiple needs of swing gates. BFT automation systems are suitable for any type of gate - heavy, light,
More informationAutomation systems for swing gates electromechanical
86 Automation systems for swing gates electromechanical FT automation systems for swing gates are easy to install and ensure maximum safety and comfort in use. Their extreme versatility makes them the
More informationAutomation systems for garage doors
Automation systems for garage doors Guide to choosing Operator type Door surface area Voltage Frequency of use Overhead garage doors Kits Operator PLUS Sectional garage doors Phebe - PHEBE N Control unit
More informationKUSTOS ULTRA BT KIT A40 FRA
Product Complete range of electromechanical pistons for residential use, suitable for swing gate leaves up to 4 metres wide and weighing up to 500 kg. Code P935101 00002 25 Irreversible electromechanical
More informationComplete range of electromechanical pistons for residential use, suitable for swing gate leaves up to 4 metres wide and weighing up to 500 kg.
Product Complete range of electromechanical pistons for residential use, suitable for swing gate leaves up to 4 metres wide and weighing up to 500 kg. Code P935100 00002 40 Irreversible electromechanical
More informationaccess
184 Table of Contents Access Garage door Motors Dexxo Pro 800 RTS... 188 Dexxo Pro 1000 RTS... 189 Dexxo Optimo RTS... 190 Receiver Axroll NS... 191 Freeroll ESE RTS, RTS receiver for roller garage doors...
More informationVIRGO CONTROL UNIT TECHNICAL FEATURES
Electromechanical operator with articulated arm for residential use, for swing gate leaves of up to 2 metres and 200 kg. Ideal for all installation situations, with a lever system for the simple resolution
More informationGATE AUTOMATION. Swinging and sliding gate automation systems
GATE AUTOMATION Swinging and sliding gate automation systems CONTENTS ARTICULATED ARM OPERATORS FOR E5 pg 1 VIRGO SMART BT A pg 2 IGEA pg 3 ELECTROMECHANICAL OPERATORS FOR PHOBOS pg 4 KUSTOS ULTRA BT A
More informationFor sectional and up-and-over doors. 118 Spinbus 122 SpinbusKit 20/21/ SpinbusKit 23. For up-and-over and articulated doors.
Systems for garage and industrial For sectional and up-and-over doors 118 Spinbus 122 SpinbusKit 20/21/22 124 SpinbusKit 23 126 SpinKit For up-and-over and articulated doors 128 Ten 130 TenKit For sectional
More informationAutomations for garage doors and rolling shutters
Automations for garage doors and rolling shutters Technology Versatility Low consumption BLINKO Flashing LED Technological solutions for safe operation All V2 operators for garage doors allow: - Precise
More informationTHE CHAMPION OF AUTOMATION
Giacomo Giacomelli Cod. B4771000 Last printed October 2006 APRIMATIC S.p.A. Via Leonardo da Vinci, 414 40060 Villa Fontana di Medicina - Bologna - Italy Tel. +39 051 6960711 - Fax +39 051 6960865 info@aprimatic.com
More informationGarage. and Industrial Door Operators. 60 NiceHansa Catalogue NiceHansa Catalogue
Garage and Industrial Door Operators 0 NiceHansa Catalogue 0 NiceHansa Catalogue 0 Hansa Selection guide Follow the arrow and choose the right product For sectional doors, industrial and commercial use
More informationBH30 SERIES Today s digital intelligence moves your gate
BH30 SERIES Today s digital intelligence moves your gate 1 2 3 4 5 6 7 11 9 8 12 10 WHY BRUSHLESS...? Digital, smart, powerful, elegant, robust and all-italian. 8 1 Standby batteries in the event of power
More informationDESIGNED FOR RESIDENTIAL APPLICATION KIT PL600/PL1000 SLIDING GATE OPENERS
SLIDING GATE OPENER DESIGNED FOR RESIDENTIAL APPLICATION KIT PL600/PL1000 SLIDING GATE OPENERS The strongest solution for sliding gates PL600/PL1000 electro-mechanical sliding gate openers are designed
More informationD Vers. 03 ELECTROMECHANICAL AUTOMATION FOR SWING GATES
E5 D811007 15-09-99 Vers. 03 ELECTROMECHANICAL AUTOMATION FOR SWING GATES 122 This product complies with recognised technical standards and safety regulations. We declare that this product is in conformity
More informationType of installation. external motor. underground motor. Leaf max length (m) Leaf max length (m) Max leaf weight (kg) V V V
Type of installation external motor Residential 391 24V 390 230V 390 24V 412 230V 413 230V 415 415 24V S418 402 422 422 PED. S450H Condominium 415 L 415 L 24V 422 422 PED. 400 S450H Industrial 400 Leaf
More informationunipark Parking space saver operator for single CAR space. Gearmotors 24 V DC
unipark Parking space saver operator for single CAR space. Gearmotors 24 V DC 1 1 Control panel 2 UNIP+ARK1 2 3 Max distance from the loop to the UNIPARK 2 m 3 guaranteed parking, with Unipark. Ideal for
More informationRecommended control units: Mindy A824/110. Aluminium Nice release: user-friendly, effortless, sturdy. Flashing light. Digital or key switches
Moby000 For swing gates For swing gates with leaves up to m. Electromechanical gear motor irreversible, 2 Vdc, with magnetic encoder, mechanical stop in opening, surface mounted (MB02). Reliability and
More informationSYSTEMS FOR SLIDING GATES
SYSTEMS FOR SLIDING GATES FOR RESIDENTIAL USE, INSTALLED ALSO INSIDE A COMPACT POST 88 NAKED SLIDING 400 88 SLIGHT 90 SLIGHTKIT FOR RESIDENTIAL AND INDUSTRIAL USE 92 ROBUS 400/600/1000 94 ROBUSKIT 400
More informationCompact Sliding Door Operator Dor-O-Matic 2900 Series
Uniclass L4181 EPIC D181 CI/SfB (31.59) X Compact Sliding Door Operator Dor-O-Matic 2900 Series June 2008 Compact Sliding Door Operator page 1 2900 Series Features & Functions Compact - Automatic Operator
More informationMax. stand-by power without accessories Use frequency 100% Max leaf width Motor Motor powered at 36V with encoder Max.
Automated system for NEW Passage opening 700-3.000 mm Max. leaf weight 110-2x70 Kg FAAC SERIES automated systems are intended for the automation of exits in compliance with European Standard EN16005; in
More informationUL (9050, 9100, 9150) PG. 10 PG.
DoorKing provides a family of vehicular gate operator products and accessories for residential, commercial, industrial and maximum security applications. DoorKing gate operators designed for general access
More informationEasy. Easier. Mhouse.
Easy. Easier. Mhouse. The revolutionary system for automating your home in an incredibly quick and easy way 2006 Catalogue Mhouse Mhouse self fit Kit: everything s easy, everything s included! 2 Mhouse
More informationH30. H30 style Roger Technology conceived with logic ROGER TECHNOLOGY
H30 H30 style Roger Technology conceived with logic SPECIAL PERFORMANCE Electro-mechanical reduction gear available in 5 versions, for sliding gates up to 400, 600 kg. The main structure is in die-cast
More informationDitec automatic pedestrian sliding doors.
Ditec automatic pedestrian sliding doors EN www.entrematic.com Ditec automation: a complete range of products for any requirement Straight-line sliding doors Ditec Civik Quiet and lightweight For next
More informationTRAFFI BARRIE COST EFFECTIVE BARRIER SOLUTIONS TRAFFIC BARRIERS
TRAFFI BARRIE TRAFFIC BARRIERS COST EFFECTIVE BARRIER SOLUTIONS 2 C RS CAME traffic barriers are a blend of design safety and security. The various models are designed for modular applications and the
More informationSafety and convenience for your entranceway
Swing and sliding gate openers for private and commercial applications Safety and convenience for your entranceway Edition 2 3/2015 The 4Ddoors swing and sliding gate openers: Safe, convenient and reliable
More informationSLIDING GATE MOTORS 2
2 SLIDING GATE MOTORS CAME sliding gate range of motors are suitable for residential, commercial and industrial gates. There are solutions from 400Kg up to 3500Kg of the gate leaf weight and from 14m up
More informationSWING GATE OPENERS 24V DC GEAR MOTOR
SWING GATE OPENERS 24V DC GEAR MOTOR FOR RESIDENTIAL USER MANUAL Flashing Light Push Button Control box Gate 2 Gate 1 Index 1. Warnings 2 4. Technical Characteristics 16 2. Product Description 2.1 Applications
More informationEasy. Easier. Mhouse.
Easy. Easier. Mhouse. The revolutionary system for automating your home in an incredibly quick and easy way. Now even with solar energy supply. SOLAR POWER Mhouse self fit Kit: everything s easy, everything
More informationCONTENTS. GENERAL PRESENTATION 2 SAFETY INSTRUCTIONS 2 Caution 2 Safety instructions 2
CONTTS GERAL PRESTATION 2 SAFETY INSTRUCTIONS 2 Caution 2 Safety instructions 2 PRODUCT DESCRIPTION 2 Product components 2 Area of application 2 POINTS TO CHECK PRIOR TO INSTALLATION 3 Preliminary checks
More informationPRODUCT CATALOGUE 2018
PRODUCT CATALOGUE 2018 Innovative, reliable LiftMaster solutions give you the selling advantage. 1 GATE OPERATORS INDEX. LIFTMASTER THE BRAND FOR THE PROFESSIONAL...3 SMART CONNECTIONS - THE SMART SOLUTION
More informationSYSTEMS FOR SWING GATES
SYSTEMS FOR SWING GATES SURFACE MOUNTED 40 TOONA 4 4 TOONA 44 TOONA 4 TOONAKIT 4 WINGOKIT 0 WINGOKIT 404 WINGOKIT 4 WINGOKIT 04 OLTRE 4 SURFACE MOUNTED, WITH ARTICULATED ARM WALKYKIT 04 0 WALKYKIT 04 HOPP
More informationSHUTTER D GARAGE & ROLLER SHUTTER
GARAGE & SHUTTER D GARAGE & ROLLER SHUTTER 2 DOORS ROLLER OORS VER is the abbreviation for versatile. It is the optimal solution for most small to medium sized overhead and sectional residential garage
More informationfor up-and-over doors up to 11.5 m2 for up-and-over doors up to 14 m 2 for sectional doors up to 9 m 2 for up-and-over doors up to 10.
SELECTION GUIDE FOR SECTIONAL AND UP AND OVER DOORS, IN KIT for sectional doors up to 10.5 m2 for up-and-over doors up to 11.5 m2 SPY650KCE Irreversible, 24 Vdc, with built-in control unit, transmission
More informationHansa. Sliding Gate. Operators. 10 NiceHansa Catalogue NiceHansa Catalogue
Hansa Sliding Gate Operators 10 NiceHansa Catalogue 011 NiceHansa Catalogue 011 11 Hansa Selection guide Follow the arrow and choose the right product For residential and industrial use, also available
More informationBH30 SERIES Today s digital intelligence moves your gate
BH30 SERIES Today s digital intelligence moves your gate Primo Florian: Founding partner - Engineering and design, Dino Florian: Founding President - Development and design, Renato Florian: Founding partner
More informationCB-9 CONTROL BOARD INSTRUCTION MANUAL
CB-9 CONTROL BOARD INSTRUCTION MANUAL AUGUST 95 The CB-9 control board is designed to automate 1 or 2 A.T.A swing gate or sliding gate drive units. This instruction manual gives detailed instructions on
More informationCONTROL UNIT BIOS2. Manual for installation. Programmable Control board for wings gates.
Programmable Control board for wings gates www.remotecontrolgates.co.uk Manual for installation Compatible from firmware version BIOS2BT02 CONTROL UNIT BIOS2 1. Introduzione The control unit BIOS2 is particularly
More informationSwing Gate Kits AUTOMATIC GATE KITS & ACCESSORIES SECURING GATES SINCE Control Cards. Accessories 2017 / Gate & Door Controls Catalogue
Sliding Gate Kits 3G Gate Opener Swing Gate Kits AUTOMATIC GATE KITS & ACCESSORIES SECURING GATES SINCE 1978 Control Cards Accessories 2017 / 2018 Gate & Door Controls Catalogue Gate and Door Technology
More information2011 Catalogue. edition 01
2011 Catalogue edition 01 2011 Catalogue General contents 3 PRODUCTS INDEX 4 ANAYTICA INDEX Y PRODUCT 5 HOW TO USE THE CATAOGUE 10 FT, 30 YEARS 12 FT, TECHNOOGIES, INSTRUMENTS, PROTOCOS 14 FT CERTIFICATES
More informationOpener with external control unit Opener with integrated control unit (Illustration: Deadman mode)
Informations Door system Opener with external control unit 1 8 2 7 6 5 6 7 4 Opener with integrated control unit (Illustration: Deadman mode) 1 2 4 Opener with external control unit 1 Opener 2 Control
More informationimmagine n codice descrizione prezzo Motors
immagine n codice descrizione prezzo Motors T-ONE - Ø45mm Tubolar motors with electronic limit switch and integrated radio for ROLLING SHUTTERS 1 MTE45102 10 Nm for rolling shutters. 180,00 1 MTE45152
More informationSWINGING GATES Electromechanical automation systems for swinging gates
SWINGING GATES Electromechanical automation systems for swinging gates 2 Residential Residential 3 PHOBOS AC A Complete range of electromechanical pistons for residential use, suitable for swing gate leaves
More informationIstruzioni, instructions. Motoriduttore a braccio snodato per cancelli battenti Gear motor with articulated arm for swing gates ALPHEO
Istruzioni, instructions Motoriduttore a braccio snodato per cancelli battenti Gear motor with articulated arm for swing gates ALPHEO 1 Istruzioni, instructions Attention! This manual is for qualified
More informationTRAFFIC BARRIERS COST EFFECTIVE BARRIER SOLUTIONS
TRAFFIC BARRIERS COST EFFECTIVE BARRIER SOLUTIONS The range extends from 2.75m up to 12m (the biggest in the market) and with opening speed up to 0.9s and are all designed for intensive duty cycle. All
More informationElectrified Products TABLE OF CONTENTS. P Power Supply Power Transfers Pressure Sense Bars Proximity Cards & Keys...
TABLE OF CONTENTS A Adjustable Angle Bracket (2941/2942)... 6 Angle Brackets (2950 Series)... 9 Armature Mounting Plates (2950 Series)...7-8 C Coordinator Mounting Bracket (2950 Series)... 8 Concealed
More informationCATALOGUE. Professional
CATALOGUE Professional CATALOGUE Professional INDEX OUR COMPANY pag. 01 OUR MISSION pag. 02 SAFETY pag. 03 Made in Italy AROUND THE WORLD pag. 04 Swing gates automation pag. 05 Electromechanical linear
More informationElectrified Products TABLE OF CONTENTS. P Power Supply Power Transfers Pressure Sense Bars Proximity Cards & Keys...
TABLE OF CONTENTS A Adjustable Angle Bracket (2941/2942)... 6 Angle Brackets (2950 Series)... 9 Armature Mounting Plates (2950 Series)...7-8 C Coordinator Mounting Bracket (2950 Series)... 8 Concealed
More informationSPINBUS UTILISATION LIMITS DIMENSIONS CODE DESCRIPTION PACK/PALLET SPIN N. COMPLETE WITH GUIDE IN THREE 1 m-sections SPIN40
SPINBUS SOLEMYO OPERA BLUEBUS 24V For sectional doors up to 12.5 m² and up-and-over garage doors up to 11.8 m². Irreversible electromechanical gear motor, for residential use, with belt drive, 24 Vdc motor,
More informationEverything becomes automatically more convenient! Discover the Ditec automation
Everything becomes automatically more convenient! Discover the Ditec automation EN www.ditecentrematic.com A complete range of products for any Ditec automation Automation for sectional overhead doors
More informationLinear Operators. Our Interchangeable Operators Let You Stock Less and Sell More! LSO50 LDO50/33 LDCO800 LCO75
Linear Operators Our Interchangeable Operators Let You Stock Less and Sell More! LSO50 LDO50/33 LDCO800 LCO75 The Professional Installer s 1st Choice! Operators by Linear Proven Performers Commonality
More informationEverything becomes automatically more convenient! Discover the Ditec automation
Everything becomes automatically more convenient! Discover the Ditec automation EN www.entrematic.com A complete range of products for any Ditec automation Automation system for garage doors Automation
More informationMOTORS RESIDENCIAL / INDUSTRIAL
MOTORS RESIDENCIAL / INDUSTRIAL WWW.FLEXIDOOR.PT RECOGNIZED QUALITY Flexidoor sectional doors fulfil all the European standards for safety requirements. All the safety components are an integral part of
More informationSYMBOL LEGEND DANGER WARNING NOTE THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN
SYMBOL LEGEND DANGER THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN WARNING THIS WARNS THAT MATERIALS MAY BE DAMAGED IF APPROPRIATE PRECAUTIONS ARE NOT
More informationInstruction Manual for the. E-SL 450 Series
Instruction Manual for the E-SL 450 Series Estate Slide Summary of Functions The Estate Slide is only to be used for vehicular Slide gates in a Class I setting. Class I: A vehicular gate opener (or system)
More informationGate & Door Controller with LCD and Intelligent Technology
2nd Edition Gate & Door Controller with LCD and Intelligent Technology 24Sv1 and 12Sv1 Motor Controllers Setup and Technical information for single motor controller for gates & doors Includes latest Intelligent
More informationDitec PWR Automation system for swing gates with wings up to 5 metres
SAFE 24 V VIRTUAL ENCODER EASY TO INSTALL COMPLETE RANGE Ditec PWR Automation system for swing gates with wings up to 5 metres EN www.entrematic.com Ditec PWR a complete range Ditec PWR is the new range
More informationTOONA 5 HS. Quick manoeuvres: 90 opening in about 16* seconds.
TOONA HS NEW SOLEMYO OPERA BLUEBUS 4V For hi-speed automation of swing gates with leaves up to m or 400 kg, ideal for residential and industrial applications. 4 Vdc, electromechanical gear motor, surface
More informationOperators. Residential Installation. Our Interchangeable Operators Let You Stock Less and Sell More! LDO50/33 LDCO800 LSO50 LCO75 LDCO850 LDCO852
Operators Our Interchangeable Operators Let You Stock Less and Sell More! Residential Installation LDO50/33 LDCO800 LSO50 LCO75 LDCO850 LDCO852 The Professional Installer s 1st Choice! Proven Performers
More informationSYMBOL LEGEND DANGER WARNING NOTE THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN
SYMBOL LEGEND DANGER THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN WARNING THIS WARNS THAT MATERIALS MAY BE DAMAGED IF APPROPRIATE PRECAUTIONS ARE NOT
More informationGate 1 DG CONTROL UNIT FOR ONE MOTOR DIGITAL PROGRAMMING. Guide to the Product. Gate 2 DG. Control Units. Control Units. Gate 1 DG.
Gate 1 DG for 1 sliding gate, swing gate, barrier, BOLLARDS Gate 2 DG for 2 slinding gates, swing gates, barriers BOLLARDS Guide to the Product pag. 57 pag. 57 Gate 1 DG CONTROL UNIT FOR ONE MOTOR Gate
More informationNICE TOO, STYLISH AND VERSATILE NEW TELESCOPIC GEARMOTOR FOR SWING GATES. THE IDEAL SOLUTION FOR RESIDENTIAL OR PEDESTRIAN GATES.
NICE TOO, STYLISH AND VERSATILE NEW TELESCOPIC GEARMOTOR FOR SWING GATES. THE IDEAL SOLUTION FOR RESIDENTIAL OR PEDESTRIAN GATES. NICE TOO, THE VERSATILE SOLUTION FOR SWING GATE STURDY AND STREAMLINED
More informationSWING GATE OPENER SW300 SERIES
USER'S MANUAL SWING GATE OPENER SW300 SERIES 2.50m max. 250kg max. 2.50m max. 250kg max. Important Safety Advice: 1. Knowledge of the relevant electro-technical regulations is required. 2. Training in
More informationMotorisation for garage doors Dexxo RTS. Motorisation for sliding gates Elixo V 3S RTS Elixo RTS
Motorisation for garage doors Dexxo RTS Motorisation for sliding gates Elixo 500 230 V 3S RTS Elixo 800 1300 2000 RTS Motorisation for swinging gates Ixengo S L RTS Motorisation for road barriers Levixo
More informationDKC400Y AC Sliding Gate Installation Manual. Sliding Gate Opener. Model: DKC400Y. Installation Manual WARNING
Sliding Gate Opener Model: DKC400Y Installation Manual WARNING Read and thoroughly understand all instructions before installing or operating this automatic gate opener. Failure to do so may cause serious
More informationBft, access management products
Bft, access management products The contents of this catalogue (images, technical descriptions, illustrations) are the exclusive property of Bft s.p.a. Reproduction in any form and on any medium is forbidden.
More informationBERNER BERNER. We will supply you with the right opener. Safety and convenience for your entranceway. GA-line. GA-line. B-line TORANTRIEBE
We will supply you with the right opener Berner Torantriebe has been a leading manufacturer of garage door openers for more than 50 years. With its own production facility in Germany, Berner satisfies
More informationTAILOR MADE METAL FABRICATIONS LTD. VEHICLE ACCESS CONTROL BARRIER (VAC B)
TAILOR MADE METAL FABRICATIONS LTD. VEHICLE ACCESS CONTROL BARRIER (VAC B) TECHNICAL MANUAL v1.3 JANUARY 2014 Technical Manual (Updated 6 th January 2014) No Vehicle timer Vehicle delay timer Overrun timer
More informationAccessories 286 SDC SECURITY DOOR CONTROLS
8 Security Door Controls From wireless remote controls to durable door holding & release devices, to REX sensors, timers, ball and magnetic switches, and from concealed contact to universal mounting enclosure
More informationCATALOGUE Professional
CATALOGUE Professional CATALOGUE Professional INDEX SWING GATE AUTOMATION 07 Swing gate linear operator 11 Swing gate with arm-driven operator 19 Underground operator 21 Electromechanical wheel-driven
More informationSlide gate openers MOVEMENT BRINGS MORE
Slide gate openers MOVEMENT BRINGS MORE Our standard. Responsible production. - 2 - Our tradition. Striving for perfection. 30 years of experience made ELKA one of the leading companies in the field of
More informationAvanti Door Automation 8 Page Brochure FINAL 2106 PRINT.pdf 2 28/07/2016 2:19 PM The Quiet Achiever C M Y CM MY CY CMY K
The Quiet Achiever C M Y CM CY K The Avanti Difference Avanti Automation combine the latest in European design and innovation with state of the art manufacturing. The team behind Avanti Automation have
More informationSWING GATE OPENERS 24V DC GEAR MOTOR
SWING GATE OPENERS 24V DC GEAR MOTOR FOR RESIDENTIAL USER MANUAL Flashing Light Push Button Control box Gate 2 Gate 1 Index Warnings 2 5. Technical Characteristics 21 1. Product Description and Applications
More informationVEHICLE AND PEDESTRIAN CONTROL
VEHICLE AND PEDESTRIAN CONTROL Jacksons design and manufacture a wide range of gates in steel, timber or a combination of both to safe guard the continued security of any installation. Regardless of the
More informationDelta Secure Spiroll 40 High Speed Security Door. Product Data Sheet 4 / 7
Product Description Our superbly engineered Delta Secure Spiroll 40 provides high-speed operation with security, using proven reliable technology to achieve long tem solutions for almost any application
More informationPW320/PW330 USER MANUAL SWING GATE OPENERS 24V DC GEAR MOTOR FOR RESIDENTIAL. Flashing Light. Push Button. Control box. Gate 2.
PW320/PW330 USER MANUAL SWING GATE OPENERS 24V DC GEAR MOTOR FOR RESIDENTIAL Flashing Light Push Button Control box Gate 2 Gate 1 Declaration of Conformity Applicant: Powertech Electronics Inc. Manufacturer:
More informationBE20 SERIES Today's digital intelligence moves your gate.
BE20 SERIES Today's digital intelligence moves your gate. Primo Florian: Founding partner - Engineering and design, Dino Florian: Founding President - Development and design, Renato Florian: Founding partner
More informationGiotto ROAD BARRIERS TECHNICAL CHARACTERISTICS
Traffic Barriers ROAD BARRIERS Giotto k A range of semi-intensive barriers suitable for 3m to 6m applications. Available in 24V versions (230V power required), they have a wide range of accessories that
More informationNICE WIDE THE BARRIER GATE OPERATOR SYSTEM EASY TO INSTALL, SAFE TO USE AND SIMPLE TO MANAGE.
NICE WIDE THE BARRIER GATE OPERATOR SYSTEM EASY TO INSTALL, SAFE TO USE AND SIMPLE TO MANAGE. NICE WIDE, SOLID AND ESSENTIAL EASY TO INSTALL Large front door for quick and easy access. The bar can be assembled
More informationSLIDER AUTOMATIC DOOR TECHNICAL DATA THE ENERGY SAVING TECHNOLOGY OF SLIDER ENERGY SAVING
SLIDER AUTOMATIC DOOR COMPLYING WITH EN 1 2 3 4 5 6 7 8 9 THE ENERGY SAVING TECHNOLOGY OF SLIDER SLIDER is the new automatic sliding door by RIB. It allows an installation complying with the new norms
More informationsomfy.com Dexxo Optimo RTS EN Installation manual ES Manual de instalación PT Manual de instalação EL Εγχειρίδιο εγκατάσταση C
somfy.com Dexxo Optimo RTS Installation manual ES Manual de instalación PT Manual de instalação EL Εγχειρίδιο εγκατάσταση 5056739C CONTTS GERAL PRESTATION 2 SAFETY INSTRUCTIONS 2 Caution 2 Safety instructions
More informationCOLD ECH. Componenti automazione Automation components Composants automation Componentes automatización
Componenti automazione Automation components Composants automation Componentes automatización Automation system 148 designed for cold room doors WITH FRAME Down ramp 12 mm. Allow a loweing of 12 mm and
More informationTURBO 30. ELECTROMECHANICAL GEAR MOTOR FOR SLIDING GATES UP TO 300 Kg, 24 Vdc ACCESSORIES GATES
30 ELECTROMECHANICAL GEAR MOTOR FOR SLIDING UP TO 300 Kg, 24 Vdc 240 Conceived to carry intensive use and harsh working conditions. 253 81 170,5 Internal battery back-up as optional. 170,5 138 SC-30CSM
More informationCB CONTROL BOARD INSTRUCTION MANUAL VERSION 1.03 DATE 30/10/2000
CB-9 3.02 CONTROL BOARD INSTRUCTION MANUAL VERSION 1.03 DATE 30/10/2000 FIRMWARE VERSION 1.09 Thank you for choosing the CB-9 control system. We encourage you to read and understand this manual prior to
More informationOPENING THE WORLD SWING SWING GATE OPENER USER MANUAL
WWW.TRADINGATE.NET OPENING THE WORLD SWING SWING GATE OPENER USER MANUAL 1 2 WE IMPROVE YOUR LIFE SWING SWING GATE OPENER Contents Introduction Step 1 Specification...2 Step 2 Packing List...3 Step 3 Planning
More informationAmico. new. Above ground operator for swing gates of up to 1.8 m per gate leaf. A new concept in safety
Above ground operator for swing gates of up to 1.8 m per gate leaf Gate operators tested in compliance with European Standards on the subject of impact force new Amico A new concept in safety Amico is
More informationVEHICULAR AC & DC. Residential Apartment/College Residence Halls Gated Communities Mixed Use Buildings Commercial/Industrial Parking Self Storage
VEHICULAR AC & DC SWING GATE OPERATORS Residential Apartment/College Residence Halls Gated Communities Mixed Use Buildings Commercial/Industrial Parking Self Storage AC & DC POWERED Gate OPERATORS Safety
More informationA B O U T FA A C C A N A D A
CANADA ABOUT FAAC CANADA FAAC Canada is the exclusive distributor of FAAC products for the Canadian market. For more than 20 years FAAC has been supplying Canada with a variety of products: gate operators,
More informationExcellence is the constant striving towards perfection.
Made in Italy Excellence is the constant striving towards perfection. MOVING LIFE A company constantly on the move, celebrating 30 years of history and always looking forward to the future: for two generations,
More informationELECTRONIC CONTROL PANEL FOR ONE 230VAC MOTOR TECHNICAL INSTALLATION MANUAL FOR AUTOMATIC GATES
ELECTRONIC CONTROL PANEL FOR ONE 230VAC MOTOR UNIK1E230 (COMPLETE) UNIK1E230SK (WITHOUT BOX AND TRANSFORMER) BOX IP 54 TECHNICAL INSTALLATION MANUAL FOR AUTOMATIC GATES WARNING! Before installing, thoroughly
More informationRSX EGRESS STANDARD DUTY COMMERCIAL OPERATOR ADVANCED INNOVATION. SUPERIOR FUNCTIONALITY. INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS
RSX EGRESS STANDARD DUTY COMMERCIAL OPERATOR ADVANCED INNOVATION. SUPERIOR FUNCTIONALITY. INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS RSX EGRESS Standard features at a glance Easy limit setting
More informationkinggates collection
kinggates collection En kinggates is a dynamic company that keeps up with ever-changing market demands. Supported by a network of partners in over 45 different countries, KINGgates is able to fully satisfy
More informationPW150/PW200 USER MANUAL SWING GATE OPENERS 24V DC GEAR MOTOR
PW150/PW200 USER MANUAL SWING GATE OPENERS 24V DC GEAR MOTOR FOR RESIDENTIAL Flashing Light Push Button Control box Declaration of Conformity Applicant: Powertech Electronics Inc. Manufacturer: Timotion
More informationSAFETY
24 SAFETY SECURITY ELECTROMAGNETS IDEAL FOR EMERGENCY EXITS AND CONDOMINIUM ENTRY DOORS SILENT AND RESISTANT HOLDING FORCE FROM 150 TO 1500 KG CAN BE APPLIED ON PRE-EXISTING DOORS 25 26 SAFETY www.opera-italy.com
More informationLippert Components, Inc. Informational Publication ENTRY DOOR LATCH INFORMATION - SOUTHCO
Lippert Components, Inc. Informational Publication LIP Sheet - 0182 revd ENTRY DOOR LATCH INFORMATION - SOUTHCO SOUTHCO, Inc. door latches are used in Lippert s Keyless Entry Door systems. All Southco
More informationVIS IRREVERSIBLE ELECTROMECHANICAL MOTOR FOR SECTIONAL DOORS. Rev /2011 RT
VIS GB IRREVERSIBLE ELECTROMECHANICAL MOTOR FOR SECTIONAL DOORS. Rev. 01-07/2011 RT TECHNICAL DATA LIFE home integration reserves the right to change the specifications at any time without notice, maintaining
More informationTECHNICAL DATA HYDRAULIC UNIT
GB INSTRUCTIONS MANUAL RISING BOLLARD OIL-HYDRAULIC AUTOMATION COMPONENTS strabuc 918 RELEASE KEY PLUG FOR RELEASE HOLE BOLLARD COVER 12 V WARNING LIGHTS REFLECTORS COMPLETELY RETRACTABLE POST WITH ELECTROPHORESIS
More informationCertification and Product Usage Inside Back Cover ACCESS SYSTEMS
TABLE OF CONTENTS ontents RESIDENTIAL LINEAR ACTUATOR POST MOUNT OPERATORS PRO-SW2000XL Swing Gate Operator 2 PRO-SW4000XL Swing Gate Operator 3 RESIDENTIAL POST OR PAD MOUNT CHAIN DRIVE SLIDE GATE OPERATOR
More information1 ABOUT THE COMPANY. DoorHan Company Group. kadan. suzhou
Table of contents 1 2 3 4 5 6 7 8 About the company 3 Automatic systems for sectional doors 7 Automatic systems for residential sectional doors 8 Automatic systems for residential and industrial sectional
More information