THOR Mod Kit Update May Human Injury and Applied Biomechanics Research Divisions
|
|
- August Carson
- 6 years ago
- Views:
Transcription
1 THOR Mod Kit Update May 2010 Human Injury and Applied Biomechanics Research Divisions
2 THOR Short Term Modifications List of Changes Generated from SAE THOR Task Group Mod Kit updates for head/neck, thorax, knee/femur/pelvis Contracts awarded in September 2009 Contracts to complete in May 2010 Abdomen refinement ongoing under different contract Lx : NHTSA testing 3 new sets of legs One NHTSA THOR-NT will have all upgrades and be ready for initial testing by June THOR drawings, THORTEST and BOM will be modified to reflect changes 2
3 3 Head/Neck Task Review Task List 1. Investigate need for center cable 2. Revise Occipital Condyle bolt design 3. Replace neck cable guides 4. Add landmarks to skin 5. Replace head tilt sensor 6. Investigate seven accelerometer array mount vibration issues 7. Check mass properties of head
4 Head/Neck Redesign Task 1 Examine possibility of removing center cable in neck Center neck cable cannot be removed. However, a compliant neoprene spacer has been inserted in place of the Delrin spacer. This has resulted in the neck static response being closer to the Duke university requirements. Also, neck has proved to be repeatable and durable. 4
5 Neck Extension Testing 5
6 Neck Tension Tests Quasi-static Quasi-static tension response of neck neck column pulled with external 1/8 cable attached to pneumatic test machine tested cable with nylon, Neoprene spacer, and without cable peak force ~ 1100N 6
7 Neck Tension Tests Quasi-static Linearized compliances compared (mm/n) standard cable: 9.7 x 10-4 no cable: 3.3 x 10-3 Neoprene: 2.7 x 10-3 std cable => 3.4 X no cable std cable => 2.8 X Neoprene Neoprene spacer 20% stiffer than no cable Duke results (different fixture): standard cable: 6.6 x 10-4 no cable: 2.5 x 10-4 std cable => 3.7 X no cable 7
8 Neck Tension Tests Quasi-static 8
9 Head/Neck Redesign Task 2 Simplify Design of OC Bolt OC bolt is similar to H-3 bolt. All washers and nut have been removed. More robust potentiometer attachment designed. Design modification did not change A-O joint static requirements. 9
10 Task 2: Redesign of O.C Bolt 10
11 Task 2: Quasi-static AO joint test 11
12 Head/Neck Redesign Task 3 Tilt sensor replacement Current design allows use of 2 biaxial tilt sensors. MSC 260D/GP IES 1402 dual axis tilt sensor 12
13 Head/neck Redesign Task 4 Noise issues in the head assembly Source of the noise was traced to the ballast. Ballast redesigned and is currently attached to the head casting by 4 bolts instead of 2 in the original design. Design allows more contact area between the head casting and ballast. Testing is in process. 13
14 Head/Neck Redesign Task 5 Improve spring cable adjustment and cable guides 2 halves of cable guide replaced with 1 piece guide. The design has been tested and has proved to be workable and easy to insert. Cable adjustment redesign in progress. 14
15 Redesign Cable Guides Split cylinder design with top lip Samples made of Delrin and Teflon Delrin appears to be robust and secure in initial check Teflon proved to be too compliant and easily removable 5/10/2010 GESAC, Inc 15
16 Head/Neck Redesign Task 6 Measure mass properties of the head Head mass and CG are within requirements. MoI is very close to specifications and some mass may have to be taken off to get MoI in corridor. 16
17 Head/Neck Redesign Task 7 Place landmarks on head skin Nasion, infra-orbital foramen, external auditory meatus, OC location and CG location landmarks have been integrated into the head skin. 17
18 Head Skin/Skull Model NT skull and skin converted to 3D controlled skin thicknessuniform over frontal and parietal sections any existing asymmetries removed maintain existing inertial properties engagement between skull and skin at multiple locations 18
19 New Head Skin and Cap Nasion C.G EAM IOF 19
20 New Parts - 1 Head casting and head cap Head skin and cap skin Head ballast Skull accelerometer mount O-C bolt assembly and potentiometer 20
21 New Parts - 2 Head accelerometer mount plate New tilt sensor 7 accelerometer array Neck cable guides Neck center cable spacer 21
22 Thorax Task Review Task List 1. Create clavicle load cell 2. Revise T1 accelerometer mount 3. Replacement of tilt sensor 4. Replace Crux Units with IR-TRACC instrumentation 5. Thorax performance Biofidelity test at 4.3 m/s Durability test at 6.7 m/s 6. Documentation updates 22
23 Clavicle Loadcell Two load cells (left and right) Load Cell Specifications Fx: 450 lbf Fz: 450 lbf Weight:.44 lbs Comply with SAE J211 and J2570 Structural replacement is equivalent to the load cell 23
24 T1 Accelerometer Mount Original design T1 accelerometer mount is far below the anatomic T1 location New design T1 accelerometer mount is close to anatomic T1 location Original design located under shoulder joint New Design 24
25 Replace Tilt Sensor Tilt sensor mount accommodate both IES and MSC tilt sensor. Top View ISO View 25
26 IR-TRACC Instrumentation All four IR-TRACCs are identical design. Two potentiometers are coupled with each IR-TRACC to measure the rotation along Y and Z rotations. Lower two IR-TRACCs have longer mounting extension to provide the same amount of range of motion as the upper two. Upper IR-TRACC and Pots Lower IR-TRACC and Pots 26
27 Pot Zeroing Fixture Potentiometer zeroing fixture compatible L/R, Upper/Lower IR-TRACC mounts Upper IR-TRACC Assembly Lower IR-TRACC Assembly 27
28 Upper IR-TRACCs IRTRACC can move 24º inboard without contact. Mounting point at sternum can move over 60 mm inboard along Y axis. NHTSA test data showed 58 mm lateral deflection maximum under a pure lateral loading condition. Position w/o Deformation 24º contact location 28
29 25 mm standoff used Lower IR-TRACCs Allows 60 mm inward lateral movement Position w/o Deformation Position at Contact 29
30 Comparison of Thorax Test with CRUX and 4.3 m/s Force (N) Calibration Corridor Left IR-TRACC Right IR-TRACC Left IR-TRACC Right IR-TRACC CRUX-1 CRUX-2 Spec Displacement (mm) 30
31 Durability Tests Five Tests were conducted at 6.7 m/s Tests were very repeatable No damage was observed after each tests Data was overlaid in the next few slides 31
32 Summary Double-Gibaled IRTRACC provides equivalent measurements to the CRUX. Weight and Center of Gravity of the thorax remains unchanged. Dummy performance remains unchanged. The design is robust and durable under 6.7 m/s impact test condition. Deliverables Dummy Parts installed on the dummy 3D CAD model and 2D drawing package Updated User s Manual Convert Kit Manual 32
33 Knee/Femur/Pelvis Task List Task 1: New 2-axis(Fx & My) ASIS load cell Task 2: Pelvis Flesh Revisions and Updates and retain mass properties Task 3: Revise Femur Puck and Knee Slider Stiffness Task 4: CAD Drawings and Final Report Task 5: Provide Hardware Kit for THOR 33
34 Developed Smallest Iliac Wing Load cell to date + The load cell measures the contact force (FX) of the belt against the iliac as well as the bending moment about the center of the load cell. The bending moment is an indicator of the belt position on the iliac. A positive moment indicates a belt position above center of the iliac and a negative moment indicates a belt position below the center of the iliac J ASIS Load Cell AXIS FX MY Capacity (Metric) 13 kn 325 Nm The FX force capacity was chosen to be 13 kn. This capacity is the same as for seat belt load cells typically used with Hybrid III 50th ATDs. The moment capacity was chosen based on the geometry of the iliac. The maximum moment that can be applied by the belt is the force x distance from the iliac center to the end of the bone. A distance of.025 M (25 mm) x 13 kn force capacity equals the moment capacity of 325 NM. 34
35 Modified Iliac Wings to fit Load Cell 35
36 Iliac Wing Load Cell Final Assembly 36
37 Revised Pelvic Flesh vs Original 37
38 THOR Femur Revisions 38
39 Target Femur Force-Deflection Response Force (kn) 16X stiffer 3X stiffer 0.5 kn/mm Hybrid III knee/femur THOR-NT knee/femur Upper bound TARGET Cadaver response corridor 3X 2X F 0.75 kn/mm Deflection (mm) From Rupp et al. (2003)
40 Revised Design Square Bearing 50mm Rubber Element Square Shaft WorldSID load cell 40
41 Femur Test Set Up 41
42 Final Results Force vs Displacement 60 Shore A Natural Rubber Femur Puck Compensated Force (N) Upper Corridor Lower Corridor Test 1 Test 2 Test 3 Test 4 Test 5 Test 6 Test Displacement (mm) 42
43 Part Kits to update a current NT Pelvis flesh Pelvic Base Module (Illac wing mounting) Accelerometer/tilt sensor block R & L Illac Wings w/structural replacements L & R Upper leg flesh L & R Upper Leg Assemblies L & R Knee Flesh L & R Knee assemblies L & R Knee Slider Assemblies 44
44 Summary: THOR Mod Kit Status Mod Kit Project Completed all deliverables from Short Term Task list Improved biofidelity, durability and usability Next Steps NHTSA to evaluate modified dummy (June-Sept. 2010) Component, sled, vehicle (possibly) tests Communicate results to SAE THOR Task Group Develop plans to modify additional dummies Develop test plan for R&R Develop THOR FE model to match modifications Need to determine model maintenance process 45
Humanetics is now shipping all ATDs for use in the U.S. NCAP at SBL-A and also offers upgrade kits for previously delivered dummies.
THOR-50M U.S. NCAP SBL-A Update Publication Date: January 07 Humanetics now offers the THOR-50M Standard Build Level A (SBL-A) which is intended to meet the drawings and qualification specifications defined
More informationService Bulletin A
THOR-50M Euro NCAP SBL-A Update Publication Date: January 207 Humanetics now offers the THOR-50M Standard Build Level A (SBL-A) which is intended to meet the drawings and qualification specifications defined
More informationHumanetics Innovative Solutions, Inc. THOR-M Advanced Male Dummy Parts Catalog
THOR-M Advanced Male Dummy 472-0000 Parts Catalog For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact: Humanetics Innovative Solutions 47460 Galleon Drive
More informationTHOR Specification and Certification Version 1.0 November 2018 TB 026
Technical Bulletin THOR Specification and Certification Version 1.0 November 2018 TB 026 Title THOR Specification and Certification Version 1.0 Document Number TB 026 Author B Been & J Ellway Date November
More informationWorldSID 50th Dummy Parts Catalogue
WorldSID th Dummy Parts Catalogue WorldSID th Head Assembly e t y r W- Head Assembly, Tested & Certified W- Head core W- Moulded head ISO-:,... Rotational accelerometer, Endevco BM a ISO-:,... Dual-axis
More informationRear Impact Dummies. Z. Jerry Wang, PhD, Chief Engineer Eric Jacuzzi, Project Engineer
Rear Impact Dummies Z. Jerry Wang, PhD, Chief Engineer Eric Jacuzzi, Project Engineer GRSP International Informal Technical Group Meeting Washington DC November 6, 29 First Technology Safety Systems, Inc.
More informationRoad vehicles Design and performance specifications for the WorldSID 50th percentile male side impact dummy Part 2: Mechanical subsystems
ISO 2011 All rights reserved ISO TC 22/SC 12 N Date: 2011-02-10 ISO TC 22/SC 12/WG 5 Secretariat: AFNOR Road vehicles Design and performance specifications for the WorldSID 50th percentile male side impact
More informationHybrid III 95th Large Male Full Assembly
Full Assembly Neck Assembly 880995-1250 Head Assembly 880995-1100 Upper Torso Assembly 880995-1300 Arm Assembly 880995-730 Left 880995-731 Right Lower Torso Assembly 880995-1450 Leg Assembly 880995-1513
More informationQ10 (10.5 year old child) User Manual
Q10 (10.5 year old child) User Manual 010-9900 User Manual Q10 Revision G Page 1 of 123 For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact: Humanetics
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13232-3 Second edition 2005-12-15 Motorcycles Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles Part 3: Motorcyclist
More informationCRABI 12-Month Old Infant Dummy
Section 1-1 Page 1 CRABI 12 Month Old Infant Dummy 921022-000 NHTSA 49 CFR, Part 572, Subpart R FMVSS-208 Frontal Occupant Protection FMVSS-213 Child Restraint Systems The CRABI 12 Month Old was developed
More informationSURFACE VEHICLE RECOMMENDED PRACTICE
SURFACE VEHICLE RECOMMENDED PRACTICE J2860 SEP2012 Issued 2012-09 Superseding EA-26 OCT2003 User's Manual for the Hybrid III Large Male Test Dummy SAE Technical Standards Board Rules provide that: This
More informationHumanetics Innovative Solutions, Inc. Hybrid-III 95th Large Male Dummy H. Brand Harmonized Parts Catalog
Hybrid-III 95th Large Male Dummy 880995-0000-H Brand Harmonized Parts Catalog For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact: Humanetics Innovative
More informationWorldSID 50 th Update
Informal Document No. GRSP-44-33 (44th session, 10-12 December 2008, agenda item 5(a)) PDB - Partnership for Dummy Technology and Biomechanics on behalf of the WorldSID Task Group 44 th GRSP Session Geneva,
More informationTHUMS User Community
THUMS User Community Therese Fuchs, Biomechanics Group, Institute of Legal Medicine, University of Munich therese.fuchs@med.uni-muenchen.de, tel. +49 89 2180 73365 Munich, 9th of April 2014 Agenda 1. What
More informationFrontalaufprall im Verbraucherschutz Frontal Impact In Consumer Test Programms
Frontalaufprall im Verbraucherschutz Frontal mpact n Consumer Test Programms Volker Sandner, ADAC e.v., Landsberg am Lech Foto: ADAC / Ralph Wagner 2 2018 MESSRNG GmbH Flashback 3 2018 MESSRNG GmbH First
More informationJAMA/JARI Evaluation Tests of
JAMA/JARI Evaluation Tests of The WorldSID 5th Dummy JAMA JARI MLIT NTSEL etc WorldSID Project Organization IHRA Worldwide governments coordination ISO TC22/SC12/WG5 Anthropomorphic Test Devices WorldSID
More informationDevelopment of Advanced HIII Abaqus dummies
Visit the SIMULIA Resource Center for more customer examples. Development of Advanced HIII Abaqus dummies W. Li, J. Rasico, F. Zhu, M. Li, R. Kant, B. Aljundi First Technology Safety System Inc. Abstract:
More informationAustralian Pole Side Impact Research 2010
Australian Pole Side Impact Research 2010 A summary of recent oblique, perpendicular and offset perpendicular pole side impact research with WorldSID 50 th Thomas Belcher (presenter) MarkTerrell 1 st Meeting
More informationTransport Research Laboratory Creating the future of transport
Transport Research Laboratory Creating the future of transport CLIENT PROJECT REPORT CPR1317 Global Impact Dummies - Assessment Concerning WorldSID in Future Regulatory Applications Final Report J A Carroll,
More informationSTUDY ON CAR-TO-CAR FRONTAL OFFSET IMPACT WITH VEHICLE COMPATIBILITY
STUDY ON CAR-TO-CAR FRONTAL OFFSET IMPACT WITH VEHICLE COMPATIBILITY Chang Min, Lee Jang Ho, Shin Hyun Woo, Kim Kun Ho, Park Young Joon, Park Hyundai Motor Company Republic of Korea Paper Number 17-0168
More informationBrand Harmonized Parts Catalog. Humanetics Innovative Solutions, Inc. BioRID II Rear Impact Male Dummy ARA-001-H
Brand Harmonized Parts Catalog Humanetics Innovative Solutions, Inc. BioRID II Rear Impact Male Dummy ARA-001-H For information on Humanetics products, please visit our web site at www.humaneticsatd.com
More informationHumanetics Innovative Solutions, Inc. EuroSID-2re Male Side Impact Dummy H. Brand Harmonized Parts Catalog
EuroSID-2re Male Side Impact Dummy 175-0000-H Brand Harmonized Parts Catalog For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact: Humanetics Innovative
More informationSide Impact and Ease of Use Comparison between ISOFIX and LATCH. CLEPA Presentation to GRSP, Informal Document GRSP Geneva, May 2004
Side Impact and Ease of Use Comparison between ISOFIX and LATCH CLEPA Presentation to GRSP, Informal Document GRSP- 35-1 9 Geneva, May 2004 1 Objective of test programme To objectively assess the comparison
More informationJRS Dynamic Rollover Test Scion xb
Page 1 of 57 JRS Dynamic Rollover Test 2008 Scion xb Sponsored By: Automotive Safety Research Institute Charlottesville, VA. Introduction Page 2 of 57 Center for Injury Research conducted a JRS dynamic
More informationProblem Traditional ejection test manikins have limited head sensors Upper neck forces/moments Triaxial accelerometer Possibly angular (pitch) acceler
Development of an Instrumentation Suite to Measure Helmet Windblast and Impact Loading 23 June 24 John Plaga Human Effectiveness Directorate Air Force Research Laboratory Doug Coppess Glenn Thomas Greg
More informationDrawing package of ES-2 dummy as specified in UNECE Regulation 95
Drawing package of ES-2 dummy as specified in UNECE Regulation 95 26 th June 2009 prepared by FTSS for UNECE, Geneva Notice on the contents: The ES-2 dummy drawing list has been submitted to UNECE in Geneva
More informationVirtual human body model for fast safety assessment
Virtual human body model for fast safety assessment Luděk Hynčík et al. Luděk Kovář el al. University of West Bohemia MECAS ESI s.r.o. Plzeň (Pilsen), Czech Republic AUTOSYMPO 2017 31 October 2 November
More informationInjury Risk and Seating Position for Fifth-Percentile Female Drivers Crash Tests with 1990 and 1992 Lincoln Town Cars. Michael R. Powell David S.
Injury Risk and Seating Position for Fifth-Percentile Female Drivers Crash Tests with 1990 and 1992 Lincoln Town Cars Michael R. Powell David S. Zuby July 1997 ABSTRACT A series of 35 mi/h barrier crash
More informationJRS Dynamic Rollover Test Toyota Camry
Page 1 of 60 JRS Dynamic Rollover Test 2007 Toyota Camry Hybrid Version Sponsored By: Automotive Safety Research Institute Charlottesville, VA. Introduction Page 2 of 60 Center for Injury Research conducted
More informationJoint Australian and Canadian Pole Side Impact Research
Joint Australian and Canadian Pole Side Impact Research Thomas Belcher Australian Government Department of Infrastructure and Transport Suzanne Tylko Transport Canada 7 th Meeting - GRSP Informal Group
More informationTEST METHOD Booster Seats. May 2012R January 1, Revised: Issued: (Ce document est aussi disponible en français)
TEST METHOD 213.2 Booster Seats Revised: Issued: May 2012R January 1, 2010 (Ce document est aussi disponible en français) Table of Contents 1. Introduction... 1 2. Test Devices to be Used... 1 3. Dynamic
More informationPre impact Braking Influence on the Standard Seat belted and Motorized Seat belted Occupants in Frontal Collisions based on Anthropometric Test Dummy
Pre impact Influence on the Standard Seat belted and Motorized Seat belted Occupants in Frontal Collisions based on Anthropometric Test Dummy Susumu Ejima 1, Daisuke Ito 1, Jacobo Antona 1, Yoshihiro Sukegawa
More informationEEVC WG12 Rear Impact Biofidelity Evaluation Programme
EEVC WG12 Rear Impact Biofidelity Evaluation Programme Presented by David Hynd Chairman, EEVC WG20 Slide 1 Introduction EEVC WG20 formed in 2003 to develop test procedures for rear impacts Prime focus
More informationSurviving a Crash in Rear Seats: Addressing the Needs from a Diverse Population
Surviving a Crash in Rear Seats: Addressing the Needs from a Diverse Population Jingwen Hu, PhD UMTRI-Biosciences MADYMO USER MEETING 2016 Research Themes Safety Design Optimization Laboratory Testing
More informationTechnical Product Sheet
18 kg Ejection Mitigation Featureless Headform P/N ATD-7304 Technical Product Sheet On December 2, 2009 NHTSA submitted a Notice of Proposed Rulemaking (NPRM) on Ejection Mitigation (docket NHTSA-2009-0183).
More informationJRS Dynamic Rollover Test Toyota Prius
Page 1 of 62 JRS Dynamic Rollover Test 2010 Toyota Prius Sponsored By: Automotive Safety Research Institute Charlottesville, VA. Vehicle Donated by: State Farm Insurance Company Chicago, IL. Introduction
More informationLAB PMHS Data : test matrix overview
LAB PMHS Data : test matrix overview LAB PMHS Data : test matrix overview Serie Type Config. Distance Reference LAB_ SLED kn AB SL_1 LAB_ SLED kn AB SL_ LAB_ SLED 6kN SL6_1 LAB_ SLED 6kN SL6_ membrane
More informationranking of either the THOR Mod Kit or the THOR Metric ATDs. This study is limited by the volume, quality, and specificity of the PMHS data.
THORACIC BIOFIDELITY ASSESSMENT OF THE THOR MOD KIT ATD Daniel P. Parent Matthew Craig Stephen A. Ridella Joseph D. McFadden National Highway Traffic Safety Administration United States of America Paper
More informationWHEELCHAIR TRANSPORTATION STANDARDS W/c Tiedown and Occupant Restraint Systems-WTORS
WHEELCHAIR TRANSPORTATION STANDARDS W/c Tiedown and Occupant Restraint Systems-WTORS Douglas Hobson, Ph.D. RERC on Wheeled Mobility Department of Rehabilitation Science and Technology University of Pittsburgh
More informationHumanetics Innovative Solutions, Inc. EuroSID-2 Male Side Impact Dummy E2.AI-H. Brand Harmonized Parts Catalog
EuroSID-2 Male Side Impact Dummy E2.AI-H Brand Harmonized Parts Catalog For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact: Humanetics Innovative Solutions
More informationOverview of LSTC s LS-DYNA Anthropomorphic Models
Overview of LSTC s LS-DYNA Anthropomorphic Models Christoph Maurath, Sarba Guha, Dilip Bhalsod, Mike Burger, Jacob Krebs, Suri Bala Livermore Software Technology Corporation Sebastian Stahlschmidt, Reuben
More informationThis paper details the development of the latest potential updates to the FMVSS No. 213 seat assembly 4 including the assembly s geometry,
DEVELOPMENT OF A REPRESENTATIVE SEAT ASSEMBLY FOR NO. 23 Kedryn Wietholter Cristina Echemendia Allison E. Louden National Highway Traffic Safety Administration United States of America 7-043 ABSTRACT Federal
More informationFull Width Test ECE-R 94 Evaluation of test data Proposal for injury criteria Way forward
Full Width Test ECE-R 94 Evaluation of test data Proposal for injury criteria Way forward Andre Eggers IWG Frontal Impact 19 th September, Bergisch Gladbach Federal Highway Research Institute BASt Project
More information54 rd Meeting Informal Group on Child Restraint Systems Booster Seat Width Development. 27 th October2015
54 rd Meeting Informal Group on Child Restraint Systems Booster Seat Width Development 27 th October2015 1 KEY CHANGE IN INFORMAL GROUP DIRECTION AT ITS 50TH MEETING GERMANY Introduce only non-integral
More informationEvaluation of Advance Compatibility Frontal Structures Using the Progressive Deformable Barrier
Informal document No. GRSP-45-16 (45th GRSP, 25-29 May 2009 agenda item 6(a)) Evaluation of Advance Compatibility Frontal Structures Using the Progressive Deformable Barrier 45th GRSP May 2009 Susan MEYERSON,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 AUTOLIV ASP, INC. Autoliv North America 1320 Pacific Dr. Auburn Hills, MI 48326 Warren Short 248 276 3840 warren.short@autoliv.com MECHANICAL Valid To: April
More informationEUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) ASSESSMENT PROTOCOL ADULT OCCUPANT PROTECTION
EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) ASSESSMENT PROTOCOL ADULT OCCUPANT PROTECTION EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) ASSESSMENT PROTOCOL ADULT OCCUPANT PROTECTION Table of
More informationJRS Dynamic Rollover Test Chevrolet Malibu
Page 1 of 61 JRS Dynamic Rollover Test 2009 Chevrolet Malibu Sponsored By: Automotive Safety Research Institute Charlottesville, VA. Vehicle Donated by: State Farm Insurance Company Chicago, IL. Introduction
More informationEvaluation of Seat Performance Criteria for Rear-end Impact Testing
Evaluation of Seat Performance Criteria for Rear-end Impact Testing Johan Davidsson Chalmers University of Technology Anders Kullgren Folksam Research 2 What is needed in a GTR? Crash test dummy with acceptable:
More informationEUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP)
EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) ASSESSMENT PROTOCOL ADULT OCCUPANT PROTECTION Implementation 1 st January 2020 Copyright 2018 Euro NCAP - This work is the intellectual property of Euro
More informationSAFETY ENHANCED INNOVATIONS FOR OLDER ROAD USERS. EUROPEAN COMMISSION EIGHTH FRAMEWORK PROGRAMME HORIZON 2020 GA No
SAFETY ENHANCED INNOVATIONS FOR OLDER ROAD USERS EUROPEAN COMMISSION EIGHTH FRAMEWORK PROGRAMME HORIZON 2020 GA No. 636136 Deliverable No. Deliverable Title Dissemination level D3.3b Updated Pedestrian
More informationUpdate on Pedestrian Leg Testing
GTR9-1-12 Informal document GRSP-49-23 (49th GRSP, 16-20 May 2011, agenda items 4(a)) Update on Pedestrian Leg Testing National Highway Traffic Safety Administration 49 th GRSP Session May 2011 Nha Nguyen
More informationWheelchair Transportation Principles I: Biomechanics of Injury
Wheelchair Transportation Principles I: Biomechanics of Injury Gina Bertocci, Ph.D. & Douglas Hobson, Ph.D. Department of Rehabilitation Science and Technology University of Pittsburgh This presentation
More informationSLED TEST PROCEDURE FOR ASSESSING KNEE IMPACT AREAS
EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) SLED TEST PROCEDURE FOR ASSESSING KNEE IMPACT AREAS CONTENTS 1 INTRODUCTION...2 2 PREREQUISITES FOR KNEE MAPPING...3 3 HARDWARE SETUP...4 4 VALIDATION
More informationABSTRACT INTRODUCTION
SIMULATION OF TRUCK REAR UNDERRUN BARRIER IMPACT Roger Zou*, George Rechnitzer** and Raphael Grzebieta* * Department of Civil Engineering, Monash University, ** Accident Research Centre, Monash University,
More informationSAFETY ENHANCED INNOVATIONS FOR OLDER ROAD USERS. EUROPEAN COMMISSION EIGHTH FRAMEWORK PROGRAMME HORIZON 2020 GA No
SAFETY ENHANCED INNOVATIONS FOR OLDER ROAD USERS EUROPEAN COMMISSION EIGHTH FRAMEWORK PROGRAMME HORIZON 2020 GA No. 636136 Deliverable No. Deliverable Title Dissemination level D3.2a Elderly Overweight
More informationFlex GT Testing of US Vehicles
Flex GT Testing of US Vehicles NHTSA s Vehicle Research and Test Center (VRTC) Ann Mallory, Transportation Research Center, Inc Jason Stammen, National Highway Traffic Safety Administration Flex TEG Meeting
More informationSTANDARD PNEUMATIC RAM TEST METHOD AND EQUIPMENT USED IN EVALUATING THE PERFORMANCE CHARACTERISTICS OF PROTECTIVE HEADGEAR AND FACE GUARDS
STANDARD PNEUMATIC RAM TEST METHOD AND EQUIPMENT USED IN EVALUATING THE PERFORMANCE CHARACTERISTICS OF PROTECTIVE HEADGEAR AND FACE GUARDS NOCSAE DOC (ND) 081-18am18 Prepared By NATIONAL OPERATING COMMITTEE
More informationEUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP)
EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) TESTING PROTOCOL CHILD OCCUPANT PROTECTION Implementation 1 st January 2018 Version 7.2 Copyright Euro NCAP 2017 - This work is the intellectual property
More informationMethodologies and Examples for Efficient Short and Long Duration Integrated Occupant-Vehicle Crash Simulation
13 th International LS-DYNA Users Conference Session: Automotive Methodologies and Examples for Efficient Short and Long Duration Integrated Occupant-Vehicle Crash Simulation R. Reichert, C.-D. Kan, D.
More informationFlexPLI Round Robin Testing
FlexPLI Round Robin Testing Brian Suntay Transportation Research Center Inc. Jason Stammen NHTSA Vehicle Research and Test Center Objectives & Overview Evaluate repeatability & reproducibility Vehicle
More informationREPORT NUMBER: 214P-MGA SAFETY COMPLIANCE TESTING FOR FMVSS 214 DYNAMIC SIDE IMPACT PROTECTION RIGID POLE
REPORT NUMBER: 214P-MGA-21-3 SAFETY COMPLIANCE TESTING FOR FMVSS 214 DYNAMIC SIDE IMPACT PROTECTION RIGID POLE FORD MOTOR COMPANY 21 FORD F-15 4x2 REGULAR CAB NHTSA NUMBER: CA28 PREPARED BY: MGA RESEARCH
More informationOccupant Restraint Systems in Frontal Impact
TEST METHOD 208 Occupant Restraint Systems in Frontal Impact Revised: Issued: December 1996R January 20, 1976 (Ce document est aussi disponible en français) Table of Contents 1. Introduction... 1 2. General
More informationUsing the Abaqus BioRID-II Dummy to support the development of a Front Seat Structure during rear low speed crashes - Whiplash
Using the Abaqus BioRID-II Dummy to support the development of a Front Seat Structure during rear low speed crashes - Whiplash H.Hartmann (1), M. Socko (2) (1) Faurecia Autositze GmbH, (2) Faurecia Fotele
More informationLateral Protection Device
V.5 Informal document GRSG-113-11 (113th GRSG, 10-13 October 2017, agenda item 7.) Lateral Protection Device France Evolution study on Regulation UNECE n 73 1 Structure Accidentology analysis Regulation
More informationEUROPEAN COMMISSION DG RTD
EUROPEAN COMMISSION DG RTD SEVENTH FRAMEWORK PROGRAMME THEME 7 TRANSPORT - SST SST.2007.4.1.2: Human physical and behavioral components GA No. 218516 THORAX Thoracic injury assessment for improved vehicle
More informationINSTALLATION INSTRUCTIONS
Aero Twin, Inc. Single Place Folding Seat P/N DFS1-01W TSO-C127a INSTALLATION INSTRUCTIONS Document No. DFS1W-IM1-T Note: This installation and weight and balance data is identical to that contained within
More informationTHE INFLUENCE OF THE SAFETY BELT ON THE DECISIVE INJURY ASSESSMENT VALUES IN THE NEW US-NCAP
THE INFLUENCE OF THE SAFETY BELT ON THE DECISIVE INJURY ASSESSMENT VALUES IN THE NEW US-NCAP Burkhard Eickhoff*, Harald Zellmer*, Martin Meywerk** *Autoliv B.V. & Co. KG, Elmshorn, Germany **Helmut-Schmidt-Universität,
More informationREDUCING RIB DEFLECTION IN THE IIHS TEST BY PRELOADING THE PELVIS INDEPENDENT OF INTRUSION
REDUCING RIB DEFLECTION IN THE IIHS TEST BY PRELOADING THE PELVIS INDEPENDENT OF INTRUSION Greg Mowry David Shilliday Zodiac Automotive US. Inc. United States Paper Number 5-422 ABSTRACT A cooperative
More informationANCAP Test Protocol. Child Occupant Protection v7.2a
ANCAP Test Protocol. Child Occupant Protection v7.2a JANUARY 2018 PREFACE During the test preparation, vehicle manufacturers are encouraged to liaise with ANCAP and to observe the way cars are set up for
More informationREPORT NUMBER: 214P-MGA SAFETY COMPLIANCE TESTING FOR FMVSS 214 DYNAMIC SIDE IMPACT PROTECTION RIGID POLE
REPORT NUMBER: 214P-MGA-211-11 SAFETY COMPLIANCE TESTING FOR FMVSS 214 DYNAMIC SIDE IMPACT PROTECTION RIGID POLE KIA MOTORS MANUFACTURING GEORGIA, INC. 211 KIA SORENTO SUV NHTSA NUMBER: CB511 PREPARED
More informationUpdate on Pedestrian Leg Testing
Informal documentgrsp-49-23 (49th GRSP, 16-20 May 2011, agenda items 4(a)) Update on Pedestrian Leg Testing National Highway Traffic Safety Administration 49 th GRSP Session May 2011 Nha Nguyen 1 Pedestrian
More informationSeries 249 and 249N Swivels
Series 249 and 249N Swivels l Features Strong, durable, versatile swivels specifically designed for the rigorous demands of closed-loop servohydraulic testing applications Series 249 swivels are available
More informationREPORT NUMBER: 214P-MGA SAFETY COMPLIANCE TESTING FOR FMVSS 214 DYNAMIC SIDE IMPACT PROTECTION RIGID POLE
REPORT NUMBER: 214P-MGA-211-9 SAFETY COMPLIANCE TESTING FOR FMVSS 214 DYNAMIC SIDE IMPACT PROTECTION RIGID POLE TOYOTA MOTOR CORPORATION 211 SCION TC 3-DR LIFTBACK NHTSA NUMBER: CB517 PREPARED BY: MGA
More informationReconstruction of Low-Speed Crashes using the Quasi-Static Force vs. Deformation Characteristics of the Bumpers Involved in the Crashes
2012-01-0598 Published 04/16/2012 Copyright 2012 SAE International doi:10.4271/2012-01-0598 saepcmech.saejournals.org Reconstruction of Low-Speed Crashes using the Quasi-Static Force vs. Deformation Characteristics
More informationANCAP Test Protocol. Child Occupant Protection v7.2.1
ANCAP Test Protocol. Child Occupant Protection v7.2.1 JANUARY 2018 PREFACE During the test preparation, vehicle manufacturers are encouraged to liaise with ANCAP and to observe the way cars are set up
More informationTHE EXPECTED IMPACT OF UN REGULATION NO. 137 TESTS ON EUROPEAN CARS AND SUGGESTED TEST PROTOCOL MODIFICATIONS TO MAXIMISE BENEFITS
THE EXPECTED IMPACT OF UN REGULATION NO. 137 TESTS ON EUROPEAN CARS AND SUGGESTED TEST PROTOCOL MODIFICATIONS TO MAXIMISE BENEFITS Matthias Seidl Mervyn Edwards Adam Barrow David Hynd Transport Research
More informationMroz 1. Krystoffer Mroz Bengt Pipkorn Autoliv Research Sweden. Hyung Joo Kim Hyundai Motor Company South Korea
Investigation of Pelvis Kinematics for Various Lap Belt Positions and an Inflatable Pelvis Restraint Cushion Using a Human Body Model of a Female Occupant Krystoffer Mroz Bengt Pipkorn Autoliv Research
More informationEUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP)
EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) MPDB FRONTAL IMPACT TESTING PROTOCOL Implementation 1 st January 2020 Copyright Euro NCAP 2018 - This work is the intellectual property of Euro NCAP. Permission
More informationNeck Biomechanical Responses with Active Head Restraints: Rear Barrier Tests with BioRID and Sled Tests with Hybrid III
SAE TECHNICAL PAPER SERIES 22-1-3 Neck Biomechanical Responses with Active Head Restraints: Rear Barrier Tests with BioRID and Sled Tests with Hybrid III David C. Viano Saab Automobile AB Vehicle Safety
More informationTechnical Note on the EuroSID-2 with Rib Extensions (ES-2re)
Technical Note on the EuroSID-2 with Rib Extensions (ES-2re) WG12 report October 2006 Technical Note on the EUROSID-2 with Rib Extensions (ES-2re) WG12 Biomechanics March 13 th 2006 SUMMARY The ES-2re
More informationANCAP Assessment Protocol. Adult Occupant Protection v8.0.2
ANCAP Assessment Protocol. Adult Occupant Protection v8.0.2 JANUARY 2018 PREFACE During the test preparation, vehicle manufacturers are encouraged to liaise with ANCAP and to observe the way cars are set
More informationSimposium NasionalTeknologi Terapan (SNTT) EXPERIMENTAL AND NUMERICAL ANALYSIS OF DUMMY NECK FOR CRASHWORTHINESS ASSESSMENT
EXPERIMENTAL AND NUMERICAL ANALYSIS OF DUMMY NECK FOR CRASHWORTHINESS ASSESSMENT Rakhmad A. Siregar 1 andshah F. Khan 2 1 Mechanical Engineering Dept., UniversitasMuhammadiyah Sumatera Utara, Indonesia
More informationADVANCED RESTRAINT SY S STEM (ARS) Y Stephen Summers St NHTSA Ve NHTSA V hi hhicle S Saf t e y t R Resear R h c 1
ADVANCED RESTRAINT SYSTEM (ARS) Stephen Summers NHTSA Vehicle Safety Research 1 CRASH AVOIDANCE METRICS PARTNERSHIP (CAMP) ARS 4 year Cooperative research program Demonstrate restraint systems that can
More informationEvaluation of Adaptive Belt Restraint Systems for the Protection of Elderly Occupants in Frontal Impacts
Evaluation of Adaptive Belt Restraint Systems for the Protection of Elderly Occupants in Frontal Impacts Krystoffer Mroz, Bengt Pipkorn, Cecilia Sunnevång, Andre Eggers, Dan Bråse Abstract The effect of
More informationNew Side Impact Dummy Developments
New Side Impact Dummy Developments Bhavik Shah & Jennifer Tang First Technology Safety Systems Inc. 47460 Galleon Drive Plymouth MI 48170 USA Tel: +1 734 451 7878 Email: bshah@ftss.com & jzhou@ftss.com
More informationMEASUREMENTS OF VEHICLE COMPATIBILITY IN FRONT-TO-SIDE CRASHES K.
MEASUREMENTS OF VEHICLE COMPATIBILITY IN FRONT-TO-SIDE CRASHES K. Digges and A. Eigen The National Crash Analysis Center The George Washington University USA ABSTRACT The National Highway Traffic Safety
More informationEUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) FULL WIDTH FRONTAL IMPACT TESTING PROTOCOL
EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) FULL WIDTH FRONTAL IMPACT TESTING PROTOCOL December 2016 Copyright 2016 Euro NCAP - This work is the intellectual property of Euro NCAP. Permission is
More informationE/ECE/324/Rev.2/Add.128/Rev.1/Amend.2 E/ECE/TRANS/505/Rev.2/Add.128/Rev.1/Amend.2
E/ECE/324/Rev.2/Add.128/Rev.1/Amend.2 26 July 2017 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled
More informationEUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) OFFSET DEFORMABLE BARRIER FRONTAL IMPACT TESTING PROTOCOL
EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) OFFSET DEFORMABLE BARRIER FRONTAL IMPACT TESTING PROTOCOL Copyright 2015 Euro NCAP - This work is the intellectual property of Euro NCAP. Permission is
More informationISO 2953 INTERNATIONAL STANDARD. Mechanical vibration Balancing machines Description and evaluation
INTERNATIONAL STANDARD ISO 2953 Third edition 1999-04-15 Mechanical vibration Balancing machines Description and evaluation Vibrations mécaniques Machines à équilibrer Description et évaluation A Reference
More informationInformal document. Analysis of Coaches Rows Seats Distance Influence on the Passengers Comfort and Safety. ESV 2009.
Transmitted by the expert from Spain Informal document No. GRSG-98-18 (98 th GRSG, 3-7 May 2010 agenda item 3.1) Informal document Analysis of Coaches Rows Seats Distance Influence on the Passengers Comfort
More informationComparison of the THORAX Demonstrator and HIII sensitivity to crash severity and occupant restraint variation
Comparison of the THORAX Demonstrator and HIII sensitivity to crash severity and occupant restraint variation Cecilia Sunnevång, David Hynd, Jolyon Carroll, Mikael Dahlgren Abstract The thorax is the most
More informationHumanetics Innovative Solutions, Inc. Q1.5 Child Dummy (Advanced 1.5 year old child) Parts Catalog
Q1.5 Child Dummy (Advanced 1.5 year old child) 048-0000 Parts Catalog For information on Humanetics products, please visit our web site at www.humaneticsatd.com or contact: Humanetics Innovative Solutions
More informationDevelopment and Component Validation of a Generic Vehicle Front Buck for Pedestrian Impact Evaluation
IRC-14-82 IRCOBI Conference 214 Development and Component Validation of a Generic Vehicle Front Buck for Pedestrian Impact Evaluation Bengt Pipkorn, Christian Forsberg, Yukou Takahashi, Miwako Ikeda, Rikard
More informationVehicle Seat/Head Restraint Evaluation Protocol Dynamic Criteria (Version IV)
Vehicle Seat/Head Restraint Evaluation Protocol Dynamic Criteria (Version IV) February 2016 Vehicle Seat/Head Restraint Evaluation Protocol, Dynamic Criteria (Version IV) 1. Purpose This document describes
More informationTransport Canada. Child Occupant Protection Research. Considerations for Future Regulations. Suzanne Tylko Chief of Crashworthiness Research
CRS-03-13 Transport Canada Child Occupant Protection Research & Considerations for Future Regulations Suzanne Tylko Chief of Crashworthiness Research 3 rd Informal Child Restraint System Meeting May 13,
More informationINVITATION TO TENDER FOR THE SUPPLY OF CHASSIS IN THE 2020, 2021, 2022 AND 2023 FIA WORLD RALLYCROSS CHAMPIONSHIP
INVITATION TO TENDER FOR THE SUPPLY OF CHASSIS IN THE 2020, 2021, 2022 AND 2023 FIA WORLD RALLYCROSS CHAMPIONSHIP QUESTIONS AND ANSWERS Q: If manufacturers provide class A surfaces, then it is assumed
More informationEUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP)
EUROPEAN NEW CAR ASSESSMENT PROGRAMME (Euro NCAP) OFFSET DEFORMABLE BARRIER FRONTAL IMPACT TESTING PROTOCOL Implementation 1 st January 2016 Copyright 2015 Euro NCAP - This work is the intellectual property
More information