Air operated Pinch Valves
|
|
|
- Maryann Reeves
- 6 years ago
- Views:
Transcription
1 Air operated Pinch Valves Connection options: Flange Connection Internal Thread Connection Tri-Clamp Weld-on ends Threaded spigot (RJT Connection) Semi-Silo Trailer Connection Threaded hose nozzles
2 AKO Innovative Pinch Valve Technology The valve solution for abrasive, corrosive and fibrous products like granules, powders and slurries. Advantages: Optimum tightness Free passage Low resistance Easy maintenance Low air consumption Low weight No plugging Valve function: The pinch valve closes by using air / fluid* (min.2bar differential pressure) supplied to the valve body. The specially designed sleeve will then close 100%. Max. operating pressure: 2 to 6 bar (depending on valve diameter). Construction: A wide variety of materials, connection types and sleeve qualities allow for a wide range of applications. Optional accessory control systems enable applications on vacuum systems and increase the safety in case of pressure and power failure. Furthermore a special variation of the AKO pinch valve enables a use into the ex-zones pursuant with the ATEX directive 94/9/EG. Pinch Valves comply with PED (97/23/EC) Industrial areas: Pneumatic conveying systems Cement/silo branch Pigments and granulates Ceramic/glass/plastic industry Sewage water industry Pharmaceutical-/food industry Vacuum toilet systems Dosing/weighing systems Powder coating systems Vacuum conveying systems * Please ask for suitable fluids. 2
3 Flange Types Flange variations: 1 1) aluminum / stainless steel aluminum, stainless steel, steel (DN 250) 2 2) Stainless steel/ steel bushing 3 3) With flange sleeve* exemplary view Flange connection according to 4) Internal thread DIN 1092 PN 10 or ANSI 150lbs 4 GT (see data sheet). series DN DI DA DD d screws TK L H G PS max. (bar) Internal threat ,5 1/8" /4" /4" 6 G 1½" /4" /4" 6 G 2" /4" /4" 6 G 2½" ,5 1/4" /4" 6 G 3" /4" /4" 6 G 4" /4" 6 - VA /8" /4" 6 - VA /8" /4" 6 - VA /2" /8" 4 - V /2" 2 - * Flange sleeve sealing increases the Dimension L (DN ) 3
4 Internal Thread Types Socket ends: 1) Stainless steel stainless steel, aluminum, POM, PVC 2) Plastic POM natural white 3) Plastic POM black* / conductive for harzadous areas *available with VMP series exemplary view VMP Internal thread connection acc. to 4) PVC **VM valve dimensions, please see p.6 DIN EN ISO 226 (G) or ANSI/ASME B1.20 (NPT). VM** series DN IG GT L 10 G ⅜" /8 6,0 VMP 10 G ⅜" /8 6,0 15 G ½" /8 6,0 VMP 15 G ½" /8 6,0 20 G ¾" /8 6,0 VMP 20 G ¾" /8 6,0 25 G 1" /8 6,0 VMP 25 G 1" /8 6,0 32 G 1¼" /4 6,0 VMP 32 G 1¼" /4 4,5 40 G 1½" * /4 6,0 VMP 40 G 1½" /4 4,5 50 G 2" /4 6,0 VMP 50 G 2" /4 4,5 65 G 2½" /4 6,0 80 G 3" /4 6,0 100 G 4" /4 6,0 * Alternatively available is our K-variant length = 150mm D1 D2 G PS max. (bar) 4
5 Further models Socket ends: 1) Tri-Clamp*, stainless steel stainless steel, aluminum, (POM) Weld-on ends acc. to DIN row 2 or ASTM A554 2) Weld-on ends*, stainl. steel stainless steel, aluminum, (POM) Tri-clamp acc. to DIN row A+C. DIN (BKS) form A on request 3) Threaded spigot*, stainl. steel RJT connection stainless steel, aluminum, (POM) Threaded spigot (RJT) acc. to DIN DIN (GS) on request. * For detailed information please see separate data sheets of / E series. 4) Semi-silo Trailer Connection* 1, Stainless steel Aluminum VT * 1 For detailed information please see separate data sheet VT. Semi-silo trailer Connection acc. to DIN ) Threaded hose nozzles* 2, stainless steel Stainless steel SAS * 2 For detailed information please see separate data sheet SAS. 5
6 Phased-out models VM/VMF Internal Thread: 1) Plastic POM natural white stainless steel, aluminum, PVC VM 2) Stainless steel VMF exemplary view VM replaced by VMP/ VMF replaced by series DN IG T VM 10 G ⅜" VM 15 G ½" VM 20 G ¾" VM 25 G 1" VM / VMF 32 G 1¼" VM / VMF 40 G 1½" VM / VMF 50 G 2" SW L DA PS max. (bar) Sleeve materials Natural rubber (NR) abrasion resistant, NR food quality, NR high temp., EPDM, EPDM food black, EPDM food white, NBR, NBR food black, NBR food white, FPM, Silicone, CR, CSM, IIR Sleeve qualities electrically conductive: EPDM food black NR NBR Food mixtures of the a.m. rubber sleeves correspond with the regulations of food & drug administraion, USA, FDA CFR
7 Valve Accessories we offer complete solutions! Solenoid valve, filter regulator, pressure switch, quick exhaust valve, mounting bracket mounted on pinch valve, series. Please contact us. We are happy to supply you with the Pinch Valve/s fitted with the accessories of your choice. Solenoid valve safety arrangement pressure relief section quick exhaust valve pressure regulator mech. pressure switch digital pressure switch non return flow arrangement filter regulator AKO VAC basic AKO VAC comfort hand-lever valve Further Pinch Valve Accessories and more detailed information available on our data sheet " Z01-Valve Accessories". 7
Air operated Pinch Valves Connection options:
Air operated Pinch Valves Connection options: Flange Connection Internal Thread Connection Tri-Clamp Connection Weld-on ends RJT Connection AKO Innovative Pinch Valve Technology The valve solution for
Air operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
Air operated Pinch Valve type VMC
New! Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series
New! Vanne à manchon pneumatique Série VMC Air operated Pinch Valve of VMC Series Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends
Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC
New! Vanne à manchon pneumatique Type VMC Air operated Pinch Valve type VMC Raccord à bride / Flange Filetage intérieur / Internal Thread Raccord clamp / Tri-Clamp Raccord à souder / Weld-on ends Raccord
NEW. EHEDG certified Aseptic and hygienic Pinch Valves. The flexible modular system. Aseptic design for hygienic safe processes
NEW EED certified Aseptic and hygienic Pinch Valves The flexible modular system Aseptic design for hygienic safe processes Connections: Weld-on ends Flange Tri-Clamp Threaded Spigot (RJT) Weld-on end Tri-Clamp
i butt weld spigot i flanged end acc. to DIN PN 10 / 16
body material PVC-U PVC-C PP PVDF ball seat PTFE other seats iepdm ifpm i *) working temperature 0 C to 50 C 0 C to 90 C -20 C to 80 C nominal size DN to DN connection with pipe legth acc. to EN 558-1
pvc-u section guide application guide standards and approvals
pvc-u Unplasticised Polyvinyl Chloride (PVC-U) is the most widely used of all plastics used for pipe installations. It is rigid, versatile, and is suitable for both above or below ground installations.
2 way ball valve M1 with pneumatic actuator
Praher Plastics Austria GmbH DB/EN/DEEN/14/03/335 Subject to change without prior notice!! General: Valve body: Sealing material: Ball seating joint: Dimensions: PVC-U EPDM / FPM PTFE DN10 DN50 d16 d63
Distributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
Ball Valves SBV Series full-port
SV: Product Info 23 all Valves, plastomer-lined PM 23 M.00 e December 2006 all Valves SV Series full-port Ideally suited for positive shut-off, flow control and throttling of corrosive, abrasive or even
SCP Cylindrical Plug Valves plastomer-lined PM 22 e / Modular Design
DN15 DN100 resp. ½" 6" RP (red. port) SCP Cylindrical Plug Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even toxic process media in either liquid or gaseous
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 20-02-2015 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
-H- Note. Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
Pinch valves VZQA Features
Features VZQA-C-M22C function The pinch valve is a 2/2-way valve for controlling material flows. It is closed in normal position. The shut-off element is a tubular pinch valve sleeve made from elastomer.
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
Type 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
Diaphragm seal with sterile connection For sanitary applications Models , , and , threaded connection
Diaphragm seals Diaphragm seal with sterile connection For sanitary applications Models 990.18, 990.19, 990.20 and 990.21, threaded connection WIKA data sheet DS 99.40 for further approvals see page 3
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
NORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,
Cylindrical Valves SCP Series
SCP: Product Info 22 Cylindrical Valves, plastomer-lined PM 22 M.00 e May 2004 Cylindrical Valves SCP Series are ideally suited for Shut-off, Flow Control and Throttling of corrosive, abrasive or even
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
SINGLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.6
Application Single-eccentric butterfly valves are industrial valves, which are designed to fully open or close a passage of the working medium flowing through a pipeline. They can also be used for flow-control
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
PRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
VF - VM - VMF - VMP - VMC - VMCE - VT
Operating Manual (Original) for Air operated Pinch Valves Series VF - VM - VMF - VMP - VMC - VMCE - VT Ex-Series VMX - VMPX - VMCX - VFX Contents 1. Saf e t y I n s t r u c t i o n s 3 Special conditions
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact
Level switches Series LC40 Float level switch for liquids
Level switches Series LC40 Float level switch for liquids Simple and robust construction Versatile and easily adaptable to the different control positions of the industrial processes Side or top of the
EXTRACTION CHECK VALVES TYPE C09.6
Application Extraction check valves are valves used to to prevent the back flow of the service fluid in extraction and bleed lines of steam turbines. Each extraction check valve is designed exactly for
FULLY WELDED BALL VALVES
FULLY WELDED BALL VALVES 2 PERFORMANCE FROM START TO FINISH Ensuring the safety of the entire pipeline system requires the valves for oil and gas applications to be able to meet the most challenging demands.
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
NAF-Torex butterfly valves DN , Size 3-28, PN 10-40, ANSI Class 150, 300
NAF-Torex butterfly valves DN 80-700, Size 3-28, PN 10-40, ANSI Class 150, 300 Fk 41.42(18)GB 11.04 Primary characteristics NAF-Torex, High-Performance butterfly valve is available with either metal-to-metal
Butterfly valves Plastic and Metal
Butterfly valves Plastic and Metal Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Innovative technology GEMÜ is a leading world-wide manufacturer of high quality valves, measurement
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
Powder and Bulk Technology
Powder and Bulk Technology LIQUID MEDIA BUTTERFLY VALVE BULK MATERIAL WELCOME TO The Company Since more than 40 year we are manufacturing shut-off valves of highest quality which are installed successfully
Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance actuator. Normally Closed, Normally Open and Double Acting control functions are available.
Manual Valves. The solution you ve been looking for
Manual Valves Larox manual valves Larox manual valves are ideal for shut off applications that involve abrasive or corrosive slurries, powders or granular substances. Our advanced flow control solutions
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Diaphragm valve MV 309
Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)
BUTTERFLY VALVES + NA ELECTRIC ACTUATOR
1150-1158 BUTTERFLY VALVES + NA ELECTRIC ACTUATOR CHARACTERISTICS The butterfly valves 1150 to 1158 are dedicated to the automatic opening/shut-off of various fluid pipes. It has a ductile iron body. Thanks
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Peter Meyer Ball valves Cryogenic
Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing
485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
Pinch valves VZQA. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qgenerally ready
PNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
Type 514, 515, 517, 519
Diaphragm Valve Type 514, 5, 517, 519 General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM, NBR, PTFE/EPDM, PTFE/FPM,
Modular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
Valvola a manicotto pneumatica Serie VMC Air operated Pinch Valve of VMC Series
New! Valvola a manicotto pneumatica Serie VMC Air operated Pinch Valve of VMC Series Flange / Flange Filettatura interna / Internal Thread Triclamp / Tri-Clamp Raccordo a saldare / Weld-on ends Raccordo
Angle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
Control valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm
2/2 or 3/2-way Solenoid Valve, with pivoted armature and isolating diaphragm Lockable manual override as standard For liquid, gaseous and aggressive media Long service life, even in non-lube conditions
Continuous level measuring system NB 4000 Selection list
Table of contents Page Overview P2 Specification / application P3 P4 Options / Accessories P6 Dimensions / materials P7 Spare parts P9 Electrical installation P11 Subject to change. All dimensions in mm
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
Type Electrically Actuated Ball Valve
Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,
MANUAL VALVES. The solution you ve been looking for THE SOLUTION YOU VE BEEN LOOKING FOR
al es MANUAL VALVES The solution you ve been looking for LAROX MANUAL VALVES Larox manual valves are ideal for shut off applications that involve abrasive or corrosive slurries, powders or granular substances.
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
VersaFlow Coriolis 100 Mass Flow Sensor Specifications
VersaFlow Coriolis 100 Mass Flow Sensor Specifications 34-VF-03-09 May 2011 The Universal Solution for the Process Industry VERSAFLOW is the only sensor for mass flow in its class with secondary pressure
BALL VALVE of carbon steel with welded ends / threaded ends / flanges series
with welded ends / threaded ends / flanges 34000-34500 series C ont R o L Operation Edition 05-07-2016 Ball valve series 34000-34500 is a tight on-off valve and suitable for liquid and air pipe systems.
Compression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
Seal: NBR. Silicone-free. Regulations. DI: 2002/95/EC (RoHS) RG: 1907/2006 (REACH) DI: 97/23/EC (PED)
Non-Return Valves Non-return valves allow compressed air to flow in one direction and prevent it from flowing in the other. Fitted upstream of the circuit to be protected, they provide total protection.
WEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
VALV Diaphragm Valves 2015
VALV Diaphragm Valves 2015 VALV Diaphragm Valves Benchmark for quality, precision and reliability Flexibility, professionalism, quality - "High Mech" by VALV A special feature of VALV aseptic valve bodies
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
1" 42" SBP Butterfly Valves plastomer-lined PM 51 us /
1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design Valves are available
BULK SOLIDS FEEDING. Distributor of. Rotary Valve RV RVR RVR
BULK SOLIDS FEEDING Distributor of Rotary Valve RV RVR RV RVR Rotary Valve RV RVR High filling efficiency and precise metering in gravity feeding and pneumatic conveying of products in powder and granules.
2 way ball valve S4 with pneumatic actuator
General: Material: Sealing material: Ball seating joint: Dimensions: PVC-U / PP / PVDF EPDM / FPM PTFE DN0 DN80 d6 d0 3/8 4 symbol photo PVC Solvent socket Solvent spigot Threaded socket Fixed flange Backing
SBP Butterfly Valves 1" 42"
PRODUCT MANUAL PM SBP: Product Info 51 Butterfly Valves, plastomer-lined PM 51 M.00 us SBP Butterfly Valves 1" 42" are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED SERIES 61, 14" TO 24" 61W - Wafer style and 61L - Lugged style FEATURES
VALVES & CONTROLS KEYSTONE BUTTERFLY VALVES RESILIENT SEATED 61W - Wafer style and 61L - Lugged style FEATURES Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
Type 567. Wafer Style Butterfly Valve
Wafer Style Butterfly Valve Type 5 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM Stem: 31 stainless steel Operation:
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
DN25 DN1000 resp. 1" 42"
DN25 DN1000 resp. 1" 42" SBP Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
AUTOMATIC VALVES. The solution you ve been looking for THE SOLUTION YOU VE BEEN LOOKING FOR
al s AUTOMATIC VALVES The solution you ve been looking for LAROX AUTOMATIC VALVES Larox automatic valves are ideal for shut off or control applications that involve abrasive or corrosive slurries, powders
SBE Butterfly Valves elastomer-lined PM 52 e / Modular Design
DN40 DN800 resp. 1½" 32" SBE Butterfly Valves are ideally suited for Shut-off, Flow Control and Throttling of corrosive and abrasive process media in either liquid, powdery or gaseous state. Modular Design
Type 147. Electrically Actuated Lug Butterfly Valve
GF Piping Systems Electrically Actuated Lug Butterfly Valve Type 147 General Size: 2 12 Outer Body: Glass-filled PP Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seals: EPDM, FPM, PTFE/FPM
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES
STEAM EXTRACTION / COLD REHEAD ACTUATED CHECK VALVES More than 20 years of experience in design and manufacturing and service of custom made actuated Steamextraction Check valves for the Power Generation
w.npvequipment.co.th VM DN PVC-U Diaphragm valve
VM DN 15 100 PVC-U Diaphragm valve VM DN 15 100 The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective
Brass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
Butterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a
Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a Application Tight-closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15
TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions