Continuous level measuring system NB 4000 Selection list
|
|
|
- Brendan Cook
- 6 years ago
- Views:
Transcription
1 Table of contents Page Overview P2 Specification / application P3 P4 Options / Accessories P6 Dimensions / materials P7 Spare parts P9 Electrical installation P11 Subject to change. All dimensions in mm (inches). All prices in Euro, excluding VAT. All prices are EXW Betzigau, excluding packaging costs. Valid: From until , unless otherwise agreed. By publishing this selection list all other lists become invalid. We assume no liability for typing errors. Different variations to those specified are possible. Please contact our technical consultants. pl page P 1
2 Overview Features Continuous level measurement of solids applications Process Independent of bulk material properties Accurate measurement Service Simple installation and commissioning Rope and tape version with long service life Low maintenance Approvals Approval for use in Hazardous Areas 2011/65/EU RoHS conform Mechanics Measurement range up to 30m (100ft) 1 1/2" process connection possible Aiming flange to be mounted directly on a flat silo roof Internal tape cleaner for difficult materials Electronics Micro processor controlled measurement Diagnostic possibilities Output 4-20mA Two programmable Relay (can be used as Counting/reset pulse output or as Failure / Upper stop position) NB 4100 Rope version Fig. with flange DN 100 and PVC sensor weight NB 4200 Tape version Fig. with thread connection and stainless steel sensor weight NB 4100 Rope version Fig. with aiming flange and stainless steel sensor weight with pin page P 2 pl010415
3 Specification / application Specification Process Measurement range 15m (50ft) or 30m (100ft) Process temperature Process overpressure 80 C (176 F) -0,2.. +0,2 bar ( psi) Min. powder density >300 g/l (18 lb/ft 3 ) Electronics Power supply AC version 115V or 230V 50-60Hz DC version V Output 4-20mA 2 relais (optional) Approvals Dust Ex ATEX 1/2D FM Cl. II, III Div. 1, TR-CU Ordinary Location CE, FM, TR-CU Metrological certification (Belarus) Application Solids measurement Aiming flange screwed directly to the silo roof pl page P 3
4 NB 4100 Rope version (fig. with flange DN 100 and PVC sensor weight) NB 4200 Tape version (fig. with thread connection and stainless steel sensor weight) Cable entries (by default) Depending on selected version (options see pos. 26): CE, ATEX, TR-CU Screwed cable gland: 1x M25x1.5 and 1x M20x1.5 Blindplug: 1x M20x1.5 FM Open conduit ANSI B1.20.1: 1x NPT 3/4" and 1x NPT 1/2" Blindplug: 1x NPT 1/2" Dimensions see page P7 page P 4 pl010415
5 pos. 1 pos. 2 pos. 3 pos. 4 pos. 5 Basic type C NB 4100 Rope version... D NB 4200 Tape version... Certificate 0 CE (1)... W ATEX II 1/2 D... M FM general purpose... N FM Class II, III Div.1 Group E-G... E TR-CU DIP A20/ A21... Measurement range 1 15m (50ft) m (100ft)... Power supply 1 230V 50-60Hz V 50-60Hz V DC... Process connection A Thread R 1 1/2 inch tapered DIN B Thread NPT 1 1/2 inch tapered ANSI B X Flange DN100 PN16 (EN1092-1) and flange 4" 150lbs ANSI B16.5 (unit is fitting to this flange)... Y Flange 2" and flange 3" 150lbs ANSI B16.5 (unit is fitting to this flange)... W Aiming flange (to be mounted directly to the silo roof) (5)... Basic type NB pos. 6 Sensor weight (2) Y without (3)... A PVC (4)... C Stainless steel... E Folding cover... Position Order code All positions are available in special design (use code "Z"). (1) (2) (3) (4) (5) TR-CU (Ordinary Locations) included For use in Hazardous Locations (Dust Ex): It must be ensured, that no static discharge from the material surface can occur. Sensor weights, which can be used in case of possible static discharge, on request. Only for tape version. Including mounting set for sensor weight (see page P9: Sensor weights) Does not fit through a 1 1/2 inch nozzle, must be mounted after fixing the unit to the silo Mounting without a socket. Including fixing material (screws, sealing etc.) pl page P 5
6 Options / Accessories Options pos. 11 x Guarantee extension to 5 years... Wear and tear parts rope/tape and motor not included pos. 21 Weather protection cover... For Ex only approved for Zone 22 or Division 2 pos. 22 Internal heater... Needed for: ambient temp. <-20 C (-4 F) or condense water inside silo or wet process atmosphere (Note: <-20 C (-4 F) with ATEX, FM Class II or TR-CU on request possible) pos. 23 Length of socket pipe 1 200mm (7.87") mm (19.7") mm (39.4")... pos. 24 Pin for sensor weight... POM or stainless steel (in accordance to selected sensor weight material, not for pos.6 E) pos. 25 Relais output... Two relais (possible indication; Failure, reset pulse, counting pulse, upper stop position) pos. 26 Cable entry Selection of the following options only necessary, if a deviation from the default cable gland / conduit is required: 0 Screwed cable gland 1x M25x1,5 + 1x M20x1,5 + blindplug 1x M20x1,5... A Conduit 1x NPT 3/4"+ 1x NPT 1/2" + blindplug 1x NPT 1/2"... Accessories Fixing material for mounting the unit on a flange zu bolts M16x60, 8 washers, 4 nuts. Stainless steel.... Sealings for mounting the unit on a flange di Flange sealing for DN100 PN16 / 4" (neoprene)... di Flange sealing for 2" / 3" 150lbs (neoprene)... Adapter NPT 1 1/2" to NPT 3" zu Thread tapered ANSI B1.20.1, aluminium... Adapter NPT 1 1/2" to NPT 3" Weather protection cover Pin for sensor weight POM or (303) page P 6 pl010415
7 Dimensions and materials Basic unit Process connection: Flange Process connection: Aiming flange To be screwed directly to the silo roof 0-50 adjustable Including screws, nuts and sealing Process connection: Thread Rope / tape Silo roof Flange plate outside dimensions: Width x Heigth: 120mm x 180mm (4.7"x7.1") Dimensions X = Length to bottom of sensor weight (in upper stop position, see next page) A = Length of socket pipe 100mm (3.9") Optional 200mm (7.9") / 500mm ( 19.7") / 1000mm ( 39.4") Materials Housing outside Housing inside Thread / Flange Aluminium, powder coated Aluminium Aluminium Flanges fitting to: DN100 PN16 / 4" 150lbs fitting to: 2" / 3" 150lbs Lk = ø mm ( ") slot d2 = ø19mm (0.75") Lk = ø mm ( ") slot d2 = ø19mm (0.75") Aiming flange Aluminium / (301) Rope (316) Tape (301) Rope ø1,0mm (0.04") Tape 12x0.2mm (0.47x0.008") pl page P 7
8 Dimensions and materials Sensor weights Rope version PVC Stainless steel Folding cover Material: (303) All sensor weights: 1,6 kg (3.5 lbs) 380x380mm (15x15") Material: (301)/ PA canvas For material densitiy >20g/l (1.2lb/ft 3 ) Fits through 1 1/2" mounting hole Tape version PVC Stainless steel Folding cover Material: (303) Fixing elements between tape and sensor weight: aluminium / (303) 380x380mm (15x15") Material: (301)/ PA canvas For material densitiy >20g/l (1.2lb/ft 3 ) Fits through 1 1/2" mounting hole All sensor weights: 1,6 kg (3.5 lbs) page P 8 pl010415
9 Spare parts Roller sl Rope roller with 15m rope... sl Rope roller with 30m rope... sb Tape roller with 15m tape... sb Tape roller with 30m tape... Sensor weights All sensor weights are delivered incl. mounting set for proper fixing to the rope/tape and excl. rope/tape For rope version: sl PVC without pin... sl PVC with pin... sl Stainless steel without pin... sl Stainless steel with pin... sl Folding cover... For tape version: sb PVC without pin... sb PVC with pin... sb Stainless steel without pin... sb Stainless steel with pin... sb Folding cover... Motor gm Motor... Electronics pl V 50-60Hz 4-20mA without 2 Relais and without Internal Heater Control... pl V 50-60Hz 4-20mA with 2 Relais and with Internal Heater Control (1)... pl V 50-60Hz 4-20mA without 2 Relais and without Internal Heater Control... pl V 50-60Hz 4-20mA with 2 Relais and with Internal Heater Control (1)... pl V DC 4-20mA without 2 Relais and without Internal Heater Control... pl V DC 4-20mA with 2 Relais and with Internal Heater Control (1)... Required information: Rope or Tape version; measuring range 15m or 30m; evt. further menue presettings. Internal Heater (2) em Ohms For power supply 230V 50-60Hz... em Ohms For power supply 115V 50-60Hz... em ,2 Ohms For power supply V DC... Weather protection cover zu (1) (2) Implements the electronic components needed to control the Internal Heater (needed for option pos.22) Used for replacement for already mounted heater. In case of re-fitting the Internal Heater, the electronics must include components for the Internal Heater Control (please contact factory). pl page P 9
10 Spare parts Sensor weights All sensor weights are delivered including stated parts for proper fixing to the rope / tape Rope version Tape version Mounting set Sensor weight Sensor weight Mounting set Electronics Motor Internal heater Weather protection cover page P 10 pl010415
11 Electrical installation Power supply AC version DC version AC or DC supply depending on ordered version 230V or 115V 50-60Hz 20-28V DC Signal input: Start of measurement Start contact Start +24V alternative Measurement interruption in case of filling. If used, remove factory provided connection. Signal output: 0/4-20mA active, isolated max. 500 Ohms Signal output: Relais (optional) Relay1 Relay2 Fuse: max. 2A, 250V, HBC,fast or slow max. 250V AC, 2A, 500VA, non inductive pl page P 11
Continuous level measuring system NB 3000 Selection list
Table of contents Page Overview 2 ------------------------------------------------------------------------------------------------------------------- Specifications 3 -------------------------------------------------------------------------------------------------------------------
Continuous level measuring system. LevelMax. Selection Guide. Overview 2
Table of contents Page Overview 2 ------------------------------------------------------------------- Specification / application 3 ------------------------------------------------------------------- 4
Continuous level measuring system NB 3000 Selection list. Overview
Table of contents Page Overview P2 ------------------------------------------------------------------------------------------------------------------- Specifications P3 -------------------------------------------------------------------------------------------------------------------
Level limit switch Series CN 4000 Selection list. Specifications 2. Applications 4
Table of contents Page Specifications 2 Applications 4 ------------------------------------------------------------------------------------------------------------ CN 4020 5 Short extension length ------------------------------------------------------------------------------------------------------------
Level limit switch Series RF 3000 Selection list
Table of content Page Overview P2 Applications P4 ------------------------------------------------------------------------------------------------------------- RF 3100 Standard version P6 -------------------------------------------------------------------------------------------------------------
Level limit switch Series RN 4000 Selection list. Overview / Specification / Applications
Table of contents Page Overview / Specification / Applications P2 ----------------------------------------------------------------------------------------------------------- Selection P3 -----------------------------------------------------------------------------------------------------------
Level limit switch Series RN 3000 / 6000 Selection list
Table of contents Overview 2 Specifications 4 Applications 6 Page -------------------------------------------------------------------------------------------------------- RN..001 8 Short extension length
Level limit switch Series RN 3000 / 6000 Selection list. Overview. Specifications. Applications
Table of contents Page Overview Specifications Applications P2 P4 P6 --------------------------------------------------------------------------------------------------------- RN..001 Short extension length
Level limit switch Series RN 3000 / 6000 Selection list
Table of contents Page Overview Specifications Applications P2 P4 P6 -------------------------------------------------------------------------------------------------------- RN..001 Short extension length
Level limit switch Series RN 3000 / 6000 Selection list. Overview
Rotonivo Table of contents Page Overview Specifications Applications P2 P4 P6 -------------------------------------------------------------------------------------------------------- RN..00 Short extension
Continuous Level Measuring System. LevelMax. Instruction Manual
Continuous Level Measuring System 1 Table of contents Page Safety notes / Technical support Introduction Dimensions and materials Options / Accessories Technical data Mounting Mounting with aiming fl ange
Overview. Specifications. Applications
Vibranivo Level limit switch 1 Series VN 00 / 000 / 000 / 000 Table of content Page Overview P Specifications P Applications P ------------------------------------------------------------------------------------------------------------
DWYER INSTRUMENTS, INC. Phone: 219/ P.O. BOX 373 MICHIGAN CITY, INDIANA 46360, U.S.A. Fax: 219/
Series DBOB-Continuous Level Measuring System Bulletin L-DBOB Specifications - Installation and Operating Instructions 7-9/32 [185.00] 5-45/64 [145.00] 8-21/32 [220.00] 5-45/64 [145.00] 10-1/32 [255.00]
Nivobob 1. Table of contents. Continuous level measuring system NB 4000 Technical information / Instruction manual. Page
Nivobob 1 Table of contents Page Safety notes / Technical support ------------------------------------------------------------------------------------------------------ Introduction ------------------------------------------------------------------------------------------------------
Level MONITORING. Continuous Level Measurement ILS
Level MONITORING Continuous Level Measurement ILS Continuous Level Measurement ILS Reliable continuous level MEASUREMENT DEVICES FOR ANY KIND OF BULK SOLIDS STORED IN SILOS AND CONTAINERS A sensor weight,
Capanivo Series CN 4000
Capanivo Series CN 4000 Instruction manual 010516 1 UWT GmbH Westendstraße 5 Tel.: +49 (0)831 57123-0 Internet:www.uwt.de D-87488 Betzigau Fax: +49 (0)831 76879 E-Mail: info@uwt.de Scope of this instruction
introduction function electrical connection signal describtion parameter adjustment commissioning, mounting, safety items error codes
list of contents page introduction G1 function G1 technical data G2 - G3 electrical connection G4 signal describtion G5 parameter adjustment G6 - G7 commissioning, mounting, safety items G8 error codes
Table of contents Page Safety notes / Technical support Introduction Technical data Approvals Options Mounting Electrical installation 1 Signal output 1 Sensitivity setting 1 Maintenance 1 Notes for use
Level Limit Switch soliphant FTM 930/931/932/ Z
Technical Infmation TI 042F/00/e Level Limit Switch soliphant FTM 930/931/932/ Z F Universal Application with Bulk Materials and Dust Ex Area Application The Soliphant has a wide range of safe applications
UWT Lot. Table of contents. Continuous level measuring system SLS 3000 Technical information / Instruction manual. Page
Table of contents 1 Page Introduction G Function / Approvals G Technical data G Electrical connection G Signal description G Parameter adjustment G Commissioning, Mounting, Safety instructions G Interface
Level Limit Switch soliphant II FTM 30 (D/S), FTM 31 (D/S), FTM 32 (D/S)
Technical Information TI 9F/00/en Level Limit Switch soliphant II FTM 0 (D/S), FTM (D/S), FTM (D/S) Universal vibration limit switch for fine-grained bulk solids Suitable for dust explosion hazardous areas
Point level measurement Capacitance switches
Pointek CLS300 Standard Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level switch with optional rod/cable choices and configurable output.
Level Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. 4/18 Siemens FI Overview.
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
Level Measurement. Point level measurement Capacitance switches. Pointek CLS200 Standard. icenta Controls Ltd
Pointek CLS200 Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level switch with optional rod/cable choices liquids, solids,
Absolute pressure gauge with switch contacts For the process industry, NS 100 and 160 Models , and
Pressure Absolute pressure gauge with switch contacts For the process industry, NS 100 and 160 Models 532.52, 532.53 and 532.54 WIKA data sheet PV 25.02 for further approvals see page 4 Applications Control
Level Measurement Point level measurement - RF Capacitance switches
Pointek CLS200 - Standard Overview Configuration Installation Pointek CLS200 (standard version) is a versatile inverse frequency shift capacitance level and material detection switch with optional rod/cable
Rotary blade level indicators Level limit switches for bulk goods. Accessories
Storm tape Weather protection hood for outdoor use as protection against overheating in the case of strong radiation from the sun. -SH Weather protection hood with storm tape... 8,-- Material PVC, RAL
Soliswitch FTE30. Technical Information
Technical Information Soliswitch FTE30 Level limit switch Economical paddle limit switch with type-examination certificate to ATEX dust Ex-approval zone 20 Application The universal paddle level limit
Linear Valve Electric Actuator
Linear Valve Electric Actuator www.powervalves.nl Company Profile Company Profile Sun Yeh Electrical Ind. Co., Ltd. was founded in 1986. We always strive for technical excellence, innovation and the highest
CVR-625. Compact Vibrating Rod Instruction Manual
CVR-625 Compact Vibrating Rod Instruction Manual BinMaster: Division of Garner Industries 7201 N. 98th St., Lincoln, NE 68507 402-434-9102 email: info@binmaster.com www.binmaster.com OPERATING INSTRUCTIONS
Soliswitch FTE20. Technical Information. Point level switch for granular solids
Technical Information Point level switch for granular solids Applications The is a paddle switch for granular solids. Its robust and compact design makes the point level switch an ideal sensor for detecting
Positive displacement batch controller
8075 Batch controller Positive displacement batch controller Type 8075 can be combined with... Compact version for DN15 to DN100 Dosing On site calibration by Teach-In Check of input/output signals Total
Field IT Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters Standard Model with Booster Stage
Data Sheet Field IT Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters Standard Model with Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use
Soliphant II FTM30(D/S)/31(D/S)/32(D/S)
Technical Information Soliphant II FTM0(D/S)/(D/S)/2(D/S) Level Limit Switch Universal vibration limit switch for fine-grained bulk solids Suitable for dust explosion hazardous areas Application Soliphant
DIAMOND POINT VIBRATING PROBES
DIAMOND POINT VIBRATING PROBES DP130 DP120 DP140 DP150 Instruction Manual Third revision, April 2016 Hycontrol Ltd., Larchwood House, Orchard Street, Redditch, Worcestershire, B98 7DP, U.K. Tel: + 44 (0)1527
GA 24 Heavy-duty variable area flowmeter
KROHNE 10/99 D 11 GA24 01 E GR Heavy-duty variable area flowmeter Variable area flowmeters Vortex flowmeters Flow controllers Electromagnetic flowmeters Ultrasonic flowmeters Mass flowmeters Level measuring
Level Measurement. Point level measurement Capacitance switches. Pointek CLS300 Standard. 5/42 Siemens FI Overview.
Level Measurement Pointek CLS300 Standard Siemens AG 20 Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level switch with optional rod/cable
Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage
Data Sheet Actuators & Positioners Electro-Pneumatic Converters I/P Signal Converters - TEIP 11 Model without Booster Stage Reliable through well-proven concept - More than 1,000,000 units in use Compact
Operating Instructions Mechanical Temperature Switches ML1H,MT1H,L2H,T2H,L1X/L1X-EX,T1X/T1X-EX,T2X/T2X-EX
ATEX Type Certification marking for type L1X-EX, T1X-EX, T2X-EX Type of protection "d" explosion-proof enclosure Operating Instructions Mechanical Temperature Switches ML1H,MT1H,L2H,T2H,L1X/L1X-EX,T1X/T1X-EX,T2X/T2X-EX
Level limit switch Series RN 3000 / 6000 Technical information / Instruction manual
Rotonivo 1 Series RN 000 / 000 Table of contents Page Safety notes/ Technical support --------------------------------------------------------------------------------------------------------- Introduction
V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
Level Probes multicap T DC 12 TA multicap T DC 11/16/21/26 TAN/TAS
Technical Information TI 239F/00/en Level Probes multicap T DC 12 TA multicap T DC 11/16/21/26 TAN/TAS Compact capacitive level probes (with North American certificates). Fully and partially insulated
FF03. Rotary Blade Level Switch for bulk goods. Level Measurement and Monitoring
Level Measurement and Monitoring FF03 Rotary Blade Level Switch for bulk goods For bulk good with grain size up to 150 mm and bulk weight from 0,01 up to more than 2,0 t/ m³ Robust aluminium diecast housing
Level Probes multicap T DC 12 TE multicap T DC 11/16/21/26 TEN/TES
Technical Information TI 240F/00/en Level Probes multicap T DC 12 TE multicap T DC 11/16/21/26 TEN/TES Compact capacitive level probes (with European certificates). Fully and partially insulated rod and
Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF)
Level measurement Magnetic float switch For vertical installation Model FLS (models with Ex approval: 60, AL-ADF) TC Fluid Control WIKA data sheet LM LM 3001 30.01 for further approvals see page 3 Applications
Level instruments. Continuous level measurement - Capacitance transmitters SITRANS LC300. 5/262 Siemens FI Overview.
Overview Configuration is an inverse frequency shift capacitance continuous It is ideal for standard industrial applications in chemical, hydrocarbon processing, food and beverage and mining, aggregate
MECAIR 400 SERIES MANIFOLD MOUNT VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
400 SERIES MANIFOLD MOUNT VALVES CLEAN AIR SOLUTIONS CONSTRUCTION FEATURES VALVE DESCRIPTION COVER BODY PILOT DIAPHRAGM BOLTS AND SCREWS DIAPHRAGM BACKING DISK DIAPHRAGM SPRING Diecast aluminium (anodised)
Soliphant T FTM260. Technical Information. Level limit switch Cost-effective vibration limit switch for fine-grained solids
Technical Information Soliphant T FTM260 Level limit switch Cost-effective vibration limit switch for fine-grained solids Application Soliphant is a rugged level limit switch for use in silos containing
Electromagnetic Flow Monitor magphant
Technical Information TI 036D/06/en No. 50078457 Electromagnetic Flow Monitor magphant Monitoring and measurement Flow monitoring with selectable limit values (relay output) Flow measurement via 4...20
Level Measurement Point level measurement - RF Capacitance switches
Pointek CLS300 - Standard Overview Configuration Installation Pointek CLS300 (standard version) is an inverse frequency shift capacitance level and material detection switch with optional rod/cable choices
Level switches Series LC40 Float level switch for liquids
Level switches Series LC40 Float level switch for liquids Simple and robust construction Versatile and easily adaptable to the different control positions of the industrial processes Side or top of the
Metal tube variable area flowmeter for gases, liquids and steam
Metal tube variable area flowmeter for gases, liquids and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h, kg/h, t/h,
Resistance thermometer For additional thermowell, flameproof enclosure (Ex d) Model TR10-L
Temperature Resistance thermometer For additional thermowell, flameproof enclosure (Ex d) Model TR10-L WIKA data sheet TE 60.12 for further approvals see page 2 Applications Chemical industry Petrochemical
Compact System NRGS 11-2 NRGS Original Installation Instructions English
Compact System NRGS 11-2 NRGS 16-2 EN English Original Installation Instructions 810366-05 1 Contents Important Notes Page Usage for the intended purpose...4 Safety note...4 LV (Low Voltage) Directive
MECAIR 200 SERIES THREADED VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
200 SERIES CLEAN AIR SOLUTIONS - 200 SERIES CONSTRUCTION FEATURES VALVE Lock nut DESCRIPTION COVER Diecast aluminium (anodised) BODY Diecast aluminium (anodised) PILOT BASE Aluminium (anodised) PILOT Stainless
Flygt /181. Parts List
Flygt 045.091/181 Parts List Table of Contents Table of Contents Introduction... Purpose of this manual... Disclaimer... Data for ordering spare parts... Specially approved products... Qualification of
Gas-actuated thermometer with switch contacts Stainless steel version Model 73
Temperature Gas-actuated thermometer with switch contacts Stainless steel version Model 73 WIKA data sheet TV 27.01 for further approvals see page 12 Applications Control and regulation of industrial processes
DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 bar up to 0... 600
Solenoid Valves Type 3963
Mounting and Operating Instructions Solenoid Valves Type 3963 Fig. 1 General Assembly, commissioning and operation of these devices may only be performed by experienced personnel. Proper shipping and appropriate
Surface thermocouple Model TC50
Temperature Surface thermocouple Model TC50 WIKA data sheet TE 65.50 for further approvals see page 2 Applications To measure surface temperatures on flat surfaces or pipes, in both laboratory and industrial
Table of contents Series VN 00 / 000 / 000 / 000 Page Safety notes / Technical support G --------------------------------------------------------------------------------------------------------- Introduction
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases
Glass tube flowmeters Series 6000 Variable area flowmeter for liquids and gases Easy installation Local indication by means of direct reading Low pressure drop Scales directly in l/h, m 3 /h, kg/h, l/min,
Micro Motion 7827 Digital Viscosity Meter
Product Data Sheet PS-001217, Rev. C April 2013 Micro Motion 7827 Digital Viscosity Meter Micro Motion viscosity meters are built to tackle the most demanding process and control applications. Rugged and
MECAIR 600/700 SERIES FLANGED VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
600/700 SERIES CLEAN AIR SOLUTIONS CONSTRUCTION FEATURES VALVE COVER BODY PILOT DIAPHRAGM BOLTS AND SCREWS DIAPHRAGM BACKING DISK DIAPHRAGM SPRING Diecast aluminium (anodised) Diecast aluminium (anodised)
Operating Instructions Type MPT 53
Operating Instructions www.turnstiles.us Type MPT 53 Contents 1. Delivery... 2 2. Safety...3-4 3 Description and operation... 5 4. Technical Data 6 5. oundation...6-9 6. Assembly and installation...10-13
ABB MEASUREMENT & ANALYTICS DATA SHEET. TEIP11 I/P signal converter for standard signals
ABB MEASUREMENT & ANALYTICS DATA SHEET TEIP11 I/P signal converter for standard signals 2 TEIP11 I/P SIGNAL CONVERTER FOR STANDARD SIGNALS DS/TEIP11-EN REV. D Flow in air pressure Proven and reliable concept
YFC. Limit switch. Ex d. 24 operating head types
Ex d YFC Limit switch 24 operating head types - Group IIC - Zone 1, 2, 21, 22 - Aluminium alloy - Easy installation, wiring and maintenance - Durable and safe over time Fastening system Earth screw RAL735
Linear actuators DFPI
Linear actuators DFPI Linear actuators DFPI Key features General information Linear actuator for actuating process valves such as gate valves and shut-off valves in process automation systems Linear actuator
JUMO dtrans p20 DELTA
Data Sheet 403022 Page 1/9 JUMO dtrans p20 DELTA Differential pressure transmitter Brief description The JUMO dtrans p20 DELTA differential pressure transmitter with HART interface combines maximum precision
k Applications Bourdon tube pressure gauge with switch contacts For the process industry, NS 100 and 160 Models PGS and PGS23.
Pressure Bourdon tube pressure gauge with switch contacts For the process industry, NS 100 and 160 Models PGS23.100 and PGS23.160 k Applications for further approvals see page 7 WIKA data sheet PV 22.02
Level Measurement. Continuous level measurement - Capacitance transmitters SITRANS LC500. 5/282 Siemens FI Overview.
SITRANS LC00 Overview Configuration Installation Build up of material or condensation in active shield area does not affect switch operation. SITRANS LC00 is an inverse frequency shift capacitance level
MECAIR 300 SERIES DRESSER NUT VALVES CLEAN AIR SOLUTIONS PRODUCT LEAFLET
300 SERIES DRESSER NUT VALVES CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES VALVE FLUIDS PRESSURE RANGE Filtered air and oil free Standard Nitrile: 20 C/+80 C Optional Viton: 30 C/+200
Series 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-1 Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating, automatic adaptation to valve and
Metal tube flowmeters. Series SC250. Metal Tube Flow Meters. Series SC250. Variable area flowmeter for liquids, gases and steam
Metal tube flowmeters Variable area flowmeter for liquids, gases and steam Metallic or plastic tube with a robust construction Indication by means of magnetic coupling Scales calibrated in l/h, m 3 /h,
Level switches (two-term level controllers) ERH-xx-04,-06,-07,-16,-16.1 Description
edit. II 2015/ page 1 Level switches (two-term level controllers) ERH-xx-04,-06,-07,6,6.1 Description The limit level signalling or two-term liquid level control in the open or closed pressure tanks. The
Operating instructions According to Directive 2014/34/EU (ATEX) Annex II p group II, equipment category 1/2D
1. Introduction Fig.1 MAX. ( Process ) MIN. ( Ambient ) The Rotative Level Control RL-A AD1/2* are used to detect the level of materials such as dust or granules in containers. They are supplied with plastic
Mobrey MSM400 Ultrasonic sludge density measurement system
Technical specification sheet IP257 October 2008 Mobrey MSM400 Ultrasonic sludge density measurement system Level Features Measuring range up to 50% solids Simple keypad operation HMI menu based programming
Thermocouple For additional thermowell, flameproof enclosure (Ex d) Model TC10-L
Temperature Thermocouple For additional thermowell, flameproof enclosure (Ex d) Model TC10-L WIKA data sheet TE 65.12 for further approvals see page 2 Applications Chemical industry Petrochemical industry
XMP ci. Process Pressure Transmitter with HART -communication. Ceramic Sensor. accuracy according to IEC 60770: 0.1 % FSO.
Process Pressure Transmitter with HART -communication Ceramic Sensor accuracy according to IEC 60770: 0.1 % FSO Nominal pressure from 0... 160 mbar up to 0... 20 bar Output signals 2-wire:... 20 ma others
Integrated Control modules
.60.0 Rev. 0 Page of 9 Integrated Control modules QC, QC2 and QC Features: - Basic actuator functions for: - Spring return applications, or - Double acting applications or, - Double acting Fail in Last
Design and application
Design and application The function of the SGM is based on the variable area float principle. In all cases where a dependable device is required for indicating instantaneous values and monitoring the flow
Micro Motion F-Series Coriolis Flow and Density Meters
Product Data Sheet PS-00603, Rev. F December 2007 Micro Motion F-Series Coriolis Flow and Density Meters Micro Motion F-Series Coriolis meters offer highly accurate mass flow, volume flow, and density
JUMO dtrans p20. Process pressure transmitter. Type Brief description. Key features. Block diagram
Data Sheet 403025 Page 1/10 JUMO dtrans p20 Process pressure transmitter Brief description The JUMO dtrans p20 pressure transmitter with HART interface combines maximum precision with easy operation. It
We reserve the right to alter data according to improvements made. Previous documents become invalid with the issue of this document.
General information Actuator controls AC 01.2 for controlling multi-turn actuators of the SA/SAR type range and part-turn actuators of the SQ/SQR.2 type range. Features and functions Power supply Standard
Armstrong In-Line and Insertion Vortex Flow Meters
Armstrong In-Line and Insertion Vortex Flow Meters Designs, materials, weights and performance ratings are approximate and subject to change without notice. Visit for up-to-date information. 1 In-Line
High-pressure switch for gas, air, flue gases and combustion products GW 500 A4 GW A4/2 HP
High-pressure for gas, air, flue gases and combustion products HP /2 HP 5.04 Printed in Germany Rösler Druck Edition 06.04 Nr. 241 654 1 6 Technical description The pressure is an adjustable pressure for
Pressure switch, high adjustability of switch differential
switch, high adjustability of switch differential For the process industry Model PSM-700, with robust aluminium case WIKA data sheet PV 35.05 Applications Pumps for process applications (e.g. water treatment,
Level Limit Switch liquiphant FTL 365 / FTL 366
Technical Information TI 86F/00/en Level Limit Switch liquiphant FTL 65 / FTL 66 Level limit switch Liquiphant II with vibrating probe. For all types of liquid. With explosionproof housing for use in hazardous
Fieldbus Segment Protector F2-SP-IC* Features. Assembly. Function. Connection. Zone 2 Div. 2
Fieldbus Segment Protector Features Assembly 4... 10 outputs Ex ic (FISCO or Entity) or non-incendive (Div 2) Advanced fault isolation at the spur Segment Protector in Zone 2/Div. 2 Instruments in Zone
Control Equipment. ATHEX bvba Tel: +32 (0) Fax: +32 (0) Alpenroosbaan 2, 2900 Schoten, België
Control Equipment 01616E00 Position switches are used to monitor the position of moving parts of machines and plant. Can be used in safety circuits, as the device satisfies EN 60 947-5-1/DIN VDE 0660 part
OPTISWITCH 4000/5000. Vibration level switches for liquids
OPTISWITCH 4000/5000 Technical Datasheet Vibration level switches for liquids Operates up to 250 C / 480 F and 64 bar / 925 psi Pump dry-run detection High reliability due to permanent fault monitoring
Flygt /181. Parts List
Flygt 057.09/8 Parts List Table of Contents Table of Contents Introduction... Purpose of this manual... Disclaimer... Data for ordering spare parts... Specially approved products... Qualification of personnel...
600/700 SERIES FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS
FLANGED VALVES PENTAIR CLEAN AIR SYSTEMS CONSTRUCTION FEATURES VALVE Cover Body Pilot Diaphragm Bolts and screws Diaphragm backing disk Diaphragm spring Diecast aluminium (anodised) Diecast aluminium (anodised)
HERION SERIES Indirect solenoid actuated soft seal
HERION 9700 SERIES Indirect solenoid actuated soft seal spool valves with NAMUR interface /, 5/ - G/ For single and double acting actuators Crossover-free switching, switchover function guaranteed even
Operating Instructions. VEGASWING 61, 63 with oscillator SW E60N (EX)
Operating Instructions VEGASWING 61, 63 with oscillator SW E60N (EX) Contents Contents Safety information... 2 Note Ex area... 2 1 Product description... 3 2 Function and application... 4 2.1 Principle
Gas-actuated thermometer with switch contacts Model 73, stainless steel version
Mechatronic temperature measurement Gas-actuated thermometer with switch contacts Model 73, stainless steel version WIKA data sheet TV 27.01 for further approvals see page 12 Applications Control and regulation
TORRIX Magnetostrictive level sensor
TORRIX Magnetostrictive level sensor Precision Versatility Security Sensors & Systems Worldwide: www.fafnir.com FAFNIR Quality and Satisfaction Company: Based in Hamburg, Germany, FAFNIR GmbH has over
Air operated Pinch Valves Connection options:
Air operated Pinch Valves Connection options: Flange Connection Internal Thread Connection Tri-Clamp Connection Weld-on ends RJT Connection AKO Innovative Pinch Valve Technology The valve solution for
The Mobrey product range provides reliable point level detection in a variety of dry solid applications
Product Data Sheet June 2015 IP400, Rev DG Mobrey Dry Products Level Measurement and Control The Mobrey product range provides reliable point level detection in a variety of dry solid applications The
JUMO dtrans p02. Pressure transmitter. General application. Approvals/marks of conformity. Data Sheet Page 1/6. II 1/2G Ex ia IIC T6 Ga/Gb
sales@jumo.co.uk info@jumo.us Data Sheet 404385 Page 1/6 JUMO dtrans p02 Pressure transmitter II 1/2G Ex ia IIC T6 Ga/Gb General application The pressure transmitter Type JUMO dtrans p02 is used to measure