DATA SHEET. D-2011/05/ Date: 05/11. Type TSA6 CNG. Inline breakaway coupling. for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY.
|
|
|
- Phillip Green
- 5 years ago
- Views:
Transcription
1 DATA SHEET D-2011/05/ Date: 05/11 Type TSA6 CNG Inline breakaway coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY.
2 DatA SHEET General Description Breakaway receptacle Eccentric actuator coupling body Features Re-usable without factory reservicing Installation inbetween the filling and venting hoses Small compact design Rubber impact protection Eccentric actuation via an allen wrench Option: without gas recirculation Gas recirculation Rubber impact protection With type TSA6 CNG, an inline breakaway coupling which is installed inbetween the filling and venting hoses, is now also available for bus and truck fuelling stations. In the event of accidental deployment, e.g. driving a vehicle from the dispenser with the nozzle remaining in the vehicle fuel port, the coupling will separate the connections between dispenser and hoses sealing both ends. This protects largely the receptacle, the fuelling nozzle and the dispenser against damage. The detached coupling can be easily reattached and placed back in service after having been function tested. The breakaway device consists of a coupling body, a receptacle and an optional gas recirculation. We recommend the installation of a type TSF5 CNG filter when using the TSA6 CNG inline breakaway coupling. The filter protects your system from dirt ingress. We also offer complete hose assemblies consisting of a fuelling nozzle, a hose set and a breakaway coupling (for complete hose assemblies see data sheet of the respective fuelling nozzle). Application Inline breakaway coupling for bus and truck fuelling stations for installation inbetween the filling and venting hoses. TECHNICAL DATA Characteristic Basic version Options Nominal bore DN 12 mm On request Pressure range PN = 200 bar (3000 psi) PS = 300 bar PT = 450 bar PN = 250 bar (3600 psi) PS = 350 bar PT = 525 bar Temperature range -40 C up to +85 C (-40 F up to +185 F) On request Breakaway force N On request Material Corrosion resistant stainless steel, aluminium On request Sealing material Natural gas compatible On request Design With gas recirculation Without gas recirculation Registration PED97/23/EC: CE0036 Page 2 D-2011/05/
3 DATA Sheet Ordering Ordering Inline breakaway coupling TSA6 CNG with gas recirculation approx. dimensions (mm) C1 C2 30 Ø 35 B2 Ø 49 Ø 74 Ø 54 B1 239 Part No. Description Pressure (PN) B1/B2 C1/C2 C TSA6 CNG 200 bar / 3000 psi C TSA6 CNG 250 bar / 3600 psi C TSA6 CNG 200 bar / 3000 psi UNF 9/16-18* UNF 9/16-18* UNF 7/16-20* Ordering Inline breakaway coupling TSA6 CNG without gas recirculation approx. dimensions (mm) ** ** Ø 35 B2 Ø 54 B1 Ø 49 Ø 75 Part No. Description Pressure (PN) B1/B2 C TSA6 CNG 200 bar / 3000 psi C TSA6 CNG 250 bar / 3600 psi C TSA6 CNG 200 bar / 3000 psi UN 1 1/16-12* ** length depending on type of breakaway coupling D-2011/05/ Page 3
4 DatA SHEET Ordering Accessories The following accessories are available for type TSA6 CNG: Filter TSF5 CNG (50 micron) For upgrading existing inline breakaways without integrated filter, we recommend the installation of a type TSF5 CNG filter. The filter protects your system from dirt ingress. Type TSF5 CNG is installed as prefilter in the media inlet between inline breakaway coupling and filling hose. Part No. Description DN Pressure (PN) Inlet B Outlet A C TSF5 CNG (CE) bar / 3000 psi internal thread Filling and venting hoses Please see data sheet of the filling and venting hoses or of the corresponding fuelling nozzles for filling and venting hoses suitable for the type TSA6 CNG inline breakaway coupling. Fittings Stainless steel fittings for connecting the media inlet B to the filling hose or the gas recirculation inlet C to the venting hose. Part No. Description Connection breakaway Connection filling hose C Fitting UNF 9/16-18* internal thread UNF 9/16-18* internal thread C Fitting UNF 9/16-18* internal thread UNF 9/16-18 ** internal thread E80-647P Fitting UNF 9/16-18* internal thread C Fitting UNF 9/16-18* internal thread UNF 3/4-16* C Fitting UNF 9/16-18* internal thread NPT 1/4 internal thread C Fitting internal thread UNF 9/16-18* C Fitting internal thread UNF 7/16-20* C Fitting internal thread NPT 1/4 ** acc. to SAE J1926 Spare parts Various parts are available as spares for type TSA6 CNG: Part No. Description C Receptacle insert for type TSA6 CNG with gas recirculation C Receptacle insert for type TSA6 CNG without gas recirculation Page 4 D-2011/05/
5 DATA Sheet Other products Other products Our current NGV catalogue also features other fuelling nozzles as well as receptacles, check valves, breakaway couplings etc. Further information on our homepage Contacting For queries and further information, please do not hesitate to contact us. Manufacturer: WEH GmbH Gas Technology Josef-Henle-Str Illertissen / Germany Phone: Fax: ngvsales@weh.com All rights reserved, WEH GmbH Any unauthorized use is strictly forbidden. Subject to alteration. No liability will be assumed for any content. Herewith previous versions are no longer valid. D-2011/05/ Page 5
Data sheet. D-2011/05/ Date: 02/2013. Type TSA6 CNG. Inline breakaway Coupling. for bus and truck fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA6 CNG Inline breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description Receptacle insert Eccentric actuator
DatA sheet. D-2011/05/ Date: 02/2013. Type TSA2 CNG. Inline breakaway Coupling. for car fuelling stations FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSA2 CNG Inline breakaway Coupling for car fuelling stations FUTURE. TECHNOLOGY. TODAY. DATA sheet General Description Receptacle insert Eccentric actuator
DATA SHEET. D-2014/03/ Date: 05/2014. Type TSA2 H 2. WEH Inline Breakaway Coupling. for car fuelling stations. WEH - We Engineer Hightech
D-2014/03/00016-0-3 Date: 05/2014 Type TSA2 H 2 WEH Inline Breakaway Coupling for car fuelling stations WEH - We Engineer Hightech General DESCRIPTION Receptacle insert Eccentric actuator coupling body
DATA SHEET. D-2011/05/ Date: 05/11. Type TSA1 CNG. Breakaway coupling. for car fuelling stations FUTURE. TECHNOLOGY. TODAY.
DATA SHEET D-2011/05/00160-0-3 Date: 05/11 Type Breakaway coupling for car fuelling stations FUTURE. TECHNOLOGY. TODAY. Type Breakaway coupling for car fuelling stations DatA SHEET General Breakaway receptacle
Data sheet. D-2011/05/ Date: 02/2013. Type TSA5 CNG. Breakaway Coupling. for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY.
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type Breakaway Coupling for bus and truck fuelling stations FUTURE. TECHNOLOGY. TODAY. General Receptacle insert Eccentric actuator coupling body Features Re-usable
Data sheet. D-2011/05/ Date: 02/2013. Type TK16 CNG. CNG Fuelling Nozzle. for cars at self-service fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TK16 CNG CNG Fuelling Nozzle for cars at self-service fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description 1 Impact protection 2 Actuation
Data sheet. D-2011/05/ Date: 07/2013. Type TK4 CNG. CNG Fuelling Nozzle. for cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK4 CNG CNG Fuelling Nozzle for cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with receptacles acc.
Data sheet. D-2011/05/ Date: 07/2013. Type TK1 CNG. CNG Fuelling Nozzle. for time filling of cars. WEH - We Engineer Hightech
Data sheet D-2011/05/00160-4-3 Date: 07/2013 Type TK1 CNG CNG Fuelling Nozzle for time filling of cars WEH - We Engineer Hightech General Description Sliding sleeve Media inlet Features Compatible with
DatA sheet. D-2011/05/ Date: 02/2013. Type TK10 CNG. CNG Fuelling Nozzle. for cars FUTURE. TECHNOLOGY. TODAY.
DatA sheet D-2011/05/00160-3-3 Date: 02/2013 Type CNG Fuelling Nozzle for cars FUTURE. TECHNOLOGY. TODAY. Type Fuelling nozzle for cars General Description Ball valve Sliding sleeve 1 Hand grip TK4 CNG
Data sheet. D-2011/05/ Date: 02/2013. Type TN1 CNG. Receptacle. for refuelling of cars with CNG FUTURE. TECHNOLOGY. TODAY.
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TN1 CNG Receptacle for refuelling of cars with CNG FUTURE. TECHNOLOGY. TODAY. General Description Features Compatible with fuelling nozzles acc. to NGV1
High-Flow. Type TK16 H 2. WEH - We Engineer Hightech WEH H 2. Fuelling Nozzle with Data Interface DATA SHEET
D-2014/03/00016-0-3 Date: 05/2014 Type TK16 H 2 High-Flow WEH H 2 Fuelling Nozzle with Data Interface for buses and trucks at self-service fuelling stations WEH - We Engineer Hightech Type TK16 H 2 General
Type TSF2 CNG FUTURE. TECHNOLOGY. TODAY. Coalescing Filter. Data sheet. for installation onboard CNG vehicles and in fuelling stations
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TSF2 CNG Coalescing Filter for installation onboard CNG vehicles and in fuelling stations FUTURE. TECHNOLOGY. TODAY. General Description Features Fine
Data sheet. D-2011/05/ Date: 02/2013. Type TS50 CNG. Fuelling System. for installation in cars FUTURE. TECHNOLOGY. TODAY.
Data sheet D-2011/05/00160-3-3 Date: 02/2013 Type TS50 CNG Fuelling System for installation in cars FUTURE. TECHNOLOGY. TODAY. General Description Features Integrated WEH TN1 CNG receptacle (NGV1) with
70 MPa. Type TK17 H 2. WEH - We Engineer Hightech WEH H 2. Fuelling Nozzle with exchangeable data interface (ENR) DATA SHEET
D-2014/10/00022-0-3 Date: 07/2015 Type TK17 H 2 70 MPa WEH H 2 Fuelling Nozzle with exchangeable data interface (ENR) for cars at self-service fuelling stations WEH - We Engineer Hightech General DESCRIPTION
Refuelling High-Performance Components for Hydrogen Vehicles and Fuelling Stations
Catalogue 50 H 2 Refuelling High-Performance Components for Hydrogen Vehicles and Fuelling Stations Fuelling technology for hydrogen Date: 05/2014 WEH - We Engineer Hightech All rights reserved, WEH GmbH
2018 CNG Refueling High-Performance Components for Natural Gas Vehicles and Fueling Stations
2018 CNG Refueling High-Performance Components for Natural Gas Vehicles and Fueling Stations Fueling technology for natural gas Catalog 15 Date: 03/2018 WEH - We Engineer Hightech All rights reserved,
WEH CNG FUELING SOLUTIONS
FUELING TECHNOLOGY»» WEH CNG FUELING SOLUTIONS PRODUCT OVERVIEW 2014 Products for safe and easy CNG vehicle refueling WEH We Engineer Hightech OVERVIEW» WEH CNG Fueling Products Nozzles, Breakaways, Receptacles,
Brief Overview 2018 WEH CNG Fuelling Solutions Products for safe and easy CNG vehicle refuelling WEH Q UA LIT Y. since 1973
Brief Overview 2018 WEH CNG Fuelling Solutions Products for safe and easy CNG vehicle refuelling ORIGINAL WEH Q UA LIT Y since 1973 OVERVIEW» WEH CNG Fuelling Products Nozzles, receptacles, breakaways,
Type TW02. WEH - We Engineer Hightech. WEH Connector for pressure and vacuum testing DATA SHEET
D-2011/09/00027-10-3 Date: 01/2017 Type TW02 WEH Connector for pressure and vacuum testing of straight tubes, hoses and components with bead or collar WEH - We Engineer Hightech General DESCRIPTION Features
Type TW17 FUTURE. TECHNOLOGY. TODAY. WEH Connector for pressure and function testing. DatA Sheet. on components with internal thread
Dat Sheet D-2011/09/00027-2-3 Date: 01/2013 Type TW17 WEH Connector for pressure and function testing on components with internal thread FUTURE. TECHNOLOGY. TODY. General Description Features Connection
2018 High Performance Check Valves for liquid and gaseous media
2018 High Performance Check Valves for liquid and gaseous media Check valves Catalogue 45 Date: 04/2018 WEH - We Engineer Hightech All rights reserved, WEH GmbH 2018. Unauthorized copies are strictly forbidden
Valve technology for the gas industry Date: 04/2013
Catalog 55 High pressure valves TV17 for inert gases up to 6,000 psi (420 bar) Valve technology for the gas industry Date: 04/2013 FUTURE. TECHNOLOGY. TODAY. All rights reserved, WEH GmbH 2013. Unauthorized
Brief Overview 2018 WEH CONNECTOR SOLUTIONS for pressure-tight connections in seconds WEH Q UA LIT Y. since 1973
Brief Overview 2018 WEH CONNECTOR SOLUTIONS for pressure-tight connections in seconds ORIGINAL WEH Q UA LIT Y since 1973 WEH Quick Connectors for pressure and function testing, filling and plugging Internal
Connection solutions for industrial applications Date: 07/2014
Catalogue 35 WEH Connectors Pressure-tight connections in seconds to threads, beads, tubes, etc. Connection solutions for industrial applications Date: 07/2014 WEH - We Engineer Hightech ll rights reserved,
(FLB-1000 & FLB-5000)
INSTALLATION INSTRUCTIONS FOR QUALIFIED TECHNICIANS FOR CNG FILL- LINE BREAKAWAY DEVICES (FLB-1000 & FLB-5000) 207943 JULY 2014, REV C ANSI/1AS NGV 4.4-1999 CSA 12.54-M99 FOR USE WITH ANY CERTIFIED ELECTRICALLY
3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
u Rubber Dust Cap Standard protective dust caps are supplied with all receptacles.
L SERIES OPW L Series NGV-certified fueling receptacles are designed for use on medium storage natural gas vehicles, including automobiles, light trucks, shuttle buses and vans. Features u High-Flow Capacity
Catalogue Contents. International, Inc. Company ACIRCOR. Introduction - Product Selector. Alternative Fuels Catalogue. Dome Loaded Spring Loaded
HALE HAMILTON Excellence in Pressure & Flow Control ACIRCOR International, Inc. Company Catalogue Contents Introduction - Product Selector Alternative Fuels Catalogue Products for CNG Fuelling Stations
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Remote Process Actuation Control System AirLINE - Siemens ET 200S
Remote Process Actuation Control System AirLINE - Siemens ET 200S Type 8644 can be combined with... Fully compatible with Siemens ET 200S Combination of Fieldbus, pilot valves and I/O modules High flexibility
Build the future, prepare for LNG
LNG Liquefied Natural Gas is the efficient new green fuel Build the future, prepare for LNG Manufacturing safe and innovative quality products Your LNG partner: LNG Vent Connections Male Quick Disconnect
T R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU
T R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU The manufacturer declares that: Pfeiffer Chemie-Armaturenbau GmbH, 47906 Kempen, Germany Butterfly valves BR14a, BR14b, BR14b-Type
Remote Process Actuation Control System AirLINE - Rockwell 1734 Point I/O System
Remote Process Actuation Control System AirLINE - Rockwell 1734 Type 8644 can be combined with... Fully compatible with Rockwell 1734 Point I/O System Combination of Fieldbus, pilot valves and I/O modules
3/2-way and 2 x 3/2-way Rocker Solenoid Valve for pneumatics
65 /-way and x /-way Rocker Solenoid Valve for pneumatics Type 65 can be combined with... Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Fast response times Space
ILB-5. u Easy Installation - the in-line breakaway has SAE-10 O-ring fittings for easy installation in line between the dispenser and nozzle.
H 2 Materials Body: Stainless steel Internal Components: Stainless steel Seals: Specially formulated polymers and elastomers specific to high-pressure NGV applications. In-Line Breakaway () - Heavy-Duty
CNG Receptacles L SERIES. Features. Listings and Certifications
L SERIES OPW L Series NGV-certified fueling receptacles are designed for use on medium storage natural gas vehicles, including automobiles, light trucks, shuttle buses and vans. Features u High-Flow Capacity
Section: D Alternative Fuel
Section: D Alternative Fuel aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding C Alternative Fuel Table of Contents Alternative
Series 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
Worcester 18/19 Series. Modular Multi-Way Ball Valves
Worcester 18/19 Series Modular Multi-Way Ball Valves The Modular Approach To Flexibility 2 Flowserve Worcester's modular Series 18/19 multi-way valve addresses the need for diverting media through a number
Ball Valves 15i, 17i, 18i, 16 and 26
Ball Valves i, 7i, 8i, and 2 CERTIFIED CE 3 ISO 9 FEATURES Ergonomic design Encapsulated bolting Various seal sets, connections and accessories Standardised VATACO spare parts Easy to fit actuator and
NGV refuelling connections Refuelling
NGV refuelling connections Refuelling Stäubli NGV refuelling connections Comprehensive range of NGV 1 compatible products for the refuelling of all kinds of Compressed Natural Gas vehicles in a safe environment
Table of contents. Valves 141. Check valves 142. with threaded connector 142. with ISO-flange connection (SAE) 144
Table of contents Valves 4 Check valves 4 with threaded connector 4 with ISO-flange connection (SAE) 44 for manifold mounting 48 Needle valves 5 with threaded connector 5 for manifold mounting 5 for manifold
Technical Information Cleanfit CPA451
TI00343C/07/EN/13.14 71266614 Products Solutions Services Technical Information Manually operated retractable assembly for water, wastewater and process media Application Industrial and communal waste
u High-Flow - the flow path has been matched to provide ample flow for all NGV-1 Type 1 and Type 2 nozzles.
H 2 In-Line Breakaway ( & ILB-H) Designed for medium flow and automotive NGV and hydrogen refueling applications. This unit will function consistently, independent of the inlet pressure. Materials Body:
Off-line Oil Filter Module Pi 8400
Off-line Oil Filter Module Pi 8400 Volume flow l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
Air operated Pinch Valve type VMC
Air operated Pinch Valve type VMC Flange Internal Thread Tri-Clamp Weld-on ends Threaded spigot The flexible modular system for detachable and aseptic piping connections! The ideal solution for isolation
Quality Parts and Services PARTS CATALOG
Quality Parts and Services PARTS CATALOG 2017 TABLE OF CONTENTS FITTINGS... 1 TUBE FITTINGS... 6 TUBE TO MALE PIPE... 6 TUBE TO FEMALE PIPE... 7 TUBE TO TUBE UNION... 8 TUBE CONNECTORS/ADAPTERS... 9 DUOLOK
Positive displacement flowmeter for continuous flow measurement
8070 Positive displacement flowmeter for continuous flow measurement High accuracy Medium with high viscosity Mounting and dismounting of the electronics by a quarter-turn Connection to Bürkert devices
High Pressure Filter Pi 4000
High Pressure Filter Pi 4000 Nominal pressure 400 bar (5690 psi), nominal size up to 400 according DIN 24550 1. Features High performance filters for modern hydraulic systems Modular system Compact design
T R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU
T R A N S L A T I O N Declaration of Conformity as per Directive 2014/68/EU The manufacturer declares that: Pfeiffer Chemie-Armaturenbau GmbH, 47906 Kempen, Germany PFA/PTFE-lined ball valves BR20a, BR20b,
Declaration of Conformity as per Directive 97/23/EC
Declaration of Conformity as per Directive 97/23/EC The manufacturer declares that:, 47906 Kempen, Germany PTFE-lined Rotary plug valves Series 23e, with packing with lever for 90 operation with worm gear
Macro LNG automotive_last Update January 17 th 2017
Macro LNG automotive_last Update January 17 th 2017 1 1 6 LNG VENT CONNECTIONS Part Number Description Flow capacity 14000 Male Quick Disconnect Vent Metric in US 10 GPM 12895 Male Quick Disconnect Vent
R677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
CNG FUEL SYSTEM PARTS CATALOG
CNG FUEL SYSTEM PARTS CATALOG Worthingtonfuelsystems.com WORTHINGTON FUEL SYSTEM OVERVIEW WHY WORTHINGTON? Worthington Industries is a leading global manufacturer of pressure cylinders and related products
FLOW CONTROL VALVES A5-1 PN# / / ACC
FLOW CONTROL VLVES Flow Control Valves The HYDC family of flow control valves permit safe, simple and repeatable control of hydraulic fluids at operating pressures to psi. The standard slotted control
OPW CLEANE NERGY F UELING P RODUCTS
O NE C OMPANY. O NE WORLD. O NE S OURCE. CLEANENERGY FUELING PRODUCTS OPW CLEANE NERGY F UELING P RODUCTS CNG FUELING PRODUCTS HYDROGEN FUELING PRODUCTS CEFP VERSION 3 PRINTED 4/06 TABLE OF CONTENTS CNG
OPTIFLUX 2000 Quick Start
OPTIFLUX 2000 Quick Start Electromagnetic flow sensor The documentation is only complete when used in combination with the relevant documentation for the signal converter. KROHNE CONTENTS OPTIFLUX 2000
SERIES SF2-500 SUCTION FILTER. Flow rates to 225 gpm
SERIES SF2-5 SUTION FILTER Flow rates to 225 gpm D e s c r i p t i o n 5 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 225 gpm and filtration from
CNG Products. Receptacles, Ball & Check Valves Filters, Tube Fittings. ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested
www.hy-lok.com Catalog No. H-CNG100 April 2014 CNG Products Receptacles, all & Check Valves Filters, Tube Fittings ECE R110 & AGA / CGA NGV Compliant for NGV application. 100% factory tested 2007, 2014
with electric actuators Feedwater control valve with pump spill back DN
ARI-STEVI 453 with electric actuators Feedwater control valve with pump spill back DN 25-100 ARI-STEVI 453 Electric actuator ARI-PREMIO 2,2-15 kn ARI-PREMIO-Plus 2G 2,2-15 kn Enclosure IP 65 2 torque switches
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ /-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 434 µpos, GEMÜ 435 epos
Data Sheet * * Differential pressure - Measuring device Pressure levels PN40/PN100. Important features. Application scopes
*09005393* DB_EN_DA03_GK_HL Rev.B 09/13 *09005393* d e v e l o p i n g s o l u t i o n s DA03 Data Sheet Differential pressure - Measuring device Pressure levels PN40/PN100 The differential pressure -
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
Duplex Filter Pi 3700
MAHLE Industrialfiltration is now Filtration Group. For more information, visit www.filtrationgroup.com Duplex Filter Pi 3700 Nominal pressure 0/250/315 bar (2900/36/4570 psi), nominal size up to 400 according
Valve Blocks. For direct flanging to pressure and differential pressure transmitters. Drop-forging housing. Replaceable valve seat
Data Sheet 10/14-5.32-EN Valve Blocks For direct flanging to pressure and differential pressure transmitters Drop-forging housing Replaceable valve seat Valve stem with back-flow seal and crimped valve
Instrumentation Products F Series Manifolds and Multi-Way Cocks
Instrumentation Products F Series Manifolds and Multi-Way Cocks Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World s Leading Manufacturers of Instrumentation
Series 20 Axial Piston Pumps. Technical Information
Series 20 Axial Piston Pumps Technical Information General Description INTRODUCTION Sauer-Danfoss a world leader in hydraulic power systems has developed a family of axial piston pumps. DESCRIPTION Sauer-Danfoss
Safety Shut-Off Valve HON 711
Product information serving the gas industry worldwide Applications, characteristics, technical data Applications Safety device in gas pressure regulating stations Applicable for use with natural gas according
Angle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
Oil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
Oil Filter Module Pi 8300
Oil Filter Module Pi 8300 Volume flow 1 und 220 l/min 1. Features Compact, ready-to connect oil filter module for modern hydraulic and lubrication systems Low noise internal gear pump Minimum loss of performance
* * Data sheet DA A (ATEX) Differential pressure measuring device for potentially explosive areas
09015062 DB_EN_DA10_ATEX Rev. ST4-A 03/18 *09015062* Data sheet DA10... 0A (ATEX) Differential pressure measuring device for potentially explosive areas Gas explosion protection Zone 1 and 2, gases and
WATERFLUX 3070 Quick Start
WATERFLUX 3070 Quick Start Battery powered electromagnetic water meter Electronic Revision ER 4.3.0_ up to ER 4.3.4_ (SW.REV 4.2.2_ up to 4.2.5_) KROHNE CONTENTS WATERFLUX 3070 1 Safety instructions 4
Medium Pressure Filter Pi 3000
Medium Pressure Filter Pi 3000 Nominal pressure /315 bar (3040/4570 psi), nominal size up to 400 according to DIN 24550 1. Features High performance filters for modern hydraulic systems Provided for pipe
3/2-way and 2 x 3/2-way Solenoid Valve for pneumatics
654 3/-way and x 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Fast response times Space saving ( x 3/-way version) Type 654 can be combined with...
IGATEC - Standard - Swivel Joints
IGATEC - Standard - Swivel Joints Type LW Swivel Joints with Welding Connection Swivel Joints with Threaded Connection Swivel Joints for Loading Arms Swivel Joints for Food and Pharmaceuticals IGATEC International
Angle Seat Globe Valve, Metal
Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a robust low maintenance aluminium actuator. The valve spindle is sealed by a self-adjusting gland packing providing
Replacement cartridge filter
Replacement cartridge filter RE 426/0. /2 Type 7 SL 0 to 260; 7 SLS 90 to 260; SL 0 to 80 D Size 7 SL: 0 to 260 7 SLS: 90 to 260 SL: 0 to 80 D Nominal pressure 7 and/or bar Port up to G /4, SAE /2 (000
3:1 MOBILE LUBE PACKAGES (55 gal)
3:1 MOBILE LUBE PACKAGES (55 gal) Dolly-mounted oil dispenser kits with digital metered valve and 3:1 pumps. Available with or without hose reel. The ideal combinations for dispensing oil in any workplace.
3/2-Way Valve DN 15 up to DN 40
3/-Way Valve 78 DN up to DN Pneumatically operated 3/-way valve for the control of neutral and slightly aggressive media. (Stainless steel version, Data sheet Type 78) ompact design Unaffected by lightly
Angle Seat Control Valve 7020
Angle Seat Control Valve 72 DN 8 up to DN 8 PN 4 Pneumatically operated control valves for neutral through to highly aggressive media. Integrated positioner Compact design All parts contacting the fluid
Change-Over Inline Filter RFLD Weld Version
Change-Over Inline Filter RFLD Weld Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The fi lter housings are designed
Duplex Filter Pi Features. Nominal pressure 10/16 bar (140/230 psi), nominal size 1250 up to 8000
Duplex Filter Pi 281 Nominal pressure / bar (140/230 psi), nominal size 1 up to 8000 1. Features _ High performance filters for modern hydraulic systems Modular system Compact design Minimal pressure drop
The right choice for your application. Pressure sensors from ifm.
The right choice for your application. Pressure sensors from ifm. Process sensors www.ifm.com/gb/pressure Systems for pressure monitoring. The optimum solution for every requirement. Pressure sensors with
Low / Medium Pressure Duplex Filter Inline mounting. Type : 40/160-LD/LDN. Filters. Accumulators. Hydraulic Symbol. Technical Data
Filters. Accumulators Low / Medium Pressure Duplex Filter Inline mounting Type : 0/60LD/LDN Hydraulic Symbol Technical Data Material of Construction Head : GGG50. Bowl : Carbon Steel. Seals : Nitrile /
High Purity PVDF/PP Valves and Flowmeters
High Purity PVDF/PP Valves and Flowmeters Product overview and technical data VALVES, MEASUREMENT AND CONTROL SYSTEMS Quality is important for us Your reliable partner Since 1988, GEMÜ has been an Industry
Change-Over Inline Filter RFLD Welded Version
Change-Over Inline Filter RFLD Welded Version up to 15000 l/min, up to 16 bar RFLD 1300 CAS to RFLD 15000 CBW 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The filter housings are designed
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
Easy Riser swing check valve Models E-1 & F-1
Page 1 of 7 1. DESCRIPTION The Viking Easy Riser Swing Check Valve is a general purpose rubber-faced approved for use in fire service systems. The valve is for use in wet system risers, preaction system
High Pressure Filter Pi 420
High Pressure Filter Pi 4 Nominal pressure 400 bar (5690 psi), nominal size up to 450 optional reverse flow valve 1. Features High performance filters for modern hydraulic systems Modular system Compact
3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
Type 3320, Service Manual. Serviceanleitung Service Manuel
Electromotive 2/2-way valve Elektromotorisches 2/2-Wege-Ventil Vanne électromotorisée à 2/2 voies Service Manual Serviceanleitung Service Manuel We reserve the right to make technical changes without notice.
3/2-Way Valve DN 15 up to DN 50
/-Way Valve 78 DN up to DN Pneumatically operated /-way valve in stainless steel for the control of neutral, slightly aggressive and highly aggressive media. compact design Unaffected by lightly contaminated
Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B
Data sheet Servo-operated 2/2-way solenoid valves with isolating diaphragm Type EV222B EV222B is an indirect servo-operated solenoid valve programme for use in connection with contaminated or aggressive
GENO -MX 1" - MX DN 100 backwash filter. Intended use. Scope of supply. Function. Structure
Subject to modifications TD2-AM001en_004 Edition June 2017 GENO -MX 1" - MX DN 100 backwash filter Intended use The GENO -MXA backwash filters are suitable for the following sectors: Filtration of drinking
Features More than 30 years of expertise has gone into the design and manufacture of Todo-Matic range of Dry-Break couplings.
Features Applications: Road / Rail tanker loading / discharge ISO retrofit & new build IBC containers Offshore rig supply Pharmaceutical processing Vapor Recovery Ship to shore / ship / rig transfer Ship
Stainless Steel Air-Vane Motors
Screwdriving technology Automation Air motors Air tools Stainless Steel Air-Vane Motors up to 1.2 kw / 1.6 Hp corrosion free oilfree sealed The DEPRAG line of air motors merges an attractive cost to power
Angle Seat Globe Control Valve, Metal
Angle Seat Globe Control Valve, Metal Construction The GEMÜ 2/2-way angle seat globe control valve is designed for demanding flow control applications. It can be paired with the GEMÜ 1434 µpos, GEMÜ 1435
Suction Filter SF/SFM/SFF and Suction Filter Elements S/S..
Suction Filter /M/F and Suction Filter Elements S/S.. up to 500 l/min Filters: 60 110 160 240 330 M 330 F 400 F 500 Elements: S SH. SU. SG. 1. TECHNICAL SPECIFICATIONS 1.1 FILTER HOUSING Construction The