MUSTANG GT
|
|
- Godfrey Price
- 5 years ago
- Views:
Transcription
1 MAXFLOW FUEL PUMP BOOSTER Installation Instructions MUSTANG GT P/N: 5A * Legal in California only for racing vehicles which may never be used or registered or licensed for use upon a highway. ENGINEERING, INC Pacific Avenue, Channel Islands, CA Phone (805) Fax: (805) M-F 7:00 AM - 3:30 PM (PST) DP/N: v1.2 10/28/2018
2 FOREWORD All information, illustrations and specifications contained herein are based on the latest product information available at the time of this publication. Changes to the manual may be made at any time without notice. Contact Vortech Engineering for any additional information regarding this kit and any of these modifications at (805) :00am-3:30pm PST. STOP Take note of the following before proceeding: 1. Proper installation of this accessory requires general automotive mechanic knowledge and experience. Please browse through each step of this instruction manual prior to beginning the installation to determine if you should refer the job to a professional installer/technician. Please contact your dealer or Vortech Engineering for possible installers in your area. 2. This product was designed for use on stock (un-modified, OEM) vehicles. The PCM (computer), engine, transmission, drive axle ratios and tire O.D. must be stock. If the vehicle or engine has been modified in any way, check with Vortech prior to installation and use of this product. 3. Use only premium grade fuel with a minimum of 91 octane (R+M/2). 4. Always listen for any sign of detonatlion (knocking/pinging) and discontinue hard use (no boost) until the problem is resolved. 5. Vortech is not responsible for any clutch, transmission, drive-line or engine damage. Exclusions from Vortech warranty coverage considerations include, but not limited to: 1. Neglect, abuse, lack of maintenance, abnormal operation or improper installation. 2. Continued operation with an impaired vehicle or sub-system. 3. The combined use of Vortech components with other modifications such as, but not limited to, exhaust headers, aftermarket camshafts, nitrous oxide, third party PCM programming or other such changes VORTECH ENGINEERING, INC All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, or translated into another language in any form, by any means without written permission of Vortech Engineering, Inc. DP/N: v1.2, ii
3 TABLE OF CONTENTS FOREWORD...ii TABLE OF CONTENTS iii TOOL & SUPPLY REQUIREMENTS... iv PARTS LIST... v 1. PREPARATION AND REMOVAL FUEL PUMP BOOSTER INSTALLATION INTERIOR RE-ASSEMBLY FINAL CHECK....9 iii DP/N: v1.1,
4 Vortech FUEL PUMP BOOSTER Installation Instructions MUSTANG GT Before beginning this installation, please read through this entire instruction booklet The Vortech Mustang GT Fuel Pump Booster (FPB) upgrade was designed specifically for use on Ford Mustang GT vehicles equipped with a turbocharger, supercharger or nitrous oxide, to support applications with increased horsepower over the basic kit. As with any power enhancing product, this unit is intended for use on healthy, well-maintained engines. Vortech Engineering is not responsible for engine damage. Installation on new vehicles will not harm or adversely affect the break-in period so long as factory break-in procedures are followed. For best performance and continued durability, please take a note of the following key points: 1. Use only premium grade fuel 91 octane or higher (R+M/2). 2. Always listen for any sign of detonation (pinging) and discontinue hard use (no boost) until problem is resolved. TOOL & SUPPLY REQUIREMENTS: Interior Panel Removal Tools Drill Motor #4 or 7/32" Drill Bit 1/4" Drive Ratchet 1/4" Drive Extension 1/4" Drive 3/8" Socket 1/4" Drive 10mm Socket 5/32 Allen Key DP/N: v1.2, iv
5 FUEL PUMP BOOSTER UPGRADE MUSTANG GT PARTS LIST Part No. 5A IMPORTANT: Before beginning installation, verify that all parts are included in the kit. Report any shortages or damaged parts immediately. PART NO. DESCRIPTION QTY INSTR, 15-'18 MUST GT, PNP FPVB UPGRD BOX, CARDBOARD, PUMP BOOSTER INSERT, CARDBOARD, PUMP BOOSTER 1 4FQ A MNTG PLT, 15 MUST GT, FPVB VOLT BOOSTER, PNP, STD, VORT LOGO 1 1 5W HARNESS, FPVB, PNP, MUST GT 1 7C X.50 SHCS GR8 PLT 4 7E #14 X.75 HEX HD SHEETMETAL SCREW 2 7F NYLOCK NUT 4 7J WASHER, #10 FLAT, ZN PLT 4 7U TIE WRAP, 7.5" NYLON 5 v DP/N: v1.1,
6 This page was left intentionally blank. DP/N: v1.2, vi
7 1. PREPARATION AND REMOVAL NOTE: The provided mounting bracket for the fuel pump booster is not compatible with convertible vehicles at this time. Please consult your local fabricator for a custom solution. A. Prior to unplugging the battery, you will need to roll down both windows. This is done to prevent potential window damage as both windows rest within a channel in the body of the vehicle when they are rolled up. (See Fig. 1-a) Fig. 1-a: Roll Down Windows B. Remove the battery cover and unplug both battery leads. (See Fig. 1-b) Fig. 1-b: Unplug Battery Leads C. In order to access the fuel pump driver module, it will be ncessary to remove the lower rear seat cushion. There are two retainers located underneath the front bolsters that secure the lower rear seat cushion to the vehicle. (See Fig. 1-c) LOWER REAR SEAT CUSHION RETAINER LOCATION (LOCATED UNDERNEATH) Fig. 1-c: Rear Seat Retainer Location 1 DP/N: v1.1,
8 1. PREPARATION AND REMOVAL, cont'd D. In order to release the lower rear seat cushion from the vehicle, press the retainer lever inwards then pull the lower rear seat cushion upwards. (See Fig. 1-d) PUSH RETAINER LEVER INWARDS Fig. 1-d: Rear Seat Retainer E. Located near the driver side rear interior panel is the fuel pump driver module. Unplug the electrical connector at this time. (See Fig. 1-e) Fig. 1-e: Unplug Fuel Pump Driver Module F. Locate the upper rear seat release strap and fold the upper rear seat down. (See Fig. 1-f) UPPER REAR SEAT RELEASE STRAP Fig. 1-f: Fold Upper Rear Seat Down DP/N: v1.2,
9 1. PREPARATION AND REMOVAL, cont'd G. Detach the rear seatbelt guide from the driver side rear interior panel. The seatbelt passes through the rear seatbelt guide, so it can remain in the vehicle. (See Fig. 1-g) Fig. 1-g: Detach Small Plastic Trim H. Remove the interior panel directly above the driver side door sill by pulling it upwards, releasing the retainer clips. (See Fig. 1-h) Fig. 1-h: Remove Interior Panel Above Driver Side Door Sill I. The driver side rear interior panel needs to be removed. To remove, pull from the top of the panel and pull away from the window. Work your way around the panel to release all of the retaining clips. (See Fig. 1-i) Fig. 1-i: Remove Driver Side Rear Interior Panel 3 DP/N: v1.1,
10 1. PREPARATION AND REMOVAL, cont'd J. Locate the driver side rear interior panel & lay it down as shown. There is a foam insulation block that needs to be removed to make space for the fuel pump booster. (See Fig. 1-j) Fig. 1-j: Foam Insulation Block K. Remove the two metal clips securing the insulation block. Discard the insulation block and two metal clips as they will not be reused. (See Fig. 1-k) REMOVE 2x METAL CLIPS Fig. 1-k: Remove Foam Insulation Block DP/N: v1.2,
11 2. FUEL PUMP BOOSTER INSTALLATION A. Located near the driver side seatbelt assembly is a flat surface where the fuel pump booster will be mounted. Using the fuel pump booster mounting plate as a template, mark your drill holes. Align the edge of the fuel pump booster mounting plate with the edge of the flat mounting surface. Mark the two mounting holes, then center punch the marks. Using a #4 drill bit, drill out the two mounting hole marks. Be sure to use a sharp drill bit. (See Fig. 2-a) NOTE: Although a #4 drill bit is optimal for this step, you can subsitute it with a 7/32" drill bit if necessary. Fig. 2-b: Mark & Drill Mounting Holes B. Attach the fuel pump booster to the mounting plate using the supplied four x.50 socket head screws, four nylock nuts, and four #10 flat washers. Install the assembly to the vehicle and secure using the two provided #14 hex head self-tapping screws. (See Fig. 2-b) Fig. 2-b: Mount Fuel Pump Booster C. Locate the provided fuel pump booster adapter harness and install it in-line between the OEM fuel pump driver module and main vehicle harness. Connect the fuel pump booster to the fuel pump booster adapter harness. (See Fig. 2-c) Fig. 2-c: Install Adapter Harness 5 DP/N: v1.1,
12 2. FUEL PUMP BOOSTER INSTALLATION, cont'd D. The brown wire on this fuel pump booster will not be used. Tape the open end of the wire shut, then tape it to the black ground wire. (See Fig. 2-d) Fig. 2-d: Brown Wire (Unused) E Model-Year Vehicles: Using a 10mm socket, Remove the ground screw on the right side of the OEM fuel pump driver module. Locate the black ground wire with the ring terminal from the fuel pump booster and ground it to the same location as the OEM fuel pump driver module. Resecure using the previously removed screw. (See Fig. 2-e) Fig. 2-e: Model-Year Ground Wire Location F Model-Year Vehicles: Using an 8mm socket, remove the ground screw located on the driver side 'B' pillar. Locate the black ground wire with the ring terminal from the fuel pump booster and ground it as shown. Resecure using the previously removed screw. (See Fig. 2-f) FUEL PUMP BOOSTER GROUND WIRE ATTACH GROUND WIRE HERE Fig. 2-f: 2018 Model-Year Ground Wire Location DP/N: v1.2,
13 3. INTERIOR RE-ASSEMBLY A. Reinstall the driver side rear interior panel. Reinstall the rear seatbelt guide to the driver side rear interior panel. Test fit the lower rear seat cushion and check clearance between the underside of the rear seat cushion and the adapter harness. Proceed to reinstall the lower rear seat cushion. (See Fig. 3-a) Fig. 3-a: Reinstall Driver Side Rear Interior Panel B. Reinstall the interior panel directly above the driver side door sill. Once all panels are reinstalled, proceed to reconnect the battery. (See Fig. 3-b) Fig. 3-b: Reinstall Interior Panel Above Driver Side Door Sill 7 DP/N: v1.1,
14 This page was left intentionally blank. DP/N: v1.2,
15 4. FINAL CHECK WARNING: Do not attempt to operate the vehicle until all components are installed and all operations are completed including the final check. A. Confirm that all connections are properly insulated and secure from creating any shorts. Make sure all wires are properly secure with clamps or tie-wraps. B. Make sure all wires are routed away from hot, moving or sharp objects. C. Use a wide band O2 sensor to verify a proper air/fuel ratio (Vortech suggests 11.0:1 for 91 octane pump fuel.) Check ignition timing to make sure it is properly set before commencing test drive. D. Keep in mind that this manual does not address air/fuel or ignition timing considerations. E. Test drive the vehicle. F. Always listen carefully for engine detonation. Discontinue heavy throttle usage if detonation is heard. 9 DP/N: v1.1,
16 ENGINEERING, INC Pacific Avenue, Channel Islands, CA Phone Fax: M-F 7:00 AM - 3:30 PM (PST) DP/N: v1.2 10/28/2018
MUSTANG GT
MAXFLOW FUEL PUMP BOOSTER Installation Instructions 2011-2012 MUSTANG GT P/N: 5A102-029 ENGINEERING, INC. 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone 805 247-0226 Fax: 805 247-0669 www.vortechsuperchargers.com
More informationUNIVERSAL FIT. P/N's: 5A , 5A and 5A ENGINEERING, INC.
MAXFLOW FUEL PUMP BOOSTER Wiring Instructions UNIVERSAL FIT P/N's: 5A002-030, 5A102-030 and 5A102-033 ENGINEERING, INC. 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone 805 247-0226 Fax: 805 247-0669
More informationVortech Charge Air Cooler
NOT ALL BOOST I S C R E AT E D E Q U A L Vortech Charge Air Cooler Installation Instructions 2013-2014 Ford Focus ST* P/N: 8N310-020 * Legal in California only for racing vehicles which may never be used
More informationVortech Charge Air Cooler
Vortech Charge Air Cooler Installation Instructions 2013-2014 Ford F-150 EcoBoost P/N: 8N310-010 ENGINEERING, INC. 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone 805 247-0226 Fax: 805 247-0669
More information2010 CAMARO COG DRIVE UPGRADE Installation Instructions
2010 CAMARO COG DRIVE UPGRADE Installation Instructions 2010 CAMARO SS (LS3 & L99) P/N: 4GE118-010, 4GE118-020, 4GE118-030 ENGINEERING, LLC 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone 805
More informationVortech Charge Air Cooler
Vortech Charge Air Cooler Installation Instructions 2015 Ford Mustang 2.3L EcoBoost P/N: 8N310-040 ENGINEERING, INC. 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone 805 247-0226 Fax: 805 247-0669
More informationPaxton Automotive Charge Cooler Upgrade for Driver Side Supercharger Mount Small Block Ford Carbureted*
Owner s Installation Guide for the Paxton Automotive Charge Cooler Upgrade for Driver Side Supercharger Mount Small Block Ford Carbureted* *Legal in California only for racing vehicles which may never
More information8-Rib Drive Upgrade. Installation Instructions Ford 5.0L Mustang GT P/N: 4FQ , 4FQ , 4FQ SUPERCHARGERS
8-Rib Drive Upgrade Installation Instructions 2011-2015 Ford 5.0L Mustang GT P/N: 4FQ116-001, 4FQ116-003, 4FQ116-005 SUPERCHARGERS 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone: 805 247-0226
More information8-Rib Drive Upgrade Installation Instructions
8-Rib Drive Upgrade Installation Instructions 2000-2004 Ford 4.6 Mustang GT P/N: 4FL116-001 ENGINEERING, INC 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone: 805 247-0226 Fax: 805 247-0669 www.vortechsuperchargers.com
More information8-Rib Drive Upgrade. Installation Instructions Ford 4.6 Mustang GT (3 Valve) ENGINEERING, LLC P/N: 4FU
8-Rib Drive Upgrade Installation Instructions 2005-2009 Ford 4.6 Mustang GT (3 Valve) P/N: 4FU116-001 ENGINEERING, LLC 1650 Pacific Avenue, Channel Islands, CA 93033-9901 Phone: 805 247-0226 Fax: 805 247-0669
More informationChevrolet Camaro SS
10-Rib Drive Upgrade Installation Instructions 2016-2017 Chevrolet Camaro SS P/N: 4GT116-001, 4GT116-002 * Legal in California only for racing vehicles which may never be used or registered or licensed
More informationFord 4.0L Explorer/Ranger
Ford 4.0L Explorer/Ranger Supercharger System Installation Instructions FORD EXPLORER 1991-1994 MODEL YEARS FORD RANGER 1990-1994 MODEL YEARS 50 STATE SMOG LEGAL AS PER CARB EO #D-213-17 ENGINEERING, LLC
More informationMaxflow Power Cooler Installation Instructions
Maxflow Power Cooler Installation Instructions 1999-2001 Ford 4.6 Mustang COBRA (4 Valve) P/N: 8N301-050 CARB EO #D-213-15 VORTECH ENGINEERING, LLC 1650 PACIFIC AVENUE CHANNEL ISLANDS, CA 93033-9901 805
More informationMaxflow Power Cooler Ford 6.8L Super Duty Part #8N /138 CARB E.O. #D Installation Instructions ENGINEERING, LLC
Maxflow Power Cooler Installation Instructions 1999-2001 Ford 6.8L Super Duty Part #8N301-130/138 CARB E.O. #D-213-15 ENGINEERING, LLC 1650 PACIFIC AVENUE CHANNEL ISLANDS, CA 93033-9901 (805) 247-0226
More informationMaxflow Power Cooler Installation Instructions
Maxflow Power Cooler Installation Instructions 1997-2003 Ford 5.4 F-150/Expedition P/N: 8N301-300/308 VORTECH ENGINEERING, LLC 1650 PACIFIC AVENUE CHANNEL ISLANDS, CA 93033-9901 805 247-0226 FAX: 805 247-0669
More informationUniversal GM LSX. Supercharger Tuner Kit Installation Instructions
Universal GM LSX Supercharger Tuner Kit Installation Instructions Legal in California only for racing vehicles which may never be used upon a highway. ENGINEERING, LLC 1650 Pacific Avenue, Channel Islands
More informationMaxflow Power Cooler
Maxflow Power Cooler Installation Instructions 1996-1998 Ford 4.6 Mustang Cobra (4 Valve) P/N: 8N301-040 CARB EO #D-213-15 This product may not be legal for use on public roads in all 50 states. P/N: 8N020-040
More informationNissan Titan
2004-2006 Nissan Titan Supercharger System Installation Instructions 50 State Smog Legal Per CARB EO #D-213-25 ENGINEERING, LLC 1650 Pacific Avenue, Channel Islands CA 93033-9901 Phone: 805 247-0226 Fax:
More informationChevrolet Camaro SS. Supercharger System Installation Instructions Model Year*
I S C R E AT E D E Q U A L Chevrolet Camaro SS NOT ALL BOOST Supercharger System Installation Instructions 2016 Model Year* *Legal in California only for racing vehicles which may never be used or registered
More informationMaxflow Power Cooler. Installation Instructions Ford Mustang V6* I S C R E AT E D E Q U A L
NOT ALL BOOST I S C R E AT E D E Q U A L Maxflow Power Cooler Installation Instructions 2005-2008 Ford Mustang V6* P/N: 8N301-320, 8N301-340 * Legal in California only for racing vehicles which may never
More information10-RIB BELT SYSTEM UPGRADE INSTALLATION MANUAL
10-RIB BELT SYSTEM UPGRADE INSTALLATION MANUAL 2011-2017 AND UP FORD MUSTANG GT 5.0L COYOTE WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 WWW.WHIPPLESUPERCHARGERS.COM
More informationToyota 4RUNNER With/MR Overhead Video
Toyota 4RUNNER With/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit-00110-14, Beige 00016-00120; Fit Kit-00120-14, Gray Accessory Code: ED7 Conflicts: Vehicles without a sunroof Kit Contents:
More informationHeader Installation for Ford Mustang GT, PN-17290* Adaptor Pipe PN-60566*
Header Installation for Ford Mustang GT, PN-17290* Adaptor Pipe PN-60566* These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please read this
More informationROUSH Active IO Exhaust. Installation Instructions P/N: (R LITE) Fastback GT Convertible GT V8
Installation Instructions P/N: 422128 (R1318-5231LITE) Fastback GT Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active IO Exhaust Installation Instructions P/N: 422128
More informationINSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1 DESCRIPTION: Trailer Tow Harness 2 APPLICATION: Nissan Rogue 3 PART NUMBER: 999T8 G2000 4 KIT CONTENTS: 999T8 G2000 Item Qty. Part Description Service Part Number
More informationConflicts: Vehicles with a sunroof
Toyota 4Runner Non/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit -00110-15, Beige 00016-00120; Fit Kit -00120-15, Gray Accessory Code: ED6 Conflicts: Vehicles with a sunroof Kit Contents:
More informationGM 4.8/5.3/6.0L Light Truck
GM 4.8/5.3/6.0L Light Truck Supercharger System Installation Instructions 1999-2002 Model Years* *Legal in California only for racing vehicles which may never be used upon a highway. ENGINEERING, LLC 1650
More informationadvanced FLOW engineering Instruction Manual P/N: E Make: FORD Model: SUPER DUTY F-250/350 Year: Engine: V8-6.7L (td) POWER STROKE
advanced FLOW engineering Instruction Manual P/N: 51-81872-E Make: FORD Model: SUPER DUTY F-250/350 Year: 2011-2016 Engine: V8-6.7L (td) POWER STROKE Please read the entire instruction manual before proceeding.
More informationROUSH FUEL SYSTEM UPGRADE CURRENT FORD MUSTANG 5.0L
ROUSH FUEL SYSTEM UPGRADE 2011- CURRENT FORD MUSTANG 5.0L P/N: 421602 (1313-FPVRKIT) Installation Instructions Before installing your ROUSH Performance Product(s), read through the entire installation
More information10-rib belt system upgrade Installation Manual
10-rib belt system upgrade Installation Manual 2011-2017 and up Ford MUSTANG gt 5.0l coyote WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 A color PDF of
More informationadvanced FLOW engineering Instruction Manual P/N: / Make: Ford Model: Mustang GT Year: Engine: V8-5.0L
advanced FLOW engineering Instruction Manual P/N: 51-73203 / 54-73203 Make: Ford Model: Mustang GT Year: 2015-2017 Engine: V8-5.0L Please read the entire instruction manual before proceeding. Ensure all
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory REMOTE ENGINE STARTER SYSTEM Application 2010 CIVIC 4-DOOR Publications No. AII 42460 Issue Date AUG 2009 PARTS LIST Remote Engine Starter Unit Kit P/N 08E91-E22-100B
More informationHeader Installation for Ford Mustang GT, PN-17290* Adaptor Pipe PN-60566**
Header Installation for Ford Mustang GT, PN-17290* Adaptor Pipe PN-60566** These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please read this
More informationOwner smanual. Banks Ram-Air Super-Scoop Chevy/GMC Pickups. with Installation Instructions
Owner smanual with Installation Instructions Banks Ram-Air Super-Scoop 2007-2013 Chevy/GMC Pickups THIS MANUAL IS FOR USE WITH SYSTEM 42235, 42236 & 42237 Gale Banks Engineering 546 Duggan Avenue Azusa,
More informationPRELIMINARY INSTALLATION INSTRUCTIONS. Remote Engine Starter Attachment Kit P/N 08E92-SNA-100B
INSTALLATION INSTRUCTIONS Accessory Application Publications No. REMOTE ENGINE STARTER SYSTEM 2008 CIVIC 2-DOOR AII 38215 Issue Date OCT 2007 PARTS LIST Remote Engine Starter Unit Kit P/N 08E91-E22-100B
More informationChevrolet Camaro (Gen6) Installation Guide Long Tube Header PN 17293*
BORLA PERFORMANCE INDUSTRIES Chevrolet Camaro (Gen6) Installation Guide Long Tube Header PN 17293* ***** Please compare the parts in the box with the bill of materials provided ***** (view the following
More informationFord 5.4 3V F-150. Supercharger System Installation Instructions Model Year. 50 State Smog Legal per CARB EO #D ENGINEERING, LLC
Ford 5.4 3V F-150 Supercharger System Installation Instructions 2004-2007 Model Year 50 State Smog Legal per CARB EO #D-213-25 ENGINEERING, LLC 1650 Pacific Avenue, Channel Islands CA 93033-9901 Phone:
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. REAR VIEW CAMERA ATTACHMENT PILOT AII 23620 Issue Date MAY 2002 PARTS LIST Attachment Kit : P/N 08B21-S9V-100 Control unit harness Rear
More informationadvanced FLOW engineering Instruction Manual P/N: / / Make: Toyota Model: Tacoma Year: Engine: V6-4.
advanced FLOW engineering Instruction Manual P/N: 51-76012 / 54-76012 / 75-76012 Make: Toyota Model: Tacoma Year: 2012-2015 Engine: V6-4.0L Please read the entire instruction manual before proceeding.
More informationRANGER 900 POWER STEERING KIT
RANGER 900 POWER STEERING KIT P/N 2880083 APPLICATION MY14 AND NEWER RANGER XP 900 MODELS IMPORTANT It is strongly recommended that this kit be installed by an authorized Polaris dealer. NOTE Use of this
More informationECO-SERIES REAR BUMPER FORD F150 PART # FD-2962
15-16 FORD F150 PART # FD-2962 Body Armor 4x4 272 Corporate Terrace St. Corona, CA 92879 951-808-0750 Customer Service hours: M-TH: 7:30am to 4:30 PM Pacific Time Friday: 8 AM Noon Pacific Time PARTS LIST:
More informationEdelbrock Victor II Intake Manifold. For Chrysler 5.7L (Eagle), 6.1L and 6.4L Gen III HEMI Engines Part #7179
For Chrysler 5.7L (Eagle), 6.1L and 6.4L Gen III HEMI Engines PLEASE study these instructions carefully before beginning this installation. You should be familiar with and comfortable working on your
More information2017 Current Ford SuperDuty Adaptive Cruise Control Relocation Bracket Installation Instructions
2017 Current Ford SuperDuty Adaptive Cruise Control Relocation Bracket Installation Instructions PREPARATION 1. Disconnect the negative terminal on the battery. Park the vehicle on level ground and set
More informationFord 5.0L Mustang GT
Ford 5.0L Mustang GT Supercharger System Installation Instructions 2015 Model Year* *Legal in California for racing vehicles which may never be used upon a highway. ENGINEERING, INC 1650 Pacific Avenue,
More information½ DODGE CUMMINS
15 June 2016 #1050305D 2003-2004½ Dodge Cummins FlowMAX Lift Pump Kit (I-00169) - 1-2003-04½ DODGE CUMMINS BD FLOWMAX LIFT PUMP KIT Installation Instructions P/N# 1050305D PLEASE READ ALL INSTRUCTIONS
More information½ DODGE CUMMINS
19 October 2012 2003-04½ Dodge Cummins FlowMAX Lift Pump Kit # 1050305B - 1-2003-04½ DODGE CUMMINS BD FlowMax LIFT PUMP KIT Installation Instructions P/N# 1050305B PLEASE READ ALL INSTRUCTIONS CAREFULLY
More informationRear Vision System Tailgate Emblem Camera Aftermarket Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number )
Rear Vision System Tailgate Emblem Camera Aftermarket Display 2009-Current Ford F-150 and 2010-Current Super Duty (Kit part number 1008-6509) Kit Contents: Tailgate Emblem Mount with Camera Chassis Harness
More informationSALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT
= SALEEN SPEEDLAB BOOST AND WATER TEMPERATURE GAUGE POD KIT INSTALLATION MANUAL: 2005-09 Mustang 4.6L 3V P/N: 10-8002-C12000B KIT P/N: 10-2903-B11511* Saleen Performance, Inc. 1225 East Maple Rd. Troy,
More information2015 Ford F150 Rear Bumper w/ LED
2015 Ford F150 Bumper w/ LED T527990 T527991 PARTS LIST: 1 Bumper Assembly 4 12mm Lock Washers 2 Mounting Brackets 6 12 mm Nylon Lock Nuts 4 Sensor Hole Plugs 8 4mm x 10mm Button Head Bolts 2 Plastic Plugs
More informationMustang CLASSIC LIGHT BAR INSTALLATION INSTRUCTIONS CDC #
1990-1993 Mustang CLASSIC LIGHT BAR INSTALLATION INSTRUCTIONS CDC # 101000 Kit Components: 1 Light Bar 4 Bolts ( 5 / 16-18 x 2.5 ) #182010 4 Washer #182005 4 Shims #182009 2 Dark Blue Connectors #182004
More informationFord 5.0L Mustang Supercharger System Installation Instructions
Ford 5.0L Mustang Supercharger System Installation Instructions 1994-1995 MODEL YEARS 50 SMOG STATE LEGAL PER CARB EO #D-213-17 ENGINEERING, LLC 1650 PACIFIC AVENUE CHANNEL ISLANDS, CA 93033-9901 (805)
More informationF L Ecoboost V F L Ecoboost V6 Performance Pac Level 2 Installation Instructions P/N: (1115TT-PWRPK2)
2015-2016 F-150 3.5L Ecoboost V6 2015-2017 F-150 2.7L Ecoboost V6 Performance Pac Level 2 Installation Instructions P/N: 422007 (1115TT-PWRPK2) 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH 2015-2016
More informationTOYOTA im INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT922-12170 Kit Contents Item # Quantity Reqd. Description 1 1 Main Wire Harness 2 1 Switch 3 1 Switch Header 4 1 ECU 5 1 ECU Bracket 6 1 Hardware Kit 7 1 Instruction Card 8 1
More informationFord 5.0L Mustang GT
I S C R E AT E D E Q U A L NOT ALL BOOST Ford 5.0L Mustang GT Supercharger System Installation Instructions 2015-2016 Model Year* *Legal in California for racing vehicles which may never be used upon a
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationConflicts: Vehicles without a sunroof Vehicles with a single sunroof
Toyota Sienna (Dual Sunroof) 2011-10.2 Overhead Video Part Number: 00016-00110 00016-00110-17 Fit Kit 00016-00120 00016-00120-17 Fit Kit Accessory Code: ED5 Conflicts: Vehicles without a sunroof Vehicles
More informationSCION xb HEADREST DVD RSE Section I Installation Preparation. Part Number: PT
Section I Installation Preparation Part Number: PT900-52080 Kit Contents Item # Quantity Reqd. Description 1 2 DVD Headrest Unit 2 2 Headrest Extension Cables 3 1 Audio Interface Module 4 1 Audio Interface
More informationINSTALLATION INSTRUCTIONS ELEVATION REAR BUMPER FORD F150
INSTALLATION INSTRUCTIONS PARTS LIST: 1 Elevation Bumper Assembly 2 Plastic Plugs (license plate mount) 6 12-1.75mm x 50mm Hex Bolts 8 4mm x 10mm Socket Head Screws 12 12mm x 37mm OD x 3mm Flat Washers
More informationadvanced FLOW engineering Instruction Manual P/N: & Make: Ford Model: F-150 Year: Transmission: 6R80
advanced FLOW engineering Instruction Manual P/N: 46-70170 & 46-70172 Make: Ford Model: F-150 Year: 2009-2015 Transmission: 6R80 Please read the entire instruction manual before proceeding. Ensure all
More informationInstallation Instructions 2019 Chevy and GMC 1500 Rear Bumper Product Number: E4050, E4051 Application: Chevy and GMC 1500 Trucks
IMPORTANT SAFETY GUIDE Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided the following warnings, safety precautions, installation
More informationROUSH Active Exhaust. Installation Instructions P/N: (R AVC) Fastback GT V8 - Convertible GT V8
Installation Instructions P/N: 422100 (R1318-5231AVC) Fastback GT V8 - Convertible GT V8 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH ROUSH Active Exhaust Installation Instructions P/N: 422100
More informationOfficial Powerdyne Model BD Supercharger and Kit Limited Warranty
Official Powerdyne Model BD Supercharger and Kit Limited Warranty Powerdyne Automotive Products Inc. warrants your new Powerdyne model BD Supercharger and installation kit to be free of defects in workmanship
More informationInstallation Instructions for Lingenfelter GM 2500 Suburban & Yukon XL Auxiliary Fan System (with ECM controlled fan output)
Installation Instructions for Lingenfelter 2007-2013 GM 2500 Suburban & Yukon XL Auxiliary Fan System (with ECM controlled fan output) PN L300090607 Revision - 1.1 Lingenfelter Performance Engineering
More informationM-9603-CJ 123 mm Cold Air Kit for 5.4L 4V V8 Cobra Jet Mustang INSTALLATION INSTRUCTIONS
Please contact the Techline for the most current instruction information 1-800-367-3788.!!! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION!!! OVERVIEW: This kit is designed for
More information½ DODGE CUMMINS
7 April 2009 2003-04½ Dodge Cummins FlowMAX Lift Pump Kit # 1050305-1 - 2003-04½ DODGE CUMMINS BD FlowMax LIFT PUMP KIT Installation Instructions P/N# 1050305 PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
More information* * APPLICABLE MODELS: 2014 > Mazda 3
PART NUMBER: 0000 8C L48 (DIO) / 0000 89 L84 (PIO) GENUINE ACCESSORIES INSTALLATION INSTRUCTIONS Rev. AAA *550-0700-000* APPLICABLE MODELS: 2014 > Mazda 3 REQUIRED COMPONENTS: ITEM QTY DESCRIPTION Usage
More informationSCION XB SUBWOOFER ENCLOSURE Preparation
Preparation Part Number: Kit Contents Item # Quantity Reqd. Description 1 1 Subwoofer enclosure 2 1 Wire Harness 3 1 Paper Template 4 1 Plastic Drill Template 5 1 Hardware Bag Hardware Bag Contents 1 Item
More informationLong Tube Header Installation For Ford Mustang GT
Long Tube Header Installation For 2005-2008 Ford Mustang GT Precision manufactured using aircraft quality T-304 stainless steel; this system is designed to endure years of heavy use. Installing a Borla
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. ATTACHMENT (EX-L WITH NAVI) 2008 RIDGELINE AII 36587 Issue Date MAY 2007 PARTS LIST Attachment Kit P/N: 08B21-SJC-102 Template Rear camera
More informationInstallation Manual. AutoSteer. Gleaner Combine. AutoGuide 2 Steer Ready. Supported Models A66 A76 R66 R76 S67 S77 PN: A
Installation Manual AutoSteer Gleaner Combine AutoGuide 2 Steer Ready Supported Models A66 A76 R66 R76 S67 S77 PN: 602-0312-01-A LEGAL DISCLAIMER Note: Read and follow ALL Instructions in this manual carefully
More informationINSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063
INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063 PARTS LIST: 1 Grille Guard 2 10-1.5mm Nylon Lock Nuts 1 Driver/Left Frame Mounting Bracket 4 12mm Plastic Washers 1
More informationAEROMOTIVE Part # Subaru Fuel Rails for Top Feed Injectors WRX & STI INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14135 Subaru Fuel Rails for Top Feed Injectors 02-14 WRX & 07-14 STI INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems
More informationROUSH Convertible Stylebar Installation Instructions P/N: (1315-STYLEBAR) Convertible Only
Installation Instructions P/N: 421911 (1315-STYLEBAR) Convertible Only 39555 Schoolcraft Rd, Plymouth MI, 48170 800.59.ROUSH Installation Instructions P/N: 421911 (1315-STYLEBAR) Convertible Only Application:
More informationENGINE ASSEMBLY STOCK TO 250 HP
GM SPORT COMPACT Performance Build Book 25 ENGINE ASSEMBLY STOCK TO 250 HP Fig. 3 The stock ECOTEC engine has proven reliable to 250 hp.(fig. 3) Performance upgrades are available from GM Performance Parts
More informationWire Seat Heater Installation Instructions
COPPER Wire Wire Seat Heater Installation Instructions 1-Seat Coverage 2-Temperature Settings Part# HILO-M1xx HILO-M0xx Document: LIT-MAN-HILO-2 Rev G 2/11/15 Check Corporation 1800 Stephenson Highway
More informationadvanced FLOW engineering Instruction Manual P/N: / /
advanced FLOW engineering Instruction Manual P/N: 50-73002 / 51-73002 / 75-73002 Make: Ford Model: Diesel Trucks Year: 1999.5-2003 Engine: V8-7.3L (td) Please read the entire instruction manual before
More informationOwner smanual. Banks Ram-Air Super-Scoop Chevy/GMC 6.6L Duramax Turbo-Diesel Pickups. with Installation Instructions
with Installation Instructions Owner smanual Banks Ram-Air Super-Scoop 2003-07 Chevy/GMC 6.6L Duramax Turbo-Diesel Pickups THIS MANUAL IS FOR USE WITH KITS 42168 and 42169 Gale Banks Engineering 546 Duggan
More informationInstallation Instructions Ford 4.6 Mustang GT* (3 Valve) P/N: 8N , 8N , 8N , 8N , 8N ENGINEERING, INC.
NOT ALL BOOST I S C R E AT E D E Q U A L Maxflow Power Cooler Installation Instructions 2005-2009 Ford 4.6 Mustang GT* (3 Valve) P/N: 8N301-290, 8N301-330, 8N301-360, 8N301-370, 8N301-380 * Legal in California
More informationInstruction Manual P/N: Make: Nissan Model: 370z Year: Engine: V6-3.7L
Instruction Manual P/N: 12529003 Make: Nissan Model: 370z Year: 2009-2012 Engine: V6-3.7L Please read the entire instruction manual before proceeding. Ensure all components listed are present. If you are
More informationadvanced FLOW engineering Instruction Manual P/N: & Make: Chevrolet/GMC Model: Trucks/SUVs Year: Engine: V8-4.8/5.3/6.
advanced FLOW engineering Instruction Manual P/N: 51-11072 & 54-11072 Make: Chevrolet/GMC Model: Trucks/SUVs Year: 07-08 Engine: V8-4.8/5.3/6.2L Please read the entire instruction manual before proceeding.
More informationAEROMOTIVE Part # Ford 5.4L GT500 Shelby Mustang Fuel Rail Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 14145 07 Ford 5.4L GT500 Shelby Mustang Fuel Rail Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures.
More informationExhaust System Installation for the Mustang GT & Shelby GT500 PN , , , , ,
Exhaust System Installation for the Mustang GT & Shelby GT500 PN 140370, 140371, 140372, 140410, 140411, 140412 These instructions have been written to help you with the installation of your Borla Performance
More informationSAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
More informationadvanced FLOW engineering Instruction Manual P/N: &
advanced FLOW engineering Instruction Manual P/N: 51-11752-1 & 54-11752-1 Make: Chevrolet/GMC Model: Trucks/SUVs Year: 09-12 Engine: V8-4.8/5.3/6.0/6.2L Please read the entire instruction manual before
More informationL/6.7L DODGE CUMMINS
10/19/2012 2005-08 5.9/6.7 Dodge Cummins FlowMAX Lift Pump Kit # 1050310B - 1-2005-09 5.9L/6.7L DODGE CUMMINS BD FLOWMax V2 LIFT PUMP KIT Installation Instructions P/N # 1050310B PLEASE READ ALL INSTRUCTIONS
More informationadvanced FLOW engineering Instruction Manual P/N: F Make: FORD Model: RANGER Year: Engine: L4-2.3L DOHC
advanced FLOW engineering Instruction Manual P/N: F2-03012 Make: FORD Model: RANGER Year: 2004-2011 Engine: L4-2.3L DOHC Please read the entire instruction manual before proceeding. Ensure all components
More informationBuy products from authorized and licensed manufacturers using any of our patented processes, beware of cheap knock-offs, look for our licensing logo.
Part number SP2096 2008-10 Lexus IS-F 5.0L V8 1- Air intake system equipped with MR Tech and Air Fusion 1-5 Injen/AMSOIL (#1046) dry filter w/f1 styleinverted top 1-4 straight hose (#3129) 1-3 1/4 x 3
More informationClassic Light Bar Mustang
Classic Light Bar 2005-2012 Mustang Note: Read installation instructions before starting. Component List: 1 Light Bar Part #110000 1 Driver Side Bracket w/set Screw Part #115003 1 Passenger Side Bracket
More informationFord Mustang GT Long Tube Header Installation
2005-2006 Ford Mustang GT Long Tube Header Installation Precision manufactured using aircraft quality T-304 stainless steel; this system is designed to endure years of heavy use. Installing a Borla Performance
More informationLong Tube Header Installation PNs , 17276
Long Tube Header Installation PNs - 17260, 17276 ***** Please compare the parts in the box with the bill of materials provided ***** to assure that you have all the parts necessary for this installation.
More informationSCION FR-S FOG LIGHTS
Part #: PT413-18130 Conflicts: Lowering Springs PTR07-18130-LL (California only) Kit Contents: For Anniversary Edition, Monogram & RS 2.0 vehicles, additional parts need to be ordered (PT413-18130-LL)
More informationAEROMOTIVE Part # Mustang 5.0L Fuel System Kit INSTALLATION INSTRUCTIONS
AEROMOTIVE Part # 17103 83-93 Mustang 5.0L Fuel System Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair procedures. We recommend
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. CIVIC All 30175-31616 2 AND 4-DOOR P/N 08E10-SNA-100 Issue Date DEC 2005 NOTE: The interior illumination lights cannot be installed on 2-door
More informationadvanced FLOW engineering Air Intake System Product Guide Make: GM Model: Trucks (GMT900) Year: Engine: V8-6.0L P/N: &
advanced FLOW engineering Air Intake System Product Guide Make: GM Model: Trucks (GMT900) Year: 2009-2010 Engine: V8-6.0L P/N: 51-11742 & 54-11742 Please read the entire product guide before proceeding.
More informationECO-SERIES REAR BUMPER FORD F150 (accommodated factory hitch receiver) PART # FD-2962
(accommodated factory hitch receiver) PART # FD-2962 Body Armor 4x4 272 Corporate Terrace St. Corona, CA 92879 951-808-0750 Customer Service hours: M-TH: 7:30am to 4:30 PM Pacific Time Friday: 8 AM Noon
More informationGENUINE PARTS INSTALLATION INSTRUCTIONS
GENUINE PARTS INSTALLATION INSTRUCTIONS 1. 2. 3. 4. DESCRIPTION: APPLICATION: PART NUMBER: KIT CONTENTS: Trailer Hitch Harness Kit Infiniti JX 999T8 YZ000- Trailer Hitch Harness Kit Item QTY Description
More informationMustang GT & BULLITT (2 Valve)
I S C R E AT E D E Q U A L NOT ALL BOOST Ford 4.6L SOHC Mustang GT & BULLITT (2 Valve) Supercharger System Installation Instructions 1996-1999 MODEL YEARS 50 State Smog Legal per CARB EO #D-213-17 2000-2004
More informationINSTALLATION MANUAL: MUSTANG DUAL FUEL PUMP KIT P/N: C14057B
INSTALLATION MANUAL: 05-09 MUSTANG DUAL FUEL PUMP KIT P/N: -8002-C157B Saleen Performance, Inc. 800-888-8945 www.saleen.com STOP IF YOU ARE NOT EXPERIENCED IN THE AREA OF AUTOMOTIVE MECHANICS, WE STRONGLY
More informationINSTALLATION INSTRUCTIONS C-VS-2000-DUR-1 20 VEHICLE SPECIFIC CONSOLE for 2018 Dodge Durango with Standard Shifter
INSTALLATION INSTRUCTIONS C-VS-2000-DUR-1 20 VEHICLE SPECIFIC CONSOLE for 2018 Dodge Durango with Standard Shifter TOOLS REQUIRED: Phillips Screw Driver T-20 Torx bit Standard Socket set 9/64 Allen wrench
More information