SPARE PARTS & TOOLS SAVE TIME AND MONEY WITH FAURE HERMAN SPARE PARTS AND TOOLS
|
|
- Tracy Fields
- 5 years ago
- Views:
Transcription
1 Counting every Drop SPARE PARTS & TOOLS For maximum operational reliability SAVE TIME AND MONEY WITH FAURE HERMAN SPARE PARTS AND TOOLS Faure Herman equipment is engineered for high reliability and performance. To assure the best performance of your meter regular maintenance and recalibration is recommended. Faure Herman offers you a wide range of calibrated cartridge, bearing kit, tools and other spare parts in order to keep your business running. Consider ordering your spare parts today will help reduce your downtime, maintenance time and cost. Contact your local Faure Herman representative to optimize your inventory maintenance schedule. CALIBRATED CARTRIDGE FOR TZN AND TLM Faure Herman TZN and TLM meters utilize a removable calibrated cartridge inserted into the body. The Faure Herman cartridge principle offers: Easy replacement of internals less than 5 min Limited downtime / interruption of service Time and money savings Interchangeable spare cartridges, calibrated with same conditions, for easy maintenance Ability to send only the cartridge for repair/calibration at Faure Herman laboratory Ability to rebuild/refurbish meters with just a few parts A spare cartridge assures you are never more than a few minutes away from having your meter operational again. 1
2 HELICAL TURBINE METER TZN : calibrated cartridge ordering information SEM_TZN STD - J1 - T - H B - D - D / CUS- CUS STD- Standard A- Acids 4 : Fluid type B- Industrial Alcohol C- Demineralized Water D- Sea Water E- Water G- LPG H- Hydrocarbons L- Beverages S- Solvents 1 : Type 2 : Model / Size A / 1/2" E / 1"1/2 K / 8" A / 1/2" E / 1"1/2 K / 8" B / 3/4" E / 1"1/2 L / 10" B / 3/4" F / 2" L / 10" C / 1" F / 2" M / 12" C / 1" F / 2" M / 12" C / 1" G / 3" N / 14" C / 1" G / 3" P / 16" D / 1"1/4 G / 3" P / 16" D / 1"1/4 H / 4" Q / 18" D / 1"1/4 H / 4" Q / 18" D / 1"1/4 J / 6" R / 20" E / 1"1/2 J / 6" E / 1"1/2 K / 8" 3 : Rotor / Internal Material A- Aluminium / SS T- Titanium / SS V- Titanium / Titanium 5 : Nb of product(s) 1-1 product 2-2 products 3-3 products 4-4 products 6 : Nb of points x Run(s) A- 6x1 B- 6x3 C- 6x5 D- 10x1 E- 10x3 F- 10x5 G- 8x5 H- 6x2 7 & 8 : Viscosity in cst (min/max) A- 0.6 J- 5 < V < 10 B- 1 K- 10 < V < 30 C- 1.6 L- 30 < V < 50 D- 5 M- 50 < V < 100 E- < 0.6 N- 100 < V < 200 F- 0.6 < V < 1 P- 200 < V < 350 G- 1 < V < 1.6 Q- 350 < V H- 1.6 < V < 5 9 : Linearity / Repeatability 01- ± 0.15 % / without 12- ± 0.30 % / 0.04 % 02- ± 0.15 % / 0.02 % 13- ± 0.50 % / without 03- ± 0.15 % / 0.04 % 14- ± 0.50 % / 0.02 % 04- ± 0.20 % / without 15- ± 0.50 % / 0.04 % 05- ± 0.20 % / 0.02 % 16- ± 1.00 % / without 06- ± 0.20 % / 0.04 % 17- ± 1.00 % / 0.02 % 07- ± 0.25 % / without 18- ± 1.00 % / 0.04 % 08- ± 0.25 % / 0.02 % 19- ± 0.1 % / without 09- ± 0.25 % / 0.04 % 20- ± 0.1 % / 0.02 % 10- ± 0.30 % / without 21- ± 0.1 % / 0.04 % 11- ± 0.30 % / 0.02 % xx- Other 10 : Calibration method 1- Single K factor 2- Multiple K factors 3- Viscosity Indexing 4- Master Meter 11 : Turndown ratio Defined by Faure Herman based on application 2
3 HELICAL TURBINE METER TLM : calibrated cartridge ordering information SEM_TLM A5 - A - H B - A - D / 1 : Model / Size A / 3" A / 3" A / 3" A / 3" A / 3" B / 4" B / 4" B / 4" B / 4" B / 4" 2 : Rotor / Internal Material A- Aluminium B- Titanium 3 : Fluid type A- Acids B- Industrial Alcohol C- Demineralized Water D- Sea Water E- Water G- LPG H- Hydrocarbons L- Beverages S- Solvents 4 : Nb of product(s) 1-1 product 2-2 products 3-3 products 5 : Nb of points x Run(s) A- 6x1 B- 6x3 6 & 7 : Viscosity in cst (min/max) A- 0.6 F- 0.6 < V < 1 B- 1 G- 1 < V < 1.6 C- 1.6 H- 1.6 < V < 5 D- 5 J- 5 < V < 15 E- < 0.6 X-Other 8 : Linearity / Repeatability 01- ± 0.15 % / without 06- ± 0.25 % / 0.04 % 02- ± 0.15 % / 0.04 % 07- ± 0.30 % / without 03- ± 0.20 % / without 08- ± 0.30 % / 0.04 % 04- ± 0.20 % / 0.04 % xx- Other 05- ± 0.25 % / without 9 : Turndown ratio Defined by Faure Herman based on application 3
4 MECHANICAL PARTS FOR TURBINE METERS : BEARING KIT Bearing kit for TZN 2" Bearing kit for TZN 3" Bearing kit for TZN CUS Bearing kit for TZN BNAE Bearing kit for TCX Turbine Bearing ref Bearing ref Model Type (Carbide) (Graphite) TZN STD TZN STD 16-xxx (1/2") L00019 L00020 TZN STD 20-xxx (3/4") L00021 L00022 TZN STD 25-xxx (1") L00023 L00024 ZN STD 32-xxx (1" 1/4) L00025 L00026 TZN STD 40-xxx (1" 1/2) L00025 L00026 TZN STD 50-xxx (2") L00003 L00027 TZN STD 80-xxx (3") L00028 L00029 TZN STD 100-xxx (4") L00013 L00005 TZN STD 150-xxx (6") L00014 L00006 TZN STD 200-xxx (8") L00009 L00031 TZN STD 250-xxx (10") L00010 L00032 TZN STD 300-xxx (12") L00015 L00007 TZN STD 350-xxx (14") L00016 L00008 TZN STD 400-xxx (16") L TZN STD 450-xxx (18") L TZN CUS TZN CUS 80-xxx (3") TZN CUS 100-xxx (4") TZN CUS 150-xxx (6") TZN CUS 200-xxx (8") TZN CUS 250-xxx (10") TZN CUS 300-xxx (12") TZN CUS 350-xxx (14") TZN CUS 400-xxx (16") TZN CUS 450-xxx (18") TZN BNAE TZN BNAE 16 (1/2") L00019 L00020 TZN BNAE 20 (3/4") L00021 L00022 TZN BNAE 25 (1") L00023 L00024 TZN BNAE 32 (1" 1/4) L00025 L00026 TZN BNAE 50 (2") L00003 L00027 TLM TLM 3-30 / TLM 3-50 (3") L00003 L00027 TLM 3-70 / TLM / TLM (3") L00028 L00029 TLM 4-70 / TLM / TLM (4") L00028 L00029 TLM / TLM (4") L00013 L00005 TCX Gen2 TCX 25-xxx (1") L00056 L00060 TCX 32-xxx (1" 1/4) L00057 L00061 TCX 40-xxx (1" 1/2) L00058 L00062 TCX 50-xxx (2") L00059 L00063 TCX 80-xxx (3") L00036 L00037 TCX 100-xxx (4") L00038 L00039 TCX 150-xxx (6") L00040 L00041 TCX 200-xxx (8") L00042 L00043 TCX 250-xxx (10") L00044 L00045 TCX 300-xxx (12") L00046 L
5 ELECTRICAL SPARE PARTS FOR TURBINE METERS Pick-up coils kit /1 kit kit /1 kit (cable 5m) kit PC Pick-up coil kit Pick-up coil Pick-up coil PC45-25 Preamplifiers FH710 Standard 2 wires FH710 Standard 2 wires sensitive FH710 Namur FH710 Namur sensitive FH710 Open collector Preamplifier FH710 Enclosure parts* UL/cUL Enclosure kit with FH710 standard 2 wires SS UL/cUL Enclosure kit with FH710 Namur sensitive SS UL/cUL Enclosure kit with FH710 open collector SS ATEX/IECEx Enclosure kit for FH boss SS ATEX/IECEx Enclosure kit for 1"NPT FH boss SS "NPT FH boss adapter SS "NPT Thermal extension SS *Consult the factory for enclosure compatibility and certification for your material. UL/cUL enclosure kit certified : Class 1 div 1 Group C&D ATEX/IECEx enclosure kit certified : II2G Ex d IIC T6 Gb UL/cUL Enclosure kit ATEX/IECEx Enclosure kit for FH boss 1"NPT FH boss adapter 1 NPT Thermal extension Retaining ring kit L00035 Small TZN boss block Enclosure cover gasket Enclosure gasket
6 SPARE PARTS FOR ULTRASONIC METER FH8300/FH8400 transducer ( 12") or (>12") FH8500 transducer 1 Mhz (>12") FH8500 transducer 2,25 Mhz ( 12") FH8300 Electronic set FH8400 Electronic set FH8500 Electronic set Infrared Remote control F10101 SPECIFIC TOOLS To assemble the parts, some needed specific tools are defined and can be provided. Wrench for enclosure Tool for coil extraction Tool for coil assembly Tool for coil threaded adapter Tool for PC45-25 coil assembly FH8500 transducer extractor
7 Tool for threaded cartridge assembly Small size TZN STD and TZN BNAE Tool for TLM cartridge assembly Tool for TZN CUS bearing replacement TZN BNAE 16 (1/2") TZN BNAE 20 (3/4") TZN BNAE 25 (1") TZN BNAE 32 (1" 1/4) TZN BNAE 50 (2") TZN BNAE 16 (1/2") TLM 3-30 / TLM 3-50 (3") TLM 3-70 / TLM / TLM (3") TLM 4-70 / TLM / TLM (4") TZN CUS 80 (3") TZN CUS 100 (4") TZN CUS 150 (6") TZN CUS 200 (8") TZN CUS 250 (10") TZN CUS 300 (12") TZN CUS 350 (14") TZN CUS 400 (16") TZN CUS 450 (18") TZN CUS 500 (20") Tool for shaft assembly TZN STD 80 (3") TZN STD 100 (4") TZN STD 150 (6") TZN STD 200 (8") TZN STD 250 (10") TZN STD 300 (12") TZN STD 350 (14") TZN STD 400 (16") TZN STD 450 (18") Tool for TCX threaded crosspiece TCX 80 (3") TCX 100 (4") TCX 150 (6") TCX 200 (8") TCX 250 (10") TCX 300 (12") Other spares are available. Please consult Faure Herman for more information. 7
8 ONLINE SHOP FOR SPARE PARTS & TOOLS Faure Herman offers you a reliable spare parts & tools service. It s available online at any time - the spare parts you need is just a click way. Log on website. CONTACT FAURE HERMAN FOR ALL YOUR METERING NEEDS FAURE HERMAN FAURE HERMAN METER USA FAURE HERMAN DUBAÏ Route de Bonnétable BP La-Ferté-Bernard Cedex FRANCE 4702 North Sam Houston Parkway West Suite 100 Houston, TX (U.S.A) Office #738, Building #6EB Dubai Airport Freezone (DAFZA) Dubaï (U.A.E) Tel : +33 (0) Tel : Tel : Fax : +33 (0) Fax : Fax : fhprojects@idexcorp.com FHH-Sales@idexcorp.com fhsalesme@idexcorp.com This document is not contractual, Faure Herman maintains the right to modify certain characteristics without notice. Ref Spare parts & tools 01/2016 ENERGY & FUELS 8
FH8500. Metering Solution for Custody Transfer Applications. One Step Ahead in Ultrasonic Flowmetering. Main Applications
FH85 Metering Solution for Custody Transfer Applications One Step Ahead in Ultrasonic Flowmetering Main Applications Oil Production & Allocation FSO, FPSO Metering Tanker Off-loading Storage Management
More informationHELIFLU TM TZN. User s Manual
TEC 02-05-01 EN Rev B (08/2017) HELIFLU TM TZN User s Manual FAURE HERMAN Route de Bonnétable BP 20154 72406 La Ferté Bernard Cedex France Tel : +33 (0)2 43 60 28 60 Fax : +33 (0)2 43 60 28 70 E-mail :
More informationHELIFLU TM TZN. User s Manual
HELIFLU TM TZN User s Manual FAURE HERMAN Route de Bonnétable 72400 La Ferté Bernard France Tel : +33 (0)2 43 60 28 60 Fax : +33 (0)2 43 60 28 70 E-mail : sales@faureherman.com FAURE HERMAN METER 8280
More informationHTM Series Helical Turbine Meters
HTM Series Helical Turbine Meters The HTM series of turbine meters is designed for high accuracy volume measurement of crude oils and other liquid hydrocarbons. M&T helical turbine meters are preferred
More informationMV Series. Smith Meter Turbine Meters. Features. Operating Specifications SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 2.0 (2/18)
SPECIFICATIONS MV Series Bulletin SS02016 Issue/Rev. 2.0 (2/18) Smith Meter Turbine Meters The Smith Meter MV Series Turbine Meter is intended for the measurement of crude oils and other products having
More informationMV Series. We put you first. And keep you ahead. SMITH METER TURBINE METERS FEATURES OPERATING SPECIFICATIONS. Bulletin SS02016 Issue/Rev. 1.
SPECIFICATIONS MEASUREMENT SOLUTIONS MV Series Bulletin SS02016 Issue/Rev. 1.7 (9/14) We put you first. And keep you ahead. SMITH METER TURBINE METERS The Smith Meter MV Series Turbine Meter is intended
More informationLiquid Controls. Turbine Meters for Custody Transfer Flow Measurement of Petroleum Products. Loading Terminal, Offshore, and Pipeline Applications
Liquid Controls Turbine Meters for Custody Transfer Flow Measurement of Petroleum Products Loading Terminal, Offshore, and Pipeline Applications Product Overview IN100-10 www.lcmeter.com Premier products,
More informationFlowmeters. The Satam flowmeter range is used for the custody transfer measurement of liquid hydrocarbons, liquid gas and liquid chemicals.
Countum Group Metering Solutions Flowmeters The Satam range is used for the custody transfer measurement of liquid hydrocarbons, liquid gas and liquid chemicals. Consisting of four distinct families, the
More informationProduct Data Sheet. Turbine Flow Meter. QuikSert DESCRIPTION INSTALLATION FEATURES REPAIR KITS
DESCRIPTION Turbine Flow Meter QuikSert The QuikSert in-line turbine flow meter was developed for liquid applications where accuracy and dependability are needed. QuikSert s stainless steel body incorporates
More informationQUALITY INDUSTRIAL FLOWMETERS
QUALITY INDUSTRIAL FLOWMETERS COMPANY PROFILE Trimec Industries is an Australian owned ISO9001:2008 quality certified company specializing in the design and manufacture of a proprietary range of positive
More informationDensitometers L-Dens 427F Ex Density Sensor Specifications
Issue/Rev. 0.1 (2/12) Densitometers L-Dens 427F Ex Density Sensor Specifications Bulletin SS04001E The L-Dens 427F Ex Density Sensor combines an accuracy of 1 x 10-4 g/cm 3 in a compact design. Continuous
More informationRUN ACCUM. TOTAL STOP BAT LOW HIGH
TURBOPULSE TURBINE FLOWMETER INSTRUCTION MANUAL gal RUN ACCUM. TOTAL STOP BAT LOW HIGH RESET > PROGRAM ENTER ACCUM TOTAL ^ RATE TOTAL TP050 TABLE OF CONTENTS 1. INTRODUCTION Overview 1 1.1 Model number
More informationBARTON 7000 Series Liquid Turbine Meters
TECHNICAL SPECIFICATIONS BARTON 7000 Series Liquid Turbine Meters Cameron s BARTON 7000 series turbine meters are designed for a broad range of precise liquid measurement applications. Based on more than
More informationSmith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
More informationTechnical Datasheet. HM R Series. Turbine Flow Meters. with Female Inch Threads
www.kem-kueppers.com info@kem-kueppers.com Technical Datasheet HM R Series Turbine Flow Meters with Female Inch Threads Certified according to DIN EN ISO 9001 2 HM R Series Turbine Flow Meters Description
More information2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65
2/2-way Angle-Seat Valve for medium up to +180 C, threaded port connection, DN 15-65 Type 2000 can be combined with High flow rate Long life cycle NC and NO universal s with modular universal accessory
More informationSentinel LCT. Panametrics Ultrasonic Flowmeter for Liquid Custody Transfer Measurement. GE Measurement & Control. Benefits.
GE Measurement & Control Sentinel LCT Panametrics Ultrasonic Flowmeter for Liquid Custody Transfer Measurement Benefits Extremely reliable and highly accurate flowmeter, designed specifically for custody
More informationFluid Control Solutions. Pumps & Boosters. Petrometalic SA 32, rue de l Ermitage VERSAILLES
Fluid Control Solutions Pumps & Boosters Petrometalic SA 32, rue de l Ermitage 78000 VERSAILLES www.petrometalic.com packers@petrometalic.com SOMMAIRE Hydraulic pump...2 S218GJC... 2 Construction pumps...4
More informationINSTALLATION AND OPERATION
Industrial Type Turbine Flowmeter NT Hygienic Type Turbine Flowmeter BNO Low Flow Pelton Wheel Flowmeter NS INSTALLATION AND OPERATION Nixon Flowmeters Ltd. Leckhampton, Cheltenham, Glos UK Tel. 0044 (0)
More informationHM...TC-R. Turbine Flow Meters for Solvents and Di-Water. Technical Datasheet
www.kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet HM...TC-R Turbine Flow Meters for Solvents and Di-Water HMTC-R_D_E_150128_E003 Application Turbine flow meters serve to accurate
More information2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
More informationCalibration, Fluid Property Effects Reproducibility and Long Term Stability. All in 20 minutes! Dr Gregor Brown Cameron
Calibration, Fluid Property Effects Reproducibility and Long Term Stability. All in 20 minutes! Dr Gregor Brown Cameron Agenda Calibration process Cameron calibration laboratory Reproducibility/calibration
More informationMF SERIES. Mini-Flowmeters for Low Flow Applications USER S MANUAL HP-210. January 2013
MF SERIES Mini-Flowmeters for Low Flow Applications USER S MANUAL January 2010 January 2013 107 Kitty Hawk Lane P.O. Box 2145 Elizabeth City, NC 27909 1-800-628-4584 (252) 331-1997 Fax (252) 331-2886 www.hofferflow.com
More informationBARTON 7400 Precision Gas Turbine Flow Meters
TECHNICAL SPECIFICATIONS BARTON 7400 Precision Gas Turbine Flow Meters BARTON Model 7400 Precision Turbine Flow Meters are designed for gas service in a wide range of industrial, commercial, pipeline and
More informationTurbine flowmeters Series TM
Turbine flowmeters Series TM Suitable for liquids Possibility of installation in all flow directions Special design for high pressure available Excellent relationship flow range / flowmeter size Low pressure
More informationIndustrial OG meter series IOG Inline and flanged oval gear meter
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de badger@badgermeter.de Industrial OG meter series IOG Inline and flanged oval
More informationFlow Sensors & Instruments
STAINESS STEE TURBINE FOWMETERS Serie X IG PRESSURE AND IG TEMPERATURE Principle of Operation The x range of Turbine Flowmeters meet the demand of most liquid measurement applications. They basically consist
More informationTransmitting Transducer. Gas/Air Velocity Range:
RNG Series Insertion-Style Gas Flow Meter The RNG Series meter is an insertion-style vortex shedding flow meter designed to offer high accuracy measurements over an extremely large flow range. The meters
More informationI N S T R U C T I O N M A N U A L
E L E C T R I C L E V E L C O N T R O L S LINC L471 L471SC LV471 L971 SERIES Recognized as a world-class leader in Electric & Pneumatic level control switches, flow indicators, chemical metering pumps,
More informationFlow Research and Test Center
SALES BULLETIN Flow Research and Test Center CREATING RESOURCE TECHNOLOGY FOR TODAY AND TOMORROW The key to FMC Technologies success has been its ability to provide the latest technology in products and
More informationVersaFlow Coriolis 100 Mass Flow Sensor Specifications
VersaFlow Coriolis 100 Mass Flow Sensor Specifications 34-VF-03-09 May 2011 The Universal Solution for the Process Industry VERSAFLOW is the only sensor for mass flow in its class with secondary pressure
More informationSOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4
SOLENOID VALVES no voltage release (tamperproof) manual reset construction 1/4 U 2 1 3 3/2 Series 327 FEATURES The valves are certified according to IEC 61508 Functional Safety data and have SIL-3 capability
More informationOM004, OM006 & OM008 Oval Gear Meter
OM SERIES OM004, OM006 & OM008 Oval Gear Meter OM004 (1/8"), OM006 (1/4") and OM008 (3/8") Oval Gear Meters ACCURACY: ±1.0% OF READING Select Your Body Material: Aluminum or Stainless Steel The OM Small
More informationFLOWX3 F3.20 High Pressure Paddlewheel Flow Sensor MAIN FEATURES APPLICATIONS OPERATING PRINCIPLE
FLOWX3 F3.20 High Pressure Paddlewheel Flow Sensor FlowX3 F3.20 is a paddlewheel flow sensor suitable for system at high pressure and at critical temperature. F3.20 is designed for use with every kind
More informationLevel Limit Switch liquiphant FTL 365 / FTL 366
Technical Information TI 86F/00/en Level Limit Switch liquiphant FTL 65 / FTL 66 Level limit switch Liquiphant II with vibrating probe. For all types of liquid. With explosionproof housing for use in hazardous
More information7829 Visconic industrial viscosity transmitter on line real time viscosity measurement
process measurement solutions 7829 Visconic industrial viscosity transmitter on line real time viscosity measurement IP7001 w On-line real time viscosity measurement w Hazardous area approvals w 4-20mA
More information7000 Series OPTIMASS Mass Flowmeters. Titanium Hastelloy Stainless Steel
KROHNE 04/2004 7.02445.24.00 GR 7000 Series OPTIMASS Mass Flowmeters with single straight measuring tube Titanium Hastelloy Stainless Steel Status: 10/99 Status: 10/99 One tube no limits No limits with
More informationContinuous Duty Torque Measurement. Directly and accurately measures the power of turbomachinery in the Oil, Gas and Petrochemical industries.
Continuous Duty Torquetronic TM Continuous Duty Torque Measurement. Directly and accurately measures the power of turbomachinery in the Oil, Gas and Petrochemical industries. Measuring steady state torque
More informationOPTIMASS 3000 Technical Datasheet
OPTIMASS 3000 Technical Datasheet Sensor for mass flow First choice for low flow applications Certified secondary pressure containment A common footprint for all three sizes, in Hastelloy or Stainless
More informationTechnical Datasheet. ZHM CT Series. Gear Flow Meters in Cartridge Design.
www.kem-kueppers.com info@kem-kueppers.com Technical Datasheet ZM CT Series Gear Flow Meters in Cartridge Design for paint applications, optimized flushing and weight design Certified zertifiziert according
More informationVersaFlow Vortex 100 Vortex Flow Meter Specifications
VersaFlow Vortex 100 Vortex Flow Meter Specifications 34-VF-03-05 May 2011 The All-In-One Solution The VERSAFLOW is the only vortex flowmeter with integrated and temperature compensation in 2- wire technology.
More informationAn IDEX Water & Wastewater Business. pulsafeeder.com. Non-Metallic External Gear Pump
An IDEX Water & Wastewater Business pulsafeeder.com Non-Metallic External Gear Pump Pulsafeeder Expertise Since 1936, Pulsafeeder has been the global leader in fluid handling technology and innovation
More informationZDM Positive Displacement Flow Meter User Instructions
ZDM Positive Displacement Flow Meter User Instructions USA 1801 Parkway View Drive Pittsburgh, PA 15205 PH 412-788-2830 Canada 9A Aviation Point Claire, QC H9R 4Z2 PH 514-428-8090 www.koboldusa.com ZDM_manual_05/17
More informationLiquid Turbine Flowmeters
NuFlo Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and bearing to withstand
More informationTools, Mechanical. All or Multiple Products. Parts List. Feeler Gauges. Spiders and Bushings. Feeler Gauge Extension Rod. Cam Setting Bushing
Issue/Rev. 0.1 (9/12) All or Multiple Products Tools, Mechanical Parts List Bulletin PO0A001 Spiders and Bushings Feeler Gauges Locates rotor assembly while obtaining blade tip and block clearances on
More informationMeter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
More informationParts Manual EN
Parts Manual PL30-1211 12-11 Series Inline Extended Grinders For additional product information visit our website at http://www.apextoolgroup.com Nomenclature 12 X 1 1 XX - 36 XX OH Tool Series 12 = Ergo
More informationTECHNICAL BULLETIN. Logix 505si Series Digital Positioner. Experience In Motion FCD LGENTB /13
Logix 505si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0505-03 09/13 Experience In Motion Introduction The Logix 505si is a basic positioner for most simple control loops. It is microprocessor
More informationPA - Turbine Flowmeter Range
PA - Turbine Flowmeter Range PA - Turbine Flow Meter Range Our PA - Turbine Flow Meters have a unique open bearing design which allows the measured media to flow freely thru the bearings and therefore
More informationE A E xe ENCLOSURES. For Harsh & Hazardous Environments.
E A E xe ENCLOSURES For Harsh & Hazardous Environments www.ehawke.com Connecting you through innovation Experienced With over 60 years experience protecting people and assets in the world s most demanding
More informationParts Manual PL C 12/28/2010. MP4400 Series (Type 4) Random Orbital Sander. Non-Vacuum Models. Vacuum Models MP 44 XX - XX XX
Parts Manual MP4400 Series (Type 4) Random Orbital Sander Non-Vacuum Models Vacuum Models MP 44 XX - XX XX Orbit Pattern 00 = 3/6" Offset (Black Handle) - Standard Sanding Orbit 03 = 3/32" Offset (Chrome
More informationSITRANS F flowmeters SITRANS F C SITRANS F C MC2 4/169. Overview
Siemens G 2009 SITRNS flowmeters SITRNS C SITRNS C MC2 Overview SITRNS C MC2 is available as a standard version (DN 50 to DN 150 (2 to 6 )) and a hygienic, EHEDG-certified version (DN 20 to DN (¾ to 3
More informationPC-C5 DE RAN INDUSTRIAL & UTILITY GEAR DRIVES PAT.PEND. DE RAN GEAR, INC. Telephone A DON RANDOLPH COMPANY Fax
PC-C5 DE RAN INDUSTRIAL & UTILITY GEAR DRIVES PAT.PEND. DE RAN GEAR, INC. Telephone 806-746-6926 A DON RANDOLPH COMPANY Fax 806-746-6518 PRODUCT CATALOG PC-C5 GEAR DRIVE SELECTION THE FOLLOWING INFORMATION
More informationLiquid Turbine Flow Meters
NuFlo Liquid Turbine Flow Meters NuFlo developed its first flow meter for oilfield applications in 1957. The meter incorporated a tungstencarbide shaft and bearing to withstand the rugged conditions of
More informationFlow meters, Flow switches and Flow transmitters
MAX FLOW SIZES FROM 10 TO 160 GPM (60 TO 600 LPM) MAX LIQUID PRESSURE 300 PSI (20.69 BAR) MN SERIES MAX LIQUID PRESSURE 500 PSI (34.48 BAR) MM SERIES MAX LIQUID PRESSURE 2000 PSI (137.93 BAR) MH SERIES
More informationCC CC CC8-65 pumps
INSTRUCTIONS 1010-D00 e Section 1010 Effective March 2008 Replaces March 2006 Original instructions CC8-40 - CC8-50 - CC8-65 pumps INSTALLATION OPERATION MAINTENANCE BLACKMER Z.I. Plaine des Isles F- 89000
More informationHigh Performance Turbine Technology
The Brooks Parity Turbine Meter Sizes 3" - 16" High Performance Turbine Technology Design Specifications DS2215-10 July, 1999 DESCRIPTION The Parity Turbine Flowmeter utilizes advanced turbine meter technology
More informationTRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
l SPECIFICATIONS STAINLESS STEEL AIRMIX BACK PRESSURE FLUID REGULATOR Model : 120-10 / 120 Manual : 1310 573.042.212 Date : 10/10/13 - Supersede : 21/09/10 Modif. : Update TRANSLATION FROM THE ORIGINAL
More informationFlow meter Type Recordall (RCDL)
Badger Meter Europa GmbH Nürtinger Str. 76 72639 Neuffen (Germany) Tel. +49-7025-9208-0 Fax +49-7025-9208-15 www.badgermeter.de badger@badgermeter.de Flow meter Type Recordall (RCDL) Bronze model Features
More informationMX-SERIES OVAL GEAR FLOW METERS
Data Sheet MX-SERIES OVAL GEAR FLOW METERS Supplied by.com Call us on +44 (0)118 916 9420 Email info@247able.com MX-Series Oval Gear Flow Meters Features and Advantages P From ¼ DN8 at 0.5LPH to 4 DN100
More informationPC-C5 DE RAN INDUSTRIAL & UTILITY GEAR DRIVES PAT.PEND. DE RAN GEAR, INC. Telephone A DON RANDOLPH COMPANY Fax
PC-C5 DE RAN INDUSTRIAL & UTILITY GEAR DRIVES PAT.PEND. DE RAN GEAR, INC. Telephone 806-746-6926 A DON RANDOLPH COMPANY Fax 806-746-6518 PRODUCT CATALOG PC-C5 GEAR DRIVE SELECTION THE FOLLOWING INFORMATION
More informationFLOWMETERS PRODUCT OVERVIEW
FLOWMETERS PRODUCT OVERVIEW 2018 QSE MAG METER Non-Intrusive (No moving parts) Electromagnetic Flow Meter ELECTROMAGNETIC Turf / Irrigation Agriculture Irrigation Turf Irrigation Systems Micro Irrigation
More informationElectromagnetic Flow Monitor magphant
Technical Information TI 036D/06/en No. 50078457 Electromagnetic Flow Monitor magphant Monitoring and measurement Flow monitoring with selectable limit values (relay output) Flow measurement via 4...20
More informationM-0. M-0... series control, monitoring and signalling devices. Ex e
M-0 The new Cortem M-0 series control, monitoring and signalling devices are installed as external accessories on '' enclosures and boards used in any industrial environment where an explosive atmosphere
More informationEZ-View Flow Meters. General Design Features OPERATING PRINCIPLE
General Design Features 9 8 5 6 7 4 3 2 1 10 OPERATING PRINCIPLE The EZ-View Flow Meter is a variable area instrument. A precisionmolded, sharp-edged Orifice 1, located within the Piston Assembly, 2 forms
More informationSolenoid Valves Type 3963
Mounting and Operating Instructions Solenoid Valves Type 3963 Fig. 1 General Assembly, commissioning and operation of these devices may only be performed by experienced personnel. Proper shipping and appropriate
More informationTECHNICAL BULLETIN. Logix 510si Series Digital Positioner. Experience In Motion FCD LGENTB /13
Logix 510si Series Digital Positioner TECHNICAL BULLETIN FCD LGENTB0510-02 09/13 Experience In Motion Introduction The Logix 510si series are single acting, user-friendly digital positioners. As all positioners
More informationLimit Switch Type 4747
Limit Switch Type 4747 Ex d flameproof enclosure with inductive or mechanical contacts for linear actuators or rotary actuators acc. to VDI/VDE 3845 General The Type 4747 Limit Switch issues an electrical
More informationMini temperature switch Stainless steel switch enclosure Model TXS
Mechatronic temperature measurement Mini temperature switch Stainless steel switch enclosure Model TXS WIKA data sheet TV 31.70 Process Mini Series Applications Temperature monitoring and control of processes
More informationSmith Meter PD Meters 3" Steel Model E3
Smith Meter PD Meters 3" Steel Model E3 Specifications Bulletin SS01016 Issue/Rev 1.0 (8/13) The Smith Meter Model E3 is a 3", double-case, straight-through (S1 through S7) or angle-type (A1 and A3), rotary
More informationTechnical Offer. ViscoPro Measure Viscosity and Temperature on line for continuous process improvement
Technical Offer ViscoPro 2100 2015.2 Measure Viscosity and Temperature on line for continuous process improvement Advantages: Long and stable calibration Vibration and flow rate insensitivity Low maintenance
More informationKEL DIFFERENTIAL PRESSURE FLOWMETERS
KEL DIFFERENTIAL PRESSURE FLOWMETERS Flow Pressure Level Temperature measurement monitoring control Rugged Metal Construction Flow Rate to 2000 GPM Linear Scale For Horizontal or Vertical Pipes Threaded
More informationMODEL K WIRE INDICATING PRESSURE TRANSMITTER INTRINSICALLY SAFE VERSION OPERATION AND INSTRUCTION MANUAL
MODEL K712 2WIRE INDICATING PRESSURE TRANSMITTER INTRINSICALLY SAFE VERSION OPERATION AND INSTRUCTION MANUAL Switzer Instrument Limited Regd. Off: 29 (Old# 14), Thanikachalam Road, P.B.No.1423, Chennai
More informationHM...E. Turbine Flow Meters with Ermeto Fittings. Technical Datasheet
www.kem-kueppers.com Certified according to DIN EN ISO 9001 Technical Datasheet HM...E Turbine Flow Meters with Ermeto Fittings Application Turbine flowmeters serve to accurate measurement of continuous
More informationPSF50 Paddle flow switch
Paddle Flow Switch Paddle Flow Switch PSF50 Paddle flow switch Paddle flap flow / no flow switch Economically priced flow/no flow paddle operated flow switch. Simple and reliable design for liquids up
More informationLiquid Turbine Flowmeters
MEASUREMENT SYSTEMS NUFLO Liquid Turbine Flowmeters Accurate Flow Measurement NuFlo developed its first flowmeter for oilfield applications in 1957. The meter incorporated a tungsten-carbide shaft and
More informationOPTIMASS 2000 Technical Datasheet
OPTIMASS 2000 Technical Datasheet Sensor for bulk mass flow Large diameter for bulk measurement and custody transfer of liquids and gases Stainless Steel measuring tubes (NACE Compliant) Modular electronics
More informationSITRANS F flowmeters SITRANS F C
SITRNS F flowmeters Siemens G 2008 Overview is available as a standard version (DN 50 to DN 150 (2 to 6 )) and a hygienic, EHEDG certified version (DN 20 to DN 80 (¾ to 3 )). MC2 and MC2 hygienic are suitable
More information/2-way piston valves
> > ort size: DN 15... 100 Flange connection, ressure rating N 40 > > Valve operates without differential pressure (Zero delta ) > > Suitable for vacuum > > djustable: Damped operation () > > Valve piston
More informationFlow Research and Test Center. Creating resource technology for today and tomorrow.
Flow Research and Test Center Creating resource technology for today and tomorrow. "The Measurement Solutions Flow Research and Test Center in Erie is certainly one of the gems of our corporation s technological
More informationAveraging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA
Averaging Pitot Tube Flowmeter Catalogue ED IN AUSTRALIA WHAT IS A TORFLOW? TheTORFLOW is a multiport self-averaging flow meter with a design based on the classical pitot tube concept of fluid flow measurement.
More informationState-of-the-art viscosity monitoring
State-of-the-art viscosity monitoring The State-of-the-Art in Viscosity Monitoring In process environments, ensuring proper viscosity is a key success factor. You need an accurate, reliable, and durable
More informationINTERNATIONAL METAL ENGINEERING
INDICATING TEMPERATURE TRANSMITTER WITH HART 8080HT UNIVERSAL SETTINGS WITH HART PROTOCOL FOR VARIOUS INPUT SIGNALS 2 WIRE TECHNOLOGY, 4 TO 20mA ANALOG OUTPUT HIGH ACCURACY IN TOTAL AMBIENT TEMPERATURE
More informationTRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
l SPECIFICATIONS STAINLESS STEEL AIRMIX PRESSURE REGULATOR Models : 250-10 / 70 250-10 / 120 120-5 / 40 Manual : 1310 573.041.212 Date : 10/10/13 - Supersede : 21/09/10 Modif. : Update TRANSLATION FROM
More informationTRITEC SERIES THREE SCREW PUMPS
TM TRITEC SERIES THREE SCREW PUMPS The reliable pump people ROTARY SCREW PUMPS Performance Shown at 3500 RPM, 1.0 Centistokes DIFFERENTIAL PRESSURE, bar 280 0 20 40 60 80 1100 260 1000 440-46 Low Viscosity
More informationCountum Group. Metering Solutions. Aviation. Metering Solutions.
Countum Group Metering Solutions Aviation Metering Solutions www.satam.eu Satam equipment Your best available solution for aviation fuel metering 2 Welcome to Satam We are experts in hydrocarbon metering
More informationSITRANS F flowmeters SITRANS F US. SITRANS FUT1010 Ultrasonic flowmeter. Overview. Application
Overview SITRANS F flowmeters Application Liquid applications Gas applications Pipelines Custody transfer, allocation, Upstream Production wells, line balance, gathering, separation interface/densitometer
More informationG2 Industrial Grade Meters
G2 Industrial Grade Meters The unique modular approach of the Industrial Grade Meter line allows you to section 2: g2 industrial grade meters design a meter to match your specific application. Turbine
More information/2-way piston valves
> > ort size: DN 15... 100, Flange connection, ressure rating N 40 > > djustable: Damped operation () > > Valve operates without differential pressure (Zero delta ) > > Valve piston with TFE guide-ring
More informationGas analyzers EL3060 The specialists for hazardous areas
Gas analyzers EL3060 The specialists for hazardous areas Compact and combinable the analyzers E ABB Analytical possesses decades of experience in the area of explosion protection. The EL3060 series unifies
More informationLIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX )
LIMIT SWITCH Hawkeye - HX Magnetic Solid State Proximity Sensors Installation, Maintenance and Operating Instructions (HX ) Publication# 03revA Table of Contents Publication# 03revA Table Of Contents...
More information102 Differential Pressure Switch
Knurled cap over set point adjustment High side process connection 1/4 NPT(F) [1/2 NPT(F) optional] onal] Hermetically sealed switching element capsule with 18 AWG wire leads, 18 (45.7 cm) in length 102
More informationSEAT BELT LOAD CELL. Load cell that measures the forces at the seat belt during automotive crash or sled tests.
SEAT BELT LOAD CELL Load cell that measures the forces at the seat belt during automotive crash or sled tests. Lightweight and durable design High accuracy User replaceable cable Easy attachment of seat
More informationLevel Measurement Continuous level measurement Ultrasonic transmitters
Siemens AG 2018 Overview Configuration ultrasonic level transmitter, ideal for level, volume, and volume flow measurements. It works with liquids, slurries, and bulk materials up to 12 m (0 ft). Benefits
More informationGenesis Series 2" and 3" Steel Meters
SPECIFICATIONS Genesis Series 2" and 3" Steel Meters Bulletin SS01060 Issue/Rev. 1.0 (2/17) SMITH METER PD METERS TechnipFMC Smith Meter Genesis Series 2" and 3" PD meter is a single case, positive displacement,
More informationViscomaster TM series viscosity transmitters for marine and power HFO applications
Viscomaster TM series viscosity transmitters for marine and power HFO applications n On-line real-time Kinematic viscosity n Marine approved n Minimum maintenance n High accuracy n Simple to use Viscomaster
More information24W Explosion Proof POE Injector - Adds Power Over Ethernet Functionality to 24V POE Equipment - 1A
24W Explosion Proof POE Injector - Adds Power Over Ethernet Functionality to 24V POE Equipment - 1A Part #: EXP-IP-POE-INJ-24V-24W Page: 1 The EXP-IP-POE-INJ-24V-24W from Larson Electronics is an Explosion
More informationFlow Measurement SITRANS F C. Flow sensor MASS 2100 DI 3 to DI 40. 4/180 Siemens FI
Siemens AG Flow sensor MASS DI 3 to DI 0 Overview MASS DI 3 to DI 0 is suitable for accurate mass flow measurement of a variety of liquids and gases. The sensor offers superior performance in terms of
More information6" Steel Model G6. Smith Meter Rotary Vane PD Meters. Features. Operating Specifications Maximum Flow Rate. Options
SPECIFICATIONS 6" Steel Model G6 Bulletin SS01014 Issue/Rev. 1.0 (4/18) Smith Meter Rotary Vane PD Meters The Smith Meter Model G6 Meter is a 6", double-case, straight-through rotary vane type positive
More informationFT Series. Turbine Flowmeters. Description. Features. Applications. Operation. FT Series Turbine Flowmeters
FT Series Turbine Flowmeters Description Flow Technology s FT Series turbine flowmeters utilize a proven flow measurement technology to provide exceptionally reliable digital outputs. Because of their
More information