Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht

Transcription

1 prachteck Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht acht Pracht Pracht Pracht Pracht EDITION Pracht Pracht 9.1Pracht Pracht Pracht Pracht P Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht Pracht acht Pracht Pracht Pracht Pracht Pracht LEDPracht Pracht Pracht Pracht Pracht P acht Pracht Pracht Pracht Pracht ENGLISCH Pracht Pracht Pracht Pracht Pracht Pracht P

2

3 It is invisible, and at the same time essential for everything visible: Light. However, light is not only a medium permitting seamen to find back home in the dark. Light is Life, Orientation and Ambience. We provide custom engineered lighting solutions so as to fully satisfy your requirements.

4 5

5 prachteck Extremely low-profile luminaire system made of aluminium 6 8 Areas of application: Architectural lighting solutions, shopping arcades, transport services and accent lighting. GaliLED The LED concept made of RRM Areas of application: Industrial halls, logistics centres, cold storage facilities and architectural lighting solutions. Apollo LED The LED System with adjustable reflectors Areas of application: Accent lighting, logistics centres, cold storage facilities and architectural lighting solutions. Tubis LED Tubular luminaire 90 mm dia. 14 Areas of application: Façade illumination, accent lighting, architectural lighting solutions and cold storage facilities. Tinos LED Tubular luminaire 60 mm dia. 15 Areas of application: Façade illumination, accent lighting, architectural lighting solutions and cold storage facilities. Tanaro LED Tubular luminaire 40 mm dia. 16 Areas of application: Façade illumination, accent lighting, architectural lighting solutions and cold storage facilities. For independance from limited resources and without reliance on basic food stuff raw materials! Apollo LED GaliLED prachteck 03 Tubis LED 04 Tinos LED 05 Tanaro LED 06 Luna N LED Basic luminaire with flexible LED equipment carrier T5/T8, LOPRA 17 Areas of application: Cost-effective object illumination. Luna N LED 07 Troja LED and services trunking Vandalism luminaire Areas of application: Architectural lighting solutions, transport facilities, trade and industry, underpasses with direct public access. Lugano LED Compact luminaire 22 Areas of application: Accent illumination, accessible cooling cells and illumination of small rooms. Taunus LED Surface and recessed mounting luminaire 23 Areas of application: Cold storage facilities, architectural lighting solutions and illumination of small rooms. Emergency Luminaire Hillux LED Emergency pictogram luminaire 24 Areas of application: Escape and rescue routes, information light. LED Variants 25 Troja LED/ Serv.Trunking 08 Lugano LED 09 Taunus LED 10 Hillux LED LED Variants

6 Luminaire system prachteck PRODUCT ADVANTAGES Cover pane made of special light-diffusing LOPRA, acrylic glass (PMMA), polycarbonate (PC) or single pane safety glass. Optimised for homogeneous LED illumination no individual LED light spots are visible! Aluminium housing for optimum thermal management. Easy to install with PRACHT-CLIP-SYSTEM, hinged cover pane and quick release lock. Different colours, designs and cover panes can be specified. High-quality LEDs, for high energy efficiency and a long service life as well as excellent colour rendering. Variant: prachteck Achteck (octagon) Variant: prachteck Achteck (octagon) side view 6

7 Luminaire system prachteck PRODUCT ADVANTAGES Extremely low-profile and elegant luminaire made of aluminium. Equipped with LEDs (variable in number) or T5 fluorescent lamp. Additional light guiding through mirrors is possible. Different final lenses. Long maintenance intervals. Variant: prachteck Rechteck (rectangular) side view Variant: prachteck Quadrat (square) Variant: prachteck Quadrat (square) side view 7

8 Luminaire system prachteck RGB version upon request. Housing: Low-profile, elegant aluminium housing, anodised. Lamp cover: Optionally cover pane made of light-diffusing LOPRA, acrylic glass (PMMA), polycarbonate (PC), single pane safety glass. Hinged fold down cover with quick release lock. Seals: Circumferential silicone seal. Electrical components: Converter, depending on type either integrated or in external housing. Installation: Variable mounting points through stainless steel PRACHT-CLIP-SYSTEM. Suited for ceiling, pendant and horizontal wall mounting. 10 * *application pending Protection class (p.c.) I according to VDE 0711/EN Ingress protection IP65 Dust-proof Jet-proof 230V/50 Hz L 185 Type (VDE designation) Watt No. of LEDs Colour Art.-No. L temperature (mm) Square, 185x185 mm, cover pane made of light-diffusing LOPRA P8Q I /1 TP330-2 LO K ±2 Rectangular, width 185 mm, with Pracht pcb. 5P7 constant voltage 24V, cover pane made of light-diffusing LOPRA P8R I /5 5P7 LO K ±2 P8R I /10 5P7 LO K ±2 P8R I /15 5P7 LO K ±2 P8R I /20 5P7 LO K ±2 P8R I /25 5P7 LO K ±2 P8R I /30 5P7 LO K ±2 Rectangular, width 185 mm, with Pracht pcb. 21P1 constant voltage 24V, cover pane made of light-diffusing LOPRA P8R I /21 21P1 LO K ±2 P8R I /42 21P1 LO K ±2 P8R I /63 21P1 LO K ±2 P8R I /84 21P1 LO K ±2 P8R I /105 21P1 LO K ±2 Rectangular, width 185 mm, T5, cover pane made of clear PMMA, with Multiwatt electronic ballast P8R I 1 800/21-41 PLEX 1x14/ ±2 P8R I 1 800/22-42 PLEX 2x14/ ±2 P8R I 1 800/23-43 PLEX 1x21/ ±2 P8R I 1 800/24-44 PLEX 2x21/ ±2 P8R I 1 800/25-45 PLEX 1x28/ ±2 P8R I 1 800/26-46 PLEX 2x28/ ±2 P8R I 1 800/ PLEX 1x35/49/ ±2 P8R I 1 800/ PLEX 2x35/49/ ±2 Rectangular, width 185 mm, T5 and LED (dual power), cover pane made of light-diffusing LOPRA P8R I /45-5 DP LO 1x28 + 6, K ±2 P8R I /47-5 DP LO 1x35 + 6, K ±2 50 Octagon design Octagon industry Luminaire width 285 mm Other cover panes or LED versions OLED variants Services trunking width 185 mm Services trunking width 285 mm upon request upon request upon request upon request upon request upon request upon request Note: Other wattages and LED versions are available upon request, OSRAM POWER Flex, for example. Note: Standard is aluminium anodised, RAL colours upon request. Graffiti protect system upon request. Areas of application: Architectural lighting solutions, shopping arcades, transport services and accent lighting. 8

9 9

10 INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light GaliLED The LED concept Equipped with lenses and mirror for different beam angles as well as RGB version upon request. Single LED arrangement. Housing: Slim, elegant, fully sealed luminaire housing made of renewable raw materials (RRM), white, substantially resistant against acids and alkalis. Socket end pieces: One-part push-fit lamp holder end pieces made of RRM, impact resistant, with stainless steel clip. Lamp cover: With lamp protection tube 50 mm dia. Seals: Short, ageing resistant silicone seals. Electrical components: High-performance LEDs and integrated converter; through-wiring 7x2.5 mm 2 max. Installation: Variable mounting points through stainless steel PRACHT-CLIP-SYSTEM. Suited for ceiling, pendant and horizontal wall mounting. 10 * Variable mounting points *application pending Protection class (p.c.) I or II in accordance with 0711/EN Ingress protection IP65 Dust-proof Jet-proof Type (VDE designation) LED arrangement Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Single luminaire GaliLED, housing made of RRM, cover made of PMMA clear, p.c. I, with Pracht pcb. 4P7 constant current 700 ma, without through-wiring PNR DD 2000/1-4 4P7 LS50 NAWAROH single K ±2 1.6 PNR DD 2000/1-8 4P7 LS50 NAWAROH single K ±2 1.6 PNR DD 2000/1-12 4P7 LS50 NAWAROH single K ±2 1.7 PNR DD 2000/1-16 4P7 LS50 NAWAROH single K ±2 1.8 PNR DD 2000/1-20 4P7 LS50 NAWAROH single K ±2 1.8 PNR DD 2000/1-24 4P7 LS50 NAWAROH single K ±2 2.1 PNR DD 2000/1-28 4P7 LS50 NAWAROH single K ±2 2.1 PNR DD 2000/1-32 4P7 LS50 NAWAROH single K ±2 2.4 PNR DD 2000/1-36 4P7 LS50 NAWAROH single K ±2 2.4 Single luminaire GaliLED, housing made of RRM, cover made of PMMA clear, p.c. I, with Pracht pcb. 4P3 constant current 350 ma, without through-wiring PNR DD 2000/1-4 4P3 LS50 NAWAROH single K ±2 1.6 PNR DD 2000/1-8 4P3 LS50 NAWAROH single K ±2 1.6 PNR DD 2000/1-12 4P3 LS50 NAWAROH single K ±2 1.7 PNR DD 2000/1-16 4P3 LS50 NAWAROH single K ±2 1.8 PNR DD 2000/1-20 4P3 LS50 NAWAROH single K ±2 1.8 PNR DD 2000/1-24 4P3 LS50 NAWAROH single K ±2 2.1 PNR DD 2000/1-28 4P3 LS50 NAWAROH single K ±2 2.1 PNR DD 2000/1-32 4P3 LS50 NAWAROH single K ±2 2.4 PNR DD 2000/1-36 4P3 LS50 NAWAROH single K ±2 2.4 Extra cost: Dim Dali, upon request Mirror narrow beam: replace the fourth digit of the Art.-No. with 5, upon request Mirror all round distribution: replace the fourth digit of the Art.-No. with 6, upon request Note: For through-wiring options, see table on page 21 at the bottom. Note: Other wattages and LED versions available upon request. Note: Other covers made of prachtopal or polycarbonate, for example, are available. Areas of application: Industrial halls, logistics centres, cold storage facilities and architectural lighting solutions. For independance from limited resources and without reliance on basic food stuff raw materials! GaliLED with mirror. 10

11 GaliLED The LED concept Equipped with lenses and mirrors for different beam angles as well as RGB version upon request. Twin LED arrangement. INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light Housing: Slim, elegant, fully sealed luminaire housing made of renewable raw materials (RRM), white, substantially resistant against acids and alkalis. Socket end pieces: One-part push-fit lamp holder end pieces made of RRM, impact resistant, with stainless steel clip. Lamp cover: With lamp protection tube 50 mm dia. Seals: Short, ageing resistant silicone seals. Electrical components: High-performance LEDs and integrated converter; through-wiring 7x2.5 mm 2 max. Installation: Variable mounting points through stainless steel PRACHT-CLIP-SYSTEM. Suited for ceiling, pendant and horizontal wall mounting. 10 * Variable mounting points 60 *application pending Protection class (p.c.) I or II in accordance with 0711/EN Ingress protection IP65 Dust-proof Jet-proof Type (VDE designation) LED arrangement Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Single luminaire GaliLED, housing made of RRM, cover made of PMMA clear, p.c. I, with Pracht pcb. 4P7 constant current 700 ma, without through-wiring PNR DD 2000/2-8 4P7 LS50 NAWAROH twin K ±2 2.9 PNR DD 2000/2-16 4P7 LS50 NAWAROH twin K ±2 3.0 PNR DD 2000/2-24 4P7 LS50 NAWAROH twin K ±2 3.2 PNR DD 2000/2-32 4P7 LS50 NAWAROH twin K ±2 3.3 PNR DD 2000/2-40 4P7 LS50 NAWAROH twin K ±2 3.4 PNR DD 2000/2-48 4P7 LS50 NAWAROH twin K ±2 3.7 PNR DD 2000/2-56 4P7 LS50 NAWAROH twin K ±2 3.8 PNR DD 2000/2-64 4P7 LS50 NAWAROH twin K ±2 4.2 PNR DD 2000/2-72 4P7 LS50 NAWAROH twin K ±2 4.2 Single luminaire GaliLED, housing made of RRM, cover made of PMMA clear, p.c. I, with Pracht pcb. 4P3 constant current 350 ma, without through-wiring PNR DD 2000/2-8 4P3 LS50 NAWAROH twin K ±2 2.9 PNR DD 2000/2-16 4P3 LS50 NAWAROH twin K ±2 3.0 PNR DD 2000/2-24 4P3 LS50 NAWAROH twin K ±2 3.2 PNR DD 2000/2-32 4P3 LS50 NAWAROH twin K ±2 3.3 PNR DD 2000/2-40 4P3 LS50 NAWAROH twin K ±2 3.4 PNR DD 2000/2-48 4P3 LS50 NAWAROH twin K ±2 3.7 PNR DD 2000/2-56 4P3 LS50 NAWAROH twin K ±2 3.8 PNR DD 2000/2-64 4P3 LS50 NAWAROH twin K ±2 4.2 PNR DD 2000/2-72 4P3 LS50 NAWAROH twin K ±2 4.2 Extra cost: Dim Dali, upon request Mirror narrow beam: replace the fourth digit of the Art.-No. with 5, upon request Mirror all round distribution: replace the fourth digit of the Art.-No. with 6, upon request L 126±2 195±2 Note: For through-wiring options, see table on page 21 at the bottom. Note: Other wattages and LED versions available upon request. Note: Other covers made of prachtopal or polycarbonate, for example, are available. Areas of application: Accent lighting, logistics centres, cold storage facilities and architectural lighting solutions. For independance from limited resources and without reliance on basic food stuff raw materials! GaliLED with mirror and twin LED arrangement. 11

12 INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light Apollo LED Equipped with lenses and mirrors for different beam angles as well as RGB version upon request. Single LED arrangement. Housing: Slim, elegant, fully sealed luminaire housing made of glass fibre reinforced polyester, white, substantially resistant against acids and alkalis. Socket end pieces: One-part push-fit lamp holder end pieces made of PBT, impact resistant, with stainless steel clip. Lamp cover: With lamp protection tube 50 mm dia. made of prachtopal or PC. Seals: Short, ageing resistant silicone seals. Electrical components: High-performance LEDs and integrated converter; through-wiring 7x2.5 mm 2 max. Installation: Variable mounting points through stainless steel PRACHT-CLIP-SYSTEM. Suited for ceiling, pendant and horizontal wall mounting. 10 * *application pending Protection class (p.c.) I or II in accordance with 0711/EN Ingress protection IP65 Dust-proof Jet-proof Type (VDE designation) LED arrangement Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Single luminaire Apollo LED, prachtopal cover, impact resistant, p.c. I, with Pracht pcb. 4P7 constant current 700 ma, without through-wiring PPR DD 2000/1-4 4P7 LS50 PLEX PO single K ±2 1.6 PPR DD 2000/1-8 4P7 LS50 PLEX PO single K ±2 1.6 PPR DD 2000/1-12 4P7 LS50 PLEX PO single K ±2 1.7 PPR DD 2000/1-16 4P7 LS50 PLEX PO single K ±2 1.8 PPR DD 2000/1-20 4P7 LS50 PLEX PO single K ±2 18 PPR DD 2000/1-24 4P7 LS50 PLEX PO single K ±2 2.1 PPR DD 2000/1-28 4P7 LS50 PLEX PO single K ±2 2.1 PPR DD 2000/1-32 4P7 LS50 PLEX PO single K ±2 2.4 PPR DD 2000/1-36 4P7 LS50 PLEX PO single K ±2 2.4 Single luminaire Apollo LED, prachtopal cover, impact resistant, p.c. I, with Pracht pcb. 4P3 constant current 350 ma, without through-wiring PPR DD 2000/1-4 4P3 LS50 PLEX PO single K ±2 1.6 PPR DD 2000/1-8 4P3 LS50 PLEX PO single K ±2 1.6 PPR DD 2000/1-12 4P3 LS50 PLEX PO single K ±2 1.7 PPR DD 2000/1-16 4P3 LS50 PLEX PO single K ±2 1.8 PPR DD 2000/1-20 4P3 LS50 PLEX PO single K ±2 1.8 PPR DD 2000/1-24 4P3 LS50 PLEX PO single K ±2 2.1 PPR DD 2000/1-28 4P3 LS50 PLEX PO single K ±2 2.1 PPR DD 2000/1-32 4P3 LS50 PLEX PO single K ±2 2.4 PPR DD 2000/1-36 4P3 LS50 PLEX PO single K ±2 2.4 Extra cost: Dim Dali, upon request Mirror narrow beam: replace the fourth digit of the Art.-No. with 7, upon request Mirror all round distribution: replace the fourth digit of the Art.-No. with 8, upon request Special versions and prices for low temperatures upon request! Variable mounting points Note: For through-wiring options, see table on page 21 at the bottom. Other wattages and LED versions available upon request. Note: Other covers made of clear polycarbonate, for example, can be supplied. Areas of application: Accent lighting, logistics centres, cold storage facilities and architectural lighting solutions. 12

13 Apollo LED Equipped with lenses and mirrors for different beam angles as well as RGB version upon request. Twin LED arrangement. INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light Housing: Slim, elegant, fully sealed luminaire housing made of glass fibre reinforced polyester, white, substantially resistant against acids and alkalis. Socket end pieces: One-part push-fit lamp holder end pieces made of PBT, impact resistant, with stainless steel clip. Lamp cover: With lamp protection tube 50 mm dia. made of prachtopal or PC. Seals: Short, ageing resistant silicone seals. Electrical components: High-performance LEDs and integrated converter; through-wiring 7x2.5 mm 2 max. Installation: Variable mounting points through stainless steel PRACHT-CLIP-SYSTEM. Suited for ceiling, pendant and horizontal wall mounting. 10 * *application pending Protection class (p.c.) I or II in accordance with 0711/EN Ingress protection IP65 Dust-proof Jet-proof Befestigungslochabstand Variable mounting points variabel Type (VDE designation) LED arrangement Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Single luminaire Apollo LED, prachtopal cover, impact resistant, p.c. I, with Pracht pcb. 4P7 constant current 700 ma, without through-wiring PPR DD 2000/2-8 4P7 LS50 PLEX PO twin K ±2 2.9 PPR DD 2000/2-16 4P7 LS50 PLEX PO twin K ±2 3.0 PPR DD 2000/2-24 4P7 LS50 PLEX PO twin K ±2 3.2 PPR DD 2000/2-32 4P7 LS50 PLEX PO twin K ±2 3.3 PPR DD 2000/2-40 4P7 LS50 PLEX PO twin K ±2 3.4 PPR DD 2000/2-48 4P7 LS50 PLEX PO twin K ±2 3.7 PPR DD 2000/2-56 4P7 LS50 PLEX PO twin K ±2 3.8 PPR DD 2000/2-64 4P7 LS50 PLEX PO twin K ±2 4.2 PPR DD 2000/2-72 4P7 LS50 PLEX PO twin K ±2 4.2 Single luminaire Apollo LED, prachtopal cover, impact resistant, p.c. I, with Pracht pcb. 4P3 constant current 350 ma, without through-wiring PPR DD 2000/2-8 4P3 LS50 PLEX PO twin K ±2 2.9 PPR DD 2000/2-16 4P3 LS50 PLEX PO twin K ±2 3.0 PPR DD 2000/2-24 4P3 LS50 PLEX PO twin K ±2 3.2 PPR DD 2000/2-32 4P3 LS50 PLEX PO twin K ±2 3.3 PPR DD 2000/2-40 4P3 LS50 PLEX PO twin K ±2 3.4 PPR DD 2000/2-48 4P3 LS50 PLEX PO twin K ±2 3.7 PPR DD 2000/2-56 4P3 LS50 PLEX PO twin K ±2 3.8 PPR DD 2000/2-64 4P3 LS50 PLEX PO twin K ±2 4.2 PPR DD 2000/2-72 4P3 LS50 PLEX PO twin K ±2 4.2 Extra cost: Dim Dali, upon request Mirror narrow beam: replace the fourth digit of the Art.-No. with 7, upon request Mirror all round distribution: replace the fourth digit of the Art.-No. with 8, upon request L 126± ±2 Special versions and prices for low temperatures upon request! Note: For through-wiring options, see table on page 21 at the bottom. Other wattages and LED versions available upon request. Note: Other covers made of clear polycarbonate, for example, can be supplied. Areas of application: Accent lighting, logistics centres, cold storage facilities and architectural lighting solutions. Apollo LED variant with mirror and twin LED arrangement. 13

14 INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light Luminaire Tubis LED IP68/IPX9K Equipped with lenses for different beam angles as well as RGB version upon request. Housing: Tubular housing, fully sealed, made of polycarbonate (PC, impact resistant), prachtopal (PMMA, impact resistant) or glass, essentially resistant against acids and alkalis. Seals: Short, ageing resistant silicone seals. Electrical components: High-performance LEDs, converter, through-wiring, 5 x 2.5 mm 2 max. Installation: Variable mounting points through stainless steel PRACHT tube clips. Also approved for outdoor areas. Surface mounted luminaire: Suitable for ceiling, pendant, horizontal and vertical wall mounting. Beam angle: 140 approx. 10 Protection class (p.c.) I Ingress protection IP68/IPX9K Dust-proof Jet-proof Tubular housing Ø90 mm 90 Type (VDE designation) Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Tubis IP68/IPX9K LED, clear polycarbonate (impact resistant), with Pracht pcb. 5P7 constant voltage 24V, without through-wiring, luminaire rotatable over 360 PRR 8000/ 5 5P7 PC K ±2 2.8 PRR 8000/10 5P7 PC K ±2 3.4 PRR 8000/15 5P7 PC K ±2 4.2 PRR 8000/20 5P7 PC K ±2 5.0 PRR 8000/25 5P7 PC K ±2 5.8 PRR 8000/30 5P7 PC K ±2 6.8 Tubis IP68/IPX9K LED, clear polycarbonate (impact resistant), with Pracht pcb. 5P3 constant voltage 24V, without through-wiring, luminaire rotatable over 360 PRR 8000/ 5 5P3 PC K ±2 2.8 PRR 8000/10 5P3 PC K ±2 3.4 PRR 8000/15 5P3 PC K ±2 4.2 PRR 8000/20 5P3 PC K ±2 5.0 PRR 8000/25 5P3 PC K ±2 5.8 PRR 8000/30 5P3 PC K ±2 6.8 Tubis IP68/IPX9K LED, prachtopal (impact resistant), with Pracht pcb. 5P7 constant voltage 24V, without through-wiring, luminaire rotatable over 360 PRR 8000/ 5 5P7 PO K ±2 2.8 PRR 8000/10 5P7 PO K ±2 3.4 PRR 8000/15 5P7 PO K ±2 4.2 PRR 8000/20 5P7 PO K ±2 5.0 PRR 8000/25 5P7 PO K ±2 5.8 PRR 8000/30 5P7 PO K ±2 6.8 Tubis IP68/IPX9K LED, prachtopal (impact resistant), with Pracht pcb. 5P3 constant voltage 24V, without through-wiring, luminaire rotatable over 360 PRR 8000/ 5 5P3 PO K ±2 2.8 PRR 8000/10 5P3 PO K ±2 3.4 PRR 8000/15 5P3 PO K ±2 4.2 PRR 8000/20 5P3 PO K ±2 5.0 PRR 8000/25 5P3 PO K ±2 5.8 PRR 8000/30 5P3 PO K ±2 6.8 L Extra cost: Dim 1 10V upon request Dim Dali upon request Mirror upon request Note: For through-wiring options, see table on page 21 at the bottom. Note: Through-wiring for luminaire length of 490 mm is not possible. Note: Other wattages and LED versions available upon request, OSRAM POWER Flex, for example. Note: Equipping with lenses for different beam angles as well as RGB version upon request. Areas of application: Façade illumination, accent lighting, architectural lighting solutions and cold storage facilities. 14

15 Luminaire Tinos LED IP68/IPX9K Equipped with lenses for different beam angles as well as RGB version upon request. Housing: Tubular housing, fully sealed, made of polycarbonate (PC, impact resistant) or made of essentially resistant against acids and alkalis prachtopal (PMMA, impact resistant). Seals: Short, ageing resistant seals. Electrical components: LEDs, external converter. Please note: Delivery of the luminaire without converter! Installation: Variable mounting points through stainless steel PRACHT tube clips. Surface mounted luminaire: Suitable for ceiling, pendant, horizontal wall mounting. INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light 10 * *application pending Protection class (p.c.) III Ingress protection IP68/IPX9K Dust-proof Jet-proof Tubular housing Ø60 mm Variable mounting points Tube housing 60 mm dia. Type (VDE designation) Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Tinos IP68/IPX9K LED, made of polycarbonate (PC), with Pracht pcb. 5P7 constant voltage 24V, without through-wiring PRR 5000/ 5 5P7 PC K ±2 1.7 PRR 5000/10 5P7 PC K ±2 2.1 PRR 5000/15 5P7 PC K ±2 2.5 PRR 5000/20 5P7 PC K ±2 2.9 PRR 5000/25 5P7 PC K ±2 3.3 PRR 5000/30 5P7 PC K ±2 3.7 Tinos IP68/IPX9K LED, made of polycarbonate (PC), with Pracht pcb. 5P3 constant voltage 24V, without through-wiring PRR 5000/ 5 5P3 PC K ±2 1.7 PRR 5000/10 5P3 PC K ±2 2.1 PRR 5000/15 5P3 PC K ±2 2.5 PRR 5000/20 5P3 PC K ±2 2.9 PRR 5000/25 5P3 PC K ±2 3.3 PRR 5000/30 5P3 PC K ±2 3.7 Tinos IP68/IPX9K LED, made of prachtopal, with Pracht pcb. 5P7 constant voltage 24V, without through-wiring PRR 5000/ 5 5P7 PO K ±2 1.7 PRR 5000/10 5P7 PO K ±2 2.1 PRR 5000/15 5P7 PO K ±2 2.5 PRR 5000/20 5P7 PO K ±2 2.9 PRR 5000/25 5P7 PO K ±2 3.3 PRR 5000/30 5P7 PO K ±2 3.7 Tinos IP68/IPX9K LED, made of prachtopal, with Pracht pcb. 5P3 constant voltage 24V, without through-wiring PRR 5000/ 5 5P3 PO K ±2 1.7 PRR 5000/10 5P3 PO K ±2 2.1 PRR 5000/15 5P3 PO K ±2 2.5 PRR 5000/20 5P3 PO K ±2 2.9 PRR 5000/25 5P3 PO K ±2 3.3 PRR 5000/30 5P3 PO K ±2 3.7 Converter in enclosure, 230 V/50 Hz Converter in external enclosure 24V/DC, SK II IP upon request Converter in external enclosure 24V/DC, SK II IP upon request Converter 24V/DC, SK I IP upon request Note: Other wattages and LED versions available upon request. Integrated converter upon request. Areas of application: Façade illumination, accent illumination, architectural lighting solutions and cold storage facilities. 15

16 Luminaire Tanaro LED Equipped with lenses for different beam angles as well as RGB version upon request. Housing: Tubular housing made of polycarbonate, fully sealed, 40 mm dia. Seals: Short ageing resistant sealing system. Electrical components: LEDs, external converter. Please note: Delivery of the luminaire without converter! Installation: Variable mounting points through PRACHT-TUBE-CLIP-SYSTEM. Also approved for outdoor areas. INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light L 53 Also suitable as an emergency light with OSRAM OT 20/ /24 with OSRAM OT 75/ /24 Protection class (p.c.) III Ingress protection IP68 64 Synthetic material mount 40 Variable mounting points Stainless steel mount Type (VDE designation) Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Single luminaire Tanaro, Ø 40 mm, with Pracht pcb. 5P3 constant voltage 24V, without through-wiring, luminaire rotatable over 360 PRR 4000/ 5 5P3 PC LED K ±2 0.5 PRR 4000/10 5P3 PC LED K ±2 0.7 PRR 4000/15 5P3 PC LED K ±2 0,9 PRR 4000/20 5P3 PC LED K ±2 1.1 PRR 4000/25 5P3 PC LED K ±2 1,3 PRR 4000/30 5P3 PC LED K ±2 1.6 Single luminaire Tanaro, Ø 40 mm, with Pracht pcb. 5P3 constant voltage 24V, with through-wiring 2x2.5 mm 2, luminaire rotatable over 360 PRR 4022/ 5 5P3 PC LED K ±2 0.5 PRR 4022/10 5P3 PC LED K ±2 0.7 PRR 4022/15 5P3 PC LED K ±2 0,9 PRR 4022/20 5P3 PC LED K ±2 1.1 PRR 4022/25 5P3 PC LED K ±2 1,3 PRR 4022/30 5P3 PC LED K ±2 1.6 Converter in enclosure, 230 V/50 Hz Converter in external enclosure 24V/DC, SK II IP upon request Converter in external enclosure 24V/DC, SK II IP upon request Converter 24V/DC, SK I IP upon request Extra cost: Dim 1 10V upon request Note: Other wattages and LED versions available upon request, OSRAM POWER Flex, for example. Note: prachtopal tubular housing upon request. Areas of application: Façade illumination, accent lighting, architectural lighting solutions and cold storage facilities. 16

17 Luna N LED RGB version upon request. single and twin lamp Housing: Polyester, grey, glass fibre reinforced essentially resistant against acid and alkalis. Equipment carrier: Flexible owing to tool-less clip technology Lamp cover: Made of LOPRA or of PMMA clear. Clip made of stainless steel. Seals: Ageing resistant seals. Electrical components: Integrated converter. Illuminant: LEDs. Installation: Variable mounting points through PRACHT-CLIP-SYSTEM made of stainless steel. Suited for ceiling and pendant mounting. Horizontal wall mounting only directly without clip. INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life High ingress protection rating Protected LED, directional light * *application pending Protection class (p.c.) I in accordance with EN Ingress protection IP65 Dust-proof Jet-proof Type Watt Illuminants Art.-No. L Weight quantity (mm) (kg) Single luminaire Luna N LED-230 with injection moulded, PMMA Prachtmatic inside prism lamp cover, stainless steel clip, p.c. I, without through-wiring PPW E LED /1 PMMA, clear ±2 1.7 PPW E LED /3 PMMA, clear ±2 2.4 PPW E LED /5 PMMA, clear ±2 2.8 PPW E LED /2 PMMA, clear ±2 2.2 PPW E LED /4 PMMA, clear ±2 3.4 PPW E LED /6 PMMA, clear ±2 3.9 Type Watt No. of LEDs Colour Art.-No. L Width Weight temperature (mm) (mm) (kg) Single luminaire Luna N LED, PMMA Prachtmatic inside prism lamp cover, stainless steel clip, p.c. I, with Pracht pcb. 21P1 constant voltage 24V, without through-wiring PPW E LED 5700/ 42 21P1 PMMA LED LOPRA K ±2 86±2 2.1 PPW E LED 5700/ 84 21P1 PMMA LED LOPRA K ±2 86±2 2.4 PPW E LED 5700/105 21P1 PMMA LED LOPRA K ±2 86±2 2.7 Note: Cover made of PC upon request. Flexible LED equipment carrier in change with T5/T8 possible with Pracht clip technology! Areas of application: Cost-effective object illumination, not suited for unprotected outdoor areas. 17

18 18

19 19

20 INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light Luminaire Troja LED Equipped with lenses for different beam angles as well as RGB version upon request. Housing: Low-profile, rugged extruded aluminium housing, vandalism protected, integrated cable channel on the wall/ceiling side Cover: Made of polycarbonate (PC, impact-resistant), interior ribbing, supported by an aluminium frame profile and diecast aluminium end caps, white, powder coated, with hexagon or safety closure screws. Seals: Circumferential silicone seal. Electrical components: High-perf. LEDs, converter; through-wiring 7 x 2.5 mm 2 max. Installation: Can be mounted by a single fitter, with variable mounting points due to the PRACHT-CLIP-SYSTEM. After mounting of the cover, the mounting clips are protected against unauthorised access. 10 * Variable mounting points *application pending Protection class (p.c.) I or II according to VDE 0711/EN Ingress protection IP65 Dust-proof L 260±2 Jet-proof Type (VDE designation) LED arrangement Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Vandalism protected surface mounted luminaire Troja, with clear, impact-resistant PC cover, interior ribbing, with Pracht pcb. 5P7 constant voltage 24V, without through-wiring PAV 7000/ 5 5P7 single row K ±2 3.0 PAV 7000/10 5P7 single row K ±2 4.0 PAV 7000/15 5P7 single row K ±2 5.1 PAV 7000/20 5P7 single row K ±2 6.4 PAV 7000/25 5P7 single row K ±2 8.8 Vandalism protected surface mounted luminaire Troja, with clear, impact-resistant PC cover, interior ribbing, with Pracht pcb. 5P3 constant voltage 24V, without through-wiring PAV 7000/ 5 5P3 single row K ±2 3.0 PAV 7000/10 5P3 single row K ±2 4.0 PAV 7000/15 5P3 single row K ±2 5.1 PAV 7000/20 5P3 single row K ±2 6.4 PAV 7000/25 5P3 single row K ±2 8.8 Vandalism protected surface mounted luminaire Troja, with clear, impact-resistant PC cover, interior ribbing, with Pracht pcb. linear module 21P1 constant voltage 24V, without through-wiring PAV 7000/21 21P1 single row K ±2 3.4 PAV 7000/42 21P1 single row K ±2 4.7 PAV 7000/63 21P1 single row K ±2 6.0 PAV 7000/84 21P1 single row K ±2 8.6 Vandalism protected surface mounted luminaire Troja, with clear, impact-resistant PC cover, interior ribbing, with T5 illuminant and LED dual power, without through-wiring PAV 7000/45-5 DP 1x28 + 6, K ±2 6.0 PAV 7000/47-5 DP 1x35 + 6, K ± ±1 Further versions: Double or triple row LED arrangements as well as other lengths are available upon request. External converter arrangement upon request. Note: For through-wiring options, see table on page 21 at the bottom. Note: Other wattages and LED versions available upon request, OSRAM POWER Flex, for example. Note: Standard colour is white RAL 9010, other RAL colours upon request. Graffiti protect system upon request. Note: The luminaire can be mounted on services trunking. Areas of application: Architectural lighting solutions, traffic systems, trade and industry, underpasses with direct public access. Cable channel Troja services trunking, height 32 mm. Troja services trunking, height 75 mm. 20

21 Troja services trunking Areas of application: Transport services, trade and industry, underpasses etc. with direct public access. Housing: Low profile, rugged extruded aluminium profile, white, powder coated. Cover profile: Rugged aluminium profile, convex or flat with optional graffiti protect system and covers made of aluminium, rounded or flat. Installation: Direct ceiling, pendant or 45, mounting. 35 Services trunking H32, flat cover Services trunking H70, flat cover 78±1 70± ±1 70±1 260±2 260±2 260±2 Troja services trunking Height: 32 mm Height: 75 mm Art.-No. Art.-No. Services trunking per started meter Standard length 3 m Maximum length 6 m upon request upon request Accessories for services trunking, height 32 and height 75 mm: Cover profile convex, per started meter Cover profile flat, height 35, per started meter Cover profile flat, height 78, per started meter Cover profile flat, width 245 mm, per started meter T-piece rounded Corner mounting bracket End cover for corner mounting Cable retainer Coupling made of stainless steel (connector), two are required per joint Loudspeaker punch out according to customer specifications Loudspeaker installation kit according to customer specifications Graffiti protect system for services trunking Graffiti protect system for cover profile Mitre cut Double mitre cut Trunking profile suspension according to customer specifications Services trunking end cover, flat H35 (see top figure, left!) Services trunking end cover, flat H78 (see top figure, left!) Services trunking end cover, convex H102 (see top figure, middle!) Services trunking end cover, convex H145 (see top figure, middle!) Taking of dimensions, submitting a static calculation RAL colours upon request upon request Ordering Information for Through-wiring For luminaires Troja LED, GaliLED, Apollo LED, Tubis LED and Taunus LED, please replace the third digit of the article number with 0! Extra cost upon request! Number Without through-wiring, the article number remains unchanged 0 Through-wiring 2 x 1.5 mm 2 1 Through-wiring 2 x 2.5 mm 2 2 Through-wiring 3 x 1.5 mm 2 3 Through-wiring 3 x 2.5 mm 2 4 Through-wiring 4 x 1.5 mm 2 5 Through-wiring 4 x 2.5 mm 2 6 Through-wiring 5 x 1.5 mm 2 7 Through-wiring 5 x 2.5 mm 2 8 Through-wiring 5 x 1.5 mm x 1.5 mm

22 Luminaire Lugano LED Equipped with lenses for different beam angles as well as RGB version upon request. Housing: Compact luminaire made of polycarbonate, white, impact-resistant. Cover: Polycarbonate, clear, interior ribbing or opal. Seals: Ageing resistant silicone seals. Electrical components: High-performance LEDs; internal converter. Installation: Through mounting holes in the housing. Suited also for protected outside areas. INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light 10 Ingress protection IP65/IPX9K Protection class (p.c.) II Also suited as an emergency light with OSRAM OT 20/ /24 with OSRAM OT 75/ / ± ±1 Type (VDE designation) Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Surface mounted luminaire Lugano with clear, impact-resistant PC cover, interior ribbing, for LEDs, hinged fold down cover, single side fixing screw, with Pracht pcb. 5P3 or 5P7 constant voltage 24V, IP65 also usable for emergency lighting. PKA 321/5 5P K ±2 1.2 PKA 321/5 5P K ±2 1.2 with Pracht pcb. 4P3 constant current 350 ma PKA 321/5 4P K ±2 1.2 with single LED constant current 350 ma PKA 321/1 H K ±2 1.1 PKA 321/2 H K ±2 1.1 PKA 321/3 H K ±2 1.1 PKA 321/4 H K ±2 1.1 PKA 321/5 H K ±2 1.1 PKA 321/6 H K ±2 1.1 Recessed luminaire Lugano with clear, impact-resistant PC cover, interior ribbing, cover not hinged, screwed down on two sides, with Pracht pcb. 5P3 or 5P7 constant voltage 24V, IP65 also usable for emergency lighting PKE 321/5 5P K ±2 1.2 PKE 321/5 5P K ±2 1.2 with Pracht pcb. 4P3 constant current 350 ma PKE 321/5 4P K ±2 1.2 with single LED constant current 350 ma PKE 311/1 H K ±2 1.1 PKE 311/2 H K ±2 1.1 PKE 311/3 H K ±2 1.1 PKE 311/4 H K ±2 1.1 PKE 311/5 H K ±2 1.1 PKE 311/6 H K ±2 1.1 Note: Other wattages and LED versions available upon request, OSRAM POWER Flex, for example. Areas of application: Accented illumination, accessible cooling cells and illumination of small rooms. Lugano LED, interior ribbing. 22

23 Luminaire Taunus LED Equipped with lenses for different beam angles as well as RGB version upon request. INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light Housing: Polyester, white, glass fibre reinforced,, substantially resistant against acids and alkalis. Socket end pieces: One-part push-fit lamp holder end pieces made of PBT. Cover: Width 185 mm, Module 100, two panel width, acrylic glass (PMMA) or polycarbonate (PC, impact resistant), prachtopal upon request. Seals: Short, ageing resistant silicone seals. Electrical components: High-performance LEDs and integrated converter; through-wiring 7 x 2.5 mm 2 max. Installation: Variable mounting points due to the PRACHT-CLIP-SYSTEM made of stainless steel. Suited for surface and recessed ceiling mounting, pendant and horizontal wall mounting. 10 * Befestigungslochabstand Variable mounting variabel points *application pending Protection class (p.c.) II according to VDE 0711/EN Ingress protection IP65 Dust-proof Jet-proof Type (VDE designation) LED arrangement Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Surface and recessed mounting luminaire Taunus, PMMA cover, clear, with Pracht pcb. 5P7 constant voltage 24V, without through-wiring PPR 1000/ 5 5P7 PLEX PAN 185 single row K ±2 2.1 PPR 1000/10 5P7 PLEX PAN 185 single row K ±2 3.8 PPR 1000/15 5P7 PLEX PAN 185 single row K ±2 4.5 PPR 1000/20 5P7 PLEX PAN 185 single row K ±2 5.2 PPR 1000/25 5P7 PLEX PAN 185 single row K ±2 6.0 Surface and recessed mounting luminaire Taunus, PMMA cover, clear, with Pracht pcb. 5P3 constant voltage 24V, without through-wiring PPR 1000/ 5 5P3 PLEX PAN 185 single row K ±2 2.1 PPR 1000/10 5P3 PLEX PAN 185 single row K ±2 3.8 PPR 1000/15 5P3 PLEX PAN 185 single row K ±2 4.5 PPR 1000/20 5P3 PLEX PAN 185 single row K ±2 5.2 PPR 1000/25 5P3 PLEX PAN 185 single row K ±2 6.0 Surface and recessed mounting luminaire Taunus, polycarbonate cover (PC, impact resistant), clear, with Pracht pcb. 5P7 const. volt. 24V, without through-wiring PPR 1000/ 5 5P7 MAK PAN 185 single row K ±2 2.1 PPR 1000/10 5P7 MAK PAN 185 single row K ±2 3.8 PPR 1000/15 5P7 MAK PAN 185 single row K ±2 4.5 PPR 1000/20 5P7 MAK PAN 185 single row K ±2 5.2 PPR 1000/25 5P7 MAK PAN 185 single row K ±2 6.0 Surface and recessed mounting luminaire, polycarbonate cover (PC, impact resistant), clear, with Pracht pcb. 5P3 constant voltage 24V, without through-wiring PPR 1000/ 5 5P3 MAK PAN 185 single row K ±2 2.1 PPR 1000/10 5P3 MAK PAN 185 single row K ±2 3.8 PPR 1000/15 5P3 MAK PAN 185 single row K ±2 4.5 PPR 1000/20 5P3 MAK PAN 185 single row K ±2 5.2 PPR 1000/25 5P3 MAK PAN 185 single row K ±2 6.0 L 154±2 77 ±1 192±1 69 Note: For through-wiring options, see table on page 21 at the bottom. Note: Other wattages and LED versions available upon request, OSRAM POWER Flex, for example. Note: For simple mounting, we recommend accessory installation frames detailed on pages ; spare parts pages in our Full Line Catalogue Ed Areas of application: Cold storage facilities, architectural lighting solutions and illumination of small rooms 23

24 Emergency luminaire Hillux LED Emergency pictogram luminaire based on LED technology Operating unit integrated Recognition distance 32 m Housing: Fully sealed stainless steel housing for rough environments. Cover: Polycarbonate cover with escape pictogram. Captive frame and pictogram owing to stainless steel retaining cord. Frame mounted using captive safety screws. Seals: Circumferential, ageing resistant silicone sealing system. Electrical components: High-performance LEDs and integrated converter. Installation: Wall, ceiling and pendant mounting. INSTANTLY high luminous intensity Low power requirement High CO 2 reduction Long LED service life Insensitive to vibrations High ingress protection rating Protected LED, directional light 348±2 Protection class (p.c.) II Ingress protection IP65 198±2 348±2 198±2 73±2 Type (VDE designation) Watt No. of LEDs Colour Art.-No. L Weight temperature (mm) (kg) Information luminaire Hillux made of stainless steel, single side pictogram PRZ II 3000/2 P3 1 arrow pointing to the right K ±2 2,2 PRZ II 3000/2 P3 1 arrow pointing to the left K ±2 2,2 PRZ II 3000/2 P3 1 arrow pointing down K ±2 2,2 Information luminaire Hillux made of stainless steel, double side pictogram PRZ II 3000/4 P3 2 arrows pointing left/right K ±2 2.5 PRZ II 3000/4 P3 2 arrows pointing down K ±2 2.5 Note: Emergency pictogram luminaire available in different surface and recessed installation configurations. Areas of application: Escape and rescue routes, information light. 24

25 LED Variants Standard colour temperature 4000K, other colour temperatures upon request. Other LED wattages, colours and versions upon request. Type: LED power rating: High Power 5P3 ma Designation in the type key: 5P3 No. of LEDs per pcb.: 5 Wattage per pcb.: 6.25 W Pcb. length: 250 mm Distance between the LEDs: 50 mm Type of operation: Constant voltage 24V Article number: Dimming capability: Dimmable with additional modules 1-10V or DALI For use in luminaires, for example: Tubis, Tanaro, Troja, prachteck, Taunus, Lugano, Tinos Type: LED power rating: High Power 5P7 2.5W@700 ma Designation in the type key: 5P7 No. of LEDs per pcb.: 5 Wattage per pcb.: 12.5 W Pcb. length: 250 mm Distance between the LEDs: 50 mm Type of operation: Constant voltage 24V Article number: Dimming capability: Dimmable with additional modules 1-10V or DALI For use in luminaires, for example: Tubis, Tanaro, Troja, prachteck, Taunus, Lugano, Tinos Type: LED power rating: High Power 4P3 1.1W@350 ma Designation in the type key: 4P3 No. of LEDs per pcb.: 4 Wattage per pcb.: 4.4 W Pcb. length: 150 mm Distance between the LEDs: 37.5 mm Type of operation: Constant current 350 ma Article number: Dimming capability: Directly dimmable through suitable converter For use in luminaires, for example: GaliLED, Apollo, Lugano Type: LED power rating: High Power 4P7 2.2W@700 ma Designation in the type key: 4P7 No. of LEDs per pcb.: 4 Wattage per pcb.: 8.8 W Pcb. length: 150 mm Distance between the LEDs: 37.5 mm Type of operation: Constant current 700 ma Article number: Dimming capability: Directly dimmable through suitable converter For use in luminaires, for example: GaliLED, Apollo, Lugano Type: LED power rating: Mid Power 21P1 0.6W@170 ma Designation in the type key: 21P1 No. of LEDs per pcb.: 21 Wattage per pcb.: 14 W Pcb. length: 300 mm Distance between the LEDs: 14.3 mm Type of operation: Constant voltage 24V Article number: Dimming capability: Not dimmable For use in luminaires, for example: Luna N, prachteck 25

26 26

27 27

28 [ w w w. p r a c h t g r o u p. c o m ] Alfred Pracht Lichttechnik GmbH Am Seerain 3 I Dautphetal-Buchenau an der Lahn I Germany Phone I Fax welcome@prachtgroup.com I The details in our catalogue are produced with great care. Errors and technical modifications reserved. Effective date: 03/2012. Our general terms and conditions apply. Please see our homepage Item No