Project. Luminaire Schedule. Engineer. Issuing Office EDEN PROJECT GREEN BUILD HUB ELECTRICAL PARTICULAR SPECIFICATION LUMINAIRE SCHEDULE

Size: px

Start display at page:

Download "Project. Luminaire Schedule. Engineer. Issuing Office EDEN PROJECT GREEN BUILD HUB ELECTRICAL PARTICULAR SPECIFICATION LUMINAIRE SCHEDULE"

Buck Johns
6 years ago
Views:

1 Project Eden Project Green Build Hub Luminaire Schedule Engineer Issuing Office Michael Jay & Jason Tetlow Plymouth X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 1 of 16

2 Prepared & Rev. Description Reviewed by Date Checked by CP1 Construction Phase Issue JT SL DEC 2014 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 2 of 16

3 NOTES: 1. All fittings shall be complete with lamps manufactured by GE, Philips or Osram or LEDs manufactured by Phillips and Cree. The lighting calculations for this particular project have been designed using state of the art LED technology with a decorative and architectural perspective in mind. 2. All fluorescent fittings to be complete with warm start electronic high frequency (>30 khz) control gear and power factor correction. 3. All fittings to operate correctly at the specified internal and external temperatures (refer to Hoare Lea Mechanical Specification for details). 4. Manufacturer to select ballast or control gear to match the lamp. 5. All fittings to operate correctly on 230V ac +/- 10% single phase, 50Hz supply. 6. No striation of lamps to be present under any operating condition. 7. On Hoare Lea drawings E denotes luminaire with an integral emergency battery pack conversion suitable for the provision of emergency illumination. 3hr Non-Maintained 8. Do not order any fittings until written approval has been obtained from the Contract Administrator. 9. Where suspended light fittings are specified or required to meet light outputs, these are to be installed complete with all manufacturers suspensions and ceiling rose system. Ensure that ceiling roses have sufficient terminations to accommodate the luminaire switching or control indicated on the Hoare Lea drawings. 10. Provide luminaires with digital dimming high frequency ballast where dimmable luminaires are indicated. 11. All specifications detailed within this schedule will take precedence over alternations to catalogue product codes & references. 12. Any differences between listed luminaire specifications and product codes are to be brought to the attention of Hoare Lea prior to ordering. 13. Dimensions and technical details are for information only. Installation data should be obtained direct from manufacturer. Product codes are for reference only and should not be used for equipment order. X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 3 of 16

A Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : PHOTONSTAR LED LTD NEMESIS SURFACE MOUNT DOWNLIGHT NSSMXX_JT2-1600-840_WF_xxx High output surface mount downlight. 15 No.

4 A Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : PHOTONSTAR LED LTD NEMESIS SURFACE MOUNT DOWNLIGHT NSSMXX_JT _WF_xxx High output surface mount downlight. 15 No. are fed by a DC power source. Emergency integral ballast 3hr non maintained where indicated on drawings by E Constructed of pressure die-cast aluminium, finished in either matt white (MW) or matt black (MB). Site wide. Surface mounted IP20 15W LED 15W Electronic n/a Light Output Ratio [LOR] (%) : 99% Luminaire Efficacy (lumens/watt) : 90.2lm/W Dimensions [L x W x H] (mm): 135 x 135 x 5 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 4 of 16

THORN CN Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : CONCAVIA S 96218699 + 96218702 + 96218708 suspended CONCAVIA S 1x150W HIT HF LI + CONCAVIA S AC RPR DI + CONCAVIA S KIT

5 THORN CN Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : CONCAVIA S suspended CONCAVIA S 1x150W HIT HF LI + CONCAVIA S AC RPR DI + CONCAVIA S KIT COVER PR [STD] High bay reflector luminaire IP23, 1 x 150W HIT lamp. Tool-free installation with 1.5m pre-installed cable. Enhanced safety and reliability due to timed ignitors and thermally protected gear. Aluminium housing with anodised and painted finish. Aluminium, plastic or glass reflector, stainless steel suspension brackets, 35 C ambient temperature. Complete with lamp(s). Exhibition area Wire suspended high output ambient fixture IP23 150W HIT 163W Electronic n/a Efficacy (%) : 89.4% Luminaire Efficacy (lumens/watt) : 76.79lm/W Dimensions [L x W x H] (mm): 316 x 415 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 5 of 16

THORN PLANOR LED 2600 HFIX L840 [STD] 96210314 F Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : Slim and elegant suspended edge lit LED luminaire with 2680lm LED light engine

6 THORN PLANOR LED 2600 HFIX L840 [STD] F Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : Slim and elegant suspended edge lit LED luminaire with 2680lm LED light engine and Electronic, Frame: extruded aluminium, powder coated silvergrey. Brackets: aluminium, anodised in natural colour. Light guide optic: acrylic. Top cover: clear polycarbonate. Office Wire suspended IP20 32W LED 32W Electronic n/a Light Output Ratio [LOR] (%) : 99% Luminaire Efficacy (lumens/watt) : 83.75lm/W Dimensions [L x W x H] (mm): 1200 x 255 x 35 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 6 of 16

7 JCC Lighting RADIALED STYLE 21W OPAL BULKHEAD JC23209 Surface Mounted circular Wall Bulkhead comes with Emergency integral ballast 3hr non maintained where indicated on drawings by E M Location : Staircase Mounting Type : Surface Mount IP44 21W Lamp Type : LED 21W Control Gear Type : Electronic Dimmable : n/a Luminaire Efficacy (lumens/watt) : 59.52m/W Dimensions [L x W] (mm): 350 x 120 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 7 of 16

S Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : PHOTONSTAR LED LTD SURFACE SPOT AERO SSASXX_MC2-1000-840_WF_xxx Surface Mount Spot with Low Glare Options Features.

8 S Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : PHOTONSTAR LED LTD SURFACE SPOT AERO SSASXX_MC _WF_xxx Surface Mount Spot with Low Glare Options Features. Fed by a DC power source. Constructed of pressure die-cast aluminium, finished in either matt white (MW) Exhibition Area Trunking surface mounted IP20 11W LED 11W Electronic n/a Light Output Ratio [LOR] (%) : 99% Luminaire Efficacy (lumens/watt) : 75.5lm/W Dimensions [L x W x H] (mm): 50 x 50 x 5 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 8 of 16

THORN DANUBE DA 1200 LED HF E3 OP RD WHI L840 A compact, round bulkhead luminaire with 1200lm LED package. Electronic, fixed output control gear with 3 hour, manual test, emergency lighting circuit.

9 THORN DANUBE DA 1200 LED HF E3 OP RD WHI L840 A compact, round bulkhead luminaire with 1200lm LED package. Electronic, fixed output control gear with 3 hour, manual test, emergency lighting circuit. Base: die-cast aluminium. Diffuser: opal polycarbonate. Bezel: white polycarbonate. Class I electrical, IP65. Emergency integral ballast 3hr non maintained where indicated on drawings by E P Location : DDA Shower Mounting Type : Surface mounted IP65 12W Lamp Type : LED 15.5W Control Gear Type : Electronic Dimmable : n/a Light Output Ratio [LOR] (%) : 100% Luminaire Efficacy (lumens/watt) : 77.42lm/W Dimensions [L x W x H] (mm): 285 x 73 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 9 of 16

THORN VOYAGER C LED AREA MCE E3TX SIL 96548983 High performance, ceiling recessed, 3 hour Self-Test or Addressable Test if connected to Explorer Project/Vision, emergency lighting luminaire for 1 x

10 THORN VOYAGER C LED AREA MCE E3TX SIL High performance, ceiling recessed, 3 hour Self-Test or Addressable Test if connected to Explorer Project/Vision, emergency lighting luminaire for 1 x 3W LED with open area optic. Can be operated in either maintained or non-maintained modes. EM Location : Site wide Mounting Type : Surface IP40 3W Lamp Type : 1 x LED 5.41W Control Gear Type : Electronic Dimmable : n/a Housing manufactured from die-cast Aluminium, powder coated silver. Light Output Ratio [LOR] (%) : 99% Luminaire Efficacy (lumens/watt) : 19lm/W Dimensions [D x H] (mm): 146 x 146 x 37 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 10 of 16

DEXTRA E2 Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : OEH 8W NON-MAINTAINED EMERGENCY BULKHEAD OEH8NM3 IP65 8W Surface Self-Contained Polycarbonate bulkhead.

11 DEXTRA E2 Location : Mounting Type : Lamp Type : Control Gear Type : Dimmable : OEH 8W NON-MAINTAINED EMERGENCY BULKHEAD OEH8NM3 IP65 8W Surface Self-Contained Polycarbonate bulkhead. Robust polycarbonate body. Clear prismatic polycarbonate diffuser. Roof Wall IP65 8W 1 x LED 8W Electronic n/a Dimensions [L x W x H] (mm): 310 x 150 x 119 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 11 of 16

THORLUX LIGHTING DUO-SPOT TNI 16034 Adjustable emergency 7W LED twin head spotlights for open areas. Non-maintained, 3hour duration. Steel body finished silver (RAL 9006).

12 THORLUX LIGHTING DUO-SPOT TNI Adjustable emergency 7W LED twin head spotlights for open areas. Non-maintained, 3hour duration. Steel body finished silver (RAL 9006). E3 Location : Site wide Mounting Type : Wall IK Rating : IP66 IK x 3.5W Lamp Type : 2 x LED 7W Control Gear Type : Electronic Dimmable : n/a Light Output Ratio [LOR] (%) : 99% Luminaire Efficacy (lumens/watt) : 49.29lm/W Dimensions [L x W x H] (mm): 555 x 103 x 154 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 12 of 16

Tamlite Exit Location : Mounting Type : IK Rating : Lamp Type : Control Gear Type : Dimmable : EXIT BOX EB8NM3 Adjustable emergency 7W LED twin head spotlights for open areas.

13 Tamlite Exit Location : Mounting Type : IK Rating : Lamp Type : Control Gear Type : Dimmable : EXIT BOX EB8NM3 Adjustable emergency 7W LED twin head spotlights for open areas. Non-maintained, 3hour duration. Steel body finished silver (RAL 9006). Site wide Wall IP66 IK10++ 8W T5 8W Electronic n/a Dimensions [L x W x H] (mm): 360 x 180 x 88 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 13 of 16

JCC Lighting RADIALED STYLE 21W OPAL BULKHEAD JC23209 Surface Mounted circular Wall Bulkhead comes with Emergency integral ballast 3hr non maintained where indicated on drawings by E EX2 Location :

14 JCC Lighting RADIALED STYLE 21W OPAL BULKHEAD JC23209 Surface Mounted circular Wall Bulkhead comes with Emergency integral ballast 3hr non maintained where indicated on drawings by E EX2 Location : Staircase Exterior Mounting Type : Surface Mount IP44 21W Lamp Type : LED 21W Control Gear Type : Electronic Dimmable : n/a Luminaire Efficacy (lumens/watt) : 59.52m/W Dimensions [L x W] (mm): 350 x 120 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 14 of 16

THORN AREA1 42W TC-TEL/L830 HF PM ANT A/S [STD] 96255555 EX3 Location : Mounting Type : IK Rating : Lamp Type : Control Gear Type : Dimmable : A high performance, general purpose, area floodlight.

15 THORN AREA1 42W TC-TEL/L830 HF PM ANT A/S [STD] EX3 Location : Mounting Type : IK Rating : Lamp Type : Control Gear Type : Dimmable : A high performance, general purpose, area floodlight. Recyclable die-cast aluminium AS12 (LM6) body finished powder coated anthracite grey with 5mm thick toughened glass front cover. External Wall/Ceiling IP66 IK08 42W TC-TEL 46W Electronic n/a ULR (up light) : n/a (under canopy) Light Output Ratio [LOR](%): 61.8% Luminaire Efficacy (lumens/watt): 43lm/W Dimensions [L x W x H] (mm): 477 x 368 x 206 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 15 of 16

$energy consumption. Graphite full polyester powder finish (silver option). Strong die-cast LM2 aluminium body. High efficiency prismatic polycarbonate or borosilicate glass front refractor.$

16 THORLUX LIGHTING EX4 Location : Mounting Type : IK Rating : Lamp Type : Control Gear Type : Dimmable : REALTA [STD] RL 13535J High performance luminaires designed to minimise light pollution and energy consumption. Graphite full polyester powder finish (silver option). Strong die-cast LM2 aluminium body. High efficiency prismatic polycarbonate or borosilicate glass front refractor. External Wall IP66 IK W TC-T 46W Electronic n/a ULR (up light) : 2% Light Output Ratio [LOR](%): 98% Luminaire Efficacy (lumens/watt): 84.38lm/W Dimensions [L x W x H] (mm): 360 x 262 x 318 X:\Central File\ Green Build Hub\13 SPECIFICATIONS AND SCHEDULES\13C CONTRACT\ B-Luminaire Schedule.doc Page 16 of 16

We provide you with solutions

NEWS 2005 We provide you with solutions Professional solutions mean more than good design and products which are technically good. They mean being party to a process and contributing practical solutions