Coolant Pumps. Product of Proven Performance IE2/IE3. Machining Flooding Circulating Grinding Chip Conveyer Filtration

Transcription

1 IE2/IE3 Coolant Pumps Machining Flooding Circulating Grinding Chip Conveyer Filtration igh Pressure Cooling Through Tool Washing Filtration Refrigeration / Temperature Control Printing Packing Welding Mold Temperature Oil Skimming elt Disc 17 Media Water Coolant Chemicals Oil Ink Varnish Washing Solution Product of Proven Performance

2 CONTAMINATION RKM060, RK 060 RTA RT4 & RT2 CONTAMINATION andled by pumps Percentage of contamination against coolant volume ead Office Machine Shop Machine Shop uilding 2

3 I N D E X COOLANT PUMPS New Page 4-5 Inline Pumps Page 14 RTA Series Page 22 RFP Series New Page 6-7 Technical Details Page 8 RV25...RV250 RK115 Page 9 RV Page 10 RK275..RK800 Page 11 RK3.5-RK7 & RKC Series Page 15 RKM025 & RKM050 Page 16 RM 0250 Series Page 17 RKM 060 Series New Page 18 RT 2, RT 4 & RT 6 Series Page 19 RM 060 Series Page 23 RKM250 Series Page 24 RMS Series New Page Oil Skimmer ROS1...ROS5 New Page FS/FG & FFS Series RPP Pumps Page 29 Foundry Page 12 RM-V Series & RS Series Page RKM100 Series New Page 30 Piston Pumps Page 13 RR50 Series Page RKM0 & RKM300 3 Page 31 Other Products

4 Inline Pumps RSI RS RSN 4

5 5 COOLANT PUMPS

6 Gland Connector factory fitted is PG11, any other size available on request for specific models only. Note: Check direction of rotation in both speeds. The direction must be same in both speeds as shown in the name plate on the pump. Note: Connection by default is Star. Change the same for low voltage to delta. Note: 9. Current rating: The current rating and efficiency (as per IE2) of thepump motors, against their kw is given below. This table is for 2 pole (2800RPM) motors only. If the pump is fitted with special motor of other RPM, call factory for current details: NA NA NA NA NA NA Efficiency Efficiency Efficiency Efficiency

7 61-2RS 61-2RS 61-2RS 61-2RS** ** RS - RV40/270, RV40/ RS RS 61-2RS 63-2RS 61-2RS 65-2RS RS 63-2RS 62-2RS 65-2RS RS RS^ ^ RS-RKM1, 63-2RS-RV250 IEC 62-2RS 65-2RS RS 65-2RS IEC 64-2RS 65-2RS# 65-2RS 65-2RS* 65-2RS 66-2RS 66-2RS RS 66-2RS RS RS RS@ RS RS$ $ 3308-Double Groove for RMS Series STD.MULTISTAGE PUMP PIPE 1"/3/4"SP, WIT UNION STD. PUMP WIT OOSTER PUMP STD. PUMP OUTLET 1" SP 7

8 New RK115 CONVENTIONAL & MONOLOCK COOLANT PUMP RV25... RV250 SWITC L3 L2 F 15 RK Max. Level Min. Level ØA ØD MOUNTING OLES FOR d PCD, Ø7 x 4 SP d1 E ead in Meters RV40 RV250 RV160 RV100 F 4 RK80 L2 2 RV25 RV63 2 Max. Level MOUNTING OLES FOR d PCD, Ø7 x 4 SP d1 E Discharge in LPM Accessories: Coolant Tank with pipe set to suit Lathes, Grinding Machines, Drilling Machines available ØA A 180 Min. Level Coolant Tank CT1 8

9 / / / RK / / / G G1 1 4 RV Series as per IS: Max is 50mm extra -Tank, Pipe set available in standard sizes G Standard Spares : Impeller, ush/sleeve for long immersion pumps ALL PLASTIC ORIZONTAL PUMP RV Pump ousing Velox553 Pump ousing Cover Velox553 Impeller Velox553 Shaft SS410 Mechanical Seal Carbon/Ceramic O Ring NEOPRIN Types of Fluids - Diesel/Kerocene - Chemicals-Acids/Alkalis - Water/DM Water Temperature C Available also with DC motors & LDC motors with speed controls. 5 Very ideal for pumping clean chemicals for circulation in small w a s h i n g m a c h i n e s, c o o l a n t circulation, Fuel circulation, etc. 4 Suction & Delivery suitable for 3/4" ose Ø118 ead in Meters 3 2 RV Discharge in LPM

10 CONVENTIONAL IG FLOW COOLANT PUMPS RK RK800 OLE DIA 10 MM F d PCD 25 RK800 D L3 RK600 2 d1 DIA ead in Meters RK400 RK300 RK275 MAX. LEVEL E 5 A 1 MIN. LEVEL Discharge in LPM * All pumps - RV25, RV250, RK80, RK275, RK800 with Std. Immersion depth are glandless. They can run dry & will not have air locking problem. * Standard spares : Impeller (for long immersion pumps, above 300mm) bush/sleeve. 10

11 IG DISCARGE PUMP (FLOODING TYPE) RK3.5 TO RK7 & COUPLED SERIES ØSX 4 NO.S ON "d" pcd ØD ØF L3 ØSX 4 NO.S ON "d" pcd ØD L3 ØF RK5/RKC0 2 2 MAx. Level ØA 1Min. DELIVERY Level d1 SP d2 SP SUCTION 1 MAx. Level Min. ØA Level d2 1 SUCTION DELIVERY d1 SP SP Note: Mounting PLate to be split at the centre, to fit the pump. 500 * Standard spares : Impeller, ush & Sleeve Service and spares available through our country wide dealers network Ask use for more details visit our website : 11

12 VERTICAL FOOT MOUNTED RM-V SERIES Stem : C.I. / Impeller : AL. / Impeller Cover : C.I. / Shaft : EN8 / Mechanical seal : Carbon / Ceramic L3 Stem : Gunmetal / Impeller : C.I./Gunmetal / Impeller Cover : Gunmetal / Shaft : S.S / Mechanical seal : Carbon / Ceramic RM-V-100 ØD ead in Meters RM-V-50 d1 Suction E d2 Delivery d Discharge in LPM L The above shown performance curve is for water, without non-return valve & water lever 300MM below the pump suction. Pump delivers higher discharge when connected at tank level (-30% more), and reduces as the water level drops. 2. The pump can prime, following initial priming, upto 400MM, for higher depth upto 600MM a non-return value is to be used at the delivery side. Use of non-return value causes a drop of 10% in the performance. 3. The suction line must be air tight, and avoid the use of foot valve. * Standard spares : Impeller, Mechanical seal and gasket (sealing) set. RPM 1440 MOUNTING OLE SPIGOT 'A' RS90L / * Standard spares : Impeller 12

13 IG PRESSURE - LOW IMMERSION RR50 SERIES 80 ØD E L3 ead in Meters RR50-2 RR50 P MAX. LEVEL 7X4 NO.S ON 115 PCD. RR50 LP 1 ØF 10 MIN. LEVEL ØA Discharge in LPM * Standard spares : Impeller, ush & Sleeve & Spacers 13

14 RTA SERIES CONSTRUCTION OPTIONS APPLICATION Shaft S.S Types of Fluids - Water USED ON SPECIAL VERSIONS To handle liquids upto 160 C For Temperature controlling units, spindle cooling systems, mould temperature controlling, CNC turning centres, drilling, chilling units and industrial washing machine, etc. ØD L RTA22 2 Ø7X4 NO.S ON 115 PCD Ø100 3/4" SP RTA15 RTA21 RTA14 RTA13 5 RTA12 ØF Flow in LPM Model 1 2 D F L3 LPM POWER WT. +/-2 Max Max ead (M) Max Max kw Kg. RTA RTA RTA15 40LPM RTA21 RTA ead (M) Motor fitted is suitable for 415 V.50z, S1 duty and RPM Other voltage / freq. motor also available Standard Spares : Impeller, ush & Sleeve

15 MULTISTAGE COOLANT PUMPS RKM025 SERIES / 80 RKM ØD d1 SP 25 ead in Meters RKM02506 RKM02510 RKM0510 RKM0512 RKM058 1 ØF Mounting oles Ø7mm X 4 no.s on " d " PCD. 10 RKM02505 RKM054 ØA L Discharge in LPM. RKM RKM * Standard spares : Impeller Cover, Impeller & Mechanical Seal 15

16 MULTISTAGE ORIZONTAL COOLANT PUMP RM0250 SERIES 1 P 2, 230V, 50 z 30 ØD DELIVERY SUCTION 1 ead in Meters RM RM RM L A Discharge in LPM Model 1 A D Max L Max Max POWER kw RM RM02504 RM * Standard spares : Impeller, ush & Sleeve, Mechanical Seal, O-rings and spacers

17 MULTISTAGE COOLANT PUMP RKM060 SERIES 0 L3 ØD RKM06 RKM Ø7X4 NO.S ON160 E 45 ead in Meters RKM0612 RKM0608 RKM0606 RKM0604 A Discharge in LPM * Standard spares : Impeller, Sleeve, Impeller Cover with ush, Mechanical Seal and spacers 17

18 RT2, RT4 & RT6 Series / All CNC machines, lathes and machining centres. Most suited for through tool cooling, deep hole drilling, chilling units and industrial washing machine temperature controlling units etc. 240 RTA632A RT436A RT628A790 RT624A RT241A890 RT231A690 RT431A690 ead in Meters (10 Mtr. =1 bar or 1 Kg/sq. cm RT6A RT223A590 RT236A790 RT426A590 RT421A Discharge in LPM Discharge in LPM Model 1 2 D POWER +/-2 Max Max Max Max kw RT223A RT231A RT236A RT241A RT421A RT426A RT431A RT436A RT6A RT624A RT628A RT632A Note : Standard Motors will ne single speed 2,800 RPM. Dual Speed Motor is on request * Standard spares : Impeller, Sleeve, Impeller Cover with ush, Mechanical Seal and spacers 18

19 L 2 ØD 3 1 A 80 RM-0608 ead in Meters RM-0606 RM-0604 RM-0603 RM Discharge in LPM Model A RM D Max L Max 450 Max POWER kw RM RM RM RM * Standard spares : Impeller, ush & Sleeve, Mechanical Seal, O-rings and spacers 19

20 MULTISTAGE COOLANT PUMP RKM100 SERIES L RKM RKM150 ØSX 4 NO.7 ON "d" pcd 2 ØD d1 SP E ead in Meters RKM RKM RKM1 1 MAx. Level Min. Level A Discharge in LPM * Standard spares : Impeller, ush & Sleeve and spacers

21 MULTISTAGE COOLANT PUMPS RKM0 & RKM300 Available RKM226 ØD L RKM RKM218 2 OUTLET " d1 " SP ead in Meters RKM214 RKM210 Maxm. Level 1 ØA 45 E Ø7X4 NO.S ON RKM6 RKM310 RKM308 RKM306 RKM Discharge in LPM Min. Level 21

22 * Standard spares : Impeller, ush & Sleeve, Mechanical Seal and spacers WEIGT in Kg COOLANT PUMPS WIT FLAME PROOF MOTORS - RFP SERIES These are immersion type centrifugal pumps, suitable to mount a Flame Proof Motor of any standard make, to pump hazardous / flammable liquids. The motor should be of 2800/2P, 5 flange type. The pumps will be provided with parts suitable to handle the liquids that is to be pumped. The coupling will be provided with the pump to couple with the motor. WIT 71 Fr. FLAME PROOF MOTOR ASSEMLY L3 WITOUT MOTOR ASSEMLY Ø10.0drill MOTOR MOUNTING OLE PCD FOR 71 FR. 5 FLG. D L3 Ø160 Ø110 PUMP SAFT. 3 2 d1 2 MOUNTING OLES FOR d PCD, Ø7 x 4 d1 SP E MOUNTING OLES FOR d PCD, Ø7 x 4 F E ØA F ØA Model RFP40/2 +/ A -1/ Max 72 D Max 100 d +/ d1 E SP +/-2 G3/4" 30 F Max L3 Max 70 POWER kw WEIGT in Kg WIT MTR PUMP ONLY RFP80/ G1" RFP100/ G1" RFP160/2 RFP160/ G1" G1" The pumps are suitable for 71 Frame Flame Proof 5 Flange type Motors. Mounting suitable to other Frame size motors or pnumatic motors also can be given. For Performance refer to standard coolant pumps graph in the respective pages. Any other pumps in this catalog can be given with Flame Proof Motor

23 MULTISTAGE COOLANT PUMP RKM250 SERIES L3 50 ØF 45 RKM255 Ø7X 4 NO.S ON "d" pcd ØD RKM254 2 d1 SP E ead in Meters RKM252 1 MAx. Level Min. Level ØA RKM Discharge in LPM * Standard spares : Impeller, ush & Sleeve, Mechanical Seal and spacers 23

24 IG PRESSURE IG DISCARGE COOLANT PUMPS RMS Immersion dept in step 0mm available other than standard 1 OLE DIA 10 MM F d PCD 100 L RMS406 D 80 RMS604 d1 DIA 2 ead in Meters RMS404 RMS403 MAX. LEVEL A E RMS803 1 RMS402 RMS802 MIN. LEVEL 10 RMS Discharge in LPM * Standard spares : Impeller, ush & Sleeve

25 OIL SKIMMERS - ROS SERIES separation tray for PU elt 100 Cfor SS elt 35 OPTIONAL VFD for 3Ph (1Ph input / 3Ph output) for speed control ROS Phase, elt Skimmer 185 ROS3/5 3 Phase, elt Skimmer / inged elt ROS3-245 ROS DIGITAL TIMER MOUNTING OLES Ø8, APART,@180 DEG. FOR CONNECTION OF 1" OSE PIPE FOR OIL DRAIN w W 45 MIN. LIQUID LEVEL. Separator in 80 CUTOUT SIZE: APP. 75 X 55 STD. 40 MM WIDT ELT. 80 Model PU / SS FLAT ELT TYPE OIL SKIMMERS Immerssion Depth elt Width (w) Motor Power Supply # Weight in Kg.s ROS Phase 3.7 ROS Phase 4.0 ROS Phase 4.2 ROS Phase 5.7 ROS Phase 6.0 ROS Phase Model SS304 INGED ELT TYPE OIL SKIMMERS Immerssion Depth (mm) elt Width (w) Motor Power Supply # Weight in Kg.s ROS Phase / 1Phase 6.2 ROS Phase / 1Phase 6.6 ROS Phase / 1Phase 7.2 For All Oil Skimmer Models: Oil Removal rate: 3 LP Power : 0.04 kw. #- 3 Phase means 415V/50 z. 1 Phase means 230V/50 z.

26 OIL SKIMMERS - ROS SERIES ROS Phase, 40W elt Skimmer Weight 7.5 kgs TIMER DISC 300 COLLECTION TRAY 100MM ETWEEN MOUNTING OLES DISTANCE SKIMMED OIL OUTLET, SUIATLE FOR 1"OSE PIPE MOUNTING OLES, Ø7X2 DISTANCE MIN. LIQUID LEVEL. 260 ROS2- DISC OIL SKIMMER 1 Phase, 230V, 0.04kW ROS4- DISC OIL SKIMMER 3 Phase, 415V, 0.04kW Weight 3.5 kgs Weight 8.5 kgs Mounting oles for SKIMMER MOTOR WIT GEAR OX 123 Mounting oles for COLLECTION TRAY Waste Oil Path ROTATION DIRECTION FROM DISC END DIA Ø400 Ø500 EIGT

27 IG PRESSURE SCREW PUMPS FS, FG & FFS SERIES FS,FG, FFS / FS,FG, FFS / 238 FS,FG, FFS / FS,FG, FFS / 250 FS,FG, FFS / 232 FS,FG, FFS /

28 IG PRESSURE SCREW PUMPS FS, FG & FFS SERIES Pump Type FS FG FFS Desrciption SiC ousing for Screw Spindles ardened SG Iron ousing for Screw Spindles orizontal mounting (with mechanical seal) For all Application/ Pressure Upto 150 bar. Except for Aluminium & Grinding / Pres elow 50 ar For all Application/ Pressure Upto 150 bar. Special Version KT5 N A Coted Main Spindle & screw ousing Coated Outer female Support Spindles Axial Thrust Compenasation Details Optional Standard FS1, FS2,TFS3 FS1, FS2,TFS3-TFS5 FS1, FS2 TFS4-TFS6 TFS6 TFS3-TFS5 MTR FR ØD 100 FR Ø FR Ø FR Ø G G4 With Mechanical sealoutside mounting Positive suction Pressurem(7- bar)- with leakage port. FS1, FS2,TFS3-TFS5 FS1, FS2,TFS3,TFS4 TFS6 NA Ø 250 MAX. LIQ. LEVEL. Ø7X4 NO.S MOUNTING OLES ON 160 PCD. Ø MOUNTING OLE, SPLIT TYPE OUTLET MIN. LIQUID LEVEL. 168 INLET 158 1"SP OUTLET Ø10 dia holes, 4no.s 125x RPP160 in vertical immersion type. All wet ends in poly-propelene. RPP5 in horizontal mounting. All wet parts in poly-propelene. 28

29 FOUNDRY DIVISION Machined Ferrous Casting & Non Ferrous Castings Shot lasting Plant Capacity Ferrous - 0 Ton / month Non Ferrous - 10 Ton / month Material Grades Grey Iron FG - 0 / FG 250 / FG 300 Import Substitute Aluminum Copper and special alloys Weight Ferrous - Up to 150 Kg Non Ferrous - Up to 10 Kg Machine Shop Engineering Concepts to Castings Engineering Concepts to Castings

30 igh Pressure Piston Pumps Range: 1LPM 10 bar to 150 LPM 500 bar Application: Chip reaking Gun Drilling Through tool Cooling igh Pressure Washing Mist Cooling and many more Pump Construction in - rass & Stainless Steel Operating Temperature upto 85 C Over models to choose from ask detailed catlog Accessories : Pressure regulating unloader valve ead gun kit Gun kit for wash 3/8" high pressure hose with couplings 30

31 OTER SPECIALITY PRODUCTS Custom made Motors Dual Speed Motors Torque Motors Motors are manufactured as per customers requirements. Some of the specially designed & manufactured motors are : 1. Torque motors for indexing, compact gear boxes 2. Long shaft motors for looms & cheese widers 3. Dual speed motors for pumps, automats, gear boxes etc. 4. Fractional P motors - for centralized lubrication systems, circuit breaks, panel cooling, small ovens etc. 5. Single phase motors - with ON/Off controls, VFD drives for various industrial application, in 2 & 4 poles. 6. Standard induction motors - In all mountings & IE2 efficiency for any voltage & frequency & many more... Single phase Motors with controls / VFD Cheese winder motor Fractional P Motors Standard foot mounted motors RVP - Refueling pumps RVP pump with Kit RVP - Refueling pumps with accessories are available with 3 phase, 1 phase AC induction motors. Also available for vehicle mounting with DC 12V/24V motors. This finds usefull on gensets, earth moving vehicles for refueling. Ask for detailed Catalog. Coolant pump with VFD motor VFD -fitted to motor, for driving the pump, at various heads. This will save power, increase tool life, reduces coolant heating. Available upto 10kW, for all coolant pumps. The pressure can be directly set through CNC program for each tool. Auto electric parts Alternator Starter ousing with rush Starter Coil Xxxxxx xxxxxx Starter coil, alternate stators, starter housing with brush plate - manufactured as per requirement. Specification / Dimensions are subject to change due to Continuous improvement in the products igh pressure pump with VFD mounted motors 31

32 D E A L E R N E T W O R K Factory / ead Office Dealers / Representative LUDIANA CANDIGAR JAIPUR DELI Gurgaon Faridabad Rewari Muradabad Ghaziabad Noida PANTNAGAR / RUDRAPUR KANPUR AMEDAAD SURAT NASIK INDORE OPAL NAGPUR AURANGAAD JAMSEDPUR KOLKATTA ROURKELA Manufacturer: Whitefield Road, Mahadevapura Post, angalore India Ph.: Fax: coolantpump@rajamane.com Web: RIPL/P32/16 DS-R-MRK-001 R8 MUMAI PUNE YDERAAD KOLAPUR ELGAUM ULI ANGALORE CENNAI COIMATORE COCIN Dealer :