Promass Q for the process industry

Transcription

1 Products Solutions Services Promass Q for the process industry A unique Coriolis innovation from Endress+Hauser Slide 1

2 Promass Q for the process industry Promass Q Design Coriolis flowmeter Available on Proline 300/500 Light weight, compact and drainable Constructed entirely from 316/316L stainless steel Four line sizes: DN 25 to 100 (1" to 4") All industry standard process connections: ASME, EN, JIS Process temperature range: Standard -50 C to 205 C (-58 F to 400 F) Cryogenic -196 C to 180 C (-320 F to 356 F) Max. process pressure: bar (1480 psi) Slide 2

3 Promass Q for the process industry Size & weight Promass Q face to face dimensions (installation length) are identical to Promass F of the same nominal line size and flange connection! Slide 3

4 Promass Q for the process industry Key improvements & features Density Turndown 8 new improvements and features! Entrained Gas Process Sensitivity Size & Weight Pressure Drop Repeatability Safety Designed for real benefit! Slide 4

5 Promass Q for the process industry Applications for Promass Q Process Heavy crudes LNG NGL light hydrocarbons cryogenics Liquid leg of separators Well cement Hydrocarbon custody transfer Slide 5

6 Promass Q for the process industry Key improvements & features Density Turndown Entrained Gas Process Sensitivity Size & Weight Pressure Drop Repeatability Safety Slide 6

7 Promass Q for the process industry Changing viscosity and density sensitivity Slide 7

8 Promass Q for the process industry Density vs. density Slide 8

9 Promass Q for the process industry Density vs. viscosity Slide 9

10 Promass Q for the process industry Water across pressure & temperature Slide 10

11 Promass Q for the process industry Isobutanol across pressure & temperature Slide 11

12 Promass Q for the process industry Ambient temperature sensitivity on density But what about when my meter is installed: HERE!? - OR - HERE?! Slide 12

13 Promass Q for the process industry Ambient temperature sensitivity on density Slide 13

14 Promass Q for the process industry Key improvements & features Density Turndown Entrained Gas Process Sensitivity Size & Weight Pressure Drop Repeatability Safety Slide 14

15 Promass Q for the process industry Promass Q has a very wide useable turndown Yellow line Blue line Operating conditions Flow where the base accuracy begins Flow where 1 bar pressure loss is reached Useable turndown 1 bar pressure loss 0.05 Promass Q DN 100 (4 ) Slide 15

16 Promass Q for the process industry Pressure drop specifications Promass Q offers the highest flowrates at the lowest pressure drops Opens the ability to utilize smaller meters with less pressure loss! Slide 16

17 Promass Q for the process industry Key improvements & features Density Turndown Entrained Gas Process Sensitivity Size & Weight Pressure Drop Repeatability Safety Slide 17

18 Promass Q for the process industry Accuracy statements & GVF All three of the above have 15% GVF. Will a Coriolis meter respond in the same way to these situations? No. It cannot due to the differing motion of the fluid relative to the tube motion. Over simplification of reality can be misleading. Making a hard stated accuracy specification is not responsible nor is it especially useful. Slide 18

19 Promass Q for the process industry Multi-Frequency Technology (MFT) Patented! MFT - the same set of dual tubes are oscillated at two different resonant frequencies or modes simultaneously. The Coriolis meter is measuring the same fluid with the same amount of entrained gas, however the way these two modes react to this will be different. 1 st mode Raw mሶ und Corrected mሶ and Active compensation! 2 nd mode Through analyzing these results and the unique resonance properties of the two modes, we are then able to effectively and actively compensate for the associated measurement error. *Animation exaggerated for clarity Additional information Slide 19

20 Promass Q for the process industry Outgassing field trial results Slide 20

21 Cryogenic N2: Well cement: 60cP oil: Outgassing: Emulsion: Promass Q for the process industry Entrained gas examples Process 2% GVF <0.5% mass flow 3% GVF 0.3% mass flow 5% GVF <1% mass flow 10% GVF <1% density 8% GVF <2% mass flow Slide 21

22 Products Solutions Services Thank you very much for your attention Slide 22

23 Products Solutions Services Proline Promass A For process applications Slide Coriolis Product Management

24 Proline Promass A for process applications Smallest footprint for integration compact and lightweight DN 02 (1/12") 3.3 kg (7 lbs) 264 mm (10.39 in) DN 04 (1/8") 5.15 kg (11 lbs) 310 mm (12.2 in) DN 01 (1/24") 1.75 kg (4 lbs) 187 mm (7.36 in) (sensor only, fitted with VCO) Slide Coriolis Product Management

25 Proline Promass A for process applications New Promass A key characteristics at a glance Topic Measuring tube materials Sensor housing material New Promass A design (316/316L) stainless steel & Alloy C22 Complete external design in 316L stainless steel (suitable for offshore) Max pressure rating bar / 6250 psi (corresponds to ASME B16.5 Material Group 3.8) Medium temperature range -50 to +205 C (-58 to +401 F) Mass and volume flow accuracy liquids ±0.10% Mass and volume flow repeatability liquids ±0.05% Mass flow accuracy gas ±0.35% Mass flow repeatability gas ±0.15% Density accuracy Temperature accuracy (ref. conditions) Transmitter and process connection offer ± g/cm3 field density & ±0.002 g/cm3 wide range density ±0.5 C (±0.9 F) See next slides Slide Coriolis Product Management

26 Proline Promass A for process applications Transmitter overview new Promass A sensor design Material Transmitter digital Standard aluminum Heavy duty, offshore stainless, cast CF3M 316L Hygienic compact stainless, sheet Hygienic ultra-compact stainless, sheet Slide Coriolis Product Management

27 Proline Promass A for process applications Process connection offer overview Tri-Clamp (316L) 1/2" 40 bar (580 psi) Note: All process connections are directly welded on the sensor (no adapters needed) Couplings and threads (316/316L) Alloy C22 4-VCO-4 G ¼" NPT ¼" All of the above bar (6250 psi) Flanges EN ASME B16.5 JIS B (316/316L) Alloy C22 PN 400 Cl (430.9 bar (6250 psi)) 63K All flanges: DN 15 (½") Slide Coriolis Product Management

28 Proline Promass A for process applications Process connection offer overview Tri-Clamp and all flanges: DN 15 (1/2 ) (*) In addition also several Alloy C22 lap joint flange versions are available Standard All wetted parts in st. steel Tri-Clamp Standard All wetted parts in Alloy C22 High pressure Measuring tube always in C22 PN 100 PN 100 (*) PN 400 (St. steel or C22) Cl. 600 Cl. 600 (*) Cl (St. steel or C22) JIS 63K JIS 63K (*) 4-VCO-4 4-VCO-4 4-VCO-4 (C22 only) G 1/4" internal thread G 1/4 internal thread G 1/4" int. thread (C22 only) NPT 1/4" internal thread NPT 1/4" internal thread NPT 1/4" int. thread (C22 only) Slide Coriolis Product Management

29 Proline Promass A for process applications Safety by design Superior corrosion resistance complete exterior sensor design in 316L as standard Directly welded process connections (no gaskets or adapters) International hazardous area approvals Developed according to IEC (SIL) Sensor housing burst pressure >100 bar (1450 psi) Additional safety layer rupture disk always included for high pressure versions optional for standard versions Significant reduced risk of particle clogging due to single tube design (cp. to dual tube systems with similar flow rate capacity, see next slide) Predefined breaking point ruptures at a pressure of 10 to 15 bar (145 to psi) Rupture disk Slide Coriolis Product Management

30 Proline Promass A for process applications Promass A vs competition reduced risk of particle clogging Significant reduced risk of particle clogging due to single tube design Promass A single tube design Other brand dual tube design Slide Coriolis Product Management

31 Proline Promass A for process applications Services, non destructive tests (NDTs), approvals and certificates A full range of services, NDTs, approvals and certificates are available to provide documented evidence that Promass A fulfills its stated high quality standards. How to order: Group 570, option HA: Cleaned from oil + grease (wetted parts) Group 580, option JB: Pressure test JC: 3.1 material certificate wetted parts + sensor housing JK: Positive material identification (PMI) test KE, KI, KN, KS: X-ray test (film) acc. to ISO , ASME B31.3, ASME VIII & NORSOK M-601 K5, K6, K7, K8: X-ray test (digital) acc. to ISO , ASME B31.3, ASME VIII & NORSOK M-601 Group 590, option LA: SIL LD: CRN LN: Sensor housing burst pressure, type test LR: NACE MR0175 / ISO LS: NACE MR0103 / ISO Slide Coriolis Product Management

32 Proline Promass A for process applications New dimension of low flow measurement innovative robust sensor design Slide Coriolis Product Management

33 Proline Promass A for process applications New dimension of low flow measurement innovative robust sensor design Higher frequency vibrational symmetry very stable zero point Sets the bar for small DN measuring performance PRELIMINARY VIDEO WORK IN PROGRESS Slide Coriolis Product Management

34 Proline Promass A for process applications Useable turndown definition Green line Blue line Flow where the base accuracy begins Flow where 1 bar pressure loss is reached Useable turndown 1 bar pressure loss Slide Coriolis Product Management

35 Proline Promass A for process applications New Promass A design with significantly improved useable turndown Improved zero point stability Larger measuring tubes HP: High pressure Slide Coriolis Product Management

36 Proline Promass A for process applications New Promass A DN 01 new dimension of low flow measurement Other Brand DN 06 Other Brand DN % 1.2 kg/h = 20.0 g/min Other Brand DN % 0.05 kg/h = 0.8 g/min 0.1% 0.48 kg/h = 8.0 g/min Other Brand DN 01 Slide Coriolis Product Management

37 Proline Promass A for process applications including high pressure applications Other Brand DN 04-HP 0.1% 4.4 kg/h = 73.3 g/min Other Brand DN 02-HP 1.0% 0.08 kg/h = 1.3 g/min 0.1% 0.8 kg/h = 13.3 g/min HP: High pressure Slide Coriolis Product Management

38 Proline Promass A for process applications New design stable performance over wide a viscosity range Slide Coriolis Product Management

39 Proline Promass A for process applications Universal sensor holder Recommended when there are concerns about the mechanical strength of the piping or the rotational stability of the installation (Tri-Clamp, VCO, G, NPT) One design for all DN/purposes Sensor neck Sensor holder Wall, table or pipe How to order Group 620, option PR: Sensor holder (for wall, table and pipe mount) As an accessory: material number Promass A 300 DN 04 VCO pipe mount Slide Coriolis Product Management

40 Proline Promass A for process applications Heating jacket for the new Promass A sensor design For applications where keeping a constant process temperature is important DN 01 (¹ ₂₄") DN 02 (¹ ₁₂") DN 04 (¹ ₈") How to order Group 620, option RB: Heating jacket, G ½" internal thread Group 620, option RD: Heating jacket, NPT ½" internal thread (served with a "G NPT" adapter) Via separate structure DK8003 (material number ) Slide Coriolis Product Management

41 Proline Promass A for process applications Proline Added Values Seamless system integration Web server Operation concept (HMI) Data storage concept Heartbeat Technology W@M Life Cycle Management Slide Coriolis Product Management

42 Proline Promass A for process applications Heartbeat Technology reliable and safe processes Developed acc. to IEC Functional Safety (SIL) Slide Coriolis Product Management

43 Products Solutions Services Thank you Promass A The lightweight champion for lowest flow rates and highest performance Slide Coriolis Product Management