Micro Motion ELITE Mass Flow and Density Meters

Transcription

1 Product Data Sheet PS March 2002 Micro Motion ELITE Mass Flow and Density Meters Now available with MVD Technology!

2 Micro Motion ELITE Meters Experience the most accurate Coriolis meters available today. Micro Motion ELITE meters are the leading flowmeter for precision flow measurement. And with good reason. ELITE meters offer the most accurate measurement available for virtually any process fluid, while exhibiting exceptionally low pressure drop. Seven sizes of ELITE meters offer direct mass flow, volume flow, density, and temperature measurement of liquids, gases, and slurries without the need for additional equipment, manual calculations or estimations. Micro Motion ELITE meters are designed for unsurpassed performance in even the most harsh operating environments. They have no moving parts, and no special mounting or flow conditioning requirements. Every ELITE meter features standard secondary containment, and is available with stainless steel or nickel alloy wetted parts and a wide variety of process connections to meet your every need. And, they require no maintenance saving you money over the course of their lifetime by helping you make the most of your time, people, and materials. ELITE meters carry hazardous area approvals for the U.S.A. and Canada, Europe, Australia, Japan and other areas in the Asia-Pacific region. 2 Micro Motion ELITE Meters

3 Special Applications Several ELITE meters have been designed for special applications. The CMF010 is our smallest meter, designed for remarkably high performance in low-flow applications. It features a single, continuous flow tube, and is also available in a high-pressure model, for applications up to 413 bar. Much larger in size is our CMF400. This 100 mm offers the most accurate measurement available in a high-capacity meter. The 80 mm CMF300A is a high-temperature meter. It provides the same accuracy and measurement capabilities as our other ELITE meters, at temperatures up to 343 C. Our CMF025, CMF050, and CMF100 meters are available with optional, flangeless, waferstyle process connections. MVD Technology Micro Motion ELITE meters are now available with MVD Technology a new, innovative, multivariable, digital signal processing capability. A core processor, integrally mounted on the ELITE sensor, works with our new Series 1000 and 2000 transmitters to improve ease of use, reduce downtime, and lower your flow metering costs. Meters with MVD Technology provide cleaner, noise-free digital signals. Digital signal processing means faster response times, enhanced diagnostic capabilities, higher accuracy, and better repeatability. System Integration Micro Motion offers a variety of microprocessorbased transmitters, any of which can be connected to our ELITE sensors. Depending on the transmitter model, features include milliampere and frequency/pulse outputs, transmitter and process control functions in a single device, and API outputs for crude oil and other hydrocarbon fluids. Other options include transmitters that can be installed in instrument racks or panels, or housed in NEMA or explosion-proof enclosures. Sensors and explosion-proof transmitters can be installed in the same hazardous area. Micro Motion ELITE meters can be installed as part of a Bell 202 multidrop network, an RS-485 digital communications network, or a Profibus- PA or FOUNDATION fieldbus system. Transmitters feature HART, Modbus, FOUNDATION fieldbus, Profibus-PA, and other communication protocols. And all our transmitters support Fisher-Rosemount PlantWeb field-based architecture, which uses the power of intelligent, interoperable field devices to improve plant performance. Micro Motion is known worldwide for increasing plant efficiency, production, and profitability. More than Micro Motion meters are installed and working in processes just like yours. Contact us, and discover the best precision flowmeters available today Micro Motion ELITE meters. Micro Motion Elite flowmeters support PlantWeb field-based architecture, a scalable way to use open and interoperable devices and systems to build process solutions of the future. Micro Motion ELITE Meters 3

4 Performance specifications Liquid Flow Mass Volume Nominal flow range kg/h l/h CMF010 0 to 82 0 to 82 CMF025 0 to to 1090 CMF050 0 to to 3400 CMF100 0 to to CMF200 0 to to CMF300 0 to to CMF400 0 to to Maximum flow rate kg/h l/h CMF CMF CMF CMF CMF CMF CMF Mass Flow Accuracy (2) 1700/2700 transmitter or direct host ±0,10% of rate (3) All other transmitters ±0,10% ± [(zero stability/ flow rate) x 100]% of rate Mass Flow 1700/2700 transmitter or direct host ±0,05% of rate (3) Repeatability (2) All other transmitters ±0,05% ± [½(zero stability/ flow rate) x 100]% of rate Zero stability kg/h CMF010 0,002 High-pressure CMF010P 0,004 CMF025 0,027 CMF050 0,163 CMF100 0,680 CMF200 2,18 CMF300 6,80 CMF400 40,91 Micro Motion has adopted the terminology "nominal flow range." The upper limit of this range is the flow rate at which water at reference conditions causes approximately 1 bar of pressure drop for ELITE sensors. (2) Accuracy includes the combined effects of repeatability, linearity, and hysteresis. All specifications for liquids are based on reference conditions of water at 20 to 25 C and 1 to 2 bar, unless otherwise noted. (3) When flow rate is less than (zero stability/0,001), accuracy equals ±[(zero stability/flow rate) x 100]% of rate and repeatability equals ±[½(zero stability/flow rate) x 100]% of rate. 4 Micro Motion ELITE Meters

5 Performance specifications continued Gas Flow (Air at 15 o C and 70 bar) Mass Standard Volume Nominal flow range (2) kg/h Nm 3 /h CMF010 0 to 32 0 to 25 CMF025 0 to to 355 CMF050 0 to to 870 CMF100 0 to to 3865 CMF200 0 to to CMF300 0 to to CMF400 0 to to Maximum flow rate kg/h Nm 3 /h CMF CMF CMF CMF CMF CMF CMF Mass Flow Accuracy (3) 1700/2700 transmitter or direct host ±0,35% of rate (4) All other transmitters ±0,50% ± [(zero stability/ flow rate) x 100]% of rate Mass Flow 1700/2700 transmitter or direct host ±0,20% of rate (4) Repeatability (3) All other transmitters ±0,25% ± [(zero stability/ flow rate) x 100]% of rate Zero stability kg/h Nm 3 /h CMF010 0,002 0,0015 High-pressure CMF010P 0,004 0,003 CMF025 0,027 0,021 CMF050 0,163 0,126 CMF100 0,680 0,526 CMF200 2,18 1,69 CMF300 6,80 5,26 CMF ,64 Air flows in Nm 3 /h (converted to normal conditions: 0 o C and 1,013 bara) when the meter is operated at 15 o C and 70 bara. (2) Micro Motion has adopted the terminology "nominal flow range." The upper limit of this range is the flow rate at which air at 15 C and 70 bar causes approximately 1 bar of pressure drop for ELITE sensors. (3) Accuracy includes the combined effects of repeatability, linearity, and hysteresis. All specifications for gas are based on reference conditions of air at 15 C and 70 bar, unless otherwise noted. (4) When flow rate is less than (zero stability/0,0035), accuracy equals ±[(zero stability/flow rate) x 100]% of rate, and repeatability is equal to ±[½(zero stability/flow rate) x 100]% of rate. Micro Motion ELITE Meters 5

6 Performance specifications continued Density with Model 2700, 3500, 3700, RFT9739, 5300, or RFT9709 transmitter with IFT9701 transmitter Accuracy kg/m 3 kg/m 3 High-pressure CMF010P liquid ±2,0 ±8,0 All other models liquid ±0,5 ±2,0 Repeatability High-pressure CMF010P liquid ±1,0 ±4,0 All other models liquid ±0,2 ±1,0 Range All models 0 to to 5000 Temperature Accuracy All models ±1 C ± 0,5% of reading in C Repeatability All models ±0,2 C Range (2) CMF010, CMF025, CMF050, CMF100, CMF200, CMF300M, CMF300H (3)(4) with core processor C 50 to 125 process fluid with junction box 240 to 204 process fluid High-temperature CMF300A (3) sensor 0 to 343 process fluid junction box 40 to 120 ambient CMF400 (5) Remote booster amplifier for CMF400 with integral booster amplifier with remote booster amplifier 40 to 60 process fluid 240 to 204 process fluid 40 to 60 ambient Accuracy includes the combined effects of repeatability, linearity, and hysteresis. All specifications for liquids are based on reference conditions of water at 20 to 25 C and 1 to 2 bar, unless otherwise noted. (2) For CENELEC/ATEX-compliant sensors, the CENELEC "T" rating and hazardous area classification depend on the maximum process fluid and ambient temperature. See page 11. (3) For CENELEC/ATEX-compliant sensors, the maximum ambient temperature is 55 C. Use of sensors with a junction box above 55 C is acceptable, provided the ambient temperature does not exceed the CENELEC "T" rating listed on page 11 for temperature of the fluid. (4) For CENELEC/ATEX-compliant sensors, the minimum process fluid and ambient temperature is 20 C. If the process fluid remains at or above 0 C, ambient temperature below 20 C is acceptable for sensors with a junction box, and ambient temperature of -40 C is allowed for sensors with a core processor. (5) For CENELEC/ATEX-compliant sensors, the maximum ambient temperature is 60 C and the minimum ambient temperature is -40 C. 6 Micro Motion ELITE Meters

7 Performance specifications continued Pressure ratings Flow tube rating PED approved Housing rating Short-term housing rating (3) bar Stainless steel sensors 100 Nickel alloy sensors 148 High-pressure CMF010P 413 Sensors comply to council directive 97/23/EC of 29 May 1997 on Pressure Equipment. bar CMF010 (2) 29 CMF CMF CMF CMF CMF CMF bar CMF010 (2) 38 CMF CMF CMF CMF CMF CMF Pressure ratings at 25 C, according to ASME B31.3. For higher operating temperatures, pressure needs to be derated as follows: Flow tubes Flow tubes Housing 316L sensors nickel alloy sensors all sensors All sensors 94 to 148 C none 2% derating none 149 to 204 C 7,2% derating 9,2% derating 7,2% derating High-temperature CMF300A 205 to 260 C 13,8% derating not applicable 11,4% derating 261 to 316 C 19,2% derating not applicable 16,2% derating 317 to 343 C 20,1% derating not applicable 18,0% derating (2) Optional rupture disks for high-pressure CMF010 will burst if pressure inside sensor housing reaches 27 bar. (3) Housing pressure rating for 10 hours or less, according to ASME B31.3. Micro Motion ELITE Meters 7

8 Performance specifications continued Typical accuracy, turndown, and pressure drop in mass with 1700/2700 transmitter or direct host CMF010N CMF010M CMF025 2,5 2,0 1,5 100:1 20:1 10:1 1:1 Turndown 500:1 100:1 20:1 10:1 1:1 Accuracy (±%) liquid 1,25 0,25 0,10 0,10 0,10 gas 3,35 0,65 0,35 0,35 0,35 Pressure drop liquid (bar) ~0 ~0 0,01 0,01 1,0 Accuracy, % 1,0 0,5 0 0,5 1,0 gas (bar) ,01 0,88 1,5 liquid 2,0 gas 2, Nominal flow rate, % CMF010P CMF050 CMF100 CMF200 CMF300 Turndown 500:1 100:1 20:1 10:1 1:1 Accuracy (±%) liquid 2,40 0,50 0,10 0,10 0,10 gas 7,35 1,50 0,35 0,35 0,35 Pressure drop liquid (bar) ~0 ~0 0,01 0,01 0,93 gas (bar) 0 0 0,01 0,02 0,97 Accuracy, % 2,5 2,0 1,5 1,0 0,5 0 0,5 1,0 1,5 2,0 2,5 100:1 20:1 10:1 liquid gas 1: Nominal flow rate, % To determine accuracy, turndown, and pressure drop using your process variables, contact your local Micro Motion representative. 8 Micro Motion ELITE Meters

9 Performance specifications continued Typical accuracy, turndown, and pressure drop in mass with 1700/2700 transmitter or direct host CMF400 Turndown 500:1 100:1 20:1 10:1 1:1 Accuracy (±%) liquid 5 1,0 0,20 0,10 0,10 gas 16,25 3,25 0,65 0,35 0,35 Pressure drop liquid (bar) ~0 ~0 <0,01 0,01 1,0 gas (bar) <0,01 1,0 Accuracy, % 2,5 2,0 1,5 1,0 0,5 0 0,5 100:1 20:1 10:1 1:1 1,0 1,5 liquid 2,0 gas 2, Nominal flow rate, % To determine accuracy, turndown, and pressure drop using your process variables, contact your local Micro Motion representative. Micro Motion ELITE Meters 9

10 Functional specifications Environmental effects Process temperature effect Process temperature effect is defined as the worst-case zero offset due to process fluid temperature change away from the zeroing temperature for flow rate and calibration temperature for density. Process temperature effect % of nominal flow rate per C density accuracy per C CMF010 ±0,00025 ±0,015 kg/m 3 CMF025 ±0,00025 ±0,015 kg/m 3 CMF050 ±0,00025 ±0,015 kg/m 3 CMF100 ±0,00025 ±0,015 kg/m 3 CMF200 ±0,001 ±0,015 kg/m 3 CMF300 ±0,001 ±0,015 kg/m 3 CMF400 ±0,001 ±0,015 kg/m 3 Pressure effect Pressure effect is defined as the change in sensor flow due to process pressure change away from the calibration pressure. Pressure effect can be corrected. Pressure effect on flow accuracy % of rate per bar CMF010 none CMF025 none CMF050 none CMF100 0,003 CMF200 0,012 CMF300 0,009 CMF400 0,15 Power supply for CMF400 booster amplifier Input voltage Maximum current 85 to 265 VAC, 50/60 Hz 0,5 A Maximum power 50 watts Nominal flow rate is the upper limit of the nominal flow range. 10 Micro Motion ELITE Meters

11 Functional specifications continued Hazardous area classifications UL is a U.S.A. approvals agency, CSA is a Canadian approvals agency that provides approvals accepted both in the U.S.A. and in Canada. CENELEC and ATEX are European standards organizations, and SAA is an Australian approvals agency. UL and CSA Class I, Div. 1, Groups C and D Class I, Div. 2, Groups A, B, C, and D Class II, Div.1, Groups E, F, and G SAA CMF025 Ex ib IIC T5 CMF050 Ex ib IIC T5 CMF100 Ex ib IIC T6 CMF200 Ex ib IIB T6 CMF300 Ex ib IIB T6 ATEX (2) sensors with core processor except CMF400 CMF010, CMF025, CMF050, CMF100 CE 0575 II 2G EEx ib IIC T1...T5 CMF200, CMF300 CE 0575 II 2G EEx ib IIB T1...T5 sensors with junction box, except CMF300A and CMF400 CMF010, CMF025, CMF050, CMF100 CE 0575 II 2G EEx ib IIC T1...T6 CMF200, CMF300 CE 0575 II 2G EEx ib IIB T1...T6 max. ambient temp. ( C) max. ambient temp. ( C) de-rate at slope = -,093 C ambient per C fluid T5 T4 T3 T1-T2 sensor fluid temp. ( C) T6 T5 T4 T3 T1-T sensor fluid temp. ( C) CMF300A CE 0575 II 2G EEx ib IIB T1...T6 max. ambient temp. ( C) 55 T6 T5 T4 T3 T2 T sensor fluid temp. ( C) Standard-temperature model only. CMF300A high-temperature model is not SAA approved. (2) ATEX "T" rating depends on the maximum temperature shown in the graphs above. Ambient temperature limits are 20 C and 55 C for all sensors except CMF400. CMF400 ambient temperature limits are -40 C to 60 C. Micro Motion ELITE Meters 11

12 Functional specifications continued Hazardous area classifications continued CENELEC CMF400 with integral booster amplifier and integral core processor EEx de[ib] ibiib T1...T5 max. ambient temp. ( C) T1-T5 sensor fluid temp. ( C) CMF400 with integral booster amplifier and junction box EEx de[ib] ibiib T1...T6 max. ambient temp. ( C) T1-T6 sensor fluid temp. ( C) CMF400 with remote booster amplifier EEx de[ib] ibiib T1...T6 max. ambient temp. ( C) T6 T5 T4 T3 T1- T sensor fluid temp. ( C) CENELEC "T" rating depends on the maximum temperature shown in the graphs above. Ambient temperature limits are 20 C and 55 C for all sensors except CMF400. CMF400 ambient temperature limits are -40 C to 60 C. 12 Micro Motion ELITE Meters

13 Physical specifications Materials of construction Wetted parts Housing Junction box Core processor not available with CMF300A Booster amplifier housing (for CMF400 only) Stainless steel Nickel alloy CMF L or 304L Inconel alloy 686 CMF L or 304L Hastelloy C-22 CMF L or 304L Hastelloy C-22 CMF L or 304L Hastelloy C-22 CMF L or 304L Hastelloy C-22 CMF L or 304L Hastelloy C-22 High-temperature CMF300A 316L not available CMF L not available 304L stainless steel Epoxy-coated aluminum 316L stainless steel Epoxy-coated aluminum Weight (2) With junction box With core processor kg kg CMF CMF CMF CMF CMF CMF CMF400 with integral booster amplifier CMF400 with remote booster amplifier (sensor only) Remote booster amplifier 6 7 General corrosion guides do not account for cyclical stress, and therefore should not be relied upon when choosing a wetted material for your Micro Motion sensor. Please refer to Micro Motion s corrosion guide for proper material compatibility information. (2) Weight of sensor with ANSI 150 lb weld neck raised face flanges. Micro Motion ELITE Meters 13

14 CMF010 dimensions Dimensions in mm CMF010 with core processor FLOW 84 2x 40 temperature extender option 205 2x 1/2" 14 NPT female purge fitting (optional) Ø /2" 14 NPT female or M20 x 1,5 female CMF010 with junction box FLOW 2x 40 temperature extender option x 1/2" 14 NPT female purge fitting (optional) Ø /4" 14 NPT female CMF010 with core processor or junction box Back view with union fittings Side view with rupture disk Flange dimensions 2x 35 Dim. A face to face ± Dim. A face to face ± x 8 thru 180 Dim. Ø B 2x rupture disks (optional) Micro Motion ELITE Meters

15 CMF010 process fittings Fittings for 316L stainless steel sensors Fitting code Dim. A (mm) Face-to-face Dim. B (mm) Outside diam. 1/2-inch 150 lb ANSI weld neck raised face flange /2-inch 300 lb ANSI weld neck raised face flange /2-inch 600 lb ANSI weld neck raised face flange /2-inch sanitary fitting mm DIN PN40 weld neck, DIN 2635, type C face mm DIN PN100 weld neck, DIN 2637, type E face /4-inch NPT female union fitting /4-inch tube compression fitting mm tube compression fitting Fittings for 304L stainless steel sensors 1/2-inch 150 lb ANSI weld neck raised face flange /2-inch 300 lb ANSI weld neck raised face flange mm DIN PN40 weld neck, DIN 2635 type C face Fittings for nickel alloy sensors 1/2-inch 150 lb ANSI lap joint flange /2-inch 300 lb ANSI lap joint flange mm DIN PN40 lap joint, DIN /4-inch NPT female union fitting Fittings for high-pressure sensors 1/4-inch NPT female union fitting /4-inch tube compression fitting mm tube compression fitting Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. Micro Motion ELITE Meters 15

16 CMF025 dimensions Dimensions in mm CMF025 with core processor FLOW 84 2X 1/2" 14 NPT purge fitting (optional) 2X 58 temperature extender option 246 Ø /2" 14 NPT female or M20 X 1,5 female CMF025 with junction box FLOW 2x X 1/2" 14 NPT purge fitting (optional) temperature extender option 246 Ø /4" 14 NPT female CMF025 with core processor or junction box Back view with wafer style fittings Back view with union fittings Flange dimensions Dim A ±3 Dim. Ø B 24 2X 46 Dim. A face to face ±3 Dim. A face to face ±3 1/2" NPT female Dim. B Micro Motion ELITE Meters

17 CMF025 process fittings Fittings for 316L stainless steel sensors Fitting code Dim. A (mm) Face-to-face Dim. B (mm) Outside diam. Wafer style, 1/2" ANSI (150 lb, 300 lb, 600 lb bolt kit) Wafer style, 15 mm DIN 2635, type C facing (PN40 bolt kit) Wafer style, 15 mm DIN 2635, type N grooved facing (PN40 bolt kit) Wafer style, 15 mm DIN 2637, type E facing (PN100 bolt kit) Wafer style, 15 mm DIN 2637, type N grooved facing (PN100 bolt kit) /2" ANSI 150 lb weld neck raised face flange /2" ANSI 300 lb weld neck raised face flange /2" ANSI 600 lb weld neck raised face flange /2" NPT female union fitting /2" sanitary fitting mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing Fittings for 304L stainless steel sensors 1/2" ANSI 150 lb weld neck raised face flange /2" ANSI 300 lb weld neck raised face flange mm DIN PN40 weld neck, DIN 2635 type C face Fittings for nickel alloy sensors 1/2" ANSI 150 lb lap joint flange /2" ANSI 300 lb lap joint flange mm DIN PN40 lap joint flange, DIN Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. Micro Motion ELITE Meters 17

18 CMF050 dimensions Dimensions in mm CMF050 with core processor FLOW 111 2X 63 temperature extender option 313 2X 1/2" 14 NPT purge fitting (optional) Ø /2" 14 NPT female or M20 X 1,5 female CMF050 with junction box FLOW 111 2X 63 temperature extender option 305 2X 1/2" 14 NPT purge fitting (optional) Ø /4" 14 NPT female Back view with wafer style fittings CMF050 with core processor or junction box 55 Back view with union fittings 225 Flange dimensions Dim. A ±3 24 2X 49 Dim. A face to face ±3 Dim. A face to face ±3 Dim. Ø B Dim. B 3/4" NPT female Micro Motion ELITE Meters

19 CMF050 process fittings Fittings for 316L stainless steel sensors Fitting code Dim. A (mm) Face-to-face Dim. B (mm) Outside diam. Wafer style, 1/2" ANSI (150 lb, 300 lb, 600 lb bolt kit) Wafer style, 15 mm DIN 2635, type C facing (PN40 bolt kit) Wafer style, 15 mm DIN 2635, type N grooved facing (PN40 bolt kit) Wafer style, 15 mm DIN 2637, type E facing (PN100 bolt kit) Wafer style, 15 mm DIN 2637, type N grooved facing (PN100 bolt kit) /2" ANSI 150 lb weld neck raised face flange /2" ANSI 300 lb weld neck raised face flange /2" ANSI 600 lb weld neck raised face flange /4" NPT female union fitting /4" sanitary fitting mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing Fittings for 304L stainless steel sensors 1/2" ANSI 150 lb weld neck raised face flange /2" ANSI 300 lb weld neck raised face flange mm DIN PN40 weld neck, DIN 2635 type C face Fittings for nickel alloy sensors 1/2" ANSI 150 lb lap joint flange /2" ANSI 300 lb lap joint flange mm DIN PN40 lap joint flange, DIN Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. Micro Motion ELITE Meters 19

20 CMF100 dimensions Dimensions in mm CMF100 with core processor FLOW 2X X 1/2" 14 NPT purge fitting (optional) temperature extender option Ø /2" 14 NPT female or M20 X 1,5 female CMF100 with junction box FLOW 2X X 1/2" 14 NPT female purge fitting (optional) temperature extender option 409 Ø 32 3/4" 14 NPT female Back view with wafer style fittings Dim. A ±3 Dim. Ø B 33 Flange dimensions Dim. A face to face ±3 Dim. B Micro Motion ELITE Meters

21 CMF100 process fittings Fittings for 316L stainless steel sensors Fitting code Dim. A (mm) Face-to-face Dim. B (mm) Outside diam. Wafer style, 1" ANSI (150 lb bolt kit) Wafer style, 1" ANSI (300 lb, 600 lb bolt kit) Wafer style, 25 mm DIN 2635, type C facing (PN40 bolt kit) Wafer style, 25 mm DIN 2635, type N grooved facing (PN40 bolt kit) Wafer style, 25 mm DIN 2637, type E facing (PN100 bolt kit) Wafer style, 25 mm DIN 2637, type N grooved facing (PN100 bolt kit) " ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange " ANSI 600 lb weld neck raised face flange /2" ANSI 600 lb weld neck raised face flange " sanitary fitting mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing Fittings for 304L stainless steel sensors 1" ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange mm DIN PN40 weld neck, DIN 2635 type C face Fittings for nickel alloy sensors 1" ANSI 150 lb lap joint flange " ANSI 300 lb lap joint flange mm DIN PN40 lap joint flange, DIN mm DIN PN40 lap joint flange, DIN Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. Micro Motion ELITE Meters 21

22 CMF200 dimensions Dimensions in mm CMF200 with core processor FLOW Ø 32 1/2" 14 NPT female or M20 X 1,5 female 2X 1/2" 14 NPT purge fitting (optional) temperature extender option 178 2X CMF200 with junction box FLOW Ø 32 3/4" 14 NPT female 2X 1/2" 14 NPT female purge fitting (optional) temperature extender option 178 2X Back view and flange dimensions Dim. A ±3 38 Dim. Ø B Micro Motion ELITE Meters

23 CMF200 process fittings Fittings for 316L stainless steel sensors Fitting code Dim. A (mm) Face-to-face Dim. B (mm) Outside diam. 1 1/2" ANSI 150 lb weld neck raised face flange /2" ANSI 300 lb weld neck raised face flange /2" ANSI 600 lb weld neck raised face flange " ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange " ANSI 600 lb weld neck raised face flange /2" sanitary fitting " sanitary fitting mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing Fittings for 304L stainless steel sensors 1 1/2" ANSI 150 lb weld neck raised face flange /2" ANSI 300 lb weld neck raised face flange " ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange mm DIN PN40 weld neck, DIN 2635, type C face mm DIN PN40 weld neck, DIN 2635, type C face Fittings for nickel alloy sensors 1 1/2" ANSI 150 lb lap joint flange /2" ANSI 300 lb lap joint flange " ANSI 150 lb lap joint flange " ANSI 300 lb lap joint flange mm DIN PN40 lap joint flange, DIN mm DIN PN40 lap joint flange, DIN Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. Micro Motion ELITE Meters 23

24 CMF300 dimensions Dimensions in mm CMF300 with core processor FLOW Ø 32 1/2" 14 NPT female or M20 X 1.5 female 2X 1/2" 14 NPT purge fitting (optional) temperature extender option X FLOW CMF300 with junction box Ø 32 3/4" 14 NPT female 2X 1/2" 14 NPT female purge fitting (optional) temperature extender option X Back view and flange dimensions Dim. A ±3 84 Dim. Ø B Micro Motion ELITE Meters

25 CMF300 process fittings Fittings for 316L stainless steel sensors Fitting code Dim. A (mm) Face-to-face Dim. B (mm) Outside diam. 3" ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange " ANSI 600 lb weld neck raised face flange " ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange " ANSI 600 lb weld neck raised face flange " sanitary fitting mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing Fittings for 304L stainless steel sensors 3" ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange mm DIN PN40 weld neck, DIN 2635, type C face Fittings for nickel alloy sensors 3" ANSI 150 lb lap joint flange " ANSI 300 lb lap joint flange mm DIN PN40 lap joint flange, DIN Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. Micro Motion ELITE Meters 25

26 High-temperature CMF300A dimensions and process fittings Dimensions in mm FLOW 1163 Dim. A face to face ±3 84 Junction box Dim. B 976 2X 1/2" NPT female purge fitting (optional) 2X 279 Remote-mount junction box 2X flexible conduit Minimum bend radius: X Ø 6 thru for mounting 1/2" NPT female Fittings Fitting code Dim. A (mm) Face-to-face Dim. B (mm) Outside diam. 3" ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange " ANSI 600 lb weld neck raised face flange " ANSI 900 lb weld neck raised face flange " ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange " ANSI 600 lb weld neck raised face flange " ANSI 900 lb weld neck raised face flange mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N grooved facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N grooved facing Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. 26 Micro Motion ELITE Meters

27 CMF400 dimensions Dimensions in mm CMF400 with integrally mounted booster amplifier and core processor 183 normal flow direction Dim. A ±5 137 Dim. øb 250 includes 33 mm clearance for cover removal 165 3/4"-14 NPT female* 971 1/2"-14 NPT female or M20 x 1, *Note: Adapters available in 1/2"-14 NPT female or M20 x 1,5 for CENELEC-approved models CMF400 with integrally mounted booster amplifier and junction box normal flow direction Dim. A ± Dim. øb 250 includes 33 mm clearance for cover removal /4"-14 NPT female* 3/4"-14 NPT female *Note: Adapters available in 1/2"-14 NPT female or M20 x 1,5 for CENELEC-approved models Micro Motion ELITE Meters 27

28 CMF400 dimensions and process fittings Dimensions in mm CMF400 for remotely mounted booster amplifier normal flow direction 2x 350 Dim. A ± includes 33 mm clearance for cover removal Dim. øb 971 3/4"-14 NPT female* *Note: Adapters available in 1/2"-14 NPT female or M20 x 1,5 for CENELEC-approved models Fittings Fitting code Dim. A (mm) Face-to-face Dim. B (mm) Outside diam. 4" ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange " ANSI 600 lb weld neck raised face flange " ANSI 150 lb weld neck raised face flange " ANSI 300 lb weld neck raised face flange " ANSI 600 lb weld neck raised face flange mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N facing mm DIN PN40 weld neck, DIN 2635, type C facing mm DIN PN40 weld neck, DIN 2635, type N facing mm DIN PN100 weld neck, DIN 2637, type E facing mm DIN PN100 weld neck, DIN 2637, type N facing Fittings listed here are standard options. Other types of fittings are available. Contact your local Micro Motion representative. 28 Micro Motion ELITE Meters

29 CMF400 remote booster amplifier Dimensions in mm Remote mount booster amplifier with core processor 3 meter of cable supplied by Micro Motion 2 1/2"-14 NPT female or M20 x 1, /4"-14 NPT female* 210 2x x 5 80 includes 33 mm clearance for cover removal 2x wall mount 2x 36 2x x ø9 thru ø50 pole mount *Note: Adapters available in 1/2"-14 NPT female or M20 x 1,5 for CENELEC-approved models Remote mount booster amplifier with junction box meter of cable supplied by Micro Motion 3/4"-14 NPT female or M20 x 1,5 76 3/4"-14 NPT female* x 124 2x 5 80 includes 33 mm clearance for cover removal 2x wall mount 38 ø50 pole mount 2x 36 2x x ø9 thru *Note: Adapters available in 1/2"-14 NPT female or M20 x 1,5 for CENELEC-approved models Micro Motion ELITE Meters 29

30 Ordering information ELITE sensor model number matrix Model CMF010 CMF025 CMF050 CMF100 CMF200 CMF300 CMF400 Code M L H N A P Sensor Model ELITE 3 mm sensor ELITE 6 mm sensor ELITE 15 mm sensor ELITE 25 mm sensor ELITE 50 mm sensor ELITE 80 mm sensor ELITE 100 mm sensor Pressure, temperature and wetted material Standard pressure, standard temperature, 316L stainless steel Standard pressure, standard temperature, 304L stainless steel not available with CMF400 Standard pressure, standard temperature, Nickel Alloy Not available with CMF010 or CMF400 Standard pressure, standard temperature, Inconel 686 CMF010 only Standard pressure, high temperature, 316L stainless steel CMF300A High pressure, standard temperature, Inconel 686 nickel alloy and 316L stainless steel CMF010 only Code Process Connections ### See fittings tables on pages Code Case Options N Standard pressure containment P Purge fittings (two 1/2-inch NPT female, not available with CMF400) D Rupture disks (two 28 bar disks) CMF010 with pressure/material code P only Code Electronics Interface A Local core processor for remotely mounted Series 1000/2000 not available with CMF300A or CMF400 B Local core processor with extended mount for remotely mounted Series 1000/2000 transmitter not available with CMF300A or CMF400 D MVDSolo; local core processor for direct host connections (for OEM s) E MVDSolo; local core processor with extended mount for direct host connection (for OEM s) not available with CMF300A or CMF400 R 9 wire junction box not available with CMF400 H 9-wire junction box with extended mount not available with CMF300A or CMF400 For CMF400 only K Integral Booster Amp with local core processor to remote mount Series 1000/2000 transmitters L Integral Booster Amp with MVDSolo, local core processor for direct host connection (for OEM's) M Integral Booster Amp with 9 wire junction box N Remote Booster Amp with local core processor to remote mount Series 1000/2000 transmitters O Remote Booster Amp with MVDSolo, local core processor for direct host connection (for OEM's) P Remote Booster Amp with 9 wire junction box Code Conduit Connections Electronics Interface Codes 'A', B, D, E, 'K', 'L', 'N' and 'O' (local core processor) B 1/2 inch NPT no gland C 1/2 inch NPT with brass nickel cable gland (cable dia. 8,5 mm to 10 mm) D 1/2 inch NPT with stainless steel cable gland (cable dia. 8,5 mm to 10 mm) E M20-no gland F M20 brass nickel cable gland (cable dia. 8,5 mm to 10,0 mm) G M20 stainless steel cable gland (cable dia. 8,5 mm to 10,0 mm) continued on next page 30 Micro Motion ELITE Meters

31 Ordering information (continued) ELITE sensor model number matrix (continued) Code Conduit connections (continued) Electronics Interface Code 'R', H, 'M' and 'P' (9-wire junction box) A 3/4" NPT no gland H 3/4" NPT with brass nickel gland J 3/4" NPT with stainless steel gland Code Approvals (for all sensor types) M Micro Motion Standard (no approval) N Micro Motion standard/ped compliant U UL Z ATEX Equipment Category 2 (Zone 1)/PED compliant (CENELEC Increased Safety/PED compliant CMF400 only) F CENELEC Flameproof/PED compliant (CMF400 only) Code Language A Danish Quick Reference and English Manual D Dutch Quick Reference and English Manual E English Quick Reference and English Manual F French Quick Reference and French Manual G German Quick Reference and German Manual H Finnish Quick Reference and English Manual I Italian Quick Reference and English Manual N Norwegian Quick Reference and English Manual P Portugese Quick Reference and English Manual S Spanish Quick Reference and Spanish Manual W Swedish Quick Reference and English Manual Code Connection to Booster Amp - CMF400 only A 3/4-inch NPT conduit opening B M20 Brass Nickel Adapter (2) C M20 Stainless Steel Adapter (2) D 1/2-inch NPT Brass Nickel Adapter (2) E 1/2-inch NPT Stainless Steel Adapter (2) Code Measurement Application Software Z None A API (3) Code Future Options Z Reserved for future use - not available on CMF400 Typical Model Number: CMF010M 313 N A B U E Z Z Safe area, no approvals (2) CENELEC approval only (3) Available with electronics interfaces D, E, L, and O. For all others, order with Model 2700 transmitter. Micro Motion ELITE Meters 31

32 Visit us on the Internet at Toll-free numbers (UK only) Tel / Fax Due to Micro Motion's commitment to continuous improvement of our products, all specifications are subject to change without notice. Micro Motion, ELITE, and MVD are registered trademarks of Micro Motion, Inc., Boulder, Colorado. Plantweb is a registered trademark, and Fisher-Rosemount is a trademark of Fisher-Rosemount, Clayton, Missouri. HART is a registered trademark of the HART Communication Foundation, Austin, Texas. Modbus is a registered trademark of Schneider Automation, Inc., North Andover, Massachusetts. Foundation is a trademark of the Fieldbus Foundation, Austin, Texas. Hastelloy is a registered trademark of Haynes International, Inc., Kokomo, Indiana. Inconel is a registered trademark of Inco Alloys International, Inc., Huntington, West Virginia. Emerson Process Management Fisher-Rosemount Flow Groeneveldselaan AZ Veenendaal The Netherlands Tel +31 (0) Fax +31 (0) Toll-free numbers (UK only) Tel Fax Customer Service Tel +31 (0) Fax +31 (0) , Micro Motion, Inc. All rights reserved PS (03/02)