Etaline MN. In-line Pumps
|
|
- Annabelle Ford
- 5 years ago
- Views:
Transcription
1 Type Series Booklet /05--EN Etaline In-line Pumps Automation products available: Hyamaster hyatronic Fields of Application F Heating systems F Air-conditioning systems F Cooling circuits F Service water supply systems F Water supply systems F Industrial recirculation systems Fluid Pumped Liquids not chemically or mechanically aggressive to the pump materials (see list of fluids pumped on page 6). Operating Data Q upto550m 3 /h, 153 l/s H upto90m t --30 C to +140 C p d up to 16 bar 1 ) 1 ) The sum of inlet pressure and shutoff head must not exceed the value indicated Designation Etaline G N / Type series Material combination N = with stub shaft and standardised motor Pump size Nom. dia. suction/discharge nozzle Approx. impeller diameter Motor rating in kw x 10 (example: 4.0 kw) Number of poles Code for turned-down impeller Design Close-coupled in-line pump, with standardised motor. The pump shaft is rigidly connected to the motor shaft. 2 Etaline pumps connected by two Y-pipes constitute a twin pump. Shaft Seal Uncooled mechanical seal, for ex. silicon carbide/silicon carbide, special elastomers or EP rubber. Other variants as indicated in the list of media pumped. Materials Etaline GN Etaline MN Volute casing Cast iron JL ) Cast iron JL ) Discharge cover Cast iron JL ) Cast iron JL ) Impeller Cast iron JL ) Tin bronze Casing wear rings Cast iron JL ) Bronze Shaft Tempered steel C 45 Tempered steel C 45 Shaft sleeve Chrome nickel Chrome nickel molybdenum steel molybdenum steel Drive lantern Cast iron JL ) Cast iron JL ) Y-pipes Cast iron JL ) -- 2 ) to EN 1561 GJL-250 (formerly GG-25) Drive Surface-cooled three-phase squirrel-cage motor, up to 2.2 kw 230/400 V, 3 kw and above 400/690 V, IP 55, insulation class F. Units with integrated speed adjustment are described in the Etaline Pump-Drive Type Series Booklet Bearings Grease-lubricated deep-groove ball bearings.
2 Product Information as per Regulation No. 547/2012 (for Water Pumps with a Maximum Shaft Power of 150 kw) Implementing Ecodesign Directive 2009/125/EC -- Minimum efficiency index: see data sheet -- The benchmark for most efficient water pumps is MEI Year of construction: see data sheet -- Manufacturer s name or trade mark, commercial registration number and place of manufacture: see data sheet or order documentation -- Product s type and size identificator: see data sheet -- Hydraulic pump efficiency (%) with trimmed impeller: see data sheet -- Pump performance curves, including efficiency characteristics: see documented characteristic curve -- The efficiency of a pump with a trimmed impeller is usually lower than that of a pump with the full impeller diameter. The trimming of the impeller will adapt the pump to a fixed duty point, leading to reduced energy consumption. The minimum efficiency index (MEI) is based on the full impeller diameter. -- The operation of this water pump with variable duty points may be more efficient and economic when controlled, for example, by the use of a variable speed drive that matches the pump duty to the system. -- Information relevant for disassembly, recycling or disposal at end of life: see installation/ operating manual -- Information on benchmark efficiency or benchmark efficiency graph for MEI = 0.7 (0.4) for the pump based on the model shown in the Figure are available at: 2
3 n 2900 rpm n 1450 rpm 3
4 n 2900 rpm Etaline Motor Single pumps 400 V Size kw A kg / / / S / S / L / L / L / M / S / S / S / L / L / L / M / M / S / S / S / S / M / M / M / M / L / S / L / L / M / M / S / S / S / M / M / M / L / L / M / L / L / L / L / M / M / S / S / S / S / M / S / M / M / M / M / L / L / M / M / L Etaline Motor Single pumps 400 V Size kw A kg / M / S / S / S / S / S / M / M / M / L / M / L / L / M / S / S / S / M / M / M / M / M / M / L / L / M
5 n 1450 rpm Etaline Motor Single pumps Twin pumps 1 ) 400 V Size kw A kg kg / / / / / / / / / S / / / / / / / S / L / L / L / L / / / / / / / S / S / L / L / L / L / L / / / / / / / / S / S / L / L / L / L / L / L / M / / / / S / S / L Etaline Motor Single pumps Twin pumps 1 ) 400 V Size kw A kg kg / L / L / L / L / M / L / L / L / M / S / / S / L / L / L / L / L / L / M / M / S / S / S / M / M / M / M / M / L / M / S / M / M / M / L / M / M / L / L / L / M / M / L / L / M / L / L / L / L / L / S / S / M / M ) consisting of: 2 Etaline pumps, 1 suction-side Y-pipe without changeover flap, 1 discharge-side Y-pipe with changeover flap, screws, bolts and seal elements. Pumps and Y-pipes are supplied in separate packages. For the two Y-pipes friction losses equivalent to those of approx. 9 m of straight pipe have to be taken into account. 5
6 Etaline GN with bolted-on discharge cover In-line design for easy installation and simple piping layout CanbefittedwithY-pipe for use as twin pump Impeller with optimised hydraulics, excellent efficiencies Pressure-boundary designed for 16 bar to achieve high operating reliability Standardised motor for all voltages and frequencies, 2-pole or 4-pole design Service-friendly casing wear rings Service-friendly shaft sleeve of chrome nickel molybdenum steel Mechanical seal, uncooled and maintenance-free 6
7 List of Media Pumped Fluid pumped Application limits Materials Casing/Impeller Mechanical Seal Variant code Comments Grey Cast iron/ Grey Cast iron Grey Cast iron Tin Bronze AQ4EGG 2) U3U3VGG Q1Q1X4GG BQ1EGG 2) GN MN Water 1 ) Service water t<110 C, p < 10 bar j j GN 10 Heating water 4 ) t<120 C, p < 10 bar J J GN 11 Heating water 4 ) t<140 C, p < 16 bar J J GN 6 Heating water 4 ) t<110 C, p < 10 bar j j GN 10 If used as circulating pump as per DIN 4752; p max <10 bar Condensate 3 ) t<120 C, p < 10 bar J J GN 11 Provide open loop circuit MN 11 (processing via product number) Cooling water (without antifreeze agent) Cooling water ph value >7.5 (with antifreeze agent) 5 ) t<60 C, p < 10 bar j j GN 10 Provide open-loop circuit MN 10 t>-- 30 C, p < 10 bar t<110 C J J GN 11 Slightly contaminated water t<60 C, p < 10 bar j j GN 10 Clean water 3 ) t<60 C, p < 10 bar J J GN 11 Untreated water t<60 C, p < 10 bar j j GN 10 Swimming pool water, fresh water t<60 C, p < 10 bar j j GN 10 In case of requirements as per DIN 19643, provide MN 10 (processing via product number) Drinking water t<60 C, p < 10 bar j j MN 11 Partly desalinated water t<120 C, p < 10 bar J J GN 11 Refrigerants, cooling brines Cooling brine, inorganic ph >7.5, inhibited Water with antifreeze agent ph >7.5 2 ) Oils / emulsions t>-- 30 C, p < 10 bar t<25 C t>-- 30 C, p < 10 bar t<110 C J J GN 11 J J GN 11 Boring/grinding emulsion t<60 C, p < 10 bar j j GN 9 Oil / water emulsion t<60 C, p < 10 bar j j GN 9 Cleaning agents Degreasing/ cleaning solutions ph 7 to 14 t<90 C, p < 10 bar j j GN 10 Bottle rinsing lyes t<90 C, p < 10 bar j j GN 10 J = Standard j = Prices and delivery times upon request Selection example: Given: clean water of 20 C;Q=60m 3 /h, H = 28 m Found: Etaline GN /752.2 GN 11 Pump size as per selection chart Variant code G = pump casing and impeller made of JL ) N = stub shaft variant with standardised motor 11 = mechanical seal materials BQ1EGG (as per DIN ) 1 ) General evaluation criteria for water analysis: ph value > 7; content of chlorides (Cl)<250 mg/kg, chlorine (Cl 2 )<0.6 mg/kg. 2 ) Antifreeze agent on ethylene glycol basis with inhibitors. Content >20 to 50 % (for example, Antifrogen N) 3 ) No ultrapure water: conductivity at 25 C: <800 ms/cm; chemically neutral to corrosion 4 ) For heating water we recommend application of the VDI 2035 or Vd TÜV 1466 standards, otherwise a reduced service life of the mechanical seal may be the consequence. Mechanical seal material codes: U3 = tungsten carbide (hard metal) B = carbon, resin-impregnated Q1 = silicon carbide G = CrNiMo steel V = fluorocarbon rubber (Viton) X4 = special elastomer E = EP rubber 5 ) to EN 1561 GJL-250 (formerly GG-25) 7
8 Etaline Etaline n 2900 rpm Etaline Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 8
9 Etaline Etaline n 2900 rpm Etaline Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 9
10 Etaline Etaline n 2900 rpm Etaline Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 10
11 Etaline Etaline n 2900 rpm Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 11
12 Etaline Etaline n 1450 rpm Etaline Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 12
13 Etaline Etaline n 1450 rpm Etaline Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 13
14 Etaline Etaline n 1450 rpm Etaline Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 14
15 Etaline Etaline n 1450 rpm Etaline Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 15
16 Etaline Etaline n 1450 rpm Etaline Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 16
17 Etaline Etaline n 1450 rpm Etaline NPSH + 0,5 m Sicherheitszuschlag / security margin / marge de sécurité / margine di sicurezza / zekerheidsmarge 17
18 n 2900 rpm Etaline GN, MN View Y Foundation fixing elements Pump fixing elements Foundation fixing elements Foundation fixing elements for 4 bolts M12 Tolerance of connecting dimensions as per EN 735 Etaline DN 1) a b 1 b 2 d 1 d 2 d 3 p h 1 h 2 I 1 I 2 t x w 1M.1/.2 2) 6B.1 2) 6B.2 2) 6B.3 2) 6D.1 2) 6D.2 2) m o / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / x 18 Clearance for removal 1 M.1/.2 Pressure gauge connections 5B Ventilation -- special design for vertical installation 6 B.1/.2/.3 Pumped liquid drain 6 D.1/.2 Pumped liquid venting 1 ) DN = EN , PN 16 2 ) Rc = ISO 7/1 Pump sizes Etaline /... to /... are fixed by three steel angle feet. Pump sizes Etaline /... to /... are fixed by cast iron pump foot (EN-GJL).
19 n 2900 rpm Etaline GN, MN View Y Foundation fixing elements Pump fixing elements Foundation fixing elements Foundation fixing elements for 4 bolts M12 Tolerance of connecting dimensions as per EN 735 Etaline DN 1) a b 1 b 2 d 1 d 2 d 3 p h 1 h 2 I 1 I 2 t x w 1M.1/.2 2) 6B.1 2) 6B.2 2) 6B.3 2) 6D.1 2) 6D.2 2) m o / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 /
20 n 1450 rpm Etaline GN, MN View Y Foundation fixing elements Pump fixing elements Foundation fixing elements Foundation fixing elements for 4 bolts M12 Tolerance of connecting dimensions as per EN 735 Etaline DN 1) a b 1 b 2 d 1 d 2 d 3 p h 1 h 2 I 1 I 2 t x w 1M.1/.2 2) 6B.1 2) 6B.2 2) 6B.3 2) 6D.1 2) 6D.2 2) m o b 3 b 4 b 5 h 3 h 4 h / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / x Clearance for removal 1 M.1/.2 Pressure gauge connections 5B Ventilation -- special design for vertical installation 6 B.1/.2/.3 Pumped liquid drain 6 D.1/.2 Pumped liquid venting 1 ) DN = EN , PN 16 2 ) Rc = ISO 7/1 Pump sizes Etaline /... to /... are fixed by three steel angle feet. Pump sizes Etaline /... to /... are fixed by cast iron pump foot (EN-GJL). 20
21 n 1450 rpm Etaline GN, MN View Y Foundation fixing elements Pump fixing elements Foundation fixing elements Foundation fixing elements for 4 bolts M12 Tolerance of connecting dimensions as per EN 735 Etaline DN 1) a b 1 b 2 d 1 d 2 d 3 p h 1 h 2 I 1 I 2 t x w 1M.1/.2 2) 6B.1 2) 6B.2 2) 6B.3 2) 6D.1 2) 6D.2 2) m o b 3 b 4 b 5 h 3 h 4 h / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / / M Rc 3 / 8 Rc 3 / 8 -- Rc 3 / 8 Rc 3 / 8 Rc 3 / x Clearance for removal 1 M.1/.2 Pressure gauge connections 5B Ventilation -- special design for vertical installation 6 B.1/.2/.3 Pumped liquid drain 6 D.1/.2 Pumped liquid venting 1 ) DN = EN , PN 16 2 ) Rc = ISO 7/1 Pump sizes Etaline /... to /... are fixed by three steel angle feet. Pump sizes Etaline /... to /... are fixed by cast iron pump foot (EN-GJL). 21
22 n 1450 rpm Etaline GN, MN View Y Foundation fixing elements Pump fixing elements Foundation fixing elements Foundation fixing elements for 4 bolts M12 Tolerance of connecting dimensions as per EN 735 Etaline DN 1) a b 1 b 2 d 1 d 2 d 3 p h 1 h 2 I 1 I 2 t x w 1M.1/.2 2) 6B.1 2) 6B.2 2) 6B.3 2) 6D.1 2) 6D.2 2) m o b 3 b 4 b 5 h 3 h 4 h / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 -- Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / / M Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 / 2 Rc 1 /
23 support blind flange (accessory) Motors of size 180 and above of Etaline units with horizontal motor axis need to be supported. To this end, use the foot fixing holes on the motor housing. Pump sizes Etaline /.. to /.. are fixed by three angle feet Pump sizes Etaline /.. to /.. are fixed by a pump foot made of EN-GJL If expansion joints are used or if the pump set is installed with a pump foot, Etaline has to be fixed. The list of pump accessories includes appropriate fixing elements. When dismantling the motor the volute casing may remain in the piping. 23
24 9 Zugehörige Unterlagen Horizontal installation, direction of flow from bottom to top Vertical installation Horizontal installation; direction of flow from top to bottom. The pump casing/back pull--out unit must be turned by 180 so that the terminal box remains in its current position on the top. Horizontal installation (for example under the ceiling) The pumps can be directly installed in the piping in any position, but not with the motor pointing downwards. Twin pumps must not be arranged in flow direction from top to bottom, since under certain operating conditions the change-over flap will not shut off completely, which might produce reverse flow in the second pump. In this case, change-over from the first to the second pump might cause damage. 24
25 7.6 Ersatzteilehaltung Interchangeability of Etaline and Etabloc Components and Interchangeability of Components among Each Other Part designation Volute casing Discharge cover Shaft (with taper lock ring) Impeller Mechanical seal Casing wear ring suction side Casing wear ring discharge side Shaft sleeve Part No. Shaft unit Motor / Etaline 1 ) 112 Etabloc / f j j j j z z / / f 12 j j j j z z f / / f j j j j z z / / f 2 j j j z z f / / f j j j z z f / / f 2 j j j z z f / / f j j z z f / / f 2 j j z z f / / f 11 j j j z z / / f 9 j j 3 4 j z z f / / f 7 z z z 8 9 j j j z z f / / f 10 j j j z z f / / f 3 j j 3 4 j 6 j j z z / / f 3 j j 3 4 j j 7 j z z f / / f 4 z z z 8 9 j j j z z f / / f 5 z z z j 9 10 j j z z f / / f 4 z z z 8 j j 11 j z z f / / f 4 z z z j 9 j j z f / / f 5 z z z j j 10 j j z z f / / f 8 z z z j 9 10 j j z z f / / f 6 z z z j j j z z f / / f 13 z z z j j z z f / / f 14 z z z z z z z f / f j z Same number means same component Components differ In case of other frequencies and/or power reserves for this pump/motor combination please contact the manufacturer. This pump/motor combination is not possible Components interchangeable with those of Etabloc 1 ) Except for the volute casing, the pump components of single and twin Etaline pumps are identical. Motor Rating 71.../024,.../ /054,.../074,.../072,.../ /114,.../154,.../152,.../ /224,.../304,.../ /404,.../ /554,.../754,.../552,.../ /1104,.../1504,.../1102,.../1502,.../ /1854,.../2204,.../ /3004,.../3002,.../ /3704,.../4504,.../ /
26 Pump Accessories Pump foot for vertical installation Etaline /... to /... 1 ) Etaline /... to /... Y-pipes for twin pumps PN 16 DN 40 suction side consisting of: DN 40 discharge side suction-side Y-pipe without DN 50 suction side change-over flap, DN 50 discharge side discharge-side Y-pipe with DN 65 suction side change-over flap, DN 65 discharge side bolts, nuts and seal elements DN 80 suction side DN 80 discharge side DN 100 suction side DN 100 discharge side kg ) 3 pump feet with bolts Electric Accessories Setting range in A min -- max Back-up fuse kg E1 Switchgear MSD, IP 54, with manual-0-automatic selector switch, motor contactor with overcurrent relay. Operation and fault indicator lamps. 100 x 170 x 85 mm MSD 10.1 MSD 12.1 MSD 16.1 MSD 25.1 MSD 40.1 MSD 60.1 MSD 80.1 MSD A 4A 4A 6A 10 A 16 A 20 A 20 A E11 Control unit for single-pump stations, IP 54 LevelControl Basic 2 Direct starting with manual-0-automatic selector switch indicator lamps and control panel high water alert integrated alarm buzzer, 85 db(a) operating hours counter/switching cycles per pump voltage measurement, phase monitoring volt-free contact for general fault message. 230 V variant: with external socket optional: master switch optional: rechargeable battery for mains-independent alarm BC1 400 DFNO 010 BC1 400 DFNO 016 BC1 400 DFNO 025 BC1 400 DFNO 040 BC1 400 DFNO 063 BC1 400 DFNO A 25 A 25 A 25 A 25 A 25 A Dimensions (H x W x D) 400 x 278 x 120 mm for float switches including 4 20 ma input E12 Control unit for single-pump stations, IP 54 LevelControl Basic 2 Star-delta starting with manual-0-automatic selector switch indicator lamps and control panel high water alert integrated alarm buzzer, 85 db(a) operating hours counter/switching cycles per pump voltage measurement, phase monitoring volt-free contact for general fault message. optional: master switch optional: rechargeable battery for mains-independent alarm BS1 400 SFNO 140 BS1 400 SFNO 180 BS1 400 SFNO 230 BS1 400 SFNO 250 BS1 400 SFNO 400 BS1 400 SFNO A 25 A 25 A 35 A 50 A 80 A Dimensions (H x W x D) 400 x 300 x 155 mm for float switches including 4 20 ma input 26
Etaprime B Type Series Booklet
Self-priming Pump Etaprime B Type Series Booklet Legal information/copyright Type Series Booklet Etaprime B All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationSelf-priming Pump. Etaprime B. Type Series Booklet
Self-priming Pump Etaprime B Type Series Booklet Legal information/copyright Type Series Booklet Etaprime B All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationStandardised Water Pump. Etanorm. Type Series Booklet
Standardised Water Pump Etanorm Type Series Booklet Legal information/copyright Type Series Booklet Etanorm All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationWaste Water, Condensate and Heat Transfer Fluid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Fluid Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied,
More informationDesignation. Accessories Drive
Type Series Booklet + 60 Hz 275.5/9- G2 Etaprime L Self-priming Pumps for Pure or Contaminated Fluids Fields of Application Water supply Fire-fighting systems Sprinkling Irrigation Drainage Air-conditioning
More informationWaste Water, Condensate and Heat Transfer Liquid Pump. Type Series Booklet
Waste Water, Condensate and Heat Transfer Liquid Pump MK Type Series Booklet Legal information/copyright Type Series Booklet MK All rights reserved. The contents provided herein must neither be distributed,
More informationData sheet. Etaline GN /1852 G10 Version no.: 1 Inline pump. Operating data. Design. Requested developed head m
Data sheet Item no.: 2600 Page: 1 / 5 Operating data Requested flow rate 40.00 m ³/h Actual flow rate 40.00 m ³/h Requested developed head 68.00 m Actual developed head 68.00 m Pumped medium Water Efficiency
More informationData sheet. Etaline GN /3002 G11 Version no.: 1 Inline pump. Operating data. Design. Clean water. Efficiency 61.6 % 20.0 C.
Data sheet Item no.: 1900 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 72.19 m ³/h Operating data determined for maximum inlet pressure Actual developed head 70.26 m Clean water Efficiency
More informationData sheet. Page: 1 / 5 ETN GG A 11GA201502B. Operating data. Design. Requested developed head m. Efficiency 74.
Data sheet Page: 1 / 5 Operating data Requested flow rate 160.00 m³/h Actual flow rate 159.85 m³/h Operating data determined for maximum inlet pressure Actual developed head 20.96 m Requested developed
More informationEtanorm GPV-D/CPV-D Etanorm GPV-W/CPV-W
Type series booklet 1214.5/04-EN Vertical Low-Pressure Centrifugal Pumps (D) Dry Bearing - Cantilever Design (W) Wet Bearing - Plain Bearing Fields of Application Etanorm GPV/CPV pumps are used for handling
More informationILN, ILNC. In Line vertical pumps. ILN single suction ILN double suction ILNC. 1. Fields of Application. 3. Design. 4. Designation. 2.
Type series booklet CTI-2600/04 [04-2017] ILN, ILNC In Line vertical pumps ILN single suction ILN double suction ILNC sizes 65/ to 250/... sizes 300/ all sizes 1. Fields of Application Suitable for a wide
More informationData sheet. Page: 1 / 7. ETL GG AV11D BKSBIE3M Inline pump. Operating data. Design
Data sheet Page: 1 / 7 Operating data Requested flow rate Requested developed head Pumped medium Ambient air temperature 20.0 C Fluid temperature 20.0 C Fluid density 998 kg/m³ Water Clean water Not containing
More informationData sheet. Page: 1 / 5. ETL GGSAV11D BKSBIE3 Inline pump. Operating data. Design
Data sheet Page: 1 / 5 Operating data Requested flow rate Operating data determined for maximum inlet pressure Requested developed head 15.00 m Pumped medium Ambient air temperature 20.0 C Fluid temperature
More informationNorm-Centrifugal Pumps PN 10
Norm-Centrifugal Pumps PN 10 Pump dimensions acc. to DIN EN 733 with additional sizes Technical requirements acc. to DIN ISO 9908 Application For pumping pure water, industrial water, sea water, condensate,
More informationVolute Casing Centrifugal Pumps of Inline Design Series NI
Volute Casing Centrifugal Pumps of Inline Design Series NI Application For pumping pure water, industrial water, sea water, condensates, oils, brines, lyes and hot water. The fluids to be pumped must not
More informationStandardised Water Pump. Etanorm. Type Series Booklet
Standardised Water Pump Etanorm Type Series Booklet Legal information/copyright Type Series Booklet Etanorm KSB Aktiengesellschaft All rights reserved. The contents provided herein must neither be distributed,
More informationAutomatic Waste Water Pump Station. Evamatic-Box N. Type Series Booklet
Automatic Waste Water Pump Station Evamatic-Box N Type Series Booklet Legal information/copyright Type Series Booklet Evamatic-Box N All rights reserved. The contents provided herein must neither be distributed,
More informationThe e-nsc End Suction Pump Series
NEW The e-nsc End Suction Pump Series Your go-to single-stage pump for heavy-duty use STANDARDIZED TO EN733, ISO 5199 AND DIRECTIVE 9/125/EC. POTABLE WATER APPROVED (ACS AND DM174). It s not your standard
More informationClose-coupled pumps Series ES04
Close-coupled pumps Series ES04 www.andritz.com/pumps General Description / Application Pumps of series ES04 are extremely compact units which require very little space. They are particularly suitable
More informationData sheet. Customer item no.: Communication dated: Number: ES Doc. no.: Item no.: 100 Quantity: 1 Date: 19/03/2015 Page: 1 / 6
Data sheet Item no.: Page: 1 / 6 Operating data Operating data determined for maximum inlet pressure Pumped medium Water Clean water Not containing chemical and mechanical substances which affect the materials
More informationIn-line Twin Pump. Etaline Z PumpDrive 2/ Etaline Z PumpDrive 2 Eco. Type Series Booklet
In-line Twin Pump Etaline Z PumpDrive 2/ Type Series Booklet Legal information/copyright Type Series Booklet Etaline Z PumpDrive 2/ All rights reserved. The contents provided herein must neither be distributed,
More informationData sheet. Omega B GB G F Version no.: 1. Operating data. Design. Driver, accessories. Clean water. Actual developed head 57.
Data sheet Item no.: 3700 Page: 1 / 5 Operating data Pumped medium Water Actual flow rate 415.38 m ³/h Clean water Actual developed head 57.81 m Not containing chemical and Efficiency 82.3 % mechanical
More informationVERTICAL IN-LINE PUMP
VERTICAL IN-LINE PUMP TECHNICAL FEATURES ELINE: Vertical centrifugal pumps, single impeller, volute casing, non-self priming pump, in-line executive, with mechanical seal. Hydraulically designed in line
More informationGrey Water and Condensate Pump. Rotex. Type Series Booklet
Rotex Type Series Booklet Legal information/copyright Type Series Booklet Rotex Original operating manual All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationBOA-SuperCompact. Type Series Booklet
Globe Valve BOA-SuperCompact PN 6/10/16 DN 20-200 Soft-seated Alignment Lugs Type Series Booklet Legal information/copyright Type Series Booklet BOA-SuperCompact KSB Aktiengesellschaft Pegnitz All rights
More informationBOA-Compact. Type Series Booklet
Globe Valve BOA-Compact PN 6/16 DN 15-200 Soft-seated Flanged Type Series Booklet Legal information/copyright Type Series Booklet BOA-Compact KSB Aktiengesellschaft Pegnitz All rights reserved. Contents
More informationHeat Transfer Fluid / Hot Water Pump HPK-L. Type Series Booklet
Heat Transfer Fluid / Hot Water Pump HPK-L Type Series Booklet Legal information/copyright Type Series Booklet HPK-L All rights reserved. The contents provided herein must neither be distributed, copied,
More informationPump Station. Ama-Porter CK Pump Station. Type Series Booklet
Pump Station Ama-Porter CK Pump Station Type Series Booklet Legal information/copyright Type Series Booklet Ama-Porter CK Pump Station All rights reserved. The contents provided herein must neither be
More informationINVCP, INVCN. Vertical pumps for tanks. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data
Type series booklet CTI-0300/03 [05-2012] INVCP, INVCN Vertical pumps for tanks 1. Fields of Application INVCP pumps are used for organic and inorganic liquids in water services and different industries.
More informationClosed-coupled Pump. Etachrom B. 50 Hz - 60 Hz. Type Series Booklet
Closed-coupled Pump Etachrom B 50 Hz - 60 Hz Type Series Booklet Legal information/copyright Type Series Booklet Etachrom B All rights reserved. The contents provided herein must neither be distributed,
More informationBOA-Compact EKB. Type Series Booklet
Globe Valve BOA-Compact EKB PN 10/16 DN 15-200 Soft-seated Flanged Type Series Booklet Legal information/copyright Type Series Booklet BOA-Compact EKB KSB Aktiengesellschaft Pegnitz All rights reserved.
More informationCirculator Pumps with Continuously Variable Differential Pressure Control and I.R. Interface for Remote Control
Type series booklet 1115.52/2-10 Riotec r /Riotec r Z Circulator Pumps with Continuously Variable Differential Pressure Control and I.R. Interface for Remote Control Riotec Riotec Z Energy efficiency class
More informationThermal oil. Hot Water Pumps
Type Series Booklet and 0 Hz 0.5/3-0 G Etanorm SYA/Etanorm-RSY Thermal Oil / Hot Water Pumps Automation products available: PumpExpert Hyamaster hyatronic Fields of Application Etanorm SYA/Etanorm-RSY
More informationContents. Identification
Contents Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole Construction Sectional drawing Construction features Test pressure Operating conditions
More informationBOA-Control IMS. Type Series Booklet
Balancing and Shut-off Valve BOA-Control IMS PN 16 DN 15-350 Flow Rate and Temperature Sensor Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet BOA-Control IMS All rights
More informationEtanorm SYT Type Series Booklet
Thermal Oil / Hot Water Pump Etanorm SYT Type Series Booklet Legal information/copyright Type Series Booklet Etanorm SYT All rights reserved. The contents provided herein must neither be distributed, copied,
More informationRWCP, RWCN. Vertical pumps for tanks for loaded liquids. 1. Fields of Application. 3. Design. 4. Designation. 2. Operating Data
Type series booklet CTI-4900/01 [04-2012] RWCP, RWCN Vertical pumps for tanks for loaded liquids 1. Fields of Application RWCP and RWCN are vertical, centrifugal pumps designed for wells, ditches and tanks.
More informationAma-Drainer-Box Type Series Booklet
Automatic Waste Water Lifting Unit Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced,
More informationTPED /4-A-F-A-BQQE 3X400 50HZ
GRUNDFOS DATA BOOKLET TPED 125-3/4-A-F-A-BQQE 3X4 5HZ Grundfos pump 98742617 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tped/98742617/tped-125-3-4-a-f-a-bqqe.html
More informationTPED /4-S-A-F-A-BAQE 3X400 50HZ
GRUNDFOS DATA BOOKLET TPED -9/-S-A-F-A-BAQE 3X 5HZ Grundfos Pump 99137 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tpeds/99137/tped--9--s-a-f-a-baqe.html
More informationNon-clogging Pump DBS TECHNICAL DATA. Output: up to 1200 m 3 /h. depending of the pump size and material execution
Non-clogging Pump DBS 3216...30040 TECHNICAL DATA Output: up to 1200 m 3 /h Delivery head: up to 100 m Speed: Medium temperature: max. 110 C Casing pressure: Shaft sealing: up to 3600 rpm depending of
More informationABS submersible sewage pump AFP
BS submersible sewage pump FP - Robust, reliable submersible pumps from. to kw for pumping wastewater and sewage from buildings and sites in private, commercial, industrial and municipal areas in accordance
More informationTP /2-A-F-A-BAQE 400D 50HZ
GRUNDFOS DATA BOOKLET TP 32-38/2-A-F-A-BAQE 4D 5HZ Grundfos Pump 968677 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/968677/tp-32-38-2-a-f-a-baqe.html
More informationSubmersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
More informationVolute Casing Pump additional sizes to those of ISO 2858/EN 22858
Volute Casing Pump additional sizes to those of ISO 2858/EN 22858 CBTA 150200...350400 + 2 additional sizes 100160 and 125200 TECHNICAL DATA Output: up to 2200 m 3 /h Delivery head: up to 160 m Speed:
More informationSubmersible Borehole Pump. UPAchrom. 4", UPAchrom 100 CC + DN 100. Type Series Booklet
Submersible Borehole Pump UPAchrom 4", UPAchrom 1 CC + DN 1 Type Series Booklet Legal information/copyright Type Series Booklet UPAchrom All rights reserved. The contents provided herein must neither be
More informationData sheet. KRTF /24XEG-S IE3 Version no.: 3. Operating data. Design. Driver, accessories
Data sheet Item no.: 100 Page: 1 / 5 Operating data Requested flow rate 178.00 US GPM Requested developed head 14.40 ft Pumped medium Water Clean water Not containing chemical and mechanical substances
More informationTPE /4-A-F-A-BAQE 3X400 50HZ
GRUNDFOS DATA BOOKLET TPE 1-11/-A-F-A-BAQE 3X 5HZ Grundfos Pump 99113 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tpe/99113/tpe-1-11--a-f-a-baqe.html
More informationNB80-160/161 A-F2-A-BQQE
GRUNDFOS DATA BOOKLET NB8-16/161 A-F2-A-BQQE Grundfos pump 9943539 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/9943539/nbe-125-315-275-as-f2-a-e-bqqe.html
More informationNBE40-125/139 AS-F2-A-BAQE
GRUNDFOS DATA BOOKLET NBE-125/139 AS-F2-A-BAQE Grundfos pump 999983 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/999983/nbe--125-139-as-f2-a-e-baqe.html
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More informationVERTICAL MULTISTAGE PUMPS HIL AND HILFLEX SEE OUR FLEXDRIVE LEAFLET FOR DRIVE DETAILS. reliable efficient quality. Pumping Technology
TM VERTICAL MULTISTAGE PUMPS HIL AND HILFLEX SEE OUR FLEXDRIVE LEAFLET FOR DRIVE DETAILS reliable efficient quality HIL Vertical Multistage Pumps Introduction Smedegaards' range of HIL vertical multistage
More informationNBE50-250/205 A-F2-A-BAQE
GRUNDFOS DATA BOOKLET NBE5-25/25 A-F2-A-BAQE Grundfos pump 9518635 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nbe/9518635/nbe-5-25-25-a-f2-a-e-baqe.html
More informationHigh-pressure In-line Pump. Movitec. 50 Hz. Type Series
High-pressure In-line Pump 50 Hz Type Series Operating data A Characteristic Value low rate Q [m 3 /h] 8,6 Q [l/s] 2,4 Head H [m] 1 luid temperature T [ C] -15 to +120 Operating pressure p [bar] 1) B Characteristic
More informationData sheet: Wilo-VeroLine-IPL 100/ /4
Data sheet: Wilo-VeroLine-IPL 1/145-1.5/4 Pump curves 4-pole, 5 Hz H[m] Qmin 1 8 Wilo-VeroLine-IPL 1/175 - Wilo-VeroLine-IPL 1/135 Approved fluids (other fluids on request) Heating water (in accordance
More informationAxially split volute casing pumps. Applications. Bearings. Shaft seal. Operating data
Type series booklet 1385.52/3--10 RDLV Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationTP /4-A-F-A-BUBE 400Y 50HZ
GRUNDFOS DATA BOOKLET TP 1-6/4-A-F-A-BUBE 4Y 5HZ Grundfos Pump 9642628 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9642628/tp-1-6-4-a-f-a-bube.html
More informationData sheet: Wilo-VeroLine-IPL 65/ /2
Data sheet: Wilo-VeroLine-IPL 65/145-5.5/2 Pump curves 2-pole, 5 Hz H[m] 3 25 15 5 Qmin IPL 65/155-5,5/2 Wilo-VeroLine-IPL 65/155 - Wilo-VeroLine-IPL 65/145 IPL 65/145-5,5/2 IPL65/155-7,5/2 5 3 4 5 6 7
More informationNB /263 AS-F2-A-BAQE
GRUNDFOS DATA BOOKLET NB125-25/263 AS-F2-A-BAQE Grundfos pump 9832195 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb/9832195/nb-125-25-263-as-f2-a-e-baqe.html
More informationXFLO XS SERIES. Single Stage Double Suction Split Casing Centrifugal Pump
XFLO P U M P S XS SERIES Single Stage Double Suction Split Casing Centrifugal Pump General and Construction 1. Applications Waterworks, Irrigation, Drainage pumping stations, Power stations, Industrial
More informationGRUNDFOS DATA BOOKLET TP, TPD, TPE, TPED, TPE2, TPE2 D, TPE3, TPE3 D. In-line circulator pumps. 50 Hz. Lenntech
GRUNDFOS DATA BOOKLET TP, TPD, TPE, TPED, TPE2, TPE2 D, TPE3, TPE3 D In-line circulator pumps Hz Lenntech TP Series 100 and 0 pumps 6. TP Series 100 and 0 pumps Fig. 9 TP Series 100 and TP Series 0 GrB28
More informationSIHI SuperNova. Volute casing pumps. Type ZLIC TECHNICAL DATA. 0B, 0C, 4B max. 120 C Casing pressure: PN 16 / PN 10 1)
Volute casing pumps SIHI SuperNova Type ZLIC 040160... 200 TECHNICAL DATA Output: Head: Speed: Material: Temperature: max. 330 m³/h max. 60 m max. 3600 rpm grey cast iron: 0B, 0C material design: 0B, 0C,
More informationVolute pumps for hot water up to 207 C
Volute pumps for hot water up to 207 C SIHI SuperNova ZDND 032160... 250 TECHNICAL DATA Output: Delivery head: Speed: max. 600 m³/h max. 90 m max. 3600 Temperature: max. 207 C Casing pressure: PN 25 Shaft
More informationData sheet: Wilo-VeroTwin-DPL 65/ /2
Data sheet: Wilo-VeroTwin-DPL 65/175-5.5/2 Pump curves 2-pole - individual operation H[m] 35 3 25 2 Qmin DPL 65/175-5,5/2 Wilo-VeroTwin-DPL 65/175 - Wilo-VeroTwin-DPL 65/165 DPL 65/175-7,5/2 DPL 65/165-5,5/2
More informationNB /193 A-F2-A-BAQE
GRUNDFOS DATA BOOKLET NB100-200/193 A-F2-A-BAQE Grundfos Pump 98305367 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nb000/98305367/nb-100-200-193-a-f2-a-e-baqe.html
More informationHigh-pressure In-line Pump. Movitec B. 50 Hz. Type Series Booklet
High-pressure In-line Pump Movitec B 5 Hz Type Series Booklet Legal information/copyright Type Series Booklet Movitec B KSB ktiengesellschaft ll rights reserved. The contents provided herein must neither
More informationTP /4-A-F-A-BQQE 400Y 50HZ
GRUNDFOS DATA BOOKLET TP 4-1/4-A-F-A-BQQE 4Y 5HZ Grundfos Pump 9686883 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9686883/tp-4-1-4-a-f-a-bqqe.html
More informationData sheet: Wilo-CronoLine-IL 125/210-5,5/4
Data sheet: Wilo-CronoLine-IL 15/1-5,5/ Pump curves -pole, 5 Hz H[m] 18 16 1 1 1 8 6 P [kw] 8 1 16 6 Qmin IL 15/-5,5/ IL 15/1-5,5/ IL 15/19-/ Wilo-CronoLine-IL 15/ - Wilo-CronoLine-IL 15/19 IL 15/-7,5/
More information3 Specification Magneta Smedegaard
3 Specification Magneta Smedegaard 3.1 Variable Speed Circulator Pumps Main applications Heating, ventilation, air-conditioning, refrigerating and circulation systems - One-pipe and two-pipe systems -
More informationVolute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C
Volute Casing Centrifugal Pumps PN 16 for heat-transfer liquids Heat-transfer oil up to 350 C Hot water up to183 C Series CMIT in inline design Series CMAT with axial inlet ATEX 0 a Series CMAT Series
More informationCompany name: GSI Created by: Xiao Ying Wong Phone: Date: 10/03/2017 Client: Client Number: Contact:
Position Qty. Description 2 NBG 125-8-16/156 A-F2-A-BAQE Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 with dimensions and rated performance
More informationRDLO / RDLO V. Axially Split Volute Casing Pumps. Fields of Application. Bearings. Operating Data. Materials. Design. Shaft Seal. Designation 01 P F
Type Series Booklet 1387.5/2--10 RDLO / RDLO V Axially Split Volute Casing Pumps Fields of Application Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems,
More informationData sheet: Wilo-CronoLine-IL 65/130-4/2
Data sheet: Wilo-CronoLine-IL 65/13-4/2 Pump curves 2-pole, 5 Hz H[m] 32 28 24 I 2 I 16 12 8 4 2 4 6 8 1 5 1 15 2 25 3 Q[l/s] P 2 [kw] Ø 14 6 Ø 127 4L Ø 117 2 Ø 18 2 4 6 8 1 η p[%] Qmin IL 65/14-5,5/2
More informationData sheet: Wilo-CronoLine-IL 50/120-2,2/2
Data sheet: Wilo-CronoLine-IL 5/12-2,2/2 Pump curves 2-pole, 5 Hz H[m] 28 24 2 Qmin IL 5/14-3/2 IL 5/13-3/2 Wilo-CronoLine-IL 5/14 - Wilo-CronoLine-IL 5/11 IL 5/14-4/2 Approved fluids (other fluids on
More informationData sheet: Wilo-CronoLine-IL 80/145-1,1/4
Data sheet: Wilo-CronoLine-IL 8/145-1,1/4 Pump curves 4-pole, 5 Hz H[m] 12 1 8 6 4 2 2 4 6 8 1 5 1 15 2 25 3 P 2 [kw] 2, 1,5 Ø 156 1, Ø 144,5 Ø 133 2 4 6 8 1 η p[%] Qmin IL 8/17-2,2/4 IL 8/16-1,5/4 IL
More informationData sheet: Wilo-CronoLine-IL 50/200-1,5/4
Data sheet: Wilo-CronoLine-IL 5/2-1,5/4 Pump curves 4-pole, 5 Hz H[m] 18 16 14 12 1 8 6 4 2 1 2 3 4 5 4 8 12 Q[l/s] P 2 [kw] Ø 28 1,5 Ø 197 1,,5 1 2 3 4 5 η p[%] Qmin Wilo-CronoLine-IL 5/22 - Wilo-CronoLine-IL
More informationHigh-pressure In-line Pumps 60 Hz
Type Series Booklet Entwurf 30.8.04 1798.56-10 High-pressure In-line Pumps 60 Hz VE V LHS Fields of Application VE are employed for general water supply, sprinkling, irrigation and pressure boosting duties,
More informationTPE N-A-F-I-BUBE
GRUNDFOS DATA BOOKLET TPE2 50-200-N-A-F-I-BUBE Grundfos pump 98416629 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tpe3ni/98416629/tpe2-50-200-n-a-f-i-bube.html
More informationVolute Casing Centrifugal Pumps in In-line Design with Magnetic Drive. Series CNI-M
Volute Casing Centrifugal Pumps in In-line Design with Magnetic Drive Series CNI-M Usage For pumping toxic, volatile, explosive or other fluids harmful to the environment which call for service of hermetically
More informationData sheet: Wilo-VeroTwin-DPL 40/ /4
Data sheet: Wilo-VeroTwin-DPL 4/13-.2/4 Pump curves 4-pole - individual operation H[m] 8 7 6 4 3 2 1 P 2 [kw],4,2 η p[%] 6 4 2 1 2 3 4 6 7 Qmin Pump curves Wilo-VeroTwin-DPL 4/16 - Wilo-VeroTwin-DPL 4/13
More informationTP /2-A-F-A-BQQE 400D 50HZ
GRUNDFOS DATA BOOKLET TP 65-46/2-A-F-A-BQQE 4D 5HZ Grundfos Pump 9687526 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9687526/tp-65-46-2-a-f-a-bqqe.html
More informationLowara. Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733. SH Series. 50 Hz
Centrifugal electric pumps made of AISI 316 stainless steel in compliance with EN 733 SH Series 50 Hz SERIE SH OPERATING CHARACTERISTICS AT 50 Hz PRINT 05-2007 2 CONTENTS 5 Specifications......................................................................
More informationMODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
More informationJUNG PUMPEN COMPLI 100 MC SEWAGE LIFTING STATIONS
APPLICATION The sewage lifting stations compli 100, compli 500 and compli 1000 with MultiCut cutting system are uses especially for disposal in special objects, such as weekend cottages, houseboats, toilets
More informationTPE /2-S-A-F-A-BAQE 3X400 50HZ
GRUNDFOS DATA BOOKLET TPE -33/2-S-A-F-A-BAQE 3X HZ Grundfos Pump 99116 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tpes2/99116/tpe--33-2-s-a-f-a-baqe.html
More informationPN 16/PN 25 Volute Centrifugal-Pumps for Heat Transfer Media Thermal Oil up to 400 C Hot Water up to 207 C
PN 16/PN 25 Volute Centrifugal-s for Heat Transfer Media Thermal Oil up to 00 C Hot Water up to 7 C Series NTWH/CTWH Series NBWH/CBWH Series NIWH/CIWH Application For circulating heat transfer media such
More informationVolute pumps for hot water up to 230 C
Volute pumps for hot water up to 230 C SIHI SuperNova ZEND 031125... 125250 TECHNICAL DATA Output: Delivery head: Speed: max. 600 m³/h max. 90 m max. 3600 rpm Temperature: max. 230 C (1) Casing pressure:
More informationElite. KSB Australia Pty Ltd. Centrifugal Pump
Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning
More informationTechnical data 50 & 60 Hz. Vertical centrifugal pumps Series: DPLHS
Technical data 50 & 60 Hz Vertical centrifugal pumps Series: DPLHS 2 Table of Contents 1 Pump introduction 1.1 General... 4 1.2 Model key... 4 1.3 Description of the product... 4 1.4 Operation... 5 1.5
More informationNK /310A2F1AE-SBAQE
GRUNDFOS DATA BOOKLET NK15-315/31A2F1AE-SBAQE Grundfos Pump 98318632 Thank you for your interest in our products Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/nkbasis/98318632/nk-15-315-31-a2-f-a-e-baqe.html
More informationBearings. Shaft seal. Materials
Type series booklet 1385.51/3--10 RDL Axially split volute casing pumps Applications Waterworks, irrigation and drainage pumping stations, power stations, industrial water supply systems, fire fighting
More informationCompany name: BKB Building Solutions Created by: Michael Chlopek Phone: Date: 13/03/2017
Position Qty. Description 1 NB 1-31/29 A-F2-B-E-BAQE Phone: 4 84 61 Date: 13/3/217 Product No.: On request Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 199 with dimensions
More informationELECTRIC SUBMERSIBLE PUMPS SEMISOM/80
Electric pumps for professional applications to convey sewage water, entirely designed and manufactured in our Italian facility. APPLICATION PERFORMANCE RANGE To convey waste and sewage water from septic
More informationData sheet: Wilo-CronoTwin-DL 65/250-4/4
Data sheet: Wilo-CronoTwin-DL 65/25-/ Pump curves -pole - individual operation H[m] 2 2 2 Qmin DL 65/25-3/ Wilo-CronoTwin-DL 65/27 - Wilo-CronoTwin-DL 65/25 DL 65/25-/ DL 65/27-5,5/ Approved fluids (other
More informationTP /2-A-F-A-BUBE 1X230 50HZ
GRUNDFOS DATA BOOKLET TP 8-12/2-A-F-A-BUBE 1X23 5HZ Grundfos pump 9642448 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/9642448/tp-8-12-2-a-f-a-bube.html
More informationData sheet: Wilo-CronoLine-IL 100/250-5,5/4
Data sheet: Wilo-CronoLine-IL 1/25-5,5/ Pump curves -pole, 5 Hz H[m] 2 2 16 Qmin IL 1/25-5,5/ IL 1/26-7,5/ Wilo-CronoLine-IL 1/27 - Wilo-CronoLine-IL 1/25 IL 1/27-11/ IL 1/26-11/ Approved fluids (other
More informationTPE 25-80/2-A-O-A-BUBE 1X230 50HZ
GRUNDFOS DATA BOOKLET TPE 25-8/2-A-O-A-BUBE 1X23 5HZ Grundfos pump 98525643 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tpe/98525643/tpe-25-8-2-a-o-a-bube.html
More informationData sheet: Wilo-VeroLine-IPL 65/ /2
Data sheet: Wilo-VeroLine-IPL 65/115-1.5/2 Pump curves 2-pole, 5 Hz H[m] 16 14 12 1 8 6 4 2 1 2 3 4 5 2 4 6 8 1 12 14 16 P 2 [kw] 1,6 1,2,8,4 1 2 3 4 5 η p[%] 8 6 Qmin 4 2 1 2 3 4 5 Dimension drawing 8
More informationVogel - Inline Pumps. Design LR / LMR & LRZ / LMZ, LER & LEZ
Vogel - Inline Pumps Design LR / LMR & LRZ / LMZ, LER & LEZ 1 Performance: Capacity up to 350 m 3 /h (1540 USgpm) Head up to 85 m (280 feet) Speed up to 2950 min -1 (2950 rpm) Pump sizes: DN 40 up to DN
More informationMovitec VCI Type Series Booklet
Multistage High-pressure Immersion Centrifugal Pump Movitec VCI Type Series Booklet Legal information/copyright Type Series Booklet Movitec VCI All rights reserved. The contents provided herein must neither
More information