THE RIGHT SOLUTION FOR EVERY APPLICATION

Size: px

Start display at page:

Download "THE RIGHT SOLUTION FOR EVERY APPLICATION"

Hope Sherman
5 years ago
Views:

1 VFD ABLES FOR AUTOMATION THE RIGHT SOLUTION FOR EVERY APPLIATION Products Added VFD Lean TR VFD Dual TR Servo VFD ombo DS VFD XLPE TR VFD XLPE 2KV TR Also Included! FLEXIBLE ONTROL ONTINUOUS FLEX SILIONE TORSION TRAY VFD DATA SERVO MOTOR EUROPEAN STYLE BUS/AT HALOGEN-FREE REELING SPEIAL USTOM

2 VFD Lean TR: Reduced d OD,, oil rresistant and flexible VFD cable VFD Lean TR is an extremely exible and oil resistant VFD cable. It is designed to perform in VFD applications where increases in voltage can occur due to spikes, harmonics, in-rush current and wave re tion. VFD Lean TR has a foil and tinned copper braid shield for 100% protection against EMI and RFI. (UL) T-ER 90 UL MTW 600V/1000V TEHNIAL DATA: Voltage: UL/c(UL): 600 V UR/SA AWM: 1000 V UL WTT: 1000 V Temperature: UR-AWM up to UL/(UL)/ SA AWM up to static haracteristics: UL / c(ul) FT4 olor code: black # d conductors with ONSTRUTION: onductor: lass 5 tinned copper stranding Insulation: specially formulated PV/nylon black PV Oil resistant meeting Oil Res 1 Reduced OD for easier installation Tinned copper class 5 stranding for improved exibility UL T-ER, UL MTW, UL WTT & UR AWM c(ul) I, SA AWM FT 4 RoHS & E able weight Amperage Maximum Horse Power Ra ng* AWG/ inch mm lbs/m V 460V 575V /4c /4c /4c /4c / /4c /4c /4c /4c /4c EM-2 grounding connector EM-4 grounding connector NPT PG Metric NPT PG Metric EN2-1/2 EP2-13 EM2-20 EN4-1/2 EP4-13 EM EN2-1/2 EP2-13 EM2-20 EN4-1/2 EP4-13 EM EN2-1/2 EP2-13 EM2-20 EN4-1/2 EP4-13 EM EN2-1/2 EP2-16 EM2-25 EN4-1/2 EP4-16 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM EN2-1 EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM4-50 Table shows recommended cable glands. Other thread sizes may be available. Refer to EM gland pages at the end of this brochure. Allowable ampacities are based on no more than three current carrying conductors in a raceway, cable, or direct buried and an ambient temperature of 30 (2011 NE Table (B)(16)) * Maximum Horse Power rating represents the largest HP motor the AWG is recommended for based on horse power (HP) and the full load current (FL) x 125% per NE Art (A). Amperes (FL) were determined from NE Art

3 VFD VFD XLPE XLPE TR: TR: XLPE insulated, oil oil resistant and flexible VFD cable VFD XLPE TR has XLPE insulation for improved capacitance for longer installations and is extremely flexible and oil resistant. It is designed to perform in VFD applications where increases in voltage can occur, such as spikes in harmonics, in-rush current and wave reflection. VFD XLPE TR has a foil and tinned copper braid shield for 100% protection against EMI and RFI. (UL) T-ER 90 DRY/WET 600V/1000V TEHNIAL DATA: Voltage: UL/c(UL): 600 V SA AWM: 1000 V UL WTT: 1000 V Temperature: UL/c(UL)/ SA AWM up to static /105 0 haracteristics: UL / (UL) FT4 olor code: black # d conductors with ONSTRUTION: onductor: lass K tinned copper stranding Insulation: specially formulated XLPE black PV XLPE insulation for excellent capacitance values Oil resistant meeting Oil Res 1 & 2 Tinned copper class K stranding for improved exibility UL T-ER, UL MTW, UL WTT & UL Flexible Motor Supply able c(ul) I-T, SAAWM FT 4 RoHS & E able weight e Maximum Horse Power Ra ng* AWG/ inch mm lbs/ V 460V 575V /4c /4c /4c / /4c /4c /4c /4c /4c EM-2 EM connector EM-4 EM connector NPT PG Metric NPT PG Metric EP2-16 EM2-25 EN4-1/2 EP4-16 EM EN2-3/4 EP2-16 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-1 EP4-29 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM EN2-1 EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM4-50 Table shows recommended cable glands. Other thread sizes may be available. Refer to EM gland pages at the end of this brochure. Allowable ampacities are based on not more than three current carrying conductors in a raceway, cable, or direct buried and an ambient temperature of 30 (2011 NE Table (B)(16)) * Maximum Horse Power rating represents the largest HP motor the AWG is recommended for based on horse power (HP) and the full load current (FL) x 125% per NE Art (A). Amperes (FL) were determined from NE Art

4 VFD ombo DS: Flexible VFD cable with 1 or 2 pairs for brake Servo VFD ombo DS is a flexible VFD cable with 1 or 2 pairs for a brake or temperature sensor when they are part of the motor. The pairs are individually shielded with a drain wire. Servo VFD ombo DS also has a foil and tinned copper braid shield for 100% protection against EMI and RFI. (UL) T-ER 90 UL MTW 600V/1000V TEHNIAL DATA: Voltage: UL/c(UL): 600 V UR/SA AWM: 1000 V UL WTT: 1000 V Temperature: UR-AWM up to UL/c(UL)/ SA AWM up to static haracteristics: UL / c(ul) FT4 olor code: black # d conductors with pairs: numbered 5/6 & 7/8 ONSTRUTION: onductor: lass 5 tinned copper stranding Insulation: specially formulated PV/nylon black PV Shielded pair(s) for a brake or temperature sensor all in one cable Oil resistant meeting Oil Res 1 Tinned copper class 5 stranding for improved flexibility UL T-ER, UL MTW, UL WTT & UR AWM c(ul) I, SA AWM FT 4 RoHS & E able Maximum Horse Power Amperage weight Rating* AWG/ Pair inch mm lbs/mft V 460V 575V /4c 14/1pr /4c 18/2pr / /4c 18/1pr /4c 14/1pr /4c 18/2pr /4c 18/1pr /4c 14/1pr /4c 18/2pr / /4c 14/1pr / /4c 14/1pr EM-2 EM connector EM-4 EM connector NPT PG Metric NPT PG Metric EN2-3/4 EP2-16 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-32 EN4-1 EP4-29 EM EP2-16 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM EN2-3/4 EP2-21 EM2-25 EN4-1 EP4-29 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM4-32 Table shows recommended cable glands. Other thread sizes may be available. Refer to EM gland pages at the end of this brochure. Allowable ampacities are based on three current carrying conductors plus pairs in a raceway, cable, or direct buried and an ambient temperature of 30 (2011 NE Table (B)(16)) * Maximum Horse Power rating represents the largest HP motor the AWG is recommended for based on horse power (HP) and the full load current (FL) x 125% per NE Art (A). Amperes (FL) were determined from NE Art Other dimensions available upon request.

5 VFD ombo XLPE: XLPE insulation plus shielded pair for brake VFD ombo XLPE has XLPE insulation for improved capacitance for longer installations. It also has a shielded pair for temperature sensor or brake. VFD ombo XLPE is flexible and very oil resistant and has an overall foil and braid shield for 100% protection against EMI and RFI. (UL) T-ER 90 UL MTW 600V/1000V TEHNIAL DATA: Voltage: UL/c(UL): 600 V UR/SA AWM: 1000 V UL WTT: 1000 V Temperature: UL/c(UL)/ SA AWM up to static /105 0 haracteristics: olor code: UL / c(ul) FT4 black # d conductors with ONSTRUTION: onductor: lass K tinned copper stranding Insulation: specially formulated XLPE black PV XLPE insulation for excellent capacitance values Shielded pair for temperature sensor or brake Oil resistant meeting Oil Res 1 & 2 UL T-ER, UL MTW, UL WTT & UL Flexible Motor Supply able c(ul) I-T, SA AWM FT 4 RoHS & E able Maximum Horse Amperage weight Power Rating* AWG/ Pair inch mm lbs/mft V 460V 575V /4c 18/1pr /4c 18/1pr /4c 14/1pr /4c 18/1pr /4c 14/1pr /4c 14/1pr / /4c 14/1pr /4c 14/1pr /4c 14/1pr /4c 14/1pr EM-2 EM connector EM-4 EM connector NPT PG Metric NPT PG Metric EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM EN2-1 EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM4-50 Table shows recommended cable glands. Other thread sizes may be available. Refer to EM gland pages at the end of this brochure. Allowable ampacities are based on not more than three current carrying conductors in a raceway, cable, or direct buried and an ambient temperature of 30 (2011 NE Table (B)(16)) * Maximum Horse Power rating represents the largest HP motor the AWG is recommended for based on horse power (HP) and the full load current (FL) x 125% per NE Art (A). Amperes (FL) were determined from N E Art

6 VFD Dual TR: Rugged, oil resistant and flexible VFD cable VFD Dual TR is a flexible VFD cable with an inner jacket for more rugged applications. The inner jacket also helps impede capacitive attraction between the shield and conductors. VFD Dual TR has a foil and tinned copper braid shield for 100% protection against EMI and RFI. c(ul) I 90 FT4 SA AWM I/II A/B V TEHNIAL DATA: Voltage: UL/c(UL): 1000 V UR/SA AWM: 1000 V UL WTT: Temperature: UR-AWM up to +105 UL/(UL)/ SA AWM up to static haracteristics: UL / c(ul) FT4 olor code: black # d conductors with 0 ONSTRUTION: onductor: lass 5 tinned copper stranding Insulation: specially formulated PV/nylon black PV Oil resistant meeting Oil Res 1 Inner jacket for rugid applications Tinned copper class 5 stranding for improved flexibility UL T-ER, UL MTW, UL WTT & UR AWM c(ul) I, SA AWM FT 4 RoHS & E able weight Amperage Maximum Horse Power Rating* AWG/ inch mm lbs/mft V 460V 575V /4c /4c /4c / /4c /4c /4c /4c /4c EM-2 grounding connector EM-4 grounding connector NPT PG Metric NPT PG Metric EN2-1/2 EP2-13 EM2-20 EN4-1/2 EP4-13 EM EN2-1/2 EP2-13 EM2-20 EN4-1/2 EP4-13 EM EN2-1/2 EP2-16 EM2-25 EN4-1/2 EP4-16 EM EP2-16 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-1 EP4-29 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM4-50 Table shows recommended cable glands. Other thread sizes may be available. Refer to EM gland pages at the end of this brochure. Allowable ampacities are based on no more than three current carrying conductors in a raceway, cable, or direct buried and an ambient temperature of 30 (2011 NE Table (B)(16)) * Maximum Horse Power rating represents the largest HP motor the AWG is recommended for based on horse power (HP) and the full load current (FL) x 125% per NE Art (A). Amperes (FL) were determined from NE Art

7 VFD Lean Auto TR: ontinuous flex and oil resistant VFD cable (UL) T-ER 90 UL MTW 600V/1000V TEHNIAL DATA: Voltage: UL/c(UL): UR/SA AWM: UL WTT: 1000 V Temperature: UR-AWM up to haracteristics: olor code: UL/(UL)/ SA AWM static 600 V 1000 V up to UL / c(ul) FT4 black # d conductors with ONSTRUTION: onductor: lass 6 tinned copper stranding Insulation: specially formulated PV/nylon black PV Oil resistant meeting Oil Res 1 Extra fine stranding for continuous flex applications UL T-ER, UL MTW, UL WTT & UR AWM c(ul) I, SA AWM FT 4 RoHS & E able weight Amperage Maximum Horse Power Rating* AWG/ inch mm lbs/mft V 460V 575V /4c /4c /4c / /4c /4c /4c /4c /4c VFD Symmetrical XLPE TR: Flexible VFD cable with 3 symmetrical grounds (UL) T-ER 90 UL MTW 600V/1000V TEHNIAL DATA: Voltage: UL/c(UL): UR/SA AWM: UL WTT: 600 V 1000 V 1000 V Temperature: UL/(UL)/ SA AWM up to +105 static haracteristics: UL / c(ul) FT4 olor code: black # d conductors with 0 ONSTRUTION: onductor: lass K tinned copper stranding Insulation: specially formulated XLPE black PV XLPE insulation for excellent capacitance values Oil resistant meeting Oil Res 1 & 2 3 symmetrical grounds for M Tinned lass K stranding for improved flexibilty UL T-ER, UL MTW, UL WTT and UL Flexible Motor Supply able c(ul) I-T, SA AWM FT 4 RoHS & E able weight Amperage Maximum Horse Power Rating* AWG/ Ground inch mm lbs/mft V 460V 575V /3c 3 x /3c 3 x / /3c 3 x /3c 3 x /3c 3 x /3c 3 x /3c 3 x

8 VFD XLPE 2KV TR: Shielded VFD cable rated for 2 KV with 3 symmetrical grounds VFD XLPE 2KV TR has an XLPE insulation for improved capacitance for longer installations. It has 3-symmetrical grounds to perform in VFD applications where increases in voltage such as ommon Mode urrent (M) can occur. VFD XLPE 2KV TR has a copper tape shield for 100% protection against EMI and RFI. 4/0 AWG 3 TYPE T-ER RHH OR RHW-2 DRS TEHNIAL DATA: Voltage: UL: Temperature: UL: static haracteristics: UL FT4 olor code: 2000V up to black # d conductors with ONSTRUTION: onductor: lass B bare copper stranding Insulation: specially formulated XLPE Screen: 5 mil copper tape with 50% overlap black PV XLPE insulation for excellent capacitance values 3 symmetrical grounds for better common mode current flow opper tape shield (50% overlap) for premium EMI & RFI protection UL T-ER RoHS able weight Amperage Maximum Horse Power Rating* AWG/ Ground inch mm lbs/mft V 460V 575V /3c 3 x /0-3c 3 x /0-3c 3 x /0-3c 3 x /0-3c 3 x c 3 x c 3 x c 3 x NPT EM-2 EM connector PG Metric NPT EM-2 EM connector PG Metric EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM EP2-48 EM2-63 EN4-2 EP4-48 EM EP2-48 EM2-63 EN4-2 EP4-48 EM EM EM Table shows recommended cable glands. Other thread sizes may be available. Refer to EM gland pages at the end of this brochure. Allowable ampacities are based on not more than three current carrying conductors in a raceway, cable, or direct buried and an ambient temperature of 30 (2011 NE Table (B)(16)) * Maximum Horse Power rating represents the largest HP motor the AWG is recommended for based on horse power (HP) and the full load current (FL) x 125% per NE Art (A). Amperes (FL) were determined from N E Art ord Grips available. See back page for more information.

VFD Termination Kits: 14 AWG to 500 kcmil VFD cables VFD Termination Kits are used to ground the shield of VFD cables to a metal enclosure and motor housing.

9 VFD Termination Kits: 14 AWG to 500 kcmil VFD cables VFD Termination Kits are used to ground the shield of VFD cables to a metal enclosure and motor housing. It is an effective way to remove noise associated with VFD motors and drives. Improve the effectiveness by also using a SAB EM grounding gland where the cable enters the enclosure and motor housing. Kit VFD GRD KIT 14-1 VFD GRD KIT 1-4/0 VFD GRD KIT Kit omponents 1/4" flat Tinned copper braid 3/4" opper tape Bolt assembly (see parts below) Rubber splicing tape Low profile tie wrap 7" Metal sand paper 3" x 3" Alcohol wipes 3/4" flat Tinned copper braid 3/4" opper tape Bolt assembly (see parts below) Rubber splicing tape Low profile tie wrap 7" Metal sand paper 3" x 3" Alcohol wipes 1" flat Tinned copper braid 3/4" opper tape Bolt assembly (see parts below) Rubber splicing tape Low profile tie wrap 10" Metal sand paper 3" x 3" Alcohol wipes Quantity 2 x 3ft 2 x 1ft Installation Prep Photo 1 bag 1 roll 2 pcs 1 pc 2 pcs 2 x 3ft 2 x 2ft 1 bag 1 roll 2 pcs 1 pc 2 pcs Attach to Enclosure 2 x 3ft 2 x 2ft 1 bag Bolt assembly brass bolt 1/4"-20 x 1-1/4" 2 pcs 1 roll brass nut 1/4"-20 2 pcs 2 pcs bronze locking washer 1/4"-20 2 pcs 1 pc brass washer 1/4"-20 x 9/16" OD 2 pcs 2 pcs brass washer 1/4"-20 x 1 1/4" OD 2 pcs

10 G EM-2: EM grounding gland, Metric PG & NPT Thread EM-2 is a nickel plated brass strain relief with integral grounding springs in the gland. It has an IP 68 protection class for excellent protection against dust and water spray. EM-2 comes in metric, PG and NPT thread. Material ontact Spring lamping Insert Seal O-Ring Protection lass Temperature Range Technical Data: Brass, Nickel Plated Special opper Alloy Polyamide 6 V2 hloroprene (R) NBR IP 68-5 Bar -20 to +100 permanent -40 to +150 intermittent Flammability V2 (according to UL 94) Thread Size lamping Range Ø Shield Diameter Thread Diameter (TD) Thread Length (TL) Wrenching Flats ap (SW1) Height (H) inches mm mm mm mm (min-max) (Ø min) NPT EN2-3/8 NPT 3/ EN2-1/2 NPT 1/ EN2-3/4 NPT 3/ EN2-1 NPT PG EP2-7 PG EP2-9 PG EP2-11 PG EP2-13 PG EP2-16 PG EP2-21 PG EP2-29 PG EP2-36 PG EP2-42 PG EP2-48 PG Metric EM2-12 M12X EM2-16 M16X EM2-16 M16X EM2-20 M20X EM2-25 M25X EM2-25 M25X EM2-32 M32X EM2-32 M32X EM2-40 M40X EM2-40 M40X EM2-50 M50X EM2-50 M50X EM2-63 M63X Additional thread sizes and colors available upon request

G EM-4: EM grounding glandwith vibration proof grounding springs Technical Data: Material Brass, Nickel Plated ontact Spring Special opper Alloy lamping Insert Polyamide 6 V2 Seal hloroprene (R)

11 G EM-4: EM grounding glandwith vibration proof grounding springs Technical Data: Material Brass, Nickel Plated ontact Spring Special opper Alloy lamping Insert Polyamide 6 V2 Seal hloroprene (R) O-Ring NBR Protection lass IP 68-5 Bar Temperature Range -20 to +100 permanent -40 to +150 intermittent Flammability V2 (according to UL 94) EM-4 is a nickel plated brass strain relief with integral grounding springs in the gland that will allow the cable to move without damage to the shield. A cable can be installed from either direction as well. It has an IP 68 protection class for excellent protection against dust and water spray. Thread Size lamping Range Ø Shield Diameter Thread Diameter (TD) Thread Length (TL) Wrenching Flats ap (SW1) Height (H) inches mm mm mm mm (min - max) (Ø min - max) NPT EN4-1/4 NPT 1/ EN4-3/8 NPT 3/ EN4-1/2 NPT 1/ EN4-1/2 NPT 1/ EN4-3/4 NPT 3/ EN4-1 NPT EN4-1 1/4 NPT 1 1/ EN4-1 1/2 NPT 1 1/ EN4-2 NPT Metric EM4-12 M12X EM4-16 M16X EM4-20 M20X EM4-20 M20X EM4-25 M25X EM4-32 M32X EM4-40 M40X EM4-50 M50X EM4-63 M63X EM4-63 M63X PG EP4-7 PG EP4-9 PG EP4-11 PG EP4-13 PG EP4-16 PG EP4-21 PG EP4-29 PG EP4-36 PG EP4-42 PG EP4-48 PG

12 Technical Information VFD Lean TR VFD XLPE TR Part Number apacitance (pf/ft) Impedance (Ohms) ord Grips Mutual Ground* Mutual Ground* EM-2 EM EP2-13 EP EP2-13 EP EP2-13 EP EP2-16 EP EP2-21 EP EP2-29 EP EP2-36 EP EP2-36 EP EP2-42 EP EP2-16 EP EP2-21 EP EP2-21 EP EP2-21 EP EP2-29 EP EP2-36 EP EP2-36 EP EP2-42 EP4-42 *for VFD Lean TR, value is conductor to screen orresponding ord Grips VFD Lean Auto TR VFD Symmetrical XLPE TR Part EM-2 grounding connector EM-4 grounding connector Number NPT PG Metric NPT PG Metric EN2-1/2 EP2-13 EM2-20 EN4-1/2 EP4-13 EM EN2-1/2 EP2-13 EM2-20 EN4-1/2 EP4-13 EM EN2-1/2 EP2-16 EM2-25 EN4-1/2 EP4-16 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM EN2-1 EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM EP2-16 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-3/4 EP2-21 EM2-25 EN4-3/4 EP4-21 EM EN2-1 EP2-29 EM2-32 EN4-1 EP4-29 EM EN2-1 EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-36 EM2-40 EN4-1 1/4 EP4-36 EM EP2-42 EM2-50 EN4-1 1/2 EP4-42 EM4-50 Toll Free: Fax: co 344 Kaplan Drive, NJ c

VFD CABLES FOR MOTOR AND DRIVE APPLICATIONS

VFD CABLES FOR MOTOR AND DRIVE APPLICATIONS VFD Lean TR VFD Dual TR Servo VFD Combo DS VFD XLPE TR VFD XLPE 2KV TR SAB s VFD cable series has you covered from fractional to 2 HP drives suitable for industrial