WSAA PRODUCT APPRAISAL CERTIFICATE

Transcription

1 WSAA PRODUCT APPRAISAL CERTIFICATE Pty Ltd AWASHAFT DN 400 / DN 600 / DN 800 Polypropylene (PP) Maintenance Shafts and Chambers AWASHAFT DN 400 / DN 600 / DN 800 Polypropylene (PP) Maintenance Shafts and Chambers have been appraised for compliance with the requirements of WSA 137:2013 and WSAA Product Specifications WSA PS 341 and WSA PS 337. The scope of this appraisal applies to the AWASHAFT DN 400 / DN 600 / DN 800 Polypropylene (PP) Maintenance Shaft and Chamber units and assemblies as listed in the attached Schedules A and B. Product Category Polypropylene (PP) Maintenance Shafts and Chambers PA Number: Supplier Brand Standards PA 1508 Par1 1 Issue 4 (Certificate) Pty Ltd AWASHAFT WSA 137:2013 Industry Standard for Maintenance Shafts and Maintenance Chambers for Sewerage WSAA Product Specification WSA PS-341 Maintenance Shafts (MS) Polypropylene (PP) for Non- Pressure Applications Sewerage WSA PS-337 Maintenance Chambers (MC) Polypropylene (PP) for Non- Pressure Applications Sewerage Other Specifications Issue date 9 March 2018 Expiry date 9 March 2023 Recoendations It is recoended that WSAA members and associates, subject to any specific requirements, accept / authorise the AWASHAFT DN 400 / DN 600 / DN 800 Polypropylene (PP) Maintenance Shaft and Chamber base units and assemblies as listed in Schedule B provided in pipeline design, installation, acceptance testing and coissioning in accordance with applicable WSAA Codes and the manufacturer s requirements where specified. Disclaimer The disclaimer on Page 2 explains a number of very important limits on your ability to rely on the information in this Product Appraisal Certificate (Certificate) and the assessment criteria used to underlay it. Please read it carefully and take it into account when considering the content in this Certificate. PA 1508 Issue 3 Issue 1 Rev 0 Page 1 of 17

2 1. Disclaimer This Product Appraisal Certificate (Certificate) is issued by WSAA on the understanding that: This Certificate applies to the product(s) as submitted in Schedule A. Any changes to the product(s) either minor or major shall void this Certificate. To maintain the recoendations of this Certificate any such changes shall be detailed and notified to the Product Appraisal Manager for consideration and review of the Certificate including the product appraisal criteria underlying it and appropriate action. Appraisals and their recoendations will be the subject of continuous review dependent upon the satisfactory performance of products. WSAA reserves the right to undertake random audits of product manufacture and installation. Where products fail to maintain appraised performance requirements the appraisal and its recoendations may be modified and reissued. Certificates will be reviewed and reissued at regular intervals not exceeding five (5) years. WSAA reserves the right to withdraw this Certificate at any time in its sole and absolute discretion for any reason. The following information explains a number of very important limits on your ability to rely on the information in this Certificate. Please read it carefully and take it into account when considering the contents of this Certificate. Any enquiries regarding this Certificate should be directed to the Product Appraisal Manager Phone: carl.radford@wsaa.asn.au Issue of Certificate This Certificate has been published and/or prepared by WSAA and nominated Project Manager and peer group of technical specialists (the Publishers). The Certificate and the underlying product appraisal criteria have been prepared for use within Australia only by technical specialists that have expertise in the function of products such as those appraised in the Certificate (the Recipients). By accepting this Certificate, the Recipient acknowledges and represents to the Publisher(s) and each person involved in the preparation of the Certificate and product appraisal criteria underlying it that the Recipient has understood and accepted the terms of this Disclaimer Limits on Reliance on Information and Recoendations Disclaimer of liability Neither the Publisher(s) nor any person involved in the preparation of the Certificate and product appraisal criteria underlying it accept(s) any liability for any loss or damage suffered by any person however caused (including negligence or the omission by any person to do anything) relating in any way to the Certificate or the product appraisal criteria underlying it. This includes (without limitation) any liability for any recoendation or information in the Certificate or any errors or omissions Intellectual Property and other rights WSAA does not undertake any assessment of whether the importation, manufacture, sale or use of the Product the subject of this Certificate infringes the intellectual property rights or proprietary rights of any person. Recipients of the Certificate should undertake their own assessment of whether (as relevant) the importation, manufacture, sale or use of the relevant Products infringe the intellectual property rights or other proprietary rights of any person. If the Product infringes intellectual property rights or other proprietary rights there is potential for the supply of the Products to be interrupted. From time to time WSAA and the other Publishers may receive notice of allegations that the importation, manufacture, sale or use of the Product infringes intellectual property rights or other proprietary rights. WSAA's policy is to not refer to such allegations in its Certificate or take any other steps to put Recipients on notice of such allegations. If, however, WSAA becomes aware that the allegations have been admitted or proved in Court, then WSAA may, at its discretion, take such steps as it considers appropriate. As such, Recipients acknowledge, agree and accept that WSAA may have information in its possession about intellectual property rights infringement allegations or other infringement allegations in relation to the Product which are not referred to or disclosed in this Certificate and which are not otherwise counicated to Recipients Need for independent assessment The information and any recoendation contained (expressly or by implication) in this Certificate are provided in good faith (and subject to the limitations noted in this Certificate). However, you should treat the information as indicative only. You should not rely on that information or any such recoendation except to the extent that you reach an agreement to the contrary with the Publisher(s). This Certificate does not contain all information that a person might require for the purposes of assessing any product discussed or appraised within it. The product appraisal criteria used in preparing this Certificate may not address all relevant aspects of the Product. Recipients should seek independent evidence of any matter which is material to their decisions in connection with an assessment of the Product and consult their own advisers for any technical information required. Any decision to use the Product should take into account the reliability of that independent evidence obtained by the Recipient regarding the Product. Recipients should also independently verify and assess the appropriateness of any recoendation in the Certificate, especially given that any recoendation will not take into account a Recipient s particular needs or circumstances. WSAA has not evaluated the extent of the product liability and professional indemnify insurance that the provider of the product maintains. Recipients should ensure that they evaluate the allocation of liability for product defects and any professional advice obtained in relation to the product or its specification including the requirements for product liability and professional indemnity insurance No Updating Neither the Publisher(s) nor any person involved in the preparation of this Certificate or the product appraisal criteria underlying it [has] [have] any obligation to notify you of any change in the information contained in this Certificate or of any new information concerning the Publisher(s) or the Product or any other matter No Warranty The Publisher(s) do[es] not, in any way, warrant that steps have been taken to verify or audit the accuracy or completeness of the information in this Certificate, or the accuracy, completeness or reasonableness of any recoendation in this Certificate. PA 1508 Issue 1 Rev 0 Page 2 of 17

3 SCHEDULE A APPENDIX A - PRODUCT CERTIFICATIONS Copies of the following Quality and Product Certification Certificates are available for downloading from the WSAA Members Only project portal website. SCHEDULE A1 - QUALITY MANAGEMENT SYSTEMS Business Location: AG + Co, Rheniumhaus Otto-Hahn-Str. 2, D Rehau, GERMANY There are 30 more locations of administration offices and plants included in this certification as detailed in the attachment. Quality Systems Standard ISO 9001:2008 Certificate Registration no Certifying agency First date of certification TÜV Rheinland Cert GmbH NA Current date of certification 29 June 2015 Expiry date of certification 28 June 2018 SCHEDULE A2 - QUALITY MANAGEMENT SYSTEMS Business Location: Pty Ltd PTY LTD, Suite 1.02, Level 1, Quad 1, 8 Parkview Drive, Sydney Olympic Park NSW 2127 Water Industry Standard WSA 137:2013 Certificate Registration no. AMI Certifying agency ApprovalMark First date of certification 30/11/2017 Original Certified 30/11/2017 Expiry date of certification 30/11/2022 Current Certification 30/11/2017 PA 1508 Issue 1 Rev 0 Page 3 of 17

4 SCHEDULE A SCHEDULE A3 MFPA WEIMAR GERMANY INSPECTION AND CERTIFICATION BODIES Testing facility: MFPA Official Testing Centre located in Weimar, Germany Certification Standard Certificate Registration No. Certifying agency First date of certification Current date of certification Expiry date of certification a) Inspection body - Type A to DIN EN ISO/IEC 17020:2012 b) Laboratory Accreditation DIN EN ISO/IEC 17025:2005 c) Certification Body - DIN EN ISO/IEC 17065:2005 a) D-IS b) D-PL c) D-ZE DakkS (Deutsche Akkreditierungsstelle GmbH) a) 8 May 2012 b) NA c) 7 November 2014 a) 19 December 2016 b) 19 December 2016 c) 7 November 2014 a) 18 December 2021 b) 18 December 2021 c) 5 November 2019 PA 1508 Issue 1 Rev 0 Page 4 of 17

5 TABLE B1 AWASHAFT DN 400 PP MS PRODUCT SCHEDULE Product Supplier Picture AWASHAFT DN 400/315 PP Chamber Base GD AWASHAFT DN 400/315 PP Chamber Base RML s AWADUCT DN 400/315 or DN 315/250 Offset Reducer with lip sealing ring; Material RAU-PVC 1100, Colour RAL 8023 red brown (optional item, not included in this appraisal, but included in PA 1508 Part 2) s AWADUCT KGB PVC- U Bend SN8 with lip sealing rings from 15 to 87 ; Material RAU- PVC 1100, Colour RAL 8023 red brown (AWADUCT PVC SN8 Classic Range to EN 1401 (equivalent to AS/NZS 1260) AWADUCT PP Ball joint continuously adjustable up to +/- 7.5 o horizontally or vertically with EPDM sealing rings (Safety- Lock) (optional item, not included in this appraisal; alternative PVC-U bends locally available to AS/NZS 1260) (optional item, not included in this appraisal, but included in PA 1508 Part 2) Extension pipe or riser DN 300 or DN 225 PVC-U DWV SN8 to AS/NZS 1260 Installer PA 1508 Issue 1 Rev 0 Page 5 of 17

6 Product Supplier Picture DN 150 PVC-U push-in socket plugs to AS/NZS 1260 for unused branch of triple inlet RML base unit Injection moulded DN 300 or DN 225 PVC-U SWJ push on cap to AS/NZS 1260 Injection moulded DN 300 or DN 225 PVC-U solvent weld on cap with screw lid and RR seal to AS/NZS 1260 PE Shroud Pipe (450 dia minimum) to AS/NZS 4130, Concrete Surround and Surface Fittings (DI access cover to AS 3996 Class B or D) Installer Installer Installer Installer The DN 400 GD chamber base measures 530 in length and 360 in height (reducer not included in this appraisal, but in PA 1508 Part 2) and the DN 400 RML measures 480 in length and 360 in height (reducer not included in this appraisal, but in PA 1508 Part 2.). FIGURE B1 AWASHAFT DN 400 PP MS BASE UNIT TABLE B2 AWASHAFT DN 400 PP MS BASE Chamber base unit DN Inlet / outlet DN/OD M () Z () N () Length () 2 () AWASHAFT DN/OD 400 GD chamber base (straight connecting passage) AWASHAFT DN/OD 400 RML (3 inlets, 1 outlet) PA 1508 Issue 1 Rev 0 Page 6 of 17

7 TABLE B3: AWASHAFT DN 600 PP MC PRODUCT SCHEDULE Product Supplier Picture AWASHAFT DN 600 PP Chamber Base as per the manufacturer schedule (refer to following pages) AWASHAFT DN 600 PP riser AWADUCT PP Pipes and Fittings (optional item, not included in this appraisal, but in PA 1508 Part 2) AWADUCT PP Pipes and Fittings (optional item, not included in this appraisal, but in PA 1508 Part 2) AWADOCK PP Fittings (optional item, not included in this appraisal, but in PA 1508 Part 2) Push on caps according to water agency requirements PE Shroud Pipe (800 dia minimum) to AS/NZS 4130, Concrete Surround and Surface Fittings (DI access cover to AS 3996 Class B or D) Installer Not included in this appraisal Installer not included in this appraisal PA 1508 Issue 1 Rev 0 Page 7 of 17

8 FIGURE B2 AWASHAFT DN 600 PP MC BASE UNIT TABLE B4 AWASHAFT DN 600 PP MC BASE Chamber base unit Bend DN/OD Inlet / outlet Effective height N h ¹ h 2 AWASHAFT PP DN/OD 600 chamber bases, straight ( Refer to Figure B2) straight FIGURE B3 AWASHAFT PP DN 600 PP MC BASE - RML90º, T-PIECE 90º,AG90º PA 1508 Issue 1 Rev 0 Page 8 of 17

9 TABLE B5 AWASHAFT PP DN 600 PP MC BASE - RML90º,T-Piece 90º,AG90º Chamber base unit Bend DN/OD Inlet / outlet Effective height N h ¹ h RML90º RM 270º ML90º RML90º/270º AG90º AG270º PA 1508 Issue 1 Rev 0 Page 9 of 17

10 FIGURE B4 AWASHAFT PP DN 600 PP MC BASE -30º,60º 90º Deflection TABLE B6 AWASHAFT PP DN 600 PP MC BASE 30º,60º 90º deflection Chamber base unit Angle deflection DN/OD Inlet / outlet Effective height N h ¹ h 2 30º Standard 60º º FIGURE B5 AWASHAFT PP DN 600 PP RISER PIPE TABLE B7 AWASHAFT PP DN 600 PP RISER PIPE Riser Pipe Installation D a D i Without Inliner PA 1508 Issue 1 Rev 0 Page 10 of 17

11 Riser Pipe Installation D a D i TABLE B8: AWASHAFT DN 800 PP MC PRODUCT SCHEDULE Product Picture Supplier AWASHAFT DN 800 PP Chamber Base as per the manufacturer schedule (refer to following pages) AWASHAFT DN 800 PP riser (with and without ladder) DN 800/625 PP cone Elastomeric seals for components a) DN800 lip sealing for top of the base unit b) DN160, 200, 250, 315 and 400 lip sealing ring for inlet/outlet c) DN800 lip sealing ring MOL PA 1508 Issue 1 Rev 0 Page 11 of 17

12 Product Picture Supplier for riser rings d) DN625 lip sealing ring for top of the cone AWADUCT PP Fittings (optional item, not included in this appraisal, but in PA 1508 Part 2) AWADUCT PP Fittings (optional item, not included in this appraisal, but in PA 1508 Part 2) AWADOCK PP Fittings (optional item, not included in this appraisal, but in PA 1508 Part 2) Push on caps according to water agency requirements Ladder This item is not included in the appraisal as DN800 is being assessed as MC and there is no man entry. Installer (not included in this appraisal) (not included in this appraisal) Rehau supplies the ladders. The supports of Ladders are injection moulded into the risers. The steps are assembled PA 1508 Issue 1 Rev 0 Page 12 of 17

13 Product Picture Supplier 1000/800 polymer bearing ring DN625 to EN Material Polymer, Grey colour FIGURE B6 AWASHAFT PP DN 800 MC STANDARD BASES TABLE B9 AWASHAFT PP DN 800 MC STANDARD BASES Chamber base unit Bend DN/OD Inlet / outlet Effective height N Weight kg ºGD PA 1508 Issue 1 Rev 0 Page 13 of 17

14 Chamber base unit Bend DN/OD Inlet / outlet Effective height N Weight kg RML90º RM 270º ML90º RML90º/270º AG90º AG270º PA 1508 Issue 1 Rev 0 Page 14 of 17

15 FIGURE B7 AWASHAFT PP DN 800 PROJECT SPECIFIC BASES - STRAIGHT TABLE B10 AWASHAFT PP DN 800 PROJECT SPECIFIC BASES - STRAIGHT Chamber base unit DN/OD Inlet / outlet Effective height N weight STRAIGHT FIGURE B8 AWASHAFT PP DN 800 PROJECT SPECIFIC BASES - ANGLED PA 1508 Issue 1 Rev 0 Page 15 of 17

16 TABLE B11 AWASHAFT PP DN 800 PROJECT SPECIFIC BASES - ANGLED Chamber base unit DN/OD Inlet / outlet Effective height N weight ANGLED (Max 45º) (Max 30º) FIGURE B9 AWASHAFT PP DN 800 CONE TABLE B12 AWASHAFT PP DN 800 CONE CONE Version N max H Min weight DN800 Without ladder PA 1508 Issue 1 Rev 0 Page 16 of 17

17 FIGURE B10 AWASHAFT PP DN 800 RINGS TABLE B13 AWASHAFT PP DN 800 RINGS RINGS Version Effective Length N weight Inc Vertical latter Inc Vertical latter Inc Vertical latter DN800 Inc Vertical latter Inc Vertical latter Inc Vertical latter Inc Vertical latter PA 1508 Issue 1 Rev 0 Page 17 of 17