DURATAPE TM RGB IP66 OUTDOOR

Transcription

1 Key Features Flexible flat conductor strip with High Output Red 625nm, Green: 520nm, Blue: 465nm LEDs, RGB colors Ideal for exterior cove, under-counter/cabinet, lighting accents Complete with encased silicone jacket for outdoor rated IP66 Sold per foot and manufactured to specified lengths with factory attached end preps All Duratape features 2-circuit substrate for optimum heat dissipation, minimizing voltage drop while increasing run lengths per power feed, standardizing electrical flow over entire length of the strip for maximum product reliability All Duratape features double sided solder points for maximum conductivity and durability Pre-assembled to specific lengths with various connector options for project requirements and efficient power configuration Max continuous length: up to 16 per run DMX 512 interface available Dimensional Drawings 0.66" O.C. Field cut possible every 4. Caution! Field cutting should only be done before power is connected. 0.56" 0.17" RGB Details Spacing LEDs 0.66 OC LED Spacing 18 LEDs per foot End Preps Factory preped end preps available (See Page 2) Mounting Installation Power Supply Listing Compliance Warranty DURATAPE TM RGB RGB Tapelight LED Tapelight strip emits sharp, color changing effects in outdoor niche, cove and architectural decorative applications. Includes installation-ready 3M tape adhesive for simplified installation directly to mounting channel or application surface Optional aluminum channels with base and cover (for damp weather protected areas only) can be used to install decorative, protective covers Listed Class II 24 VDC power supply required culus / CE listed ROHS compliant 3 year warranty Duratape features double-sided solder points for maximum continuity for long lifespan. tape Static Indoor. With option PVC sleeve LED Data Model Wattage Viewing Angle Lifespan at 90% drive Standard 4.4W/ft 0.24W per LED ,000hrs * LEDs operating at 90% of LED manufacturers maximum current rating. pe Static Indoor. With option PVC sleeve Fixture Data Model Efficacy Lm/Wt Lm/Ft Wt/Ft Wt/LED RGB Ordering Guide PRODUCT CODE INTENSITY WATTAGE IP RATING LED COLOR VOLTAGE + END PREP + MOUNTING + DL Duratape HO High Output W/ft O Outdoor IP66 RGB Red: 625nm, Green: 520nm Blue: 450nm VDC POWER SUPPLY Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 1 of 8

2 End Preps and Connectors A B C D Required end preps: (One required for each run of tape) A 07UX3CBL1 (3-circuit RGB) Single 3 circuit lead wire prep. 24 four conductor Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. 07UX3ADDCBL: ADDITIONAL LEAD WIRE (3-circuit RGB) Additional lead wire purchased per foot and factory attached to specified run leads. Lead wire can be field cut to desired length. B 07UX3CBL2 (3-circuit RGB) Double ended 3 circuit lead wire prep. 24 four conductor lead wire at both ends. One end can be used for power connectivity while the other end can be used for interconnection to run to an additional length of Duratape. 07UX3ADDCBL: ADDITIONAL LEAD WIRE (3-circuit RGB) Single 3 circuit lead wire prep. 24 four conductor Lead wire/dead end allows for connection to power at lead end and field trim of Duratape product at the other end. C 07UX3FOLDCBL-XX (3-circuit RGB) 3 circuit wire fold (specified length). Wire folds are factory attached to Duratape to meet your specified installation requirements. Wire fold lengths available are 2, 3, 4, 6, 12. Add length number to end of part number. Optional Connectors: D 07UX3ADDCON (3-circuit RGB) Additional 3 circuit connectors. Lead wire connectors 3/ea per connection. Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 2 of 8

3 Profiles DL-ALUM-U-6 Low profi le aluminum U-Channel for linear run lengths. Available in 6 lengths. 1/2 ID, 5/8 OD, 1/4 H DL-ALUM-L-6 Aluminum L-Channel 1/2 x 1/2 for linear run lengths. Duratape can be mounted at either 0º or 90º mounting positions. Available in 6 lengths. DL-I-MCHAN-4 Linear Mounting channel. Available in 4 lengths. DL-I-45-MCH-4 45 mounting base for 45 mounted linear applications. Available in 4 lengths Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 3 of 8

4 Profiles PRAP66 Surface mount aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diffuser cover. Available in 6 lengths. KTPRAP66 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length termination. PRIN66 Flush mount aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diffuser cover. Available in 6 lengths. KTPRIN66 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length termination. PRAN66 45º aluminum channel. Anodized aluminum rigid profi le complete with opal translucent diffuser cover. Available in 6 lengths. KTPRAN66 Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length termination. PRINTC Surface mounted continuous illumination aluminum channel. Includes frosted polycarbonate cover for shadowless light distribution. Available in 1M lengths. KTPRINTC Mounting Kit: (10) mounting clips for aluminum channel, (5) end caps with hole for interconnectivity, (5) end caps with no hole for run length termination DL-ALUM-C-6 Surface mounted two-piece continuous illumination channel. ½ x ½ aluminum U-channel with 6 OC screw holes. Snap in full diffusion lens for shadowless light distribution. Sold in 6 lengths. PRINCG Flush Mount aluminum profi le for installation in plasterboard. Complete with white lens. Available in 6 lengths. Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 4 of 8

5 DURATAPE TM RGB Profile Accessories - (For use with PRAP66 & PRINTC profiles) *Shown with PRAP66 Channel ADJUSTABLE STRIP SUPPORT A set of two adjustable supports for aluminum profiles. Allows the profile to be adjusted up to 90º. Used to position a profile at a distance from the wall/ceiling DL-OR-DEVKT68 Pair of stainless steel fixing brackets for profiles for IP68 strips. DL-PRADJ-SPIKE Ground stake, mounts to bottom foot of adjustable bracket. For use in planter area, 4¼ long. Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 5 of 8

6 Profiles PRDE Surface mounted double emission aluminum profile with dual opal lenses. Dual tape illuminating (two runs of tape) in opposite directions. Set of two end caps included. Available in 4 lengths. PRDSAP Surface mounted aluminum profile with dome opal lens. Dual tape illumination (two runs of tape). Set of two end caps included. Available in 4 lengths. PRDSAN Surface mounted 45º aluminum profile with domed opal lens. Dual tape illumination (two runs of tape). Set of two end caps included. Available in 4 lengths. Surface Mount Wall Surface Mount Ceiling Surface Mount Corner Horizontal or Corner Vertical Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 6 of 8

7 Power Supply Product Code Type Wattage Voltage Dimmable Listing Dimensions DEL-X RGB DEL-X RGB DEL-X RGB DEL-X DEL-X DEL-X Electronic Power Supply with RGB Interface in NEMA3R Enclosure Electronic Power Supply in NEMA3R Enclosure 1 Interface sold separately * Dimensions include enclosure with mounting bracket ** 4A maximum current protection for each seconday circuit *** Constant voltage drivers 50HZ, voltage regulated with short circuit protection. operating temperature -40 C- 80 C 96W / 1X4A** V AC / 24V DC Non-Dimmable culus 10 W X 10 L 4 D* 192W / 2X4A** 288W / 3x4A** 96W / 1X4A** 192W / 2X4A** 288W / 3x4A** DEL Electronic Stand Alone 96W / 1X4A** UL/CE 2.67 W X 9.66 L 1.53 D Electronic Driver Interface Electronic Driver in Enclosure ZXC-DMX RGB Dimming Interface Product Code Application Voltage Type Listing Dimensions ZXC-DMXW Indoor 24V DC RGB, RGBW or RGB+W Interface culus 6.60 L X 2.00 W X 0.87 D Wall Touch Controller (Optional) Product Code Type Application Voltage Listing Dimensions Number of DMX Channels ZKTPC-RGBW TGDMXSLESAU9 DMX Preset Controller Touchpad Stand Alone DMX Programmable Controller with Easy to Use Software Interface Number of areas Indoor 5V DC culus 4.20 W X 5.75 H X 0.40 D Indoor 5.5V DC ETL, UL 5.30 W X 5.50 H X 1.90 D Number of scenes ZKTPC-RGB DMX Controller Slesa U9 Controller Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 7 of 8

8 Electronic Driver Power Supply Line Voltage Input UL listed J-box by others Wiring from transformer to J-box must be to Class II standard. Refer to NEC and local code requirements. Duratape System Layout Example Diagram Positive Negative Hot Neutral Ground Electronic Power Supply with integral RGB Interfaces Targetti USA - A Targetti Group Company A W. 17 th St. Costa Mesa, CA Phone (714) targettiusa@targetti.com Page 8 of 8