VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
|
|
- Daniela Whitehead
- 5 years ago
- Views:
Transcription
1 VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold is the next generation of the ACCU-Mount System for natural gas, liquid or steam measurement applications. Designed for close-coupling DP or multi-instruments (, pressure, electronic flowmeter, etc.) to senior and junior orifice changers and/or orifice-flange unions. The Large Bore IntelliMount is available in renewable metal or soft seat configurations and features either GRAFOIL or Teflon stem packings. The Large Bore IntelliMount s superior design reduces the number of leakpoints and overall installation weight in relation to the former ACCU-Mount modular manifold system. Furthermore, the Large Bore IntelliMount is factory assembled and tested, decreasing required costly field-installation time. The Large Bore IntelliMount used with Coplanar transmitters features unique patented integral differential pressure/ pressure adapter plates. This feature eliminates the otherwise required Coplanar adapter flange, removing a potential leakpoint and unnecessary weight. Features and benefits Enhanced transmitter performance - close coupled straight through 3 /8 " [10 mm] bore to transmitter, reducing gauge line error. Provides required spacing for installation via Sr. Orifice Changers without the otherwise required spacer flanges or manifolds. Optional rating to FIRESAFE API 607. Coplanar flange (Rosemount 305) elimination system available. Two-piece modular system affords permanent protection of Rosemount 305 diaphragms during maintenance procedures. No additional brackets or pipe support required. Maximum two-piece system, regardless of the number of required instruments. The DP and Gauge Pressure adapter plate integral to the manifold system eliminates the otherwise additional required flange connectors, reducing leakpoints, installation time, required components and weight. Elimination of impulse lines - direct mount system. Post installation instrument retrofit capability. Mounts all manufacturers field instruments i.e., Rosemount, Yokogawa, Smar, Taylor, Bailey, Moore, Honeywell and Foxboro. Elimination of conventional root block valve block system. Modular design allows for system hydrotest, and certification while affording instrument protection/ controlled storage until commissioning. Total installation, including transmitter, ships in one package to the field. AGIMC-0347-US-1303 Copyright 2013 Pentair
2 Leak Point and Weight Comparison Leak points comparison Reduction of leak points by 50% Weight reduction of 60% Installation space requirements reduced by 40% Easier installation Large bore intellimount: AF/5GDB Dual Installation of Differential and Gauge Pressure Coplanar Transmitters Materials Technical data Standard Material Traceability Standard material traceability to EN , , instrument and isolation/block modules bodies only. Valve Packings and Flange Seals Teflon (Standard) Maximum pressure: 6,000 psig [414 barg] Maximum temperature: 500 F [260 C] GRAFOIL (Optional) Maximum pressure: 6,000 psig [414 barg] Maximum temperature: 1000 F [538 C] Seat Temperatures Delrin 200 F [93 C] maximum Teflon 500 F [260 C] maximum PEEK 400 F [204 C] maximum Standard SS Valve Body 316 SS Bonnet 316 SS Stem 316 SS Non-Wetted Parts Austenitic SS CS Valve Body A105 CS Bonnet 316 SS Stem 316 SS Non-Wetted Parts Austenitic SS Special For severe service, manifolds are available in the following exotic materials: Monel Alloy 400 Duplex S31803 Hastelloy C276 Bolting All IntelliMount assemblies are supplied with high tensile steel bolts as standard. Optional stainless steel bolts (B8M Class 2) are available; please specify when ordering. = Potential Leak Points Conventional direct mount: = Potential Leak Points Notes: 1. Coplanar is a trademark of Rosemount, Inc. 2. Delrin and Teflon are registered trademarks of E.I. dupont de Nemours and Company. 3. GRAFOIL is a registered trademark of Graftech International Inc. 4. Hastelloy is a registered trademark of Haynes International. 5. Monel is a registered trademark of Special Metals Corporation. 6. Viton is a registered trademark of DuPont Performance Elastomers. page 2 AGIMC-0347-US-1303 Copyright 2013 Pentair
3 Dimensions, inches [mm] Horizontal Shown AF/3B Style Single block for use with biplanar transmitters. 8.1 [206] 10.9 [277] AF/5GDB Style Single block for dual mounted biplanar transmitters. G/P 10.5 [267] 14.0 [356] AFD/5GC Style Double block for Coplanar transmitters. 9.3 [336] AFS/5GC Style Single block for Coplanar transmitter [310] 11.2 [284] 9.3 [236] AFD/5GDB Style Double block for dual mounted biplanar transmitters. G/P 12.2 [310] 8.9 [226] 14.0 [356] 10.9 [277] Standard Configuration Block Configuration Copyright 2013 Pentair AGIMC-0347-US-1303 page 3
4 Bonnet Technology Valve technical specifications The IntelliMount features high performance valves for reliable bubble-tight performance. Isolation is achieved with the H series plug valve or the optional Fire-Safe P (use FS designation for Fire-Safe service) non-rotating stem bonnet assembly. ing and equalizing are achieved with the H7/H5 needle/globe valve. Features and benefits Body to bonnet pressure seals below threads preventing process from corroding bonnet retention threads which are loaded in compression for additional strength. Back seat design provides secondary stem seating and prevents stem blowout. Adjustable gland follower allows easy access to adjust the packing gland. Stem threads are located above the stem packing and are completely isolated from the process. Stem packing with GRAFOIL or Teflon for bubble-tight sealing. Optional Fire-Safe block valves to AP H5 bonnet for venting and equalize service Needle valve 0.14" [3.5 mm] bore Rotating stem and plug Soft or metal seats Soft seat - Delrin, Teflon, PEEK Hard seat - 316/316L SS PTFE Stem Packing H7 bonnet for venting and equalize service Needle/globe valve 0.2" [5.0 mm] bore Free swivel ball end stem -71 F to 1000 F [-57 C to 538 C] Weather Resistant Plastic Cap (PTFE Packed only) Stem Packing Below the Threads Bonnet Lock Pin Metal Seat for High Temperature Applications Bonnet Lock Pin Bonnet-to-Body Metal Seal H bonnet for isolation service Rising plug valve 3 /8" [10 mm] bore Rotating stem and plug Soft or metal seats Soft seat - Delrin, Teflon, PEEK Hard seat - 316/316L SS P bonnet for Fire-Safe service API 607 Fire-Safe Rising (non-rotating stem) plug valve 3 /8" [10 mm] bore Hard seat - 316/316L SS Weather Resistant Metal Cap Weather Resistant Metal Cap Non-Rotating Stem Bonnet Lock Pin Packing Stem Packing Below the Threads Rising Plug Non-Rotating Plug page 4 AGIMC-0347-US-1303 Copyright 2013 Pentair
5 Stabilized Connectors (Futbols) The Anderson Greenwood Stabilized Futbol/Connector (AGSF) is used as the connection between a orifice fitting or flange and manifold on direct mounted differential pressure measurement installations. The AGSF unique design provides support of the entire installation while transferring the radial-stress load away from the NPT connections. The AGSF comes in both a short and a long version for clearance requirements (crank handles, Simplex style clamping bar, orifice plate housing, etc.). Features and benefits Unique design provides support of the entire installation while transferring the radial-stress load away from the NPT connections. Quick, easy, one-handed installation. Large footprint reduces radial-stress load on the NPT threads. Slotted bolt holes accommodate 2 1 /8" to 2 1 /4" bolt spacings. Available with dielectric shielding which provides a non-conductive barrier between the instrument and the orifice fitting. Universal design for both vertical and horizontal mount configurations. Available in standard length (4") or extended length (5.6") for additional clearance requirements. Oxygen or chlorine cleaning available. Available in stainless or carbon steel construction. High temperature (GRAFOIL ) flange gaskets available. No special tools required for installation. Ordering Information for Futbols Body Length S Short (standard clearance - overall length 4.0" [101.6 mm]) L Long (additional clearance - overall length 5.6" [142.4 mm]) Construction Material S A351-CF8M (316 SS) C A216-WCB (CS) Dielectric Shielding Option DI-D Dielectric Shielding - Delrin Construction AGSF L S DI-D SSC Options H OC SSA 1 SSB SSC 1 GRAFOIL Gaskets (not available with incorporation of dielectric shielding option) Cleaned for oxygen service SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg] 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg] Notes: SS bolts lower pressure ratings to a maximum of 4500 psi [310 barg]. Consult factory for full rating with 316 SS bolts. 2. All standard AG stabilized connectors include Teflon gaskets. 3. All standard AG stabilized connectors include Carbon Steel A193 B7 bolts. Copyright 2013 Pentair AGIMC-0347-US-1303 page 5
6 Ordering Information (patent pending) IMS AF 5GC H V I S 4 FS Style AF Direct Mount (Flange x Flange) 3 /8" [10 mm] full bore TF Remote Mount (Pipe x Flange) 3 /8" [10 mm] full bore AFD Direct Mount, Double Block and Bleed (Flange x Flange) 3 /8" [10 mm] TFD Remote Mount, Double Block and Bleed (Pipe x Flange) 3 /8" [10 mm] Type 2 2-Valve Gauge Pressure Rosemount 305 2B 2-Valve Gauge Pressure Biplanar 2C 2-Valve Gauge Pressure Rosemount 305 with no Coplanar flange 3 3-Valve Rosemount 305 3B 3-Valve Biplanar 3C 3-Valve Rosemount 305 with no Coplanar flange 5G 5-Valve (Gas) Rosemount 305 5GC 5-Valve (Gas) Rosemount 305 with no Coplanar flange 5GB 5-Valve (Gas) Biplanar 5GD 5-Valve, Dual Mount DP and Gauge Pressure Rosemount 305 5GDC 5-Valve, Dual Mount DP and Gauge Pressure Rosemount 305, with no Coplanar flange 5GDB 5-Valve, Dual Mount DP and Gauge Gas Biplanar 5P 5-Valve (Power) Rosemount 305 5PB 5-Valve (Power) Biplanar 5PC 5-Valve (Power) Rosemount 305, with no Coplanar flange Tap Orientation H Horizontal V Vertical Packing V Teflon E Low Emissions Graphite H GRAFOIL Seat IS 316 SS Seat on Block and TI Teflon, Block Module only Integral on Instrument Module EI PEEK, Block Module only DI Delrin, Block Module only Material S 316 SS/316SSL M Monel C CS End Connection (IMSTF or IMSTFD only) 4 1/2" Female NPT x Female Ports Options AM AGCO Mount Kit for 2-inch pipe stand mounting of manifold AMS 316 SS AGCO Mount Kit for 2-inch pipe stand mounting of manifold BL Bonnet Lock Device (patent protected) FS FIRESAFE to API 607 CL Cleaned for chlorine service OC Cleaned for oxygen service SSA 1 SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg] SSB 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating SSC Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg] SG3 (Sour Gas) meets the requirements of NACE MR0175/ISO (for Chloride conditions > 50 mg/l [ppm]) SP Special Requirements - please specify VALVES & CONTROLS Note: SS bolts lower pressure ratings to a maximum of 4500 psi [310 barg]. Consult factory for full rating with 316 SS bolts WAYZATA BLVD # 800, MINNEAPOLIS, MN All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. page 6 AGIMC-0347-US-1303 Copyright 2013 Pentair
ANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
More informationManifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
More informationANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
More informationNatural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
More informationAnderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
More informationANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
More informationANDERSON GREENWOOD INSTRUMENTATION PRODUCTS INSTRUMENT VALVES PRODUCT OVERVIEW
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS INSTRUMENT VALVES PRODUCT OVERVIEW ISSUED NOVEMBER 2012 Leading Instrument Valve Solutions Anderson Greenwood Instrumentation is your best choice for Instrument
More informationAnderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
More informationAnderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
More informationAnderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
More informationAnderson Greenwood M1/M110 Differential Pressure Manifolds
A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1
More informationStatic Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
More informationGauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
More informationStatic Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
More informationANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
More informationAnderson Greenwood Instrumentation Products - Manifolds and Accessories
Anderson Greenwood Instrumentation Products - Manifolds and Accessories Total Flow Control Solutions Flow, Static Pressure and Liquid Level Manifolds Flow Control ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS
More informationGeneral Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
More informationKerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
More informationInstrumentation Products Overview. Flow Control
Instrumentation Products Overview Flow Control World Leading Instrument Valve Solutions Century Valve is the number one choice for Instrument Valves and Manifolds; number one for range of products and
More informationANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
More informationAnderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
More informationAnderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
More informationGeneral Specifications
General Specifications GS 22B01C53-01EN-A M-675, M-775 and M-678 5-Valve Manifolds for Natural Gas Differential Pressure INTRODUCTION The PGI 5-Valve manifolds are designed for natural gas service and
More informationANDERSON GREENWOOD H7/H71 HAND VALVES
3 /16 (4.8 mm) orifice hard-seated hand valves for pressures to 6000 and 10000 psig (414 and 689 barg) FEATURES H7 GENERAL APPLICATION H7 series valves are designed for safe, repetitive bubble-tight closure,
More informationP3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
More informationStatic Pressure Manifolds PTM and PT7 2-Valve Manifolds
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds PT7 PTM Product Overview The PT Two-Valve Calibration Manifolds are used on static pressure transmitters, switches or gauges. The shutoff valve,
More informationRosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev LA Catalog Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
More informationDistributed By: M&M Control Service, Inc
The KM1 is a 3-valve manifold designed for applications where direct mounting to an instrument is impractical or undesirable. This style manifold is mounted to the lines from the instrument and signal
More informationANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
More information3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated
M50 and H70 ANDERSON GREENWOOD 3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated Features and Benefits Cost savings are realized as the root valves are in-line
More informationP3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD
3-VALVE MANIFOLD 3/16 and 3/8 Bore 3-valve Manifold The 3-valve hard seat manifold designed for instrument calibration incorporates two shut-off valves and an equalizing valve in a single body. The manifold
More informationMulti-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
More informationRosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev NB January Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationRosemount Manifolds. Rosemount Manifolds. Product Data Sheet , Rev MA August Contents
Product Data Sheet Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and inline designs Integral design enables flangeless valve integration 2, 3,
More informationHexagonal Bar Stock Needle Valve
Hexagonal Bar Stock Needle Valve HBNV Series Features Maximum working pressure: 6000 psi (414bar) at 100 F (38 C) 10000 psi (690bar) at 100 F (38 C) Working temperature: -65 F (-54 C) to 464 F (240 C)
More informationRosemount Manifolds. Product Data Sheet October , Rev PB. Factory assembled, leak-tested, and calibrated
Product Data Sheet October 2014 00813-0100-4733, Rev PB Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
More informationRosemount Manifolds. Product Data Sheet September , Rev PA. Factory assembled, leak-tested, and calibrated
Product Data Sheet September 2014 00813-0100-4733, Rev PA Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs
More informationProduct overview. Technical data
VALVES & CONTROLS ANDERSON GREENWOOD BLANKETING SYSTEMS The Complete Blanketing and Safety Valve System! Product overview Pad Valves Anderson Greenwood is a world leader in tank protection and blanketing.
More informationManifold Valve Accessories
Accessories Manifold Valve Accessories DIELECTRIC KITS The dielectric kit is designed to maintain the integrity and reliability of the pipeline and piping system through safety and corrosion protection.
More informationTBV Instrumentation Valves
TBV Instrumentation Valves A TBV Instrumentation Valves Cameron s TBV instrumentation valves were developed in response to concerns expressed by plant engineers. Common problems such as irregular center-to-center
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationSolution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Integral Block & Bleed Valves 2 Integral Block &
More informationEnclosures and Sunshades
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Enclosures and Sunshades EM Manifolds Accessories and Mounting To maintain the integrity of process measurement instrumentation, protection from the effects
More informationTBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument
More informationInstrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
More informationHOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
More informationInstrumentation Products Soft Seated Needle Valves and Manifolds
Instrumentation Products Soft Seated Needle Valves and Manifolds Introduction Introduction The AS-Schneider Group with its headquarters in Germany is one of the World's Leading Manufacturers of Instrumentation
More informationinstrument manifolds Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8
Instrument Manifolds Index General Purpose Manifolds Overview 1 2 Valve 2 3 Valve 4 5 Valve 6 Mounting kits 8 Special Application Manifolds Trifold 3 Valve 9 Rotofold 3 Valve 12 Pentafold 5 Valve 15 Mounting
More informationInstrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
More informationPROCHEM Stainless Steel Specialists
PROCHEM Stainless Steel Specialists Product solutions for a world of difference INSTRUMENTATION AGCO PIPING PRODUCTS INSTRUMENTATION VALVES AND ACTUATORS MANUFACTURING INDENT SERVICE HYDRAULIC ANDERSON
More informationInstrumentation Products. Schneider DirectMount Systems
Instrumentation Products Schneider DirectMount Systems Introduction Introduction Natural Gas Measurement - Best Practices Field research and testing conducted by Southwest Research in San Antonio, Texas
More informationRosemount Manifolds. Product Data Sheet April , Rev PC. Factory assembled, leak-tested, and calibrated
Product Data Sheet pril 2015 00813-0100-4733, Rev PC Rosemount Manifolds Factory assembled, leak-tested, and calibrated Full breadth of offering including integral, conventional, and in-line designs Integral
More informationMCF BALL VALVES OVERVIEW
MCF BALL VALVES OVERVIEW ISSUED JULY 2014 MCF BALL VALVES OVERVIEW THE CENTER OF MCF MODULAR THREE-PIECE VALVE CONSTRUCTION, ISO 5211 TYPE BODY CONFIGURATION, ACCOMMODATES A WIDE CHOICE OF SEATS, SEALS,
More information.187" Orifice PART NUMBER DESCRIPTION BONNET MATERIAL SEAT STEM SEAL
Options Bonnet Lock Plate Anti-Tamper Bonnet The Bonnet Lock Plate provides a more positive bonnet-locking device than the standard roll pin. The Anti-Tamper Bonnet Handle allows the bonnet stem to be
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationP R O C E S S V A L V E S. TBV Instrument Valves TBV
TBV Instrument Valves TBV TBV s Process / Instrument Valves were developed in response to concerns expressed by plant engineers. Common problems such as center-to-center spacing in Differential Pressure
More informationContents. General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts
Contents General Arrangements 1 Horizontal Mounts 2 Vertical Mounts 3 Transmitter and Adapter Mounts Manifolds 4 Ordering Tree 5 Pressure vs. Temperature Ratings 6 5-Valve Manifold Overview 8 5-Valve Manifold
More informationTBV Series Diverter and three-way ball valve
TBV Series 5100 Diverter and three-way ball valve TBV Series 5100 Ball Valve The Cameron portfolio of TBV* valves includes the series 5100 diverter and three-way ball valve, which enables accomplishing
More information115 Series, Needle Valves, Single Block, Male x Male
115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,
More informationGauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GR Series 2-valve, 3-valve and 5-valve Manifold Series Nantong Naco Fluid Equipment Co.,LTD Pingchao Town, Tongzhou rea, Nantong City, jiangsu Province, China Tel:86-53-85400443
More informationINTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
More informationCASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES
Self-actuating pilot operated pressure reducing valve handling air, gas, and steam and accurate to within 1 /2% up to 3" and 1% for larger sizes. Description The G-4 regulator is a self-actuating pilot
More informationMANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
More informationRosemount 1195 Integral Orifice Primary Element
September 2014 Rosemount DP Flow Rosemount 1195 Integral Orifice Primary Element Rosemount 1195 Integral Orifice Primary Element utilizes a self centering orifice plate design to eliminate installation
More informationGeneral Specifications
General Specifications GS 22B01C06-01EN-A C13ST Manifolds for Traditional Mount Differential Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-3 and C13ST-5 manifolds are
More informationInstrumentation Manifold Valves
Instrumentation Manifold Valves SM2V / SM3V / SM5V Series Ordering Information Example : SM2 V - F 8N - M40 1 2 3 4 5 1. Valve Series 2. Mounting Type 3. End Connection Type SM2 : 2-Valve Manifolds SM3
More informationT-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet
T-Bar Bonnet Gas Solution bonnet with non-rotating Metal Stem Tip The Gas Solution bonnet protects the internal and external threads. Moreover, the bonnet thread is less subject to wear, since it is not
More informationWKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
More informationAnderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves
ANDERSON GREENWOOD Series 5100 Modulating Safety Relief Valve Anderson Greenwood has developed the revolutionary Series 5100 specifically to serve Economizer applications requiring pressure relief under
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationGeneral Specifications
General Specifications GS 22B01C05-00EN-A C13ST Manifolds for Traditional Mount Gauge and Absolute Pressure Transmitters Designed and manufactured by AS-Schneider, Yokogawa C13ST-2 2-Valve manifolds are
More informationMonoflanges. Page 1. Rev. 0-0
Monoflanges Page 1 Rev. 0-0 2016 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to
More informationValve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51
Valves and protective devices Valve manifold for differential pressure measuring instruments 3-, 5-valve manifold Models IV30, IV31, IV50 and IV51 WIKA data sheet AC 09.23 Applications Shut-off, pressure
More informationDouble Block and Bleed Manifolds and Flanged Products. Catalog 4190-FP October 2003
Double Block and Bleed Manifolds and Flanged Products Catalog 4190-FP October 2003 Contents Page 3 Introduction. Page 4/5 Application illustrations. Page 6 Ball valve specification. Page 7 Outside screw
More informationInstrument Manifold Systems
www.swagelok.com Instrument Manifold Systems Instrument, Direct, and Remote-Mount Manifolds and Modular Systems V, VB, and VL series 2-, 3-, and 5- instrument manifolds VE series 2-, 3-, and 5- direct-mount
More informationPERFECTION IS OUR STANDARD...
PERFECTION IS OUR STANDARD... WELCOME TO COLSON X-CEL LTD Providing Precision engineering solutions for the most demanding environments Colson X-Cel Ltd is a well established and most highly respected
More informationSolution Partner. Leak - Proof Flow & Control. Manifold & Gauge & Rising Plug Valves. W e. s u p p o r t. t h e
W e. s u p p o r t. t h e i n n o v a t i o n s. o f. c u s t o m e r s Leak - Proof Flow & Control The Best Partner for Value Creation Solution Partner Manifold & Gauge & Rising Plug Valves 2 Manifold
More informationPage 1 Worldwide Rev e
Worldwide Page 1 Page 2 Bonnet Non-rotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling
More informationGauge Valves and Instrumentation Manifolds
Gauge Valves and ation Manifolds GV, GVH, GR Series 2-valve, 3-valve and 5-valve Manifold Series FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr. 5, 6369 Offenbach am Main, Germany Tel.: +49
More informationStep One: Select Stabilized Connector
Step One: Select [ ] STEP ONE Starting from your orifice fitting or flange, the first item required for DMS is the. The provides the foundation for your DMS and you must select the proper model for your
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationThe 7100B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction
VALVES & CONTROLS VAREC 00B SERIES The 00B Series is designed to protect low pressure storage tanks and systems from being overpressured. Introduction The Varec 00B Series is a pressure relief valve designed
More informationTBV Series 2000 Flanged Ball Valve
TBV Series 2000 Flanged Ball Valve TBV Series 2000 Flanged Ball Valve Cameron s TBV Series 2000 flanged ball valve is a unique standard port flanged ball valve, offering almost unlimited versatility with
More informationDual Chamber Orifice Fitting
Dual Chamber Orifice Fitting Sure Shot Dual Chamber Orifice Fitting 1 11 2 3 10 4 9 8 5 7 6 1. Top Clamping Bar Gasket: Seals easily by tightening square head clamping bar screws. Non- Asbestos flat gasket
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationModel descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Cast Iron Liquid Relief Valves Model 228 Model descriptions Model 91: Bronze trim, with pressure-tight cap. Suitable for maximum back pressure of 60
More informationInstrumentation Products Monoflanges & VariAS-Blocks
Instrumentation Products Monoflanges & VariAS-Blocks Introduction Introduction The AS-Schneider Monoflanges and VariAS- Blocks are designed to overcome the problems of traditional assemblies on primary
More information413 barg 38 C 200 barg 230 C psig 100 F 3000 psig 750 F
Model 101 Picture model: 101-06 Standard materials Body, Bonnet, Bellows (101-28) AISI 316 L Needle point Rotating ceramic ball Al 2O 3 Stem AISI 316 Ti with chromium-carbide diffusion coating Connections
More informationIntegral Block & Bleed Valves
www.hy-lok.com Catalog No. H-100PIV Feb. 2006 Integral Block & Bleed Valves 2003, 2006 HY-LOK CORPORATION All rights reserved Integral Block & Bleed Valves Contents INTRODUCTION 3 APPLICATION & INSTALLATION
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More informationBushing Viton O-ring (Other material available) Anti-Static Device
API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by
More information3000F Series. Full Port 2-Way 3-pc Body
Up to 4 psi WOG (275 bar) 3F Series 3F-xxx Series Valve Features Up to 4 psi service Special barstock body material options including Alloy 2, Duplex, Hastelloy C, Monel, Titanium, 254 SMO, Bronze and
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More informationBlock-and-bleed valve 2-valve manifold Models IV20 and IV21
Valves and protective devices Block-and-bleed valve 2-valve manifold Models IV20 and IV21 WIKA data sheet AC 09.19 Applications Shut off and vent pressure measuring instruments For gaseous and liquid aggressive
More informationManifold Valves. Important!
Manifold Valves mar Manifold Valves use the high-pressure needle valve, with a non-rotating tip. Therefore, the galling of the tip in seat is eliminated. It solves the main leaking problem found in rotating
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationTRANSMITTER ATTACHES TO THIS SURFACE
FIELD DEVICES - PRESSURE Product Specifications Logo PSS 3-5A1 B Model IFOA Integral Flow Orifice Assembly Used with I/A Series or Pneumatic d/p Cell Transmitters PNEUMATIC TRANSMITTER TRANSMITTER ATTACHES
More information