P R O C E S S V A L V E S. TBV Instrument Valves TBV
|
|
- Elfreda Woods
- 5 years ago
- Views:
Transcription
1 TBV Instrument Valves TBV
2
3 TBV s Process / Instrument Valves were developed in response to concerns expressed by plant engineers. Common problems such as center-to-center spacing in Differential Pressure installations, visual position indication, plugging of impulse lines and tamperproofing have been eliminated with our instrument valve line. The center-to-center spacing problem arises in competitive designs since the bonnet must be removed from the body in order to screw the valve into the orifice flange next to another valve. TBV has solved this problem: selected models of our instrument valves can be installed on 2 1/8" centers by simply removing the mating valve handle leaving the valve s pressure vessel integrity intact. TBV s tamperproof Process / Instrument Valves have safety features such as: (1) oval safety handle for visual position indication which allows easy position identification while maintaining safety against accidental operation and (2) full penetration and welded design which assures the body parts can never be separated. VARIOUS END CONNECTIONS AVAILABLE INTERNAL ENTRY BLOW OUT PROOF STEM HIGH STRENGTH FORGED OR INVESTMENT CAST BODY OVAL SAFETY HANDLES WELDED TAMPERPROOF CONSTRUCTION 1
4 SERIES 4100 LOCK WASHER HANDLE STOP BELLEVILLE WASHER FOLLOWER BODY STEM SEAL BALL THRUST BEARING BODY SEAL STEM ENDPLATE End Connections available: 1/2", 3/4" and 1" (15, 20 and 25 DN) sizes in Butt weld, Socket weld, FNPT and Flanged ASME Classes 150, 300, 600 and psi WOG rating. BILL OF MATERIALS Part Description Material Body See Endplate How to Order Ball (page 20) Stem Follower Seat Stem Seal Stop Carbon Steel Plated Stem Nut Handle Carbon Steel Plated Thrust Bearing 15% Glass Filled PTFE Lock Washer 400 SS Body Seal Virgin PTFE Belleville Washer 17-7 SS WELDED VALVE 3/4" Body with 1/2, 3/4 or 1 Endplates Available. Designed specifically for the petrochemical process industry with safety being the prime consideration. The welded TBV Series 4100 features tamper-proof construction and rod out capability, along with TBV s standard internal entry stem design. An oval safety handle is standard with a lever handle optional. 2
5 SERIES 4100 APPLICATIONS Root Valve Gauge Valve Isolation Valve D MAJOR DIMENSIONS - IMPERIAL Valve Size in. Port A B C D 1/ / / / / Ø C MAJOR DIMENSIONS - METRIC DN Size mm Port A B C D PORT A B Note: If fire-safe is required, consult factory for port diameter. 3
6 SERIES 41/61 LOCK WASHER HANDLE STOP BELLEVILLE WASHER BODY FOLLOWER STEM SEAL THRUST BEARING BALL STEM End Connections available: 1/2", 3/4" and 1" (15, 20 and 25 DN) sizes in Butt weld, Socket weld, MNPT x FNPT or Flanges ASME Classes 150, 300, 600 and psi WOG rating. ORIFICE GAUGE VALVE ENDPLATE BODY SEAL BILL OF MATERIALS Part Description Material 1/4", 1/2, 1/2 x 3/4 or 1 Standard. The Series 41/61 is uniquely designed with all the inherent TBV ball valve features, such as: 1/4 turn operation, tamper-proof welded construction, internal entry stem and oval safety handle. The large straight-through port area permits easy rod out capability. Only the handle needs to be removed when installing on 2 1/8 center-to-center application. Body Endplate See How to Order Ball (page 20) Stem Follower Seat Stem Seal Stop Stem Nut Handle Thrust Bearing Lock Washer Body Seal Belleville Washer or Carbon Steel Carbon Steel Plated 15% Glass Filled PTFE 400 SS Virgin PTFE 17-7 SS 4
7 SERIES 41/61 APPLICATIONS Root Valve Gauge Valve Isolation Valve Drain Valve Orifice Valve 2.42 in. (61.5 mm) Ø 1.56 in. (39.6 mm) 1.41 in. (35.8 mm) Ø 0.41 in. (10.4 mm) 1.42 in. (36.1 mm) Dimensional drawing shown: 1/2 FNPT x 1/2 MNPT valve. Consult factory for other configurations in. (120.7 mm) 5
8 SERIES 6100 LOCK WASHER HANDLE STOP BODY STOP PIN BELLEVILLE WASHER FOLLOWER STEM SEAL BODY SEAL BALL THRUST BEARING ENDPLATE End Connections available: 1/2", 3/4" and 1" (15, 20 and 25 DN) sizes in Butt weld, Socket weld, FNPT or Flanged ASME Classes 150, 300, 600 and psi WOG rating. STEM BILL OF MATERIALS Part Description Material Body See Endplate How to Order Ball (page 20) Stem Follower Seat Stem Seal Body Seal Stop Stem Nut Handle Carbon Steel, Cad. Plated Thrust Bearing 25% Glass Filled PTFE Belleville Washer 17-7 SS Lock Washer 410 SS Stop Pin ORIFICE GAUGE VALVE Carbon Steel Body and End Plate are black oxide coated to resist corrosion. 1/2-1 STANDARD - OTHER SIZES AVAILABLE UPON REQUEST. The Series 6100 is a specially designed instrument valve for use in chemical and petrochemical industries as a gauge or isolation valve with tapped NPT side ports for flush and drain applications. Safety is a major concern in most industries and in response, TBV provides a tamper-proof, welded design, an oval handle to prevent accidental operation and a blow out proof bottom entry stem. The 6100 also incorporates a large straight-through port area for easy rod out capability. Only the handle needs to be removed when installing on 2 1/8 center-to-center application. 6
9 SERIES 6100 APPLICATIONS Root Valve Gauge Valve Isolation Valve Orifice Valve MAJOR DIMENSIONS 1/2 in., 1/2 in. x 3/4 in. (15 mm, 15 mm x 20 mm) Ends* EE** A 6.19 (157) 7.27 (185) * Dimensions for screw end, socket weld, and butt weld are equal. Dimensions from ASME Classes 150 and 300 flanges are equal. ** Extended end is designated as an EE in the ordering code. Dimensional drawing shown: 1/2 FNPT x 1/2 MNPT valve. Consult factory for other configurations. *3.68 in. (93.5 mm) *Ø 1.50 in. (38.1 mm) *2.30 in. (58.4 mm) 1/2-14 NPT THREAD BOTH SIDES 2.42 (61.5) *A *1.21 (30.7) *2.22 (56.4) 1/2-14 NPT THREAD *1.25 (31.8) FLANGED END (ASME CLASSES 150 OR 300) ENDPLATE OPTIONS BUTT WELD END SOCKET WELD END Valves can be mounted on 2 1/8" (54 mm) centers with removal of mating valve handle only. In common competitive globe body configuration, it is necessary to disassemble the bonnet from the body in order to screw the valve into the orifice flange next to another valve. TBV valves do not require disassembly, therefore factory integrity is not disturbed. 2 1/8 (54 mm) 7
10 SERIES 61/41/61 LOCK WASHER HANDLE STOP BELLEVILLE WASHER FOLLOWER STEM SEAL BODY ENDPLATE ENDPLATE BODY SEAL BALL BODY SEAL THRUST BEARING STEM End Connections available: 1/2", 3/4" and 1" (15, 20 and 25 DN) sizes in Butt weld, Socket weld, MNPT and Flanged ASME Classes 150, 300, 600 and psi WOG rating. BILL OF MATERIALS Part Description Material Body See Endplate How to Order Ball (page 20) Stem Follower Seat Stem Seal Stop or Carbon Steel Belleville Washer Stem Nut Handle Carbon Steel Plated Thrust Bearing 15% Glass Filled PTFE Lock Washer 400 SS Body Seal Virgin PTFE ORIFICE GAUGE VALVE 1/2-1 STANDARD - OTHER SIZES AVAILABLE UPON REQUEST. The Series 61/41/61 is uniquely designed with all the inherent TBV ball valve features, such as: 90 operation, tamperproof welded construction, internal entry stem and oval safety handle. The large straight-through port area permits easy rod out capability. Only the handle needs to be removed when installing on 2 1/8" center-to-center application. 8
11 SERIES 61/41/61 APPLICATIONS Root Valve Gauge Valve Isolation Valve Orifice Valve Dimensional drawing shown: 1/2 MNPT x 1/2 MNPT valve. Consult factory for other configurations in. (61.5 mm) Ø 1.56 in. (39.6 mm) 1.41 in. (35.8 mm) Ø 0.41 in. (10.4 mm) 3.97 in. (100.8 mm) 7.93 in. (201.4 mm) 9
12 SERIES 6400 LOCK WASHER HANDLE STOP BELLEVILLE WASHER FOLLOWER STEM SEAL MALE SW BODY THRUST BEARING BALL STEM End Connections available: BODY SEAL FEMALE SE ENDPLATE 1/2", 3/4" and 1" (15, 20 and 25 DN) sizes in Butt weld, Socket weld, MNPT, FNPT and Flanged ASME Classes 150, 300, 600 and psi WOG rating. FIRE SAFE INSTRUMENT AND PROCESS VALVE BILL OF MATERIALS Part Description Material 1/2-1 STANDARD - OTHER SIZES AVAILABLE UPON REQUEST. The TBV Series 6400 forged body, carbon or stainless steel process and gauge ball* valve replaces leaky gate valves with advanced TBV ball valve features in a fire safe design meeting stringent refinery and chemical plant requirements. The 6400 features: high-strength forged body, welded tamper-proof construction, internal entry blow out proof stem and an oval safety handle and integral lockout device to prevent accidental operation. The unique fire safe design of this product incorporates back-up metal fire lips to provide sealing should the soft seats sublimate in the event of a fire and optional grafoil stem seal to insure fire safe integrity. This fire safe design meets the stringent requirements of API 607 4th Edition. The 6400 is available with options such as lock-out devices and spring return handles. * Consult factory for other materials of construction. Body Endplate See How to Order Ball (page 20) Stem Follower Seat Stem Seal (3 pc.) Body Seal Stop Stem Nut Handle (Red) Thrust Bearing Lock Washer Belleville Washer Stop Pin 25% Glass Filled PTFE 400 SS 17-7 SS Grafloc 10
13 SERIES 6400 MAJOR DIMENSIONS - IMPERIAL Dim. 1/2" 3/4" 1" A B C D D E F G G H H Port Above dimensions are in inches. MAJOR DIMENSIONS - METRIC DN A B C D D E F G G H H Port Above dimensions are in millimeters. Note: The extension for female socket weld end connections are provided in order to avoid overheating the seats and body seals when welding. APPLICATIONS Flow: DP Transmitters Pressure Transmitters Head Level Transmitters Drain valves and blowdown service Sample point applications E F PORT C B = SE, SW A = IREB 1 E D = SE, SW 2 D = IREB F 1 H = SE 2 H = SW 1 G = SE 2 G = SW PORT STEAM MANIFOLD APPLICATION NOTES: Eliminates redundant welds associated with gate valves Series 6400 uses full penetration weld to eliminate the need for gussets Saves installation time and labor 11
14 SERIES 6500 LOCK WASHER HANDLE LOCK STOP BELLEVILLE WASHER FOLLOWER STEM SEAL I-FLANGE BODY THRUST BEARING BALL STEM ENDPLATE BODY SEAL End Connections available: 1/2", 3/4" and 1" (15, 20 and 25 DN) sizes in Butt weld, Socket weld, MNPT, FNPT and Flanged ASME Classes 150, 300, 600 and psi WOG rating. BILL OF MATERIALS Part Description Material Body See Endplate How to Order Ball (page 20) Stem Follower Seat Stem Seal Body Seal Lock Stop Handle Thrust Bearing 25% Glass Filled PTFE Belleville Washer 17-7 SS Stem Nut Lock Washer 400 SS FIRE SAFE INSTRUMENT AND TRANSMITTER ROOT VALVE 3/4 x 1 or 1/2 AVAILABLE. The Series 6500 cast body transmitter valve replaces leaky gate valves with advanced TBV ball valve features in a fire safe design meeting stringent refinery and chemical plant requirements. The 6500 features welded tamper-proof construction, internal entry blow-out proof stem and oval safety handle with lockout device to prevent accidental operation. The unique design on the 6500 incorporates back-up metal fire lips to provide sealing should the soft seats sublimate in the event of fire and optional grafoil stem seal ensuring fire safe protection. This fire safe design meets the stringent requirements of API 607 4th Edition. TBV s 6500 offers reliability, safety, visibility, unique mounting capability, quality and unsurpassed leakage protection. 12
15 SERIES 6500 APPLICATION INFORMATION Applications: Direct connection for transmitter to root/isolation valve. Floe D/P Transmitters Pressure transmitters Differential Pressure Transmitter Orifice Gauge Pressure Head Lever D/P Flowtube Absolute Pressure Differential Pressure Venturi Draft Pressure Wedge Annubars Dimensional drawing shown: 1" BW80 x 3/4" I-Flange. Consult factory for other dimensional configurations in. (58.4 mm) 3.68 in. (93.5 mm) Ø 2.50 in. (63.5 mm) 2.34 in. (59.4 mm) 37.5 Ø 1.32 in. (33.5 mm) Ø 0.96 in. (24.3 mm) in. (41.2 mm) in. (20.6 mm) Ø 1.08 in. (27.4 mm) 3.97 in. (100.8 mm) 6.94 in. (176.3 mm) 13
16 SERIES 6800 LOCK WASHER HANDLE LOCK STOP BELLEVILLE WASHER FOLLOWER STEM SEAL THRUST BEARING STEM BODY End Connections available: ENDPLATE BODY SEAL 1/2" or 3/4" (15 or 20 DN) sizes in Butt weld, Socket Weld, MNPT, FNPT and Flanged ASME Classes 150, 300, 600 and psi WOG rating. BALL BILL OF MATERIALS Part Description Material Body See Endplate How to Order Ball (page 20) Stem Follower Seat Stem Seal Body Seal Lock Stop Handle Thrust Bearing 25% Glass Filled PTFE Belleville Washer 17-7 SS Stem Nut Lock Washer 400 SS FIRE SAFE INSTRUMENT AND PROCESS VALVE 3/4" Body with 1/2, 3/4 or 1 End Connections Available. The Series 6800 valve is an instrument valve with a cast carbon or stainless steel body* that incorporates an integral lockout pad and a high performance stem packing. The valve comes equipped with a locking oval handle as a standard feature. It is seal welded to prevent tampering or accidental unthreading when removing from the line. The Series 6800 is fire safe when ordered with appropriate seals and is fully roddable. Because of the cast lockout pad, it can not be turned on 2 1/8" centers. * Consult factory for other materials of construction. 14
17 SERIES 6800 APPLICATIONS Root Valve Gauge Valve Isolation Valve Drain Valve Dimensional drawing shown: 1/2" FNPT x 3/4" MSW valve. Consult factory for other configurations in. (93.5 mm) Ø 1.05 in. (26.7 mm) 2.30 in. (58.4 mm) 2.43 in. (61.7 mm) 1.97 in. (50.0 mm) 4.75 in. (120.7 mm) 15
18 SERIES 6900 LOCK WASHER HANDLE LOCK STOP BELLEVILLE WASHER FOLLOWER STEM SEAL INSTRUMENT BODY BALL BODY SEAL ENDPLATE THRUST BEARING STEM End Connections available: 1/2", 3/4" or 1" sizes in Butt weld, Socket weld, MNPT, FNPT or Flanged ASME Classes 150, 300, 600 and psi WOG rating. PROCESS Drawing Shown: 1/2 NPTM Process x 1/2 NPTF Gauge. BILL OF MATERIALS Part Description Material Body See Endplate How to Order Ball (page 20) Stem Follower Seat Stem Seal Body Seal Lock Stop Handle Thrust Bearing 25% Glass Filled PTFE Belleville Washer 17-7 SS Stem Nut Lock Washer 400 SS INSTRUMENT GAUGE VALVE WITH MULTIPLE GAUGE PORTS 3/4" AVAILABLE. An instrument valve similar to the Series 6100 valve, the Series 6900 valve uses a cast body that incorporates an integral lockout pad and a high performance stem packing. Like the 6100, the Series 6900 is intended as a gauge isolation valve, with tapped NPT side ports for flush and drain functions. It incorporates all of the other features of the 6100 valve: roddability, fire safety and seal welding. The valve comes equipped with a locking oval handle as a standard feature. Because of the cast lockout pad, it cannot be turned on 2 1/8" centers. 16
19 SERIES 6900 APPLICATIONS Root Valve Isolation Valve Transmitter Gauge Block and Bleed Valve -20 F to -500 F (-29 C to -296 C) Photo: Transmitter Gauge Block and Bleed Valve. Dimensional drawing shown: 1/2" FNPT x 1/2" MNPT valve. Consult factory for other configurations in. (27.7 mm) 2.40 in. (60.9 mm) 1.75 in. (44.5 mm) Ø 0.41 in. (10.4 mm) 3.97 in. (100.8 mm) 1.68 in. (42.7 mm) 7.61 in. (193.3 mm) 17
20 ENGINEERING INFORMATION DESIGN SPECIFICATIONS AVAILABLE ASME B16.5 ASME B16.10 ASME B ASME B16.34 ASME B31.1 ASME B31.3 Chlorine Institute Pamphlet 6 NACE MR Federal Spec. WW-V-35, MSS-SP72 Exxon EXES A MSS-SP-99 API 607 4th Edition Pipe flanges and flanged fittings Face-to-face dimensions of ferrous valves Soft seats bubble tight; metal seats Class IV or V Steel valves (performance & design) Power piping (application) Process piping (application) Piping system, dry chlorine Sour Gas Service Application Ball valves Fire safety Instrument valves Fire test for soft seated valve Valve Size in. Pressure ASME CLASS 1/ / / / / Valve Size ND Pressure NP 8 6/10 16/25 40/ /10 16/25 40/ /10 16/25 40/ /10 16/25 40/ /10 16/25 40/ /10 16/25 40/ /10 16/25 40/64 FUGITIVE EMISSIONS CONTAINMENT OPTIONS FE BONNET WITH PRESSURE PACKING FEV BONNET WITH VACUUM PACKING FE BONNET WITH LANTERN RING AND LEAK-OFF FE - A general code denoting a fugitive emissions bonnet containing multiple V-ring packing which can be furnished with virtually any TBV valve depending on other designations within the particular valve code. FEV - Another fugitive emission prefix for use with vacuum service exclusively. Consult factory for vacuum service specifications and requirements. LR - A suffix code denoting a lantern ring in the fugitive emissions bonnet to allow for a sniffer or leak off port between 2 sets of V-ring packing. FEATURES Variety of seating materials Live loaded stem Blow out proof stem Heavy duty handle Fully traceable materials Metal and graphite seats Large port area Oval safety handle Easy to identify if valve is open or closed Welded design Variety of end connections Positive mechanical stop Available in all alloys Optional locking handle Fugitive emissions optional Carbon steel body and end plate are black oxide coated BENEFITS Wide range of process media and service conditions. Pressure and temperature recovery, stem seal integrity with a low operating torque. Operator safety. Ease of operation, long life. Certification of all pressure retaining parts available for stringent specification requirements. Available for abrasive services and temperatures to 1000 F. Consult factory for recommendation. Provides capability to be easily rod out without damage to ball or seats. Prevents accidental operation with maintaining easy visual indication of open / closed position. In open position, handle is in line with piping; in closed position, handle is cross line with piping. Tamper-proof. Threaded, butt weld, socket weld or flanged ends. Safe operation. Wide range of service conditions. Additional protection against accidental operation. Eliminate release of toxic chemicals. Resist Corrosion. 18
21 ENGINEERING INFORMATION NOTES FOR TORQUE INFORMATION All torque values are based on maximum rated pressure, clean service, and frequent operation (more than once per month). All values represent torque required to both break the valve open and re-close the valve. For spring return actuators, this means that the end of spring torque must exceed the above values by the appropriate safety margin. The recommended safety margin for sizing purposes is a minimum of 25%. For full port valves, use torque values for next size larger valve. C V values are based on the flow of water at 60 F and 14.7 psig through the valve in US gallons per minute at a pressure drop of 1 psi. INSTRUMENT VALVE CAPABILITIES/APPLICATIONS / /41/ Root Gauge Isolation Drain Orifice Fire Safe Welded Rod out capability Turn on 2 1/8 inch centers Weld-in on 2 1/8 inch (54 mm) Centers. C AND MAXIMUM TORQUE (IN-LBS.) DATA V Size in. Cv Seat T Seat G Seat C Seat U Seat P Seat D Seat K Seat M 1/ / MATERIAL IDENTIFICATION CODE T - Virgin PTFE white G - Reinforced PTFE white with red speckles C - Cryofil white U - Ultrafil black P - U.H.M.W.P. translucent white D - Delrin dark brown K - CTFE translucent M - Metal silver In addition to the options and features shown, TBV specializes in designing and manufacturing ball valves for a wide variety of special applications. TBV is known for its ability to solve difficult applications with severe service valves that perform where others have failed. Extended bonnets are available to meet stringent fugitive emission requirements. Our patented bellows sealed ball valve assures zero leakage, when absolutely no external leakage is tolerable. A wide variety of special materials are also available for severe or exotic services. Special material testing, such as corrosion evaluation, is available. Complete material certification packages can be provided to meet extensive specification requirements. A wide variety of other product configurations and sizes, up to 10 line size, are available on application. Consult TBV s extensive library of designs that have proven to give outstanding performance in the most severe services. PRESSURE (psig) RATING CHART CTFE DELRIN AF U.H.M.W. POLYETHTLENE ULTRAFIL TEMPERATURE ( F) THERMAFIL GLASS FILLED TEFLON VIRGIN TEFLON Cryofil seats rated at 1500 psi from -452 F to 150 F. Extended pressures and temperatures may be achieved by altering design for specific applications. Consult factory with service conditions. The valve rating is the lesser of the body rating and the seat rating. TBV manufactures an extensive line of high pressure valves capable of the full seat ratings shown. Consult factory for details. 19
22 HOW TO ORDER VALVE SPECIFICATION CHART END BODY/END SIZE PORTING SERIES BALL/STEM SEAL BOLTING MODIFIERS CONNECTIONS MATERIAL* MATERIAL MATERIAL MATERIAL 01 = 1/8 02 = 1/4 03 = 3/8 05 = 1/2 07 = 3/4 10 = 1 12 = 1 1/4 17 = 1 x 3/4 20 = 2 21 = 2 x 1 51 = 1/2 x 1 52 = 1/2 x 1/4 57 = 1/2 x 3/4 71 = 3/4 x 1 75 = 3/4 x 1/2 1A = 1 x 1/2 2A = 1/4 x 1/2 S = Standard Port F = Full Port 41 = 4100-Welded 43 = 4300-Welded w/ds Relief on Ball 46 = 41/61-Male End 4100 Unibody 61 = 6100-Orifice Tap Gauge 64 = 6400-Series Instrument 65 = 6500-Transmitter Root Valve 66 = 61/41/61-Double Male End All Welded 68 = 6800 Series- Instrument 69 = Instrument Gauge 0 = IRB 1 = MSE (Male Screwed End) 2 = MSW (Male Socket Weld) 3 = FSE (Female Screwed End) 4 = FSW (Male Socket Weld) 5 = I-Flange 6 = BW80 7 = BW40 8 = BW160 9 = I-Flange Neutral EXAMPLE: 1 x 3 = MSE x FSE A2 = Alloy 20 CS = Carbon Steel HC = Hastelloy C M4 = Monel 400 M5 = Monel K500 T2 = Titanium Gr 2 T5 = Titanium Gr 5 T7 = Titanium Gr 7 ZR = Zirconium 34 = 304 SS 36 = 316 SS 37 = 317 SS 4L = 304L SS 6L = 316L SS G = 15% GF PTFE H = Graphite T = Virgin PTFE C = Cryofil D = Delrin AF F = Thermafil G = 15% GF PTFE H = Grafoil/Graphite K = CTFE M = Metal P = UHMWP T = Virgin PTFE U = Ultrafil 25 (CERTAIN COMBINATIONS NOT AVAILABLE) W = All Welded CL = Chlorine Cleaning EC = Corrosion Evaluation EE = Extended End FE = Fugitive Emissions FL = Fire Lip FS = Fire Safe GO = Gear Operator GS = Grounding Spring IC = Isocyanate Cleaning LH = Locking Handle LO = Locking Oval Handle LS = Locking SS Oval Handle LV = Lever Handle OH = Oval Handle OS = Stainless Steel Oval Handle OX = Oxygen Cleaned PC = Phosgene Cleaning VB = Vented Ball VS = Vacuum Service * If ball and stem are different materials, expand code to show ball first, stem second. For additional ordering information, see the TBV General Catalog, Corrosion Resistant and Cryogenic Valves. TYPICAL VALVE MODEL NUMBERS/DESCRIPTIONS S 41 FSE M4M4 TT WCLVB 3/ welded valve w/ FSE ends, Monel 400 body, ball and stem, PTFE seats and seals, cleaned for chlorine service, w/vented ball. 41/61-07S 46 1X3 CS36 UT W 3/4" 41/61 welded valve w/ MSE by FSE ends, carbon steel body, 316 stainless ball and stem, ultrafil seats, PTFE seals S 61 2X3 A2A2 UT W 3/4" x 1/ welded gauge valve w/ MSW by FSE ends, Alloy 20 body, ball and stem, ultrafil seats, PTFE seals. 61/41/61-05S 66 MSE 6L6L UT W 1/2" 61/41/61 welded single port gauge valve w/ MSE ends, 316L body, ball and stem, ultrafil seats, PTFE seals S 64 2X3 CS36 UH WFS 3/4" 6400 welded drain valve w/ MSW x FSE ends, carbon steel body, 316 stainless ball and stem, ultrafil seats, graphoil seals, fire safe design S 65 5X5 CSM4 TT W 3/4" 6500 welded instrumentation valve w/ I-Flange ends, carbon steel body, Monel ball and stem, PTFE seats and seals S 68 2X3 CS36 UH WFS 3/4" 6800 welded drain valve w/ MSW x FSE ends, carbon steel body, 316 stainless ball and stem, ultrafil seats, graphoil seals, fire-safe design S 69 1X3 6L36 UT WFLOS 3/4" x 1/ welded gauge valve w/ MSE by FSE ends, 316L stainless body, 316 stainless ball and stem, ultrafil seats, PTFE seals w/ fire lip and stainless steel oval handle. CERTIFICATIONS 20
23 TRADEMARK INFORMATION TM TBV is a registered trademark which is owned by Cameron. This document contains references to registered trademarks or product designations, which are not owned by Cameron. Trademark DELRIN HASTELLOY MONEL Owner E.I. DuPont De Nemours & Company Haynes International, Inc. INCO Alloys International, Inc. 21
24 VALVES & MEASUREMENT 3250 Briarpark Drive, Suite 300 Houston, Texas USA Toll Free For the most current contact and location information go to: Printed in Canada 01/09-ION-3M Rev. 1 01/09
TBV Instrumentation Valves
TBV Instrumentation Valves A TBV Instrumentation Valves Cameron s TBV instrumentation valves were developed in response to concerns expressed by plant engineers. Common problems such as irregular center-to-center
More informationD I S T R I B U T E D V A L V E S. TBV Series 21/51 Cryogenic Diverter Ball Valve TBV
TM TBV Series 21/51 Cryogenic Diverter Ball Valve TBV Series 21/51 Cryogenic Diverter Ball Valve incorporates all features found in the 2100 and provides diverting capabilities for use where two or more
More informationTBV Series Diverter and three-way ball valve
TBV Series 5100 Diverter and three-way ball valve TBV Series 5100 Ball Valve The Cameron portfolio of TBV* valves includes the series 5100 diverter and three-way ball valve, which enables accomplishing
More informationTBV Series Three-piece wafer valves
TBV Series 3100 Three-piece wafer valves Content TBV Series 3100 Three-Piece Wafer Valves Introduction................................................................................3 Features.....................................................................................4
More informationTBV Series 2000 Flanged Ball Valve
TBV Series 2000 Flanged Ball Valve TBV Series 2000 Flanged Ball Valve Cameron s TBV Series 2000 flanged ball valve is a unique standard port flanged ball valve, offering almost unlimited versatility with
More informationTBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal
TBV Valve Instrument Connection Systems Quality measurement technology, proven close-coupled mounting practices, and integrated hardware for optimal transmitter performance Content TBV Valve Instrument
More informationTBV Valves. Unique range of products for gas processing and the downstream chemical market
TBV Valves Unique range of products for gas processing and the downstream chemical market Content TBV Valves Introduction................................................................................3
More information3000F Series. Full Port 2-Way 3-pc Body
Up to 4 psi WOG (275 bar) 3F Series 3F-xxx Series Valve Features Up to 4 psi service Special barstock body material options including Alloy 2, Duplex, Hastelloy C, Monel, Titanium, 254 SMO, Bronze and
More information3000R Series. Reduced Port 2-Way 3-pc Body
Up to 4 psi WOG (276 bar) 3R Series 3R-xxx Series Valve Quick Spec Product Scope Size Range 1/2", Body Type 3-pc, non Swing-out design End Connections Flanged, NPT, Weld, Custom Pressure Rating up to 4
More information3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated
M50 and H70 ANDERSON GREENWOOD 3/8-inch [9.5 mm] (optional 5/8-inch [16 mm]) bore, 6000 psig [414 barg], API Firesafe 607 rated Features and Benefits Cost savings are realized as the root valves are in-line
More informationAnderson Greenwood M1/M110 Differential Pressure Manifolds
A 3-valve differential pressure manifold with integral metal seats or replaceable, roddable soft seats for applications requiring remote mounting from the instrument Features General application The M1
More informationANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS
ANDERSON GREENWOOD M4AP/M4TP STATIC PRESSURE MANIFOLDS Block and bleed, two valve manifolds with indirect and direct mount capabilities for static pressures to 6000 psig (414 barg) FEATURES GENERAL APPLICATION
More informationANDERSON GREENWOOD LARGE BORE INTELLIMOUNT SYSTEM
Large bore direct mount 2, 3 or 5 valve manifold system with renewable block valve metal or soft seats and graphite or PTFE stem packings that reduces potential leakpoints FEATURES Close coupled straight
More informationManifold and Isolation Valve Mounting System for Direct Mounting DP Transmitters
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS for Direct Mounting DP Transmitters Introduction The Anderson Greenwood SaddleMount has been developed to overcome the problems associated with traditional transmitter/manifold
More informationStatic Pressure Manifolds M4AP and M4TP Manifolds
Static Pressure Manifolds M4AP and M4TP Manifolds Product Overview The M4AP and M4TP are block and bleed, static pressure manifolds. They are designed for use with DP-style pressure transmitters. The manifold
More informationANDERSON GREENWOOD SERIES M9 BLOCK AND BLEED GAUGE VALVES
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation FEATURES GENERAL APPLICATION
More informationBall Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼
Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FeaTUreS 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More informationPRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION
PRODUCT NEWS CAT.NO.-70 CERTIFIED TO ISO 9001 KPC CORPORATION FLOW CONTROL DIVISION Internal or External Trunnion Design KPC Construction Features BODY GASKET The tongue - and - groove body gasket maximizes
More informationTECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port
TECHNICAL BULLETIN Top Entry Cryogenic Ball Valve Standard & Full Port ROCKER PACKING GLAND 36 stainless steel, rocker shaped packing gland compensates for uneven adjustment of gland bolts. ISO 5 MOUNTING
More informationMars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
More informationTriad Series. 3 Piece Ball Valves Full Port: 1 /4-4 Standard Port: 3 /4-2 1 /2. Model FP - Full Port Model SP - Standard
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. 3 Piece Ball Valves Full Port: 1 / - Standard Port: 3 / - 1 / Triad Series Model FP - Full Port Model SP - Standard Port Flow-Tek
More informationW SERIES 3-PIECE BALL VALVES
W SERIES 3-PIECE BALL VALVES In-Line repairable metal seated ball valves for industrial and process applications. Design Pressure Rating 3000 WOG Available In Sizes ¼ to 3/4 2250 WOG Available In Sizes
More informationSize: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3E & BT3G-International Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API
More informationAnderson Greenwood M4TL Liquid Level Manifolds
A single-flanged, two-valve manifold consisting of two block valves with no equalizer passage suitable for pressures up to 6000 psig (414 barg) Features General application The manifold is designed for
More informationFORGED HIGH PRESSURE BONNETLESS. ASME CLASSES: Sizes: 1 2 4" ( mm) U.S. Patent # Patented Easy Maintenance!
FORGED HIGH PRESSURE BONNETLESS ASME CLASSES: 1690 4500 Sizes: 1 2 4" (15 100 mm) U.S. Patent # 4356832 Patented Easy Maintenance! PROFILE Velan is one of the world's leading manufacturers of industrial
More informationGauge Valves. Block and Bleed Valves Multi-Port Valves OS&Y Valves
Gauge Valves Block and Bleed Valves Multi-Port Valves OS&Y Valves Anderson Greenwood is the industry leader in instrument valve technology and the original innovator of the 3-valve manifold. Our capabilities
More informationAnderson Greenwood Series M9 Block and Bleed Gauge Valves
A valve with an interchangeable hard or soft seat and an integral bleed plug specifically designed to facilitate safe, compact, economical gauge installation and operation Features General application
More informationMANIFOLDS VALVE. Mfg & Exp. : Valves & Fittings. A Trusted Name in Valves and Fittings ISO 9001:2008 COMPANY. Catalogue No.
A Trusted Name in Valves and Fittings Mfg & Exp. : Valves & Fittings MANIFOLDS VALVE ISO 9001:2008 COMPANY Pressure Ratings: 6,000 PSI/10,000 PSI NPT, ISO/BSP, Threads 2-,3- and 5-valves Instrument manifolds
More informationKerotest KM4AP & KM4TP Static Pressure Manifolds
Kerotest KM4AP & KM4TP Static Pressure Manifolds KM4AP KM4TP Product Brief The KM4AP and KM4TP are two-valve, block and bleed style manifolds. These manifolds are intended for static pressure applications
More informationBULLETIN August 2009 PERMASEAL PLUG VALVE. ISO 9001:2008 Certified QMS. SMG Valves A Unit of Southern Manufacturing Group, Inc.
BULLETIN 13.01-01 August 2009 PERMASEAL ISO 9001:2008 Certified QMS SMG Valves A Unit of Southern Manufacturing Group, Inc. Design and Construction Permaseal Plug Valves are designed for on-off and diverting
More informationTY-FLO 3 Piece Ball Valves
OTHER PRODUCTS Other Products TYLOK International carries a comprehensive range of high-quality fluid components to compliment the TY-FLO 3 Piece Ball Valve product line. Featured below are several popular
More informationOne and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index
One and Two-Piece Carbon Steel Ball Valves Illustrated Index Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Carbon Steel Ball Valve ANSI Class 50 Unibody Design Detail Split-Body Design Detail Page
More informationMulti-Port Gauge Valves M5 and M51
Multi-Port Gauge Valves M5 and M51 M5 Product Overview The M5 and M51 are multi-port gauge valves allowing the versatile positioning of gauges or pressure switches without requiring additional penetration
More informationBall Valves & Accessories
Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with
More informationIntroduction. Application & Installation. Integral Block & Bleed Valves
Integral Block & Bleed Valves Introduction SUPERLOK's response to the demand for reduction in leakage paths has been the combination of primary and secondary valves into one compact unit. The combining
More informationGeneral Specifications
General Specifications GS 22B01C52-01EN-A M-650, M-750 and M-651 3-Valve Manifolds for Differential Pressure INTRODUCTION The PGI 3-Valve manifolds are designed for mounting on differential pressure transmitters
More informationTY-FLO 3 Piece Ball Valves
TY-FLO 3 Piece Ball Valves 3 PIECE BALL VALVES TY-FLO 3 Piece Ball Valves D 1 ASME B16.34 Compliant FEATURES 3-Piece, 8-Bolt construction provides superior high pressure performance and ASME B16.34 compliance
More information10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction
1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up
More informationAnderson Greenwood M25/M251 Block and Bleed Gauge Valves
Two-valve single outlet gauge valves that combine isolating, calibrating and venting facilities in a single compact unit Features General application These valves enable gauges, pressure transmitters or
More informationA Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide
A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4
More informationAnderson Greenwood MB Series Integral Manifolds
A range of 2, 3 or 5-valve integral manifolds for connection to bottom inlet, low-profile pressure transmitters Features MB2 General application MB3 The MB series includes 2 valve manifolds for static
More informationANDERSON GREENWOOD MC/MT SERIES INTEGRAL MANIFOLDS
A range of 2, 3 and 5 valve integral manifolds to be used with Rosemount Coplanar style transmitters for static and differential pressure applications FEATURES MC2 MT2 GENERAL APPLICATION MC3 The MC/MT
More informationD I S T R I B U T E D V A L V E S. Super G Lubricated-Non-Lubricated Plug Valve TEXSTEAM
Super G Lubricated-Non-Lubricated Plug Valve SUPER G EXCLUSIVE FEATURES Built and tested in accordance with API 6A, API 6D & B16. Lubricated and non-lubricated in same valve. Use it either way Metal-to
More informationVALVES & MEASUREMENT. TEXSTEAM Super G Plug Valves TEXSTEAM
TEXSTEAM Super G Plug Valves TEXSTEAM 2 TEXSTEAM TABLE OF CONTENTS Introduction... 4 Design Standards... 5 Parts List... 6 Accessories and Repair Kits... 7 Reduced Port Dimensions and Weights... 8 Full
More informationAnderson Greenwood M24A/M24T Differential Pressure Manifolds
Lightweight and compact 5 valve manifolds designed for direct mounting to differential pressure transmitters for pressures to 6000 psig (414 barg) Features Direct mounting compact design requires minimum
More informationBushing Viton O-ring (Other material available) Anti-Static Device
Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with
More informationVALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS LARGE BORE INTELLIMOUNT SYSTEM
VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold
More informationWKM 320F. Flanged floating ball valves
WKM 20F Flanged floating ball valves Contents WKM 20F Flanged Floating Ball Valves Features and benefits.................................................................... Exploded views and specifications....................................................5
More informationDM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES
STANDARDS DM2500/2500 Series Valve Design: ASME B16.34 Steel Casting: MSS SP-55 Face-to-face: ASME B16.10 Flange Connection: ASME B16.50 Pressure Test: API 598 (ISO 5208) TA-Luft Low Emission Valve Marking:
More informationEngineered Valves For Pipeline Service Application
Page 1 TRUNNION MOUNTED BALL VALVES TM SERIES Engineered Valves For Pipeline Service Application Valves for oil & gas pipelines and other industrial applications Flanged or Butt Weld ANSI Class 150 thru
More informationTri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port. McCANNA/MARPAC Valves RO400-R4
RO400-R4 AN ISO 9001 REGISTERED COMPANY Tri-Pac E325 / E525 Ball Valve Three-Piece Bolted Body, In-Line Maintainable, Regular and Full Port MARPAC by McCANNA Tri-Pac E325/E525 Ball Valves DESIGN FEATURES
More informationInternational Standard Valve, Inc. Trunnion Mounted Ball Valve
International Standard Valve, Inc. TM ISV Series BT3EU, BT3E & BT3G Trunnion Mounted Ball Valve Forged Construction 2 through 56 ASME Class 150-2500 Bolted or Welded Body Flanged & Weld Ends API 6D Fire
More informationTRUNNION BALL VALVES. TBV 7.10
TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in
More informationHOKE Monoflange Valves. Primary Isolation Valves
HOKE Monoflange Valves Primary Isolation Valves Table of Contents Conventional Double Block & Bleed Assembly... 3 Applications, Specifications, Features & Benefits... 4 Features Cutaway... 5 HOKE Integral
More informationDM4500 Series. Three Piece Direct Mount Ball Valves STANDARDS FEATURES & BENEFITS OPTIONS
DM4500 Series STANDARDS Valve design: ASME B16.34 Material certification: EN10204-3.1 MTR End connections: ASME B16.11, ASME B1.20.1, ASME B16.25 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve
More informationNatural Gas Manifolds M6A, M6T, M6TA 5-Valve Manifolds
Natural Gas Manifolds M6A, M6T, M6TA 5- Manifolds Features and Benefits M6A M6A Easy Installation. The lightweight M6A is easily installed in meter tubing. No additional support is generally required.
More informationStatic Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
More informationVogt Valves Catalog and Application Manual VVENCT
Vogt Valves Catalog and Application Manual VVENCT0000-06 Experience In In Motion Motion Vogt Valves, Sulphur Springs, TX Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early
More informationRHINO VALVES WORLDWIDE
RHINO VALVES WORLDWIDE Series 44 ISO Design of three pieces with plate disposition ISO 5211 for their automation. The drilled superior portion of the body (ISO5211) allows an easy installation of automation
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationneedle valves Needle Valves
Needle Valves Index At a Glance 1 1700 Series 5 Forged Body, Integral Bonnet Needle Valves 2100 Series 8 Bar Stock, Screwed Bonnet Needle Valves 2200 Series 12 Bar Stock, Screwed Bonnet Needle Valves 2219
More informationBall and Stem Materials: 316 Stainless Steel Alloy 20 Monel Hastelloy C. Service Applications: Hydraulics Chemical
13560 Larwin Circle, Santa Fe Springs, CA 90670 Phone: (562) 802-2255 (800) 783-7836 Fax: (562) 802-3114 Netsite: www.svf.net E-mail: Sales@SVF.net R8 SERIES ANTI-STATIC API-607-4th EDITION 1/4 6 PROCESS
More informationF-17 CATALOG. Forged Steel Valves
F-17 CATALOG Forged Steel Valves Vogt Valves A History in the Making In the late 1890s, Vogt pioneered the early development of ammonia absorption refrigeration systems that made artificial ice. This business,
More informationTABLE OF CONTENTS. 2
TABLE OF CONTENTS HIGH PERFORMANCE BALL VALVES...PAGE 3 FIRE SAFE BALL VALVES...PAGE 6 SEAL WELD BALL VALVES...PAGE 9 MULTI PURPOSE BALL VALVES...PAGE 12 BUTTERFLY BALL VALVES...PAGE 17 MULTI-TURN VALVES...PAGE
More informationPBV s Engineering Excellence At Work
PBV s Engineering Excellence At Work The PBV Series 5700/6700 Three-Piece, Side-Entry, Trunnion Ball Valve 2"- 56" ANSI Class 150/300,600,900,1500 & 2500 In Full And Standard Port PBV trunnion ball valves
More informationRHINO VALVES WORLDWIDE. Series 44 ISO. Design of three pieces with plate disposition ISO 5211 for their automation.
RHINO VALVES WORLDWIDE Series 44 ISO Design of three pieces with plate disposition ISO 5211 for their automation. The drilled superior portion of the body (ISO5211) allows an easy installation of automation
More informationP3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD
P3M5S, P4M5S, P6M5S 5-VALVE MANIFOLD GAS STYLE MANIFOLD 5-Valve Gas Style Manifold The 5-valve manifold features 2 isolation valves, 2 equalizer valves and 1 vent valve in a single body for isolation and
More informationBall Valves. Quality Valves at Low Cost
Ball Valves Quality Valves at Low Cost Table of Contents B Series, 2, 3 PC Ball Valves Part Numbering System...3 B0: 2 PC, 000 WOG, 36SS... 4 B02: 2 PC, 2000/0 WOG, 36SS... 4 B03: 2 PC, 000 WOG, 36SS Direct
More informationDelivering Peak Performance. High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments
Delivering Peak Performance High-pressure liquid and gas flow control solutions for the oil and gas industry s harshest environments A leading brand of high pressure valves, tubing, fittings and accessories,
More informationSeries. Stainless Steel Ball Valve 1/4-1
76-100 Series Stainless Steel Ball Valve 1/4-1 Threaded, 2000 psig WOG. (See referenced P/T chart) Cold Non-Shock. 150 psig Saturated Steam, Vacuum Service to 29 inches Hg. Federal Specification: WW-V-35C,
More informationCV3000 Series. Control Ball Valve 4000 psi WOG (276 bar) Fully Customizable Flow Control Inserts Carbon, Stainless, Alloy Bar Stock Construction
4 psi WOG (276 bar) CV3 Series CV3F-xxx Series Full Port Valve CV3R-xxx Series Reduced Port Valve Features Uni-directional control valve Zero leakage shutoff, soft seated Upstream Cv plate control element
More informationAnderson Greenwood PTM/PT7 Static Pressure Manifolds
m o Anderson Greenwood PTM/PT7 Static Pressure Manifolds Two valve calibration manifolds with a choice of metal and soft seats for static pressures up to 6000 psig (414 barg) PT7 PTM Features Cost savings
More informationCondensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963
800.231.6969 Condensed Valve Guide Gate Globe Check Ball Strainer Warren Valve - Quality Since 1963 Gate, Globe & Check Valves #1156 #2156 #3156 Gate Globe Check Pressures Class Figure 150 - #1156 300
More informationANDERSON GREENWOOD H7/H71 HAND VALVES
3 /16 (4.8 mm) orifice hard-seated hand valves for pressures to 6000 and 10000 psig (414 and 689 barg) FEATURES H7 GENERAL APPLICATION H7 series valves are designed for safe, repetitive bubble-tight closure,
More informationFORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES
FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES FORGED BRASS BALL VALVES 2-pc Full Port Forged Brass Ball Valve, Packing Gland Design, 600 WOG/150 WSP, MSS-SP-110 CSA, UL, FM, NSF61 and LP Gass Approved
More informationINTRODUCTION AND STANDARD SPECIFICATIONS
INTRODUCTION AND STANDARD SPECIFICATIONS INTRODUCTION Instrument valves and manifolds are often used on general applications for liquid and gas service and are suitable for shutting-off impulse lines to
More informationStatic Pressure Manifolds PTM and PT7 2-Valve Manifolds
Static Pressure Manifolds PTM and PT7 2-Valve Manifolds PT7 PTM Product Overview The PT Two-Valve Calibration Manifolds are used on static pressure transmitters, switches or gauges. The shutoff valve,
More informationSeries 44 Ball Valves 3-piece ball valves designed to meet all requirements of ANSI B Worcester Controls PB
PB 401-32 An ISO 9001 Registered Company Series 44 Ball Valves 3-piece ball valves designed to meet all requirements of ANSI B16.34 THE NEW SERIES 44: A quantum advance in ball valve durability, cycle
More informationFLANGED SERIES 1 PIECE FLANGED STANDARD PORT RF15 - ASME Class 150 RF30 - ASME Class 300 FLANGED SERIES RF15/RF30
FLANGED SERIES 1 PIECE FLANGED STANDARD PORT 1-12 RF15 - ASME Class 150 RF30 - ASME Class 300 1 R F 1 5 / R F 3 0 F L A N G E D S E R I E S B A L L VA LV E S Flow-Tek s Series RF15 and RF30 Ball Valves
More informationFeatures of Aegis HPCV Series Ball Valves
Features of Aegis HPCV Series Ball Valves Aegis HPCV Series high integrity ball valves feature the most advanced technology available for isolating and controlling industries most hazardous process liquids
More informationSVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D
Series 41 150# Flanged Standard Port Fire Safe / API-607 4 th Edition 1 PIECE REDUCED PORT BALL VALVE UNITS = INCHES SIZE CLASS 150 WEIGHTS L H W 1 1/2 11 6.50 3.86 9.06 2 21 7.01 4.65 9.06 3 40 7.99 5.98
More information3-Piece High Pressure Ball Valves
3-Piece High Pressure Ball Valves Contromatics 3-Piece High Pressure Ball Valves Series 735/ 835 3/4"- 21/2" Reduced Port, 45 WOG* 735-Carbon Steel Body, Stainless Steel Trim 835-All Stainless Steel Construction
More informationForged 3 Piece Trunnion Mounted Ball Valves Series PL
Forged 3 Piece Trunnion Mounted Ball Valves Series PL Construction: 3 piece bolted side entry Trunnion housings 4 Trunnion retainer plates 6 Standard single piece seating SPE & DPE Special scraping 3 piece
More informationWEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
More informationF20 Series Ball Valve Index
F0 Series Ball Valve Index Features & Benefits F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " F0CS/F0SS Class 50/00 " - " State of California Prop 5 WARNING: Cancer and Reproductive Harm. For
More informationBlock & Bleed Valve.
Block & Bleed Valve www.nacoroke.com BLOCK & BLEED VALVES CONTENTS Introduction Application installaltions Specification Ball valve type OS&Y Needle type Glove Needle Valve type Block & Bleed valve Monoflange
More informationBS EN ISO 9001 FM Worcester Controls E51/52 Enviro-Safe High Integrity Flanged Ball Valves
BS EN ISO 9001 0086 as FM 00707 Enviro-Safe High Integrity Flanged Ball Valves GENERAL DESCRIPTION With environmental control already established as a major issue for the future, has launched a range of
More informationSeries 51/52 Flanged Ball Valves Standard and Anti-Static Valves in ANSI Class 150 and 300. Worcester Controls. FCD WCABR (Part PB 51)
FCD WCABR03-0 (Part PB 5) AN ISO 900 REGISTERED COMPANY Series 5/52 Flanged Ball Valves Standard and Anti-Static Valves in ANSI Class 50 and 300 Series 5/52 Flanged Ball Valves Designed to Automate, Control,
More informationPBV. Threaded and Socketweld Ball Valves P.B.V.
PBV Threaded and Socketweld Ball Valves P.B.V. TABLE OF CONTENTS Overview...3 How to Identify PBV-USA Valves...4 Seat Materials...5 Materials/Parts/Dimensions/Weights Master Star - 5333/6333...6 Superstar
More informationInstrument Valves and Manifolds
Instrument Valves and Manifolds Needle Valves Instrument Valve Orifice Block Valves Gauge Block Valves Block & Bleed Valves Integral Block & Bleed Valves Two Valve Manifolds Three Valve Manifolds Five
More informationISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design
TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through
More informationANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
More informationCRYOGENIC. Italian Manufactured, Italian Quality
Italian Manufactured, Italian Quality CRYOGENIC Via Di Vittorio 307/25-20099 Sesto San Giovanni (MI) - Italy Tel: +39.028.976.1628 - Fax: +39.028.976.2167 www.sestovalves.com - sales@sestovalves.com Introduction
More informationANDERSON GREENWOOD. Hand Valves and Accessories INSTRUMENTATION PRODUCTS. Soft Seated Valves Hard Seated Valves Mini Valves
ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Hand Valves and Accessories Soft Seated Valves Hard Seated Valves Mini Valves Anderson Greenwood is the industry leader in instrument valve technology and the
More informationDistributed By: M&M Control Service, Inc
The KM1 is a 3-valve manifold designed for applications where direct mounting to an instrument is impractical or undesirable. This style manifold is mounted to the lines from the instrument and signal
More informationBS 5351 ASME CLASS: SIZES: mm ( 1 /2 12 )
BS 5351 ASME CLASS: 150 300 SIZES: 15 300mm ( 1 /2 12 ) PROFILE Velan is the world's leading manufacturer of steel gate, globe, check, ball, knife and butterfly valves, 8 1500 mm ( 1 4 60 ), ASME Classes
More informationBLOCK & BLEED VALVE. High Technology Valve & Fitting Series.
BLOCK & BLEED VALVE High Technology Valve & Fitting Series www.tanamachine.com Brief Introduction APPLICATION & INSTALLATION SOLUTIONS TANA instrumentation products provided the ultimate suitable solutions
More informationBushing Viton O-ring (Other material available) Anti-Static Device
API 607-6th Edition Triac unibody flanged ball valves feature a high quality investment cast body and end. They are available in 1/2 through 6 regular port. Superior leak protection is accomplished by
More information