HP SERIES HIGH PERFORMANCE CAPACITORS
|
|
- Ashley Knight
- 5 years ago
- Views:
Transcription
1 AMERICAN TECHNICAL CERAMICS HP SERIES HIGH PERFORMANCE CAPACITORS Low Cost HP Series High Performance Multilayer Ceramic Capacitors ISO 9001 REGISTERED COMPANY ATC , Rev. A; 7/11
2 ATC HP 0402 SERIES HIGH PERFORMANCE NPO CERAMIC MLCS ATC HP 0402 Series High Performance NPO Ceramic MLCs Electrical Characteristics: Capacitance Range: Temperature Coeffiecent of Capacitance: 0.2 pf to 30 1 MHz 0 ± 30 ppm/ C (-55 to +125 C) Insulation Resistance (IR) Ω 25 C and rated Ω 125 C and rated Dielectric Working Voltage (DWV): Working Voltage () 250% of rated 50 ATC offers the new HP Series high performance family of MLC ceramic capacitors. Built in a rugged ceramic SMT package, these products deliver high performance at the right price. The HP series is available in four popular EIA case sizes and is suitable for tuning, DC blocking, coupling and bypassing over the full range of wireless frequencies. All HP Series products are RoHS compliant. L W T (MAX.) MB Case Size 0402 Length (L) ±0.004 (1.00 ±) Width (W) ±0.004 (0.50 ±) T Max (0.6) Term. (MB) Max. N/A ESR (ohms) 1 TYPICAL ESR vs. FREQUENCY HP SERIES pf 15 pf 3.3 pf Frequency (GHz) TYPICAL SERIES RESONANT FREQUENCY HP SERIES Frequency (MHz) Capacitance 1
3 ATC HP 0402 SERIES HIGH PERFORMANCE NPO CERAMIC MLCS Capacitance Values: 0R R R R R R B, C 0R R R R R R R R R7 4.7 B, C, D R R9 1.9 B, C, D 50 5R F, G, J R R R K 0R R R B, C, D 1R R R R R R5 7.5 B, C, J R R R2 8.2 K R R R1 9.1 Part Number Code 0402 HP 1R 0 C T 50 T Size Code Series First 2 Signficant Digits For Capacity Packaging: T=7 Reel, 0402: 10,000 piece reel Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point Capacitance Tolerance: CAPACITANCE TOLERANCE Code B C D F G J K Tol. ± pf ±0.25 pf ±0.5 pf ±1% ±2% ±5% ±10% Terminataion Code: T = Tin plated over Nickel Barrier (Standard), RoHS Compliant The above part number refers to an ATC HP 0402 Series 1.0 pf capacitor, C tolerance (±0.25 pf), 50, with T termination (Tin Plated over Nickel Barrier), on 7 inch reel. For additional information and catalogs contact your ATC representative or call direct at (+1-631) Consult factory for additional performance data. 2
4 ATC HP 0603 SERIES HIGH PERFORMANCE NPO CERAMIC MLCS ATC HP 0603 Series High Performance NPO Ceramic MLCs Electrical Characteristics: Capacitance Range: Temperature Coeffiecent of Capacitance: 1.0 pf to MHz 0 ± 30 ppm/ C (-55 to +125 C) Insulation Resistance (IR) Ω 25 C and rated Ω 125 C and rated Dielectric Working Voltage (DWV): Working Voltage () 250% of rated 200, 100, 50 ATC offers the new HP Series high performance family of MLC ceramic capacitors. Built in a rugged ceramic SMT package, these products deliver high performance at the right price. The HP series is available in four popular EIA case sizes and is suitable for tuning, DC blocking, coupling and bypassing over the full range of wireless frequencies. All HP Series products are RoHS compliant. L W T (MAX.) MB Case Size 0603 Length (L) ±0.010 (1.52 ±0.25) Width (W) ±0.010 (0.76 ±0.25) T Max (0.91) Term. (MB) Max ±0.005 (0.25 ±3) 1 TYPICAL ESR vs. FREQUENCY HP SERIES TYPICAL SERIES RESONANT FREQUENCY HP SERIES 0603 ESR (Ohms) 1.2 pf 2.2 pf 10 pf Frequency (GHz) MHz Capacitance 3
5 ATC HP 0603 SERIES HIGH PERFORMANCE NPO CERAMIC MLCS Capacitance Values: 1R R R1 9.1 B, C, J, K R R R R R R R R R R9 3.9 B, C, D R R B, C, D R R F, G, J, K R R R R R R R R R R5 7.5 B, C, J, K R R2 8.2 F, G, J, K Part Number Code 0603 HP 10 0 J T 200 T Size Code Series First 2 Signficant Digits For Capacity Packaging: T=7 Reel, 0603: 4,000 piece reel Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point Capacitance Tolerance: CAPACITANCE TOLERANCE Code B C D F G J K Tol. ± pf ±0.25 pf ±0.5 pf ±1% ±2% ±5% ±10% Terminataion Code: T = Tin plated over Nickel Barrier (Standard), RoHS Compliant The above part number refers to an ATC HP 0603 Series 10 pf capacitor, J tolerance (±5%), 200, with T termination (Tin Plated over Nickel Barrier), on 7 inch reel. For additional information and catalogs contact your ATC representative or call direct at (+1-631) Consult factory for additional performance data. 4
6 ATC HP 0805 SERIES HIGH PERFORMANCE NPO CERAMIC MLCS ATC HP 0805 Series High Performance NPO Ceramic MLCs Electrical Characteristics: Capacitance Range: Temperature Coeffiecent of Capacitance: 1.0 pf to MHz 0 ± 30 ppm/ C (-55 to +125 C) Insulation Resistance (IR) Ω 25 C and rated Ω 125 C and rated Dielectric Working Voltage (DWV): Working Voltage () 250% of rated 200 ATC offers the new HP Series high performance family of MLC ceramic capacitors. Built in a rugged ceramic SMT package, these products deliver high performance at the right price. The HP series is available in four popular EIA case sizes and is suitable for tuning, DC blocking, coupling and bypassing over the full range of wireless frequencies. All HP Series products are RoHS compliant. L W T (MAX.) MB Case Size 0805 Length (L) ±0.008 (2.01 ±0.2) Width (W) ±0.008 (1.25 ±0.2) T Max ±0.005 (1.02 ±27) Term. (MB) Max ±0.010 (0.51 ±0.254) 1 TYPICAL ESR vs. FREQUENCY HP SERIES TYPICAL SERIES RESONANT FREQUENCY HP SERIES 0805 ESR (Ohms) 1.2 pf 10 pf Frequency (GHz) pf MHz Capacitance 5
7 ATC HP 0805 SERIES HIGH PERFORMANCE NPO CERAMIC MLCS Capacitance Values: 1R R R R R R R R R R3 4.3 B, C, D R R R R R7 1.7 B, C, D 200 5R F, G, J, K F, G, J, K 200 1R R R R R R B, C, J, K 2R R R R R F, G, J, K R7 2.7 Part Number Code 0805 HP 10 1 J T 200 T Size Code Series First 2 Signficant Digits For Capacity Packaging: T=7 Reel, 0805: 2,000 piece reel Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point Capacitance Tolerance: CAPACITANCE TOLERANCE Code B C D F G J K Tol. ± pf ±0.25 pf ±0.5 pf ±1% ±2% ±5% ±10% Terminataion Code: T = Tin plated over Nickel Barrier (Standard), RoHS Compliant The above part number refers to an ATC HP 0805 Series 100 pf capacitor, F tolerance (±1%), 200, with T termination (Tin Plated over Nickel Barrier), on 7 inch reel. For additional information and catalogs contact your ATC representative or call direct at (+1-631) Consult factory for additional performance data. 6
8 ATC HP 1210 SERIES HIGH PERFORMANCE NPO CERAMIC MLCS ATC HP 1210 Series High Performance NPO Ceramic MLCs Electrical Characteristics: Capacitance Range: Temperature Coeffiecent of Capacitance: 1.0 pf to MHz 0 ± 30 ppm/ C (-55 to +125 C) Insulation Resistance (IR) Ω 25 C and rated Ω 125 C and rated Dielectric Working Voltage (DWV): Working Voltage () 250% of rated 200, 100 ATC offers the new HP Series high performance family of MLC ceramic capacitors. Built in a rugged ceramic SMT package, these products deliver high performance at the right price. The HP series is available in four popular EIA case sizes and is suitable for tuning, DC blocking, coupling and bypassing over the full range of wireless frequencies. All HP Series products are RoHS compliant. L W T (MAX.) MB Case Size 1210 Length (L) 26 ±0.008 (3.2 ±0.2) Width (W) ±0.008 (2.49 ±0.2) T Max ±0.005 (1.27 ±27) Term. (MB) Max ±0.015 (0.635 ±0.381) 1 TYPICAL ESR vs. FREQUENCY HP SERIES TYPICAL SERIES RESONANT FREQUENCY HP SERIES 1210 ESR (Ohms) 1.2 pf 10 pf 100 pf Frequency (GHz) MHz Capacitance 7
9 ATC HP 1210 SERIES HIGH PERFORMANCE NPO CERAMIC MLCS Capacitance Values: 1R R R R R R1 5.1 B, C, D R R R R R R R R B, C, J, K 1R R R R R9 1.9 B, C, D F, G, J, K F, G, J, K 2R R R R F, G, J, K 2R R R R R Part Number Code 1210 HP 10 1 J T 200 T Size Code Series First 2 Signficant Digits For Capacity Packaging: T=7 Reel, 1210: 2,000 piece reel Indicates number of zeros following digits of capacitance in picofarads R=Decimal Point Capacitance Tolerance: Code B C D F G J K Tol. ± pf ±0.25 pf ±0.5 pf ±1% ±2% ±5% ±10% Terminataion Code: T = Tin plated over Nickel Barrier (Standard), RoHS Compliant The above part number refers to an ATC HP 1210 Series 100 pf capacitor, F tolerance (±1%), 200, with T termination (Tin Plated over Nickel Barrier), on 7 inch reel. For additional information and catalogs contact your ATC representative or call direct at (+1-631) Consult factory for additional performance data sales@atceramics.com sales@atceramics-europe.com sales@atceramics-asia.com 8
10 Other ATC Product Catalogs Multilayer Capacitors & Power Assemblies Inductor Products High Power Resistive Products Custom Thin Film Products Single Layer Capacitors Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document # Rev. B 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice American Technical Ceramics. All Rights Reserved. ATC Rev. A; 7/11
Multilayer Ceramic Chip Capacitors
RoHS Compliant FEATURES Includes all homogeneous materials STANDARD EIA 0805 & 1206 PACKAGING *See Part Number System for Details EACH COMPONENT CONTAINS 4 ISOLATED CERAMIC CAPACITORS AVAILABLE IN A WIDE
More informationSWITCH-MODE CERAMIC CAPACITORS
Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and
More informationMultilayer Acrylic Polymer Film Capacitors
FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC
More informationGeneral Purpose Ceramic Capacitors (C Series)
Features: RoHS Compliant and Halogen Free Capacitance range: 0.1pF to 220uF range: 4V to 100V Terminations: 100% matte Tin (Sn), Palladium (Pd-Ag), Gold (Au) and Lead (Pb) Very low ESR in X7R/X5R (
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (IR Reflow Soldering) FEATURES Manufactured with non-magnetic materials Safety screened for magnetic properties C0G (NP0)
More informationAMERICAN TECHNICAL CERAMICS DESIGN KITS CAPACITORS RESISTORS INDUCTORS
AMERICAN TECHNICAL CERAMICS DESIGN KITS CAPACITORS RESISTORS INDUCTORS WWW.ATCERAMICS.COM Table of Contents Corporate Profile...1 ATC Multilayer Capacitor Design Kits...2-5 ATC Multilayer Capacitor Lab
More informationAccu-P. Thin-Film Technology THE IDEAL CAPACITOR THIN-FILM TECHNOLOGY
Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low frequencies. Physical size imparts inductance to the capacitor and dielectric and metal
More informationEUROPEAN SIZES SMPS STACKED CAPACITORS
EUROPEAN SIZES SMPS STACKED X7R AND NPO STACKED CAP DIMENSIONS 0.25 ± 0.050 (0.010 ±.002) All Measurements Millimeters (inches) 6.35 (0.250) Min. 0.25 ± 0.050 (0.010 ±.002) 2.54 (0.100) Max. 0.64 (0.025)
More informationMULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded
More informationRadial Leads/SkyCap /AR Series
Radial Leads/SkyCap /AR Series AUTOMOTIVE GENERAL INFORMATION AVX AR Series Conformally Coated Radial Leaded MLC Temperature Coefficients: C0G (NP0), X7R, X8R 3000, 2000, 1000, 200, 100, 50 Volts Case
More informationSurface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications
Surface Mount Multilayer Ceramic Chip Capacitors for High Reliability Applications ELECTRICAL SPECIFICATIONS FEATURES Manufactured with a combination of design, materials and tight process control to achieve
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding)
Surface Mount Multilayer Ceramic Chip Capacitors for Non-Magnetic Applications (Epoxy Bonding) ELECTRICAL SPECIFICATIONS NON-MAGNETIC C0G (NP0) GENERAL SPECIFICATION Note Electrical characteristics at
More informationPart Number Example (example) CDR31 BP 101 B K S M. MIL Style Voltage-temperature Limits
Part Number Example CDR31 thru CDR35 MILITARY DESIGNATION PER MIL-PRF-55681 W D L t Part Number Example (example) CDR31 BP 101 B K S M MIL Style Voltage-temperature Limits T Capacitance Rated Voltage Termination
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification
More informationSELECTION GUIDE. Order code Voltage(VDC) NTE0303XMC NTE0305XMC
1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature: -40 ~+85
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification May 31, 2016 V.14 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free Product
More informationMULTILAYER CERAMIC CHIP CAPACITORS
October 2017 Automotive Grade, General (Up to 50V) CGA series CGA1 CGA2 CGA3 CGA4 CGA5 CGA6 CGA8 CGA9 0603 [0201 inch] 1005 [0402 inch] 1608 [0603 inch] 2012 [0805 inch] 3216 [1206 inch] 3225 [1210 inch]
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, X7R
Product Specification October 27, 16 V.15 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General Purpose & High Capacitance Class 2, 6.3 V TO 50 V 100 pf to 22 µf RoHS compliant & Halogen Free
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationSELECTION GUIDE. Order code B0303NXT-1W B0305NXT-1W B0309NXT-1W
B-NXT-1W 1W, FIXED INPUT, ISOLATED SINGLE OUTPUT SMD DC-DC CONVERTER FEATURES Footprint over pins 1.37cm 2 Short Circuit Protection(automatic recovery) I/O isolation voltage 1000VDC Operating Temperature:
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationSurface-Mounted Ceramic EMI Filter Capacitors
X2Y S Surface-Mounted Ceramic EMI Filter Capacitors Feb, 2008 Rev.14 1 DESCRIPTION Yageo s X2Y series is a breakthrough in the design of ceramic multilayer products for decoupling and filtering in an IPD
More informationThin-Film RF/Microwave Capacitor Technology. Accu-P
Thin-Film RF/Microwave Capacitor Technology Accu-P 5 Accu-P Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low frequencies. Physical size imparts
More informationType AVS SMT Aluminum Electrolytic Capacitors - General Purpose, 85 C
General Purpose Filtering, Bypassing, Power Supply Decoupling Specifications Operating Temperature: Rated voltage: Capacitance: D.F. (@ 20 C): Capacitance Tolerance: Leakage Current: Ripple Current Multipliers:
More informationoutput Output Voltage min (ma)
SERIES: VBT1-SMT DESCRIPTION: DC-DC CONVERTER date 11/01/2012 page 1 of FEATURES 1 W isolated industry standard 8 pin SMT package dual unregulated s 1,000 V isolation short circuit protection UL safety
More informationAutomotive Grade Accu-P
Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low frequencies. Physical size imparts inductance to the capacitor and dielectric and metal
More informationType AHA SMT Aluminum Electrolytic Capacitors -55 C to +105 C - Long Life
Long Life Filtering, Bypassing, Power Supply Decoupling Capacitors deliver twice the life of many SMT aluminum capacitor types, and they handle high levels of ripple current. The AHA can handle the ripple
More informationMulti Layer Ceramic Capacitor
Features: : A wide selection of sizes is available (0201 to 0603 sizes) High capacitance in given case size Capacitor with lead-free termination (pure Tin) Applications: For general digital circuit For
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code. Voltage range. Reflected ripple current. Isolation test voltage
www.murata-ps.com CME Series SELECTION GUIDE FEATURES Single Isolated output 1kVDC or 3kVDC option Wide temperature performance at full 1 Watt load -40 C to 85C Industry Standard Pinout 3.3V and 5V Inputs
More informationRated Voltage (VDC) 9 = = 10 3 = 25 5 = 50 1 = = 200 A = 250 C = 500
CBR Series, C0G Dielectric, Ultra High Q, Low ESR, 6.3 500 VDC (RF & Microwave) Overview KEMET s CBR Series surface mount multilayer ceramic capacitors (MLCCs) in C0G dielectric feature a robust and exceptionally
More informationPHE426 Single metallized film pulse capacitor, polypropylene dielectric According to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS CONSTRUCTION L B Pulse operation in SMPS, TV, monitor, electrical ballast and
More informationAccording to IEC , grade 1.1
Single metallized film pulse capacitor, polypropylene dielectric According to IEC 60384-16, grade 1.1 TYPICAL APPLICATIONS Pulse operation in SMPS, TV, monitor, electrical ballast and other high frequency
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com NML Series FEATURES RoHS compliant Single isolated output 1kVDC isolation Efficiency up to 85% Wide temperature performance at full 2 watt load, 40 C to 85 C Power density 2.01W/cm 3
More informationNMH Series Isolated 2W Dual Output DC/DC Converters
www.murata-ps.com NMH Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF1 V V ma ma % pf khrs Package
More informationSOLID TANTALUM CHIP CAPACITORS T496 SERIES Fail-Safe Fused
Built-in fuse protects against damaging short circuit failure mode Precision-molded, laser-marked case Symmetrical, compliant terminations Taped and reeled per EIA 481-1 geometry and footprints equivalent
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationMEA1 Series 1kVDC Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com MEA1 Series FEATURES UL 695 recognised Typical efficiency to 89.5% 1kVDC isolation Hi Pot Test Wide temperature performance at full 1 Watt load, 4 C to 85 C Industry standard pinout Power
More informationNMA 5V, 12V & 15V Series Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com NMA 5V, 12V & 15V Series FEATURES Efficiency up to 80% Wide temperature performance at full 1 Watt load, 40 C to 85 C Dual output from a single input rail Industry standard pinout Power
More informationSurface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123
Surface Mount Multilayer Ceramic Chip Capacitors MIL Qualified, Type MIL-123 ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C, unless otherwise specified FEATURES Space-level reliability
More informationCERAMIC CHIP CAPACITORS
CERAMIC CHIP CAPACITORS INTRODUCTION Ceramic chips consist of formulated ceramic dielectric materials which have been fabricated into thin layers, interspersed with metal electrodes alternately exposed
More informationHigh Voltage PolyTerm Ceramic Capacitors
High PolyTerm Ceramic Capacitors Standard MLCCs are prone to cracking due to mishandling, depanelization, and board flexing. In response to customer requests for higher resistance to mechanical stress,
More informationMultilayer Ceramic Capacitors
Capacitors FEATURES Nickel Barrier or Silver Palladium Terminations Tolerances between ±0.25 and 20% see detailed specifications Available Taped and Reeled for Automatic Insertion TYPE SIZE DIELECTRIC
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSELECTION GUIDE. Nominal Input Order Code Voltage. Output Voltage. Reflected ripple current
www.murata-ps.com FEATURES RoHS compliant Efficiency up to 82% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 package material Reduced footprint at 0.98cm 2 Industry standard pinout
More informationNTA Series Isolated 1W Dual Output SM DC/DC Converters
www.murata-ps.com NTA Series FEATURES RoHS compliant Efficiency up to 78% Wide temperature performance at full 1 Watt load, 40 C to 85 C UL 94V-0 Package material Footprint over pins 1.64cm 2 Lead frame
More informationApplications MDS K 50 A52 P3 TUBE. Capacitance Tolerance J = ±5 K = ±10% Other tolerances on request. F 17 3 A A 333 K 050 T
MDS, Dual In-Line Low Profile, 50 630, High Current Overview Dual in-line (DIL) metallized polyester (PET) film capacitor is encapsulated in a self-extinguishing material, meeting the requirements of UL
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationCMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single or Dual Isolated Outputs 1kVDC or 3kVDC options Hi Pot Test Wide temperature performance
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationMEE1 Series Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MEE1 Series FEATURES UL69 recognised Operation to zero load Single isolated output 1kVDC isolation Hi Pot Test Efficiency up to 87% typical Wide temperature performance at full 1 watt
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationNKE Series. Isolated Sub-Miniature 1W Single Output DC/DC Converters FEATURES
www.murata-ps.com NKE Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Efficiency Isolation Capacitance MTTF 1 Package Style FEATURES RoHS
More informationEvaluates: MAX2248. MAX2248 Evaluation Kit. General Description. Features. EV Kit Photo
General Description The MAX2248 evaluation kit (EV kit) simplifies evaluation of the MAX2248 power amplifier (PA). It enables testing of the device s RF performance and requires no additional support circuitry.
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage Order Code1. Output
CRE1 Series www.murata-ps.com FEATURES UL 69 recognised3 Single Isolated output 1kVDC or 3kVDC option Hi Pot Test Wide temperature performance at full 1W load - C to 8 C4 Industry Standard Pinout 3.3V,
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Order Code 1. V V ma
www.murata-ps.com CRE1 Series SELECTION GUIDE FEATURES UL 69 recognised 3 Single Isolated output 1kVDC or 3kVDC option Hi Pot Test Wide temperature performance at full 1W load -4 C to 85 C 4 Industry Standard
More informationOur Mission. Venkel s mission is to be. a leading supplier of surface. mount components by utilizing a. team of highly motivated people
Our Mission Venkel s mission is to be a leading supplier of surface mount components by utilizing a team of highly motivated people dedicated to exceeding customer expectations through superior quality,
More informationNMA 5V, 12V & 15V Series Isolated 1W Dual Output DC/DC Converters
NMA 5V, 12V & 15V Series FEATURES RoHS compliant Effi ciency up to 80% Power density up to 0.85W/cm 3 Wide temperature performance at full 1 Watt load, 40 C to 85 C Dual output from a single input rail
More informationTemperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationNMJ Series 5.2kVDC Isolated 1W DC-DC Converters
www.murata-ps.com NMJ Series FEATURES UL60950 recognised Wide temperature performance at full 1 watt load, 40 to 85 Single and dual outputs SIP package style 5.2kVD isolation Hi Pot Test 3V, 5V & 12V input
More information74x Series Chip Resistor Arrays
Features Low Cost Thick Film Technology Leadless Surface Mount Construction Concave Convex Terminations Solder Coated Nickel Barrier Pads Isolated and Bussed Circuit Configurations Improved TCR Tracking
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating, providing
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More informationMEV3 Series 3kVDC Isolated 3W Single Output DC/DC Converters
SELECTION GUIDE FEATURES RoHS compliant Typical effi ciency from 83% Power density 1.9W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C UL 94V- package material No heatsink required
More informationCERAMIC DIELECTRIC TRIMMER CAPACITORS
Sprague-Goodman ENGINEERING BULLETIN SG-305G Supercedes SG-305F CERAMIC DIELECTRIC TRIMMER CAPACITORS Engineering Bulletin SG-305 Contents (Click on a topic to go to that section) SURFTRIM Surface Mount:
More informationSELECTION GUIDE. Nominal Input Voltage. Output Current. Output Voltage. Reflected ripple current
www.murata-ps.com SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Isolation Efficiency Capacitance MTTF1 V V ma % pf khrs Package Style FEATURES
More informationSH01S/D Series 1W DC/DC CONVERTER, SMD-Package
SH01S/D Series 1W DC/DC CONVERTER, SMD-Package FEATURES Efficiecny up to 80% SMD Package with Industry Standard Pinout Operating Temperature Range 40 C to +8 C Moisture sensitivity level (MSL) 2 Isolation
More informationGas Discharge Tubes GTCC23-XXXM-R01-2 Series
Littelfuse Circuit Protection 3mm 2Pole Chip type GDTs (ceramic gas discharge tubes), are commonly used to help protect sensitive telecom equipment such as communication lines, signal lines and data transmission
More informationMEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More information55 C to +105 C 6.3, 10, 16, 25, 35, 50, 63, 80 & 100 Vdc. Shelf Test: C. 0.3 mm Max. A
Type AFK 55 C to 5 C SMT Aluminum Electrolytic Capacitors - Lowest E.S.R., 5 C Low Impedance and Long-Life for Filtering, Bypassing and Power Supply Decoupling Specifications Life Test: Operating Temperature:
More informationCeramic disc capacitors (kinked leads) Class 2, low loss (0.2% max.) 500 V; 1 kv; 2 kv; 3 kv
FEATURES High reliability Low losses High capacitance in small size Kinked leads. APPLICATIONS In electronic circuits where low losses and high capacitance per volume are essential, for example: SMPS HF
More informationAMERICAN TECHNICAL CERAMICS INDUCTOR PRODUCTS. Manufactured for ATC
MERN TEHNL ERMS NUTOR PROUTS Manufactured for T ORPORTE PROLE orporate Profile merican Technical eramics orp. (T) provides component and custom integrated packaging solutions for the R, microwave and telecommunications
More informationApplications MDC K 50 A52 P3 TUBE. Capacitance Tolerance. J = ±5 K = ±10% Other tolerances on request. F 15 3 A A 333 K 050 T
Overview Dual in-line (DIL) metallized polyester (PET) film capacitor for surface mounting. Encapsulation in self-extinguishing material meeting the requirements of UL 94 V 0. Applications Typical applications
More informationMEJ2 Series 5.2kVDC Isolated 2W DC/DC Converters
www.murata-ps.com MEJ2 Series SELECTION GUIDE Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise (Typ)
More informationContent (RF Inductors) Multi-Layer High Frequency Inductors (IQ & HI Series) Cautions... 18
Content (RF Inductors) Multi-Layer High Inductors (IQ & HI Series)... 2 Ordering Code... 2 Standard External Dimensions... 3 High Q Type (IQ Series)... 4 Standard Type (HI Series)... 5 Testing Condition
More informationCapacitor Selection Guide High Temperature
Capacitor Selection Guide High Temperature 260 C 150 C Electronic Components EASY TO DESIGN IN Capacitor Simulation Tool ksim.kemet.com Made for Engineers by Engineers engineeringcenter.com Catalogs and
More informationSolid Tantalum Chip Capacitors TANTAMOUNT, Commercial, Surface Mount
Solid Tantalum Chip Capacitors PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C (To + 125 C with voltage derating) Note: Refer to Doc. 40088 Capacitance Range: 0.10 µf to
More informationMULTILAYER CERAMIC CHIP CAPACITORS
June 2016 CGA Series Automotive Grade Soft Termination Type: CGA2 [EIA CC0402] CGA3 [EIA CC0603] CGA4 [EIA CC0805] CGA5 [EIA CC1206] CGA6 [EIA CC1210] CGA7 [EIA CC1808] CGA8 [EIA CC1812] CGA9 [EIA CC2220]
More informationSolid Tantalum Surface Mount Capacitors TANTAMOUNT Molded Case, Low ESR
Solid Tantalum Surface Mount Capacitors TR3 FEATURES Terminations: 100 % Matte Tin, standard Tin/lead available Molded case available in six case codes Compatible with High Volume automatic pick and place
More informationQTCT230 SERIES 2.5 x 3.2mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 45.
Description Q-Tech s surface-mount QTCT230 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
More informationCGA Series. C Series. CEU Series. CGJ Series. CKC Series. CKG Series. CLL Series CAPACITOR PRODUCT SELECTION GUIDE
CAPACITOR PRODUCT SELECTION GUIDE C Series CEU Series CGA Series CGJ Series CKC Series CKG Series CLL Series Version B12 Oct/2012 TDK Corporation of America // 475 Half Day Road, Suite 300 :: Lincolnshire,
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
More informationThick Film Chip Resistors
FEATURES EIA STANDARD SIZING 01005(1/32), 0201(1/20), 0402(1/16), 0603(1/10), 0805(1/8), 1206(1/4), 1210(1/3), 2010(3/4) AND 2512(1) METAL GLAZED THICK FILM ON HIGH PURITY ALUMINA SUBSTRATE..(CERMET) PROVIDES
More informationTMJ Tantalum SMD S1gma TM Series Capacitors
The AVX S1gma TM series is offering a next generation of statistical screening and process control enhancement of tantalum capacitors for professional applications with improved reliability and extremely
More informationP7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
More informationMetallized Polypropylene Film Capacitor (Plastic Case) AC Application (2 or 4 pins)
The series is a polypropylene metallized film capacitor with plastic casing sealed with epoxy. This capacitor is suitable for use in AC filter circuits, Solar Inverter and Industrial Inverter. FEATURES
More informationAutomotive Surface Mount Fuses
Revision of November 206 Automotive Surface Mount Fuses Quick Index: Series Size Current Rating (A) Voltage Rating Page 0.5, 0.63, 0.75,.0,.5, 2.0 250VAC/25VDC QA240F 240 QA206F 206 QF206F 206 QF0603F
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. CERAMIC CHIP CAPACITORS C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics 10,
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationRated voltage Capacitance Cap. Tol. Suffix Suffix. Crimped taping. Ammo 3 E C Q P R Z. Rated voltage Capacitance 7.5 mm.
Polypropylene Film Capacitor Type: ECQP(Z) Non-inductive construction using Polypropylene film with epoxy resin coating Features Excellent temperature and frequency characteristics Excellent long term
More informationSELECTION GUIDE. Nominal Input Order Code 1 Voltage. Output Voltage
www.murata-ps.com NTE Series FEATURES RoHS compliant Lead frame technology Single isolated output 1kVDC Isolation Efficiency up to 78% Power density 1.8W/cm 3 Wide temperature performance at full 1 Watt
More informationALUMINUM ORGANIC CAPACITORS
ALUMINUM ORGANIC CAPACITORS A700 Series APPLICATIONS Input/Output Filters for voltage regulators, converters, and SMPS Battery Decoupling (portable, handheld electronics) Power Decoupling (Procesor, Transmitter
More informationSolidMatrix 1206 Fast Acting Surface Mount Fuses
SolidMatrix 1206 Fast Acting Surface Mount Fuses Features: Multilayer monolithic structure with glass ceramic body and silver fusing element Silver termination with nickel and pure-tin solder plating,
More information