2009 Price List For Seating

Transcription

1 2009 Price List For Seating Suggested List Price and Specifications Thank you for considering BioFit Engineered Products as your source for quality ergonomic equipment. We do offer an extensive selection of ergonomic products and options/accessories to permit you to customize your purchase for your particular application. Our well trained staff of Customer Service Representatives is ready to serve you and can assist you in determining the price of the exact model you want. Just give us a call at for our fast, friendly and courteous service! General Information How to Order 1. Give quantity, manufacturing code and any accessories for each item ordered. 2. Give upholstery and/or chrome or powder coat selections. 3. Give complete bill to and ship to addresses. Changes and Cancellations Once entered in our system orders may not be changed, cancelled or delayed without BioFit s consent. This will be determined depending on the stage of production and BioFit must be indemnified from loss. Thus the buyer will be responsible for material, labor or storage costs of changed, cancelled or delayed shipments. Once the merchandise has been shipped the buyer is obligated to accept delivery from the carrier. Special care should be taken when ordering Ship Now models to assure accuracy because they may ship the same day they are placed thus cancellations or changes may not be possible under any circumstances. Return Goods BioFit reserves the right to refuse return of any merchandise unless it is determined to be BioFit s responsibility. Any merchandise accepted for return must have prior written authorization and may be subject to a 25% restocking charge. Shipment Information Orders that total a minimum of $3, list qualify for free shipping*. For orders that do not meet the minimum, the cost for shipping is $10.00 per carton BioFit Seating Price Guide - V2 Rev Blanket wrapped, air-freight, other special delivery methods, or other special services (such as inside delivery, metro charge, lift gate, limited access, notify before delivery, etc.) are still available at extra cost and will be quoted on a case-by-case basis. * Free shipping includes surface transportation by BioFit s choice of carrier to anywhere in the lower 48 states. Shipments to Alaska, Hawaii, Puerto Rico or for export will be shipped to the lower 48 port of departure specified by you, the BioFit distributor, who will be responsible for the shipment from that point. Please contact our Logistics department for further information at Terms Prices are F.O.B. Payment -.5% 10, net 30, with interest applicable at the rate of 1.5% per month after 30 days. Upholsteries and Sizes For standard upholstery choices see our current color selector. Orders calling for customer s own material (C.O.M.) may be cancelled by BioFit, if, in its sole opinion, material is not properly workable. Sales Policy Possession of this price list does not necessarily suggest an offer to sell. Minimum Order BioFit does not have a minimum order.!"#$"%!&'("'))*)+!,*#+-.%/,010!!#2!345 67%)*8"99):!1;"#!<=>??@4345 A0B0C0!""#$%&#"'() *(+%,-!'.#+"!% /01-*(+%,-!'.#+.(' :;74894:<=83 >>><74894:<=83 TM Available on Many Models Starting July 1, 2009, BioFit accepts VISA and MasterCard with a nominal convenience fee of 3.25%, early payment terms will apply.

2 Intro BioFit Engineered Products offers a complete line of seating durable and dependable chairs and stools engineered for the rigors of the workplace plus user comfort and support. We can provide seating for your specific needs and most demanding applications because: and is backed by a strong 13-year, Sure-Seat Warranty. accessories, including special backrests, seats and armrests for customizing basic models. nents, and build chairs to meet your exact needs and fit your bottom line. The Balance of Form, Function and Bottom-Line Benefits Whether you have large manufacturing plants or small laboratories or school offices to furnish, seating in this catalog can get the job done. BioFit seating complies with ANSI/BIFMA X as established by the Business and Institutional Furniture Manufacturer s Association. ANS I/ BIFMA ANS I / X BioFit seating has been tested and certified as complying with ANSI/BIFMA X as established by the Business and Institutional Furniture B Manufacturer s Association (BIFMA). I FM A X Ergonomic design means increased comfort plus much more. The bottom-line benefits of ergonomic design in the workplace are proven. Investing in seating with good ergonomic benefits delivers proven competitive advantages: Need Chairs Now? 2 I n t r o Rely on BioFit when you need chairs now. BioFit s Ship Now! program offers hundreds of our most popular ergonomic chair models for shipment within 72 hours or less. Look for them throughout the price list. Here are the details: You can order up to 15 Ship Now! chairs per day. BioFit ships to you within 3 working days (after credit approval). In our catalog, most BT, BE, ET, EE and UU Series chairs are designated as Ship Now! Chairs within the series not offered on Ship Now! are so indicated. Color and Upholstery Specification Customize your chairs especially for your workplace with our selection of vinyl and cloth upholsteries and chrome or powder-coated finishes (black, putty, gray, silvervein or specific color match). At you can see a selection of upholsteries and our paint finishes. Click on a chair series and then click a specific chair to see the upholsteries and finishes. If you want to choose from a wider array of upholsteries, ask your BioFit agent for an Upholstery Selector, or contact BioFit

3 Calculate Your Proper Seat Height A basic formula to determine the correct seat height is the real work level (measuring floor to the height of the task) minus 12. We recommend that this be the midpoint of the seatheight adjustment range of the chair you select. For example: 38 (work level from floor to task height) (midpoint of seat-height adjustment range) Most of our chairs have a seat-height adjustment range of five, seven and even 10 inches. Having an adjustable variation upward and downward helps assure that the chair fits the size and body type of the worker. The chair also will be flexible enough to fit workers on different shifts or the same worker doing different tasks at a slightly changed work level. This broad formula applies to the majority of workers. Our ergonomic seating will properly fit 90 percent of workers without changes. For the other 10 percent, alterations can be made easily because of our modular construction. The seat-height range can be changed on the job site by simply adding or removing adapter tubes between the pneumatic cylinder and the base. Even if a chair base must be changed, it can easily be done onsite as well. Other options such as an adjustable footring, tilting seat and/or backrest assemblies, or a different ergonomic seat can be added to make a chair fit properly. 38 (work level from floor to task height) (midpoint of seat-height adjustment range) 3 BioFit 13-Year, Sure-Seat Warranty BioFit seating products are warranted against mechanical or structural failure due to defective material, workmanship, or abnormal wear for 13 years of normal use. Pneumatic cylinders are covered for the functional lifetime of the chair or stool. BioFit reserves the right to recondition or replace any units covered by this guarantee. Freight and any other consequential damages are not covered; all return shipments require written authorization and must be freight prepaid unless otherwise approved in writing. C.O.M. (customer s own material) upholstery materials are not covered. BioFit takes its warranty, repair and maintenance responsibilities very seriously. Efforts by unqualified personnel to perform repairs on seating products can result in dangerous conditions which can lead to serious bodily injury. Any attempt to modify, alter or make unauthorized repairs to BioFit products may not only seriously jeopardize the safety of the user, but will void this warranty in every respect. Need a Quick Quote? Go > > Get-a-Quote

4 Product Locator This visual table of contents will help you identify BioFit seating for your workplace application. The series name and page number will help you locate the pricing for that product. The chairs or stools shown in each box represent a series of seating products in this price list. For example, the first box depicts the BT Series chair models presented on pages 7-10, while the second box represents the BE Series on pages Most chairs and stools are available with a variety of bases and options. BT Series / 7-10 FC Series / BE Series / HC Series / ET Series / FL Series / EE Series / HL-VF Series / MM Series / FC-VF Series / AE Series / HC-VF Series / AM Series / FL-VF Series / HL Series / Intensive Plus / 67-68

5 Office Chairs / RT-VF Series / GG Series / TX Series / UU Series / CX Series / KX Series / A Series / 2A-VF Series / WW Series / Y Series / RX Series / Specialty Stools / RX-VF Series / Footrests / 116 RT Series / Need a Quick Quote? Go > > Get-a-Quote

6 Manufacturing Code Equation Example manufacturing code: AEN1722R The first letter defines the seat A = Avalon The second letter defines the backrest E = ERB The third letter defines the base N = Nylon The set of numbers after the base defines the seat height range 1722 = (Note: The seat height range is inclusive of casters if the manufacturing code includes the casters as standard.) The next letter or letters defines the caster type R = R style single wheel casters (Note: If you are ordering a different type of caster, you will add that option code here.) After this, option codes and/or performance packages can be added to the manufactuing code. For example, if you are ordering an AEN1722R with an executive seat control (EXE option), bellows (BL option), height adjustable urethane arms (PSAS option), and dual wheel casters for hard floors (CRC option), your manufacturing code will be: AEN1722-CRC-BL-EXE-PSAS. 6 Height adjustable urethane arms (PSAS option) Executive seat control (EXE option) Bellows (BL option) Dual wheel casters (CRC option)

7 These chairs are the workhorses of our product line durable, tough and reasonably priced. They are used in industries of all kinds and in laboratories, schools, health care settings, offices, and critical environments such as clean rooms and static control/esd situations (with performance packages added). The Task Control and lumbar support provide basic ergonomic benefits. These chairs are available on our Ship Now! quick-ship program. BT Series BT Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 14.5" wide x 9.5" high, lumbar support, plastic protective panel. Seat: concave, 18.5" wide x 16.5" deep x 3" thick with internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the BTN and BTP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many vinyl and fabric upholstery choices are available to meet your needs. 7 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

8 BT Series 1P/BTT Seat-Height Tubular Price Model # 1P * P57-R 1P41-R 1P42 1P58-R 1P61 1P42-R 1P61-R 1P62 1P62-R 1P63 BTT1722 BTT1722R BTT1924R BTT1926 BTT1926R BTT2126 BTT2128R BTT2328R BTT2530 BTT2732R BTT2934 Gr.2 Gr.3 Gr.4 $388 $438 $470 $417 $417 $417 $447 $394 $447 $424 $399 $429 $406 $468 $468 $468 $497 $445 $497 $474 $450 $479 $456 $499 $499 $499 $529 $476 $529 $506 $481 $511 $488 8 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K $141 $191 $225 $153 $203 $262 $330 s. C10. F10. C10-K. N10 $382 $309 $450 $381. C1 $411. C1-K $479. F10-K $377. Upcharge to Gr. 2 1Q/BTC Seat-Height Cast Aluminum Price Model # 1Q70 * * 1Q51-R 1Q70-R 1Q72 1Q52-R 1Q43 1Q72-R 1Q73 1Q53-R 1Q43-R 1Q64 1Q64-R 1Q66 1Q66-R BTC1722 BTC1722R BTC1924R BTC1926 BTC1926R BTC2126 BTC2128R BTC2232 BTC2232R BTC2328R BTC2328 BTC2530R BTC2631 BTC2833R Gr.2 Gr.3 Gr.4 $398 $449 $480 $428 $428 $428 $457 $401 $457 $440 $470 $430 $404 $433 $406 $435 $478 $478 $478 $508 $451 $508 $491 $520 $480 $454 $483 $456 $486 $510 $510 $510 $539 $482 $539 $522 $552 $512 $486 $515 $488 $517 Base C: 5-legged cast aluminum, 23 leg spread s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. Upcharge to Gr. 2 * Unit standard with casters Not available with casters All models are available on ShipNow except with a symbol $96 $128 $153 $96 $159 $184 $252 s. C10. F10. C10-K. N10. C1 $320 $231 $388 $319 $349. C1-K $417. F10-K $300

9 1Q-CAB/BTN Seat-Height Reinforced Nylon Price Model # 1Q70-CAB * * 1Q51-R-CAB 1Q70-R-CAB 1Q72-CAB 1Q52-R-CAB 1Q43-CAB 1Q72-R-CAB 1Q73-CAB 1Q53-R-CAB 1Q43-R-CAB 1Q64-CAB 1Q64-R-CAB 1Q66-CAB 1Q66-R-CAB BTN1722 BTN1722R BTN1924R BTN1926 BTN1926R BTN2126 BTN2128R BTN2232 BTN2232R BTN2328R BTN2328 BTN2530R BTN2631 BTN2833R Gr.2 Gr.3 Gr.4 $383 $433 $465 $412 $412 $412 $441 $385 $441 $425 $454 $414 $388 $417 $390 $419 $462 $462 $462 $492 $435 $492 $475 $504 $465 $438 $468 $440 $470 $494 $494 $494 $523 $467 $523 $507 $536 $496 $470 $499 $472 $501 9 Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 1Q-PAL/BTP Seat-Height Polished Aluminum Price Model # Gr.2 Gr.3 Gr.4 1Q70-PAL BTP1722 $454 $504 $536 1Q51-R-PAL 1Q70-R-PAL 1Q72-PAL 1Q52-R-PAL 1Q43-PAL 1Q72-R-PAL 1Q73-PAL BTP1722R BTP1924R BTP1926 BTP1926R BTP2126 BTP2128R BTP2232 $483 $483 $483 $513 $456 $513 $496 $534 $534 $534 $563 $507 $563 $546 $565 $565 $565 $595 $538 $595 $578 * 1Q53-R-PAL 1Q43-R-PAL 1Q64-PAL BTP2232R BTP2328R BTP2328 $525 $486 $459 $576 $536 $510 $607 $567 $541 1Q64-R-PAL BTP2530R $489 $539 $ Q66-PAL BTP2631 $461 $512 $ * 1Q66-R-PAL BTP2833R $491 $541 $573 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K $96 $128 $153 $96 $159 $184 $252 s. C10. F10. C10-K. N10. C1 $320 $231 $388 $319 $349. C1-K $417. F10-K $300. Upcharge to Gr. 2 All specifications are nominal.

10 10 BT Series s We offer a number of high-tech performance packages on most of our upholstered chairs static control/esd, clean room Class 1, Class 1Max (loaded with ergonomic features), Class 10, Class 100 and Class 1000, and all of these clean room packages in combination with static control/esd features. For more information on clean room and static control/ ESD packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. = Ship Now Seats A saddle-shaped, contoured seat with waterfall front, 21 wide x 19 deep x 3 thick $105 M (MOC) ergonomic seat with waterfall front, 21 wide x 19 deep x 3 thick $95 S ergonomic seat with waterfall front, 21 wide x 17 deep x 3 thick; intended for use by individuals of shorter stature $71 VU upholstered underwrap in the same upholstery as the seat $29 *FM Memory Foam $33 *Available on A or E seat only Backrests Finish M (EMB) larger ergonomic backrest, 18 wide x 19 high, for both lower and upper back support; available on chairs with a seat height no higher than 32 $78 A (ERN) narrow, 8 wide x 12 high, spinal support with lumbar curve $20 Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example BTN2030). Chrome Finish on The NeuFlexMatic $70 While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Articulating Seat Control (ASC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently and lock into place with one lever. ASC/VUV $173 ASC/C1/C10 $176 Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 FFAC/VUV $173 Armrests Footrings *ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/CLN $238 ARS/ESD/$174 ARS/ESD/CLN $293 *ARU height and width adjustable with upholstered pads ARU $146 ARU/CLN $265 ARU/ESD/$188 ARU/ESD/CLN $307 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/CLN $114 PSAS/ESD $114 PSAS/ESD/CLN $123 PSAU height adjustable with upholstered pads PSAU $101 PSAU/CLN $140 PSAU/ESD $140 PSAU/ESD/CLN $173 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Fire Retardant NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price *Not available on C10 or C1 Need a Quick Quote? Go > > Get-a-Quote

11 A larger, more ergonomic backrest is featured on BE Series chairs. These models offer the toughness and durability of their BT Series counterparts. In addition, they offer a higher and wider backrest for greater overall support. BE Series chairs, like the BT models, are widely used in industry, laboratories, schools, health care facilities, offices, and critical environments such as clean rooms and static control/esd situations (with performance packages added). These chairs are available on our Ship Now! quickship program. BE Series BE Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 15.5" wide x 14.5" high, lumbar support, plastic protective panel. Seat: concave, 18.5" wide x 16.5" deep x 3" thick with internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the BEN and BEP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many vinyl and fabric upholstery choices are available to meet your needs. 11 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

12 12BE Series Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 1P-ERB/BET Seat-Height Tubular Price Model # 1P41-ERB * s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. Upcharge to Gr. 2 1P57-R-ERB 1P41-R-ERB 1P42-ERB 1P58-R-ERB 1P61-ERB 1P42-R-ERB 1P61-R-ERB 1P62-ERB 1P62-R-ERB 1P63-ERB $141 $191 $225 $153 $203 $262 $330 BET1722 BET1722R BET1924R BET1926 BET1926R BET2126 BET2128R BET2328R BET2530 BET2732R BET2934 s. C10. F10. C10-K. N10 Gr.2 Gr.3 Gr.4 $415 $466 $497 $445 $445 $445 $474 $422 $474 $451 $427 $456 $433 $495 $495 $495 $524 $472 $524 $501 $477 $507 $483 $382 $309 $450 $381. C1 $411. C1-K $479. F10-K $377 $527 $527 $527 $556 $503 $556 $533 $509 $538 $515 1Q-ERB/BEC Seat-Height Cast Aluminum Price Model # 1Q70-ERB * * 1Q51-R-ERB 1Q70-R-ERB 1Q72-ERB 1Q52-R-ERB 1Q43-ERB 1Q72-R-ERB 1Q73-ERB 1Q53-R-ERB 1Q43-R-ERB 1Q64-ERB 1Q64-R-ERB 1Q66-ERB 1Q66-R-ERB BEC1722 BEC1722R BEC1924R BEC1926 BEC1926R BEC2126 BEC2128R BEC2232 BEC2232R BEC2328R BEC2328 BEC2530R BEC2631 BEC2833R Gr.2 Gr.3 Gr.4 $426 $476 $508 $455 $455 $455 $485 $428 $485 $468 $497 $457 $431 $460 $433 $462 $506 $506 $506 $535 $478 $535 $518 $548 $508 $481 $511 $483 $513 $537 $537 $537 $566 $510 $566 $550 $579 $539 $513 $542 $515 $544 Base C: 5-legged cast aluminum, 23 leg spread s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. Upcharge to Gr. 2 $96 $128 $153 $96 $159 $184 $252 s. C10. F10. C10-K. N10. C1 $320 $231 $388 $319 $349. C1-K $417. F10-K $300 * Unit standard with casters Not available with casters All models are available on ShipNow except with a symbol

13 1Q-CAB-ERB/BEN Seat-Height Reinforced Nylon Price Model # 1Q70-CAB-ERB * * 1Q51-R-CAB-ERB 1Q70-R-CAB-ERB 1Q72-CAB-ERB 1Q52-R-CAB-ERB 1Q43-CAB-ERB 1Q72-R-CAB-ERB 1Q73-CAB-ERB 1Q53-R-CAB-ERB 1Q43-R-CAB-ERB 1Q64-CAB-ERB 1Q64-R-CAB-ERB 1Q66-CAB-ERB 1Q66-R-CAB-ERB BEN1722 BEN1722R BEN1924R BEN1926 BEN1926R BEN2126 BEN2128R BEN2232 BEN2232R BEN2328R BEN2328 BEN2530R BEN2631 BEN2833R Gr.2 $410 $460 $439 $439 $439 $469 $412 $469 $452 $481 $441 $415 $445 $417 $447 Gr.3 $490 $490 $490 $519 $462 $519 $502 $532 $492 $466 $495 $468 $497 Gr.4 $492 $521 $521 $521 $551 $494 $551 $534 $563 $523 $497 $527 $499 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 1Q-PAL-ERB/BEP Seat-Height Polished Aluminum Price Model # 1Q70-PAL-ERB * * 1Q51-R-PAL-ERB 1Q70-R-PAL-ERB 1Q72-PAL-ERB 1Q52-R-PAL-ERB 1Q43-PAL-ERB 1Q72-R-PAL-ERB 1Q73-PAL-ERB 1Q53-R-PAL-ERB 1Q43-R-PAL-ERB 1Q64-PAL-ERB 1Q64-R-PAL-ERB 1Q66-PAL-ERB 1Q66-R-PAL-ERB BEP1722 BEP1722R BEP1924R BEP1926 BEP1926R BEP2126 BEP2128R BEP2232 BEP2232R BEP2328R BEP2328 BEP2530R BEP2631 BEP2833R Gr.2 $481 $532 $511 $511 $511 $540 $483 $540 $523 $553 $513 $487 $516 $489 $518 Gr.3 $561 $561 $561 $591 $534 $591 $574 $603 $563 $537 $566 $539 $569 Gr.4 $563 $593 $593 $593 $622 $565 $622 $605 $635 $595 $569 $598 $571 $600 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. Upcharge to Gr. 2 $96 $128 $153 $96 $159 $184 $252 s. C10. F10. C10-K. N10. C1 $320 $231 $388 $319 $349. C1-K $417. F10-K $300 All specifications are nominal.

14 14 BE Series s We offer a number of high-tech performance packages on most of our upholstered chairs static control/esd, clean room Class 1, Class 1Max (loaded with ergonomic features), Class 10, Class 100 and Class 1000, and all of these clean room packages in combination with static control/esd features. For more information on clean room and static control/ ESD packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. = Ship Now Seats A saddle-shaped, contoured seat with waterfall front, 21 wide x 19 deep x 3 thick $105 M (MOC) ergonomic seat with waterfall front, 21 wide x 19 deep x 3 thick $95 S ergonomic seat with waterfall front, 21 wide x 17 deep x 3 thick; intended for use by individuals of shorter stature $71 VU upholstered underwrap in the same upholstery as the seat $29 *FM Memory Foam $33 *Available on A or E seat only Backrests Finish M (EMB) larger ergonomic backrest, 18 wide x 19 high, for both lower and upper back support; available on chairs with a seat height no higher than 32 $51 A (ERN) narrow, 8 wide x 12 high, spinal support with lumbar curve -$8 (deduct) Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example BEN2030). Chrome Finish on The NeuFlexMatic $70 While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Articulating Seat Control (ASC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently and lock into place with one lever. ASC/VUV $173 ASC/C1/C10 $176 Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 FFAC/VUV $173 Armrests Footrings *ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/CLN $238 ARS/ESD/$174 ARS/ESD/CLN $293 *ARU height and width adjustable with upholstered pads ARU $146 ARU/CLN $265 ARU/ESD/$188 ARU/ESD/CLN $307 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/CLN $114 PSAS/ESD $114 PSAS/ESD/CLN $123 PSAU height adjustable with upholstered pads PSAU $101 PSAU/CLN $140 PSAU/ESD $140 PSAU/ESD/CLN $173 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Fire Retardant NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price *Not available on C10 or C1 Need a Quick Quote? Go > > Get-a-Quote

15 The ergonomic support provided by these chairs makes them a win-win selection for industrial applications as well as for laboratories, offices, and critical environments such as clean rooms and static control/esd situations (with performance packages added). Users will appreciate the chair s contoured backrest with lumbar support and waterfall-front seat. These chairs are available on our Ship Now! quick-ship program. ET Series ET Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 14.5" wide x 9.5" high, lumbar support, plastic protective panel. Seat: ergonomic, 18.5" wide x 17" deep x 3" thick with waterfall front, four-way contouring and internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the ETN and ETP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many vinyl and fabric upholstery choices are available to meet your needs. 15 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

16 16ET Series Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 4P/ETT Seat-Height Tubular Price Model # 4P * s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. upcharge to Gr. 2 4P57-R 4P41-R 4P42 4P58-R 4P61 4P42-R 4P61-R 4P62 4P62-R 4P63 $141 $191 $225 $153 $203 $262 $330 ETT1722 ETT1722R $467 ETT1924R ETT1926 ETT1926R ETT2126 ETT2128R ETT2328R ETT2530 ETT2732R ETT2934 s. C10. F10. C10-K. N10 Gr.2 Gr.3 Gr.4 $437 $488 $519 $467 $467 $496 $444 $496 $473 $449 $478 $455 $517 $517 $517 $546 $494 $546 $523 $499 $529 $506 $382 $309 $450 $381. C1 $411. C1-K $479. F10-K $377 4Q/ETC Seat-Height Cast Aluminum Price Model # 4Q70 * * 4Q51-R 4Q70-R 4Q72 4Q52-R 4Q43 4Q72-R 4Q73 4Q53-R 4Q43-R 4Q64 4Q64-R 4Q66 4Q66-R ETC1722 ETC1722R $477 ETC1924R ETC1926 ETC1926R ETC2126 ETC2128R ETC2232 ETC2232R ETC2328R ETC2328 ETC2530R ETC2631 ETC2833R $477 $477 $507 $450 $507 $490 $528 $528 $528 $557 $500 $557 $540 $549 $549 $549 $578 $525 $578 $555 $531 $560 $537 Gr.2 Gr.3 Gr.4 $448 $498 $530 $519 $479 $453 $482 $455 $485 $570 $530 $503 $533 $506 $535 $559 $559 $559 $588 $532 $588 $572 $601 $561 $535 $564 $537 $566 Base C: 5-legged cast aluminum, 23 leg spread s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. Upcharge to Gr. 2 * Unit standard with casters Not available with casters All models are available on ShipNow except with a symbol $96 $128 $153 $96 $159 $184 $252 s. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. F10-K $300

17 4Q-CAB/ETN Seat-Height Reinforced Nylon Price Model # 4Q70-CAB * * 4Q51-R-CAB 4Q70-R-CAB 4Q72-CAB 4Q52-R-CAB 4Q43-CAB 4Q72-R-CAB 4Q73-CAB 4Q53-R-CAB 4Q43-R-CAB 4Q64-CAB 4Q64-R-CAB 4Q66-CAB 4Q66-R-CAB ETN1722 ETN1722R $461 ETN1924R ETN1926 ETN1926R ETN2126 ETN2128R ETN2232 ETN2232R ETN2328R ETN2328 ETN2530R ETN2631 ETN2833R Gr.2 Gr.3 Gr.4 $432 $482 $514 $461 $461 $491 $434 $491 $474 $503 $464 $437 $467 $439 $469 $512 $512 $512 $541 $485 $541 $524 $554 $514 $488 $517 $490 $519 $543 $543 $543 $573 $516 $573 $556 $585 $545 $519 $549 $521 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 4Q-PAL/ETP Seat-Height Polished Aluminum Price * * Model # 4Q70-PAL 4Q51-R-PAL ETP1722R $533 4Q70-R-PAL 4Q72-PAL 4Q52-R-PAL 4Q43-PAL 4Q72-R-PAL 4Q73-PAL 4Q53-R-PAL 4Q43-R-PAL 4Q64-PAL 4Q64-R-PAL 4Q66-PAL 4Q66-R-PAL ETP1722 ETP1924R ETP1926 ETP1926R ETP2126 ETP2128R ETP2232 ETP2232R ETP2328R ETP2328 ETP2530R ETP2631 ETP2833R Gr.2 Gr.3 Gr.4 $503 $554 $585 $533 $533 $562 $506 $562 $545 $575 $535 $509 $538 $511 $540 $583 $583 $583 $613 $556 $613 $596 $625 $585 $559 $588 $561 $591 $615 $615 $615 $644 $587 $644 $627 $657 $617 $591 $620 $593 $622 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184 s. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K $252. F10-K $300. Upcharge to Gr. 2 All specifications are nominal.

18 18 ET Series s We offer a number of high-tech performance packages on most of our upholstered chairs static control/esd, clean room Class 1, Class 1Max (loaded with ergonomic features), Class 10, Class 100 and Class 1000, and all of these clean room packages in combination with static control/esd features. For more information on clean room and static control/ ESD packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. = Ship Now Seats A saddle-shaped, contoured seat with waterfall front, 21 wide x 19 deep x 3 thick $56 M (MOC) ergonomic seat with waterfall front, 21 wide x 19 deep x 3 thick $46 S ergonomic seat with waterfall front, 21 wide x 17 deep x 3 thick; intended for use by individuals of shorter stature $21 VU upholstered underwrap in the same upholstery as the seat $29 *FM Memory Foam $33 *Available on A or E seat only Backrests Finish M (EMB) larger ergonomic backrest, 18 wide x 19 high, for both lower and upper back support; available on chairs with a seat height no higher than 32 $78 A (ERN) narrow, 8 wide x 12 high, spinal support with lumbar curve $20 Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example ETN2030). Chrome Finish on The NeuFlexMatic $70 While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Articulating Seat Control (ASC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently and lock into place with one lever. ASC/VUV $173 ASC/C1/C10 $176 Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 FFAC/VUV $173 Armrests Footrings *ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/CLN $238 ARS/ESD/$174 ARS/ESD/CLN $293 *ARU height and width adjustable with upholstered pads ARU $146 ARU/CLN $265 ARU/ESD/$188 ARU/ESD/CLN $307 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/CLN $114 PSAS/ESD $114 PSAS/ESD/CLN $123 PSAU height adjustable with upholstered pads PSAU $101 PSAU/CLN $140 PSAU/ESD $140 PSAU/ESD/CLN $173 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Fire Retardant NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price *Not available on C10 or C1 Need a Quick Quote? Go > > Get-a-Quote

19 These chairs are the comfort solution for a host of applications in plants, laboratories, offices, and critical environments such as clean rooms and static control/esd situations (with performance packages added). They feature a large ergonomic backrest with lumbar curve, a comfortable waterfall-front seat with four-way contouring for proper weight distribution, and controls for easy adjustment. These chairs are available on our Ship Now! quick-ship program. EE Series EE Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 15.5" wide x 14.5" high, lumbar support, plastic protective panel. Seat: ergonomic, 18.5" wide x 17" deep x 3" thick with waterfall front, four-way contouring and internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the EEN and EEP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many vinyl and fabric upholstery choices are available to meet your needs. 19 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

20 20EE Series Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 4V/EET Seat-Height Tubular Price Model # 4V * s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. upcharge to Gr. 2 4V57-R 4V41-R 4V42 4V58-R 4V61 4V42-R 4V61-R 4V62 4V62-R 4V63 $141 $191 $225 $153 $203 $262 $330 EET1722 EET1722R $494 EET1924R EET1926 EET1926R EET2126 EET2128R EET2328R EET2530 EET2732R EET2934 s. C10. F10. C10-K. N10 Gr.2 Gr.3 Gr.4 $465 $515 $546 $494 $494 $523 $471 $523 $500 $476 $506 $482 $544 $544 $544 $574 $521 $574 $551 $527 $556 $533 $382 $309 $450 $381. C1 $411. C1-K $479. F10-K $377 $576 $576 $576 $605 $553 $605 $582 $558 $587 $564 4X/EEC Seat-Height Cast Aluminum Price Model # 4X70 * * 4X51-R 4X70-R 4X72 4X52-R 4X43 4X72-R 4X73 4X53-R 4X43-R 4X64 4X64-R 4X66 4X66-R EEC1722 EEC1722R $504 EEC1924R EEC1926 EEC1926R EEC2126 EEC2128R EEC2232 EEC2232R EEC2328R EEC2328 EEC2530R EEC2631 EEC2833R Gr.2 Gr.3 Gr.4 $475 $525 $557 $504 $504 $534 $477 $534 $517 $546 $507 $480 $510 $482 $512 $555 $555 $555 $584 $528 $584 $567 $597 $557 $531 $560 $533 $562 $586 $586 $586 $616 $559 $616 $599 $628 $588 $562 $592 $564 $594 Base C: 5-legged cast aluminum, 23 leg spread s. K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184 s. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K. Upcharge to Gr. 2 $252. F10-K $300 * Unit standard with casters Not available with casters All models are available on ShipNow except with a symbol

21 4X-CAB/ERA/EEN Seat-Height Reinforced Nylon Price * * Model # 4X70-CAB 4X51-R-CAB EEN1722R $489 4X70-R-CAB 4X72-CAB 4X52-R-CAB 4X43-CAB 4X72-R-CAB 4X73-CAB 4X53-R-CAB 4X43-R-CAB 4X64-CAB 4X64-R-CAB 4X66-CAB 4X66-R-CAB EEN1722 EEN1924R EEN1926 EEN1926R EEN2126 EEN2128R EEN2232 EEN2232R EEN2328R EEN2328 EEN2530R EEN2631 EEN2833R Gr.2 Gr.3 Gr.4 $459 $510 $541 $489 $489 $518 $461 $518 $501 $531 $491 $465 $494 $467 $496 $539 $539 $539 $569 $512 $569 $552 $581 $541 $515 $544 $517 $546 $571 $571 $571 $600 $543 $600 $583 $613 $573 $546 $576 $549 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 4X-PAL/EEP Seat-Height Polished Aluminum Price Model # 4X70-PAL * * 4X51-R-PAL 4X70-R-PAL 4X72-PAL 4X52-R-PAL 4X43-PAL 4X72-R-PAL 4X73-PAL 4X53-R-PAL 4X43-R-PAL 4X64-PAL 4X64-R-PAL 4X66-PAL 4X66-R-PAL EEP1722 EEP1722R $560 EEP1924R EEP1926 EEP1926R EEP2126 EEP2128R EEP2232 EEP2232R EEP2328R EEP2328 EEP2530R EEP2631 EEP2833R Gr.2 Gr.3 Gr.4 $531 $581 $613 $560 $560 $590 $533 $590 $573 $602 $562 $536 $565 $538 $567 $611 $611 $611 $640 $583 $640 $623 $653 $613 $586 $616 $588 $618 $642 $642 $642 $671 $615 $671 $655 $684 $644 $618 $647 $620 $649 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184 s. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K. Upcharge to Gr. 2 $252. F10-K $300 All specifications are nominal.

22 22 EE Series s We offer a number of high-tech performance packages on most of our upholstered chairs static control/esd, clean room Class 1, Class 1Max (loaded with ergonomic features), Class 10, Class 100 and Class 1000, and all of these clean room packages in combination with static control/esd features. For more information on clean room and static control/ ESD packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. = Ship Now Seats A saddle-shaped, contoured seat with waterfall front, 21 wide x 19 deep x 3 thick $56 M (MOC) ergonomic seat with waterfall front, 21 wide x 19 deep x 3 thick $46 S ergonomic seat with waterfall front, 21 wide x 17 deep x 3 thick; intended for use by individuals of shorter stature $21 VU upholstered underwrap in the same upholstery as the seat $29 *FM Memory Foam $33 *Available on A or E seat only Backrests Finish M (EMB) larger ergonomic backrest, 18 wide x 19 high, for both lower and upper back support; available on chairs with a seat height no higher than 32 $51 A (ERN) narrow, 8 wide x 12 high, spinal support with lumbar curve -$8 (deduct) Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example EEN2030). Chrome Finish on The NeuFlexMatic $70 While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Articulating Seat Control (ASC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently and lock into place with one lever. ASC/VUV $173 ASC/C1/C10 $176 Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 FFAC/VUV $173 Armrests Footrings *ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/CLN $238 ARS/ESD/$174 ARS/ESD/CLN $293 *ARU height and width adjustable with upholstered pads ARU $146 ARU/CLN $265 ARU/ESD/$188 ARU/ESD/CLN $307 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/CLN $114 PSAS/ESD $114 PSAS/ESD/CLN $123 PSAU height adjustable with upholstered pads PSAU $101 PSAU/CLN $140 PSAU/ESD $140 PSAU/ESD/CLN $173 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Fire Retardant NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price *Not available on C10 or C1 Need a Quick Quote? Go > > Get-a-Quote

23 These chairs are especially supportive and comfortable for those who prefer more upper-back support. Features include a taller and wider backrest plus a wider and deeper seat with waterfall front. The upholstery is protected with bumperguards for durability in plants, laboratories, offices, and critical environments such as clean rooms and static control/esd situations (with performance packages added). MM Series MM Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 18" wide x 19" high, lumbar support, plastic protective panel. Seat: ergonomic, 21" wide x 19" deep x 3" thick with waterfall front, four-way contouring and internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the MMN and MMP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many vinyl and fabric upholstery choices are available to meet your needs. 23 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

24 24MM Series Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread MMT Seat-Height Tubular Price * s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. upcharge to Gr. 2 MMT1722 MMT1722R $590 MMT1924R MMT1926 MMT1926R MMT2126 MMT2128R MMT2328R MMT2530 MMT2732R $141 $191 $225 $153 $203 $262 $330 Gr.2 $590 $590 $619 $566 $619 $596 $572 $601 Gr.3 $560 $611 $640 $640 $640 $669 $617 $669 $646 $622 $651 s. C10. F10. C10-K. N10 Gr.4 $642 $671 $671 $671 $701 $648 $701 $678 $654 $683 $382 $309 $450 $381. C1 $411. C1-K $479. F10-K $377 MMC Seat-Height Cast Aluminum Price * MMC1722 MMC1722R $600 MMC1924R MMC1926 MMC1926R MMC2126 MMC2128R MMC2232 MMC2232R MMC2328R MMC2328 MMC2530R MMC2631 Gr.2 Gr.3 Gr.4 $571 $621 $653 $600 $600 $629 $573 $629 $613 $642 $602 $576 $605 $578 $650 $650 $650 $680 $623 $680 $663 $692 $653 $626 $656 $628 $682 $682 $682 $711 $655 $711 $695 $724 $684 $658 $687 $660 s s Base C: 5-legged cast aluminum, 23 leg spread. K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K $252. F10-K $300. Upcharge to Gr. 2 * Unit standard with casters Not available with casters

25 MMN Seat-Height Reinforced Nylon Price * MMN1722 MMN1722R $584 MMN1924R MMN1926 MMN1926R MMN2126 MMN2128R MMN2232 MMN2232R MMN2328R MMN2328 MMN2530R MMN2631 Gr.2 Gr.3 Gr.4 $555 $605 $637 $584 $584 $614 $557 $614 $597 $626 $586 $560 $590 $562 $635 $635 $635 $664 $607 $664 $647 $677 $637 $611 $640 $613 $666 $666 $666 $696 $639 $696 $679 $708 $668 $642 $671 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use MMP Seat-Height Polished Aluminum Price * MMP1722 MMP1722R $656 MMP1924R MMP1926 MMP1926R MMP2126 MMP2128R MMP2232 MMP2232R MMP2328R MMP2328 MMP2530R MMP2631 Gr.2 Gr.3 Gr.4 $626 $677 $708 $656 $656 $685 $628 $685 $668 $698 $658 $632 $661 $634 $706 $706 $706 $735 $679 $735 $719 $748 $708 $682 $711 $684 $738 $738 $738 $767 $710 $767 $750 $780 $740 $713 $743 $716 s s Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster). K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K $252. F10-K $300. Upcharge to Gr. 2 All specifications are nominal.

26 MM Series 26 s We offer a number of high-tech performance packages on most of our upholstered chairs static control/esd, clean room Class 1, Class 1Max (loaded with ergonomic features), Class 10, Class 100 and Class 1000, and all of these clean room packages in combination with static control/esd features. For more information on clean room and static control/ ESD packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests *ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/CLN $238 ARS/ESD/$174 ARS/ESD/CLN $293 *ARU height and width adjustable with upholstered pads ARU $146 ARU/CLN $265 ARU/ESD/$188 ARU/ESD/CLN $307 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Articulating Seat Control (ASC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently and lock into place with one lever. ASC/VUV $173 ASC/C1/C10 $176 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/CLN $114 PSAS/ESD $114 PSAS/ESD/CLN $123 PSAU height adjustable with upholstered pads PSAU $101 PSAU/CLN $140 PSAU/ESD $140 PSAU/ESD/CLN $173 Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Footrings ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 FFAC/VUV $173 SLD Seat slider bracket allows seat depth adjustment range of up to 2.5 with locking positions every 0.5. Add to the standard task control, the FFAC or EXE control. Available only on N or P base with maximum seat height of 26 or less. Not recommended on clean room models. SLD $93 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price VU upholstered underwrap in the same upholstery as the seat $29 *Not available on C10 or C1 Need a Quick Quote? Go > > Get-a-Quote

27 These chairs offer an excellent combination of durability, comfort and ergonomic support for a variety of workplaces. The chairs are loaded with ergonomic features that help users remain fresh and productive over long work sessions. A sculptured (saddle-shaped) seat with waterfall front improves circulation and reduces strain on the lower legs. A generous-sized ergonomic backrest provides support for the low back. AE Series AE Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 15.5" wide x 14.5" high, lumbar support, plastic protective panel. Seat: saddle-shaped, contoured, 21" wide x 19" deep x 3" thick with waterfall front, and internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chromeplated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the AEN and AEP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many vinyl and fabric upholstery choices are available to meet your needs. 27 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

28 28AE Series Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread AET Seat-Height Tubular Price * s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. upcharge to Gr. 2 AET1722 AET1722R $550 AET1924R AET1926 AET1926R AET2126 AET2128R AET2328R AET2530 AET2732R AET2934 $141 $191 $225 $153 $203 $262 $330 Gr.2 Gr.3 Gr.4 $520 $571 $602 $550 $550 $579 $527 $579 $556 $532 $561 $538 $600 $600 $600 $629 $577 $629 $606 $582 $612 $588 s. C10. F10. C10-K. N10 $632 $632 $632 $661 $608 $661 $638 $614 $643 $620 $382 $309 $450 $381. C1 $411. C1-K $479. F10-K $377 AEC Seat-Height Cast Aluminum Price * * AEC1722 AEC1722R $560 AEC1924R AEC1926 AEC1926R AEC2126 AEC2128R AEC2232 AEC2232R AEC2328R AEC2328 AEC2530R AEC2631 AEC2833R Gr.2 Gr.3 Gr.4 $531 $581 $613 $560 $560 $590 $533 $590 $573 $602 $562 $536 $565 $538 $611 $611 $611 $640 $583 $640 $623 $653 $613 $586 $616 $588 $642 $642 $642 $671 $615 $671 $655 $684 $644 $618 $647 $620 $567 $618 $649 s s Base C: 5-legged cast aluminum, 23 leg spread. K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K $252. F10-K $300. Upcharge to Gr. 2 * Unit standard with casters Not available with casters

29 AEN Seat-Height Reinforced Nylon Price * * AEN1722 AEN1722R AEN1924R AEN1926 AEN1926R AEN2126 AEN2128R AEN2232 AEN2232R AEN2328R AEN2328 AEN2530R AEN2631 AEN2833R Gr.2 Gr.3 Gr.4 $515 $565 $597 $544 $544 $544 $574 $517 $574 $557 $546 $520 $550 $522 $595 $595 $595 $624 $567 $624 $607 $597 $571 $600 $573 $626 $626 $626 $656 $599 $656 $639 $586 $637 $668 $628 $602 $632 $604 $552 $602 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use AEP Seat-Height Polished Aluminum Price * AEP1722 AEP1722R $616 AEP1924R AEP1926 AEP1926R AEP2126 AEP2128R AEP2232 AEP2232R AEP2328R AEP2328 AEP2530R AEP2631 Gr.2 Gr.3 Gr.4 $586 $637 $668 $616 $616 $645 $588 $645 $628 $658 $618 $592 $621 $594 $666 $666 $666 $696 $639 $696 $679 $708 $668 $642 $671 $644 $698 $698 $698 $727 $670 $727 $710 $740 $700 $674 $703 $ * AEP2833R $623 $674 $705 s s Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster). K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K $252. F10-K $300. Upcharge to Gr. 2 All specifications are nominal.

30 AE Series s Finish Casters and Glides 30 We offer a number of high-tech performance packages on most of our upholstered chairs static control/esd, clean room Class 1, Class 1Max (loaded with ergonomic features), Class 10, Class 100 and Class 1000, and all of these clean room packages in combination with static control/esd features. For more information on clean room and static control/ ESD packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests *ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/CLN $238 ARS/ESD/$174 ARS/ESD/CLN $293 *ARU height and width adjustable with upholstered pads ARU $146 ARU/CLN $265 ARU/ESD/$188 ARU/ESD/CLN $307 While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Articulating Seat Control (ASC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently and lock into place with one lever. ASC/VUV $173 ASC/C1/C10 $176 BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/CLN $114 PSAS/ESD $114 PSAS/ESD/CLN $123 PSAU height adjustable with upholstered pads PSAU $101 PSAU/CLN $140 PSAU/ESD $140 PSAU/ESD/CLN $173 Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Footrings ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 FFAC/VUV $173 SLD Seat slider bracket allows seat depth adjustment range of up to 2.5 with locking positions every 0.5. Add to the standard task control, the FFAC or EXE control. Available only on N or P base with maximum seat height of 26 or less. Not recommended on clean room models. SLD $93 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price VU upholstered underwrap in the same upholstery as the seat $29 *FM Memory Foam $33 *Available on A or E seat only *Not available on C10 or C1 Need a Quick Quote? Go > > Get-a-Quote

31 AM Series heavy-duty chairs are ideal for individuals who like the comfort and support of an especially large backrest surface. These chairs offer the sculptured (saddleshaped) seat and other ergonomic features of AE Series models plus an even larger ergonomic backrest for lower and upper back support. The large backrest, comfortable seat, easy chair adjustability and special upholstery edge protection make AM Series chairs a great selection for the workplace. AM Series AM Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 18" wide x 19" high, lumbar support, plastic protective panel. Seat: saddle-shaped, contoured, 21" wide x 19" deep x 3" thick with waterfall front, and internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the AMN and AMP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many vinyl and fabric upholstery choices are available to meet your needs. 31 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control/ ESD performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

32 32AM Series Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread AMT Seat-Height Tubular Price * s. K(GR A). K(GR B). K(GR C) K. VUV. VUV-K. upcharge to Gr. 2 AMT1722 AMT1722R $600 AMT1924R AMT1926 AMT1926R AMT2126 AMT2128R AMT2328R AMT2530 AMT2732R $141 $191 $225 $153 $203 $262 $330 Gr.2 Gr.3 Gr.4 $571 $621 $653 $600 $600 $629 $577 $629 $606 $582 $612 $650 $650 $650 $680 $627 $680 $657 $633 $662 s. C10. F10. C10-K. N10 $682 $682 $682 $711 $659 $711 $688 $664 $693 $382 $309 $450 $381. C1 $411. C1-K $479. F10-K $377 AMC Seat-Height Cast Aluminum Price * AMC1722 AMC1722R $611 AMC1924R AMC1926 AMC1926R AMC2126 AMC2128R AMC2232 AMC2232R AMC2328R AMC2328 AMC2530R AMC2631 Gr.2 Gr.3 Gr.4 $581 $632 $663 $611 $611 $640 $583 $640 $623 $653 $613 $586 $616 $588 $661 $661 $661 $690 $634 $690 $674 $703 $663 $637 $666 $639 $692 $692 $692 $722 $665 $722 $705 $734 $695 $668 $698 $670 s s Base C: 5-legged cast aluminum, 23 leg spread. K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K $252. F10-K $300. Upcharge to Gr. 2 * Unit standard with casters Not available with casters

33 AMN Seat-Height Reinforced Nylon Price * AMN1722 AMN1722R $595 AMN1924R AMN1926 AMN1926R AMN2126 AMN2128R AMN2232 AMN2232R AMN2328R AMN2328 AMN2530R AMN2631 Gr.2 Gr.3 Gr.4 $565 $616 $647 $595 $595 $624 $567 $624 $607 $637 $597 $571 $600 $573 $645 $645 $645 $675 $618 $675 $658 $687 $647 $621 $650 $623 $677 $677 $677 $706 $649 $706 $689 $719 $679 $653 $682 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use AMP Seat-Height Polished Aluminum Price * AMP1722 AMP1722R $666 AMP1924R AMP1926 AMP1926R AMP2126 AMP2128R AMP2232 AMP2232R AMP2328R AMP2328 AMP2530R AMP2631 Gr.2 Gr.3 Gr.4 $637 $687 $719 $666 $666 $696 $639 $696 $679 $708 $668 $642 $671 $644 $717 $717 $717 $746 $689 $746 $729 $759 $719 $692 $722 $695 $748 $748 $748 $777 $721 $777 $761 $790 $750 $724 $753 $726 s s Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster). K(GR A). K(GR B). K(GR C) K. VUV $96 $128 $153 $96 $159 $184. C10. F10. C10-K. N10 $320 $231 $388 $319. C1 $349. C1-K $417. VUV-K $252. F10-K $300. Upcharge to Gr. 2 All specifications are nominal.

34 AM Series s Finish Casters and Glides 34 We offer a number of high-tech performance packages on most of our upholstered chairs static control/esd, clean room Class 1, Class 1Max (loaded with ergonomic features), Class 10, Class 100 and Class 1000, and all of these clean room packages in combination with static control/esd features. For more information on clean room and static control/ ESD packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests *ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/CLN $238 ARS/ESD/$174 ARS/ESD/CLN $293 *ARU height and width adjustable with upholstered pads ARU $146 ARU/CLN $265 ARU/ESD/$188 ARU/ESD/CLN $307 While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Articulating Seat Control (ASC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently and lock into place with one lever. ASC/VUV $173 ASC/C1/C10 $176 BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/CLN $114 PSAS/ESD $114 PSAS/ESD/CLN $123 PSAU height adjustable with upholstered pads PSAU $101 PSAU/CLN $140 PSAU/ESD $140 PSAU/ESD/CLN $173 Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Footrings ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 FFAC/VUV $173 SLD Seat slider bracket allows seat depth adjustment range of up to 2.5 with locking positions every 0.5. Add to the standard task control, the FFAC or EXE control. Available only on N or P base with maximum seat height of 26 or less. Not recommended on clean room models. SLD $93 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price VU upholstered underwrap in the same upholstery as the seat $29 *FM Memory Foam $33 *Available on A or E seat only *Not available on C10 or C1 Need a Quick Quote? Go > > Get-a-Quote

35 HL Series chairs feature sewn seams on the seats and backrests for fuller lines and enhanced form as well as added comfort. They feature a large ergonomic backrest with lumbar curve, a comfortable waterfallfront seat with four-way contouring. The HL Series chairs are suited for a variety of environments including healthcare, educational, industrial and office and static control areas (with performance package added). HL Series HL Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 15.5" wide x 14.5" high, lumbar support, sewn seams, plastic protective panel. Seat: ergonomic, 18.5" wide x 17" deep x 3" thick with sewn seams, waterfall front, and internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the HLN and HLP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many fabric upholstery choices are available to meet your needs. 35 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

36 36HL Series HLT Seat-Height Tubular Price * HLT1722 HLT1722R $564 HLT1924R HLT1926 HLT1926R HLT2126 HLT2128R HLT2328R HLT2530 HLT2732R HLT2934 s. K(GR C) $225. upcharge to Gr. 2 Gr.2 $535 $585 $564 $564 $594 $541 $594 $571 $546 $576 Gr.3 $615 $615 $615 $644 $592 $644 $621 $597 $626 Gr.4 $617 $646 $646 $646 $676 $623 $676 $653 $628 $658 $553 $603 $635 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread HLC Seat-Height Cast Aluminum Price * * HLC1722 HLC1722R $575 HLC1924R HLC1926 HLC1926R HLC2126 HLC2128R HLC2232 HLC2232R HLC2328R HLC2328 HLC2530R HLC2631 HLC2833R Gr.2 $545 $596 $575 $575 $604 $548 $604 $587 $617 $577 $551 Gr.3 $625 $625 $625 $655 $598 $655 $638 $667 $627 $601 $580 $630 Gr.4 $627 $657 $657 $657 $686 $629 $686 $669 $699 $659 $633 $662 $553 $603 $635 $582 $633 $664 Base C: 5-legged cast aluminum, 23 leg spread s. K(GR C) $153. Upcharge to Gr. 2 * Unit standard with casters Not available with casters

37 HLN Seat-Height Reinforced Nylon Price * * HLN1722 HLN1722R $559 HLN1924R HLN1926 HLN1926R HLN2126 HLN2128R HLN2232 HLN2232R HLN2328R HLN2328 HLN2530R HLN2631 HLN2833R Gr.2 Gr.3 Gr.4 $530 $580 $612 $559 $559 $588 $532 $588 $572 $601 $561 $535 $609 $609 $609 $639 $582 $639 $622 $651 $612 $585 $641 $641 $641 $670 $614 $670 $654 $683 $643 $617 $564 $615 $646 $537 $587 $619 $566 $617 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use HLP Seat-Height Polished Aluminum Price * HLP1722 HLP1722R $630 HLP1924R HLP1926 HLP1926R HLP2126 HLP2128R HLP2232 HLP2232R HLP2328R HLP2328 Gr.2 Gr.3 Gr.4 $601 $651 $683 $630 $630 $660 $603 $660 $643 $672 $633 $606 $681 $681 $681 $710 $654 $710 $693 $723 $683 $657 $712 $712 $712 $742 $685 $742 $725 $754 $714 $688 HLP2530R $636 $686 $718 HLP2631 $608 $659 $ * HLP2833R $638 $688 $720 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K(GR C) $153. Upcharge to Gr. 2 All specifications are nominal.

38 HL Series 38 s We offer these chairs with a static control/esd performance package if they have a tubular (T), cast aluminum (C) or polished aluminum (P) base. For more information on the performance package, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/ESD/$174 ARU height and width adjustable with upholstered pads ARU $146 ARU/ESD/$188 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/ESD $114 PSAU height adjustable with upholstered pads PSAU $101 PSAU/ESD $140 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Footrings NGC nylon glide covers for standard glides $11 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 NSG nonskid glides $21 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 FM (Memory Foam) $60 Need a Quick Quote? Go > > Get-a-Quote

39 FC Series chairs feature sewn seams on the seats and backrests for fuller lines and enhanced form as well as added comfort. These chairs are ideal for individuals who like the comfort and support of an especially large backrest surface. They offer the sculptured (saddle-shaped) seat and other ergonomic features such as lumbar support in the backrest and a waterfall-front seat. The FC Series chairs are suited for a variety of environments including healthcare, educational, industrial and office and static control areas (with performance package added). FC Series FC Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 18" wide x 19" high, lumbar support, sewn seams, plastic protective panel. Seat: saddle-shaped, contoured, 21" wide x 19" deep x 3" thick with sewn seams, waterfall front, and internal seat board bumperguard. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment. Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the FCN and FCP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many fabric upholstery choices are available to meet your needs. 39 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

40 FC Series FCT Seat-Height Tubular Price * FCT1722 FCT1722R $665 FCT1924R FCT1926 FCT1926R FCT2126 FCT2128R FCT2328R FCT2530 FCT2732R Gr.2 $665 $665 $695 $642 $695 $671 $647 $677 Gr.3 $636 $686 $716 $716 $716 $745 $692 $745 $722 $698 $727 Gr.4 $718 $747 $747 $747 $776 $724 $776 $753 $729 $759 s. K(GR C) $225. upcharge to Gr Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread FCC Seat-Height Cast Aluminum Price * FCC1722 Gr.2 FCC1722R $676 FCC1924R FCC1926 FCC1926R FCC2126 FCC2128R FCC2232 FC2232R FCC2328R FCC2328 FCC2530R FCC2631 $646 $697 $676 $676 $705 $648 $705 $688 $718 $678 $651 Gr.3 $726 $726 $726 $755 $699 $755 $739 $768 $728 $702 $681 $731 Gr.4 $728 $758 $758 $758 $787 $730 $787 $770 $800 $760 $733 $763 $654 $704 $735 Base C: 5-legged cast aluminum, 23 leg spread s. K(GR C) $153. Upcharge to Gr. 2 * Unit standard with casters Not available with casters

41 FCN Seat-Height Reinforced Nylon Price * FCN1722 FCN1722R $660 FCN1924R FCN1926 FCN1926R FCN2126 FCN2128R FCN2232 FCN2232R FCN2328R FCN2328 FCN2530R FCN2631 Gr.2 Gr.3 Gr.4 $630 $681 $712 $660 $660 $689 $633 $689 $672 $702 $662 $636 $665 $638 $710 $710 $710 $740 $683 $740 $723 $752 $712 $686 $716 $688 $742 $742 $742 $771 $714 $771 $754 $784 $744 $718 $747 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use FCP Seat-Height Polished Aluminum Price * FCP1722 FCP1722R $731 FCP1924R FCP1926 FCP1926R FCP2126 FCP2128R FCP2232 FCP2232R FCP2328R FCP2328 FCP2530R FCP2631 Gr.2 Gr.3 Gr.4 $702 $752 $784 $731 $731 $761 $704 $761 $744 $773 $733 $707 $737 $709 $782 $782 $782 $811 $754 $811 $794 $824 $784 $758 $787 $760 $813 $813 $813 $843 $786 $843 $826 $855 $815 $789 $818 $791 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K(GR C) $153. Upcharge to Gr. 2 All specifications are nominal.

42 FC Series 42 s We offer these chairs with a static control/esd performance package if they have a tubular (T), cast aluminum (C) or polished aluminum (P) base. For more information on the performance package, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/ESD/$174 ARU height and width adjustable with upholstered pads ARU $146 ARU/ESD/$188 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/ESD $114 PSAU height adjustable with upholstered pads PSAU $101 PSAU/ESD $140 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Footrings ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 SLD Seat slider bracket allows seat depth adjustment range of up to 2.5 with locking positions every 0.5. Add to the standard task control, the FFAC or EXE control. Available only on N or P base with maximum seat height of 26 or less. SLD $93 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 FM (Memory Foam) $60 Need a Quick Quote? Go > > Get-a-Quote

43 HC Series chairs with sewn seams for increased comfort offer the ergonomic support needed for healthcare, educational, industrial and office and static control areas (with performance package added). These chairs feature a larger ergonomic backrest with lumbar support and a waterfall-front seat. The sewn seams add a noticeable increase in the level of user comfort and support. HC Series HC Standard Features Backrest: 18" wide x 19" high, lumbar support, sewn seams, plastic protective panel. Seat: ergonomic, 18.5" wide x 17" deep x 3" thick with sewn seams, waterfall front, and internal seat board bumperguard Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the HCN and HCP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many fabric upholstery choices are available to meet your needs. 13-Year, Sure-Seat Warranty - see page 3 for details. 43 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

44 HC Series HCT Seat-Height Tubular Price * HCT1722 HCT1722R $619 HCT1924R HCT1926 HCT1926R HCT2126 HCT2128R HCT2328R HCT2530 HCT2732R Gr.2 $590 $640 $619 $619 $648 $596 $648 $625 $601 $630 Gr.3 $669 $669 $669 $699 $646 $699 $676 $651 $681 Gr.4 $671 $701 $701 $701 $730 $678 $730 $707 $683 $712 s. K(GR C) $225. upcharge to Gr Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread HCC Seat-Height Cast Aluminum Price * HCC1722 HCC1722R $629 HCC1924R HCC1926 HCC1926R HCC2126 HCC2128R HCC2232 HCC2232R HCC2328R HCC2328 HCC2530R HCC2631 Gr.2 $600 $650 $629 $629 $659 $602 $659 $642 $671 $632 $605 Gr.3 $680 $680 $680 $709 $653 $709 $692 $722 $682 $656 $635 $685 Gr.4 $682 $711 $711 $711 $741 $684 $741 $724 $753 $713 $687 $717 $607 $658 $689 s. K(GR C) $153 Base C: 5-legged cast aluminum, 23 leg spread. Upcharge to Gr. 2 * Unit standard with casters Not available with casters

45 HCN Seat-Height Reinforced Nylon Price * HCN1722 HCN1722R $614 HCN1924R HCN1926 HCN1926R HCN2126 HCN2128R HCN2232 HCN2232R HCN2328R HCN2328 HCN2530R HCN2631 Gr.2 Gr.3 Gr.4 $584 $635 $666 $614 $614 $643 $586 $643 $626 $656 $616 $590 $619 $592 $664 $664 $664 $693 $637 $693 $677 $706 $666 $640 $669 $642 $696 $696 $696 $725 $668 $725 $708 $738 $698 $671 $701 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use HCP Seat-Height Polished Aluminum Price * HCP1722 HCP1722R $685 HCP1924R HCP1926 HCP1926R HCP2126 HCP2128R HCP2232 HCP2232R HCP2328R HCP2328 HCP2530R HCP2631 Gr.2 Gr.3 Gr.4 $656 $706 $738 $685 $685 $714 $658 $714 $698 $727 $687 $661 $690 $663 $735 $735 $735 $765 $708 $765 $748 $777 $738 $711 $741 $713 $767 $767 $767 $796 $740 $796 $780 $809 $769 $743 $772 $745 s. K(GR C) $153 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster). Upcharge to Gr. 2 All specifications are nominal.

46 HC Series 46 s We offer these chairs with a static control/esd performance package if they have a tubular (T), cast aluminum (C) or polished aluminum (P) base. For more information on the performance package, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/ESD/$174 ARU height and width adjustable with upholstered pads ARU $146 ARU/ESD/$188 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/ESD $114 PSAU height adjustable with upholstered pads PSAU $101 PSAU/ESD $140 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Footrings NGC nylon glide covers for standard glides $11 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 NSG nonskid glides $21 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 FM (Memory Foam) $60 Need a Quick Quote? Go > > Get-a-Quote

47 Using seams allows us to minimize compression of pre-contoured foam seat and backrest cushioning during the manufacturing process. The unencumbered expansion of the foam helps the FL Series remain more comfortable over the long term. With the saddle-shaped seat with waterfall-front edge and lumbar curve in the backrest, these chairs are equipped for an array of applications including healthcare, educational, industrial and office and static control areas (with performance package added). FL Series FL Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 15.5" wide x 14.5" high, lumbar support, sewn seams, plastic protective panel Seat: saddle-shaped, contoured, 21" wide x 19" deep x 3" thick with sewn seams, waterfall front, and internal seat board bumperguard Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the FLN and FLP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many fabric upholstery choices are available to meet your needs. 47 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

48 48FL Series FLT Seat-Height Tubular Price * s. K(GR C) $225. upcharge to Gr. 2 FLT1722 FLT1722R $611 FLT1924R FLT1926 FLT1926R FLT2126 FLT2128R FLT2328R FLT2530 FLT2732R FLT2934 Gr.2 $581 $632 $611 $611 $640 $587 $640 $617 $593 $622 Gr.3 $661 $661 $661 $690 $638 $690 $667 $643 $672 Gr.4 $663 $692 $692 $692 $722 $669 $722 $699 $675 $704 $599 $649 $681 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread FLC Seat-Height Cast Aluminum Price * * FLC1722 FLC1722R $621 FLC1924R FLC1926 FLC1926R FLC2126 FLC2128R FLC2232 FLC2232R FLC2328R FLC2328 FLC2530R FLC2631 FLC2833R Gr.2 $592 $642 $621 $621 $650 $594 $650 $634 $663 $623 $597 Gr.3 $671 $671 $671 $701 $644 $701 $684 $713 $674 $647 $626 $677 Gr.4 $674 $703 $703 $703 $732 $676 $732 $716 $745 $705 $679 $708 $599 $649 $681 $628 $679 $710 Base C: 5-legged cast aluminum, 23 leg spread s. K(GR C) $153. Upcharge to Gr. 2 * Unit standard with casters Not available with casters

49 FLN Seat-Height Reinforced Nylon Price * * FLN1722 FLN1722R $605 FLN1924R FLN1926 FLN1926R FLN2126 FLN2128R FLN2232 FLN2232R FLN2328R FLN2328 FLN2530R FLN2631 FLN2833R Gr.2 Gr.3 Gr.4 $576 $626 $658 $605 $605 $635 $578 $635 $618 $647 $607 $581 $656 $656 $656 $685 $628 $685 $668 $698 $658 $632 $687 $687 $687 $717 $660 $717 $700 $729 $689 $663 $611 $661 $692 $583 $634 $665 $613 $663 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use FLP Seat-Height Polished Aluminum Price * FLP1722 FLP1722R $677 FLP1924R FLP1926 FLP1926R FLP2126 FLP2128R FLP2232 FLP2232R FLP2328R FLP2328 Gr.2 Gr.3 Gr.4 $647 $698 $729 $677 $677 $706 $649 $706 $689 $719 $679 $653 $727 $727 $727 $756 $700 $756 $740 $769 $729 $703 $759 $759 $759 $788 $731 $788 $771 $801 $761 $734 FLP2530R $682 $732 $764 FLP2631 $655 $705 $ * FLP2833R $684 $734 $766 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K(GR C) $153. Upcharge to Gr. 2 All specifications are nominal.

50 FL Series 50 s We offer these chairs with a static control/esd performance package if they have a tubular (T), cast aluminum (C) or polished aluminum (P) base. For more information on the performance package, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/ESD/$174 ARU height and width adjustable with upholstered pads ARU $146 ARU/ESD/$188 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/ESD $114 PSAU height adjustable with upholstered pads PSAU $101 PSAU/ESD $140 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Footrings ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 SLD Seat slider bracket allows seat depth adjustment range of up to 2.5 with locking positions every 0.5. Add to the standard task control, the FFAC or EXE control. Available only on N or P base with maximum seat height of 26 or less. Not recommended on clean room models. SLD $93 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 FM (Memory Foam) $60 Need a Quick Quote? Go > > Get-a-Quote

51 Perfect for any area that needs a more professional look such as nurse s stations, charting areas, pharmacy and the ICU. Anywhere HL-VF Standard Features ergonomic comfort is needed these vacuum-formed chairs can serve a variety of functions for nurses, lab technicians and pharmacists. 13-Year, Sure-Seat Warranty - see page 3 for details. HL-VF Series Backrest: 15.5" wide x 14.5" high, lumbar support, plastic protective panel Seat: ergonomic, 18.5" wide x 17" deep x 3" thick with waterfall front, and internal seat board bumperguard Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the HLN-VF and HLP-VFSeries. Fire Retardant: meets California Technical Bulletin117. Upholstery: available in Slate Blue and Black. 51 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code, and choose options. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

52 HLT-VF Seat-Height Tubular Price HLT1722-VF Gr.2 $535 HLT1722R-VF $564 HLT1924R-VF $564 HLT1926-VF $564 HLT1926R-VF $594 HLT2126-VF $541 52HL-VF Series * HLT2128R-VF HLT2328R-VF HLT2530-VF HLT2732R-VF HLT2934-VF $594 $571 $546 $576 $553 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread HLC-VF Seat-Height Cast Aluminum Price Gr.2 HLC1722-VF $545 HLC1722R-VF $575 * * HLC1924R-VF HLC1926-VF HLC1926R-VF HLC2126-VF HLC2128R-VF HLC2232-VF HLC2232R-VF HLC2328R-VF HLC2328-VF HLC2530R-VF HLC2631-VF HLC2833R-VF $575 $575 $604 $548 $604 $587 $617 $577 $551 $580 $553 $582 Base C: 5-legged cast aluminum, 23 leg spread * Unit standard with casters Not available with casters

53 HLN-VF Seat-Height Reinforced Nylon Price Gr.2 HLN1722-VF $530 HLN1722R-VF $559 * * HLN1924R-VF HLN1926-VF HLN1926R-VF HLN2126-VF HLN2128R-VF HLN2232-VF HLN2232R-VF HLN2328R-VF HLN2328-VF HLN2530R-VF HLN2631-VF HLN2833R-VF $559 $559 $588 $532 $588 $572 $601 $561 $535 $564 $537 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use HLP-VF Seat-Height Polished Aluminum Price Gr.2 HLP1722-VF $601 HLP1722R-VF $630 * HLP1924R-VF HLP1926-VF HLP1926R-VF HLP2126-VF HLP2128R-VF HLP2232-VF HLP2232R-VF HLP2328R-VF HLP2328-VF $630 $630 $660 $603 $660 $643 $672 $633 $606 HLP2530R-VF $ HLP2631-VF $ * HLP2833R-VF $638 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) All specifications are nominal.

54 HL-VF Series 54 Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests Footrings ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/ESD/$174 ARU height and width adjustable with upholstered pads ARU $146 ARU/ESD/$188 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/ESD $114 PSAU height adjustable with upholstered pads PSAU $101 PSAU/ESD $140 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors XR dual-wheel carpet casters Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 Need a Quick Quote? Go > > Get-a-Quote

55 These highly ergonomic vacuumformed chairs can serve a variety of functions for physicians, medical directors, patient s admittance and FC-VF Standard Features reception areas. The larger backrest and seat on these units allow them to be great desk chairs as well as for use at taller work stations. 13-Year, Sure-Seat Warranty - see page 3 for details. FC-VF Series Backrest: 18" wide x 19" high, lumbar support, plastic protective panel Seat: saddle-shaped, contoured, 21" wide x 19" deep x 3" thick with waterfall front, and internal seat board bumperguard Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the FCN-VF and FCP-VF Series. Fire Retardant: meets California Technical Bulletin 117. Upholstery: available in Slate Blue and Black 55 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code, and choose options. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

56 FC-VF Series FCT-VF Seat-Height Tubular Price FCT1722-VF FCT1722R-VF $665 FCT1924R-VF FCT1926-VF FCT1926R-VF FCT2126-VF Gr.2 $636 $665 $665 $695 $ * FCT2128R-VF FCT2328R-VF FCT2530-VF FCT2732R-VF $695 $671 $647 $ Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread FCC-VF Seat-Height Cast Aluminum Price Gr.2 FCC1722-VF $646 FCC1722R-VF $676 * FCC1924R-VF FCC1926-VF FCC1926R-VF FCC2126-VF FCC2128R-VF FCC2232-VF FC2232R-VF FCC2328R-VF FCC2328-VF FCC2530R-VF FCC2631-VF $676 $676 $705 $648 $705 $688 $718 $678 $651 $681 $654 Base C: 5-legged cast aluminum, 23 leg spread * Unit standard with casters Not available with casters

57 FCN-VF Seat-Height Reinforced Nylon Price Gr.2 FCN1722-VF $630 FCN1722R-VF $660 * FCN1924R-VF FCN1926-VF FCN1926R-VF FCN2126-VF FCN2128R-VF FCN2232-VF FCN2232R-VF FCN2328R-VF FCN2328-VF FCN2530R-VF FCN2631-VF $660 $660 $689 $633 $689 $672 $702 $662 $636 $665 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use FCP-VF Seat-Height Polished Aluminum Price Gr.2 FCP1722-VF $702 FCP1722R-VF $731 * FCP1924R-VF FCP1926-VF FCP1926R-VF FCP2126-VF FCP2128R-VF FCP2232-VF FCP2232R-VF FCP2328R-VF FCP2328-VF FCP2530R-VF FCP2631-VF $731 $731 $761 $704 $761 $744 $773 $733 $707 $737 $709 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) All specifications are nominal.

58 FC-VF Series 58 Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests Footrings ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/ESD/$174 ARU height and width adjustable with upholstered pads ARU $146 ARU/ESD/$188 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/ESD $114 PSAU height adjustable with upholstered pads PSAU $101 PSAU/ESD $140 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 SLD Seat slider bracket allows seat depth adjustment range of up to 2.5 with locking positions every 0.5. Add to the standard task control, the FFAC or EXE control. Available only on N or P base with maximum seat height of 26 or less. SLD $93 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors XR dual-wheel carpet casters Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 Need a Quick Quote? Go > > Get-a-Quote

59 Physicians assistants, clinical directors and discharge planners alike will enjoy the comfort of these vacuum-formedchairs. HC-VF Standard Features The combination of the larger ergonomic backrest with the waterfall front seat make a great chair for use in any healthcare or laboratory setting. 13-Year, Sure-Seat Warranty - see page 3 for details. HC-VF Series Backrest: 18" wide x 19" high, lumbar support, plastic protective panel Seat: ergonomic, 18.5" wide x 17" deep x 3" thick with waterfall front, and internal seat board bumperguard Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the HC-VF Series. Fire Retardant: meets California Technical Bulletin 117. Upholstery: available in Slate Blue and Black 59 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code, and choose options. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

60 HCT-VF Seat-Height Tubular Price HCT1722-VF Gr.2 $590 HCT1722R-VF $619 HCT1924R-VF $619 HCT1926-VF $619 HCT1926R-VF $648 HCT2126-VF $596 60HC-VF Series * HCT2128R-VF HCT2328R-VF HCT2530-VF HCT2732R-VF $648 $625 $601 $630 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread HCC-VF Seat-Height Cast Aluminum Price Gr.2 HCC1722-VF $600 HCC1722R-VF $629 * HCC1924R-VF HCC1926-VF HCC1926R-VF HCC2126-VF HCC2128R-VF HCC2232-VF HCC2232R-VF HCC2328R-VF HCC2328-VF HCC2530R-VF HCC2631-VF $629 $629 $659 $602 $659 $642 $671 $632 $605 $635 $607 Base C: 5-legged cast aluminum, 23 leg spread * Unit standard with casters Not available with casters

61 HCN-VF Seat-Height Reinforced Nylon Price Gr.2 HCN1722-VF $584 HCN1722R-VF $614 * HCN1924R-VF HCN1926-VF HCN1926R-VF HCN2126-VF HCN2128R-VF HCN2232-VF HCN2232R-VF HCN2328R-VF HCN2328-VF HCN2530R-VF HCN2631-VF $614 $614 $643 $586 $643 $626 $656 $616 $590 $619 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use HCP-VF Seat-Height Polished Aluminum Price Gr.2 HCP1722-VF $656 HCP1722R-VF $685 * HCP1924R-VF HCP1926-VF HCP1926R-VF HCP2126-VF HCP2128R-VF HCP2232-VF HCP2232R-VF HCP2328R-VF HCP2328-VF HCP2530R-VF HCP2631-VF $685 $685 $714 $658 $714 $698 $727 $687 $661 $690 $663 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) All specifications are nominal.

62 HC-VF Series 62 Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests Footrings ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/ESD/$174 ARU height and width adjustable with upholstered pads ARU $146 ARU/ESD/$188 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/ESD $114 PSAU height adjustable with upholstered pads PSAU $101 PSAU/ESD $140 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors XR dual-wheel carpet casters Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 Need a Quick Quote? Go > > Get-a-Quote

63 For areas that require elbow room, the smaller backrest coupled with the larger ergonomic seat allows nurse midwives, anesthesiologists FL-VF Standard Features as well as many laboratory technicians to appreciate this chair. As with the other chairs in the Vacuum-Formed series, the comfort and ease of use can t be beat. 13-Year, Sure-Seat Warranty - see page 3 for details. FL-VF Series Backrest: 15.5" wide x 14.5" high, lumbar support, plastic protective panel Seat: saddle-shaped, contoured, 21" wide x 19" deep x 3" thick with waterfall front, and internal seat board bumperguard Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the FLN-VF and FLP-VF Series. Fire Retardant: meets California Technical Bulletin 117. Upholstery: available in Slate Blue and Black 63 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code, and choose options. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

64 FL-VF Series FLT-VF Seat-Height Tubular Price FLT1722-VF Gr.2 $581 FLT1722R-VF $611 FLT1924R-VF FLT1926-VF FLT1926R-VF FLT2126-VF $611 $611 $640 $ * FLT2128R-VF FLT2328R-VF FLT2530-VF FLT2732R-VF FLT2934-VF $640 $617 $593 $622 $ Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread FLC-VF Seat-Height Cast Aluminum Price Gr.2 FLC1722-VF $592 FLC1722R-VF $621 * * FLC1924R-VF FLC1926-VF FLC1926R-VF FLC2126-VF FLC2128R-VF FLC2232-VF FLC2232R-VF FLC2328R-VF FLC2328-VF FLC2530R-VF FLC2631-VF FLC2833R-VF $621 $621 $650 $594 $650 $634 $663 $623 $597 $626 $599 $628 Base C: 5-legged cast aluminum, 23 leg spread * Unit standard with casters Not available with casters

65 FLN-VF Seat-Height Reinforced Nylon Price Gr.2 FLN1722-VF $576 FLN1722R-VF $605 * * FLN1924R-VF FLN1926-VF FLN1926R-VF FLN2126-VF FLN2128R-VF FLN2232-VF FLN2232R-VF FLN2328R-VF FLN2328-VF FLN2530R-VF FLN2631-VF FLN2833R $605 $605 $635 $578 $635 $618 $647 $607 $581 $611 $583 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use FLP-VF Seat-Height Polished Aluminum Price Gr.2 FLP1722-VF $647 FLP1722R-VF $677 * FLP1924R-VF FLP1926-VF FLP1926R-VF FLP2126-VF FLP2128R-VF FLP2232-VF FLP2232R-VF FLP2328R-VF FLP2328-VF $677 $677 $706 $649 $706 $689 $719 $679 $653 FLP2530R-VF $ FLP2631-VF $ * FLP2833R-VF $684 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) All specifications are nominal.

66 FL-VF Series 66 Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests Footrings ARS height and width adjustable with self-skinned urethane pads ARS $119 ARS/ESD/$174 ARU height and width adjustable with upholstered pads ARU $146 ARU/ESD/$188 PSAS height adjustable with self-skinned urethane pads PSAS $75 PSAS/ESD $114 PSAU height adjustable with upholstered pads PSAU $101 PSAU/ESD $140 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Executive Tilt Control (EXE) pneumatic seat-height adjustment, backrest-height adjustment, backrest-tilt adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Available only on models with a maximum seat height of 26 or less. $126 Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 SLD Seat slider bracket allows seat depth adjustment range of up to 2.5 with locking positions every 0.5. Add to the standard task control, the FFAC or EXE control. Available only on N or P base with maximum seat height of 26 or less. SLD $93 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors XR dual-wheel carpet casters Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 Need a Quick Quote? Go > > Get-a-Quote

67 With a weight capacity rated up to 500 pounds, the Intensive Plus chair provides unconditional support, comfort, reliability, control and ergonomics. It is the perfect silent working partner for any environment where increased levels of comfort and durability are needed, 24/7. Intensive Plus Standard Features Backrest: generous, contoured, 20 wide x 23 high with lumbar and kidney support Seat: saddle-shaped, contoured with sewn seams, 21 wide x 19 deep x 3 thick with waterfall front Controls: Executive Seat Control with Seat Slider: Pneumatic seat height adjustment, backrest height adjustment, seat and backrest swivel/tilt in unison, tilt-tension control knob and single lever seat tilt lock in any position. Seat Slider allows seat depth adjustment range of up 2.5 with locking positions every 0.5. Casters and Glides: Model available with casters has IPR following the manufacturing code. The other model is standard with heavy duty glides. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many fabric upholstery choices are available to meet your needs. The sleek, large, saddle-shaped style seat has a waterfall front to allow for even weight distribution. Generous and contoured, the backrest is molded to provide lumbar and kidney support. 5-Year, Sure-Seat Warranty - see below for details. Intensive Plus Series 67 Ordering Products Contact BioFit to help you finalize your order. Warranty BioFit Intensive Plus seating products are warranted against mechanical or structural failure due to defective material, workmanship, or abnormal wear for 5 years. Pneumatic cylinders are covered for the functional lifetime of the chair. BioFit reserves the right to recondition or replace any units covered by this guarantee. Freight and any other consequential damages are not covered. All return shipments require written authorization and must be freight prepaid unless otherwise approved in writing. COM upholstery materials are not covered. BioFit takes its warranty, repair and maintenance responsibilities very seriously. Efforts by unqualified personnel to perform repairs on seating products can result in dangerous conditions which can lead to serious bodily injury. Any attempt to modify, alter or make unauthorized repairs to BioFit products may not only seriously jeopardize the safety of the user, but will void this warranty in every respect. Need a Quick Quote? Go > > Get-a-Quote

68 Intensive Plus Series Intensive Plus Seat-Height Polished Aluminum Price Gr.2 Gr.3 Gr *FSP2025-IP-IPR $1,418 $1,468 $1, FSP2025-IP $1,418 $1,468 $1,500 * Unit standard with casters Optional Armrests IRS Adjustable in width and height with self-skinned urethane arm pads $144 IRU Adjustable in width and height with upholstered arm pads $173 ISAS Adjustable in height only with self-skinned urethane arm pads $99 ISAU Adjustable in height only with upholstered arm pads $126 68

69 FCN1722RH-BL-EXE-PSAS HLN1722RH-BL-EXE-PSAS MMN1722RH-BL-EXE-PSAS Office Chairs Backrest: 18 wide x 19 high, lumbar support with sewn seams, plastic protective panel Seat: saddle-shaped, contoured, with sewn seams, 21 wide x 19 deep x 3 thick with waterfall front and internal seat board bumperguard Base: 5-legged, black reinforced composite, 27 leg spread (26 caster to caster) Seat-Height : Backrest: 15.5 wide x 14.5 high, lumbar support with sewn seams, plastic protective panel Seat: 18.5 wide x 17 deep x 3 thick with waterfall front, ergonomic, four way contoured seat with sewn seams and internal seat board bumperguard Base: 5-legged, black reinforced composite, 27 leg spread (26 caster to caster) Seat-Height : Backrest: 18 wide x 19 high, lumbar support, plastic protective panel Seat: ergonomic, 21 wide x 19 deep x 3 thick with waterfall front, four-way contouring and internal seat board bumperguard Base: 5-legged black reinforced composite, 27 leg spread (26 caster to caster) Seat-Height Adjustment Range: AVN1722RH-BL-EXE-PSAS ASN1722RH-BL-EXE-PSAS AEN1722RH-BL-EXE-PSAS Backrest: 20 wide x 30 high, contoured, molded to wrap around user s back and provide lumbar and kidney support, built-in headrest Seat: saddle-shaped, contoured, 21 wide x 19 deep x 3 thick with waterfall front and internal seat board bumperguard Base: 5-legged, black reinforced composite, 27 leg spread (26 caster to caster) Seat-Height : Overall Height: Backrest: 20 wide x 23 high, contoured, molded to hug user s back and provide lumbar and kidney support Seat: saddle-shaped, contoured, 21 wide x 19 deep x 3 thick with waterfall front and internal seat board bumperguard Base: 5-legged, black reinforced composite, 27 leg spread (26 caster to caster) Seat-Height : Overall Height: Backrest: 15.5 wide x 14.5 high, lumbar support, plastic protective panel Seat: saddle-shaped, contoured, 21 wide x 19 deep x 3 thick with waterfall front and internal seat board bumperguard Base: 5-legged, black reinforced composite, 27 leg spread (26 caster to caster) Seat-Height : Need a Quick Quote? Go > > Get-a-Quote

70 Office chairs Office Chairs Seat-Height Reinforced Nylon Price Gr.2 Gr.3 Gr.4 FCN1722RH-BL-EXE-PSAS HLN1722RH-BL-EXE-PSAS MMN1722RH-BL-EXE-PSAS AVN1722RH-BL-EXE-PSAS ASN1722RH-BL-EXE-PSAS AEN1722RH-BL-EXE-PSAS * * * * * * FCN1722RH-BL-EXE-PSAS HLN1722RH-BL-EXE-PSAS MMN1722RH-BL-EXE-PSAS AVN1722RH-BL-EXE-PSAS ASN1722RH-BL-EXE-PSAS AEN1722RH-BL-EXE-PSAS $867 $918 $949 $766 $791 $858 $818 $751 $814 $842 $909 $869 $802 $844 $873 $940 $900 $833 * Unit standard with RH casters Office Chair Options Casters and Glides Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Armrests ARS height and width adjustable with self-skinned urethane pads $44 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Fire Retardant XR dual-wheel carpet casters C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. 70 ARU height and width adjustable with upholstered pads $71 PSAU height adjustable with upholstered pads $25 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors Miscellaneous SW skid wrapping; net cost per pallet $23 *FM (Memory Foam) A seat $33 H or F seat $60 Executive Leather Chairs Standard Features TROC1-17-J PROC1-17-S QUOC1-17-K Upholstery: Black leather Controls: 360 o swivel, pneumatic seatheight adjustment, seat and back multi-tilt, adjustable tilt-tension, tilt-lock Base: 5 legged, high profile, black reinforced composite on TROC1 and QUOC1; PROC1 is wood capped Casters: designed for carpet use Metal Parts: black powder-coated finish No options are offered on the leather chairs. Backrest: 20 wide x 33 high Seat: 19.5 wide x 21 deep with extra thick cushioning Armrests: leather topped Seat-Height Adjustment Range: Overall Height: Backrest: 19 wide x 27 high Seat: 19.5 wide x 20 deep Armrests: wood topped with leather Wood Frame Finish: classic mahogany Seat-Height Adjustment Range: Overall Height: Backrest: 21 wide x 29 high Seat: 19.5 wide x 20 deep Armrests: leather topped Seat-Height Adjustment Range: Overall Height: Executive Leather Chairs Seat-Height * TROC1-17-J * PROC1-17-S * QUOC1-17-K Price $2,096 $1,699 $1,494 Need a Quick Quote? Go > > Get-a-Quote

71 With antimicrobial properties and UV inhibitors, the GG Series is the Jack of All Trades. The innovative design of these 100% polypropylene seats and backs allows us to offer them for almost any application including clean room and static control (with performance packages added). The ArmorSeat series is the ideal multi-purpose seating for schools, laboratories, manufacturing, colleges and universities as well as hospitals and clean rooms. GG Series GG Series GG Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 16" wide x 10.75" high, lumbar support, plastic protective panel, UV inhibitor and anti-microbial properties. Seat: ergonomic, 17.5" wide x 15.5" deep with waterfall front, UV inhibitor and anti-microbial properties. Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 6, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the GGT, GGC, GGN and GGP Series. 71 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

72 72GG Series GGT Seat-Height Tubular Price * * * * GGT1520 GGT1520R GGT1722R GGT1724 GGT1724R GGT1823 GGT1926R GGT2025R GGT2227 GGT2429R GGT2631 s. K $ $89. CR10 $158 $346 $375 $375 $375 $405 $352 $405 $382 $357 $387 $364 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread GGC Seat-Height * * * * * * Cast Aluminum Price GGC1520 $356 GGC1520R $386 GGC1722R $386 GGC1623 $386 GGC1623R $415 GGC1823 $359 GGC1825R $415 GGC1929 $398 GGC1929R $428 GGC2025R $388 GGC2025 $362 GGC2227R $391 GGC2328 $364 GGC2530R $393 Base C: 5-legged cast aluminum, 23 leg spread s. K $ $53. CR10 $124 * Unit standard with casters Not available with casters

73 GGN Seat-Height * * * * * * Reinforced Nylon Price GGN1520 $341 GGN1520R $370 GGN1722R $370 GGN1623 $370 GGN1623R $399 GGN1823 $343 GGN1825R $399 GGN1929 $383 GGN1929R $412 GGN2025R $372 GGN2025 $346 GGN2227R $375 GGN2328 $348 GGN2530R $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use GGP Seat-Height * * * * * * Polished Aluminum Price GGP1520 $412 GGP1520R $441 GGP1722R $441 GGP1623 $441 GGP1623R $471 GGP1823 $414 GGP1825R $471 GGP1929 $454 GGP1929R $483 GGP2025R $444 GGP2025 $417 GGP2227R $447 GGP2328 $419 GGP2530R $449 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K $ $53. CR10 $124 All specifications are nominal.

74 GG Series 74 s GG Series chairs are offered with clean room Class 1000,Class 10 and static control performance packages. For more information on performance packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/ manufacturing codes. Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example GGN1828). Chrome Finish on The NeuFlexMatic $70 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 6, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Footrings Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 Casters and Glides Miscellaneous BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 Need a Quick Quote? Go > > Get-a-Quote

75 Seats and backrests of molded, self-skinned urethane make these durable chairs great for harsh industrial settings and laboratories, or anyplace requiring frequent cleaning. The seat and backrest are easy to wash down and resist damage from water, lubricants, chemicals, inks, paints, coatings and resins. Ergonomic features and controls provide comfort and support for users. These chairs are available on our Ship Now! quick-ship program. UU Series UU Series UU Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Backrest: 16.5" wide x 12.5" high with.09375" ventilating ribs, self-skinned urethane with integral lumbar support Seat: self-skinned urethane,18.5" wide x 17" deep x1.5" thick with waterfall front, shaped rear edge and.09375" ventilating ribs Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/ manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a singlewheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the UUN and UUP Series. 75 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/ or static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

76 UU Series 4L/UUT Seat-Height Model # L * 4L57R * 4L41R L42 Tubular UUT1621 UUT1621R UUT1823R UUT1825 Price $420 $450 $450 $ * 4L58R UUT1825R $ L61 UUT1924 $ * 4L42-R UUT2027R $479 * 4L61-R UUT2126R $456 4L62 UUT2328 $432 4L62-R L63 UUT2530R UUT2732 $461 $438 s. K $ $ K $152 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 4M/UUC Seat-Height Cast Aluminum Model # M70 UUC * * * * M51-R 4M70-R 4M72 4M52-R 4M43 4M72-R 4M73 UUC1621R UUC1823R UUC1825 UUC1825R UUC1924 UUC2027R UUC * * 4M53-R 4M43-R 4M64 UUC2030R UUC2126R UUC M64-R 4M66 UUC2328R UUC * 4M66-R UUC2732R Price $431 $460 $460 $460 $490 $433 $490 $473 $502 $462 $436 $466 $438 $468 Base C: 5-legged cast aluminum, 23 leg spread s. K $ $ K $108 * Unit standard with casters Not available with casters All models are available on ShipNow except with a symbol

77 4M-CAB/UUN Seat-Height Reinforced Nylon Model # * * * * * * * 4M70-CAB 4M51-R-CAB 4M70-R-CAB 4M72-CAB 4M52-R-CAB 4M43-CAB 4M72-R-CAB 4M73-CAB 4M53-R-CAB 4M43-R-CAB 4M64-CAB 4M64-R-CAB 4M66-CAB 4M66-R-CAB UUN1621 UUN1621R UUN1823R UUN1825 UUN1825R UUN1924 UUN2027R UUN2030 UUN2030R UUN2126R UUN2126 UUN2328R UUN2530 UUN2732R Price $415 $445 $445 $445 $474 $417 $474 $457 $487 $447 $420 $450 $423 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 4M-PAL/UUP Seat-Height Polished Aluminum Model # * * * * M70-PAL 4M51-R-PAL 4M70-R-PAL 4M72-PAL 4M52-R-PAL 4M43-PAL 4M72-R-PAL 4M73-PAL UUP1621 UUP1621R UUP1823R UUP1825 UUP1825R UUP1924 UUP2027R UUP * * 4M53-R-PAL 4M43-R-PAL 4M64-PAL UUP2030R UUP2126R UUP2126 4M64-R-PAL UUP2328R M66-PAL UUP * 4M66-R-PAL UUP2732R Price $487 $516 $516 $516 $545 $489 $545 $529 $558 $518 $492 $521 $494 $523 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K $ $ K $108 All specifications are nominal.

78 UU Series 78 s UU Series chairs are offered with clean room Class 1000 and/ or static control performance packages. For more information on performance packages, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/ manufacturing codes. Finish = Ship Now Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example UUN1929). Chrome Finish on The NeuFlexMatic $70 While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Footrings Miscellaneous ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 Armrests ARS height and width adjustable with self-skinned urethane pads ARS $194 ARS/CLN $313 ARS/ESD/$249 ARS/ESD/CLN $368 Seat Controls Task Control is standard. It includes Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. Other extra-cost choices include: Free Float Articulating Control (FFAC) pneumatic seat-height adjustment, backrest-height adjustment. Seat and backrest tilt independently with separate levers and can free-float or lock into place. FFAC $84 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

79 KX Series chairs are a great costeffective seating option for schools, laboratories and clean rooms (with performance package added). The one-piece ergonomic shell is molded of super high-density polypropylene and features a waterfall-front seat. You don t have to shell out a lot to feel the comfort! KX Series KX Series KX Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Seat/Backrest: 18" wide x 17" deep x 18.5" high, one-piece, high-density polypropylene plastic shell Controls: Soft Touch pneumatic seat-height adjustment Metal parts: black powder-coated finish.* A chromeplated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/ manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a singlewheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the KXC, KXN and KXP Series. Seat/Backrest Colors: Several color choices are available to meet your needs. 79 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

80 KX Series KXT Seat-Height Tubular KXT * KXT1621R * KXT1823R KXT * KXT1825R KXT2025 Price $296 $325 $325 $325 $354 $ * * * KXT2027R KXT2227R KXT2429 KXT2631R KXT2833 $354 $331 $307 $336 $313 s VUV $ Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread KXC Seat-Height Cast Aluminum KXC1621 Price $ * * * * * * KXC1621R KXC1823R KXC1825 KXC1825R KXC2025 KXC2027R KXC2131 KXC2131R KXC2227R $335 $335 $335 $365 $308 $365 $348 $377 $ KXC * KXC2429R KXC2530 $311 $341 $313 s VUV $72 Base C: 5-legged cast aluminum, 23 leg spread * Unit standard with casters Not available with casters

81 KXN Seat-Height Reinforced Nylon Model # Price KXN1722 KXN1722R KXN1924R KXN1926 KXN1926R KXN2025 KXN2128R KXN2232 $290 $320 $320 $320 $349 $292 $349 $332 * * KXN2232R KXN2227R KXN2227 $362 $322 $ * KXN2429R $ KXN2631 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) KXP Seat-Height * * Polished Aluminum KXP1722 KXP1722R KXP1924R KXP1926 KXP1926R KXP2025 KXP2128R KXP2232 KXP2232R KXP2227R Price $362 $391 $391 $391 $420 $364 $420 $404 $433 $ KXP2227 $ * KXP2429R $ KXP2631 $369 s VUV $72 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) All specifications are nominal.

82 KX Series s We offer KX Series chairs with a clean room Class 100 performance package. For more information on the clean TM room package, contact BioFit for a Microtech catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to example KXN2030). Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors $23 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 Footrings Miscellaneous ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 SW skid wrapping; net cost per pallet $23 82 Chrome Finish on The NeuFlexMatic $70 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 C Chrome-plated finish on metal parts resists scratching and scuffing. T base $72 C,N,P base $36 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

83 Durability combines with costeffectiveness in the WW Series of chairs for basic seating in manufacturing, schools and laboratories. The seat and backrest are made of tough maple plywood. The seat has a waterfall front and is height-adjustable for added comfort. WW Series WW Series WW Standard Features Backrest: 14.5" wide x 8.75" high x.25" thick, 5-ply maple plywood Seat: 16.5" wide x 15.25" deep x.50" thick, 7-ply maple plywood with waterfall front Controls: Task Control Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is offered as an added-cost option. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the WWN and WWP Series. 13-Year, Sure-Seat Warranty - see page 3 for details. 83 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

84 4E/WWT Seat-Height Tubular Price Model # E41 WWT1520 $ * 4E57-R WWT1520R $461 4E41-R WWT1722R $ E42 WWT1724 $461 84WW Series * * 4E58-R 4E61 4E42-R 4E61-R WWT1724R WWT1823 WWT1926R WWT2025R $491 $438 $491 $ E62 WWT2227 $ * 4E62-R WWT2429R $ E63 WWT2631 $450 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 4F/WWC Seat-Height Model # Cast Aluminum Price F70 WWC1520 $ * 4F51-R WWC1520R $472 4F70-R WWC1722R $ F72 WWC1623 $ * 4F52-R WWC1623R $ F43 WWC1823 $ * 4F72-R WWC1825R $ F73 WWC1929 $ * 4F53-R WWC1929R $ * 4F43-R WWC2025R $ F64 WWC2025 $ * 4F64-R WWC2227R $477 4F66 WWC2328 $450 4F66-R WWC2530R $479 Base C: 5-legged cast aluminum, 23 leg spread * Unit standard with casters Not available with casters

85 4F-CAB/WWN Seat-Height Reinforced Nylon Model # F70-CAB WWN1520 Price $ * 4F51-R-CAB WWN1520R $456 4F70-R-CAB WWN1722R $ F72-CAB WWN1623 $ * 4F52-R-CAB WWN1623R $ F43-CAB WWN1823 $ * 4F72-R-CAB WWN1825R $ F73-CAB WWN1929 $ * 4F53-R-CAB WWN1929R $ * 4F43-R-CAB WWN2025R $ F64-CAB WWN2025 $ * 4F64-R-CAB WWN2227R $461 4F66-CAB WWN2328 $434 4F66-R-CAB WWN2530R $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 4F-PAL/WWP Seat-Height Polished Aluminum Model # Price F70-PAL WWP1520 $ * 4F51-R-PAL WWP1520R $528 4F70-R-PAL WWP1722R $ F72-PAL WWP1623 $ * 4F52-R-PAL WWP1623R $ F43-PAL WWP1823 $ * 4F72-R-PAL WWP1825R $ F73-PAL WWP1929 $ * 4F53-R-PAL WWP1929R $ * 4F43-R-PAL WWP2025R $ F64-PAL WWP2025 $ * 4F64-R-PAL WWP2227R $533 4F66-PAL WWP2328 $506 4F66-R-PAL WWP2530R $535 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) All specifications are nominal.

86 WW Series 86 s There are no performance packages offered on WW series chairs. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example WWN1828). Chrome Finish on The NeuFlexMatic $70 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating or matching a specific paint finish is available as an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 Footrings Miscellaneous ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

87 The RX Series upholstered stools are built for comfort, durability and easy adjustability in plants, schools, laboratories, health care and static control/esd applications (with performance package added). Users will appreciate the supportive foam of the upholstered seat and the under-the-seat control for easy adjustment of seat height. RX Series RX Series RX Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Seat: round, 16" diameter, upholstered with 4" of highresilience molded foam cushioning, internal seat board bumperguard Controls: Soft Touch pneumatic seat-height adjustment Metal parts: black powder-coated finish.* A chromeplated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the RXN, RXP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. Upholstery: Many vinyl and fabric upholstery choices are available to meet your needs. 87 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

88 88RX Series 1L/RXT Seat-Height Tubular Price Model # 1L * L57-R 1L41-R 1L42 1L58-R 1L61 1L42-R 1L61-R 1L62 1L62-R 1L63 s. K (GR A) $141. K (GR B) $191. K (GR C) $225 RXT1722 RXT1722R $338 RXT1924R RXT1926 RXT1926R RXT2126 RXT2128R RXT2328R RXT2530 RXT2732R RXT2934 Gr.2 Gr.3 Gr.4 $308 $333 $349 $338 $338 $367 $314 $367 $344 $320 $349 $326 $363 $363 $363 $392 $340 $392 $369 $345 $373 $351 $378 $378 $378 $408 $355 $408 $385 $361 $390 $367. upcharge to Gr. 2 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 1M/RXC Seat-Height Cast Aluminum Price Model # 1M70 * * 1M51-R 1M70-R 1M72 1M52-R 1M43 1M72-R 1M73 1M53-R 1M43-R 1M64 1M64-R 1M66 1M66-R RXC1722 RXC1722R $348 RXC1924R RXC1926 RXC1926R RXC2126 RXC2128R RXC2232 RXC2232R RXC2328R RXC2328 RXC2530R RXC2631 RXC2833R Gr.2 Gr.3 Gr.4 $319 $344 $360 $348 $348 $377 $321 $377 $361 $390 $350 $324 $353 $326 $355 $373 $373 $373 $403 $346 $403 $386 $415 $375 $349 $378 $351 $381 $389 $389 $389 $418 $362 $418 $402 $431 $391 $365 $394 $367 $396 Base C: 5-legged cast aluminum, 23 leg spread s. K (GR A). K (GR B) $96 $128. K (GR C) $153. upcharge to Gr. 2 * Unit standard with casters Not available with casters

89 1M-CAB/RXN Seat-Height Reinforced Nylon Price Model # 1M70-CAB * M51-R-CAB 1M70-R-CAB 1M72-CAB 1M52-R-CAB 1M43-CAB 1M72-R-CAB 1M73-CAB 1M53-R-CAB 1M43-R-CAB 1M64-CAB 1M64-R-CAB 1M66-CAB RXN1722 RXN1722R $332 RXN1924R RXN1926 RXN1926R RXN2126 RXN2128R RXN2232 RXN2232R RXN2328R RXN2328 RXN2530R RXN2631 Gr.2 Gr.3 Gr.4 $303 $328 $344 $332 $332 $362 $305 $362 $345 $374 $334 $308 $338 $310 $357 $357 $357 $387 $330 $387 $370 $399 $360 $333 $363 $335 $373 $373 $373 $403 $346 $403 $386 $415 $375 $349 $378 $ * 1M66-R-CAB RXN2833R $340 $365 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 1M-PAL/RXP Seat-Height Polished Aluminim Price * * Model # 1M70-PAL 1M51-R-PAL 1M70-R-PAL 1M72-PAL 1M52-R-PAL 1M43-PAL 1M72-R-PAL 1M73-PAL 1M53-R-PAL 1M43-R-PAL 1M64-PAL 1M64-R-PAL 1M66-PAL 1M66-R-PAL Gr.2 Gr.3 Gr.4 RXP1722 $374 $399 $415 RXP1722R RXP1924R RXP1926 RXP1926R RXP2126 RXP2128R RXP2232 RXP2232R RXP2328R RXP2328 RXP2530R RXP2631 RXP2833R $404 $404 $404 $433 $376 $433 $416 $446 $406 $380 $409 $382 $411 $429 $429 $429 $458 $402 $458 $441 $471 $431 $405 $434 $407 $436 $445 $445 $445 $474 $417 $474 $457 $487 $447 $420 $450 $423 $452 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K (GR A). K (GR B) $96 $128. K (GR C) $153. upcharge to Gr. 2 All specifications are nominal.

90 RX Series s Casters and Glides Footrings We offer these stools with a static control/esd performance package if they have a tubular (T), cast aluminum (C) or polished aluminum (P) base. For more information on the performance package, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/ manufacturing codes. BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 90 Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example RXN2030). Chrome Finish on The NeuFlexMatic $70 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price C Chrome-plated finish on metal parts resists scratching and scuffing. T base $72 C,N,P base $36 NGC nylon glide covers for standard glides $11 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. NSG nonskid glides $21 Seat VU - upholstered underwrap in the same upholstery as the seat $29 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

91 These vacuum-formed stools have been especially selected for use by nurses and doctors in exam rooms, surgical suites and in recovery. RX-VF Standard Features When space is at a premium, these stools fit well in almost any workstation. 13-Year, Sure-Seat Warranty - see page 3 for details. RX-VF Series Seat: round, 16" diameter, upholstered with 4" of highresilience molded foam cushioning, internal seat board bumperguard Controls: Soft Touch pneumatic seat-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the RX-VF Series. Fire Retardant: meets California Technical Bulletin 117. Upholstery: available in Slate Blue and Black 91 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note manufacturing code. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

92 92RX-VF Series RXT-VF Seat-Height Tubular Price * RXT1722-VF RXT1722R-VF RXT1924R-VF RXT1926-VF RXT1926R-VF RXT2126-VF RXT2128R-VF RXT2328R-VF RXT2530-VF RXT2732R-VF RXT2934-VF Gr.2 $308 $338 $338 $338 $367 $314 $367 $344 $320 $349 $326 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread RXC-VF Seat-Height Cast Aluminum Price * * RXC1722-VF Gr.2 $319 RXC1722R-VF $348 RXC1924R-VF RXC1926-VF RXC1926R-VF RXC2126-VF RXC2128R-VF RXC2232-VF RXC2232R-VF RXC2328R-VF RXC2328-VF RXC2530R-VF RXC2631-VF RXC2833R-VF $348 $348 $377 $321 $377 $361 $390 $350 $324 $353 $326 $355 Base C: 5-legged cast aluminum, 23 leg spread * Unit standard with casters Not available with casters

93 RXN-VF Seat-Height Reinforced Nylon Price Gr.2 * * RXN1722-VF RXN1722R-VF RXN1924R-VF RXN1926-VF RXN1926R-VF RXN2126-VF RXN2128R-VF RXN2232-VF RXN2232R-VF RXN2328R-VF RXN2328-VF RXN2530R-VF RXN2631-VF RXN2833R-VF $303 $332 $332 $332 $362 $305 $362 $345 $374 $334 $308 $338 $310 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use RXP-VF Seat-Height Polished Aluminim Price Gr.2 * * RXP1722-VF RXP1722R-VF RXP1924R-VF RXP1926-VF RXP1926R-VF RXP2126-VF RXP2128R-VF RXP2232-VF RXP2232R-VF RXP2328R-VF RXP2328-VF RXP2530R-VF RXP2631-VF RXP2833R-VF $374 $404 $404 $404 $433 $376 $433 $416 $446 $406 $380 $409 $382 $411 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) All specifications are nominal.

94 RX-VF Series Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/ manufacturing codes. Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example RXN2030-VF). Chrome Finish on The NeuFlexMatic $70 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LRO dual-wheel soft casters that lock when the seat is occupied $86 Footrings Miscellaneous ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 SW skid wrapping; net cost per pallet $23 94 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 C Chrome-plated finish on metal parts resists scratching and scuffing. T base $72 C,N,P base $36 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

95 The RT Series upholstered stools are built with durable backrests for ergonomic comfort, for productivity and easy adjustability in plants, schools, laboratories, health care and static control/esd applications (with performance package added). Users will appreciate the supportive foam of the upholstered seat and the under-the-seat control for easy adjustment of seat height. RT Series RT Series RT Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Seat: round, 16" diameter, upholstered with 4" of highresilience molded foam cushioning, internal seat board bumperguard Backrest: 14.5" wide x 9.5" high, lumbar support, plastic protective panel Controls: Task Control Soft Touch pneumatic seatheight adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chromeplated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the RTN and RTP Series. Fire Retardant: meets California Technical Bulletin 117; treatment to meet Cal TB 133 is available as an option. 95 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a static control/esd performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

96 96RT Series 1L-EHLS/RTT Seat-Height Tubular Price * Model # 1L41-EHLS s. K (GR A) $141. K (GR B) $191. K (GR C) $225 1L57-R-EHLS RTT1722R $432 1L41-R-EHLS 1L42-EHLS 1L58-R-EHLS 1L61-EHLS 1L42-R-EHLS 1L61-R-EHLS 1L62-EHLS 1L62-R-EHLS RTT1722 RTT1924R RTT1926 RTT1926R RTT2126 RTT2128R RTT2328R RTT2530 RTT2732R Gr.2 Gr.3 Gr.4 $403 $453 $485 $432 $432 $461 $409 $461 $438 $414 $444 $482 $482 $482 $512 $459 $512 $489 $465 $494 $514 $514 $514 $543 $491 $543 $520 $496 $ L63-EHLS RTT2934 $420 $471 $502. upcharge to Gr. 2 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 1M-EHLS/RTC Seat-Height Cast Aluminum Price Model # 1M70-EHLS * * 1M51-R-EHLS 1M70-R-EHLS 1M72-EHLS 1M52-R-EHLS 1M43-EHLS 1M72-R-EHLS 1M73-EHLS 1M53-R-EHLS 1M43-R-EHLS 1M64-EHLS 1M64-R-EHLS 1M66-EHLS 1M66-R-EHLS RTC1722 RTC1722R $443 RTC1924R RTC1926 RTC1926R RTC2126 RTC2128R RTC2232 RTC2232R RTC2328R RTC2328 RTC2530R RTC2631 RTC2833R Gr.2 Gr.3 Gr.4 $413 $464 $495 $443 $443 $472 $415 $472 $455 $485 $445 $418 $488 $420 $450 $493 $493 $493 $522 $466 $522 $506 $535 $495 $469 $498 $471 $500 $524 $524 $524 $554 $497 $554 $537 $566 $527 $500 $530 $502 $532 Base C: 5-legged cast aluminum, 23 leg spread s. K (GR A). K (GR B) $96 $128. K (GR C) $153. upcharge to Gr. 2 * Unit standard with casters Not available with casters

97 1M-EHLS-CAB/RTN Seat-Height Reinforced Nylon Price Model # 1M70-EHLS-CAB * * 1M51-R-EHLS-CAB 1M70-R-EHLS-CAB 1M72-EHLS-CAB 1M52-R-EHLS-CAB 1M43-EHLS-CAB 1M72-R-EHLS-CAB 1M73-EHLS-CAB 1M53-R-EHLS-CAB 1M43-R-EHLS-CAB 1M64-EHLS-CAB 1M64-R-EHLS-CAB 1M66-EHLS-CAB 1M66-R-EHLS-CAB RTN1722 RTN1722R $427 RTN1924R RTN1926 RTN1926R RTN2126 RTN2128R RTN2232 RTN2232R RTN2328R RTN2328 RTN2530R RTN2631 RTN2833R Gr.2 Gr.3 Gr.4 $397 $448 $479 $427 $427 $456 $399 $456 $439 $469 $429 $403 $432 $405 $434 $477 $477 $477 $507 $450 $507 $490 $519 $479 $453 $482 $455 $485 $509 $509 $509 $538 $481 $538 $521 $551 $511 $485 $514 $487 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 1M-EHLS-PAL/RTP Seat-Height Polished Aluminum Price Model # 1M70-EHLS-PAL * * 1M51-R-EHLS-PAL 1M70-R-EHLS-PAL 1M72-EHLS-PAL 1M52-R-EHLS-PAL 1M43-EHLS-PAL 1M72-R-EHLS-PAL 1M73-EHLS-PAL 1M53-R-EHLS-PAL 1M43-R-EHLS-PAL 1M64-EHLS-PAL 1M64-R-EHLS-PAL 1M66-EHLS-PAL 1M66-R-EHLS-PAL RTP1722 RTP1722R $498 RTP1924R RTP1926 RTP1926R RTP2126 RTP2128R RTP2232 RTP2232R RTP2328R RTP2328 RTP2530R RTP2631 RTP2833R Gr.2 Gr.3 Gr.4 $469 $519 $551 $498 $498 $528 $471 $528 $511 $540 $500 $474 $503 $476 $506 $549 $549 $549 $578 $521 $578 $561 $591 $551 $524 $554 $527 $556 $580 $580 $580 $609 $553 $609 $593 $622 $582 $556 $585 $558 $587 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. K (GR A). K (GR B) $96 $128. K (GR C) $153. upcharge to Gr. 2 All specifications are nominal.

98 RT Series s We offer these stools with a static control/esd performance package if they have a tubular (T), cast aluminum (C) or polished aluminum (P) base. For more information on the performance package, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/ manufacturing codes. Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 Footrings ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 98 Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example RTN2030). Chrome Finish on The NeuFlexMatic $70 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Backrest C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 A(ERN) narrow, 8 wide x 12 high, spinal support with lumbar curve; available only on RT Series $20 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors Fire Retardant C133 Special upholsteries, foam or barriers (as needed) to meet California Technical Bulletin 133 and Boston Fire Code. Upholstery choices may be limited. Minimums of Grade 2/Grade 3 fabric or Grade 3 vinyl are offered. Contact BioFit for details. Miscellaneous SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 WM Weld-Mate upholstery and foam option for welding operations $169 *Add on to Grade 4 price Seat VU - upholstered underwrap in the same upholstery as the seat $29 STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

99 With the same great features as our RT-VF series but with the addition of the backrest, these stools are also a great choice for use by nurses and RT-VF Standard Features doctors in exam rooms, surgical suites and in recovery. Please note: The T style and the A style backrests are NOT vacuum-formed; however, the vinyl upholstery is the same vinyl in which the seats are upholstered. 13-Year, Sure-Seat Warranty - see page 3 for details. RT-VF Series RT-VF Series Seat: round, 16" diameter, upholstered with 4" of highresilience molded foam cushioning, internal seat board bumperguard Backrest: 14.5" wide x 9.5" high, lumbar support, plastic protective panel Controls: Soft Touch pneumatic seat-height adjustment, Task Control Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3.5, backrest tilt, backrest-height adjustment Metal parts: black powder-coated finish.* A chromeplated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the RT-VF Series. Fire Retardant: meets California Technical Bulletin 117. Upholstery: available in Slate Blue and Black 99 Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

100 100RT-VF Series RTT-VF Seat-Height Tubular Price * RTT1722-VF RTT1722R-VF RTT1924R-VF RTT1926-VF RTT1926R-VF RTT2126-VF RTT2128R-VF RTT2328R-VF RTT2530-VF RTT2732R-VF RTT2934-VF Gr.2 $403 $432 $432 $432 $461 $409 $461 $438 $414 $444 $420 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread RTC-VF Seat-Height Cast Aluminum Price * * RTC1722-VF RTC1722R-VF RTC1924R-VF RTC1926-VF RTC1926R-VF RTC2126-VF RTC2128R-VF RTC2232-VF RTC2232R-VF RTC2328R-VF RTC2328-VF RTC2530R-VF RTC2631-VF RTC2833R-VF Gr.2 $413 $443 $443 $443 $472 $415 $472 $455 $485 $445 $418 $448 $420 $450 Base C: 5-legged cast aluminum, 23 leg spread * Unit standard with casters Not available with casters

101 RTN-VF Seat-Height Reinforced Nylon Price * * RTN1722-VF RTN1722R-VF RTN1924R-VF RTN1926-VF RTN1926R-VF RTN2126-VF RTN2128R-VF RTN2232-VF RTN2232R-VF RTN2328R-VF RTN2328-VF RTN2530R-VF RTN2631-VF RTN2833R-VF Gr.2 $397 $427 $427 $427 $456 $399 $456 $439 $469 $429 $403 $432 $405 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use RTP-VF Seat-Height Polished Aluminum Price Gr.2 RTP1722-VF RTP1722R-VF RTP1924R-VF RTP1926-VF RTP1926R-VF RTP2126-VF RTP2128R-VF RTP2232-VF $469 $498 $498 $498 $528 $471 $528 $511 * * RTP2232R-VF RTP2328R-VF RTP2328-VF RTP2530R-VF RTP2631-VF RTP2833R-VF $540 $500 $474 $503 $476 $506 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) All specifications are nominal.

102 RT-VF Series Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/ manufacturing codes. Special NeuFlexMatic BioFit s exclusive 10 telescoping pneumatic option for desk to bench height applications. It s like having two chairs in one with a seat-height range of Available on C, N and P bases with seat height range of with or without casters. Please note that the manufacturing code seat height will change to (example RTN2030-VF). Chrome Finish on The NeuFlexMatic $70 Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LRO dual-wheel soft casters that lock when the seat is occupied $86 Footrings Miscellaneous ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 SW skid wrapping; net cost per pallet $23 TKB tamperproof (nonremovable) backrest bar $9 102 Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 C Chrome-plated finish on metal parts resists scratching and scuffing. T base $92 C,N,P base $40 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

103 The TX Series steel stools are workhorses durable, adjustable and adaptable to applications in industry, schools, laboratories and clean rooms (with performance package added). The user raises or lowers seat height by touching a paddle under the seat. TX Series TX Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Seat: round, 13" diameter, made of 18-gauge steel with formed flange and no sharp edges Controls: Soft Touch pneumatic seat-height adjustment Metal parts: black powder-coated finish.* A chromeplated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the TXN, TXP Series. 103 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room and/or static control performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

104 TX Series 1J/TXT Seat-Height * * * * Model # 1J41 1J57-R 1J42 1J58-R 1J41-R 1J61 1J42-R 1J61-R Tubular TXT1419 TXT1419R TXT1522 TXT1522R TXT1621R TXT1722 TXT1724R TXT1924R Price $237 $266 $266 $266 $296 $243 $296 $272 1J62 TXT2126 $248 1J62-R TXT2328R $ J63 TXT2530 $255 s. CR10 $ Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 1I/TXC Seat-Height * * * * * * Cast Aluminum Model # 1I70 TXC1419 1I51-R TXC1419R 1I72 TXC1522 1I52-R TXC1522R 1I70-R TXC1621R 1I43 TXC1722 1I72-R TXC1724R 1I73 TXC1828 1I53-R TXC1828R 1I43-R TXC1924R 1I64 TXC1924 1I64-R TXC2126R 1I66 TXC2328 1I66-R TXC2530R Price $247 $277 $277 $277 $306 $249 $306 $289 $319 $279 $252 $282 $255 $284 Base C: 5-legged cast aluminum, 23 leg spread s. CR10 $72 * Unit standard with casters Not available with casters

105 1I-CAB/TXN Seat-Height Reinforced Nylon Model # * * * * I70-CAB 1I51-R-CAB 1I72-CAB 1I52-R-CAB 1I70-R-CAB 1I43-CAB 1I72-R-CAB 1I73-CAB TXN1419 TXN1419R TXN1522 TXN1522R TXN1621R TXN1722 TXN1724R TXN * 1I53-R-CAB 1I43-R-CAB TXN1828R TXN1924R I64-CAB TXN1924 * 1I64-R-CAB TXN2126R 1I66-CAB TXN2328 1I66-R-CAB TXN2530R Price $231 $261 $261 $261 $290 $234 $290 $273 $303 $263 $237 $266 $239 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 1I-PAL/TXP Seat-Height Polished Aluminum * * * * * * Model # 1I70-PAL 1I51-R-PAL 1I72-PAL 1I52-R-PAL 1I70-R-PAL 1I43-PAL 1I72-R-PAL 1I73-PAL 1I53-R-PAL 1I43-R-PAL 1I64-PAL 1I64-R-PAL 1I66-PAL 1I66-R-PAL TXP1419 TXP1419R TXP1522 TXP1522R TXP1621R TXP1722 TXP1724R TXP1828 TXP1828R TXP1924R TXP1924 TXP2126R TXP2328 TXP2530R Price $303 $332 $332 $332 $362 $305 $362 $345 $374 $334 $308 $338 $310 $340 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s. CR10 $72 All specifications are nominal.

106 TX Series s We offer TX Series stools with a clean room Class 10 performance package. For more information on the clean room package, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Seat-Height Adjustment Mechanism Other seat-height adjustment ranges are available with special pneumatic mechanisms. Call BioFit for details. Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 Footrings Miscellaneous ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 SW skid wrapping; net cost per pallet $ Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 C Chrome-plated finish on metal parts resists scratching and scuffing. T base $72 C,N,P base $36 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Seats WS round maple wood seat, 13 diameter and 1 thick; not for clean room or static control use. $26 LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 Z -pullover seat cushion, 1.5 thick; recommended for use only on steel seats; not for clean room or static control use. Z GRADE 2 $50 Z GRADE 3 $63 Z GRADE 4 $80 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

107 The CX Series is a version of the TX Series with a self-skinned urethane seat. The CX Series is durable, easy to clean and resistant to stains and damage from water and chemicals. Its flexible non-marring surface provides easy wash down and resistance to cracks and abrasions. The user raises or lowers seat height by touching a paddle under the seat. CX Series CX Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Seat: round, 14" diameter, 1.5" thick, self-skinned urethane Controls: Soft Touch pneumatic seat-height adjustment Metal parts: black powder-coated finish.* A chromeplated finish is standard with performance packages. Chrome also is offered as an added-cost option on most other seating. Choice of bases as indicated: tubular (T), cast aluminum (C), reinforced nylon (N) or polished aluminum (P). Base type is the third letter of the manufacturing code. Casters and Glides: Models available standard with casters have an R following the model number/manufacturing code. The remaining models are standard with nickel-plated glides. Standard casters are a single-wheel ball bearing caster for hard floors; many other options are available such as the XR dual-wheel carpet casters shown on the CXN and CXP Series. 107 *See Finish under Options. Ordering Products After you have selected the seat-height adjustment range and base you need, note the manufacturing code. If applicable, choose options and select a clean room performance package. Then, contact BioFit to help you finalize your order. Need a Quick Quote? Go > > Get-a-Quote

108 108CX Series 1J-URS/CXT Seat-Height * * * Model # 1J41-URS 1J57-R-URS 1J41-R-URS 1J42-URS 1J58-R-URS 1J61-URS 1J42-R-URS 1J61-R-URS s $100 Tubular CXT1520 CXT1520R CXT1722R CXT1724 CXT1724R CXT1924 CXT1926R CXT2126R Price $307 $336 $336 $336 $366 $313 $366 $343 1J62-URS CXT2328 $319 1J62-R-URS CXT2530R $ J63-URS CXT2732 $325 Base T: 5-legged tubular steel with 20 diameter attached footring, 23 leg spread 1I-URS/CXC Seat-Height Cast Aluminum Model # * * I70-URS 1I51-R-URS 1I70-R-URS 1I72-URS 1I52-R-URS 1I43-URS 1I72-R-URS 1I73-URS CXC1520 CXC1520R CXC1722R CXC1724 CXC1724R CXC1924 CXC1926R CXC * * 1I53-R-URS 1I43-R-URS CXC1929R CXC2126R 1I64-URS CXC2126 1I64-R-URS CXC2328R I66-URS CXC * 1I66-R-URS CXC2631R Price $318 $347 $347 $347 $376 $320 $376 $360 $389 $349 $323 $352 $325 $354 Base C: 5-legged cast aluminum, 23 leg spread s $48 * Unit standard with casters Not available with casters

109 1I-URS-CAB/CXN Seat-Height Reinforced Nylon Model # * * I70-URS-CAB 1I51-R-URS-CAB 1I70-R-URS-CAB 1I72-URS-CAB 1I52-R-URS-CAB 1I43-URS-CAB 1I72-R-URS-CAB 1I73-URS-CAB CXN1520 CXN1520R CXN1722R CXN1724 CXN1724R CXN1924 CXN1926R CXN * * 1I53-R-URS-CAB 1I43-R-URS-CAB CXN1929R CXN2126R 1I64-URS-CAB CXN2126 1I64-R-URS-CAB CXN2328R I66-URS-CAB CXN * 1I66-R-URS-CAB CXN2631R Price $302 $331 $331 $331 $361 $304 $361 $344 $373 $333 $307 $336 $309 $ Base N: 5-legged black reinforced nylon, 27 leg spread (26 caster to caster) not for ESD use 1I-URS-PAL/CXP Seat-Height Polished Aluminum Model # * * I70-URS-PAL 1I51-R-URS-PAL 1I70-R-URS-PAL 1I72-URS-PAL 1I52-R-URS-PAL 1I43-URS-PAL 1I72-R-URS-PAL 1I73-URS-PAL CXP1520 CXP1520R CXP1722R CXP1724 CXP1724R CXP1924 CXP1926R CXP * * 1I53-R-URS-PAL 1I43-R-URS-PAL CXP1929R CXP2126R 1I64-URS-PAL CXP2126 1I64-R-URS-PAL CXP2328R I66-URS-PAL CXP * 1I66-R-URS-PAL CXP2631R Price $373 $403 $403 $403 $432 $375 $432 $415 $445 $405 $378 $408 $381 $410 Base P: 5-legged fully polished cast aluminum, 27 leg spread (26 caster to caster) s $48 All specifications are nominal.

110 CX Series s We offer CX Series stools with a clean room Class 1000 performance package. For more information on the clean room package, contact BioFit for a Microtech TM catalog. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Seat-Height Adjustment Mechanism Other seat-height adjustment ranges are available with special pneumatic mechanisms. Call BioFit for details. Casters and Glides BPG oversized, 2 diameter plastic base glides $21 CRC dual-wheel polyurethane casters for hard floors. Recommended for clean room use. GFR wide, dual-wheel casters for grated floors; not available for ESD applications $23 LKRO conductive dual-wheel casters that lock when seat is occupied; not for chairs with nylon (N) base $143 Footrings Miscellaneous ATF adjustable-height, 20 diameter cast aluminum footring; recommended for chairs with cast aluminum (C), nylon (N) and polished aluminum (P) bases and seat heights greater than 22. Not recommended for the tubular (T) base. $76 G 20 diameter chrome-plated footring replaces powder-coated footring on tubular (T) base or is permanently attached to cast aluminum (C) or polished aluminum (P) base. Not available on nylon (N) base. Recommended for chairs with C or P base and a maximum seat height of 27. T base $17 C or P base $33 SW skid wrapping; net cost per pallet $ Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. LKRU conductive dual-wheel casters that resist movement when seat is unoccupied; not for chairs with nylon (N) base $75 LRO dual-wheel soft casters that lock when the seat is occupied $86 C Chrome-plated finish on metal parts resists scratching and scuffing. T base $72 C,N,P base $36 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. LRU dual-wheel soft casters that resist movement when the seat is not occupied $17 MLR dual-wheel, soft manual locking casters $28 NGC nylon glide covers for standard glides $11 NSG nonskid glides $21 R single-wheel, thermoplastic rubber, nonmarring ball bearing casters for hard floors STR dual-wheel, nonmarring conductive casters; not for chairs with nylon (N) base. Appropriate for clean room use. $70 XR dual-wheel carpet casters Need a Quick Quote? Go > > Get-a-Quote

111 The 2A and 2A-VF vacuum-formed- Series with foot activated height adjustment is the logical choice when workers need hands free to perform tasks, yet need to adjust the height of their seating. Surgeons 2A Series Standard Features Base: five-legged, cast aluminum, 23 leg spread Seat: 16 diameter, round, upholstered with 4 of high-resilience foam cushioning, internal seat board bumperguard Control: foot-activated, pneumatic seat-height adjustment Metal parts: chrome-plated finish Casters: single-wheel ball bearing casters for hard floors will find the hands-free, foot activated seat height adjustment feature of this stool easy to use. It s also ideal for lab technicians, phlebotomists and nurses. These stools are exceptional for exam rooms. 13-Year, Sure-Seat Warranty - see page 3 for details. 2A Series / 2A-VF Series 111 There are no options for the 2A Series. 2A Seat-Height Cast Aluminum Price * Unit standard with casters Model # Gr. 2 Gr. 3 Gr * 2A10-C-R $562 $587 $ * 2A20-C-R $576 $601 $617 2A-VF Series Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Base: five-legged, cast aluminum, 23 leg spread Seat: 16 diameter, round, upholstered with 4 of high-resilience molded foam cushioning, internal seat board bumperguard Control: foot-activated, pneumatic seat-height adjustment Metal parts: chrome-plated finish Casters: single-wheel ball bearing casters for hard floors There are no options for the 2A-VF Series. 2A-VF Seat-Height Cast Aluminum Price * Unit standard with casters Model # Gr * 2A10-C-R-VF $ * 2A20-C-R-VF $576 Need a Quick Quote? Go > > Get-a-Quote

112 1Y Series This versatile stool is mounted to a wall or other solid vertical surface to assure that even the most challenging workstation space can have functional seating. The user can easily swing the stool out from the wall to a work position or swing it under a conveyor to stations on either side of a production line or out of the way for cleaning or storage. The stool is extremely mobile until an individual sits on the seat and puts the seat base in contact with the floor. The user can adjust seat height for added comfort and to fit the task. The stool is equipped with a nonskid glide to give the seated user added steadiness. It is also available with many optional seat and backrest configurations. 1Y Series Standard Features 13-Year, Sure-Seat Warranty - see page 3 for details. Seat: 13 diameter, made of 18-gauge steel with formed flange and no sharp edges Control: Soft-Touch pueumatic seat-height adjustment (range of 5.25 ) Frame: two bar unit, diameter, made of 16-gauge steel tubing Attaching Bracket: 2 wide, made of 7-gauge steel, spring loaded to allow stool base to contact floor only when weight is applied to the unit 112 Metal parts: black powder-coated finish Glides: nonskid 1Y50 Model # Non-Uphol. Upholstery Low Seat Height Wall to Outside Edge of Seat 1Y50 $466 Grades Optional Seat Type Gr.2 Gr.3 Gr.4 1Y50-BE $179 $229 $ Y50-BT $152 $202 $ Y50-CX $ Y50-EE $228 $279 $ Y50-ET $201 $251 $ Y50-GG $ Y50-KX $ Y50-RT $166 $217 $ Y50-RX $72 $97 $ Y50-UU $ Y50-RX-VF $72 $97 $ Y50-RT-VF $166 $217 $ Y50-HL-VF $299 $349 $ Y50-WS $ Y50-WW $

113 Ordering Products After you have noted the model number, choose the options you would like, and then contact BioFit to help you finalize your order. s There are no performance packages offered on 1Y seating. Options There are numerous seat and backrest options offered on 1Y seating. The seat changes the low seat height and wall-tooutside edge of seat dimensions. See the chart to determine these dimensions. Adding a seat/backrest combination also adds Task Control to the product; Task Control includes Soft Touch pneumatic seat-height adjustment, fixed rearward seat tilt of 3.5, backrest tilt and backrest-height adjustment. There are additional charges for most options. Add option codes listed in bold to the end of the model number. Model shown has optional RX-VF seat. Seat: 16 diameter, round, upholstered, with 4 of high-resilience foam cushioning, vacuum-formed upholstery Control: soft touch pneumatic seat-height adjustment Frame: Two-bar unit, diameter made of 16-gauge steel tubing Glide: Nonskid Available Seats and Seat/Backrest Combinations Attaching Bracket: 2 wide, made of 7-gauge steel, spring loaded to allow stool base to contact floor only when weight is applied to the unit BE - Backrest is wide x high, lumbar support, plastic protective panel; seat is concave, wide x deep x 3 thick with internal seat board bumperguard. GG - Backrest is 16 wide x high, lumbar support; seat is concave, wide x deep. RX-VF Seat is round, 16 diameter, upholstered with 4 of high-resilience molded foam cushioning, internal seat board bumperguard, vacuum-formed upholstery 113 BT - Backrest is wide x 9.50 high, lumbar support, plastic protective panel; seat is concave, wide x deep x 3 thick with internal seat board bumperguard. KX Seat/backrest is one-piece, high-density polypropylene plastic shell, 18 wide x 17 deep x 18.5 high. RT-VF Backrest is wide x 9.50 high with lumbar support and plastic protective panel; seat is round, 16 diameter, upholstered with 4 of high-resilience molded foam cushioning, internal seat board bumperguard, vacuum-formed seat. Please note: The T style backrest is NOT vacuum-formed; however, the vinyl upholstery is the same vinyl in which the seats are upholstered.) CX Seat is round, 14 diameter, self-skinned urethane. RT Backrest is wide x 9.50 high with lumbar support and plastic protective panel; seat is round, 16 diameter, upholstered with 4 of high-resilience molded foam cushioning, internal seat board bumperguard. HL-VF Backrest is wide x high with lumbar curve and plastic back protective panel, height and tilt adjustment standard; seat is ergonmic, wide x 17 deep x 3 thick with waterfall front, four-way contouring, vacuum-formed upholstery EE Backrest is wide x high, lumbar support, plastic protective panel; seat is ergonomic, wide x 17 deep x 3 thick with waterfall front, four-way contouring and internal seat board bumperguard. RX Seat is round, 16 diameter, upholstered with 4 of high-resilience molded foam cushioning, internal seat board bumperguard. WS Seat is round, maple wood, 13 diameter and 1 thick. ET Backrest is wide x 9.50 high with lumbar support, plastic protective panel; seat is ergonomic, wide x 17 deep x 3 thick with waterfall front, four-way contouring and internal seat board bumperguard. UU Backrest is self-skinned urethane with integral lumbar support, wide x high with ventilating ribs; seat is self-skinned urethane,18.50 wide x 17 deep x 1.50 thick with waterfall front, shaped rear edge and ventilating ribs. WW Backrest is wide x 8.75 high x.25 thick 5-ply maple plywood; seat is wide x deep x.50 thick 7-ply maple plywood with waterfall front. Finish Black powder-coated finish is standard. All specifications are nominal.

114 Specialty Stools These stools provide comfort and support for workers in a variety of situations. The GX Series sit/stand allows users to alternate easily between sitting and standing, easing stress on their legs and feet. The seat can GX Series Standard Features Seat: 13 x 13 black, self-skinned urethane with built-in handle Controls: Soft Touch pneumatic seat-height adjustment, seat tilts from horizontal to 6 forward Metal parts: black powder-coated or chrome-plated finish be adjusted for height and/or tilted forward as needed. The AJ Series fixed-height stools are an option for basic no-frills seating. The leg frame is fully welded for superior strength, and the footring is double-welded for added toughness. The small footprint of the TXG Series stools makes them 13-Year, Sure-Seat Warranty - see page 3 for details. uniquely suited to areas with limited space while still providing easy adjustability for multiple users and multi-shift operations. 114 Choice of bases as indicated: trumpet (T) or tubular (1); trumpet is 23 diameter; tubular is 5-legged tubular steel with 20 diameter attached footring and 23 leg spread. Glides on GX1: nonskid GX Seat-Height Non-Uphol. Model # GXT20 GXT50 GX120 GX150 Price $621 $624 $375 $378 Options are listed below. All specifications are nominal. Ordering Products After you have selected the stool you need, note the manufacturing code. If applicable, select the clean room performance package and choose from the options offered. Then, contact BioFit to help you finalize your order. Options Option codes are listed below. The order code for the option is shown in bold capital letters. Add option codes to the end of the model number. There are additional charges for options. See page 6 for details about model numbers/manufacturing codes. Finish While black powder-coated finish is standard, we also offer putty, gray and silvervein powder-coated finishes. Chrome plating is standard with clean room and/or static control/esd performance packages. Otherwise, chrome plating or matching a specific paint finish is available as an added-cost option. s We offer the TXG Series and AJ Series stools with a clean room Class 10 performance package. For more information about the clean room package, contact BioFit for a Microtech TM catalog. Seats URS round, self-skinned urethane seat, 14 diameter and 1.50 thick; not for cleanroom use, offered on TXG and AJ Series stools TXG- $71 AJ- $71 WS round, maple wood seat, 13 diameter and 1 thick; not for cleanroom use, offered on TXG and AJ Series stools TXG- $26 AJ- $26 C Chrome-plated finish on metal parts resists scratching and scuffing. GX- $58 AJ- $90 TXG- $58 SPF Special paint finishes are available. Please ask for a selection of colors or help in matching an existing color. Call for lead time and cost. Miscellaneous SW skid wrapping; net cost per pallet $23 Z pullover seat cushion, 1.50 thick; only offered on TXG Series stools TXG- Z Gr. 2 $50 Z Gr. 3 $63 Z Gr. 4 $80

115 AJ Series Standard Features Base: four-legged, all-welded construction, made of gauge steel tubing Footring: 16 diameter, made of gauge steel tubing, welded both top and bottom Seat: 13 diameter, made of 18-gauge steel with formed flange and no sharp edges Metal parts: black powder-coated finish.* A chrome-plated finish is standard with the performance package. Chrome is also offered as an added-cost option. Glides: self-leveling, nickel plated 115 *See finish under options. AJ Seat-Height Fixed Non-Uphol. Price Model # AJ-18 $149 AJ-24 $153 AJ-30 $158 s CR10 $130 All specifications are nominal. See options listed on page 114. TXG Series Standard Features Base: compact, four-legged, tubular, 16 leg spread Seat: 13 diameter, made of 18-gauge steel with formed flange and no sharp edges Control: Soft Touch pneumatic seat-height adjustment Metal parts: black powder-coated finish.* A chrome-plated finish is standard with the performance package. Chrome is also offered as an added-cost option. Glides: nickel plated TXG Seat-Height Model # Tubular Non Uphol. Price s CR10 $ G41 TXG1722 $ G65 TXG2025 $188 See options listed on page 114. *See finish under options. All specifications are nominal.

116 FS-1 / FS2 Footrests This chair catalog would not be complete without including our footrests because free-standing footrests provide a specific kind of support that chairs cannot. Many people need foot and leg support to be comfortable all day. BioFit offers adjustable footrests in two sizes. The FS-1 footrest is available on our Ship Now! quick-ship program. Standard Features Height adjustability range: From 3 to 11 in 1 increments Metal parts: black powder-coated finish or chrome-plated finish (when part of a performance package) FS-1 Platform dimension: 20 wide x 11 deep with 10 slope FS-2 Platform dimension: 12 wide x 11 deep with 10 slope FS-1 FS-1 / FS-2 Footrests 116 Height 3-11 Model # FS-1 Price $157 FS FS-2 $149 s = Ship Now K $126 We offer footrests with a static control/esd performance package. For more information on a static control/esd package, contact BioFit for a Microtech TM catalog. Option The order code for the option is shown in bold capital letters. Add the option code to the end of the model number. There is an additional charge for options. Finish While black powder-coated finish is standard, chrome plating is standard on footrests with a static control/esd performance package; otherwise it is an added-cost option. C Chrome-plated finish on metal parts resists scratching and scuffing. $40 Seating Is Only Part of What We Do BioFit also manufactures numerous styles of carts and tables including our exclusive, patented 10-seat oval cafeteria table, traditional cafeteria tables, fold and roll tables in a variety of shapes and the AdapTable convertible bench/table. Call BioFit at for more information or check our web site, for catalogs and other details.