ENGLISH DATED Large Sweepers SL410/480/580. Reliable, robust, economical. Innovative strength.

Transcription

1 ENGLISH DATED Large Sweepers SL410/480/580 Reliable, robust, economical. Innovative strength.

2 Large Sweepers SL 410/480/580 ENGLISH DATED Pre-eminence at its very best. BROCK SL 410/480/580. The SL 410/480/580 series tackle the highest cleaning demands with an extra amount of power and endurance, especially when it comes to road construction. Thanks to the BROCK trademarked building block system, these giants among large r oad sweepers, as with all vehicles bearing the BROCK name, can be easily outfi tted or r etrofi tted for summer or winter operations. The SL 410/480/580 master a multitude of tasks with the help of a wide spectrum of auxiliary equipment options, which optimally prepare the vehicles for even the most demanding applications. These r oad sweepers r each gigantic pr oportions, even in their standard confi gurations: The enormous turbine airfl ow capacity of 480 m³ per minute provides the SL 410/480/580 series with an extr emely high suction for ce. These largest of the large road sweepers from BROCK clear the way and make a quick end to road construction residue, gravel, loose pavement material and oil r esidue for gr eater road traffi c cleanliness and safety Efficient auxiliary equipment: Upstream, high-performance power nozzles work with a water pressure of up to 300 bar. The SL 410/480/580 assembly group is characterized by its unique design. The SL 410/480/580 series stand out every time they re emptied thanks to their 60 tilt angle and service-friendly hopper pivot fulcrum. 3

3 Large Sweepes SL 410/480/580 3 Reliable, robust, economical. High-performance in a large format. New standards with regard to cleanliness and endurance. With 9.5, 10 or 1 m³ debris hoppers and 3,000, 3,500 or 5,000 litr e water tanks, the SL 410/480/580 are ideally pr epared to take on the longest and most fi lthiest of jobs. All units except the debris hopper are made at our own facilities. The components featur e outstanding material pr operties with low wearing characteristics. The debris hopper walls, middle partition and fl ooring are manufactured out of high quality (1.4301) stainless steel, while further components on the sweeper unit are made of steal ST 5-3 steel with special protective lacquering. These road sweeper giants are a rewarding investment, especially when there are extensive areas to wash and clean: With one full tank of water, they can accomplish what other vehicles would r equire multiple trips and fi llings to accomplish. Other advantages of these economical and envir onmentally friendly vehicles: The flexibility, reliability and robustness of the SL 410/480/580, together with excellent driving comfort, many special functions and distinct user friendliness transform these into high performers with regard to cleanliness. 4 BROCK technology comes to grips with all road surface dirt and contamination. 5 Efficient cleaning through power nozzles and technology bearing the BROCK name. 6 The SL 410/480/580 cleaning systems offer excellent technology for the highest levels of cleanliness. 7 Robust and high quality to the most minute detail: pneumatic lateral water nozzles

4 4 Large Sweeper SL 480 Technical changes reserved. Some photos may include extra features. All data +/- 5%.

5 Large Sweeper SL TECHNICAL DATA SL 410 Jumbo K K SL 410 Jumbo K K Superstructure s s Hopper volume [ m³ ] 9,5 9,5 9,5 9,5 Water tank [ litre ] 3,000 3,000 3,000 3,000 Auxiliary water tank possible Sweeping unit [ mm ] Width of suction duct Ø Feeder roller Ø Length of feeder roller 1,500 1,500 1,500 1,500 Suction hose Ø Head of water 1,000 1,000 1,000 1,000 Certification [ additional ] s s PM 10 to Eunited standard Drive system Auxiliary engine Daimler OM 904 LA Euromot IIIa [ kw ] Hydrostat OMSI optional HT 600 HT 600 HT 600 HT 600 Standard equipment [ optional ] Hopper s/hopper base/centre partition made of material Sweepgear extendable and retractable in sweep mode Sweeping width [ maximum mm ] Couble, right or left 1,600 1,600, R, with roller 3,000 3,000, right or left 1,135 1,135, R, with roller,600,600, L, with roller,600,600, R/L, with roller Option: on both s simultaneously 4,450 3,300 Recommended chassis Min. permissible total weigh [ t ] Min. wheelbase [ mm ] 3,700 3,700 3,700 3,700 Overall vehicle [ example ] Approx. length [ mm ] 8,00 8,00 8,00 8,00 Approx. width [ mm ],500,500,500,500 Approx. height [ mm ] 3,00 3,00 3,00 3,00 Kerb weight incl. superstructure in standard version [ kg ] 17,795 17,545 17,995 17,745 Superstructure kerb weight [ kg ] 4,995 4,745 5,195 4,945 Mini console Two-speed coarse pick-up Water tank enlargeable without surface suction unit Water tank enlargeable with surface suction unit Jumbo S Version 80 mm hose diameter 1,50 mm head of water SL 410 Standard Sweeper fitted as standard with double sweepgear on the right or left / extendable and retractable in sweep mode / two-speed coarse pick-up / aluminium panelling / water bar on the bumper SL 410 K Sweeper fitted as standard with sweepgear on the right SL 410 Sweeper fitted as standard with double sweepgear on the right and left / sweepgear extendable and retractable in sweep mode / two-speed coarse pick-up / aluminium panelling / water bar on the bumper SL 410 K Sweeper fitted as standard with sweepgear on the right and left Technical changes reserved. No responsibility is taken for the correctness of this information. As standard Not available Optional

6 6 Large Sweeper SL 480 Technical changes reserved. Some photos may include extra features. All data +/- 5%.

7 Large Sweeper SL TECHNICAL DATA SL 480 Jumbo K K SL 480 Jumbo K K Superstructure s s Hopper volume [ m³ ] Water tank [ litre ] 3,500 3,500 3,500 3,500 Auxiliary water tank possible Sweeping unit [ mm ] Width of suction duct Ø Feeder roller Ø Length of feeder roller 1,500 1,500 1,500 1,500 Suction hose Ø Head of water 1,000 1,000 1,000 1,000 Certification [ additional ] s s PM 10 to Eunited standard Drive system Auxiliary engine Daimler OM 904 LA Euromot IIIa [ kw ] Hydrostat OMSI optional HT 600 HT 600 HT 600 HT 600 Standard equipment [ optional ] Hopper s/hopper base/centre partition made of material Sweepgear extendable and retractable in sweep mode Sweeping width [ maximum mm ] Couble, right or left 1,600 1,600, R, with roller 3,000 3,000, right or left 1,135 1,135, R, with roller,600,600, L, with roller,600,600, R/L, with roller Option: on both s simultaneously 4,450 3,300 Recommended chassis Min. permissible total weigh [ t ] Min. wheelbase [ mm ] 3,900 3,900 3,900 3,900 Overall vehicle [ example ] Approx. length [ mm ] 8,400 8,400 8,400 8,400 Approx. width [ mm ],500,500,500,500 Approx. height [ mm ] 3,00 3,00 3,00 3,00 Kerb weight incl. superstructure in standard version [ kg ] 13,674 13,474 13,874 13,674 Superstructure kerb weight [ kg ] 5,300 5,100 5,500 5,300 Mini console Two-speed coarse pick-up Water tank enlargeable without surface suction unit Water tank enlargeable with surface suction unit Jumbo S Version 80 mm hose diameter 1,50 mm head of water SL 480 Standard Sweeper fitted as standard with double sweepgear on the right or left / extendable and retractable in sweep mode / two-speed coarse pick-up / aluminium panelling / water bar on the bumper SL 480 K Sweeper fitted as standard with sweepgear on the right SL 480 Sweeper fitted as standard with double sweepgear on the right and left / sweepgear extendable and retractable in sweep mode / two-speed coarse pick-up / aluminium panelling / water bar on the bumper SL 480 K Sweeper fitted as standard with sweepgear on the right and left Technical changes reserved. No responsibility is taken for the correctness of this information. As standard Not available Optional

8 8 Large Sweeper SL 410 Technical changes reserved. Some photos may include extra features. All data +/- 5%.

9 Large Sweeper SL TECHNICAL DATA SL 580 Jumbo K K SL 580 Jumbo K K Superstructure s s Hopper volume [ m³ ] Water tank [ litre ] 5,000 5,000 5,000 5,000 Auxiliary water tank possible Sweeping unit [ mm ] Width of suction duct Ø Feeder roller Ø Length of feeder roller 1,500 1,500 1,500 1,500 Suction hose Ø Head of water 1,000 1,000 1,000 1,000 Certification [ additional ] s s PM 10 to Eunited standard Drive system Auxiliary engine Daimler OM 904 LA Euromot IIIa [ kw ] Hydrostat OMSI optional HT 600 HT 600 HT 600 HT 600 Standard equipment [ optional ] Hopper s/hopper base/centre partition made of material Sweepgear extendable and retractable in sweep mode Sweeping width [ maximum mm ] Couble, right or left 1,600 1,600, R, with roller 3,000 3,000, right or left 1,135 1,135, R, with roller,600,600, L, with roller,600,600, R/L, with roller Option: on both s simultaneously 4,450 3,300 Recommended chassis Min. permissible total weigh [ t ] Min. wheelbase [ mm ] 3,900 3,900 3,900 3,900 Overall vehicle [ example ] Approx. length [ mm ] 8,400 8,400 8,400 8,400 Approx. width [ mm ],500,500,500,500 Approx. height [ mm ] 3,00 3,00 3,00 3,00 Kerb weight incl. superstructure in standard version [ kg ] 13,794 13,774 14,174 13,974 Superstructure kerb weight [ kg ] 5,600 5,400 5,800 5,600 Mini console Two-speed coarse pick-up Water tank enlargeable without surface suction unit Water tank enlargeable with surface suction unit Jumbo S Version 80 mm hose diameter 1,50 mm head of water SL 580 Standard Sweeper fitted as standard with double sweepgear on the right or left / extendable and retractable in sweep mode / two-speed coarse pick-up / aluminium panelling / water bar on the bumper SL 580 K Sweeper fitted as standard with sweepgear on the right SL 580 Sweeper fitted as standard with double sweepgear on the right and left / sweepgear extendable and retractable in sweep mode / two-speed coarse pick-up / aluminium panelling / water bar on the bumper SL 580 K Sweeper fitted as standard with sweepgear on the right and left Technical changes reserved. No responsibility is taken for the correctness of this information. As standard Not available Optional

10 10 COMPANY PROFILE BROCK Kehrtechnik GmbH BROCK Kehrtechnik GmbH stands for innovation, competency and quality in the design and manufacture of high-end sweepers. The specialised expertise of our committed employees and our many years of experience in development and servicing form the basis of our customer-oriented quality policy. This includes competent advice and a reliable service, as well, of course, as quick maintenance and repairs on site. Our mobile customer service and our service partners are always on hand, and the doors of our Witten plant are always open. We focus on the customer as early on as the design phase. The BROCK sweeper concept was, for this reason, intentionally developed as a modular system. Depending on the chassis model, we can supply hopper sizes from 3 to 1 m³ with sweepgear on the right-hand, left-hand or both s. We also fulfi l any additional special requirements straightaway without any complications. At our company, the customer always sets the benchmarks, so we regularly enquire about and review customers satisfaction with our company. OUR PRODUCT RANGE Sweepers in sizes 3 to 1 m³ Compact sweepers Large sweepers Airport equipment OUR COMPANY PRINCIPLES OUR QUALITY POLICY Our success depends on the satisfaction of our customers. We are always searching for optimum solutions to individual problems. We make it our priority to be a consistently reliable partner for our customers and be worthy of the trust placed in us. We aim to meet all prerequisites to ensure that we fulfi l ourcustomers expectations and stay one step ahead of their requirements. We live up to this claim set out in our company principles by pursuing our quality policy consistently at all organisational levels. Ongoing qualifi ed analysis of customer requirements. Competent advice and identifi cation of optimum solutions for specifi c customer applications. Development and manufacture of reliable and serviceable products. Ongoing review of the research status in order to fulfi l all customer requirements in future too. Guaranteed quick, smooth order processing an prompt delivery to schedule. Timely provision of comprehensible documentation. Continuous optimisation of company processes and an ongoing review of the effectiveness of our QM system.

11 11 PARTNER NETWORK WORLDWIDE EUROPE WORLDWIDE: Angola, Armenia, Azerbaijan, Bangladesh, Belarus, Burma, Egypt, French Guyana, India, Indonesia, Iran, Iraq, Israel, Jordan, Kazakhstan, Kenya, Kyrgyzstan, La Reunion, Lebanon, Libya, Martinique, Mauritania, Mexico, Nepal, Pakistan, Russian Federation, Sudan, Tajikistan, Tanzania, Tunisia, Turkmenistan, Uzbekistan EUROPE: Austria, Baltic States, Belgium-Flanders, Belgium-Wallonia, Bosnia & Herzegovina, Croatia, Czech Republic, Denmark, Finland, France, Georgia, Great Britain, Greece, Hungary, Italy, Moldova, Montenegro, Netherlands, Norway, Poland, Portugal, Romania, Serbia & Macedonia, Spain, Sweden, Switzerland, Turkey, Ukraine

12 YOUR REGIONAL CONTACT Salinger Feld 10 a Witten Germany Tel.: 0049 (0) Fax: 0049 (0) info@brock-kehrtechnik.de