12520 Quentin Ave. So., Suite 100 Savage, MN (952) (800) Rental Guide

Size: px

Start display at page:

Download "12520 Quentin Ave. So., Suite 100 Savage, MN (952) (800) Rental Guide"

Oliver Ramsey
5 years ago
Views:

1 12520 Quentin Ave. So., Suite 100 Savage, MN (952) (800) Rental Guide

2 Rental Terms & Policies 1. Credit - All rentals require a customer to have an open account and are subject to approval by our credit department. 2. Hauling - Customer is responsible for all hauling charges to and from jobsites. 3. Insurance A. Liability: proof of General Liability insurance must be provided to RMS prior to taking possession of equipment. The minimum liability coverage amount is $1,000,000 per occurrence, with RMS named as an additional insured. B. Physical Damage: proof of physical loss insurance is required for the value of each piece of equipment rented. A damage waiver for physical loss can be provided by RMS at an additional cost of 12% of the rental rate. 4. Contract: A rental contract must be signed for each separate order of rental equipment by the customer. In addition, the renter is required to provide complete jobsite information where equipment will be located including the job number and corresponding bond information, if applicable. Renter is responsible to notify RMS of any/all job or location changes of the rented equipment. 5. Rates: Rates shown in this publication do not include sales tax or insurance coverage. Rates are based as follows: Daily - 8 hours Weekly - 40 hours or 5 days 4 Weeks -160 hours for general equipment. Any overtime hours will be prorated at 70% of the normal rental rate. 6. Rental Purchase Option: RMS will apply 100% of all rentals to the established option price, less an interest charge which will be computed at the rate of prime plus 3%. This rate is subject to change. At rental conversion, all non-warrantable repairs and maintenance during the rental period will be added to the option price. 7. Repairs & Maintenance: Any damage to the equipment due to abuse or negligence will be charged to the lessee on return of the rental equipment. While the units are in the possession of the lessee, lessee is responsible for normal preventative maintenance, as required by the manufacturer. Such items include oil changes, filter changes, etc. 8. Additional Responsibilities-Lessee: Ensure that equipment is properly secured to transport vehicles. Observe legal weights and dimensions. Authorize transportation provider to sign shipping papers, checkout/in forms and safety checklists. Charges for abnormal tire wear including cuts, abrasions, and punctures. Charges for manuals or keys not returned. Returning machine with full fuel tank or paying for fuel used. Cleaning labor in excess of 2 hours, which would include shoveling of tracks. Additional charges as listed on the rental rate sheet for type of equipment rented. PAGE 2 RMS RENTALS RENTAL RATES AND TERMS

Lifting & Hoisting Telehandlers Operating G5-19A $215 $645 $1,935 JLG, 5,000# capacity 19 lift height 14,000 G12-55 $444 $1,365 $4,095 JLG, 12,000# capacity 55 lift height 35,100 6036 $250 $750

$335 $1,005 $3,015 SkyTrak, 10,000# capacity 42 lift height 26,883 10054 $395 $1,185 $3,555 SkyTrak, 10,000# capacity 54 lift height 27,200 644E-42 $305 $915 $2,745 Lull, 6,000# capacity 42 landing

3 Lifting & Hoisting Telehandlers Operating G5-19A $215 $645 $1,935 JLG, 5,000# capacity 19 lift height 14,000 G12-55 $444 $1,365 $4,095 JLG, 12,000# capacity 55 lift height 35, $250 $750 $2,250 SkyTrak, 6,000# capacity 36 lift height 20, $275 $825 $2,475 SkyTrak, 6,000# capacity 42 lift height 23, $300 $900 $2,700 SkyTrak, 8,000# capacity 42 lift height 25, $335 $1,005 $3,015 SkyTrak, 10,000# capacity 42 lift height 26, $395 $1,185 $3,555 SkyTrak, 10,000# capacity 54 lift height 27, E-42 $305 $915 $2,745 Lull, 6,000# capacity 42 landing height 25, E-42 $335 $1,005 $3,015 Lull, 9,000# capacity 42 landing height 27, C-54 $425 $1,275 $3,825 Lull, 10,000# capacity 54 landing height 33,000 Telehandler-Attachments Capacity (lb) MWP-4X116 $50 $125 $250 Haugen 4 X 9 6 Work Platform 2,000 MIJ $50 $125 $250 Haugen Adjustable Jib, fork pockets, ,000-6,000 Truss Boom $65 $195 $365 JLG Truss Boom Jib, pin on style, 12 & 15 2,000 MFE-636 $50 $125 $250 Haugen Fork extension, /2 x 5 fork MFSB/MSBT $50 $125 $250 Haugen light material bucket, fork pocket or 960 quick tach. 96 wide Lifting Hook $50 $125 $250 JLG crane hook, fork slots, hook out 24 10,000 MSPR-812 $50 $125 $250 Haugen adjustable spreader bar, ,000-4,000 Portable Tower Cranes Model Day Week Four WK Lift Capacity (lb) Wk Capacity HD40 $595 $1,795 $5, Hook height, radius 8,818 IGO50 $795 $2,595 $7, Hook height, radius 8,818 HDT80 $1,095 $3,395 $9, Hook height, 148 radius 13,223 IGO T130 $1,500 $4,500 $13, Hook height, 164 radius 17,637 SL122-J2 $500 $1,500 $4,500 Potain Tandem Axle Dolly, fits HD40/IGO50 SL122-J3 $750 $2,250 $6,750 Potain Triple Axle Dolly, fits HDT80 *All cranes are load tested after assembly. Transportation, assembly & disassembly are additional. RMS RENTALS RENTAL RATES AND TERMS PAGE 3

Aerial Work Platforms Boom Lifts Operating E300AJP - Narrow $195 $585 $1,755 30 Articulating boom, 36 working height, Electric 15,400 E400AJP - Narrow $225 $675 $1,975 40 Articulating boom, 46

Straight boom, 66 working height 22,750 600A/600AJ $295 $795 $2,375 60 Articulating boom, 66 working height 23,050 600SC $385 $1,150 $3,395 60 Straight boom with full crawler bottom 22,500 660SJ $325

34,300 860SJ $595 $1,785 $4,950 86 Straight boom w/jib, 92 working height 36,400 1250AJP $1,050 $3,150 $9,450 125 Articulating boom w/jib, 131 working height 44,000 1350SJP $1,095 $3,285 $9,855 135

working height Personnel Lifts Model Day Week Four WK Weight/ Capacity (lb) Wk Capacity AWP25 $75 $195 $425 Genie 25 Electric, push around 350 AWP30 $95 $275 $595 Genie 30 Electric, push around 350

4 Aerial Work Platforms Boom Lifts Operating E300AJP - Narrow $195 $585 $1, Articulating boom, 36 working height, Electric 15,400 E400AJP - Narrow $225 $675 $1, Articulating boom, 46 working height, Electric 14, S $215 $650 $1, Straight boom, 46 working height 12, A/450AJ $215 $650 $1, Articulating boom, 51 working height 15, S $295 $795 $2, Straight boom, 66 working height 22, A/600AJ $295 $795 $2, Articulating boom, 66 working height 23, SC $385 $1,150 $3, Straight boom with full crawler bottom 22, SJ $325 $825 $2, Straight boom w/jib, 72 working height 27, S $575 $1,725 $4, Straight boom, 86 working height 33, A/800AJ $575 $1,725 $4, Articulating boom, 86 working height 34, SJ $595 $1,785 $4, Straight boom w/jib, 92 working height 36, AJP $1,050 $3,150 $9, Articulating boom w/jib, 131 working height 44, SJP $1,095 $3,285 $9, Straight boom w/jib, 141 working height 45,000 Note: Glazing packages, half tracks, gensets & sky welders available upon request Scissor Lifts Weight/ Capacity (lb) 1230ES $85 $195 $425 JLG 12 Electric, narrow profile, mast lift, 1,740/ working height 1930ES $85 $195 $475 JLG 19 Electric, narrow profile, 2,750/ working height 2630ES $125 $295 $695 JLG 26 Electric, narrow profile, 4,750/ working height 2646ES $125 $295 $695 JLG 26 Electric, wide stance, 4,770/1, working height 3246ES $145 $435 $875 JLG 32 Electric, wide stance, 4,770/700-1, working height Personnel Lifts Model Day Week Four WK Weight/ Capacity (lb) Wk Capacity AWP25 $75 $195 $425 Genie 25 Electric, push around 350 AWP30 $95 $275 $595 Genie 30 Electric, push around 350 AWP40 $135 $350 $735 Genie 40 Electric, push around 300 * 20 x 22 narrow platforms are available upon request Material Lifts Weight/ Capacity (lb) Wk Capacity SLC18 $70 $195 $425 Genie 2-speed winch, w/fork extensions, 18.6 lift height 307/650 SLC24 $75 $215 $445 Genie 2-speed winch, w/fork extensions, 24 lift height 374/650 GH-3.8 $50 $150 $395 Air powered, 12 6 max height 80/300 GH-5.6 $60 $180 $450 Air powered, 18 4 max height 85/250 PAGE 4 RMS RENTALS RENTAL RATES AND TERMS

Digging & Loading Compact Excavators Operating TB235 $185 $555 $1,665 11 2 dig depth, rubber tracks, ROPS 7,650 TB138FR $195 $585 $1,755 10 11 dig depth, rubber tracks, 0-Swing 8,355 TB250 $275 $825

18,780 Note: Hydraulic thumbs, quick couplers, catalytic mufflers available upon request Compact Excavator Breakers RX4 $115 $460 $1,380 Hydraulic Breaker, 550 Ft. Lbs.

RX8 $150 $600 $1,800 Hydraulic Breaker, 1,000 Ft. Lbs.

6,978 TW50 $225 $675 $2,025 57 HP, 71 bucket, heated cab 8,900 Track Loaders Operating TL230 $285 $855 $2,565 71 HP, 7 9 dump height, 67 bucket 8,609 TL10 $325 $975 $2,925 92 HP, 7 11 dump height, 76

5 Digging & Loading Compact Excavators Operating TB235 $185 $555 $1, dig depth, rubber tracks, ROPS 7,650 TB138FR $195 $585 $1, dig depth, rubber tracks, 0-Swing 8,355 TB250 $275 $825 $2, dig depth, rubber tracks, enclosed cab 10,950 TB153FR $295 $885 $2, dig depth, rubber tracks, 0-Swing 12,681 TB285 $415 $1,245 $3, dig depth, rubber tracks, enclosed cab 18,780 Note: Hydraulic thumbs, quick couplers, catalytic mufflers available upon request Compact Excavator Breakers RX4 $115 $460 $1,380 Hydraulic Breaker, 550 Ft. Lbs. RX6 $130 $520 $1,560 Hydraulic Breaker, 750 Ft. Lbs. RX8 $150 $600 $1,800 Hydraulic Breaker, 1,000 Ft. Lbs. Compact Wheel Loaders Operating WL18 $155 $465 $1, HP, 48 bucket, open ROPS 4,057 WL25 $165 $495 $1, HP, 48 bucket, heated cab 5,556 WL30 $195 $595 $1, HP, 54 bucket, heated cab 6,978 TW50 $225 $675 $2, HP, 71 bucket, heated cab 8,900 Track Loaders Operating TL230 $285 $855 $2, HP, 7 9 dump height, 67 bucket 8,609 TL10 $325 $975 $2, HP, 7 11 dump height, 76 bucket 10,500 TL12 $375 $1,125 $3, HP, 8 dump height, 80 bucket 11,850 Note: Machines are equipped with enclosed cabs w/ac, 2-speed tracks, hydraulic quick couplers and auxilary front hydraulics Loader Attachments Erskine $50 $150 $450 Hydraulic Grapple Bucket, 72 wide Erskine $45 $135 $405 Pallet forks, 48 Erskine $50 $150 $450 Land Plane, 78 RX4 $115 $460 $1,380 Hydraulic breaker, 550 Ft. Lbs. Erskine $115 $460 $1,380 Earth auger with bit, various auger bit sizes available Erskine $250 $1,000 $2,900 Cold Planer Erskine $125 $375 $1,125 Power angle broom, 84 Erskine $125 $375 $1,125 Pick up broom, 84 RMS RENTALS RENTAL RATES AND TERMS PAGE 5

Steel Trench Boxes Trench Shoring C6M420FB $100 $300 $900 4 X 20 flat bottom, 6 wall 24 depth rating 5,703 C6M424FB $120 $360 $1,080 4 X 24 flat bottom, 6 wall, 17 depth rating 6,651 C8M424FB $120

rating 1,474 C3M610SWKE $125 $375 $1,125 6 X 10 knife edge, 3 wall, 13 depth rating 2,039 C3M612SWKE $135 $405 $1,215 6 X 12 knife edge, 3 wall, 10 depth rating 2,381 C8M624FB $150 $450 $1,350 6 X 24

6 Steel Trench Boxes Trench Shoring C6M420FB $100 $300 $900 4 X 20 flat bottom, 6 wall 24 depth rating 5,703 C6M424FB $120 $360 $1,080 4 X 24 flat bottom, 6 wall, 17 depth rating 6,651 C8M424FB $120 $360 $1,080 4 X 24 flat bottom, 8 wall, 24 depth rating 7,418 C8H828FB $150 $450 $1,350 4 X 28 flat bottom, 8 wall, 23 depth rating 9,521 C3M68SWKE $100 $300 $900 6 X 8 knife edge, 3 wall, 19 depth rating 1,474 C3M610SWKE $125 $375 $1,125 6 X 10 knife edge, 3 wall, 13 depth rating 2,039 C3M612SWKE $135 $405 $1,215 6 X 12 knife edge, 3 wall, 10 depth rating 2,381 C8M624FB $150 $450 $1,350 6 X 24 flat bottom, 8 wall, 24 depth rating 10,032 C3M88KE $100 $250 $600 8 x 8 knife edge, 3 wall, 18 depth rating 1,944 C3M810KE $100 $250 $600 8 X 10 knife edge, 3 wall, 13 depth rating 2,252 C4L812KE $115 $260 $720 8 X 12 knife edge, 4 wall, 10 depth rating 4,791 C3M812FB $115 $260 $720 8 X 12 flat bottom, 3 wall, 10 depth rating 2,566 C4L816FB $165 $500 $1,500 8 X 16 flat bottom, 4 wall, 20 depth rating 6,019 C4L816KE $165 $500 $1,500 8 X 16 knife edge, 4 wall, 20 depth rating 6,019 C6M818KE $185 $555 $1,665 8 X 8 knife edge, 6 wall, 32 depth rating 8,800 C4M820FB $200 $600 $1,800 8 X 20 flat bottom, 4 wall, 20 depth rating 8,880 C6M820FB $200 $600 $1,800 8 X 20 flat bottom, 6 wall, 26 depth rating 9,847 C6M820KE $200 $600 $1,800 8 X 20 knife edge, 6 wall, 26 depth rating 9,847 C6H824KE $240 $720 $2,150 8 X 24 knife edge, 6 wall, 26 depth rating 11,589 C8M824FB $240 $720 $2,150 8 X 24 flat bottom, 8 wall, 25 depth rating 12,742 C8M824KE $240 $720 $2,150 8 X 24 knife edge, 8 wall, 25 depth rating 12,742 C8H828KE $300 $900 $2,700 8 X 28 knife edge, 8 wall, 25 depth rating 16,956 C8M1024KE $300 $900 $2, X 24 knife edge, 8 wall, 28 depth rating 15,936 C4M1016KE $200 $600 $1, X 16 knife edge, 4 wall, 21 depth rating 9,141 SPREADER PIPE $20 $55 $250 Set of 4 pipe lengths, available in 3 to 20 lengths C4WT888RC4 $163 $488 $1,465 8 x8 x8 manhole box, 4 wall, 4-sided w/doors 6,169 *Slings and lifting bridles available upon request Guide Frame, Slide Rail Systems and Aluminum Build-A-Shields, custom designed to satisfy your needs - Call for more information. Aluminum Trench Boxes CAP-SAV-8X6 $135 $405 $1,215 8 X 6 flat bottom, 3 wall, 25 depth rating 1,025 CAP-SAV-8X8 $155 $465 $1,395 8 X 8 flat bottom, 3 wall, 21 depth rating 1,305 CAP-SAV-8X10 $165 $495 $1,485 8 X 10 flat bottom, 3 wall, 16 depth rating 1,525 Bedding Boxes, Road Plates CBBS7 $95 $285 $855 7 yard Bedding box, standard 4,953 CBBS9 $115 $345 $1,035 9 yard Bedding box, standard 5,614 CBBS12 $135 $405 $1, yard Bedding box, standard 6,147 RP8X8 $30 $90 $270 8 X 8 Road plate 2,613 RP8X10 $35 $105 $315 8 X 10 Road plate 3,266 RP8X12 $40 $120 $360 8 X 12 Road plate 3,920 RP8X20 $50 $150 $450 8 X 20 Road plate 8,168 PAGE 6 RMS RENTALS RENTAL RATES AND TERMS

Compaction Rammers Operating BS50-2 $65 $185 $495 10 x 13 shoe, Rammer 129 BS60-4 $75 $195 $545 11 x 13 shoe, Rammer 154 Vibrating Plates Operating WP1550A/W $65 $185 $495 20 x 23, optional water

Reversible Plate Compactor 679 BPU5545A $160 $480 $1,440 18 wide, 15 HP, Reversible Plate Compactor 715 DPU6555 $190 $570 $1,710 30 wide, Reversible Plate Compactor 988 Rollers Operating RT82-SC $200

7 Compaction Rammers Operating BS50-2 $65 $185 $ x 13 shoe, Rammer 129 BS60-4 $75 $195 $ x 13 shoe, Rammer 154 Vibrating Plates Operating WP1550A/W $65 $185 $ x 23, optional water tank, Plate Compactor 190 BPU2540A $95 $275 $ wide, Reversible Plate Compactor 309 BPU3050A $100 $300 $ wide, Reversible Plate Compactor 366 BPU4045A $132 $400 $1, wide, 9 HP, Reversible Plate Compactor 679 BPU5545A $160 $480 $1, wide, 15 HP, Reversible Plate Compactor 715 DPU6555 $190 $570 $1, wide, Reversible Plate Compactor 988 Rollers Operating RT82-SC $200 $600 $1, Double Drum Sheepsfoot, Walk Behind 3,247 Roller, remote control, diesel RD12 $145 $435 $1, Smooth Double Drum Roller, gas 2,500 RD15 $175 $525 $1, Smooth Double Drum Roller, diesel 3, $225 $675 $2,025 LeeBoy 44 Smooth Double Drum Roller, diesel 5, $225 $675 $2,025 LeeBoy 9-Tire Asphalt Roller, diesel 5,640 PDB-43 $235 $705 $2,115 Stone 43 Single Padfoot drum roller w/blade, diesel 6,771 PDB-54 $275 $825 $2,500 Stone 54 Single Padfoot drum roller w/blade, diesel 7,275 Concrete/Masonry Concrete Buggies AR-16 $95 $275 $825 Allen 16 Cubic foot, stand-on, gas powered AR-16-LP $120 $360 $1,080 Allen 16 Cubic foot, stand-on, propane powered electric start AR-21 $125 $375 $1,125 Allen 21 Cubic foot, stand-on, gas powered AR-21-LP $150 $450 $1,350 Allen 21 Cubic foot, stand-on, propane powered electric start SC75 $125 $375 $1,125 CanyCom 16 Cubic foot, stand-on, gas powered, rubber track Concrete/Mortar Mixers 65CM NA NA $525 Toro/Stone Cement Mixer, 6 cu ft., 5 HP Honda 95CM NA NA $675 Toro/Stone Cement Mixer, 9 cu ft., 8 HP Honda 655PM NA NA $525 Toro/Stone Paddle Mixer, 6 cu ft., 5 HP Honda 855PM NA NA $660 Toro/Stone Paddle Mixer, 8 cu ft., 8 HP Honda 1285PM NA NA $1,350 Toro/Stone Paddle Mixer, 12 cu ft., 11 HP Honda, gear drive SM1200 NA NA $1,800 Toro/Stone Silo Mixer, 12 cu ft., 13 HP Honda RMS RENTALS RENTAL RATES AND TERMS PAGE 7

Concrete/Masonry Concrete Vibrators/Generators IRFU 45/57 $75 $225 $675 Wacker electric high cycle vibrator, 110 volt M1000/2000/3000 $55 $165 $495 Wacker electric hand held

5 shaft, 1-3/4 head BP50A $75 $225 $675 Oztec backpack vibrator, includes 10 shaft with 1-3/4 head HAG134 $95 $295 $885 ISKCO High cycle gas generator, shafts & heads available

Soff-Cut 6 blade, 1-3/16 max cut depth X150D $100 $300 $900 Soff-Cut 6 decorative blade, 1-3/16 max cut depth X2500 $200 $600 $1,800 Soff-Cut 10 blade, 1-1/2 max cut depth

5H $85 $250 $750 Edco hardscape saw, 14 blade, 9 HP Honda SK14-9H $65 $195 $585 Edco walk behind saw, 14 blade, 13 HP Honda DS18-13H $75 $225 $675 Edco walk behind saw, 18 blade,

Soff-Cut vacuum, 11 HP Honda, 39 gallon capacity Concrete Buckets 413R $65 $135 $375 Gar-Bro 1/2 yard, with side chute, 16 gate, crane hook, 45 diameter and 38 high 427R $65 $175

8 Concrete/Masonry Concrete Vibrators/Generators IRFU 45/57 $75 $225 $675 Wacker electric high cycle vibrator, 110 volt M1000/2000/3000 $55 $165 $495 Wacker electric hand held vibrator, includes shaft w/head PV35A $75 $225 $675 Wacker pole vibrator, 3.5 shaft, 1-3/4 head BP50A $75 $225 $675 Oztec backpack vibrator, includes 10 shaft with 1-3/4 head HAG134 $95 $295 $885 ISKCO High cycle gas generator, shafts & heads available GDP5H $95 $295 $885 MultiQuip High cycle gas generator, shafts & heads available Concrete Saws X50 $45 $135 $405 Soff-Cut handheld, 5 blade, 1 max cut depth X150 $100 $300 $900 Soff-Cut 6 blade, 1-3/16 max cut depth X150D $100 $300 $900 Soff-Cut 6 decorative blade, 1-3/16 max cut depth X2500 $200 $600 $1,800 Soff-Cut 10 blade, 1-1/2 max cut depth GX-4200 $300 $900 $2,700 Soff-Cut 12 or 14 blade, 3 max cut depth HSS14-6.5H $85 $250 $750 Edco hardscape saw, 14 blade, 9 HP Honda SK14-9H $65 $195 $585 Edco walk behind saw, 14 blade, 13 HP Honda DS18-13H $75 $225 $675 Edco walk behind saw, 18 blade, 13 HP Honda C2020 $100 $300 $900 Clipper walk behind saw, 20 blade, 13 HP Honda C6130 $225 $675 $2,025 Clipper walk behind saw, 30 blade, 61 HP Deutz V1000 $125 $375 $1,125 Soff-Cut vacuum, 11 HP Honda, 39 gallon capacity Concrete Buckets 413R $65 $135 $375 Gar-Bro 1/2 yard, with side chute, 16 gate, crane hook, 45 diameter and 38 high 427R $65 $175 $405 Gar-Bro 1 yard, with side chute, 16 gate, crane hook 56 diameter and 46 high 454R $75 $185 $490 Gar-Bro 2 yard, with side chute, 16 gate, crane hook 66 diameter and 58 high 483R $95 $195 $595 Gar-Bro 3 yard, with side chute, 16 gate, crane hook 70 diameter and 59 high SGZ20G-Grout Hog $150 $400 $1,200 3/4 yard, with hose, 11 HP Honda, fork pockets PAGE 8 RMS RENTALS RENTAL RATES AND TERMS

Concrete/Masonry Concrete Trowels PT430 $85 $245 $525 Allen 30 walk behind edger, 5 HP Honda PT436 $85 $245 $525 Allen 36 walk behind edger, 5 HP Honda PT446 $85 $245 $525 Allen 46 walk behind edger,

double ride-on, 44 HP diesel, hydraulic HTXD61 $400 $1,200 $3,500 MultiQuip 8 double ride-on, 55 HP diesel, hydraulic Concrete Floor Preparation Model Day 5-day/wk Four Wk TS-8 $95 $300 $900 Edco

9 Concrete/Masonry Concrete Trowels PT430 $85 $245 $525 Allen 30 walk behind edger, 5 HP Honda PT436 $85 $245 $525 Allen 36 walk behind edger, 5 HP Honda PT446 $85 $245 $525 Allen 46 walk behind edger, 8 HP Honda MP215 $225 $675 $1,895 Allen 6 double ride-on, 27 HP Kohler, mechanical CRT48-31V-E $250 $750 $2,250 Wacker 8 double ride-on, 31 HP Vanguard, electric steer HDX600 $325 $975 $2,925 Allen 8 double ride-on, 44 HP diesel, hydraulic HTXD61 $400 $1,200 $3,500 MultiQuip 8 double ride-on, 55 HP diesel, hydraulic Concrete Floor Preparation Model Day 5-day/wk Four Wk TS-8 $95 $300 $900 Edco Tile Shark floor stripper, 3/4 HP, 110 volt, sq ft hr CPL-8-1.5L $150 $750 $3,000 Edco 8 mini scarifier, 1.5 HP, 110 volt, 8 sq ft hr CPM8-9H $200 $1,000 $4,000 Edco 8 scarifier, 9 HP Honda, 190 lbs, 8 sq ft hr CPM8-5B $200 $1,000 $4.000 Edco 8 scarifier, 5 HP electric, 220 volt, 8 sq ft hr CPU-10FC-20H $300 $1,500 $6,000 Edco 10 scarifier, 20 HP Honda, 530 lbs, 10 sq ft hr TG-7-2L $120 $600 $2,400 Edco 7 turbo grinder, 2 HP electric, 130 lbs, 7 sq ft hr TG7-5.5L $120 $600 $2,400 Edco 7 turbo grinder, 5.5 HP Honda, 120 lbs, 7 sq ft hr TMC-7-2L $120 $600 $2,400 Edco 7 turbo grinder, 2 HP gas, 130 lbs, 7 sq ft hr TG-10 $210 $1,050 $4,200 Edco 10 turbo grinder, 11 HP Honda, 180 lbs, 10 sq ft hr TG-10-5B $210 $1,050 $4,200 Edco 10 turbo grinder, 5 HP electric, 208 lbs, 10 sq ft hr SEC-1.5L $75 $375 $1,500 Edco 10 grinder, single head, 1.5 HP electric,11 sq ft hr 2EC-2B $150 $750 $3,000 Edco 27 grinder, dual head, 1.5 HP electric,11 sq ft hr 2GC-11H $150 $750 $3,000 Edco 27 grinder, dual head, 11 HP Honda, 11 sq ft hr CD-5 $250 $1,250 $5,000 Edco 5-Head Scabbler, pneumatic, 160cfm, 29 sq ft hr TLR-7-11H $275 $1,375 $5,500 Edco traffic line remover, 11 HP, 7x lineal ft per hr VAC-200 $100 $300 $900 Edco vacuum, twin motors, 9 gallon capacity, 2 hose VAC-250 $125 $375 $1,125 Edco vacuum, triple electric motors, 9 gallon capacity, 3 hose 2000 $600 $1,800 $5,400 Innovatech terminator, LP, ride on floor stripper Concrete Screeds P35A* $85 $245 $750 Wacker single head screed, 10,12,14,16 board, 4-stroke Honda Magic Screed* $100 $300 $900 Allen single head screed, 10,12,14,16 board, battery powered Screed Demon* $150 $300 $900 MBW Dual headed screed, 24 board Truss Screed $13/ft $39/ft $117/ft MBW vibratory alum. truss screed, w/hydraulic winches, 50 total length available Copperhead $595 $1,595 $4,495 Somero laser screed, walk behind, 10 wide *Indicates Handheld RMS RENTALS RENTAL RATES AND TERMS PAGE 9

GENERAL EQUIPMENT Generators, Light Plants GV3800A $45 $125 $375 3800 watts, 8 HP Honda GV5600A $55 $165 $495 5600 watts, 11 HP Honda GP6600A $75 $225 $675 6600 watts, 11 HP Honda G25 $145 $495

G85 $245 $735 $1,995 67 kw, diesel powered, trailer mount w/brakes, 69 db G100 $250 $750 $2,100 88 kw, diesel powered, trailer mount w/brakes, 69 db G125 $265 $795 $2,295 98 kw, diesel powered,

Note: Rates for above generators and light plants are based on single shift use. Double time (2 shifts) = rate X 1.

$900 16,000# GVWR, tandem axle Air Compressor, Portable XAS185JD $95 $285 $795 Atlas Copco 185 CFM, diesel powered, towable XAS300DD $140 $420 $1,260 Atlas Copco 290 CFM, diesel powered, towable

10 GENERAL EQUIPMENT Generators, Light Plants GV3800A $45 $125 $ watts, 8 HP Honda GV5600A $55 $165 $ watts, 11 HP Honda GP6600A $75 $225 $ watts, 11 HP Honda G25 $145 $495 $1, kw, diesel powered, trailer mount, 63 db G50 $155 $555 $1, kw, diesel powered, trailer mount w/brakes, 66 db G70 $225 $695 $1, kw, diesel powered, trailer mount w/brakes, 66 db G85 $245 $735 $1, kw, diesel powered, trailer mount w/brakes, 69 db G100 $250 $750 $2, kw, diesel powered, trailer mount w/brakes, 69 db G125 $265 $795 $2, kw, diesel powered, trailer mount w/brakes, 68 db LTN6L $95 $295 $695 4,000 watt light plant, diesel, sound suppressed, 69 db, 6kw LTW8K $125 $375 $1,125 4,000 watt light plant, diesel, sound suppressed, 67 db, 8kw Note: Rates for above generators and light plants are based on single shift use. Double time (2 shifts) = rate X 1.5, Triple time (3 shifts) = rate X 2 Trailers FT6 $75 $225 $675 6,000# GVWR, single axle FT7T $75 $225 $675 8,000# GVWR, single axle FT-10W $85 $255 $765 9,980# GVWR, tandem axle FT14DE $100 $300 $900 16,000# GVWR, tandem axle Air Compressor, Portable XAS185JD $95 $285 $795 Atlas Copco 185 CFM, diesel powered, towable XAS300DD $140 $420 $1,260 Atlas Copco 290 CFM, diesel powered, towable XAS375 $167 $500 $1,500 Atlas Copco 375 CFM, diesel powered, towable XAS756 $335 $1,000 $3,000 Atlas Copco 750 CFM, diesel powered, towable Self Dumping Hoppers Capacity (lb) H-200 $60 $155 $295 Galbreath 2 yard, fork pockets 6,000 H-250 $65 $165 $325 Galbreath 2.5 yard, fork pockets 6,000 H-300 $75 $175 $425 Galbreath 3 yard, fork pockets 5,000 H-400 $85 $185 $445 Galbreath 4 yard, fork pockets 4,000 PAGE 10 RMS RENTALS RENTAL RATES AND TERMS

GENERAL EQUIPMENT Dewatering Pumps PS2 400/500 $45 $190 $570 Submersible pump, 2 D/C, 53-62 GPM, 110V/23 amp PS3 1500 $70 $210 $630 Submersible pump, 3 D/C, 180 GPM, 110V/23 amp, 1 phase PS4 7503HH

5 HP Honda PT 3A $55 $165 $495 Trash pump, 3 D/C, 400 GPM, 8 HP Honda PTS 4V $82 $250 $750 Trash pump, 4 D/C, 705 GPM, 16 HP Vanguard PT 6LT $200 $600 $1,800 Trash pump, 6 D/C, 1300 GPM, 32 HP

40# breaker, 1x4.25 hex 48 CP1230 $45 $180 $425 Chicago Pneumatic 60# breaker, 1-1/8x6 hex 63 CP1240 $50 $200 $475 Chicago Pneumatic 90# breaker, 1x4.

680 round 26 CP0032A $65 $260 $595 Chicago Pneumatic 55# rock drill, 7/8x3.25 54 CP0032A $65 $260 $595 Chicago Pneumatic 55# rock drill, 1x4.

11 GENERAL EQUIPMENT Dewatering Pumps PS2 400/500 $45 $190 $570 Submersible pump, 2 D/C, GPM, 110V/23 amp PS $70 $210 $630 Submersible pump, 3 D/C, 180 GPM, 110V/23 amp, 1 phase PS4 7503HH $150 $450 $1,350 Submersible pump, 4 D/C, 349 GPM, 220V/25 amp, 3 phase PT 2A $45 $135 $405 Trash pump, 2 D/C, 210 GPM, 5.5 HP Honda PT 3A $55 $165 $495 Trash pump, 3 D/C, 400 GPM, 8 HP Honda PTS 4V $82 $250 $750 Trash pump, 4 D/C, 705 GPM, 16 HP Vanguard PT 6LT $200 $600 $1,800 Trash pump, 6 D/C, 1300 GPM, 32 HP Lomdardini diesel 16D60 $290 $870 $2,610 Trash pump, 6 D/C, 1200 GPM, 55 HP Deutz diesel Note: Discharge & Suction hose is rented separately Hand Held Tools CFM CP1210 $35 $160 $395 Chicago Pneumatic 40# breaker, 1x4.25 hex 48 CP1230 $45 $180 $425 Chicago Pneumatic 60# breaker, 1-1/8x6 hex 63 CP1240 $50 $200 $475 Chicago Pneumatic 90# breaker, 1x4.25 hex 81 CP4608 $35 $160 $395 Chicago Pneumatic 30# rivet buster,.890 taper 45 CP4130 $30 $120 $295 Chicago Pneumatic chipping hammer,.680 round 26 CP0032A $65 $260 $595 Chicago Pneumatic 55# rock drill, 7/8x CP0032A $65 $260 $595 Chicago Pneumatic 55# rock drill, 1x CO0069 $75 $295 $645 Chicago Pneumatic 60# gas breaker 1x BH65 $85 $340 $795 Wacker 60# gas breaker, 1-1/8x6 hex EH27 $65 $260 $595 Wacker 60# electric breaker, 1-1/8 hex 115-volt EHB7M $45 $145 $395 Wacker 16# electric hammer drill, SDS max 115-volt EHB11BLM $55 $165 $495 Wacker 25# electric rotary hammer, SDS max 115-volt Industrial Fork Lifts Operating FG25 $120 $360 $1,050 Komatsu 5000# capacity, 15 lift height 8,000 Pavers Pavers Operating 1000 $570 $1,725 $5,175 Driveway paver, hopper style, 8-13 screed 10, $725 $2,175 $6,525 Path paver, 5 to 9 heated & vibratory screed 12, /8515 $950 $2,850 $8,550 Driveway/parking lot paver, 8-15 legend screed 17,200 RMS RENTALS RENTAL RATES AND TERMS PAGE 11

12 TRAINING RMS Rentals offers certified training programs for Telehandlers, Aerial Work Platforms & Trench Shoring. Training courses involve both classroom and practical training and can accomodate small and large groups. For more information or to schedule a training, please contact our offices at ABOUT RMS RENTALS RMS Rentals was started by Road Machinery & Supplies in 1999 with the goal to be a one-stop shop for customers in the General Construction industry. RMS Rentals offers a full line of products backed by service and parts support. Our manufacturers products are well known for their high quality and performance, including Lull and SkyTrak telehandlers, Takeuchi Manufacturing line of compact construction equipment, Potain self erecting tower cranes as well as Wacker, Cerda, LeeBoy and many more. Under the guidance of Mark Rossi, General Manager, RMS Rentals provides customers with peace of mind. Its parent company, Road Machinery & Supplies Co., has a tradition of stability and a reputation for customer service. This tradition is extended to RMS Rentals. All of the equipment is serviced properly before going out to a customer. In addition, our service technicians are dedicated to the general and light equipment to keep it running on the job. SALES/RENTALS PARTS SERVICE RMS HYDRAULICS Jeff Sisk JSisk@rmseq.com Bob Ciardelli BCiardelli@rmseq.com Tim Rients TRients@rmseq.com Brian Gaul BGaul@rmseq.com Ken Carlson KCarlson@rmseq.com Rich Giese RGiese@rmseq.com (952) (800)

Rental Rates (952) (800) Quentin Ave. So. Suite 100 Savage, MN 55378

Rental Rates (952) (800) Quentin Ave. So. Suite 100 Savage, MN 55378 Rental Rates 12520 Quentin Ave. So. Suite 100 Savage, MN 55378 (952) 895-7033 (800) 888-9515 WWW.RMSRENTALS.COM 2012 Rental Terms & Policies 1. Credit - All rentals require a customer to have an open account