Jacks & Couplers FIFTH WHEELS KING PINS A-FRAMES SQUARE A-FRAME JACKS

Transcription

1 FIFTH WHEELS Combination Fifth Wheel and Gooseneck Hitch The FIREHAWK II was designed from the ground up provide you with the ability to haul either a fifth type trailer (RV) or a gooseneck type trailer (utility). Take out two hitch pins and remove the fifth wheel head unit and the FIREHAWK II converts from a 23,000 pound fifth wheel hitch to a 23,000 pound gooseneck hitch Complete Firehawk Hitch (A, B & C) Fire Hawk Head Unit (A) GooseNeck Base Unit (B) Installation Base Plate (C) KING PINS The Buyers King Pins are forged from AISI 8630 steel and heat treated to create and maintain a hardness of BHN (this makes them easier to weld) SAE King Pin (Weld On) (Refer to Appendix) KP KPT-809BF 2.00 X.500 KPT-809BF 19-KPT-809CF 2.00 X.250 KPT-809CF 19-KPT-809EF 2.00 X.312 KPT-809EF 19-KPT-809F 2.00 X.375 KPT-809F 19-KPT X.375 KPT KPT-847B 3.50 X.500 KPT-847B 19-KPT X.375 KPT KPT X.375 PT KPT847-BF 3.50 X.50 KPT847-BF 19-KP-0412 Mushroom Style 2 Kingpin & Housing H2KP KP-0413 Mushroom Style 3.5 Kingpin & Housing H2KP-0413 A-FRAMES SQUARE HB Square TW Jack 3.5 K 15 Travel A-FRAME JACKS A- Frame Jack - Plate Not Included (5K), 14 Travel Height 19 80

2 A-FRAME JACKS This A-Frame Jack has a triangular mounting bracket for easy bolt-on or weld-on mounting through coupler or bracket systems. Casters or feet can easily be installed with the unique lock-in key slot. Jack mounting bolts are free with the jack, ask your Nuera Transport salesperson A-Frame Top Wind Jack (1K) (Refer to Appendix) A-Frame Top Wind Jack (5K) (Refer to Appendix) A-Frame Top Wind Jack (2K) (Refer to Appendix) A Replacement Handle Only A-Frame Side Wind Jack (2K), Atwood S A-Frame Side Wind Jack (2K), Shelby A-Frame Top Wind Jack (5K), Travel Plate Height S A-Frame Side Wind Jack (1K), 22 Plate Height A-Frame Side Wind Jack (2K), 21 Plate Height A-Frame Side Wind Jack (3K), 22.6 Plate Height B A-Frame Top Wind Jack (2K) - Standard Height TJD-2000-B LB A-Frame Top Wind Jack (2K) Bracket Height TJA A-Frame Top Wind Jack (5K) - Standard Height TJA-5000 Easy cranking 8 turns per inch, dependable lift and side load capacity, extra thick A-frame mounting bracket (weld-on or bolt-on), 15 of travel A-Frame Top Wind Jack (2K) (Refer to Appendix) A-Frame Top Wind Jack (5K) (Refer to Appendix) A-Frame Top Wind Jack (2K) 5.5 Bracket Height A-Frame Top Wind Jack (2K) with Steel Wheel Economy jack 2k capacity, 14 travel (Fulton) B1 EA2000 SWIVEL JACK I Marine Swivel Jack with Wheel (1K) (RAM) MJ1000B Swivel Jack and Wheel lb (Atwood) QT TS Kickstand and Wheel lb (Fulton) FL TS Swivel Jack and Wheel lb (Fulton) TJ 600T Swivel Jack and Wheel - (1.5K) (Fulton) XP Swivel Jack and Wheel lb (Fulton) TJ50J Swivel Jack and Wheel - (1K) (Fulton) XP Swivel Jack and Wheel - Double Wheel (1.5K) (Fulton) XPD15L 81

3 JACK BOTTOM SUPPORT PLATE When welded under the A-frame of the trailer tongue, this plate provides extra support to keep the jack from bending the coupler Bottom Support Plate (5K) (Refer to Appendix) SPB Support Plate for A-frame Jack Tube, Hole (1K) QT Support Plate for A-frame Jack Tube, Hole (2-5K) QT Easy cranking 8 turns per inch Smooth, comfortable, ergonomic design Dependable vertical and side load capacity Proven reliability for long term use at rated loads Precision fitted parts for extra stability Painted outer tube, zinc plated inner tube K Top Wind Jack w/bracket Mount (10 Travel) (Refer to Appendix) K Top Wind Jack w/bracket Mount (15 Travel) Snap Ring Replacement Part Only L Bracket Replacement Part Only Top Wind Handle Kit Only /2 Pull Pin (fits all BullDog Jacks) K Sinde Wind Bracket Mount (10 Travel) K Top Wind Bracket Kit Top Wind (10 Travel) (7K) QT Side Wind (10 Travel) (7K) QT Top Wind (15 Travel) (7K) QT Side Wind (15 Travel) (7K) QT Sidewind (10" Travel) (2K) B Topwind (10 Travel) (5 K) B JACK FOOT Jack Foot Length Jack Foot Length Jack Foot with Pin, Shelby F2000 Jack Foot Plate FL F Tall Jack Foot 8.9 for 2 Tube B Rack Post/Foot QT Jack Foot with hardware, Cequint FP Cequent Disc Foot Hardware 4,25 X 2 RAM jack feet, with convenient "twist-lock", provide easy attachment to the jack and quick removal for towing. They mount on all Atwood A-Frame jacks and jack screws L Ram Jack Foot - Long (Refer to Appendix) JF S Ram Jack Foot - Short (Refer to Appendix) JF

4 JACK FOOT Jack Foot (1K) - Short Fits both jack number & (see page #57) CASTER WHEELS Atwood caster wheels, with convenient "twist-lock", provide easy attachment to the jack and quick removal for towing. They mount on all Atwood A-Frame jacks and jack screws Caster Wheel (1K) Fits both jack number & (see page #57 ) Bulldog all-steel removable jack wheel Steel Caster Wheel (1K) Poly Cast Wheel (750 lbs.) Rack Post and Wheel QT CE Jack fitting 2 OD Jacks FL CE W Plastic Wheel 6 GEARBOXES Part # Item# Description Mfg. # A Features an L-bend bracket that welds to side and bottom of tongue QT B This gearbox crank welds or bolts to an A-frame tongue QT 165 GEAR AND BEARING KITS K Side Wind Bulldog Jack Crank and Gear Kit K Side Wind Bulldog Jack Gear Kit K Side Wind Bulldog Jack Gear Kit K Thrust Bearing Kit K Thrust Bearing Kit K Thrust Bearing Kit BB Mounting Bracket Kit PC Holding Pin, Clip and Chain BH-1 Handle for B BC Top Cap for B BG Gear Kit for B B Handle for B BTB Bearing Thrust for B B 2K Top Wind Jack w/bracket Mount (10 Travel)

5 Easy cranking 8 turns per inch Smooth, comfortable, ergonomic design Dependable vertical and side load capacity Proven reliability for long term use at rated loads Precision fitted parts for extra stability Painted outer tube, zinc plated inner tube K Side Wind Jack w/pipe Mount (15 Travel) (Refer to Appendix) K Side Wind Jack w/pipe Mount (10 Travel) (Refer to Appendix K Side Wind Jack w/pipe Mount (15 Travel) (Refer to Appendix Side Wind Handle Kit Only Pin & Chain Assembly Replacement Part Only, 5K, 5/ K Side Wind Jack w/pipe Mount (10 Travel) C Pin & Chain Assembly, 2K, 9/ K Top Wind Jack w/pipe Mount (10 Travel) (Refer to Appendix) K Top Wind Jack w/pipe Mount (15 Travel) (Refer to Appendix) K Top Wind Jack w/pipe Mount (10 Travel) (Refer to Appendix) K Top Wind Jack w/pipe Mount (15 Travel) (Refer to Appendix) This male mounting tube is used to mount any of the Hammerblow (Bulldog) tube mount jacks. See previous page for applicable jacks Male Mounting Tube The picture shows both the gear box and mounting plate. You must order both part numbers if you want a complete assembly Gear Box Only Mounting Plate Only Smooth-cranking 4 turns per inch of travel Powerful heavy duty gear box Extra heavy duty gauge post for maximum side load strength Specially designed gusseted caster bracket for increased stability Self-lubricating grease fitting Weather resistant yellow zinc plated rack post Red oxide primer painted steel wheel and gear box Jack Post w/poly Wheel - Only (750 lbs) Jack Post w/steel Wheel - Only - Heavy Duty (1200 lbs) Gear box - Only (Refer to Appendix)

6 Welds to side and bottom of tongue. For use with rack and wheel (see page # 84) Weld-on Gear Box Only Atwood Bolt Swivel Jacks are designed to allow the jack tube to swing easily from its horizontal transit position to the vertical stationery position, locking securely into place with a solid ½" diameter spring-loaded pin. The bolt design of the swivel firmly holds the jack against the mounting bracket, substantially reducing the side-to-side wobble and virtually eliminating the annoying chatter during travel. Requires either mounting bracket or (see next section) Atwood Side Crank, Swivel Jack w/wheel (500lbs) (Refer to Appendix) Atwood Top Crank, Swivel Jack w/wheel (500lbs) (Refer to Appendix) MOUNTING PLATES Used with Atwood Jack # s & (see previous section) Atwood Weld-On Mounting Bracket Swivel Jack Snap RIng Used with Atwood Jack # s & (see previous section) Atwood Bolt-On Mounting Bracket Note: May also work with other side mount jacks (i.e on page #59 ) ATWOOD STABILIZER JACKS - Lifts 650 lbs. / Holds 1000 lbs. - Retracted Swing away storage - Jack Rod Not Included Atwood Stabilizer Jack (17.75 Extended) Atwood Stabilizer Jack (21.75 Extended) JR Jack Rod for Atwood Stabilizer Jack P Jack Foot for Atwood Stabilizer Jack Atwood Stabilizer Jack (retracted height 11 ) QT Scissor Jack, 5K (24 Extended) H Handle for Scissor Jack 5740H TJ01 Domar Stabillizer Jack Picture not available. 85