Hitches. Hitches Conversion Bushing (1 to 3/4 ) Conversion Bushing (1 1/4 to 1 ) 16005
|
|
- Jasmine Potter
- 6 years ago
- Views:
Transcription
1 PUTNAM HI-RISE TRAILER BALLS Part # Size Dia. Length Finish Capacity Hi-Rise /16 1 3/8 3 1/4 Raw 30,000 lbs /16 1 1/4 2 1/4 Raw 5,000 lbs /16 1 1/2 2 3/4 Raw 30,000 lbs C 2" Collar Raw /16" Raw 30,000 lbs /16" 2-3/16 - Raw 30,000 lbs. ADAPT-A-BALL All balls rated at 8,000 lbs. Replacement balls in stock too Adapt-a-Ball Shank w/ 1 7/8, 2 & 2 5/16 Chrome Balls Adapt-a-Ball Extra Long Shank w/ 1 7/8, 2 & 2 5/16 Chrome Balls P Adapt-a-Ball w/1 7/8, 2 & 3/ P Adapt-a-Ball w/1 7/8, 2 & P Adapt-a-Ball w/1 7/8, 2 5/16 & 1 CONVERSION BUSHING Used with a ball mount to fit a 3/4 shanked ball in a 1 hole Conversion Bushing (1 to 3/4 ) Conversion Bushing (1 1/4 to 1 ) RIGID PINTLE HOOKS Capacity: 2,400 lbs. maximum vertical load,12,000 lbs. M.G.T.W. Description: Single piece drop forged lower jaw. Drawbar Eye Dimensions: 2-1/2" to 3" up to 1-9/16 cross section Ball / Pintle Hook Combo (12K rating) RM / 16 Ball / Pintle Hook Combo (12K rating) RM PH30 A- Versatile, 2 to 3 ID with 1.25 Diameter 30k H3 PH30 17-PHT60AL B- Versatile, 2 to 3 ID with 1.25 Diameter 10k H3 PHT60AL 17-PHT60AOL8 B- Limited Quantity Replaced by PH30 30k H3 PHT60AOL8 340
2 Part # A B C E Shank Capacity Ball Mfg. # / / 4 1 /2 4 3 / / 8 Hook - 16K 2 BH82000 Ball - 10K / / 4 1 / / 8 Hook - 16K 2 5 / 16 BH82516 Ball - 10K RIGID PINTLE HOOKS Capacity: 3,000 lbs. maximum vertical load,16,000 lbs. M.G.T.W. Description: Drop forged combination pintle hook/ball hitch. Forged steel ball. Interchangeable hitch balls. Drawbar Eye Dimensions: 2-1/2" to 3" up to 1-9/16 cross section. Replacement Parts /8 Replacement Balls RB Replacement Ball (for shown above) RB / 16 Replacement Ball (for shown above) RB Clip w/chain P11C Mounting Hardware (4 bolts, 4 nuts, 4 washers - grade 8) 8520 B A C Hole Size Note: A & B measurements are center of hole to center of hole S E Capacity: 6,000 lbs. maximum vertical load, 30,000 lbs. M.G.T.W. Description: Drop forged alloy steel rigid type pintle hook. Drawbar Eye Dimensions: 2" to 3" I.D. with 1-1/4" to 1-5/8" diameter section Part # A B C E Shank Capacity Ball Mfg. # / / 4 1 /2 n/a n/a 30K n/a Refer to Appendix) PH / / 4 1 /2 n/a n/a 10K n/a Refer to Appendix) PH Mounting Hardware (4 bolts, 4 nuts, 4 washers - grade 8) 8520 A B C Hole Size Pintle Hook 2 x 3 40k Pintle Hook 2 3/8 x 3 90k A Pintle Hook 2 3/8 x 2 5/8 90k AC Brake Chamber for A COMBO HITCHES &REPLACEMENT BALLS Part # Description Capacity Ball Mfg. # 17-PHT60AOL8 A- 10-Ton Combo 20K 2 BY BH BH A- 10-Ton Combo 20K 2.5 BY BH C- Pintle Hook 12K 2 5/16 HI PH16B D- Duple 19k 2" H3 PH16B 17-PH16BA D- Duplex 19k 2 5/16 DH3 PH16BA 17-RB E-10 Ton Rplcmt. Ball BY RB E- 2 x 1 Chrome Ball 6K 2 HI E- Rplcmt. Ball 2 HI E- Rplcmt.Ball 2 5/16 HI
3 AIR CUSHIONED PINTLE HOOKS 17-PH210RA11 A-Pintle Hook & Chamber Assembly 90k H3 PH210RA11 17-PH210NA11 A- Pintle Hook Only 90k H3 PH210NA11 17-PH300 B- Pintle Hook & Chamber Assembly 72k H3 PH PH310RN11 B- Pintle Hook Only 72k H3 PH XA A,B,C- Air Chamber 90k-100k H3 XA SWIVEL PINTLE HOOKS 17-PHT60AOSL8 A-Swivel Type 18k H3 PHT60AOSL8 17-PHT90A B- Swivel Pintle (Light Duty) 20k H3 PHT90A 17-PHT100A B- Swivel Pintle (Heavy Duty) 20k H3 PHT100A 17-PH760 C- Swivel Pintle 49k H3 PH760 PINTLE HOOK LOCK Aluminum drawbar lock fits 2-1/2 and 3 eye sizes. BY TL-60 Padlock not included. PINTLE RINGS Pintle Ring Assembly 12K (Refer to Appendix) B HD Pintle Ring Assembly 20K Adj. W For Use with 3 adjustable pintle (p/n ) Hole Leveler Channel (Refer to Appendix) Hole Leveler Channel w/gussets B Hole Leveler Channel w/o Gussets B
4 Coupler head and pintle ring require 2 bolts for attachments PINTLE RINGS Hitch Bolts w/ Nuts (Titan Brand) Hitch Bolts w/ Nuts Capacity: 1,000 lbs. maximum vertical load 10,000 lbs. M.G.T.W. Description: C1020 steel forged drawbar, 2.5" I.D. ring Wallace Forge Weld-on Pintle Ring Buyers Weld-on Pintle Ring (Refer to Appendix) LW / 2 I.D. Eye w/ 1 1 / 4 Diameter Section - 7,000 lbs Max. Vertical Load (tongue) - 35,000 lbs. Max Gross Trailer Weight 500 lbs., and the max gross trailer weight is 50,000 lbs Bolt Pintle Ring (17 TON) (Refer to Appendix) DB I.D. Eye w/ 1 5 / 8 Diameter Section - 15,000 lbs Max. Vertical Load (tongue) - 60,000 lbs. Max Gross Trailer Weight Bolt Pintle Ring (30 TON) (Refer to Appendix) DB Draw Bar w/ Washer, Nut, & Cotter Pin - 3 I.D. Eye w/ 1 5 / 8 Diameter Section - 2 O.D. Shank - 9,000 lbs. Max. Vertical Load (tongue) - 45,000 lbs. Max. Gross Trailer Weight 500 lbs., and the max gross trailer weight is 85,000 lbs Lunette Eye Pintle Ring (Refer to Appendix) DB H Adjustable 20K Pintle Ring - 4 K Vertical 2 1/2 Eye, 5 1/2 Ext. Dia S Adjustable 22K Pintle Ring K Vertical Load, 3 Eye, 6 1/4 Ext. Dia. - Draw Bar w/ Washer, Nut, & Cotter Pin / 2 I.D. Eye w/ 1 1 / 2 x 1 1 / 4 Oval Section - 3,000 lbs. Max. Vertical Load (tongue) 15,000 lbs. Max. Gross Trailer Weight 500 lbs., and the max gross trailer weight is 50,000 lbs Rigid Mount Pintle Ring (7 TON) (Refer to Appendix) DB
5 PINTLE RINGS Part # Item # Description Capacity Mfg. # 17-H3PHT60AOSL8 A Swivel Type 18k H3 PHT60AOSL8 17-PHT90A B Swivel Pintle (Light Duty) 20k H3 PHT90A 17-PHT100A B Swivel Pintle (Heavy Duty) 20k H3 PHT100A 17-PH760 C Swivel Pintle 49k H3 PH DB C 3 Rigid Mount Bolt-on Eye-17 lenth45kh3 DB DB-100FQ1 D 3 Bolt-on Eye 100k H3 DB-100FQ K E 3 Adjustable Eye Assembly BY B DB-1422 H A-frame Weld-on 90k H3 DB DB K Rectangular shank/plate 20k H3 DB DB1238 K Rectangular shank/plate 22k H3 DB1238 EYE RING 17-LW /8 Lunette Eye RIng BY LW847 TOW HOOKS 34-B2801A Tow Hook / Pair - 3 Hole Hook (not pictured) BY B2801A 17-TH-0681 Tow Hook LH H3 TH-1257-AL 17-TH-0681 Tow Hook RH H3 TH-1257-AR TOW SHACKLES 17-TH-0681 Tow Shackle H3 TH TH850 Tow Shackle H3 TH
CATALOG AND SELECTION GUIDE. Pintle Hooks Couplers Drawbars Tow Hooks Tow Shackle
COUPLER PRODUCTS CATALOG AND SELECTION GUIDE Pintle Hooks Couplers Drawbars Tow Hooks Tow Shackle The Holland Group, Inc. is an internationally recognized leader in the design, manufacturing, and distribution
More informationQuality Since Product Catalog King Pins, Pintle Hooks, Drawbar Eyes Manufactured in the United States
Quality Since 1942 Product Catalog 2013 King Pins, Pintle Hooks, Drawbar Eyes Manufactured in the United States Since 1942, Wallace Forge Company has been developing quality products in the trucking industry
More informationSELECTING THE RIGHT BALL MOUNT & HITCH BALL
SELECTING THE RIGHT BALL MOUNT & HITCH BALL LENGTH Distance from the center of the ball hole to the center of the pin hole selecting the right ball mount Tow vehicle and trailer level Trailer not level
More informationQuality Since King Pins, Pintle Hooks, Drawbar Eyes Manufactured in the United States
Quality Since 1942 King Pins, Pintle Hooks, Drawbar Eyes Manufactured in the United States Since 1942, Wallace Forge Company has been developing quality products in the trucking industry to satisfy our
More informationSELECTING THE RIGHT BALL MOUNT & HITCH BALL
SELECTING THE RIGHT BALL MOUNT & HITCH BALL LENGTH Distance from the center of the ball hole to the center of the pin hole selecting the right ball mount Tow vehicle and trailer level Trailer not level
More informationCLASS 3 Round Tube - Up to 6,000 WC 10,000 WD 2" Receiver Square Tube - Up to 8,000 WC. 12,000 WD 2" Receiver
TRAILER HITCHES WeatherTite construction prevents rusting from the inside out by sealing the main body Durable powder coat finish resists rust & corrosion Open back end on receiver for easy cleaning Step
More informationHOLLAND COUPLING PRODUCTS
2010-11 HOLLAND COUPLING PRODUCTS PINTLE HOOK, COUPLER AND DRAWBAR CATALOG AND SPECIFICATION GUIDE YOUR COMPLETE SOURCE FOR COMMERCIAL VEHICLE PRODUCT SOLUTIONS In 2006, two industrial icons merged to
More informationBrake Actuation Systems. Brake BREAKAWAY KITS HYDRAULIC SURGE COUPLER
Systems BREAKAWAY KITS 20-236-7 Dexter s 9 amp breakaway kit features a rechargecable, sealed 34-285-00 maintenance-free battery and charger, for double free towing. The kit is compact in design and exceeds
More informationHITCHES, TOWING & ACCESSORIES SECTION
HITCHES, TOWING & ACCESSORIES SECTION HITCHES, TOWING & ACCESSORIES CONTENTS HITCH BALLS.... 146 BALL MOUNTS....147-149 HITCH PINS & LOCKS.... 150 HITCH ACCESSORIES.... 151 HITCH MOUNTED ACCESSORIES....
More informationStandard 2" Ball Mounts
Standard 2" Ball Mounts Tubular Ball Mounts Loaded Ball Mounts HMT202 HMT272 1" ball hole Uses 5 /8" pin & clip (not included) Tongue Weight is 10% of capacity HMT202XL Heavy duty Black Powder Coated tubular
More informationLYNCH PINS A B C ITEM # IN. MM. IN. MM. IN. MM.
Page 1 LYNCH PINS A B C ITEM # IN. MM. IN. MM. IN. MM. 385501 3/16 4 1-1/8 28 13/8 35 385502 1/4 6 1-7/16 36.5 1-3/4 44.5 385503 5/16 8 1-7/16 36.5 1-3/4 44.5 385505 3/8 1-3/4 385507 7/16 11 1-13/32 36
More informationTrailer Hitches & Towing Accessories. Products Company. Towing Products Since 1938
Trailer Hitches & Towing Accessories Products Company Towing Products Since 1938 Table of Contents Accessories... 17-18 Adjustable Ball Mounts... 15 Ball Mounts... 11-12 Ball Mount Combo Kits... 13 Ball
More informationCHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70
Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile
More informationTRAI LER & VEHICLE ACC ESSO R I E S
2014 TRAI LER & VEHICLE ACC ESSO R I E S P R E M I E R T O W I N G P R O D U C T S M A N U F A C T U R E R DRAW-TITE GIVES YOU TOP QUALITY IN EVERY HITCH AND RECEIVER WE MAKE: Solid all-welded construction
More informationWEIGHT DISTRIBUTION SYSTEMS
Cequent has been the leader in weight distributing systems for 60 years. Over those years, much has changed within the industries we serve. Tow vehicles and their frames have been made lighter while the
More informationModel 10 Actuator with Leveler Channel. Model 10 Actuator with Leveler Channel and Mounting Channel For 3 Width Tongue
Basic capacity 0,000 lbs. G.V.W.R., 800 lbs. tongue load The Model 0 is demountable when installed with mounting channel for width tongue or may be welded for permanent installation. This actuator is available
More informationINFEED HOPPER COMPONENTS. Parts may not be exactly as shown. Bandit. Copyright 1/12
INFEED HOPPER COMPONENTS 80 INFEED HOPPER COMPONENTS 1. 626-200019 Folding Pan for Infeed Hopper 2 a. 900-4901-83 Folding Pan Spring Lock & Trap Door Lock b. 900-7900-93 Black Rubber Cap (Not Shown) 3
More informationDRAW-TITE CUSTOM BUILT TRAILER HITCHES
DRAW-TITE CUSTOM BUILT TRAILER HITCHES Draw-Tite gives you top quality in every hitch and receiver we make: Solid all-welded construction for maximum strength and safety. Custom built according to manufacturer
More informationJACKS: **A-FRAME **STEMS **SWIVEL **RACK **MARINE **ACCESSORIES BUTLER BUILT * BUTLER TOUGH QUALITY, PERFORMANCE AND DEPENDABILITY FOR 50 YEARS
JACKS: **A-FRAME **STEMS **SWIVEL **RACK **MARINE **ACCESSORIES BUTLER BUILT * BUTLER TOUGH QUALITY, PERFORMANCE AND DEPENDABILITY FOR 50 YEARS PAGE 800-1 A-FRAME JACKS / JACK STEMS Butler A-Frame Jacks
More information11 Ball Mounts Class III/IV Max Frame Mount Kits 2 Ball Mount w/ Pin & Clip Included Class III Ball Mounts
www.brasssalesinc.com 11 Ball Mounts Part # GTW/TW Ball Hole Length Rise Drop Style Price Class III/IV Max Frame Mount Kits 2 Ball Mount w/ Pin & Clip Included 2923 6,000/600 1" 8 1/2" 3/4" 2" 2 2953 6,000/600
More informationA.I.C. Trailer Parts Catalog January 1, 2019
A.I.C. Trailer Parts Catalog January 1, 2019 A.I.C. Replacement Parts is a wholesale supplier of Aftermarket Parts for all types of trailers. People transport anything from household items to huge excavators
More informationLeading the way! Towing & Trailering
Leading the way! Towing & Trailering 2013 TOWING Table of Contents 1 What's NeW 2-3 receiver hitches 6-20 Multi-Fit Receiver Hitches... 6-9 Custom-Fit Receiver Hitches... 10-16 Front Mounted Hitch Receivers....17
More informationWhat are the Different Hitch Classes?
What are the Different Hitch Classes? Class I Class II Class III Class IV Class V Class I hitches are weight carrying (WC) hitches rated up to 2000 lbs. gross trailer weight (GTW) with a maximum trailer
More informationCARGO MANAGEMENT / CARGO CONTROL
B601U B701 B701SM B801A B901 RECESSED & SURFACE MOUNT ROPE RINGS PART NO. DESCRIPTION WORK LOAD BREAK STRENGTH B601U Recessed Rope Ring, Zinc Plated 285 lbs. 850 lbs. Requires 3 dia. mounting hole in 3/8
More informationNAVARA D23 ACCESSORIES
NAVARA D23 ACCESSORIES Ladder Rack Assembly Engineered and designed to enhance the appearance of your vehicle. Front loop constructed from 76mm stainless steel, available in either polished or black powder
More informationTOWING ACCESSORIES. New to CURT towing accessories! 168 TOWING ACCESSORIES CURTMFG.COM CURTMFG TOWING ACCESSORIES
ACCESSORIES ACCESSORIES Scan for live digital version Towing accessories are a great way to increase your sales by encouraging the consumer to buy products along with his or her hitch purchase. Our full
More informationHitch Catalog Pony Express 1065 Tugger
Hitch Catalog 1065 Tugger Warehousing Healthcare & Hospitality Manufacturing Hitch Catalog Revision 1.8 October 7, 2015 RETAIL ERGONOMIC SOLUTIONS MATERIAL HANDLING ERGONOMIC SOLUTIONS HEALTCHARE ERGONOMIC
More informationTRACTOR LINKAGE PARTS
TRACTOR LINKAGE PARTS Dick Jones & Assoc., Inc. PO Box 3835 Cleveland, TN 37320-3835 PHONE: 423-478-2253 FAX: 423-478-2283 sales@djonesa.com TABLE OF CONTENTS Bushings - Lift Arm Reducer T-9 Bushings -Quick
More informationK 1. Locks & Cargo Control SECTION
Pins Universal Ball Coupler Locks Lip Engaging Ball Coupler Locks Total Encasement Ball Coupler Locks Ball Coupler Latch Locks Ball Mount/Receiver Hitch Locks - Barbell Style Ball Mount/Receiver Hitch
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationJACKS & COUPLERS F-1. A-Frame & Swivel Jacks...F-2 - F-7. Drop Leg & H.D. Jacks...F-8 - F-11. Rack Post, Stabilizer, & Electric Jacks...
A-Frame & Swivel Jacks...F-2 - F-7 Drop Leg & H.D. Jacks....F-8 - F-11 Rack Post, Stabilizer, & Electric Jacks....F-12 - F-13 Straight, A-Frame & Adjustable Couplers...F-14 - F-18 Gooseneck Couplers...F-19
More informationNew Items. Recon 5 th wheel Hitch. GEN-Y Rubber Torsion Ball Mounts. Gooseneck Mounted 5 th wheel Hitch. OEM-Compatible GooseBall Kit
New Items GEN-Y Rubber Torsion Ball Mounts Recon 5 th wheel Hitch MADE in USA! HMSG1024 HMSG1225 Fits 2" standard receivers No tools to adjust height Super heavy duty construction Heavy duty rubber torsion-flex
More informationLOAD RATED FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS
LOAD RATED GRADE 316 STAINLESS STEEL FITTINGS STAINLESS STEEL LOAD RATED COMPONENTS HEIGHT SAFETY FITTINGS 37 Taree Street Burleigh QLD 4220 Telephone: (07) 55 935 688 Fax: (07 55 935 872 Email: bridge@bridco.com.au
More informationTOWING CAST COUPLERS BALL MOUNT COMBINATION HITCHES KING PINS HITCH PIN LOCK ADJUSTABLE TRI-BALL
TOWING Our towing equipment is designed and created to the highest industry standards. CAST COUPLERS BALL MOUNT COMBINATION HITCHES KING PINS HITCH PIN LOCK ADJUSTABLE TRI-BALL G TOWING TABLE OF CONTENTS
More informationFLEMING TRAILERS, INC.
T300 Model T314-3 T314-4 T314-5 Deck 6 5 X 14 6 5 X 14 6 5 X 14 Deck Type 2 X 12 Douglas Fir 2 X 12 Douglas Fir 2 X 12 Douglas Fir Deck Height 18 Loaded 18 Loaded 18 Loaded Axles 2-3,500 lb. 2-5,200 lb.
More informationParts & Service Manual
New 2017 Edition Parts & Service Manual SK6, SK7, SK8, SK9 B6DOW, B9DOW (Tridem) B8 & B9DOW (Tandem) ORDER GENUINE General Engines Co., Inc., 548 Swedesboro Ave., Mickleton, NJ 08056 Parts (800) 338-7088
More informationRating when used as a weight carrying hitch without spring bars:
BOLT TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48000 48001 48003 Max Tongue Weight 550 Ibs. 750 Ibs. 100 Ibs. Max Gross Trailer
More informationJacks & Couplers FIFTH WHEELS KING PINS A-FRAMES SQUARE A-FRAME JACKS
FIFTH WHEELS Combination Fifth Wheel and Gooseneck Hitch The FIREHAWK II was designed from the ground up provide you with the ability to haul either a fifth type trailer (RV) or a gooseneck type trailer
More informationREPLACEMENT PARTS WEIGHT DISTRIBUTION SYSTEM SWAY CONTROL FIFTH WHEEL HITCHES REPLACEMENT PARTS
WEIGHT DISTRIBUTION SYSTEM Reese SC Weight Distributing Heavy Duty Trunnion Bar Weight Distributing Heavy Duty Round Bar Weight Distributing Steadi-Flex Light Duty Weight Distributing Heavy Duty Trunnion
More informationCustom Sizing Available
wheel bonnets ratchet & direct snap P/N 80399-7G-32 P/N 80399-7C-32 TWIST SNAP HOOK FLAT HOOK REPLACEMENT BONNET TOP P/N 80099-7G-32 P/N 80099-7C-32 TWIST SNAP HOOK FLAT HOOK auto tie-down straps M&R Auto
More informationSection 21 - Ringfeder 101 AUS Coupling
Section 21 - Ringfeder 101 AUS Coupling Item: Part No: Description: Item: Part No: Description: 2 14991384 TOP GUIDE BUSH 43 12991533 SPLIT PIN 3 14991760 COUPLING BODY 44 14994455 PROTECTOR CAP 4 14991073
More informationUFP PRODUCTS. Unique Functional Products. 1. Actuator. 2. Couplers. 3. Stainless Steel Bearing Protectors, Buddy Brake
1. Actuator 2. Couplers 3. Stainless Steel Bearing Protectors, Buddy Brake 4. Wheel Bearing Kits, Grease Seals 5. Spindo Seal Kits 6. Trailer Buddy Products 7. Hubs & Hub/Drums 8. Disc Brakes 9. Springs
More informationApplications available for most any vehicle from a PT Cruiser to a Peterbuilt 2WD FRONT 2WD REAR
Timbren Suspension 29 years No Drill Installation Great for Towing, Off-Roading, Work Trucks, Plow Trucks, RV's... Applications available for most any vehicle from a PT Cruiser to a Peterbuilt Lifetime
More informationConfigurations & Parts Identification
900 TWS Trailer Suspension Series Configurations & Parts Identification Hutchens Industries Advancing the Practical Application of Suspension Technology Springfield, MO n (00) 654-24 n (41) 62-5012 Fax
More informationOwner s Manual. DB Bolt-On Drawbar. XL-DB20014UM-en-US Rev
Owner s Manual DB-1249-49 Bolt-On Drawbar Installation, Operation and Maintenance Procedures For on/off-road applications Weight: (approx.) 24 lbs. (10.8 kg) For Load Ratings, Refer to Section 3 XL-DB20014UM-en-US
More informationG190 LT-145 (1992) Page 1 of 27 42" Mower Deck
132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119
More informationM REV. D DECEMBER Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns
M-07- REV. D DECEMBER 009 Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 009 LIFT CORP. 9 Slauson Ave. Santa Fe Springs,
More informationWeight Distribution Towing
Weight Distribution Towing HUSKY CENTER LINE Towing System The Center Line Torsion Weight Distribution Hitch and Active Sway Control System is the next generation in towing safety and performance. The
More informationMOBILE MIXERS PARTS MANUAL HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS. Serial number up to
MOBILE MIXERS PARTS MANUAL 405-470 - 540 HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS Serial number up to Harsh International, Inc. 600 Oak Ave. Eaton, CO 80615-0007 (970) 454-2291 Fax: (970) 454-3491
More informationMERCHANDISING PRODUCT DISPLAYS HEADER SIGNS/CARDS / GONDOLA WALLPAPER MERCHANDISING MATERIALS PLANOGRAM LAYOUTS MERCHANDISING
PRODUCT DISPLAYS Hitch Displays Weight Distributing Displays Fifth Wheel Displays Pin Box Displays Gooseneck Hitch Displays Spinner Product Displays Jack Displays Brake Control Displays Mini Light Display
More informationGOOSENECK HITCHES. Advantages of CURT gooseneck hitches 220 GOOSENECK HITCHES CURTMFG.COM GOOSENECK HITCHES
GOOSENECK HITCHES GOOSENECK HITCHES There are trucks that turn the world under their tires and trailers that can move mountains in a day, so what about the hitch powerful enough to make the connection?
More informationPRO SERIES FIFTH WHEEL HITCHES
PRO SERIES FIFTH WHEEL HITCHES The Ultimate Heavy Duty Towing Platform PROFESSIONAL SERIES 15K FIFTH WHEEL HITCH Full 5 degrees of side to side pivot for easy hook-up on uneven ground Round slide bar jaw
More informationSpecialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel
Specialist steel fixtures & fittings 316 (A4) & 304 (A2) Stainless Steel DARAC LTD are a leading industrial supplier of architectural & rigging items under the brand name STEELGEAR. We stock a vast range
More information1 HR-301/D Parts Manual. Table Of Contents
Table Of Contents 301/D Parts Manual 3 Point Hitch...2 Pull-Type Hitch...4 Main Frame...6 Angle Adjuster - Serial Number 44982 & Prior...8 Rotor Assembly - Serial Number 44982 & Prior...10 Rotor Assembly
More informationTrailer Parts. Brake Components. Axle Components. Suspensions. Lights & Electrical. Wheels & Tires. Loading Ramps. Couplers & Safety Chains
Trailer Parts Brake Components Axle Components Suspensions Lights & Electrical Wheels & Tires Loading Ramps Couplers & Safety Chains Trailer Jacks Fenders Dump Trailer Parts Tilt SST Parts Decal Kits Brake
More informationRCI2 SERIES RAKE Parts Breakdown
RCI2 SERIES RAKE Parts Breakdown 03/16/16 1 18 RAKE WHEEL S PAGE 10 RAKE ARM S PAGE 6,7 HYDRAULIC S PAGES 8,9 WARNING DECALS PAGES 12,13 2 WHEEL AND HUB S #3 THRU #13 15 PIVOT S PAGE 4,5 1 16 17 2 POSITION
More informationTrailer Couplers. Straight-Tongue Couplers. Channel-Mount Couplers. Channel Rigid-Mount Coupler. A-frame Tongue Couplers. Plate-Mount Couplers
Trailer Couplers Straight-Tongue Couplers Channel-Mount Couplers TCC247 HATCB30 HATCCL02 HATCC30 HATCA20 1 7 / 8" ball, 2" wide channel, 2,000 lb GTW $9. 95 HATCA25 1 7 / 8" ball, 2½" wide channel, 2,000
More informationARCHIVE BOOK - II AG20-IV / AG14-IV ROTARY FLEX WING MOWER
AG0-IV / AG-IV ROTARY FLEX WING MOWER ARCHIVE BOOK - II By Serial Number / Production Book = Apr. 99 s/n AG0-0300 Jun. 00 AG0-IV Model - 0' Flex Wing Rotary AG-IV Model - ' Flex Wing Rotary COMPLETE PARTS
More informationCHICAGO HARDWARE & FIXTURE COMPANY
CHICAGO HARDWARE & FIXTURE COMPANY Manufacturers of Wire Rope and Cha Fittgs, Industrial and Mare Hardware and Allied Products Sales offices and warehouse stocks are mataed the prcipal cities to enable
More informationNew. Axle Spindles. Universal Tie Plates. Tie Plates. Axle Tie Plate Kits. Includes: nut, washer and cotter pin.
Axle Spindles Spindle Bearing Description Surface Part # 1-1/4 x 7 1 80055 1-1/4 x 7 (a) 1-1/16 80060 1-3/4 x 8-1/4 1-1/16 x 1-3/8 80235 2 x 8-1/4 1-1/16 x 1-3/8 80325 Eliminator, 1,750# (b) 80324 Nut/Washer/Cotter
More informationPackaged Parts Overview
Overview The Nuera product line features the same parts used to build and maintain the highest quality and hardest working trailers in the industry. Manufacturer-grade repair parts and accessories, designed
More information33 COMPACT DISC Ref. No. Part Name Part Number
CONTENTS CONTENTS 33 COMPACT DISC Ref. Part Name Part Number 1 Tire & Rim 168025 2 Disc Axle 401036 3 Plastic End Cap (Pkg. 2) 504090 4 Sealed Bearings & Flanges 504125 5 Bearing Stand Bolt Pkg. (2-U-Bolts)
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationPLATFORM OPTIONS INDEX
EFFECTIVE: MARCH 8, 2017 Cargo/Load Management Options Exterior Options Reciever Hitch CL-V & ICC Bumper 14 Receiver Hitch CL-V Drawbars 14 Receiver Hitch CL-IV & ICC Drawbars 15 ICC Bumper 15 Tailskirt
More informationOPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO METE-R-MATIC III. Top Dresser. Model F12D. Product Number 85423
Model FD OPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO Top Dresser Model FD Product Number U.S. Patents,,;,0,;,0, Other Patents Pending Manual Number Rev B DANGER - IF INCORRECTLY USED THIS MACHINE
More informationWalk-In Tool Trailers 16-foot
Please complete the data fields on pages 3, 4 and 5. Save the form to your computer and email to: hpsliterature@hubbell.com and 20-foot tandem models Walk-In Tool Trailers 16-foot Standard and Optional
More informationF3 Dual Tower Trainer F3DTT
F3AT TOWER BOM (Quantities shown in table on the left are for (1) Tower. Actual quantity per machine is double.) PART NO. QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-0020 1 7/16-14 UNC x 5 Bolt 01-1331
More informationCOMPACT LIGHT TOWERS MODEL WLTT PRODUCT SPECIFICATIONS JANUARY 2019 WSD
WSD-1028 1 2019 COMPACT LIGHT TOWERS MODEL WLTT PRODUCT SPECIFICATIONS JANUARY 2019 Compact Light Towers Page 2 of 13 1. SYSTEM 1.1. Description Wanco Compact Light Towers provide wide-area lighting on
More informationOne Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Front Gauge Wheels Section 4 Model Years 1992 1994... 2-5 Model Years 1995 1996... 6-9 Model Years 1997 Present... 10-11 Front Gauge Wheel Divider 1992 Present...
More informationLEVELLING JACKS INSTALLATION MANUAL AUSTRALIA. Andersen No-Sway Weight Distribution Hitch
INSTALLATION MANUAL AUSTRALIA Andersen No-Sway Weight Distribution Hitch Featuring the patented, super-quiet Anti-Sway and Anti-Bounce TMD (True Motion-Dampening TM ) system 6,000kgs GVM (70mm ball) 4500
More informationE-JECT SYSTEMS PRODUCT LINE E-JECT SYSTEMS PRODUCT LINE
E-JECT SYSTEMS PRODUCT LINE E-JECT SYSTEMS PRODUCT LINE DD030707 WORLD CLASS EARTHMOVING EQUIPMENT E-Ject Systems manufactures several different models of pull scrapers, disk harrows, sheepsfoot rollers,
More informationPARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.
2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at
More informationGeneral Applications. Axle Types. d60 & D70 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 00-000 Lbs. Capacity Complete service manual Precision machined, forged steel spindles Precision machined integral cast iron hub/drums -bolt and bolt (UTG) hubs available
More informationKWIK-LOC TANDEM DOLLIE PARTS MANUAL CRAFTSMEN TRAILER, LLC. 2007
KWIK-LOC TANDEM DOLLIE PARTS MANUAL CRAFTSMEN TRAILER, LLC. 007 6 5 6 4 3 7 8 ITEM QTY. PART NO. DESCRIPTION 66300 HINGE 4 66308 HINGE BUSHING 3 6630 FRONT END 4 6630 EYE 5 66304 EYE BUSHING 6 5 6630 SNAP
More informationSTATE OF MINNESOTA PRICING Page
STATE OF MINNESOTA PRICING Page TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Ziegler Inc. Contact Person: Mark Phillippi, Tim Hoeft Street Address:
More information320 Series Models 325, 326, 327
0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More information2015 RV Booking Terms
2015 RV Booking Flyer Expires May 15, 2015 Choice of Extra Discount Levels: Order 2,500 and receive 5 % off Jobber Order 5,000 + and receive 6.5 % off Jobber Order 10,000 + and receive 8 % off Jobber Order
More informationD-L Quality Features
D-L Quality Features Winches Heat Treated Gears This feature is not visible, but substantially toughens the gears and greatly extends their life. Gears are hardened to Rockwell C 35-40. Welded Reel Gears
More informationWX980 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-983 Fax: (9) 99- www.embmfg.com WX980 Trailer Log Splitter Parts Manual S/N E9US0ES3809 & After 3809 & After Refer to the operators
More informationNew 2017 Edition Parts & Service Manual
New 2017 Edition Parts & Service Manual Table of Contents Page # Standard Model Drawings 2 Trailer Set-Up 4 9-15 Ton Decal Arrangement 6 9-12 Ton Decal List 7 15 Ton Decal List 8 10-12 HA Hub and Drum
More informationTekonsha Push-To-Test Breakaway Kit with Integrated Multi-Stage Charger ( ) Pro Series Push-To-Test Breakaway Kit with Charger ( )
Push-To-Test Breakaway Kit with Integrated Multi-Stage Charger (50-85-313) Pro Series Push-To-Test Breakaway Kit with Charger (50-85-315) For proper performance of a breakaway system, battery must be maintained
More informationEURO REEL
Date Purchased Machine Serial No. Options The key number system in this parts book is arranged as follows: Please order parts by number - Key numbers with two circles denotes main assemblies. - Key numbers
More informationHustler Mini Z Bac Vac Parts Manual
Hustler Mini Z Bac Vac Parts Manual Hustler Turf Equipment P.O. Box 7000 Hesston, Kansas 67062-2097 379263 Rev. 6/06 Table of Contents Chapter General Information.................................... Chapter
More informationBOAT TRAILER PARTS SECTION I
SECTON BOAT TRALER PARTS nformation Boat Guides Pipe Lights Boat Guide Light Bracket Bow Guides Bunkboard Guide On s Short Bunkboard GuideOn s Carpeted Bunk Boards Roller GuidesOn s Bunk Wrap Modular Bunk
More informationSECTION 6 PARTS LIST
SECTION FIGURE NO. DESCRIPTION PAGE NO. -1 - - -4-5 - - -8-9 Oven Panels, Window and Legs Exploded Drawing Air Finger Exploded Drawing Control Panel Exploded Drawing Blower and Shroud Exploded Drawing
More informationBATHROOM HARDWARE. Bathroom Hardware
Bathroom Hardware s... 10-1 to 10-4 Shower Door Guides... 10-4 Shower Door Brackets... 10-5 Shower Door Sweeps... 10-5 Shower Door Latches... 10-5 Shower Door Handles... 10-5 to 10-6 Miscellaneous Shower
More informationSTANDARD DANA REAR ELECTRIC AXLE & BRAKES
37 30 29 31 33 34 36 4 5 6 3 7 9 5 4 8 39 8 4 5 9 21 25 27 23 1 24 21 20 22 30 28 23 26 22 10 12 11 11 13 14 13 1 2 1 15 37 33 31 2 16 34 35 17 36 38 18 19 (10x) 26m 50 62 63 SHOE ID: INKED ID 4070FF 55
More informationTRAILER PARTS DISTRIBUTOR. part #D20110 PLASTIC FENDER Dimensions WxLxH 7.08 x x Price $5.60 PO # Zip CSC. Billing Zip
TRAILER PARTS DISTRIBUTOR part #D20100 Dimensions WxLxH 6.30 x 21.65 x 6.89 part #D20110 Dimensions WxLxH 7.08 x 24.01 x 9.64 part #D20112 Dimensions WxLxH 7.48 x 25.98 x 11.81 Multiple pre-drilled mounting
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More informationPOWER UNIT: (Deere 4045T Tier 4 74HP) In-Line 4 cylinder, 4-cycle, Turbo Diesel. 74 HP (55 KW) Intermittent at 2400 RPM.
GENERAL: This specification describes a self-contained engine-driven vacuum leaf collecting machine. The leaf collector is trailer mounted, designed for one-person operation, and capable of picking up
More information601 N. Broadway Salina, KS Veris MSP3 EC/pH/OM Parts Manual
601 N. Broadway Salina, KS 67401 Veris MSP3 EC/pH/OM Parts Manual MSP3 Sub-Assemblies 2 Table of Contents MSP 3150 Base Unit... 4, 5 Coulter Assembly... 6, 7 ph Sampler... 8-10 Electrode Holder... 11,
More informationPOWER UNIT: (Deere 4045T Tier 4 74HP) In-Line 4 cylinder, 4-cycle, Turbo Diesel. 74 HP (55 KW) Intermittent at 2400 RPM.
GENERAL: This specification describes a self-contained engine-driven vacuum leaf collecting machine. The leaf collector is trailer mounted, designed for one-person operation, and capable of picking up
More informationTrailer Parts. Brake Components. Axle Components. Suspensions. Lights & Electrical. Wheels & Tires. Loading Ramps. Couplers & Safety Chains
Trailer Parts Brake Components Axle Components Suspensions Lights & Electrical Wheels & Tires Loading Ramps Couplers & Safety Chains Trailer Jacks Fenders Dump Trailer Parts Tilt SST Parts Decal Kits Brake
More information2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER
0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions
More informationDRAGLINE CHAIN AND RIGGING
ID QTY DESCRIPTION 76517217 2 76549610 1 76640615 2 76693810 2 4 CHAIN, 29-1 PITCH, WITH XTEND, 1 PEAR END LINK, 1 STUD END LINK / 6 PIN 3-1/2 CHAIN, 26-10 PITCH, 2 PEAR END LINKS 3 CHAIN, 28-10 PITCH,
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationAssembly Instructions for A, A, A, & A
Update Instructions Yield-Pro 1225/1625 Planter Used with: Yield-Pro 1225 Planter Yield-Pro 1625 Planter General Information! When you see this symbol, the subsequent instructions and warnings are serious
More informationModel 580 / 580J Coupling
MANUFACTURING CO. THE FIRST NAME IN QUALITY COUPLINGS Installation, Inspection, Operation & Maintenance Guide Model 580 / 580J Coupling IMPORTANT Read these instructions completely before installing, using
More informationAluminum Railing. Strong, Durable and Maintenance-Free Beauty! Strong, Durable and Maintenance-Free Beauty!
Aluminum Railing Meets OSHA, ADA and ICC Safety Criteria Strong, Durable and Maintenance-Free Beauty! Strong, Durable and Maintenance-Free Beauty! www.superioraluminum.com Strong, Durable, and Maintenance-Free
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODELS: RPM & RPM SECTION: 79
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODELS: -0 RPM & -000 RPM SECTION: 9 0 Griffin Ave. Selma, Al. 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com April, 0 BUSH HOG/ LAND MAINTENANCE
More information