OPEL MOVANO Factory Conversions 2017 Models Edition 1

Transcription

1 OPEL MOVANO Factory Conversions 2017 Models Edition 1

2 STREETS AHEAD OPEL CONVERSIONS. Big on choice and incredibly versatile too: there s a breadth of Opel Conversions that are specifically designed and manufactured for just about any kind of use no matter what the requirement. Our vast range of Movano chassis and crew cabs plus Movano platform cabs provide the ideal base for the vehicle converter. And with front-wheel drive, rear-wheel drive and heavy-duty twin rear-wheel drive variants available there s also one for any kind of operation, no matter how diverse. Completing the factory-based picture are three conversions tipper, dropside and box van models in a number of configurations. So many options, one warranty: all Opel factory conversions carry the full Opel three-year/150,000km warranty on both the chassis and the conversion. Models illustrated left to right: L4 H1 R3500 RWD HD box van with optional wind deflector, L4 H RWD HD crew cab dropside and L2 H1 R3500 RWD HD tipper.

3

4 THE BENEFITS OF FORWARD THINKING. The success of any vehicle conversion stems from the thought put in at the planning stage. All Movano chassis cabs and platform cabs have been engineered to provide a solid base for a host of conversions, with particular emphasis paid to the needs of specialist converters. CONTENTS Movano chassis cabs, crew cabs and platform cab 6 Movano cabin 8 Movano factory conversions 10 Movano Tipper 12 Movano Dropside 14 Movano Box van 16 Movano Specification 18

5 Models illustrated left to right: L2 H2 F3500 platform cab, L2 H1 F3500 chassis cab, L3 H1 R3500 crew cab. All shown fitted with fullsize wheel trims, optional at extra cost. Platform cab also features Convenience Pack, optional at extra cost.

6 MOVANO FLEXIBILITY. Chassis cab, crew cab and platform cab models extend Movano s flexibility still further providing the perfect base for one of three factory-built conversions tipper, dropside or box van. For complete specification and vehicle data, please refer to page 18. L2 H1 F3500 chassis cab illustrated. Chassis cabs Movano chassis cab models feature rugged box section chassis rails, featuring wide top sections with built-in mounting points. The bolted rear under-run bar provides additional in-built safety, as well as ample margins for additional bodywork while retaining outstanding payloads. Three load lengths (L2, L3, L4) Two GVWs (3500kg or 4500kg) Front-wheel drive, rear-wheel drive or heavy-duty twin rear-wheel drive 6 Movano chassis and crew cabs

7 L3 H1 R3500 crew cab illustrated. L2 H2 R3500 platform cab illustrated features full-size wheel trims and Convenience Pack, optional at extra cost. Crew cabs Crew cab models provide the same choice of body configurations and GVWs as our chassis cab variants but introduce an added dose of versatility by providing extra accommodation for four additional crew members. Three load lengths (L2, L3, L4) Two GVWs (3500kg or 4500kg) Front-wheel drive, rear-wheel drive or heavy-duty twin rear-wheel drive Platform cabs Platform cabs are ideal for those conversions requiring a low floor and walk-through access from the cab. The interface panel makes for easy integration of the cab with the conversion body, while an extended-length wiring loom is available to power the rear lights or extended conversions. Two load lengths (L2, L3) Two roof heights (H1, H2) One GVW (3500kg) Front-wheel drive Movano chassis and crew cabs 7

8 MOVANO CABIN. Whatever the nature of your business, the Movano cabin creates both a comfortable and versatile workspace that is completely in tune with your individual and professional needs. A well-equipped driving environment with ample storage features, Movano has it covered. And with digital radio and Bluetooth connectivity as standard you ll also be kept well informed and entertained while on-the-road. 8 Movano cabin

9

10

11 GET ON THE RIGHT FOOT. Our factory-based conversion range includes the Movano tipper, dropside and the box van because no two jobs are the same and no two worksites present the same challenge. That s why these conversions are designed and manufactured to the same exacting standards as all the Movano range featuring real world solutions for maximum payloads and higher GVW s (up to 4500kg) when they re really needed. Plus front-wheel drive and rear-wheel drive with single or heavy-duty twin rear-wheel applications to cover almost every eventuality. And of course, all Movano factory-based conversions carry the full Opel three-year/150,000km warranty on both the chassis and the conversion itself. L3 H1 R3500 HD chassis cab tipper illustrated features tow bar, optional at extra cost. Also available as part of the optional Construction Pack. Movano chassis and crew cabs 11

12

13 MOVANO TIPPER. Particularly suited to the needs of the construction industry, the factory-built Movano tipper features a five-stage chrome-plated underfloor ram and 50 tip angle. The tipping mechanism itself employs a high performance, 2kW electro-hydraulic power pack; the tipping action can be easily operated by one person, using hand-held controls on a wander lead. Choices available: Two load lengths (L2, L3) Two GVWs (3500kg or 4500kg) Front-wheel drive or heavy-duty, twin rear-wheel drive Chassis cab or crew cab models Standard features include:* Tipper platform width 2040mm, length up to 3205mm Steel platform and front panel, hot-dip galvanised and dark grey polyester powder coated Cab protection including ladder frame Remote tipping control with cab-mounted, spiral wander lead Side under-run bars Top and bottom hinged tailboard Double-skinned, anodised aluminium side- and tailboards Gantry lugs for ladder restraint Tipper in action warning buzzer Power pack isolation switch Rear light protection grilles (optional) *Not all features and options are available on every model. Tipper 13

14 L2 H1 F3500 chassis cab dropside illustrated features full-size wheel trims, optional at extra cost.

15 MOVANO DROPSIDE. The Opel-manufactured dropside conversion builds on Movano s inbuilt flexibility with a host of practical additions. The totally flat load platform with a load length of up to 4470mm, low loading height and zero wheel arch intrusion features load restraint lashing eyes and an anti-slip resin finish. Choices available: Three load lengths (L2, L3, L4) Two GVWs (3500kg or 4500kg) Front-wheel drive, rear-wheel drive and heavy-duty twin rear-wheel drive Chassis cab or crew cab models Standard features include:* Steel load platform with resin-coated wooden floor Load platform width 2040mm 400mm high, removable, double-skinned, anodised aluminium side- and tailboards Recessed, retractable lashing eyes in deck perimeter Side under-run bars Cab protection including ladder frame Removable rear ladder rack and toolbox (optional) *Not all features and options are available on every model. Dropside 15

16 MOVANO BOX VAN. With up to 22cu.m of cargo volume available, the factory-built Movano box van is capable of swallowing a huge load with ease. Inside, the strong yet lightweight body features a completely flat, slip-resistant load floor, accessible via twin 270 opening doors or an aluminium roller shutter (optional at extra cost). Choices available: Two load lengths (L3, L4) Two GVWs (3500kg or 4500kg) Front-wheel drive, rear-wheel drive or heavy-duty, twin rear-wheel drive Standard features include:* Aluminium frame with smooth-finished polyester walls and doors Translucent roof Anti-slip floor Three carpet-covered aluminium interior protection strips Loadspace length up to 4580mm Loadspace width 2150mm Interior height 2200mm Twin 270 opening doors Luton head (optional) Aluminium rear roller shutter (optional, illustrated right) Wind deflector (optional) *Not all features and options are available on every model. 16 Box van

17 L4 H1 R3500 HD box van features Luton head, optional at extra cost.

18 MOVANO CHASSIS CAB L2 FWD L2 RWD/L2 RWD HD L3 RWD 2265 (89.2) 2284 (89.9) 2276 (89.6) New Movano Chassis Cab L3 H1 FWD 5643 (222.2) 1119 (44.1) 5643 (222.2) New 1119 Movano Chassis Cab L4 H1 RWD (44.1) 6293 (247.8) 1119 (44.1) L3 FWD L3 RWD HD L4 RWD HD 2070 (81.5) exc. door mirrors 2470 (97.2) inc. door mirrors 2258 (88.9) 2276 (89.6) 2273 (89.5) 6293 (247.8) 1119 (44.1) 6193 (243.8) 1669 (65.7) 6843 (269.4) 1669 (65.7) Dimensions mm (inches). Maximum heights shown (unladen). WEIGHTS KG CHASSIS CAB GVW L2 L3 L FWD* Kerbweight n/a Payload n/a 3500 RWD Kerbweight n/a Payload n/a 3500 RWD HD Kerbweight Payload RWD HD Kerbweight Payload Note: Kerbweights are minimum vehicle kerbweight according to European Type Approval and include all fluids, tools and a 90% fuel load. They will vary according to the vehicle specification (including options and accessories) with a corresponding variation in payload. Kerbweights are also subject to manufacturing tolerances (EU Legislation allows 5% tolerance). Payload figures do not allow for the weight of the driver, any passengers, or Ireland/UK Specification (10kg) and should be deducted from all figures. Also Payload figures do not allow for deletable options which should be deducted as appropriate. Please note that the Premium Pack adds 25kgs with a corresponding decrease in payload. Gross plated weights (including axle weights) quoted on the vehicle plate are to Ireland/UK plated weight specification and must never be exceeded. * = BiTurbo models add 9kg to the vehicle weight with a corresponding reduction in payload. The weight of any fitted conversion body will have to be deducted from these figures to establish actual payload and is subject to correct weight distribution. Variations from the recommended dimensions or weights may affect the vehicle s overall centre of gravity and stability. From 29 April 2013 conversion of N1 vehicles was affected by changes to type approval for further information refer to the VCA website (N2 vehicles were affected from 29 October 2014). FUEL ECONOMY AND EMISSIONS CHASSIS CAB Fuel economy litres/100km # CO 2 Urban driving Extra urban driving Combined figure emissions (g/km) # L2/L3 FWD CDTi (110PS) CDTi (130PS) CDTi BiTurbo (145PS) S/S L2/L3 RWD CDTi BiTurbo (130PS) CDTi BiTurbo (145PS) S/S L2/L3/L4 RWD HD 3500 HD 2.3CDTi BiTurbo (130PS) HD 2.3CDTi BiTurbo (145PS) S/S #Fuel consumption information is official government environmental data, tested in accordance with the relevant EU directive. Official EU-regulated test data is provided for comparison purposes and actual performance will depend on driving style, road conditions and other non-technical factors. S/S = Start/Stop.

19 MOVANO CHASSIS CREW CAB L2 FWD L2 RWD L3 RWD 2272 (89.4) 2295 (90.3) 2285 (90.0) New Movano Crew Cab L3 H1 FWD 5643 (222.2) 1119 (44.1) 5643 (222.2) New 1119 Movano Crew Cab L4 H1 RWD DRW (44.1) 6293 (247.8) 1119 (44.1) L3 FWD L3 RWD HD L4 RWD HD 2070 (81.5) exc. door mirrors 2470 (97.2) inc. door mirrors 2263 (89.1) 2301 (90.6) 2286 (90.0) 6293 (247.8) 1119 (44.1) 6193 (243.8) 1669 (65.7) 6843 (269.4) 1669 (65.7) Dimensions mm (inches). Maximum heights shown (unladen). WEIGHTS KG CHASSIS CREW CAB GVW L2 L3 L FWD* Kerbweight n/a Payload n/a 3500 RWD Kerbweight n/a Payload n/a 3500 RWD HD Kerbweight n/a Payload n/a RWD HD Kerbweight n/a Payload n/a Note: Kerbweights are minimum vehicle kerbweight according to European Type Approval and include all fluids, tools and a 90% fuel load. They will vary according to the vehicle specification (including options and accessories) with a corresponding variation in payload. Kerbweights are also subject to manufacturing tolerances (EU Legislation allows 5% tolerance). Payload figures do not allow for the weight of the driver, any passengers, or Ireland/UK Specification (10kg) and should be deducted from all figures. Also Payload figures do not allow for deletable options which should be deducted as appropriate. Please note that the Premium Pack adds 25kgs with a corresponding decrease in payload. Gross plated weights (including axle weights) quoted on the vehicle plate are to Ireland/UK plated weight specification and must never be exceeded. * = BiTurbo models add 9kg to the vehicle weight with a corresponding reduction in payload. n/a = Not applicable. The weight of any fitted conversion body will have to be deducted from these figures to establish actual payload and is subject to correct weight distribution. Variations from the recommended dimensions or weights may affect the vehicle s overall centre of gravity and stability. From 29 April 2013 conversion of N1 vehicles was affected by changes to type approval for further information refer to the VCA website (N2 vehicles were affected from 29 October 2014). FUEL ECONOMY AND EMISSIONS CHASSIS CREW CAB Fuel economy litres/100km # CO 2 Urban driving Extra urban driving Combined figure emissions (g/km) # L2/L3 FWD 2.3CDTi (130PS) CDTi BiTurbo (145PS) S/S L2/L3 RWD 2.3CDTi BiTurbo (130PS) CDTi BiTurbo (145PS) S/S L3/L4 RWD HD 2.3CDTi BiTurbo (130PS) CDTi BiTurbo (145PS) S/S #Fuel consumption information is official government environmental data, tested in accordance with the relevant EU directive. Official EU-regulated test data is provided for comparison purposes and actual performance will depend on driving style, road conditions and other non-technical factors. S/S = Start/Stop. Specification 19

20 MOVANO PLATFORM CAB L2 H1 FWD L2 H2 FWD 2270 (89.4) 2463 (97.0) New Movano Platform Cab L3 H (217.7) 1006 (39.6) 5530 (217.7) 1006 (39.6) L3 H1 FWD L3 H2 FWD 2070 (81.5) exc. door mirrors 2470 (97.2) inc. door mirrors 2264 (89.1) 2457 (96.7) 6180 (243.3) 1006 (39.6) 6180 (243.3) 1006 (39.6) Dimensions mm (inches). Maximum heights shown (unladen). WEIGHTS KG PLATFORM CAB GVW L2 H1 L2 H2 L3 H1 L3 H FWD* Kerbweight Payload Note: Kerbweights are minimum vehicle kerbweight according to European Type Approval and include all fluids, tools and a 90% fuel load. They will vary according to the vehicle specification (including options and accessories) with a corresponding variation in payload. Kerbweights are also subject to manufacturing tolerances (EU Legislation allows 5% tolerance). Payload figures do not allow for the weight of the driver, any passengers, or Ireland/UK Specification (10kg) and should be deducted from all figures. Also Payload figures do not allow for deletable options which should be deducted as appropriate. Please note that the Premium Pack adds 25kgs with a corresponding decrease in payload. Gross plated weights (including axle weights) quoted on the vehicle plate are to Ireland/UK plated weight specification and must never be exceeded. * = BiTurbo models add 9kg to the vehicle weight with a corresponding reduction in payload. The weight of any fitted conversion body will have to be deducted from these figures to establish actual payload and is subject to correct weight distribution. Variations from the recommended dimensions or weights may affect the vehicle s overall centre of gravity and stability. From 29 April 2013 conversion of N1 vehicles was affected by changes to type approval for further information refer to the VCA website (N2 vehicles were affected from 29 October 2014). FUEL ECONOMY AND EMISSIONS PLATFORM CAB Fuel economy litres/100km # CO 2 Urban driving Extra urban driving Combined figure emissions (g/km) # L2 H1/L3 H1/L2 H2/L3 H2 FWD CDTi (110PS) CDTi (130PS) CDTi BiTurbo (145PS) S/S #Fuel consumption information is official government environmental data, tested in accordance with the relevant EU directive. Official EU-regulated test data is provided for comparison purposes and actual performance will depend on driving style, road conditions and other non-technical factors. S/S = Start/Stop. 20 Specification

21 ENGINES / TECHNICAL DATA 2.3CDTi (110PS) BlueInjection with or without Start/Stop 2.3CDTi (130PS) BlueInjection 2.3CDTi BiTurbo (130PS) BlueInjection Capacity 2298cc 2298cc 2298cc Maximum power 110PS 3500rpm 130PS 3500rpm 130PS 3500rpm Maximum torque 290Nm ( rpm 320Nm ( rpm 330Nm ( rpm Configuration Fuel/induction system 4 cylinders, 4 valves per cylinder, double overhead camshafts Fixed geometry turbocharger and intercooler. Common rail fuel injection Twin variable geometry turbochargers and intercoolers. Common rail fuel injection Emission compliance Euro 6 Euro VI Service interval 2.3CDTi BiTurbo (145PS) BlueInjection with Start/Stop 40,000km or two years (whichever occurs sooner) 2.3CDTi BiTurbo (163PS) BlueInjection with Start/Stop 2.3CDTi BiTurbo (170PS) BlueInjection with Start/Stop Capacity 2298cc 2298cc 2298cc Maximum power 145PS 3500rpm 163PS 3500rpm 170PS 3500rpm Maximum torque 360Nm ( rpm 360Nm ( rpm 380Nm ( rpm Configuration Fuel/induction system 4 cylinders, 4 valves per cylinder, double overhead camshafts Twin variable geometry turbochargers and intercoolers. Common rail fuel injection Emission compliance Euro 6 (FWD) / Euro VI (RWD) Euro VI Euro 6 Service interval 40,000km (32,000km on Minibus models) or two years (whichever occurs sooner) Vehicles with BlueInjection technology will need regular AdBlue top-ups also between servicing requirements. An indicator integrated into the on-board computer will warn you when you need to top up. More information under In accordance with regulations R (EC) No. 715/2007 and R (EC) No. 692/2008 (in the versions respectively applicable). Transmissions Six-speed manual gearbox: FWD models: Transverse engine/gearbox L1/L2/L3 models RWD / RWD HD models: Longitudinal engine/gearbox L2/L3/L4 models Electrical 95Ah maintenance-free battery 185A alternator Body Six years body panel anti-perforation warranty Galvanised body panels Anti stone-chip mastic coating on sills Flush-fitted windscreen and rear door glass (when specified) Detachable front towing eye Rear towing eye Brakes Front ventilated disc brakes: FWD / RWD / RWD HD 302mm x 28mm Rear disc brakes: FWD / RWD 305mm x 12mm RWD HD 305mm x 18mm Fuel tank capacity 80 litres (17.6 gallons) 105 litres (23.1 gallons) optional Steering Electrically assisted power steering Power-assisted rack and pinion system Turns lock-to-lock: 3.7 Turning circles: Kerb-to-kerb Wall-to-wall FWD / RWD L2 13.6m (44.6ft.) 14.1m (46.2ft.) FWD L3 15.7m (51.5ft.) 16.2m (53.1ft.) RWD / RWD HD L3 13.6m (44.6ft.) 14.1m (46.2ft.) L4 15.7m (51.5ft.) 16.2m (53.1ft.) Suspension Front suspension: MacPherson type Independent double wishbones Coil springs Telescopic dampers Rear suspension: Tubular axle Telescopic dampers Variable rate leaf springs FWD models: Single leaf springs Single rear wheels RWD models: Double leaf springs Single rear wheels RWD HD models: Triple leaf springs Twin rear wheels Specification 21

22 MOVANO TIPPER L2 FWD L2 RWD HD L3 RWD HD Load length 3205 (126.2) Load length 3205 (126.2) Load length 3105 (122.2) 2370 (93.3) 1090 (42.9) 2400 (94.5) 1090 (42.9) 2400 (94.5) 1090 (42.9) 2100 (82.7) exc. door mirrors 2470 (97.2) inc. door mirrors 5819 (229.1) 1295 (51.0) 5819 (229.1) 1295 (51.0) 6389 (251.5) 1865 (73.4) Dimensions mm (inches). Maximum heights shown (unladen). WEIGHTS KG TIPPER GVW L2 L FWD* Kerbweight 2306 n/a Payload 1194 n/a 3500 RWD HD Kerbweight Payload RWD HD Kerbweight Payload Note: Kerbweights are minimum vehicle kerbweight according to European Type Approval and include all fluids, tools and a 90% fuel load. They will vary according to the vehicle specification (including options and accessories) with a corresponding variation in payload. Kerbweights are also subject to manufacturing tolerances (EU Legislation allows 5% tolerance). Payload figures do not allow for the weight of the driver, any passengers, or Ireland/UK Specification (10kg) and should be deducted from all figures. Also Payload figures do not allow for deletable options which should be deducted as appropriate. Please note that the Premium Pack adds 25kgs with a corresponding decrease in payload. Gross plated weights (including axle weights) quoted on the vehicle plate are to Ireland/UK plated weight specification and must never be exceeded. * = BiTurbo models add 9-10kg to the vehicle weight with a corresponding reduction in payload. n/a = Not applicable. The weight of any fitted conversion body will have to be deducted from these figures to establish actual payload and is subject to correct weight distribution. Variations from the recommended dimensions or weights may affect the vehicle s overall centre of gravity and stability. From 29 April 2013 conversion of N1 vehicles was affected by changes to type approval for further information refer to the VCA website (N2 vehicles were affected from 29 October 2014). FUEL ECONOMY AND EMISSIONS TIPPER Fuel economy litres/100km # CO 2 Urban driving Extra urban driving Combined figure emissions (g/km) # L2 FWD CDTi (130PS) CDTi BiTurbo (145PS) S/S CDTi BiTurbo (170PS) S/S L2 RWD HD 3500 HD 2.3CDTi BiTurbo (130PS) HD 2.3CDTi BiTurbo (145/163PS) S/S L3 RWD HD 3500 HD 2.3CDTi BiTurbo (130PS) HD 2.3CDTi BiTurbo (145PS) S/S #Fuel consumption information is official government environmental data, tested in accordance with the relevant EU directive. Official EU-regulated test data is provided for comparison purposes and actual performance will depend on driving style, road conditions and other non-technical factors. S/S = Start/Stop. 22 Specification

23 MOVANO TIPPER CREW CAB L3 FWD L3 RWD HD Load length 3205 (126.2) Load length 3105 (122.2) 2370 (93.3) 1090 (42.9) 2400 (94.5) 1090 (42.9) 2100 (82.7) exc. door mirrors 2470 (97.2) inc. door mirrors 6539 (257.4) 1365 (53.7) 6438 (253.4) 1914 (75.3) Dimensions mm (inches). Maximum heights shown (unladen). WEIGHTS KG TIPPER CREW CAB GVW L FWD Kerbweight 2455 Payload HD RWD Kerbweight 2755 Payload 1595 Note: Kerbweights are minimum vehicle kerbweight according to European Type Approval and include all fluids, tools and a 90% fuel load. They will vary according to the vehicle specification (including options and accessories) with a corresponding variation in payload. Kerbweights are also subject to manufacturing tolerances (EU Legislation allows 5% tolerance). Payload figures do not allow for the weight of the driver, any passengers, or Ireland/UK Specification (10kg) and should be deducted from all figures. Also Payload figures do not allow for deletable options which should be deducted as appropriate. Please note that the Premium Pack adds 25kgs with a corresponding decrease in payload. Gross plated weights (including axle weights) quoted on the vehicle plate are to Ireland/UK plated weight specification and must never be exceeded. FUEL ECONOMY AND EMISSIONS TIPPER CREW CAB Fuel economy litres/100km # CO 2 Urban driving Extra urban driving Combined figure emissions (g/km) # L3 FWD CDTi (130PS) CDTi BiTurbo (145PS) S/S #Fuel consumption information is official government environmental data, tested in accordance with the relevant EU directive. Official EU-regulated test data is provided for comparison purposes and actual performance will depend on driving style, road conditions and other non-technical factors. S/S = Start/Stop. The weight of any fitted conversion body will have to be deducted from these figures to establish actual payload and is subject to correct weight distribution. Variations from the recommended dimensions or weights may affect the vehicle s overall centre of gravity and stability. From 29 April 2013 conversion of N1 vehicles was affected by changes to type approval for further information refer to the VCA website (N2 vehicles were affected from 29 October 2014). Specification 23

24 MOVANO DROPSIDE L2 FWD L2 RWD L2 RWD HD Load length 3170 (124.8) Load length 3170 (124.8) Load length 3170 (124.8) 2350 (92.5) 1026 (40.4) 2350 (92.5) 1026 (40.4) 2375 (93.5) 1026 (40.4) 5749 (226.3) 1225 (48.2) 5749 (226.3) 1225 (48.2) 5749 (226.3) 1225 (48.2) L3 FWD L3 RWD HD L4 RWD HD 2100 (82.7) exc. door mirrors 2470 (97.2) inc. door mirrors Load length 3900 (153.5) Load length 3700 (145.7) Load length 4470 (176.0) 2350 (92.5) 1026 (40.4) 2375 (93.5) 1026 (40.4) 2375 (93.5) 1026 (40.4) 6418 (252.7) 1244 (49.0) 6299 (248.0) 1775 (69.9) 6949 (273.6) 1775 (69.9) Dimensions mm (inches). Maximum heights shown (unladen). WEIGHTS KG DROPSIDE GVW L2 L3 L FWD* Kerbweight n/a Payload n/a 3500 RWD Kerbweight n/a n/a Payload n/a n/a 3500 RWD HD Kerbweight Payload RWD HD Kerbweight Payload Note: Kerbweights are minimum vehicle kerbweight according to European Type Approval and include all fluids, tools and a 90% fuel load. They will vary according to the vehicle specification (including options and accessories) with a corresponding variation in payload. Kerbweights are also subject to manufacturing tolerances (EU Legislation allows 5% tolerance). Payload figures do not allow for the weight of the driver, any passengers, or Ireland/UK Specification (10kg) and should be deducted from all figures. Also Payload figures do not allow for deletable options which should be deducted as appropriate. Please note that the Premium Pack adds 25kgs with a corresponding decrease in payload. Gross plated weights (including axle weights) quoted on the vehicle plate are to Ireland/UK plated weight specification and must never be exceeded. * = BiTurbo models add 9-10kg to the vehicle weight with a corresponding reduction in payload. n/a = Not applicable. The weight of any fitted conversion body will have to be deducted from these figures to establish actual payload and is subject to correct weight distribution. Variations from the recommended dimensions or weights may affect the vehicle s overall centre of gravity and stability. From 29 April 2013 conversion of N1 vehicles was affected by changes to type approval for further information refer to the VCA website (N2 vehicles were affected from 29 October 2014). FUEL ECONOMY AND EMISSIONS DROPSIDE Fuel economy litres/100km # CO 2 Urban driving Extra urban driving Combined figure emissions (g/km) # L2 FWD CDTi (130PS) CDTi BiTurbo (145PS) S/S L3 FWD CDTi (130PS) CDTi BiTurbo (145PS) S/S L2 RWD CDTi (130PS) CDTi BiTurbo (145PS) S/S L2/L3/L4 RWD HD 3500 HD 2.3CDTi BiTurbo (130PS) HD 2.3CDTi BiTurbo (145PS) S/S #Fuel consumption information is official government environmental data, tested in accordance with the relevant EU directive. Official EU-regulated test data is provided for comparison purposes and actual performance will depend on driving style, road conditions and other non-technical factors. S/S = Start/Stop.

25 MOVANO DROPSIDE CREW CAB L2 FWD L3 FWD Load length 2501 (98.5) Load length 3170 (124.8) 2350 (92.5) 1026 (40.4) 2350 (92.5) 1026 (40.4) 5749 (226.3) 1225 (48.2) 6499 (255.9) 1325 (52.2) L2 RWD L3 RWD HD L4 RWD HD 2100 (82.7) exc. door mirrors 2470 (97.2) inc. door mirrors Load length 2501 (98.5) Load length 3070 (120.9) Load length 3702 (145.7) 2350 (92.5) 1026 (40.4) 2375 (93.5) 1026 (40.4) 2375 (93.5) 1026 (40.4) 5749 (226.3) 1225 (48.2) 6398 (251.9) 1874 (73.8) 7048 (277.5) 1874 (73.8) Dimensions mm (inches). Maximum heights shown (unladen). WEIGHTS KG DROPSIDE CREW CAB GVW L2 L3 L FWD* Kerbweight n/a Payload n/a 3500 RWD Kerbweight 2396 n/a n/a Payload 1104 n/a n/a 4350 RWD HD Kerbweight n/a Payload n/a Note: Kerbweights are minimum vehicle kerbweight according to European Type Approval and include all fluids, tools and a 90% fuel load. They will vary according to the vehicle specification (including options and accessories) with a corresponding variation in payload. Kerbweights are also subject to manufacturing tolerances (EU Legislation allows 5% tolerance). Payload figures do not allow for the weight of the driver, any passengers, or Ireland/UK Specification (10kg) and should be deducted from all figures. Also Payload figures do not allow for deletable options which should be deducted as appropriate. Please note that the Premium Pack adds 25kgs with a corresponding decrease in payload. Gross plated weights (including axle weights) quoted on the vehicle plate are to Ireland/UK plated weight specification and must never be exceeded. * = BiTurbo models add 9kg to the vehicle weight with a corresponding reduction in payload. n/a = Not applicable. The weight of any fitted conversion body will have to be deducted from these figures to establish actual payload and is subject to correct weight distribution. Variations from the recommended dimensions or weights may affect the vehicle s overall centre of gravity and stability. From 29 April 2013 conversion of N1 vehicles was affected by changes to type approval for further information refer to the VCA website (N2 vehicles were affected from 29 October 2014). FUEL ECONOMY AND EMISSIONS DROPSIDE CREW CAB Fuel economy litres/100km # CO 2 Urban driving Extra urban driving Combined figure emissions (g/km) # L2/L3 FWD CDTi (130PS) CDTi BiTurbo (145PS) S/S CDTi BiTurbo (170PS) S/S L2 RWD CDTi (130PS) CDTi BiTurbo (145PS) S/S #Fuel consumption information is official government environmental data, tested in accordance with the relevant EU directive. Official EU-regulated test data is provided for comparison purposes and actual performance will depend on driving style, road conditions and other non-technical factors. S/S = Start/Stop. Specification 25

26 MOVANO BOX VAN L3 FWD/RWD (20cu.m) L4 RWD HD (20cu.m) L4 RWD HD (22cu.m) 3250 (127.9) 3250 (127.9) 3250 (127.9) 1050 (41.3) 1050 (41.3) 1050 (41.3) 2210 (87.0) exc. door mirrors 2654 (104.5) inc. door mirrors 6662 (262.3) (87.0) exc. door (58.6) mirrors 2470 (97.2) inc. door mirrors 6862 (270.1) (87.0) exc. door (66.4) mirrors 2470 (97.2) including door mirrors 7142 (281.2) 1968 (77.5) Dimensions mm (inches). Heights shown unladen. WEIGHTS KG BOX VAN GVW L3 L4 (20cu.m) L4 (22cu.m) 3500 FWD Kerbweight 2325 n/a n/a Payload 1175 n/a n/a 3500 RWD Kerbweight 2485 n/a n/a Payload 1015 n/a n/a 3500 RWD HD Kerbweight n/a Payload n/a RWD HD Kerbweight n/a 2660 n/a Payload n/a 1840 n/a Note: Kerbweights are minimum vehicle kerbweight according to European Type Approval and include all fluids, tools and a 90% fuel load. They will vary according to the vehicle specification (including options and accessories) with a corresponding variation in payload. Kerbweights are also subject to manufacturing tolerances (EU Legislation allows 5% tolerance). Payload figures do not allow for the weight of the driver, any passengers, or Ireland/UK Specification (10kg) and should be deducted from all figures. Also Payload figures do not allow for deletable options which should be deducted as appropriate. Please note that the Premium Pack adds 25kgs with a corresponding decrease in payload. Gross plated weights (including axle weights) quoted on the vehicle plate are to Ireland/UK plated weight specification and must never be exceeded. LOADSPACE DIMENSIONS MM (INCHES) BOX VAN L3 20cu.m FWD/RWD L4 20cu.m RWD L4 22cu.m RWD Maximum internal length 4100 (161.4) 4300 (169.3) 4580 (180.3) Maximum internal width 2150 (84.6) 2150 (84.6) 2150 (84.6) Maximum internal height 2200 (86.6) 2200 (86.6) 2200 (86.6) LOADSPACE VOLUME CU.M (CU.FT.) BOX VAN VDA method 19.4 (685.1) 20.3 (716.9) 21.7 (766.3) FUEL ECONOMY AND EMISSIONS BOX VAN Fuel economy litres/100km # CO 2 Urban driving Extra urban driving Combined figure emissions (g/km # L3 FWD 20cu.m CDTi (130PS) CDTi BiTurbo (145PS) S/S CDTi BiTurbo (170PS) S/S L3 RWD 20cu.m CDTi BiTurbo (130PS) CDTi BiTurbo (145PS) S/S CDTi BiTurbo (163PS) S/S L4 RWD HD 20cu.m / 22cu.m 3500 HD 2.3CDTi BiTurbo (130PS) HD 2.3CDTi BiTurbo (145PS) S/S #Fuel consumption information is official government environmental data, tested in accordance with the relevant EU directive. Official EU-regulated test data is provided for comparison purposes and actual performance will depend on driving style, road conditions and other non-technical factors. S/S = Start/Stop. The weight of any fitted conversion body will have to be deducted from these figures to establish actual payload and is subject to correct weight distribution. Variations from the recommended dimensions or weights may affect the vehicle s overall centre of gravity and stability. From 29 April 2013 conversion of N1 vehicles was affected by changes to type approval for further information refer to the VCA website (N2 vehicles were affected from 29 October Specification

27 GLOSSARY OF TERMS Plated weight The maximum weight to which a vehicle or an axle may be loaded, determined either by the design of the components or by legislation. All commercial vehicles must carry a manufacturer s plate showing the vehicle and axle gross plated weights. It is an offence to drive a vehicle in a condition where any of these weights are exceeded. Kerbweight The weight of the complete vehicle in standard form, excluding payload and driver but including coolant, oil, 90% full fuel tank and spare wheel where appropriate. Kerbweights quoted in Opel brochures are subject to manufacturing tolerances and to the fitment of optional equipment and accessories. Where load capacity is critical the actual kerbweight should be obtained by weighing the vehicle on a calibrated public weighbridge. Gross Vehicle Weight (GVW) The total permissible weight of a vehicle including payload and passengers, as shown on the manufacturer s plate. Gross Combination Weight (GCW) The maximum permissible weight of a vehicle, including payload and passengers, combined with the total weight of any trailer it is towing. The maximum GCW weight limit is quoted on the vehicle plate and must not be exceeded. Payload The total permissible weight that can be carried without exceeding the vehicle s plated weight. This can be obtained by deducting the kerbweight from the plated Gross Vehicle Weight (GVW). Please note: the payload figure does not allow for the weight of the driver or any passengers. Maximum towing weight The maximum weight of any trailer and its load which may be towed within the limit of the vehicle s plated Gross Combination Weight (GCW). It is based on the ability of the vehicle at full GCW to restart on a 12% gradient, which is approximately 1 in 8.3, at sea level. At altitudes above 1500 metres, the engine output may drop with a corresponding reduction in towing capability. It is the operator s responsibility to ensure that the trailer noseweight does not cause the rear axle plated weight of the towing vehicle to be exceeded. Always fit Opel towing attachments and accessories available from your Opel Commercial Vehicle retailer. They are designed specifically for Opel models and carry a 12 month warranty. OPEL ASSISTANCE AND WARRANTIES* Every Movano base vehicle comes with: A three-year vehicle warranty consisting of a one-year/unlimited mileage manufacturer s warranty and a second and third year manufacturer s warranty with a 150,000km limitation Opel Assistance for 12 months from first registration Six-year body panel anti-perforation warranty * = Warranty is only available on vehicles sourced from Opel Motors Ltd. Terms and conditions apply please see your Opel Commercial Vehicle Dealer for details. Specification 27

28 Opel Service. Commercial vehicle dealer network. A network of nationwide Opel Ireland commercial vehicle dealers, including dedicated heavy van specialists responsible for Vivaro and Movano, offer sales support and the expert service and maintenance know how to keep your business moving. Europe-wide Customer Service. Throughout Europe, more than 6,000 Opel repair workshops are ready to provide professional and punctual service. As you d expect, they ll repair your vehicle to the highest standards. More unusually, perhaps, they ll tell you exactly what s been done and why, and they will show any costs involved clearly and concisely. New Vehicle Warranty. 3-year/150,000km. This warranty applies to any new Opel commercial vehicle for a period of 3 years or 150,000km (whichever occurs sooner) from the day on which it was either registered for the first time or delivered to the customer by the dealer, depending on which date comes first. Opel Roadside Assistance. This free-of-charge mobility service is valid for all new Opel vehicles during the first year after the date on which they were first registered or delivered to the customer by the dealer, depending on which date comes first. No matter where you are, the Opel Assistance is there to help. In more than 40 European countries round the clock. Offering services such as breakdown assistance, towing services, rental car, hotel accommodation or the organisation of onward transportation, e.g. via rail or air (please see programme conditions). 12-year Anti-Perforation Warranty. Opel provides you with a reliable long-term warranty against perforation, provided you have your vehicle serviced and all necessary inspections performed according to the service booklet. 2-year Warranty for Opel Batteries. With a 2-year warranty for service-installed Opel original batteries your starting problems are over even in the coldest winter. Parts and Accessories Service. Opel parts and accessories are available at your local Opel Shop, where you ll find everything to make your vehicle more comfortable or to meet your individual needs, as well as expert advice. Opel on the Internet. Need instant information? At you can access a wealth of information on all Opel cars, services, and accessories. Get online for Opel news and product updates. Recycling. Information about Design for Recycling, Take- Back points for End of Life Vehicles (ELVs) and the recycling of ELVs can be found on the Opel website In case of any questions, please ask your Opel dealer. More information can be found at Every effort has been made to ensure that the contents of this publication were accurate and up-to-date at the time of publication (January 2017). Opel vehicles are equipped with components manufactured by various General Motors operating units and outside suppliers. The Company reserves the right to change specifications and withdraw products from sale without notice. Any such alterations will be notified to Opel dealers at the earliest opportunity; please consult your local dealer for the latest information. The specifications detailed within this brochure are not necessarily applicable to alternative models such as Special Editions. Details of any such models will be contained in specific literature or found on the Opel website. The colours reproduced in this brochure may vary slightly from the actual paint colour or trim material due to the limitations of the printing process. Please note that Opel dealers are not the agents of General Motors Ireland Limited and are not authorised to bind the Company by any specific or implied undertaking or representation. It is advisable to ensure that your motor insurance policy provides adequate cover for additional fitted options and accessories. As part of Opel s policy of environmental care, this brochure is printed on paper manufactured using Elemental Chlorine Free pulps from specially farmed, sustainable timber resources. All rights reserved. No part of this publication may be reproduced in any form or by any means, without the prior written permission of General Motors Ireland Limited. Published January 2017 General Motors Ireland Limited, Fern Road, Sandyford Business Estate, Dublin V1