Hyundai New Backhoe Loader

Transcription

1 Hyundai New Backhoe Loader We Build a Better Future Marketing & Planning Department

2 Hyundai suggests new standards of Backhoe loaders Superior performance, advanced fuel efficiency, and easy maintenance give HYUNDAI backhoe loaders a competitive edge over its existing competitors Hyundai New Backhoe Loader 1

3 Design Objectives Ⅰ. Premium Performance Ⅱ. Operator Comfort Ⅲ. Total Versatility Ⅳ. Serviceability Ⅴ. Remarks 2

4 Ⅰ. Premium Performance 1. Powerful and Reliable Engine - High Efficiency Fuel System Fuel Injection Pump : Bosch(IVECO), Delphi(PERKINS) - Cold Start System Air Grid Heater (IVECO), Glow Plug (Perkins) - Emission Regulation TIER3 & EU STAGE III-A (IVECO), TIER2 & EU STAGE II (Perkins) Specification Description Unit H930C/H940C (Center Pivot) H930S/H940S (Side Shift) Maker / Model - FPT(IVECO) / N45MNT(S) Perkins / 1104C-44T Emission Regulation - Tier 3 / STAGE Ⅲ-A Tier 2 / STAGE II Displacement cc 4,500 4,400 Power (Gross) HP/rpm 89/ / / /2200 Max. Torque kgf m/rp m 41/ / / /1350 3

5 Ⅰ. Premium Performance 2. Convenient & Efficient Power Shift Transmission - Full Power shift transmission as standard specification (Fast and easy, efficient operation) - Smooth & fast directional speed shifts with hydraulic control valves - Forward & reverse, up & down shifts operation by one twist grip lever Easy and convenient More space in cabin (free of mechanical shift lever) Specification Description Standard Option Maker/Model ZF/4WG94-2WD ZF/4WG94-4WD Shift Type Power Shift Drive Type 2 Wheel 4 Wheel Speed F4/R2 F4/R3 4

6 Ⅰ. Premium Performance 3. Durable Axle & Drive System 1) Axles - Special design for demanding backhoe loader applications - Outboard planetary gear sets for easy service ability - Brake designed for longer service life 2) 4 Wheel Drive (Opt) - Improved mobility and loader performance in poor terrain condition (can be activated on-the-go) Specification Description Standard Front Axle Option Rear Axle Maker/Model CARRARO/26.00 ZF/MS-B3025 ZF/MT-B3070 Drive Type 2 Wheel 4 Wheel 2 & 4 Wheel Front Axle (2WD) Front Axle (4WD) Rear Axle 5

7 Ⅰ. Premium Performance 3) Differential Lock System - Installed 100% lockable differential to the real axle for more traction on the tough terrain 4) Service Brakes - Oil immersed disk brake - Actuated by individual braking on each rear wheel with 2 separate pedals - Self-Adjustable Service Brake 5) Electrically Operated Parking Brake - Operated by the electric switch on the panel Easy and convenient More space in cabin (free of mechanical lever) - Multi wet (oil immersed) type brake Improves durability Free from external contamination Parking Brake 6

8 Ⅰ. Premium Performance 4. Tandem Gear Pump for high Pressure - Compact Design With Priority Valve - Unused Pump Cut-off System : Lower Fuel Consumption ( Converts the unused hydraulic fluid of the second pump to the hydraulic tank) Light Load Operating and Highway Driving Specification Description Unit H930C/S H940C/S Displacement cc/rev cc/rev cc/rev Working Pressure kg/ cm2 250 bar 250 bar 7

9 Ⅰ. Premium Performance 5. Excellent Cooler Performance - Optimal Air Flow by Optima Layout Sufficient Cooling Capacity in Hot Weather - Test Heat Balance Test Condition : Ambient Temp. 45, V-Load for 1hrs Temp Spec : Coolant ( 106 ), T/M Oil ( 105 ), Hyd. Oil ( 100 ) 8

10 Ⅰ. Premium Performance 6. Boom Floating - Lowering the boom by its own weight through the connection of raise and lower circuits to the tank circuit 7. Cushioned Cylinders - Protects cylinders and backhoe structural elements Boom Raise Dipper In 9

11 Ⅱ. Operator Comfort 1. CAB Appearance & Visibility 1) CAB Appearance - Certified by ROPS/FOPS - Full safety cage with 360-degree panoramic visibility - Large internal volume and wide round glass surface for the comfortable use of the operator 10

12 Ⅱ. Operator Comfort 2) Visibility of the Outrigger Foot - Corner of rear window gives good visibility to foot of outrigger 11

13 Ⅱ. Operator Comfort 3) Full visibility of the Loader bucket - Wide upper front window - good visibility to cutting edge of bucket for loader - Sloped and narrow bonnet - easy and safe to work with the front loader 12

14 Ⅱ. Operator Comfort 3) Side door & Sliding window Open - Easy to lead both front and side - Flat, tinted and tempered side rear windows (opens completely) - Excellent cab ventilation - Toughened glass (if broken, fractures into small fragments reduce the likelihood of injury) 13

15 Ⅱ. Operator Comfort 4) Glass Wiper(For Cabin) - Toughened glass (if broken, fractures into small fragments reduce the likelihood of injury) Front 2speed with washer and intermittent Rear 1 speed with washer 14

16 Ⅱ. Operator Comfort 2. Ergonomics Interior Design - Offers the best ergonomics, low noise, and comfort - Includes tilt steering column, and washable padded rubber floor mat - All gages, switches, and levers are located for easy and comfortable use - Provides fully adjustable seat and fresh filtered air intake ventilation 15

17 Ⅱ. Operator Comfort 1) Side Console with Full Instrumentation - All function controls within close reach of operator s right hand while in loader position and left hand when in backhoe position 16

18 Ⅱ. Operator Comfort 2) CLUSTER - Water-proof - Indication Lamps interfaced with LED - 3 gauge, 8 indication & warning lamp Speed gauge 5 Engine Oil Pressure 9 Fuel Level Coolant Temperature gauge 6 Coolant Temperature 10 Air Cleaner Fuel Gauge 7 Battery Charge 11 Warning 4 Engine Pre Heater 8 Transmission Oil Temperature 17

19 Ⅱ. Operator Comfort 3) Radio with MP3 (For Cabin) Using the USB port, the music in external audio device or USB memory can be played. 4) Various Storage in CAB 18

20 Ⅱ. Operator Comfort 5) Suspension Seat - Adjustable seat for a wider operating range and more comfortable ride - Provides back and lumbar supports - Equipped with seat cushion extension, seat cushion tilt, and vertical angle adjusting armrests 19

21 Ⅱ. Operator Comfort 3. Adjustable Convenient Device - Tilting Steering Column - LH/RH Door Upper window - Full open - Slightly open - Tilt Backhoe control tower (back & forth) - Adjustable Roll Screen (Up & Down)

22 Ⅱ. Operator Comfort 4. Air-con Condenser / Compressor Durability - Air-con Condenser - Non Louvered Type - Air-con Compressor - Variable Displacement Compressor Performance - Air-con Condenser on the front of RAD. : Maximize Efficiency & Easy Clean Condenser 21

23 Ⅱ. Operator Comfort 5. Climate Control System (Opt.) - Air Conditioning - Heating and Defrosting System - Optimal Air Vent - Adjustable 14EA Nozzles - Ergonomic location - Cooling Capacity Increased 5,000 5,200 kcal/hr - Heating Capacity Increased 6,000 7,000 kcal/hr - Air Flow Increased m³/hr - Intuitive Controller 22

24 III. Total Versatility 1. Optimal Parallel Lifting - Excellent parallelism in both lifting and lowering operations 2. Backhoe Boom - Allows good visibility to the trench when the operator digs around buried obstructions such as water mains, sewer pipes, utility lines, etc 2.63m Boom (STD) 2.81m Boom (OPT) 23

25 III. Total Versatility 3. Extended Dipper - Increases digging depth, reach, and ability of working process 2m Mono Dipper(STD) 2~3.2m Extended Dipper (OPT) 4. General Purpose Backhoe Bucket - A complete range of backhoe buckets from 300mm to 910mm (12" to 36 ) 24

26 III. Total Versatility 5. Loader Boom - Welded construction, which equips diameter torque tube, dual lift cylinders and tilt cylinders - Strong and rigid loader frame (creates a greater lifting capacity) - Clear sightlines and excellent visibility 25

27 III. Total Versatility 6. Safety 1) Stabilizer Safety System (STD) - Two stabilizers and two stabilizer safety valves are equipped (each operated by its own control valve and cylinder) - Provides protection in the event of a hose burst in both stabilizers Protects from both raises (while working) and lowers (while traveling) of the stabilizer H930C / H940C H930S / H940S 26

28 III. Total Versatility 2) Clam Safety System (OPT) - Prevents the uncontrolled opening of the clam bucket by its weight of load during in both loading and dozing processes Clam bucket Clam safety valve 27

29 III. Total Versatility 3) Integrated Safety Bar - Integral part of the loader arm and has a locking pin (Guarantees both operator s safety when servicing and no risk of losing the safety strut) 28

30 III. Total Versatility 4) Swing Safety Locking 5) Boom Safety Locking 29

31 III. Total Versatility 5) Safety System (OPT) - Disables the control lever of loader, backhoe (excavator), and stabilizer levers by flipping the safety switch on the rear console (backhoe side) Safety Switch (loader) Safety switch (backhoe) 30

32 III. Total Versatility 7. General Purpose Loader Bucket - General purpose loader bucket with optional teeth or reversible bolt-on cutting edge, rounded inside profile, and level top Description GP Bucket for Blade GP Bucket for Teeth Capacity (m³) Width (mm) Multi Purpose Loader Bucket mm wide, 1,0m³ (92,5" cubic yard) multi purpose loader bucket with optional fork 31

33 IV. Serviceability 1. Full Open Hood - Provides Convenient access to all engine check points - Full open engine hood offers good access to regular service points, all of which can be reached from ground level for safety Engine Oil 2. Ground Level Greasing Points Mission Oil - Maintenance time saving (Accessible from ground level - placed on the left side of the machine) 32

34 IV. Serviceability 3. Hydraulic Pressure Check Points - Coupling-screws for pressure locates at 3 places for easy checks as follows 1 st Pump 2 nd Pump Pilot supply unit 4. Visible Hydraulic Oil Level Gage 33

35 IV. Serviceability 5. Battery Disconnect -Switch located on the lower end front side of the cabin - Safely disconnects all electrical functions for maintenance and anti-vandal Battery Disconnect Switch 34

36 Ⅴ. Remarks 1. Option 1) Return - to- Dig - Automatic return-to-dig function => Reduces loading cycle times 2) Work Lights - Four front-adjustable 55 watt halogen work lights and four rear-adjustable 55 watt halogen work lights as opt. (2 x 2 work lights : STD) Front Rear 35

37 Ⅴ. Remarks 3) Pilot Control - Pilot control type can be operated with comfort seat position - Fully adjustable control columns - Optional M/P Bucket and extendable dipper (use switch) Clam Switch Extendable dipper switch Breaker & horn switch (Loader) (Backhoe) 36

38 Ⅴ. Remarks 4) Pattern Selector (OPT) - Selector switch located in the cabin inside, which allows the operator to select either ISO or SAE control pattern by simply pressing the button (for Backhoe position) - Provides the most efficient method for operators as following feature shows Dipper Out Boom Down Pattern Selector Switch Boom Down Dipper Out Dipper IN Boom UP Boom UP Dipper IN RCV LH (ISO) RCV RH RCV LH (SAE) RCV RH 37

39 Ⅴ. Remarks 5) Ride Control System (OPT) - Smoothes the ride in all conditions, such as loading and carrying, running on a highway, and simply moving around the job site - Equipped Shock absorber/suspension to the lift cylinders to minimize loader arm bouncing when traveling over rough terrain (allows to carry full bucket loads of material with low spillage risk) - Provides higher productivity and greater operator comfort - Switch is located on the side console with two operating modes On and Off Switch OFF Switch ON 38

40 Ⅴ. Remarks 6) Breaker System - Provides one way breaker pipe, control switch, and breaker valve - Activated by pressing the breaker control switch on backhoe lever Breaker Control Switch Breaker Pipe RCV (RH) Backhoe 39

41 Ⅴ. Remarks 2. Remarks 1) O-Ring Face Seal (ORFS) Type Tube Connection - Enhances the machine s reliability and allows faster and easier repairing process - No oil leakage 2) Tool Box (STD) - Integrated in the hyd tank with lockable cover 40

42 Specification Description Unit Side Shift Type Center Pivot Type H930S H940S Remarks H930C H940C Remarks Remarks Operating Weight kg 7750 (7300) 7800 (7350) 4WD+Cab+GP+ Mono Dipper ():Canopy,2WD WD+Canopy GP+Mono Dip per *** Option *** E/G Backhoe Loader T/M Maker - Perkins Perkins IVECO IVECO Power HP/rpm 92/ / / /2200 Max Reach (S/Pivot, Ground Base) mm Loading height Digging Force Dump height Bucket kg Dipper Dump Reach mm Dig Depth Breakout Force kg Speed km/hr Transmission (F/R) - F4 / R2 F4 / R2 (4WD:F4/R3) F4 / R2 F4 / R2 (4WD:F4/R3) Turning Diameter - Tire Outside Transport Length mm 7550 (8350) 7550 (8350) ():4WD 7550 (8350) 7550 (8350) ():4WD * Cabin * 4Wheel Drive * Extended Dipper * L/Boom(2.81m) * Loader Bucket 1.0 m3 GP Bucket 1.0 m3 MP Bucket * Breaker Piping * Ride control * Hydraulic control * Pattern change * Additional CWT 150kg,350kg,550kg * Static Dim. Transport Height mm Transport Width - bucket 2250 (2230) 2250 (2230) ():Rear Tire 2250 (2240) 2250 (2240) ():Rear Tire 41

43 Thank You! We Build a Better Future