LABOR COMMISSIONER'S EXHIBITS

Size: px

Start display at page:

Download "LABOR COMMISSIONER'S EXHIBITS"

Elvin Lynch
5 years ago
Views:

1 BRIAN SANDOVAL Governor TERRY JOHNSON Director MICHAEL TANCHEK Labor Commissioner STATE OF NEVADA REPLY TO: o OFFICE OF THE LABOR COMMISSIONER 555 E. WASHINGTON AVENUE. SUITE 4100 LAS VEGAS. NEVADA PHONE (702) FAX ( Department of Business & Industry OFFICE OF THE LABOR COMMISSIONER Senate Bill 16 LABOR COMMISSIONER'S EXHIBITS

2 PREVAILING WAGE TIME LINE Revise survey forms, instructions, cover letter Post survey forms and instructions on website; issue press release Deadline for submission of surveys Collective bargaining agreements and wage sheets due Union rates established on spreadsheet rates established per county/craft Publish rates on our website, make clerical/technical rates become effective Last day to receive objections corrections E-2

3 INSTRUCTIONS CONSTRUCTION PLEASE READ FOLLOWING: 1. PROJECT CAREFULLY AND ALSO NOTE THE All Survey forms must be received by Thursday July 15,2010 at 5:00PM Survey responses that are late, incomplete, or illegible may be rejected. Use a separate line on the survey fonn for each entry. You may duplicate the fonn as needed or use the online version to fill in the information required. For more information, visit the agency's website at Information that cannot be verified will be rejected. NAME 2. DA TE(S) OF WORK PUBLIC WORKS PROJECTS COUNTY NAME CRAFT CLASSIFICA non 6. NUMBER OF HOURS 5. CODE 7. BASE RATE PER HOUR 8. FRINGES INSTRUCTIONS WAGE SURVEY PER HOUR 9. COLLECTIVE BARGAINING AGREEMENT Enter the name of the project. Provide an exact project name (e.g. Gateway Office Building). Projects should include any commercial, industrial and highway construction project in which you have participated during the survey period. Projects do not have to be prevailing wage projects to be reported. Do not include Federal projects (government buildings, military, Indian or Test Site projects) or residential (multi-family under 5 stories, housing developments or single family) construction. Please indicate the time frame in which the work was performed. The work performed must have occurred between 7/01/09 and 6/ Please list the months and year of work, (e.g. 10/09 to 02/10). Please indicate with a Y (Yes) or N (No) whether the project listed is a Public Works project or not. (Public Work means any project for the new construction, repair, or reconstruction of a project financed in whole or in part from public money.) For additional definitions of a public works project, please see NRS (10). Projects do not have to be public works projects to be reported. Please indicate the county name in which the work was performed. Please use only the craft classification code numbers as provided on the "Craft Classification Sheet." Select the classification that most closely describes the type of work being performed. Please consider only the actual work performed rather than the job title or other affiliations. Please list the total number of hours worked on eligible projects between 7/1/09 and 6/30/10 by craft classification and wage. Report only the base rate of pay, for both regular and overtime hours. Do not report hours worked by apprentices, superintendents or owner/operators. Indicate the hourly base rate paid each classification. Do not give a pay range, nor include fringes or any type of zone pay. Do not include overtime rates. Where applicable, please combine and list the hourly rates for Pension, Health and Welfare, Vacation and Holiday Pay, and the cost of Apprenticeship Training. Do not include employer's portion of payroll taxes, worker compensation insurance, unemployment taxes, or any other taxes or assessments. Do not include any type of zone pay. If the work for a given project was performed while signatory to a collective bargaining agreement, please indicate the union name and local number that performed the work. (e.g. Widgetmakers Local 587). If the work performed was not subject to a collective bargaining agreement, place an X in the NO column. Please feel free to contact our offices at either , or ext. 2650, or via at MAILl@LABORCOMMISSIONER.COM with any questions or for general assistance with completing the wage survey. E-3

4 CRAFT CLASSIFICATIONS CONSTRUCTION WAGE SURVEY CRAFT CLASSIFICA TION CODE 1 AIR BALANCE TECHNICIAN 2 ALARM INSTALLER 3 BOILERMAKER 4 BRICKLAYER 5 CARPENTER 6 CEMENT MASON 7 ELECTRICIAN COMMUNICATION TECHNICIAN 8 ELECTRICIAN LINEMAN/GROUNDMAN/OPERA TOR 9 ELECTRICIAN NEON SIGN 10 ELECTRICIAN WIREMAN 11 ELEV ATOR CONSTRUCTOR 12 FENCE ERECTOR 13 FLOOR COVERER 14 GLAZIER 15 HIGHW AY STRIPER 16 HOD CARRIER BRICK MASON TENDER 17 HOD CARRIER PLASTERER TENDER 18 IRONWORKER 19 LABORER 20 MECHANICAL INSULATOR 21 MILLWRIGHT 22 OPERA TING ENGINEER 23 PAINTER 24 PILEDRIVER (NON-EQUIPMENT) 25 PLASTERER 26 PLUMBER/PIPE FITTER 27 REFRIGERATION MECHANIC 28 ROOFER (DOES NOT INCLUDE SHEET METAL ROOFS) 29 SHEET METAL WORKER 30 SPRINKLER FITTER 31 SURVEY TECHNICIAN 32 TAPER 33 TILE/TERRAZZO WORKER/MARBLE MASON 34 TILE/TERRAZZO WORKER/MARBLE MASON FINISHER 35 TRUCK DRIVER 36 WELL DRILLER 37 EQUIPMENT GREASER 38 SOILS AND MATERIALS TESTER SURVEY FORM ON OPPOSITE PAGE ~ E-4

5 STATE OF NEVADA OFFICE OF THE LABOR COMMISSIONER 555 E. WASHINGTON AVENUE SUITE 4100 LAS VEGAS, NEVADA (702) CONSTRUCTION WAGE SURVEY FOR WORK PERFORMED FROM JULY 1,2009 TO JUNE 30, 2010 SURVEY # FOR OFFICE USE ONLY PLEASE NOTE: Completed surveys must be received by the Labor Commissioner's Office by 5:00 PM, Thursday, July IS, 20 IO. Late, illegible or incomplete forms may be rejected. Please read the instructions before completing survey. Faxed/ ed copies will not be accepted. Please contact our office at (702) for assistance in completing the survey. IiiSurvey does not apply, please circle one and return form: No Employees Retired/Illactive Mgmt. or Supplies On/~ PROJECT NAME DATE(S) OF PWP COUNTY CRAFT #OF BASE FRINGES COLLECTIVE BARGAINING WORK NAME CODE HOURS RATE PER AGREEMENT* PER HOUR (If HOUR applicable) (From/To) YIN rfyes, give Local Name & No. NO Please PRINT information as it appears on Contractor's Business Name: License: I hereby certify the information provided herein is true and accurate to the best of my knowledge. Street/PO Box: Prepared By (Print): PH: ( City, State: Preparer's Signature: TITLE: Zip Code: Contractor's Signature: DATE: Telephone: Address: PLEASE NOTE: PURSUANT TO NAC (3), INFORMATION THAT CANNOT BE VERIFIED WILL BE EXCLUDED. * For each line item. if the work performed was signatory to a Collective Bargaining Agreement, indicate the union name and local number. (e.g. Widgetmakers Local #587) E-5

6 OPERATING ENGINEER SEE GROUP ClASSIFICATIONS Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Group 7 Group 8 Group 9 Group 10 Group 11 Group 12 Group 13 Group 14 Group 15 Group 16 Group 17 Group 18 Group 19 Group 20 Group 21 Group 22 Group 23 Group 24 Group 25 Add $.50 per hour for "Special" Shift Add $1.00 per hour for "Multiple" Shift ADD ZONE RATE E-6

7 OPERATING ENGINEER, includes but is not limited to: Group 1 Bargeman Blade Operator Assistant Brakeman Compressor Operator Ditch Witch, with seat or similar type equipment Elevator Operator - inside Engineer Oiler Forklift Operator (under 5 Tons) Generator Operator Generator, Pump or Compressor Plant Operator Pump Operator Signalman Steam Cleaner/Pressure Washer Switchman Group 2 Asphalt-Rubber Plant Operator (Nurse Tank Operator) Concrete Mixer Operator - Skip type Conveyor Operator Fireman Forklift Operator (over 5 Tons) Hydrostatic Pump Operator Oiler Crusher (Asphalt or Concrete Plant) PJU Side Dump Jack Rotary Drill Helper (Oilfield) Screening and Conveyor Machine Operator (or similar types) Skiploader (wheel type up to 3/4 yd. without attachment) Tar Pot Fireman Temporary Heating Plant Operator Trenching Machine Oiler Group 3 Asphalt-Rubber Blend Operator Bobcat or similar type (Skid Steer) Ford Ferguson (with dragtype attachments) Helicopter Radioman (ground) Stationary Pipe Wrapping and Cleaning Machine Operator Group 4 Asphalt Plant Fireman Backhoe Operator (Mini-Max or similar type) Boring Machine Operator Boring System Electronic Tracking Locator Boxman or Mixerman (Asphalt or Concrete) Chip Spreading Machine Operator Concrete Cleaning Decontamination Machine Operator Concrete Pump Operator (small portable) Drilling Machine Operator, Small Auger Types (Texoma Super Economatic, Hughes 100 or 200, or similar types - drilling depth of 30' maximum) Guard Rail Post Driver Operator Highline Cableway Signalman or similar types- E-7

8 Horizontal Directional Drilling Machine Hydra-Hammer-Aero Stomper Micro Tunneling (above ground tunnel) Power Concrete Curing Machine Operator Power Concrete Saw Operator Power - Driven Jumbo Form Setter Operator Power Sweeper Operator Rock Wheel Saw/Trencher Roller Operator (compacting) Screed Operator (Asphalt or Concrete) Trenching Machine Operator (up to 6 ft.) Vacuum or Muck Truck Group 5 No current classification Group 6 Articulating Material Hauler Asphalt Plant Engineer Batch Plant Operator Bit Sharpener Concrete Joint Machine Operator (canal and similar type) Concrete Planer Operator Dandy Digger Deck Engine Operator Derrickman (Oilfield type) Drilling Machine Operator, Bucket or Auger Types (Calweld 100 Bucket or similar types - Watson 1000 Auger or similar types - Texoma 330, 500 or 600 Auger or similar types - drilling depth of 45' maximum) Drilling Machine Operator (including water wells) Hydrographic Seeder Machine Operator (straw, pulp or seed) Jackson Track Maintainer, or similar type Kalamazoo Switch Tamper, or similar type Machine Tool Operator Maginnis Internal Full Slab Vibrator Mechanical Berm, curb or gutter (concrete or asphalt) Mechanical Finisher Operator (concrete, Clary-Johnson-Bidwell or similar) Micro Tunnel System (below ground) Pavement Breaker Operator (truck mounted) Road Oil Mixing Machine Operator Roller Operator (asphalt or finish) Rubber-Tired Earth Moving Equipment (single engine, up to and including 25 yds. struck) Self-Propelled Tar Pipelining Machine Operator Skiploader Operator (crawler and wheel type, over 3/4 yd. and up to and including 11f2 yds.) Slip Form Pump Operator (power driven hydraulic lifting device for concrete forms) Tractor Operator - Bulldozer, Tamper-Scraper (single engine, up to 100 h.p. flywheel and similar types, up to and including D-5 and similar types) Tugger Hoist Operator (1 drum) Ultra High Pressure Waterjet Cutting Tool System Operator Vacuum Blasting Machine Operator Welder - General E-8

9 Group 7 Welder - General (Multi-Shift) Group 8 Asphalt or Concrete Spreading Operator (Tamping or Finishing) Asphalt Paving Machine Operator (Barber Greene or similar type) Asphalt-Rubber Distributor Operator Backhoe Operator (up to and including 3/4 yd.) Small Ford, Case or similar. Cast in Place Pipe Laying Machine Operator Combination Mixer and Compressor Operator (Gunite Work) Compactor Operator - self propelled Concrete Mixer Operator - Paving Crushing Plant Operator (Non Portable) Drill Doctor Drilling Machine Operator, Bucket or Auger Types (Calweld 150 Bucket or similar types - Watson 1500, 2000, 2500 Auger or similar types - Texoma 700, 800 Auger or similar types - drilling depth of 60' maximum) Elevating Grader Operator Grade Checker Gradall Operator Grouting Machine Operator Heavy Duty Repairman Heavy Equipment Robotics Operator Kalamazoo Balliste Regulator or similar type Kolman Belt Loader and similar type Le Tourneau Blob Compactor or similar type Loader Operator (Athey, Euclid, Sierra and similar types) Master Environmental Maintenance Mechanic Mobark Chipper or similar types Ozzie Padder or similar types PC 490 Slot Saw Pneumatic Concrete Placing Machine Operator (Hackley-Presswell or similar type) Portable Crushing Plant Operator Pumpcrete Gun Operator Rock Drill or similar types Rotary Drill Operator (excluding Caison type) Rubber-Tired Earth Moving Equipment Operator (single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck) Rubber-Tired Earth Moving Equipment Operator (multiple engine - up to and including 25 yds. struck) Rubber-Tired Scraper Operator (self-loading paddle wheel type - John Deere, 1040 and similar single unit) Self-Propelled Curb and Gutter Machine Operator Shuttle Buggy Skiploader Operator (crawler and wheel type over 11J2 yds. up to and including 6 1 /2 yds.) Soil Remediation Plant Operator (C.M.I. Enviro Tech Thermal or Similar Types) (Oiler Required Group II) Surface Heaters and Planer Operator Tractor Compressor Drill Combination Operator Tractor Operator (any type larger than D flywheel h.p. and over, or similar - Bulldozer, Tamper, Scraper and Push Tractor, single engine) Tractor Operator (boom attachments) E-9

10 Traveling Pipe Wrapping, Cleaning and Bending Machine Operator Trenching Machine Operator (over 6 ft. depth capacity, manufacturer's rating Trenching Machine with Road Miner Attachment (over 6 ft. depth capacity, manufacturer's rating) Ultra High Pressure Waterjet Cutting Tool System Mechanic Water Pull (compaction) Group 9 Heavy Duty Repairman (Multi-Shift) Group 10 Drilling Machine Operator, Bucket or Auger Types (Calweld 200 B Bucket or similar types - Watson 3000 or 5000 Auger or similar types - Texoma 900 Auger or similar types - drilling depth of 105' maximum) Dual Drum Mixer Heavy Duty Repairman-Welder Combination Monorail Locomotive Operator (diesel, gas or electric) Motor Patrol - Blade Operator (single engine) Multiple Engine Tractor Operator (Euclid and similar type - except Quad 9 Cat.) Pneumatic Pipe Ramming Tool and similar types Pre-Stressed Wrapping Machine Operator (2 Operators required) Rubber-Tired Earth Moving Equipment Operator (single engine, over 50 yds. struck) Rubber-Tired Earth Moving Equipment Operator (multiple engine, Euclid, Caterpillar and similar - over 25 yds. and up to 50 yds. struck) Tower Crane Repairman Tractor Loader Operator (crawler and wheel-type over 61J2yds.) Welder-Certified Woods Mixer Operator (and similar Pugmill equipment) Group 11 Dynamic Compactor LDC350 (or similar types) Heavy Duty Repairman-Welder Combination (Multi-Shift) Welder-Certified (Multi-Shift) Group 12 Auto Grader Operator Automatic Slip Form Operator Drilling Machine Operator, Bucket or Auger Types (Calweld, Auger 200 CA or similar types - Watson, Auger 6000 or similar types- Hughes Super Duty, Auger 200 or similar types - drilling depth of 175' maximum) Hoe Ram or similar with Compressor Mass Excavator Operator - Less than 750 cu. yds. Mechanical Finishing Machine Operator Mobile Form Traveler Operator Motor Patrol Operator (multi-engine) Pipe Mobile Machine Operator Rubber-Tired Earth Moving Equipment Operator (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck) Rubber-Tired Self-Loading Scraper Operator (paddle-wheel-auger type self-loading - two (2) or more units) Vermeer Rock Trencher (or similar type) E-10

11 Group 13 Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (single engine, up to and including 25 yds. struck) Group 14 Canal Liner Operator (not less than four (4) employees - Operator, Oiler, Welder, Mechanic, Grade Checker required) Canal Trimmer Operator Remote Controlled Earth Moving Equipment Operator (no one (1) Operator shall operate more than two (2) pieces of earth moving equipment at one time - One Dollar ($1.00) per hour additional to base rate) Wheel Excavator Operator (over 750 cu. yds. per hour) Group 15 Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck) Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (multiple engine - up to and including 25 yds. struck) Group 16 Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (single engine, over 50 yds. struck) Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck) Group 17 Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Push-Pull System (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck) Tandem Tractor Operator (operating crawler type tractors in tandem - Quad 9 and similar type) Group 18 Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - single engine, up to and including 25 yds. struck) Group 19 Rotex Concrete Belt Operator (or similar types) Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, including compaction units - single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck) Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, up to and including 25 yds. struck) Group 20 Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - single engine, over 50 yds. struck) E-11

12 Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar, over 25 yds. and up to 50 yds. struck) Group 21 Rubber-Tired Earth Moving Equipment Operator, operating in Tandem (scrapers, belly dumps, and similar types in any combination, excluding compaction units - multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck) Group 22 Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push- Pull System (single engine, up to and including 25 yds. struck) Group 23 Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push- Pull System (single engine, Caterpillar, Euclid, Athey Wagon, and similar types with any and all attachments over 25 yds. and up to and including 50 cu. yds. struck) Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push- Pull System (multiple engine, up to and including 25 yds. struck) Group 24 Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push- Pull System (single engine, over 50 yds. struck) Rubber- Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push- Pull System (multiple engine, Euclid, Caterpillar and similar, over 25 yds. & up to 50 yds. struck) Group 25 Concrete Pump Operator - truck mounted (Oiler required when boom over los' or 36 meters) Rubber-Tired Earth Moving Equipment Operator, operating equipment with the Tandem Push- Pull System (multiple engine, Euclid, Caterpillar and similar type, over 50 cu. yds. struck) E-12

T.A.T Minimum Wage Scale

T.A.T Minimum Wage Scale General Construction: Construction projects that are funded by the Three Affiliated Tribes or an Enrolled member of the Fort Berthold Reservation. Rates Fringes Electrician $29.24