Juncker Brothers Sales & Service Auction

Transcription

1 Juncker Brothers Sales & Service Auction Auction, Site, and Inspection Location 1601 Mackey Ferry Rd. East Mt. Vernon, IN Auction Thursday, December 13, :00am CST Inspection Wednesday, December 12, :00am 4:00pm CST IMPORTANT INFORMATION LIVE & ONLINE

2 BUYER S PREMIUM: Onsite buyers will be charged 15% buyer s premium. Online buyers will be charged 18% buyer s premium. PAYMENT INFORMATION: Everything is being sold for cash on an AS IS, WHERE IS basis without warranties expressed or implied. All payments must be made by wire transfer, cash, cashier s checks, or company checks. Company checks are only acceptable if accompanied by a bank letter of guarantee. ALL INVOICES MUST BE PAID IN FULL AT THE SALES CONCLUSION. Any merchandise not paid for by this time will be considered abandoned and may be resold by the auctioneer, any loss incurred in the resale to be borne by the original buyer. SALES TAX: All sales subject to 7% state and local sales tax where applicable. If tax exempt, buyer will be required to complete the tax exempt form for the state that the auction is being held. REMOVAL: All items must be removed by Friday, December 21, 2018 by 4:00PM CST at which time our representative will leave the premises. All items remaining after this time WILL BE considered abandoned. CHECKOUT/REMOVAL HOURS: Friday, December 14, 2018 Friday, December 21, 2018 from 8:00AM 4:00PM CST with paid in full invoice. NO MERCHANDIZE MAY BE REMOVED WHILE THE SALE IS IN PROGRESS! ALL BIDDERS MUST COMPLY WITH OUR CUSTOMARY TERMS OF SALE COPIES, WHICH ARE ATTACHED TO THIS CATALOG, AS WELL AS THROUGHOUT THE PREMISES. PPL GROUP LLC 105 Revere Drive, Suite C Northbrook, IL

3 PPL AUCTION General Terms of Sale NOTICE: ALL BIDDERS AND OTHER PERSONS ATTENDING AUCTION SALES AGREE THAT THEY HAVE READ AND HAVE FULL KNOWLEDGE OF THESE TERMS AND AGREE TO BE BOUND THEREBY. 1. REGISTRATION: TO PARTICIPATE AT A LIVE AUCTION, ARRIVE AT THE AUCTION SITE EARLY. A REGISTRATION TABLE WILL BE SETUP WHERE YOU WILL OBTAIN YOUR BIDDER PADDLE. IF YOU ARE UNABLE TO ATTEND THE LIVE AUCTION AND WOULD STILL LIKE TO PARTICIPATE, LOGIN TO AND SEARCH FOR THE AUCTION YOU WISH TO PARTICIPATE IN (CONTROL + F). ONCE YOU LOCATE THE AUCTION, CLICK THE SIGN UP BUTTON. IF YOU HAVE REGISTERED WITH BIDSPOTTER IN THE PAST, ENTER YOUR USERNAME AND PASSWORD. IF YOU HAVE NEVER USED BIDSPOTTER, CLICK ON THE REGISTER BUTTON. ENTER THE REQUIRED CONTACT INFORMATION AND SELECT A USERNAME AND PASSWORD AND SUBMIT FORM. YOU WILL RECEIVE AN CONFIRMATION OF YOUR REGISTRATION FOR THE AUCTION WITH YOUR BIDDER PADDLE NUMBER. YOU WILL ALSO RECEIVE AN APPROVAL FROM THE AUCTION HOUSE ONCE APPROVED. ON THE DATE OF THE AUCTION, LOGIN TO BIDSPOTTER WITH YOUR USERNAME AND PASSWORD. YOU WILL BE ABLE TO VIEW A PHOTO OF EACH LOT WHILE LISTENING TO THE LIVE AUDIO (IF AVAILABLE). BIDDERS ARE RECOMMENDED TO REGISTER 48 HOURS PRIOR TO THE SALE TO AVOID ANY ISSUES THAT MAY OCCUR. 2. IDENTIFICATION: ALL PURCHASERS ARE REQUIRED TO PROVIDE A GOVERNMENT ISSUED ID AND SHALL ALSO GIVE THEIR FULL NAME AND ADDRESS, AS WELL AS ANY AND ALL COMPANY INFORMATION WHEN PRESENT AT OUR AUCTION SITE IN ORDER TO REGISTER. 3. PAYMENT: INVOICES MUST BE PAID IN FULL AFTER SALE UNLESS OTHERWISE SPECIFIED. A BUYER'S PREMIUM OF 18% FOR ON-LINE BIDDERS WILL BE APPLIED TO YOUR INVOICE IN ADDITION TO THE SALES PRICE. THE BUYERS PREMIUM MAY CHANGE WITH EACH INDIVIDUAL AUCTION. ALWAYS REFER TO THE INDIVIDUAL TERMS WITH EACH OF OUR AUCTIONS. BUSINESS AND PERSONAL CHECKS WILL NOT BE ACCEPTED WITHOUT A LETTER OF GUARANTEE FROM YOUR BANK. NO MERCHANDISE WILL BE RELEASED UNTIL INVOICE IS FULLY PAID. 4. TAXES: PRICES MAY NOT INCLUDE ANY FEDERAL, STATE, OR LOCAL TAXES, WHICH ARE IN ADDITION TO THE PURCHASE PRICE AND MUST BE PAID BY PURCHASER. MACHINERY AND EQUIPMENT USED IN THE MANUFACTURING OR ASSEMBLY OF TANGIBLE PERSONAL PROPERTY FOR WHOLESALE OR RETAIL SALE ARE EXEMPT FROM TAX IN THE STATE OF ILLINOIS. OTHERWISE PURCHASER MUST FURNISH A TAX EXEMPTION CERTIFICATE, ANY SALES, USE, EXCISE, OR OTHER SIMILAR TAX, WHERE APPLICABLE, SHALL ALSO BE THE RESPONSIBILITY OF PURCHASER AND MAY, AT THE ELECTION OF PPL, BE ADDED TO THE QUOTED PURCHASE PRICE AND INVOICED BY PPL TO PURCHASER. THE FAILURE OF PPL TO INVOICE SUCH TAXES DOES NOT EXCUSE THE PURCHASER FROM RESPONSIBILITY FOR PAYING SAME. WHEN A SALE IS IN A STATE OTHER THAN THE STATE OF ILLINOIS, THERE WILL BE SPECIFIC INFORMATION RELATIVE TO THE SALES TAX RATES AND ANY EXEMPTION TO THE SPECIFIC AUCTION SALE AND WILL BE POSTED WITH EACH INDIVIDUAL AUCTION SALE ON OUR WEB SITE. 5. REMOVAL: EACH AUCTION WILL HAVE SPECIFIC INFORMATION RELATIVE TO THE TIMES OF REMOVAL. ALL ITEMS MUST BE OFF THE PREMISES BY A SPECIFIC TIME AND DATE. ALL ITEMS REMAINING AFTER THE SPECIFIED TIME WILL BE CONSIDERED ABANDONED. 6. LIABILITY: PURCHASES MAY BE REMOVED ONLY ON PRESENTATION OF PAID BILL. REMOVAL SHALL BE AT THE EXPENSE, RISK AND LIABILITY OF THE PURCHASER. AUCTIONEER SHALL NOT BE RESPONSIBLE FOR GOODS NOT REMOVED WITHIN THE TIME ALLOWED, BUT SHALL HAVE THE OPTION TO REMOVE AND STORE AT THE EXPENSE AND RISK OF THE PURCHASER ANY ARTICLE PURCHASED, BUT NOT PAID FOR AND REMOVED WITHIN THE TIME AFORESAID. A CERTIFICATE OF INSURANCE FOR $1,000,000 IS REQUIRED FOR ALL RIGGERS AND SHOULD BE PRESENTED TO PPL GROUP LLC AT THE AUCTION SITE. IF YOU INTEND TO DO YOUR OWN RIGGING AND USE A POWERED VEHICLE IN THE PROCESS, YOU MUST HAVE A CERTIFICATE OF INSURANCE FOR $1,000,000. IF YOU CAN MOVE YOUR PURCHASES BY HAND OR WITH A NON-POWERED ITEM, SUCH AS A CART, YOU DO NOT NEED TO PRESENT US WITH A CERTIFICATE OF INSURANCE. PPL GROUP LLC IS NOT A RIGGING COMPANY AND THEREFORE WILL NOT BE ABLE TO HELP WITH ANY RIGGING. 7. MANNER OF PAYMENT: ALL CHECKS FOR DEPOSIT AND BALANCES DUE SHALL BE PAYABLE TO THE ORDER OF PPL GROUP LLC. ALL BILLS MUST BE PAID TO REPRESENTATIVES OF THE AUCTIONEER AT THE FACILITY UNLESS OTHERWISE ANNOUNCED. THE FULL PURCHASE PRICE ON ALL LOTS SOLD TO THE SAME BUYER MUST BE PAID WITHIN THE TIME FIXED AND BEFORE REMOVAL OF ANY OF THE GOODS.

4 8. ISSUANCE OF TITLE: TITLES RELATIVE TO TITLED ASSETS PURCHASED WILL BE MAILED TO THE PURCHASER S ADDRESS ON FILE AFTER PAYMENT HAS BEEN RECEIVED AND CLEARED. 9. CONDITION OF ARTICLES SOLD: NEITHER THE AUCTIONEER NOR THE SELLER SHALL BE RESPONSIBLE FOR THE CORRECT DESCRIPTION, GENUINENESS, AUTHENTICITY OF, OR DEFECT IN ANY LOT, AND MAKES NO WARRANTY IN CONNECTION THEREWITH. NO SALE SHALL BE SET ASIDE NOR ALLOWANCE MADE ON ACCOUNT OF ANY INCORRECTNESS, ERROR IN CATALOGING, OR ANY IMPERFECTION NOT NOTED. NO DEDUCTION ALLOWED ON DAMAGED ARTICLES, ALL ARTICLES BEING EXPOSED FOR PUBLIC EXHIBITION, AND SOLD "AS IS" AND WITHOUT RECOURSE. ARTICLES ARE NOT WARRANTED AS MERCHANTABLE OR FIT FOR ANY PARTICULAR PURPOSE, AND NO CLAIM MAY BE MADE BY PURCHASER RELATING TO THE CONDITION OR USE OF ARTICLES PURCHASED OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES ARISING THEREFROM. 10. SAFETY DEVICES: ARTICLES PURCHASED MAY NOT INCORPORATE APPROVED ACTIVATING MECHANISMS, OPERATING SAFETY DEVICES OR SAFETY GUARDS, AS REQUIRED BY OSHA OR OTHERWISE. IT IS PURCHASER'S RESPONSIBILITY THAT ARTICLES PURCHASED BE SO EQUIPPED AND SAFEGUARDED TO MEET OSHA AND ANY OTHER REQUIREMENTS BEFORE PLACING SUCH ARTICLES INTO OPERATION. 11. INDEMNIFICATION: PURCHASER SHALL DEFEND AND INDEMNIFY AND HOLD AUCTIONEER AND SELLER HARMLESS FROM AND AGAINST ALL CLAIMS AND LIABILITIES RELATING TO THE CONDITION OF, REMOVAL OF, OR USE OF THE ARTICLES PURCHASED OR FAILURE OF USER TO FOLLOW INSTRUCTIONS, WARNINGS OR RECOMMENDATIONS OF THE MANUFACTURER, OR TO COMPLY WITH FEDERAL, STATE, AND LOCAL LAWS APPLICABLE TO SUCH ARTICLES, INCLUDING OSHA REQUIREMENTS, AND ENVIRONMENTAL PROTECTION AGENCY REQUIREMENTS, OR FOR PROXIMATE OR CONSEQUENTIAL DAMAGES, COSTS OR LEGAL EXPENSES ARISING THEREFROM. 12. CLAIMS: NO CLAIMS WILL BE ALLOWED AFTER REMOVAL OF GOODS FROM PREMISES OR LEFT ON PREMISES PAST ALLOWED TIME LIMIT. 13. RESPONSIBILITY FOR NON-DELIVERY: NEITHER THE AUCTIONEER NOR THE SELLER, IN ANY EVENT, SHALL BE LIABLE FOR NON-DELIVERY OR FOR ANY OTHER MATTER OR THING, TO ANY PURCHASER OF ANY LOT, OTHER THAN FOR THE RETURN TO THE PURCHASER OF THE DEPOSIT OR SUM PAID ON SAID LOT, SHOULD THE PURCHASER BE ENTITLED THERETO. 14. COMPLIANCE WITH TERMS OF SALE: IN DEFAULT OF PAYMENT OF BILLS IN FULL WITHIN THE TIME THEREIN SPECIFIED, THE AUCTIONEER IN ADDITION TO ALL OTHER REMEDIES ALLOWED BY LAW MAY RETAIN ALL MONIES RECEIVED AS DEPOSIT OR OTHERWISE, AS LIQUIDATED DAMAGES. LOTS NOT PAID FOR AND REMOVED WITHIN THE TIME ALLOWED HEREIN MAY BE RESOLD AT PUBLIC OR PRIVATE SALE WITHOUT FURTHER NOTICE, AND ANY DEFICIENCY, TOGETHER WITH ALL EXPENSES AND CHARGES OF RESALE INCLUDING LEGAL FEES, WILL BE CHARGED TO THE DEFAULTING PURCHASER. 15. RISK TO PERSON AND PROPERTY: PERSONS ATTENDING DURING EXHIBITION, SALE OR REMOVAL OF GOODS ASSUME ALL RISKS OF DAMAGE OF OR LOSS TO PERSON AND PROPERTY AND SPECIFICALLY RELEASE THE AUCTIONEER AND SELLER FROM LIABILITY THEREFORE. NEITHER THE AUCTIONEER NOR HIS PRINCIPAL SHALL BE LIABLE BY REASON OF ANY DEFECT IN OR CONDITION OF THE PREMISES ON WHICH THE SALE IS HELD. 16. ADDITION TO OR WITHDRAWAL FROM SALE: THE AUCTIONEER RESERVES THE RIGHT TO WITHDRAW FROM SALE ANY OF THE PROPERTY LISTED OR TO SELL AT THIS SALE PROPERTY NOT LISTED, AND ALSO RESERVES THE RIGHT TO GROUP ONE OR MORE LOTS INTO ONE OR MORE SELLING LOTS OR TO SUBDIVIDE INTO TWO OR MORE SELLING LOTS. WHENEVER THE BEST INTEREST OF THE SELLER WILL BE SERVED, THE AUCTIONEER RESERVES THE RIGHT TO SELL ALL THE PROPERTY LISTED, IN BULK. 17. SALE BY ESTIMATED WEIGHT, COUNT OR MEASURE: WHEN ITEMS ARE SOLD BY ESTIMATED WEIGHT, COUNT OR MEASURE, THE PURCHASER WILL BE BILLED FOR AND REQUIRED TO PAY FOR THE ESTIMATED WEIGHT, COUNT OR MEASURE. IF, UPON DELIVERY, ANY SHORTAGE EXISTS, THE PURCHASER WILL RECEIVE A REFUND AT THE RATE OF PURCHASE. IF THERE BE AN EXCESS, THE PURCHASER WILL BE REQUIRED TO TAKE AND PAY FOR SUCH EXCESS, AT THE RATE OF PURCHASE. (SEE PARAGRAPH 4 FOR TIME AND GUARANTEE LIMITATION.) 18. DISPUTE BETWEEN BIDDERS: IF ANY DISPUTE ARISES BETWEEN TWO OR MORE BIDDERS, THE AUCTIONEER MAY DECIDE THE SAME OR PUT THE LOT UP FOR SALE AGAIN AT ONCE, AND RESELL TO THE HIGHEST BIDDER. THE AUCTIONEER'S DECISION SHALL BE FINAL AND ABSOLUTE.

5 19. RESERVE: THE AUCTIONEER RESERVES THE RIGHT TO REJECT ANY AND ALL BIDS. ON LOTS UPON WHICH THERE IS A RESERVE, THE AUCTIONEER OR HIS ASSIGNED AGENTS, SHALL HAVE THE RIGHT TO BID ON BEHALF OF THE SELLER. 20. RECORDS: THE RECORD OF SALE KEPT BY THE AUCTIONEER AND BOOKKEEPER WILL BE TAKEN AS FINAL IN THE EVENT OF ANY DISPUTE. 21. INDEPENDENT CONTRACTOR: THE AUCTIONEER IS ACTING AS AN INDEPENDENT CONTRACTOR ONLY AND IS NOT RESPONSIBLE FOR THE ACTS OF ITS PRINCIPALS OR SELLERS. 22. ADDITIONAL TERMS AND CONDITIONS: THE AUCTIONEER MAY ADD OTHER TERMS AND CONDITIONS OF SALE, SUCH ADDITIONAL TERMS AND CONDITIONS TO BE ANNOUNCED PRIOR TO THE AUCTION AND ALSO POSTED WITH THE SPECIFIC AUCTION. This catalogue on the following pages is meant merely as a guide. The auctioneer does not warrant the genuineness, accuracy or count of any items described herein.

6 Lot Number Description 1 Rustoleum Paint Striping Machine (new) 2 DSR Schumacher Pro Series Battery Charger/Starter (new) 3 Mi-T-M 2500 PSI Gas Powered Pressure Washer, Honda 160cc GL Motor (new) 4 Mi-T-M 9720 GPH Semi-Trash Pump, 136 Series Motor with (2) Suction Hoses (new) 5 Agri-Cover Showroom Display Cover 6 Showroom Display Stand 7 Endura Slimline 75 Gallon Diesel Portable Refueling Station, 12 Volt (new) 8 Enduraplas 75 Gallon Diesel Exhaust Fluid Transfer Station, 12 Volt (new) 9 Bencer Diesel Exhaust Fluid Pump Model E12V (new) 10 AG Smart Portable Diesel Exhaust Fluid Transfer Pump Kit (new) 10A LOT: (4) Automatic Refueling Nozzles (new) 11 LOT: (6) 30 lb. Tubs of Kinze Talc Lubricant 12 LOT: (6) Cases of Kinze Powdered Graphite Seed Flow Lubricant 13 LOT: (6) Cases of Kinze Powdered Graphite Seed Flow Lubricant 14 LOT: Assorted Truck Tarp Ties 15 LOT: Display Rack with Stretch Wrap 16 EZ-Up Instant Shelter 17 LOT: 4-Side Display Shelf with Assorted Contents 18 LOT: (5) Assorted Shop Stools 19 LOT: 23 ft. x 12 ft. x 36 in. 2-Side Diamond Plate Parts Department Counter, with Service & Parts Manuals 20 LOT: 26 in. x 84 in. Diamond Plate Work Bench, (2) File Cabinets in. x 26 in. Diamond Plate Table, with Cash Drawer 22 LOT: (9) Steel Shelving Units with Contents of Assorted Parts & Manuals 23 Vidmar 11-Drawer Tooling Cabinet 24 Vidmar 14-Drawer Tooling Cabinet 25 LOT: Assorted Flashlights & (2) Battery Tenders (new) 26 LOT: (2) Drill Bit Indexes, with Bits

7 27 Pro-Lift 5 Gallon Portable Air Tank 28 LOT: Pelouze Digital Scale & (2) Time Clocks 29 LOT: Hydraulic Remote Control Boxes & Couplers 30 LOT: Assorted Hydraulic Couplers 31 LOT: Assorted Yokes & U-Joints Ditchbank Mower PTO & Shaft 33 LOT: Seats, Steering Wheel, Air Cushion Units, Mounting Brackets 34 LOT: Wood Storage Bins with Contents of Filters, Assorted Parts, Manuals 35 LOT: (3) Sections Steel Shelving with Contents of Assorted Hardware, Parts, Threaded Rod, Belts, Parts Bins, etc LOT: (1) Row of Shelving (both sides) with Contents of Hardware, Hubs, Bearing Kits, Bush Hog Parts, Mower Blades, Shafts, Parts Bins, etc. LOT: (1) Row of Steel Shelving (both sides) with Contents of Fertilizer Knives & Accessories, Hardware, Filters, Seals, Chain, Parts Bins, etc. 38 LOT: (1) Row of Steel Shelving (both sides) with Contents of Hardware, Bushings, Pulleys, Sprockets, Couplers, Parts Bins, etc. 39 LOT: Wood Parts Bins with Contents of Knives, Shafts, Scraper Discs, Feed Tubes, etc. 40 LOT: Contents of Room including Assorted Owners Manuals, Service Manuals & Operators Manuals 41 LOT: 9 ft. Wide x 48 in. Deep x 8 ft. High Pallet Rack with Desk, Table & Assorted Contents 42 LOT: Approx. (35) Pry Bars 43 LOT: Approx. (35) Pry Bars 44 LOT: Approx. (35) Pry Bars 45 LOT: Wood Shelving Units with Contents of Welding Supplies, Abrasives, Electrical Supplies, Fire Extinguishers 46 Monarch 8 in. x 32 in. Lathe, with Cross Slide & Tailstock 47 Blacksmith Anvil 48 Blacksmith Anvil 49 Chas. Parker 6 in. Jaw Mechanics Vise 50 Wilton 6 in. Jaw Torpedo Vise 51 LOT: Threading Tools & (2) Large Gear Pullers 52 LOT: Assorted Inspection & Test Equipment 53 Cat 6V9450 Engine Pressure Group Tester 54 Cat 6V2100 Multitach Service Tool

8 55 6 in. Jaw Mechanics Vise 56 Wilton 4-1/2 in. Jaw Torpedo Vise 57 LOT: Right Angle Grinder, 1/2 in. Pneumatic Impact Wrench, (3) Drills 58 Milwaukee 14 in. Cut-off Saw 59 LOT: Assorted Bolt Cutters & Crimper 60 Jet 20 in. Drill Press Model JDP-20MF 61 LOT: Assorted Drill Bits 62 Yale Chain Hoist 63 Black & Decker 8 in. Double End Bench Top Grinder 64 Dayton 7 in. Double End Pedestal Grinder 65 LOT: Dake H-Frame Hydraulic Press, with #3 Arbor Press ft. Wide x 42 in. Deep x 11 ft. High Welded Steel Rack 67 LOT: (3) Vintage Railroad Style Shop Carts 68 LOT: (2) Work Benches with Contents of Assorted Hand Tools, etc. 69 LOT: 41 in. x 58 in. x 1 in. Steel Table with Contents of Assorted Clevis Hooks, etc. 70 LOT: (2) Chain Lifting Slings 71 LOT: Chain Hoist, Chain, Lifting Straps 72 LOT: Shop Vac, Air Tank, Ladder, Fuel Tanks 73 Rolling Flammable Liquid Storage Cabinet 74 LOT: (2) 500/45R20 Tires 75 Norco 1-1/2 Ton Transmission Jack 76 Transmission Jack 77 LOT: Assorted Shop Equipment - Stands & Dollies 78 LOT: 3 Ton Floor Jack, Engine Stand, Bottle Jacks 79 LOT: (6) Assorted Jack Stands 80 LOT: Equipment Stand & Wheel Lift Attachment 81 Pneumatic Jack 82 Pneumatic Jack

9 83 Pneumatic Jack 84 Pneumatic Jack 85 Pneumatic Jack 86 SPX Robinair Cooltech 34700Z Refrigerant Recovery, Recycling & Recharging Station 87 Fluoro Tech Stinger 2000 Refrigerant Recovery System 88 Miller 200 Amp MIG Welder Model Millermatic 250X, with Tank & Extra Wands 89 Miller Plasma Cutting System Model Spectrum Lincoln 400 Amp Arc Welder Model Idealarc, with Lead 91 LOT: Torch Cart with Bottles, Hoses, Gauges, Torch 92 LOT: Torch Unit with Bottles, Hoses, Gauges, Torch 93 LOT: Torch Unit with Bottles, Hoses, Gauges, Torch 94 LOT: Torch Unit with Bottles, Hoses, Gauges, Torch 95 Schumacher Battery Charger/Starter 96 Schumacher Battery Charger/Starter Ton Pneumatic Assist Floor Jack 98 LOT: (2) Echo Weed Wackers 99 LOT: (2) Echo Weed Wackers, Barrel Pumps, Grease Gun 100 Snapper Lawn Mower, 6 HP 101 Scag Wildcat Zero Turn Lawn Mower, with 25 HP Kohler Motor 102 (1) Set Holland Trailer Landing Gear 103 LOT: (3) Pedestal Fans 104 LOT: (3) Pedestal Fans 105 LOT: (9) Steel Parts Indexes with Contents of Screws, Grease Fittings, Roll Pins, Snap Rings, Pop Rivets, Brass Fittings, etc. 106 LOT: Assorted Plastic Parts Bins 107 LOT: Assorted Plastic Parts Bins 108 Weatherhead Coll-O-Crimp Hydraulic Fitting Crimper Model T-420 Super 1, with Dies 109 Cut-off Saw 110 LOT: Contents of Parts Room including Large Quantity of Steel Shelving Units with Contents of Spark Plugs, Springs, Assorted Cable & Fittings, Hydraulic Cylinder Repair Kits, Bearings, etc.

10 111 ATV Warn Winch Kit (new) 112 LOT: Light Box Kit & Snapper Thatcher 113 Radar Assembly Components 114 Emglo Dual 5 HP Horizontal Tank Mounted Compressor on Skid 115 LOT: Assorted Yokes, Shafts & Safety Covers 116 LOT: Assorted Hydraulic Cylinders 117 LOT: Hydraulic Control Valve Assembly, SI Belt Meter & Distributors 118 LOT: Small Engine & Assorted Equipment Parts 119 LOT: Large Quantity of Assorted Filters 120 LOT: Combine & Feeder Parts 121 LOT: Gauge Wheels & Parts 122 LOT: Corn Meters & Feeder Tubes 123 LOT: (4) Crates of Assorted Chisels, Wheels, Arms & Rippers 124 LOT: FCI Cab Insulation Kits, Upholstery Material, Plastic Bins 125 LOT: (3) 11L-15F1 Tires with 8-Lug Rims (new) 126 LOT: (3) 255/70R22.5 Tires (new) 127 LOT: (2) 255/70R22.5 Tires (new) X20SL Tire (new) X16X17.5 Tire (new) 130 LOT: 380/55R16.5 Tire & 8-Lug Rim (new) 131 LOT: (5) Assorted Rims (new) 132 LOT: (4) 22.5X Tires 133 LOT: Rack with Approx. (25) Cases Kinze Talc & Graphite Seed Flow Lubricant 134 LOT: (2) Crates of VWQC9B & 7B Attachments 135 LOT: (3) Crates of Kinze D A & 16341C Parts 136 LOT: (2) Steel Racks with Contents of John Deere Lubricant & Snapper Mower Bag Kits 137 LOT: (6) Assorted Augers 138 LOT: 4 ft. x 8 ft. Sheet of Diamond Plate, (3) Steel Shelving Units

11 139 LOT: Large Wood Parts Bin with Contents of Large Quantity of Farm Implement Parts & Accessories 140 LOT: Large Wood Parts Bin with Contents of Large Quantity of Farm Implement Parts & Accessories 141 LOT: 20 ft. Insulated Container with Side Entry Door, with Electrics & Air Conditioning 142 LOT: Construction Attachments Xtreme Duty Fork Rack & 48 in. Forks 143 LOT: Construction Attachments Xtreme Duty Fork Rack & 48 in. Forks 144 LOT: Construction Attachments Xtreme Duty Fork Rack & 48 in. Forks 145 (1) Set 48 in. Forks 146 (1) Set 48 in. Forks 147 Hercules Forklift Boom Attachment 148 Weighted Tow Bar 149 LOT: (2) Tow Bars 150 Case Drive Unit, on Stand 151 Sweepster Hydraulic Broom Model D32M9, 106 in. Wide 152 SpeeCo Quick Hitch 3-Point Attachment 153 Westendorf Front End Loader Attachment Model TA-28 Plus 154 Westendorf 7 ft. Bucket 155 Bush Hog 84 in. Tag-Along Box Scraper/Grader Model R684 (new) 156 Bush Hog 9 ft. Hydraulic Tilting Offset Grading Blade Model (new) 157 Hurricane Rotary Ditcher Model 3PT.20 (new) 158 Hurricane Rotary Ditcher Model 3PT.20 (new) 159 Genie 500 lb. Manlift Model S-40, S/N S (2006), 4-Cylinder Diesel Power (2968 hours) Case-IH Steiger Tractor Model 500S, S/N ZDF139007, 4WD, 6-Cyl. 12.9L 500 HP Engine, 16-Speed F/2 R Transmission, with PTO, Luxury Cab, GPS/Navigation (2626 hours) 2008 Challenger-CAT Tractor Model 965B, S/N AGCC0965ANTTF1029, 4WD, CAT C HP Engine, 16-Speed F/4 R Transmission, with PTO, Deluxe Cab (9693 hours) 2008 Challenger-CAT Tractor Model 965B, S/N AGCC0965VNTTF1031, 4WD, CAT C HP Engine, 16-Speed F/4 R Transmission, with PTO, Deluxe Cab (9241 hours) 2006 Case-IH Steiger Tractor Model STX 480, S/N Z6F100948, 4WD, Cummins QSX15 6-Cyl. 915 CID 480 HP Engine, 16-Speed F/2 R Transmission, with PTO (7568 hours) 2006 Case-IH Steiger Tractor Model STX 480, S/N Z6F100748, 4WD, Cummins QSX15 6-Cyl. 915 CID 480 HP Engine, 16-Speed F/2 R Transmission, with PTO (5571 hours) 2006 Case-IH Steiger Tractor Model STX 480, S/N Z6F100697, 4WD, Cummins QSX15 6-Cyl. 915 CID 480 HP Engine, 16-Speed F/2 R Transmission, with PTO (8071 hours) 2003 Case-IH Steiger Tractor Model STX 450, S/N JEE , 4WD, Cummins QSX15 6-Cyl. 912 CID 450 HP Engine, 16-Speed F/2 R Transmission (9526 hours)

12 Case-IH Steiger Tractor Model STX 450, S/N JEE , 4WD, Cummins QSX15 6-Cyl. 912 CID 450 HP Engine, 16-Speed F/2 R Transmission (9091 hours) 2004 Case-IH Steiger Tractor Model STX 375, S/N JEE , 4WD, Cummins QSX15 6-Cyl. 912 CID 375 HP Engine, 16-Speed F/2 R Transmission (6231 hours) Case-IH Tractor Model 9280, S/N JEE , 375 HP Diesel, 12-Speed F/3 R Transmission (9617 hours) Case-IH Tractor Model 8950, S/N JJA , 6-Cyl. 505 CID 225 HP Diesel, 18-Speed F/4 R Transmission, with PTO, 3-Pt. Hitch (9969 hours) 171 Case Tractor Model STX 480S, S/N Z6F (as is) Case-IH Axial Flow Combine Harvester Model 8010 AF, S/N HAJ106829, /450 HP Power Boost Engine, Hydrostatic Drive 4-Speed Transmission, 10,695 sq. in. Total Cleaning Area, Self-Leveling Cleaning System, 350-Bushel Grain Tank, Extended Hopper Top, 220/1180 RPM Low/High Speed 30 in. Rotor Diameter, GPS/Navigation (2697 engine hours) 2006 Case-IH Axial Flow Combine Harvester Model 8010 AF, S/N HAJ106963, /450 HP Power Boost Engine, Hydrostatic Drive Transmission, 10,695 sq. in. Total Cleaning Area, Self-Leveling Cleaning System, 350-Bushel Grain Tank, 220/1180 RPM Low/High Speed 30 in. Rotor Diameter, GPS/Navigation (2139 engine hours) 2001 Case-IH Axial Flow Combine Harvester Model 2388, S/N JJC , HP Engine, Hydrostatic 3-Speed Transmission, Hydraulic Power Disc Brakes, 30 in. Rotor Diameter, Variable Low/Medium/High Speed, 7947 sq. in. Cross Flow Cleaning System, 210- Bushel Grain Tank (2983 engine hours) 2001 Case-IH Axial Flow Combine Harvester Model 2366, S/N JJC , 240 HP, Hydrostatic 3-Speed Transmission, 180-Bushel Grain Tank, 5918 sq. in. Cleaning Area, 110 in. x 24 in. Rotor 1997 Case-IH Axial Flow Combine Harvester Model 2188, S/N JJC , 260 HP, Hydrostatic 3-Speed Transmission, 210-Bushel Grain Tank (3731 engine hours) 1995 Case-IH Axial Flow Combine Harvester Model 2188, S/N JJ , 260 HP, Hydrostatic 3-Speed Transmission, 210-Bushel Grain Tank 178 Case-IH Axial Flow Combine Harvester Model 1660, S/N JTC (4070 hours) 179 Case-IH Axial Flow Combine Model 1680 (as is) 180 Case-IH Axial Flow Combine Model 1660 (as is) 181 Case-IH Axial Flow Combine Model 2188 (as is) 182 Case-IH Axial Flow Combine Model 1680 (as is) 183 Case-IH Axial Flow Combine Model 1680 (as is) 184 LOT: Case-IH Platform Header Model N76 BK, S/N CBJ021607, with 35 ft. Bean Head Reel, on Unverferth HT36 Header Trailer 185 LOT: Case-IH Platform Header Model N78 CJ, S/N CBJ023798, with 30 ft. Bean Head Reel, on Header Trailer 186 LOT: Case-IH Platform Header Model N76 BK, S/N CBJ041363, with 35 ft. Bean Head Reel, on Unverferth HT30 Header Trailer 187 LOT: Case-IH Platform Header Model N76 BK, S/N CBJ021651, with 35 ft. Bean Head Reel, on J&M Header Trailer 188 LOT: Case-IH Corn Head Model N80 DE, S/N CBJ024962, 8-Row 30 in. Spacing, on Unverferth HT30 Header Trailer 189 LOT: Case-IH Corn Head Model N79 CE, S/N CBJ031052, 6-Row 30 in. Spacing, on Unverferth HT30 Header Trailer 190 Case-IH Corn Head Model N93 DE, S/N YAS023101, 8-Row 30 in. Spacing 191 Case-IH Corn Head Model N80 DE, S/N CBJ030888, 8-Row 30 in. Spacing 192 Case-IH Corn Head Model N93 DE, S/N YAS018237, 8-Row 30 in. Spacing 193 Case-IH Corn Head Model N80 DE, S/N CBJ024956, 8-Row 30 in. Spacing

13 194 Case-IH Corn Head, 12-Row 30 in. Spacing 195 Case-IH Corn Head, 12-Row 30 in. Spacing 196 Case-IH Corn Head Model 1083, 8-Row 30 in. Spacing 197 Case-IH Corn Head Model 1083, 8-Row 30 in. Spacing 198 Case-IH Corn Head Model 1083, 8-Row 30 in. Spacing 199 Case-IH Corn Head Model 1083, 8-Row 30 in. Spacing 200 Case-IH Corn Head Model 1063C06000BJ, S/N JTC , 6-Row 30 in. Spacing 201 Case-IH Corn Head Model 1083, 8-Row 30 in. Spacing 202 Case-IH Corn Head Model 1083, 8-Row 30 in. Spacing 203 John Deere Corn Head Model 653, 6-Row 30 in. Spacing 204 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 205 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 206 Case Platform Header Model 1020, with 25 ft. Bean Head Reel 207 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 208 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 209 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 210 Case Platform Header Model 1020, with 20 ft. Bean Head Reel 211 Case Platform Header Model 1020, with 25 ft. Bean Head Reel 212 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 213 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 214 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 215 Case-IH Platform Header Model N76 BK, S/N CBJ041372, with 35 ft. Bean Head Reel 216 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 217 Case Platform Header Model 1020, with 30 ft. Bean Head Reel 218 Case Platform Header Model 1020, with 20 ft. Bean Head Reel 219 Unverferth 35 ft. Header Trailer 220 Unverferth 35 ft. Header Trailer 221 Woodworth 35 ft. Header Trailer

14 222 Whayne 30 ft. Header Trailer 223 P-K 30 ft. Header Trailer ft. Header Trailer White 12/13-Row Flex Frame Model 6342 with Markers, S/N , with Corn & Bean Seed Plates, No-Till Coulters John Deere 13-Row Flex Frame Model 1780 with Markers, S/N H01780F675138, Hydraulic Drive, Vacuum Seed Meter, No-Till Coulters, Corn & Bean Seed Plates 227 John Deere Planter Model DMI Yield-Till System Model Ecolo-Tiger 730B, S/N Vetter Systems One Seed Tet II Wagon Schmeiser 40 ft. Hydraulic Grading Blade Model SGM Black Machinery Planter 232 Black Machinery Planter Reynolds Pull-Behind Scraper Model 17GS12, S/N Massey-Ferguson Diesel Yard Forklift Model H Kinze Seed Meter Test Stand Model T AW Agricultural Dynamometer Engine Test System, DynaPro 2100S Control Model MEB800, S/N CD-8089, 800 HP at 1000 RPM, 4000 ft. lb. Capacity Case 8000 lb. Rough Terrain Diesel Forklift Model 588H, S/N JJGN580HTCC570053, 210 in. Reach, 3-Stage Mast, Side Shift (1892 hours) Yale 4000 lb. LP Forklift Model GLC0405VXNUAE094, S/N C809V06895L, Solid Tires, 3-Stage Mast, Side Shift, Hydraulic Fork Positioners, Automatic Transmission (613 hours) Yale 4000 lb. LP Forklift Model GLC0405VXNUAE094, S/N C809V06881L, Solid Tires, 3-Stage Mast, Side Shift, Hydraulic Fork Positioners, Automatic Transmission (593 hours) 240 LOT: (4) Tractor Tires with Rims 241 LOT: (4) Tractor Tires with Rims 242 LOT: (4) Tractor Tires with Rims 243 LOT: (4) Tractor Tires with Rims 244 LOT: (4) Tractor Tires with Rims 245 LOT: (2) Tractor Tires with Rims 246 LOT: (2) Sets Stabilizer Wheels with New Tires 247 LOT: Assorted Machinery Brackets 248 Cummins 6-Cylinder Diesel Motor Model QSX (2010), on Stand (status unknown) 249 Cummins 6-Cylinder Diesel Motor Model QSX (2012), on Stand (status unknown)

15 250 6-Cylinder Diesel Short Block (status unknown) Cylinder Diesel Motor (rebuildable) 252 Powershift Transmission (status unknown) 253 Powershift Transmission (status unknown) 254 Powershift Transmission (status unknown) 255 LOT: Powershift Transmission Parts 256 Axle Differential Unit (status unknown) 257 LOT: Axle Assemblies 258 LOT: Axle Assemblies 259 LOT: (2) Crank Shafts 260 Radiator 261 LOT: Assorted Drive Parts in. x 84 in. Steel Work Bench 263 LOT: 49 in. x 78 in. Heavy Duty Rolling Steel Work Bench with Contents of Scrap Metal 264 LOT: Assorted Equipment & Engine Parts, Turbos, etc. on (6) Pallets 265 LOT: Combine Parts on (4) Pallets 266 LOT: Combine Parts on (2) Pallets 267 LOT: Combine Parts on (2) Pallets 268 LOT: Combine Parts on (2) Pallets 269 LOT: Combine Parts on (2) Pallets 270 LOT: Assorted Tractor & Farm Implement Parts 271 LOT: Assorted Farm Implement Parts in (6) Crates 272 LOT: Assorted Farm Implement Parts on (9) Pallets 273 LOT: Assorted Farm Implement Parts on (9) Pallets 274 LOT: Assorted Engine Hydraulic Parts on (6) Pallets 275 LOT: Assorted Farm Implement Parts on (8) Pallets 276 Liquid Fertilizer Pump System 277 (1) Set Stabilizer Wheels (new tires)

16 278 (1) Set Stabilizer Wheels (new tires) 279 (1) Set Stabilizer Wheels (new tires) 280 Farm Implement 281 Alkota Electric Driven Gas Fired Hot Water Pressure Washer Model 4301 NG UL, 3000 PSI 282 Emglo 5 HP Horizontal Tank Mounted Air Compressor 283 Combine Transition Frame Assembly 284 Combine Transition Frame Assembly 285 Tractor Grill Guard Assembly 286 LOT: Assorted Tractor & Engine Parts on (12) Pallets 287 LOT: Assorted Tractor Drive Parts on (8) Pallets 288 LOT: Assorted Farm Implement Parts on (8) Pallets 289 LOT: Case Body Work & Panels 290 LOT: (6) Steel Shelving Units with Contents of Assorted Parts, Tools & Hardware 291 Economy Portable Hand Crank Manlift 292 Pallet Jack 293 LOT: 6 ft. Fork Extensions & Safety Rack 294 LOT: Crate with Assortment of Large Cable Lifting Slings 295 Kawasaki Powered Portable Gas Pressure Washer 296 Gas Powered Concrete Float 297 Dayton 8 in. Double End Pedestal Grinder in. x 172 in. x 1 in. Steel Work Bench, Shelving Unit with Contents of Assorted Parts & Tools in. x 57 in. x 1 in. Rotating Steel Fabrication Table 300 LOT: (2) Assorted Steel Stands 301 Ex-Cell 7000 Watt, 14 HP Portable Gas Powered Generator 302 Hydraulic Wheel Lift 303 Rotating Engine Stand 304 Rotisserie Stand 305 LOT: (3) Rolling Equipment Stands

17 306 Hobart Stickmate Arc Welder 307 LOT: (2) Parts Washers 308 Electric Transfer Pump System 309 Electric Transfer Pump System 310 Electric Transfer Pump System 311 LOT: 40 in. x 172 in. x 1 in. Steel Work Bench with Vise & Contents of Assorted Hardware 312 LOT: Assorted PTO Shafts 313 LOT: Assorted PTO Shafts 314 LOT: Assorted PTO Shafts 315 LOT: Assorted PTO Shafts 316 LOT: (6) Sections 8 ft. Wide x 42 in. Deep x 20 ft. High Pallet Rack 317 LOT: (7) Sections 8 ft. Wide x 42 in. Deep x 20 ft. High Pallet Rack 318 LOT: (6) Sections 8 ft. Wide x 42 in. Deep x 20 ft. High Pallet Rack 319 LOT: (3) Sections 8 ft. Wide x 42 in. Deep x 20 ft. High Pallet Rack 320 LOT: (30) Liquid Containment Totes 321 Unverferth Auger Assembly 322 LOT: Assorted Tow Bars & Frames 323 Auger Assembly 324 LOT: Assorted Farm Implements 325 LOT: Assorted Farm Implements 326 LOT: Assorted Farm Implements 327 LOT: Steel Rack with Contents of Case Panels 328 Energy Logic Waste Oil Heating System 329 LOT: Assorted Tow Bars, Augers, Hydraulic Cylinders, Repairable Gas Motors, etc. 330 LOT: P40 Unit, Clutch Shift, (2) 3-Point Hitch Attachments 331 LOT: Large Quantity of Scrap Metal & Equipment (directly behind rear building - excludes tires) 332 LOT: Large Quantity of Tires (directly behind rear building) 333 LOT: GMC Flatbed with Contents (no title)

18 334 LOT: Assorted Wheel Weights, Supplies & Scrap 335 LOT: Contents of Room including Wiring Harnesses, Machine Parts, Filters, etc. (nothing attached to walls) 336 LOT: (2) Folding Tables with Large Assortment of Electronic Controls, Instrument Panels, Service Manuals, Lights, CB Radios 337 LOT: 4 ft. x 12 ft. Conference Table with (8) Executive Chairs, Small Table with (3) Chairs 338 LOT: Contents of (4) Offices including (4) Desks, (2) File Cabinets, (10) Assorted Chairs 339 Scotsman Prodigy Automatic Ice Maker 340 LOT: Refrigerator, Microwave Oven, Dishwasher, Double Oven 341 Pepsi Machine (with key) 342 Snack Machine (with key) 343 LOT: Zebra Printer Model ZP450, (4) Card Readers 344 LOT: Assorted DVDs 345 LOT: Assorted Case Service Manual CDs 346 LOT: Assorted Case Operators Manual CDs 347 LOT: (8) Monitors 348 LOT: (7) Monitors 349 LOT: (9) Computer Towers (no hard drives) 350 LOT: (21) NEC Phone Handsets 351 LOT: Assorted Keyboards, Calculators, Fans, Paper Shredder & Office Supplies 352 Xerox Printer Model WorkCenter Xerox Printer Model WorkCenter LOT: (4) Assorted HP Printers 355 LOT: Contents of Office & Reception Area including (4) Desks, (1) Tooling Cabinet, File Cabinets, etc. (furniture only)