5 PIECE PLAY CENTER Assembly Instructions

Transcription

1 + 5 PI PLY NTR ssembly Instructions Top of train ront of cab Up front toy box hair Side of train * Important: Retain these instructions for future reference. * Please note that this product must be assembled by adults only * UP front toy box dimension of -1/8 in. ( 0mm ) in length and -/1 in. ( mm ) in width and 11-1/2 in. ( 292 mm ) in height. The maximum weight-bearing for the Up front toy box is 11 lbs / 5 kgs. * ront of cab dimension of 1-/4 in. ( 450 mm ) in length and -/8 in. ( 5mm ) in width and 20-1/2 in. ( 520 mm ) in height. * hair dimension of 11-/8 in. ( 00mm ) in length and 9-1/4 in. ( 25mm ) in width and -1/8 in. ( 40 mm ) in height. The maximum weight-bearing for hair is lbs / 9. kgs, and the maximum weight-bearing for inside of the chair is 11 lbs / 5kgs. * Side of train dimension of 29-5/1 in. ( 45 mm ) in length and -/1 in. ( 5 mm ) in width and -1/8 in. ( 0 mm ) in height. The maximum weight-bearing for the toy box of the side of train is 55 lbs / kgs. * Top of train dimension of 1-1/2 in. ( 800 mm ) in length and -1/8 in. ( 0 mm ) in width and 22-/4 in. ( 50 mm ) in height. * efore assembly, inspect 5 PI PLY NTR for damaged hardware, loose joints, missing pieces or sharp edges. * O NOT use 5 PI PLY NTR if any parts are missing or damaged. o not substitute parts. Please contact * Note: Please read instructions before starting to assemble * ny questions or assistances needed, please browse our website at * Thank you for your purchase of LLINUN product. or safety and long lasting usage, please follow the instructions provided for assembly. Page 1 of

2 ssembly ccessories hart 5 PI PLY NTR ssembly Instructions mm 11 2mm 11 2mm 11mm mm 2 45mm mm mm mm 24 mm 0 285mm 448 4mm 448 4mm 28 mm 5 190mm 5 190mm 5 222mm 558 mm mm 0 50mm 0 mm 50 24mm 5 85mm 4 45mm mm 5 mm 2PS ssembly ccessories Hardware hart 2 28mm 50 mm 240 0mm 8 X mm X mm 2X 4 mm 24PS 24 PS 44 X mm 8 PS 8 PS 1 PS 40 PS G H I X 4 mm 4 PS 2 PS 1 P 8 PS X mm 20PS O NOT use 5 PI PLY NTR if any parts are missing or damaged. O NOT substitute parts. US N MINTNN: * Use on level surfaces only * Please check assembly at regular intervals, and frequently tighten hardware if necessary. if maintenance is not carried out, the product could cease to function properly. Page 2 of

3 5 PI PLY NTR ssembly Instructions Up ront toy box assembly Step 1 4 Step-1-omplete 4 Step-1 Up ront toy box assembly Step 2 ( Step-2-1 / Step-2-2 / Step-2- ) Step-2-omplete Step-2-1 Step-2-2 Step-2- Page of

4 5 PI PLY NTR ssembly Instructions Up ront toy box assembly Step Up front toy box omplete assembly Step- * O NOT play inside the Up front toy box as this is a toy box. * The maximum weight-bearing of the Up front toy box is 11 lbs / 5 kgs. hair assembly Step 4 H H Step-4-omplete Step-4 Page 4 of

5 5 PI PLY NTR ssembly Instructions hair assembly Step 5 I I correct G G G Incorrect I Step-5 I G IMPORTNT: hair lid support mechanism must be installed properly ( hair assembly step 5 ), otherwise slamming on head/neck situation may occur. heck to make sure the Lid Support is properly installed by moving it back and forth. When you let go of the lid it should stop, not fall or slam shut. G G Step-5-omplete hair assembly Step ( Step--1 / Step--2 ) Step --1 Step omplete assembly Step Page 5 of

6 hair assembly Step ( Step--1 / Step--2 ) ssembly Instructions Step Step --2 hair omplete assembly 8 10 *O NOT stand or jump on the product, nor use it as a stepladder. * The maximum weight-bearing for hair is lbs( 9. kgs), and the maximum weight-bearing for inside of the chair is 11 lbs / 5kgs. IMPORTNT: hair lid support mechanism must be installed properly ( hair assembly step 5 ), otherwise slamming on head/neck situation may occur. heck to make sure the Lid Support is properly installed by moving it back and forth. When you let go of the lid it should stop, not fall or slam shut. ront of cab assembly Step 8 ( Step-8-1 / Step-8-2 / Step-8- /Step-8-4 ) 5 PI PLY NTR Step-8-omplete Step -8-1 Step -8-2 Step -8- Step -8-4 Page of

7 ssembly Instructions ront of cab assembly Step 9 ( Step-9-1 / Step-9-2 / Step-9- ) Step PI PLY NTR Step- 9-2 Step- 9- ront of cab assembly Step10( Step-10-1 / Step-10-2 / Step-10- ) Step-9-omplete 1 1 Step-10-omplete 1 Step Step Step- 10- Page of

8 ssembly Instructions ront of cab assembly Step 11 ( Step-11-1 / Step-11-2 / Step-11- ) 1 29 UTION Step PI PLY NTR 1 Step-11-2 Step-11- O NOT stand, jump, climb up, or seat on the ront of cab nor use it as a stepladder. Top of train assembly Step ( Step--1 / Step--2 / Step-- / Step--4 ) 1 1 ront of cab omplete assembly Step--omplete 22 Step--1 Step--2 Step-- Step--4 Page 8 of

9 5 PI PLY NTR ssembly Instructions Top of train assembly Step ( Step--1 / Step--2 / Step-- ) Step Step Step--omplete Step-- Top of train assembly Step ( Step --1 / Step--2 ) 20 Step Step--2 Top of train omplete assembly UTION: * O NOT stand or jump on the product, nor use it as a stepladder Page 9 of

10 5 PI PLY NTR ssembly Instructions Side of train assembly Step 2 2 Step - Step--omplete Side of train assembly Step 1 ( Step-1-1 / Step-1-2 ) Step-1-1 Step Step-1-omplete Page 10 of

11 Side of train assembly Step-1 ( Step-1-1 / Step-1-2 ) 5 PI PLY NTR ssembly Instructions 28 2 UTION: Step-1-1 * O NOT play inside of Side of train as this is a toy box. * The maximum weight-bearing of the Side of train is 55 lbs / kgs. 2 Step Side of train omplete assembly 2 24 orrect positioning for each part Top of train ront of cab Up front toy box hair Side of train Page 11 of

12 omplete ssembly 5 PI PLY NTR ssembly Instructions UTION: * o not play inside the Up front toy box and Side of train as this is a toy box. * o not stand, jump, climb up, or seat on the Top of train and ront of cab, nor use it as a stepladder. IMPORTNT INORMTION: * Please keep away f rom children under three years old. * The maximum weight-bearing for the Up ront toy box is 11 lbs / 5 kgs. * The maximum weight-bearing for the hair is lbs / 9. kgs, and the maximum weight-bearing for inside of the chair is 11 lbs / 5 kgs. * The maximum weight-bearing for the Side of train is 55 lbs / kgs. * O NOT stand or jump on the product, nor use it as a stepladder * hair Lid support mechanism must be installed properly ( hair assembly step 5 ), otherwise slamming on head/neck situation may occur. heck to make sure the Lid Support is properly installed by moving it back and forth. When you let go of the lid it should stop, not fall or slam shut. US N MINTNN: * Regularly check all f astenings to ensure that they are properly tightened. * lways use the product on a f lat, level, stable surf ace. * esigned for indoor use only. Please do not leave this product in a wet or high humidity place. * Wipe with a damp cloth. Page of

13 STM 9 / STM / PS / PSI alifornia 90 compliant for formaldehyde phase 2 VR-RIGHT GITS OMPNY LIMIT. -5, NO. 91, ZHOHNGSHN 2 N R., QINZHN IST., OHSIUNG ITY 80, TIWN esigned in US. M IN HIN Page of