MANUAL. Protein skimmer with external pump. Protein skimmer with internal pump ZL-SKIMMER-MANUAL-V1.0

Transcription

1 PROTEINSKIMMER MANUAL ZL-SKIMMER-MANUAL-V1.0 Protein skimmer with internal pump Protein skimmer with external pump

2 SD2500 SD2500E Low voltage DC/ frequency conversion Low voltage DC/ frequency conversion Flow: L/H Flow: L/H Max air intake:2000l/h Max air intake:2000l/h Recommended tank size: l Recommended tank size: l Dimension:380x310x610mm Dimension:380x420x610mm mm mm SD3000 SD1500 SD1500E Flow: L/H Flow: L/H Max air intake :900L/H Max air intake:900l/h Recommended tank size: l Recommended tank size: l Dimension:250x220x520mm Dimension:250x275x520mm mm mm SD SD2000E Flow: L/H Flow: L/H Max air intake:1600l/h Max air intake:1600l/h Recommended tank size: l Recommended tank size: l Dimension:320x280x560mm Dimension:320x370x560mm mm mm SD3000E Low voltage DC/ frequency conversion Low voltage DC/ frequency conversion Flow: L/H Flow: L/H Max air intake:2500l/h Max air intake:2500l/h Recommended tank size: l Recommended tank size: l Dimension:420x355x660mm Dimension:420x470x660mm mm mm SD2600E Flow: L/H Max air intake:2500l/h Recommended tank size: l Dimension:410x430x730mm mm 02

3 GETTING STARTED Package Content Safety Guidelines For your personal safety and to use this product properly, please read this instruction carefully before using the product. Package of Protein Skimmer with internal pump Package of Protein Skimmer with external pump The power socket must be equipped with leakage protector (prepared by users) when using this product and the leakage current must not exceed 30mA. Always leave a drip loop between the WiFi control box and the power socket to prevent leakage. Drip Loop 1 x1 1 x1 2 x1 2 x1 Don't use this product in flammable or corrosive liquid. To avoid electric shock, it is prohibited to put the control box and the power adapter into water. 3 x1 4 x1 5 x1 6 x1 7 x1 3 x1 4 x1 5 x1 6 x1 7 x1 11 x1 12 x1 Please don't install or store this equipment in the environment where it is exposed to weather, strong UV or temperature lower than 0. Before operating this product, please install all of its the accessories properly and place it into the sump vertically. Please make sure water level in the sump is within the specified range. When operating this product, make sure that there is no abnormal water level fluctuation, keep the air hose open and adjust water level in the protein skimmer. Our company is not responsible for any injury or damage to persons or equipment caused by mishandling of this product. 8 x1 13 x 1 9 x1 10 x1 14 x1 11 x1 12 x1 15 x1 8 x1 13 x1 9 x1 10 x1 1 4 x1 If this product is damaged, please have it repaired or replaced by a professional

4 SD1500/SD2000/SD2500/SD3000 Installation Sketch Map SD1500E/SD2000E/SD2500E/SD3000E Installation Sketch Map Top cover Collection cup Adjusting pipe Plug Skimmer body Top cover Collection cup Adjusting pipe Plug Draining tube Muffler clamp Skimmer body Draining tube Muffler Muffler clamp Outlet pipe Air hose Muffler Outlet pipe Air hose Air intake device Titanium alloy secrew Titanium alloy screw Bubble plate Nylon screw Air intake device Rubber foot Bubble skimming chamber Outlet fitting Pump Nylon screw Pump Pump mount Bubble skimming chamber Skimmer base Skimmer base 05 06

5 APP Operation Setting Connect to controller in AP mode Horizon Aqua ZETLIGHT and the ZETLIGHT logo are trademarks of the ZETLIGHT HOLDINGS COMPANY Google Play is a trademark of Google Inc. Horizon Apple and the Apple logo are trademarks of Apple Inc, registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Components made in China (Mainland China and Taiwan) and America. Manufactured by the ZETLIGHT HOLDINGS COMPANY , Guangzhou, China. AP Mode Go to Settings > WiFi on your smartphone or tablet. Choose Z-SKIMMER _XXXXXX Enter Password: (eight zeros) and click on Join. Once you are connected (Indicator stays solid blue),start the Horizon Aqua App. Addaproteinskimmer Click to Add new protein skimmer Select Select 07 08

6 Date and Time setting Control Panel STA Mode Power Button ON/OFF Slide digits up or down to set year, month, day. Slide digits up or down to set hour, minute. Select OK to confirm. Circular Slider Adjusttheworkingflow oftheproteinskimmer Connect to home router in STA mode ON/OFF ON/OFF Click on Menu Select WIFI Select your homerouter. Protein Skimmer is ON. Protein Skimmer is OFF

7 Reset to factory settinge Enter Password and select OK. Wait for a short moment and returnto the opening screen of the App. Go to Settings > WiFi Click on Menu on your smartphone and select your WiFi router. On your controller the indicator will quickly flash blue. Deleteaproteinskimmer Select Delete Trouble Shooting Regularly check and clean the inside of the protein skimmer. If the product cannot work properly, please refer to the solutions below. Problem Checking Item Solution Check if water level in the sump is low Raise water level in the sump Select Reset Click OK button to reset the PROTEIN SKIMMER Click on Menu Bubbles cannot go to the collection cup. Bubbles inconsistently go up and down Check if water level in the protein skimmer is low Check if there is abnormal water level fluctuation in the sump Check if the air hose of the protein skimmer pump is bent or blocked Raise water level in the protein skimmer by adjusting water flow of the protein skimmer, or adjust water flow of the pump Make sure there is no abnormal water level fluctuation in the sump Remove the foreign matter to make sure the air hose is open 11 Very few bubbles Check if there is foreign matter in the water inlet of the protein skimmer pump Remove the foreign matter 12

8 Bubbles spill out of the collection cup The pump does not work Check if there is waste that has not been cleaned for a long time Check if water level in the protein skimmer is raised Check if it is not connected to power Check if there is a loose plug Check if the needle brushes are jammed by debris Check if the blue indicator on the control box stays on or flashes Check if the switch button on the APP is switched off or if the power level is set to zero Product Indicator And Reset Button Product Features Reset button Clean the waste timely Adjust water flow of the water outlet or the pump Connect it to power Tighten the plug Remove the debris that jams the needle brushes Disconnect the power or reset the protein skimmer Open the APP to switch on the button or adjust the working power Indicator Power on the protein skimmer and the indicator will "slowly flash blue". If it works properly, the indicator will "stay on blue or quickly flash blue". Reset to Default Settings Press and hold the Reset Button for 3 seconds or click the reset button on the paired APP. If the indicator continuously quickly flashes blue, it suggests reset successfully. During the reset rocess, the indicator will slowly flash blue and restore AP mode. All the protein skimmer parameters will be reset to default settings. Warranty Card Dear user: In order to use and enjoy our product, and benefit from excellent after-sale service, please read the product instructions carefully, and keep this card in a safe place. Product Warranty: This Warranty Card is the only proof of warranty, and it should be stamped by the company it was purchased from. Please contact the company you purchased this unit from with any warranty issues. Warranty Exclusions: This warranty is invalid if: 1) you cannot provide the warranty card or a valid sales document, or it is altered, or is not the correct product. 2) the product has been damaged by misuse, abnormal use, taking apart by yourself, its appearance has been altered, and other human factors. 3) the product has been damaged as a result of incorrect assembly, use or maintenance due to a failure to follow the instructions and diagrams. 4) it is due to normal wear and tear of consumable parts. 5) it has failed or been damaged by natural disasters or other force majeure, such as earthquake, fire, typhoon, thunder etc. We accept no responsibility for damage to relevant equipment, animals or furniture from other companies. The service covered under this warranty is free. We will only charge for servicing the unit if the warranty card has expired or the service is not covered under warranty. The warranty card and sales receipt should be provided at the time of claim. AP Mode (Access Point) Under AP mode, the indicator will stay on blue. A device named Z-SKIMMER-XXXXXX will be found on the mobile phone's WIFI list. Enter the default password to connect. Open the APP and you can control the protein skimmer accordingly. STA Mode (Station) Under STA mode, the indicator will quickly flash blue. When the protein skimmer and the mobile phone are connected to the same router, open the APP and you can control the protein skimmer accordingly. 13 Product Model Number Customer Phone Address Purchase Date Dealer Item Serial Number Company Chop 14