Pirate Brand. The Perfect Storm. for all media types. Product Line Brochure. Complete Mobile Blasting System. Proudly Distributed By: Rev.

Transcription

1 Pirate Brand The Perfect Storm TM Complete Mobile Blasting System Proudly Distributed By: for all media types Never use abrasives containing silica as they are a respiratory health hazard. Product Line Brochure Rev. Jan 16

2 A Complete Blasting Operation On Wheels Soda Storm Blaster The Soda Storm is the most advanced small blaster available from Pirate Brand. It boasts all top-quality components and an arsenal of productivity boosting features. It is designed to blast with all types of media* including soda and other soft abrasives. The C.M.B.S. comes standard with a 3.5 cu ft Soda Storm Blaster but is available with the larger 6.5 cu ft version. Some of the features of the Soda Storm are: APVII Premium Metering Valve with multi-port and standard sleeves included for achieving the perfect flow rate. Moisture separator with 50 micron filter element Galvanized piping for corrosion resistance Heavy duty full port ball valves Sanitary clean-out coupling provides easy removal of metering valve for maintenance Abrasive flow assist vibrator with controls Pressure regulator with liquid filled gauge Differential pressure gate valve provides precision control over your abrasive flow rate Blow-down muffler reduces noise 150 psi (10.3 bar) pressure vessel - A.S.M.E. Section VIII Division 1 & CRN for all provinces Manual case to keep manual close and protected Lid and screen to keep pressure vessel free of debris and contaminants. Valve guard to protect valves and gauges *Never use abrasives containing silica as they are a respiratory health hazard Included Accessories The Perfect Storm C.M.B.S. comes with an assortment of accessories to get you up and running quickly. Just add media and fuel and you re in business. Accessories included are: 50 of ergoflex blast hose w/twinline, pneumatic #2 control handle and WIN water induction nozzle Nova2000 Respirator WITH COOL TUBE to keep your operator blasting comfortably 50 of breathing airline hose Spare pack of inner lenses, outer lenses, and tear-aways for the Nova2000 Respirator Blast suit Luxury double palmed leather blasting gloves ADPB-250 Air Dryer The high efficiency Air Dryer included on the Perfect Storm C.M.B.S. keeps the air flowing to the blaster and the breathing filter cool and dry. The result is a more reliable and longer lasting system that does not clog due to wet abrasive or wear out prematurely due to moist air running through the piping, valves & control system. Features include: Epoxy internal coating for long life Low pressure drop Sight windows to view desiccant level Aux. connection Airline Filter The included radex airline filter uses a 6 stage filter cartridge that removes moisture, particulates to 0.5 micron & odor from the air being sent to the respirator. Filter located on the air dryer frame Compressor To power the Perfect Storm C.M.B.S. we chose a compressor that is up to the demands of abrasive blasting. The Sullivan Palatek D185P2JD single stage, rotary screw compressor has been positioned on the trailer to allow easy access to the controls and fuel tank as well as all maintenance areas. Features include: 185 cfm (5.2 m3/min) rated delivery 100 psig (700kPa) rated operating pressure 4 cylinder diesel John Deere engine Automatic shutdown protection system Exterior drains for fuel, engine oil, coolant & compressor oil 21 gal (79.5 L) fuel tank capacity 49 horsepower rated horsepower Fuel consumption gal/hour (11 L/hour) Containment frame with drain ports on all 4 corners Noise level max of 76dBA at 7 meters 3 year Sullivan Palatek warranty Weights & Dimensions Toolbox The included toolbox with stainless steel padlocks is the perfect place to store your blasting accessories and hoses. At Pirate Brand, we know abrasive blasting and have used our knowledge and experience to bring you products that not only perform exceptionally well, but also include features that make the job easier and more convenient. 109 Overall Height 6 tongue length 700 lbs tongue weight 82½ Overall Width 14,000 lbs GVW Trailer 16 length usable bed 9,200 lbs fully fuelled (does not include weight of abrasive) Here it is, a complete blasting solution in one portable package. The Perfect Storm Complete Mobile Blasting System (C.M.B.S.) has been developed in cooperation with the blasters who actually do the work so you can be sure it has the features, tough components & conveniences that help get the job done fast and right. At the heart of the system is the Soda Storm blast system which can blast with standard abrasives and soda for special cleaning & coating removal applications. Ease of deployment is the key feature of the Soda Storm C.M.B.S. You can spend well over an hour to load all the individual components, and another hour unloading them again and setting them up with a standard setup. The Soda Storm C.M.B.S. can be deployed and be ready to start blasting in about 5-10 minutes. Quick deployment not only makes this a great piece of equipment to own but is also a great option for rental houses to keep in their fleet. Start a Business or Add A Profit Center To Your Existing Business One way to turn the Perfect Storm C.M.B.S. into a profit center is to finance at a low monthly cost that is easy to recoup. We have run the numbers and financing through Charter 60mo comes out to a monthly cost of about $800-$850. Not very much for a full blasting setup. *may vary due to local taxes, interest rates, credit history, etc., First and last months payment due up front. Trailer For the platform of the Perfect Storm C.M.B.S. we chose this heavy duty 14,000 lbs GVW trailer. Trailer features include: Heavy Duty 12,000 lb BULLDOG Jack Space to accommodate pallet of media (media not included) Included spare tire Steps for easy access to equipment Fully adjustable ball or pintle ring Fully galvanized under deck piping linking compressor, air dryer & blaster

3 Available Accessories Blast/Breathing Hose Extensions Air Hose Extensions Air Hose Assemblies are used when equipment must be removed from the trailer to be located closer to the job site BLK Use these extensions when you need to reach farther than the included 50 will allow. 50' 1-1/4" BLAST HOSE/TWINLINE EXTENSION W/NYLON COUPLINGS RED RED RED AIR HOSE ASSEMBLY - FOR REMOTE DEPLOYMENT OF RESPIRATOR EQUIPMENT AIR HOSE ASSEMBLY - FOR REMOTE DEPLOYMENT OF 3.5 CU FT SODA STORM BLASTER AIR HOSE ASSEMBLY - FOR REMOTE DEPLOYMENT OF 6.5 CU FT SODA STORM BLASTER ' BREATHING AIR SUPPLY HOSE, 3/8" Job Timer Keep track of time spent on a job and total hours on your abrasive blaster. Know your cost, control your cost & set up a preventative maintenance program for your blast equipment. CO Monitoring Monitor and record Carbon-Monoxide levels with this CO-Monitor from RPB Respiratory. Keep your operators safe by installing this CO- Monitor to alarm you when toxic CO is entering your breathing hood. Check local codes for CO monitoring requirements. PB P DUAL TIMER CONTROL BOX W/KEY RESET & MOUNTING BRACKET Hot Tube Attach this Hot Tube to your respirator when working in cold weather to increase the temperature of your respirator air RPB GX4 GAS MONITOR WITH 12V DC BATTERY CLIPS, INCLUDES 10 PPM CO CARTRIDGE AUX STROBE LIGHT AND ALARM WITH 50FT CABLE, RPB GX4 GAS MONITOR HOT TUBE W/BSP THREAD & BELT Pirate Brand, All Rights Reserved

4 Pirate Brand Soda Storm TM S-SERIES BLASTERS Proudly Distributed By: Product Line Brochure Rev. May 12

5 What Can Soda Storm Blasters Do For You? The most common Food Industry Cleaning Application Soda Storm Also used for coating cleaning applications include: removal on: Graffiti Removal Automobile Restoration Fire Restoration Aviation Equipment Mold Remediation Marine Equipment Food Industry Industrial Equipment Engine Rebuiding Commercial Vehicles Commercial Restoration Cleaning Application Fire Restoration Cleaning Application Mold Remediation Cleaning Application 2 Engine Rebuilding Cleaning Application Marine Coating Removal Automotive Coating Removal 3

6 SPH HOW SODA STORM SYSTEMS WORK Pressure Hold Normally Closed Valves ADDING ABRASIVE Abrasive is added through the hole in the top of the Abrasive Blaster where the Pop-up and its seat are located. When abrasive is added, it flows down through the hole, around the Pop-up and, down to the bottom of the pressure vessel where it will exit through the Metering Valve when blasting is started. PRESSURIZATION Before pressurization can take place in a Soda Storm system, the Blow-down Valve must be closed. Then, when a compressed air source (such as an air-compressor) is connected to the inlet of the Abrasive Blaster and the Inlet Valve is opened, compressed air can flow through the Moisture Separator and Pressure Regulator into the pressure vessel causing the Pop-up (located internally) to seal against its seat allowing the pressure vessel to become pressurized. To blast at pressures less than the minimum required inlet pressure of 90PSI, the Pressure Regulator is used. When the control handle is activated, the Auto Air Valve and Metering Valve open allowing compressed air & abrasive to flow and mix. The mixture of compressed air and abrasive will now exit the Abrasive Blaster through a blast hose and nozzle connected to the coupling on the Metering Valve and blasting begins. DIFFERENTIAL PRESSURE When blasting using the Multi-Port Fixed Orifice Sleeve in the Metering Valve, differential pressure may be used to aid in the flow of abrasive. Differential pressure uses slightly higher pressure in the Pressure Vessel than in the Pusher Line to help push the abrasive through the small orifices in the Multi-Port Fixed Orifice Sleeve. Differential pressure is achieved by partially closing the Differential Pressure Gate Valve until the Differential Pressure Gauge is reading a slightly lower PSI than the Vessel Pressure Gauge. In addition to using differential pressure, the Vibrator may be used to aid in the flow of abrasive. Premium Features APVII Premium Metering Valve Premium Coupling DEPRESSURIZATION (BLOW-DOWN) When the control handle is released in a pressure hold (SPH) system, the pressure vessel remains filled with compressed air. The compressed air remaining in the pressure vessel is released when the inlet valve is manually closed and the blow-down valve is manually opened. Water Induction Nozzle SODA STORM Systems Soda Storm Systems Include: î Pirate Brand APVII Premum Multi-Port Fixed Oriface Sleeve for achieving infinite amount of flow rates - includes cleanout ball valve assembly & optional Tungsten Carbide Sleeve for heavier abrasive use î Moisture separator with 50 micron filter element î Galvanized piping for corrosion resistance î Heavy duty full port ball valves î Sanitary clean out coupling provides easy access to obstructions that may be bridging over the metering port î Abrasive flow assist vibrator with controls î Pressure regulator with liquid filled gauge î Differential pressure gate valve provides you with precision control of your abrasive flow rate î Blow-down muffler reduces noise î 50 ft. Ergo Flex blast hose is ergonomically friendly & helps eliminate operator fatigue î Water Induction Nozzle System (WIN ) for mininum water consumption & dual operation as a dry or wet blast nozzle î 150 psi (10.3 bar) Pressure Vessel - A.S.M.E. Section VIII Division 1 & CRN for all provinces î Lid and screen to keep pot free of contaminants î Valve guard to protect valves & gauges when transporting on 3.5 cu. ft. & 6.5 cu. ft. Soda Storm blasters Featuring The SODA STORM SODA BLASTING SYSTEM 3.5 cu. ft. & 1.5 cu. ft. Soda Storm Shown above with 55 Twinline Hose Assy Control Handle #2, WIN System, & 50 ft. Ergo Flex Blast Hose The APVII is our top-of-the-line metering valve & delivers the best possible performance combined with a low maintenance cost. Includes many premium features including a clean out port and The premium coupling that we use to attach the metering valve to the bottom of the pressure vessel was chosen for one simple purpose... quick & easy removal of the metering valve when necessary for Our WIN (water induction nozzle) System with simple hook up garden hose thread attachment is one of the best in the business. You ll enjoy the simplicity & reliability of this design. 4 multi-ported sleeve (shown next to valve). maintenance. You ll thank us for this one. 5

7 M R O T S A D O S Featuring The EM STING SYST SODA BLA 3 Sizes to Featuring SODA STOR Choose From 1.5 The SODA BL ASTING M SYSTEM cu. ft. (43 Liters) Portable Abrasive Blasters Pressure Hold (SPH) î SPH SODA STORM Systems î Featuring Normally Closed APVII Metering Valves 3.5 cu. ft. (100 Liters) Portable Abrasive Blasters Pressure Hold (SPH) Part Number: PB Part Number: PB 6.5 cu. ft. (185 Liters) Portable Abrasive Blasters Pressure Hold (SPH) 6 Part Number: PB VESSEL, PORTABLE, 1.5 CU. FT. (43 LITERS), 150 PSI (10.3 BAR) PRESSURE HOLD SYSTEM, SODA STORM, PNEUMATIC, INCLUDES APV II W/MULTI PORTED SLEEVE (STAINLESS STEEL), AUTO AIR VALVE, 1 PIPING W/MOISTURE SEPARATOR, LID, SCREEN, 55 TWINLINE HOSE ASSY, CONTROL HANDLE #2, 1 (50 ) ERGO FLEX BLAST HOSE W/COUPLINGS & #5 TUNGSTEN CARBIDE WATER INDUCTION NOZZLE SYSTEM VESSEL, PORTABLE, 3.5 CU. FT. (100 LITERS), 150 PSI (10.3 BAR) PRESSURE HOLD SYSTEM, SODA STORM, PNEUMATIC, INCLUDES APV II W/MULTI PORTED SLEEVE (STAINLESS STEEL), AUTO AIR VALVE, 1 PIPING W/MOISTURE SEPARATOR, LID, SCREEN, LOADING SKID/VALVE GUARD, 55 TWINLINE HOSE ASSY, CONTROL HANDLE #2, 1 (50 ) ERGO FLEX BLAST HOSE W/COUPLINGS & #5 TUNGSTEN CARBIDE WATER INDUCTION NOZZLE SYSTEM VESSEL, PORTABLE, 6.5 CU. FT. (185 LITERS), 150 PSI (10.3 BAR) PRESSURE HOLD SYSTEM, SODA STORM, PNEUMATIC, INCLUDES APV II W/MULTI PORTED SLEEVE (STAINLESS STEEL), AUTO AIR VALVE, 1-1/4 PIPING W/MOISTURE SEPARATOR, LID, SCREEN, LOADING SKID/VALVE GUARD, 55 TWINLINE HOSE ASSY, CONTROL HANDLE #2, 1 (50 ) ERGO FLEX BLAST HOSE W/COUPLINGS & #5 TUNGSTEN CARBIDE WATER INDUCTION NOZZLE SYSTEM 7

8 î Blasting Set-Up î î Blasting Set-Up î A ve a H st oda u M r S fo sting Bla î Available Accessories î NOVA 2000 ASTRO A ve a H t s a Mu r Sod g fo stin Bla PNEUMATIC PUSH BUTTON 8 9

9 The S-Series Product Family DRY LAND Featuring The TEM AIR DRYING SYS Bulk Blaster Kits Small Blaster Kits 10 11

10 About Pirate Brand At Pirate Brand, we know abrasive blasting. We have fused our 100+ years of combined experience in the blasting industry with feedback from distributors and end-users to produce abrasive blast equipment and replacement parts that are second to none. In addition to our extensive line of blasting equipment, we produce a full line of aftermarket parts that are 100% compatible replacements for other blast equipment manufacturers. We believe in quality, reliability and productivity so we subject all our products to strict quality control testing to ensure the best possible performance is achieved. In the tough world of abrasive blasting, quality is crucial,...and Pirate Brand delivers Pirate Brand, All Rights Reserved