ASSEMBLY & OPERATION INSTRUCTIONS (HS-PZ002)

Transcription

1

2 FOR OUTDOOR USE ONLY ASSEMBLY & OPERATION INSTRUCTIONS (HS-PZ002) Outdoor Charcoal Pizza Oven

3 PART LIST Part Number Part Name Supplier Code 1 smoke pipe PZ smoke pipe handle PZ body PZ body back plate PZ charcoal collect box PZ thermometer PZ door handle PZ door PZ charcoal ash grid PZ firebrick PZ control plate PZ cart handle PZ spade PZ cart leg-l PZ cart body support plate PZ cart leg-r PZ cart bottom grid PZ wheel PZ wheel axle PZ00219

4 1. cart leg L 2pcs 2. cartleg R...2pcs 3. cartbodysupport plate...1pc 4.cart handle 1pc 5.cart bottom grid...1pc 6.body... 1pc 7.smoke pipe 1pc 8. smoke pipe handle...1pc 9.door.....1pc 10.charcoalcollectbox...1pc 11.spade.1pc 12.wheel axle..2pcs 13. wheel 2pcs 14.charcoal ash grid..1pc 15. firebrick 16pcs Warning For outdoor use only. Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment. Warning: accessible parts may be very hot. Keep young children away. Do not move the appliance during use. Any modifications of the appliance may be dangerous.

5 Bolt: M6x15 Hardware Pack Bolt: M6x45 A 22 pcs B 4 pcs Bolt: M6x30 Flat washer M10 C 8 pcs D 2 pcs Bolt: M6x40 Flat washer M6 E 8 pcs F 4 pcs Lock nut M10 skid resistance nut M6 G 2 pcs H 34pc Spanner screwdriver I 1pc J 1pc

6 Assembly Instructions Remove all contents from packaging, and make sure all parts are present before attempting to assemble! Tighten all bolt connections by hand first. When the OVEN is fully assembled, go back and tighten. STEP 1 Assemble thecart leg L(Part 1), cart leg R(Part 2)andcarthandle (Part4)to thecart body support plate(part3)as shown.use the Bolt A, Bolt C, Nut H tighten. STEP 2 Assemble the Wheel(part 13)to the cart leg R as shown. Use the wheel axle(part 12), flat washer D, Nut G tighten.

7 STEP 3 Assemble the cart bottom grid (part 5) to the cart leg as shown. Use Bolt E,Nut H tighten. STEP 4 Assemble the body(part 6)to the cart as shown. Use Bolt A tighten.

8 STEP 5 Assemblethe smoke pipe handle (part 8) to smoke pipe (part 7),then assemblethe smoke pipe to body as shown. Use Bolt B,flat washer F tighten. STEP 6 Place thecharcoal ashgrid (part 14), firebrick (part 15) into body as shown.

9 STEP 7 Place thedoor(part 9) into body as shown. STEP 8 Place the charcoalcollect box(part 10) into body as shown.

10 Fully-Assembled

11 Oven Operating Guidelines Lighting the oven solid fuel is to be used for this product (fire wood, charcoal etc.) place solid fuel onto the fire bricks and light using fire starters close oven door and let the solid fuel burn (check occasionally to ensure fire is lit) Cooking monitor heat inside oven via temperature gauge recommended temperature for cooking pizza is 230 to 250 degrees Celsius once desired temperature is reached, move solid fuel to the side to create cooking space on the fire bricks place pizza (or desired food) on the fire bricks to cook regularly monitor temperature to ensure pizza/food is not under or over cooked smoke pipe handle can be used to control smoke and temperature within oven when door is closed/sealed Cleaning once finished cooking, remove left over solid fuel ashes can be removed via the charcoal collect box (ash tray) always ensure oven is clean and free from oil or grease (internally and externally) to ensure longevity of the oven always keep oven dry and under cover to protect from weather and moisture Pre-caution always ensure hands are protected when placing or removing food from oven always ensure oven is cool before touching or cleaning the internal areas do not subject the charcoal bricks to sudden changes in temperature as this might damage the bricks

12 Jumbuck Warranty Thank you for purchasing one of our quality Jumbuck Outdoor Charcoal Pizza Oven. YOUR JUMBUCK OUTDOOR CHARCOAL PIZZA OVEN IS COVERED AGAINST DEFECTS FOR A PERIOD OF 12 MONTHS FOR PARTS AND LABOUR, REPAIR OR REPLACEMENT THIS WARRANTY EXCLUDES SURFACE RUST AND DAMAGE CAUSE BY ABUSE OR NEGLECT CONDITIONS OF THE WARRANTY. The appliance must be operated and maintained in accordance with the instructions supplied in the operating manual.. Any repair does not extend the warranty period.. Any parts other than original Jumbuck parts will Void this warranty. FOR WARRANTY CLAIMS This warranty for Australia is given by : Genesis Australia Corporation Pty Ltd 2/26 Industry St Malaga WA service@genesiscorp.com.au The warranty for New Zealand is given by Bunnings NZ Ltd, PO Box 14436, Panmure, Auckland, 1741 Tel: Fax: Marketing@bunnings.co.nz Any claim under this warranty must be made within 12 months from the date of purchase of the product. Proof of purchase must be presented. For Australian Customers To make a claim under the warranty please contact service@genesiscorp.com.au or return the product (with proof of purchase) to any Bunning store. (see. for store locations) Genesis Australia Corporation Pty Ltd bears reasonable, Direct expenses of claiming under the warranty. You may submit details and proof to us for consideration. The warranty covers manufacturer defects in materials, workmanship and finish under normal use. This warranty is provided in addition to other rights and remedies you may have under law: our goods come with guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or refund for a major failure and to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. For New Zealand Customer To make a claim under the warranty, take the product (with proof of purchase ) to any Bunnings store (see ) for store locations. The warranty covers manufacturer defects in materials, workmanship and finish under normal use. This warranty is provided in addition to other rights and remedies you may have under law: our goods come with guarantees which cannot be excluded under the Consumers Guarantees Act 1993 (NZ). You are entitled to replacement or refund for a major failure and to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please thoroughly read conditions of warranty

13 WHAT IS NOT COVERED IN THE WARRANTY Removal or re-installation costs. This warranty does not cover costs for transit, nor in home service Liability will only be accepted for loss or damage during transit if at the time the product was being transported by Bunnings or a Bunnings approved contractor. Lack of maintenance, abuse, neglect, misuse, accidental or improper installation of this appliances Scratches, dents, corrosion or discoloration caused by heat, abrasive chemicals cleaners Corrosions or damage caused by exposure to elements such as insects, weather, hail or grease and fat fires Rusting of grill Cleaning and wear and tear, service calls of this nature are chargeable Commercial use of this product Unauthorized repairs or modification during warranty period FOR TECHNICAL ASSISTANCE For Australia customers if you experience any technical issues with your JUMBUCKOutdoor Charcoal Pizza Oven, in the first instance review the instructions manual or contact the warranty service agent. For New Zealand customers if you experience any technical issues with your JUMBUCK Outdoor Charcoal Pizza Oven, in the first instance review the instructions manual or contact your local Bunnings warehouse FOR SPARE PARTS Call your local Bunnings warehouse and ask them to order a part for you. You should provide the following information: Model of Oven... Year of purchase... Name of warranty service company above... Part that requires replacement (refer to the list of spare parts in the instructions manual)... RECORD THE FOLLOWING INFORMATION Attached the copy of the purchase receipt here Date of Purchase... Purchased From... Location... Model Name and Number... Receipt Number... Note: The serial number is located either on the outside of the packing carton or outside or inside the appliance